Commercial kitchen benches for Australian restaurants, cafes and catering kitchens — stainless steel work benches, prep tables and utility benches with drawers, undershelves and waste stations built for daily commercial prep. This collection focuses on working benches: if you're after the broader bench range including leg styles and custom lengths, see our main stainless steel benches, or go straight to benches with splashbacks for against-wall prep lines.
Who commercial kitchen benches are for
The bench is the most-used piece of equipment in any kitchen — every dish crosses it. Cafes and food trucks fit compact 304-grade tables where space is tight; restaurants run longer work benches with drawers and undershelves so tools and trays live at the point of use; caterers and pop-ups favour folding stainless tables that pack down between events. If a surface touches food prep daily, it should be commercial-grade stainless, not domestic joinery.
What's in scope
Stainless steel work benches and prep tables
Flat-top benches on adjustable legs — the workhorse prep surface, available in economic 304-grade builds through to heavy-duty units.
Benches with drawers and undershelves
Work benches that add indexed drawer storage and a lower shelf, keeping tools, trays and dry stock within reach of the prep position.
Utility, waste and specialty benches
Waste-collection benches with scrap holes for plate clearing, utility benches with integrated sinks, and corner and infill units that complete a run. For wash-point benches see our single and double sink benches.
Folding stainless tables
Fold-leg benches for caterers, markets and venues that need prep surface on demand and flat storage the rest of the week.
How to choose a commercial kitchen bench in three steps
Picking the right commercial work bench comes down to three questions, in order.
Step 1 — Measure the run and the height
Measure the floor space the bench will occupy, allowing aisle clearance for staff to pass behind, and check working height against your team — most commercial benches sit around the standard 900mm mark with adjustable feet for uneven floors.
Step 2 — Pick the steel grade and build
304-grade stainless is the food-industry benchmark for prep surfaces — corrosion-resistant and rated for daily food contact. Check the grade and top thickness on each product page; economic ranges suit lighter prep, heavier-gauge tops take chopping, mincing and bulk work.
Step 3 — Choose the storage and extras
Decide what lives at the bench: drawers for tools, an undershelf for trays and bins, a splashback if it sits against a wall, or a scrap hole if it's a clearing station. Built-in storage saves buying separate shelving later.
Venue fit
A cafe gets going with one or two economic 304 tables; a restaurant prep line pairs work benches with drawer units and a waste bench at the dish end; caterers carry folding tables sized to their van. Browse by brand — Modular Systems and F.H.E both feature in this range — or add enclosed storage with our commercial kitchen cabinets.
A commercial kitchen bench is a freestanding stainless steel work table built for daily food preparation in professional kitchens — heavier gauge steel, food-safe surfaces and adjustable legs, unlike domestic benchtops. They come flat-topped or with drawers, undershelves, splashbacks and sink bowls depending on the station they serve.
What grade of stainless steel should a kitchen bench be?
304-grade stainless steel is the benchmark for commercial food-prep surfaces in Australia — it resists corrosion from food acids, salt and cleaning chemicals. Lower grades suit dry or light-duty areas, so check the listed grade on each product page and put 304 where food touches the surface daily.
What height is a commercial kitchen bench?
Standard commercial bench height is around 900mm, which suits most prep work, and adjustable feet let you level the bench on uneven commercial floors or fine-tune the working height. Check the listed height plus splashback height if the bench sits under shelving.
Should I get a bench with drawers or an undershelf?
Get both if the bench is a permanent prep station: drawers index knives, tools and smallwares at the point of use, while the undershelf holds trays, containers and bulk stock. A flat bench without storage suits flexible floor plans and clearing stations where the space underneath stays open.
Do commercial benches come with splashbacks?
Many models offer a splashback variant — a raised rear lip that protects the wall from splashes and meets the expectation for against-wall prep in food premises. Choose splashback versions for benches against walls and flat versions for island positions.
Do you deliver commercial kitchen benches across Australia?
Yes. Commercial Kitchen Store ships nationwide, including Brisbane and all metro and regional areas, with Australian-based phone support on 1300 111 901 to help plan your bench run. For cover details, see our warranty and service information.
The F.H.E 0600-6-WB is a stainless steel work bench that gives commercial kitchens a hard-wearing, hygienic prep and landing surface in a compact 600 x 600mm footprint at a 900mm working height.
Why operators choose this bench
1.2mm 304 grade stainless top — food-safe, corrosion-resistant and easy to wipe down between services.
Galvanised steel undershelf — doubles usable storage for trays, containers and equipment without cluttering the bench.
Height-adjustable galvanised legs — level the bench on uneven floors and dial in the working height.
220kg load rating — takes mixers, slicers and stacked stock with confidence.
Flat packed — ships compact and assembles on site to keep freight costs down.
Specifications
Brand
F.H.E
Model / MPN
0600-6-WB
Type
Stainless Steel Bench
Overall Dimensions
600 x 600 x 900mm
Top Material
1.2mm 304 grade stainless steel
Undershelf
Galvanised steel
Legs
Height-adjustable galvanised steel
Splashback
No (flat top)
Load Rating
220kg
Packed Dimensions
885 x 705 x 80mm
Warranty
2 Years Parts Only
Country of Manufacture
China
Venue suitability: Ideal for cafes, restaurants, bakeries and food trucks needing a compact, reliable prep or equipment-landing bench where a full-length bench will not fit.
Browse the full range of Stainless Steel Benches to pair this unit with matching widths and depths across your kitchen.
Installation & delivery: Supplied flat packed for easy self-assembly — no plumbing or power required. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is the top? The work surface is a 1.2mm 304 grade stainless steel top, the food-industry standard for corrosion resistance and hygiene.
What are the overall dimensions? The bench measures 600mm wide x 600mm deep x 900mm high.
How much weight can it hold? This 600mm-wide bench is rated to 220kg of evenly distributed load.
Does it have a splashback? No — this is a flat work bench with no splashback, giving an unobstructed surface against a wall or in the middle of a kitchen.
Does it come assembled? It ships flat packed for easy self-assembly, with height-adjustable galvanised legs to level it on site.
The F.H.E 1200-6-WBB is a 1200mm stainless steel work bench with a 100mm rear splashback that gives commercial kitchens a hygienic, hard-wearing surface for prep, plating and equipment staging.
Why operators choose the 1200-6-WBB
1.2mm 304 grade stainless top — food-safe, corrosion-resistant and easy to sanitise between services.
100mm rear splashback — protects the wall behind and keeps splatter off finished surfaces.
Galvanised undershelf & legs — full-width lower shelf for stock and a sturdy frame rated to a 275kg load.
Height-adjustable feet — level the bench on uneven kitchen floors.
Flat packed — ships compactly for straightforward on-site assembly.
Specifications
Brand
F.H.E
Model / MPN
1200-6-WBB
Type
Stainless Steel Bench
Top material
1.2mm 304 grade stainless steel
Undershelf & legs
Galvanised steel
Splashback height
100mm
Load capacity
275kg
Product dimensions
1200 x 600 x 900mm
Packed dimensions
620 x 1220 x 130mm
Adjustable feet
Yes
Assembly
Flat packed for self-assembly
Warranty
2 years parts only
Venue suitability: A 1200mm bench suits cafe, restaurant, bakery and commercial kitchen prep lines where a durable stainless work surface with wall protection is needed without taking up a large footprint.
Browse the full range of Stainless Steel Benches to size the right work surface for your kitchen layout.
Installation & delivery: Supplied flat packed for simple on-site assembly with adjustable feet for levelling. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is the top? The work top is 1.2mm 304 grade stainless steel, chosen for corrosion resistance and easy cleaning in food-prep environments.
What are the dimensions of the 1200-6-WBB? The bench measures 1200mm wide x 600mm deep x 900mm high, with a 100mm rear splashback.
How much weight can the bench hold? It is rated to a 275kg load across the work top.
Does it include an undershelf? Yes — a full-width galvanised steel undershelf is included, along with galvanised legs and adjustable feet.
What warranty does it come with? The bench is covered by a 2 year parts only warranty.
The Modular Systems 304-grade stainless steel workbench with splashback is a heavy-duty preparation bench built for commercial kitchens, cafes, butcheries and food-service prep lines. The range spans 16 sizes from 300 mm to 2400 mm wide in 600 mm or 700 mm depths, all standing 900 mm high with a 150 mm rear splashback. Each bench pairs a 1.2 mm 304-grade (18/8) stainless steel top with a solid stainless undershelf and adjustable stainless legs, giving you a hard-wearing, hygienic work surface that wipes clean and resists corrosion in busy wet areas.Why operators choose the Modular Systems WBB6 / WBB7 workbenches
304-grade stainless top — 1.2 mm 18/8 stainless resists rust, acids and daily sanitising, the food-safe standard for prep surfaces.
16 sizes, two depths — 300–2400 mm wide in 600 or 700 mm depth lets you match any bay, corner or full prep line.
Integrated 150 mm splashback — protects walls from splatter and keeps the wall-bench junction easy to clean.
Solid undershelf — height-adjustable stainless shelf doubles usable storage; an extra shelf can be added.
Reinforced construction — XPS-lined top with stainless U-channel bracing that increases with bench length to stop flex under load.
Adjustable feet — polished stainless disc feet level the bench on uneven floors; lockable castor kits are available.
Flat-packed for easy transport — supplied flat-packed with manual and tools for quick on-site assembly.
Specifications
Brand
Modular Systems
Range / MPN
WBB6 series (600 mm deep) & WBB7 series (700 mm deep)
Type
Stainless steel workbench with splashback & undershelf
Benchtop material
1.2 mm 304-grade (18/8) stainless steel, XPS-lined
Splashback
150 mm high, stainless steel, bevelled
Height
900 mm (plus 150 mm splashback)
Depths available
600 mm or 700 mm
Widths available
300–2400 mm (16 sizes)
Legs
1.2 mm stainless, 42 mm Ø, adjustable feet (6 legs on 2100 & 2400 mm)
Country of manufacture
China
Warranty
24 months parts only
Sizes, SKUs & pricing
Size (W × D × H)
SKU
Price
600 × 600 × 900 mm
WBB6-0600/A
$326.40
900 × 600 × 900 mm
WBB6-0900/A
$387.60
1200 × 600 × 900 mm
WBB6-1200/A
$448.80
1500 × 600 × 900 mm
WBB6-1500/A
$530.40
1800 × 600 × 900 mm
WBB6-1800/A
$612.00
2100 × 600 × 900 mm
WBB6-2100/A
$734.40
2400 × 600 × 900 mm
WBB6-2400/A
$809.20
300 × 700 × 900 mm
WBB7-0300/A
$292.40
450 × 700 × 900 mm
WBB7-0450/A
$326.40
600 × 700 × 900 mm
WBB7-0600/A
$340.00
900 × 700 × 900 mm
WBB7-0900/A
$401.20
1200 × 700 × 900 mm
WBB7-1200/A
$469.20
1500 × 700 × 900 mm
WBB7-1500/A
$557.60
1800 × 700 × 900 mm
WBB7-1800/A
$646.00
2100 × 700 × 900 mm
WBB7-2100/A
$754.80
2400 × 700 × 900 mm
WBB7-2400/A
$850.00
Venue suitabilityCompact 300–900 mm benches suit tight cafe corners, coffee stations and single-operator prep bays where floor space is limited. Mid-range 1200–1500 mm widths cover most kitchen workstations, while 1800–2400 mm benches give long, uninterrupted prep lines for high-volume restaurants, butcheries and catering kitchens. Choose the 700 mm depth (WBB7) when you need extra working room for large boards, trays or appliances; the 600 mm depth (WBB6) fits narrower walkways.Browse the full Modular Systems range or compare options across our commercial kitchen benches collection.Installation & deliveryThese benches are freestanding with no power or gas connection — they ship flat-packed with an instruction manual and assembly tools, and assembled options can be arranged. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by a 24-month parts-only warranty.Frequently asked questionsWhat size workbench should I choose?Match the width to your space: 300–900 mm for tight cafe and station setups, 1200–1500 mm for general workstations, and 1800–2400 mm for long prep lines. See our guide to 5 types of stainless steel benches for layout ideas.What is the difference between 600 mm and 700 mm depth?The 700 mm depth (WBB7 series) gives more working room for large trays, boards and benchtop appliances, while the 600 mm depth (WBB6 series) fits narrower walkways and tighter kitchens. Both are 900 mm high.Is the top 304 or 430 stainless steel?The benchtop is 1.2 mm 304-grade (18/8) stainless steel, which offers better corrosion resistance than 430 and is the preferred standard for food-contact prep surfaces.What is the splashback for?The 150 mm rear splashback protects the wall behind the bench from splatter and seals the wall-bench junction, making the area faster to clean and more hygienic. Learn more about why kitchens rely on stainless steel benches.Do the benches come assembled?They are supplied flat-packed with an instruction manual and the tools needed for assembly, designed for quick and simple setup. The 2100 mm and 2400 mm benches have 6 legs for added support.Can I add storage or mobility?Yes — the undershelf height is adjustable and an extra shelf can be added, while lockable castor kits and locking drawers are available on selected sizes.What warranty applies?Every workbench in the range carries a 24-month parts-only warranty.
The Modular Systems SWBD-6-1800 is a 304-grade stainless steel work bench with four drawers and a solid undershelf, built for heavy-duty commercial kitchen prep and storage. At 1800mm wide it gives a generous, corrosion-resistant work surface with organised tool and utensil storage below.
Why operators choose the SWBD-6-1800
304-grade stainless steel — corrosion-resistant, hygienic and easy to wipe down for food-contact areas.
Four pull-out drawers — keep utensils, tools and small wares organised and within reach.
Solid undershelf — doubles usable storage and adds frame rigidity for a stable work surface.
1800mm work surface — ample bench space for multi-stage prep without crowding.
Heavy-duty build, 80.3 kg — sturdy enough for demanding commercial use day in, day out.
Specifications
Brand
Modular Systems
Model / MPN
SWBD-6-1800
Type
Stainless steel work bench with drawers
Material
304 Stainless Steel
Drawers
4
Undershelf
Solid stainless undershelf
Product dimensions
1800(W) x 600(D) x 900(H)mm
Packed dimensions
1870(W) x 670(D) x 340(H)mm
Net weight
80.3 kg
Colour
Silver
Country of manufacture
China
Warranty
2 years parts only
Venue suitability: Suited to commercial kitchens, cafes, bakeries, butcheries and food-prep areas that need a durable stainless work surface with built-in drawer storage. Browse the full Stainless Steel Benches range or see the complete Modular Systems line-up for matching benching and storage.
Installation & delivery: Arrives assembled and ready to position — no power or plumbing required. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is the SWBD-6-1800? It is built from 304-grade stainless steel, the standard food-safe grade for commercial kitchen surfaces.
How many drawers does it have? Four pull-out drawers, plus a solid undershelf for additional storage.
What are the overall dimensions? 1800mm wide x 600mm deep x 900mm high.
How much does it weigh? The bench has a net weight of 80.3 kg.
What warranty does it come with? It is backed by a 2-year parts-only warranty.
The Modular Systems WBCB6-0600/A is a stainless steel corner workbench designed for commercial kitchen prep areas, featuring an integrated 150mm splashback and a height-adjustable solid undershelf. It ships flat-packed with all tools and an instruction manual for quick on-site assembly.
Why operators choose the WBCB6-0600/A
304-grade stainless construction — 1.2mm SUS304 (18/8) throughout body, undershelf, and splashback for long-term hygiene and corrosion resistance
XPS-reinforced benchtop — 20mm XPS board lining plus S/S 'U' channel reinforcements beneath the top panel for exceptional rigidity
Adjustable undershelf — height-adjustable with additional 'U' channel reinforcements; a second shelf can be added for extra storage
Adjustable levelling feet — 42mm diameter polished disc feet with fully adjustable height to compensate for uneven floors
Compact corner footprint — 600×600mm profile fills dead corner space while delivering a full 900mm worksurface height
Specifications
Brand
Modular Systems
Model / MPN
WBCB6-0600/A
Type
Corner Workbench with Splashback & Undershelf
Material
304 Stainless Steel (SUS304 18/8), 1.2mm gauge
Width
600mm
Depth
600mm
Height
900mm
Product Dimensions
600(W) x 600(D) x 900(H)mm
Packed Dimensions
670(W) x 930(D) x 275(H)mm
Net Weight
20.4 kg
Legs
1.2mm S/S, 42mm diameter; adjustable polished disc feet
Undershelf
1.2mm S/S; height-adjustable; U-channel reinforced
Splashback
150mm projection; 180mm high; 30mm thick; S/S-lined & bevelled; fully enclosed
Assembly
Flat-packed; includes instruction manual & tools
Country of Manufacture
China
Warranty
24 Months Parts Only
Venue suitability: Suited to restaurants, cafes, catering facilities, and food production kitchens requiring a compact corner bench solution that makes use of otherwise dead corner space. The 600×600mm footprint works in tight prep areas alongside other Modular Systems benches.
Browse our full range of stainless steel benches or explore the complete Modular Systems range for matching prep tables, sink benches, and shelving.
Installation & delivery: Arrives flat-packed with all assembly hardware and an instruction manual — most operators assemble in minutes with the included tools. Castor kits and locking drawer options are available. Dispatched Australia-wide.
Frequently asked questions
What steel grade is the WBCB6-0600/A? The entire bench — top, undershelf, legs, and splashback — is constructed from SUS304 (18/8) stainless steel at 1.2mm gauge.
How does the WBCB6-0600/A arrive? The bench ships flat-packed with all required tools and an instruction manual. Assembly is designed to be quick and straightforward.
Can I add more storage? Yes — an additional undershelf can be added, and optional locking drawers and castor kits are available from Modular Systems.
Can the feet be adjusted for uneven floors? Yes — the 42mm diameter stainless disc feet are fully height-adjustable to level the bench on uneven surfaces.
What is the splashback height? The splashback is 180mm high and 30mm thick, stainless-lined and bevelled, with a 150mm wall projection for effective splash coverage behind the work area.
Provide an excellent foundation for any professional kitchen with this stable and hygienic Vogue 1800mm stainless steel table. The adjustable height allows you to easily position the table exactly where it's needed, ideal for chefs of different heights. Also, the rubber soles prevent the table from sliding, creating a safe way for chefs to prep foods.With a 1.2mm thick stainless steel construction, the table is resistant to scratches and dents from use in busy kitchens and food prep areas. It also has a galvanised steel construction for the undershelf which further adds rigidity. The construction of this Vogue centre table makes it easy to clean, helping you to keep a hygienic surface at all times.
Product features
Dimensions 900(H) x 1800(W) x 900(D) mm
Material 304 Stainless Steel
Finish - external Polished stainless steel
Warranty 1 Year
Weight 51.5kg
Height adjustable for easy positioning
1.2mm thickness makes it resistant to scratches and dents
Galvanised steel undershelf further adds rigidity
Steel construction makes it easy to clean
Surface area: 1.62m²
Fixings included
Delivered flat packed for easy self assembly
Please note this item exceeds 30kg and as such our carrier may require assistance at point of delivery
Looking for a prep table that gives you extra room? Then the Vogue stainless-steel prep table will be the product for you.This prep table is height adjustable, reducing chefs back aches and making it perfect for long shifts. Also, the rubber soles stop the table from moving around preventing drops and spills.Made with stainless steel this table can resist constant daily use in even the most demanding kitchens and food prep environments, and the galvanised steel creates an easy to clean surface allowing staff to prevent cross contamination in the workplace. Product features Dimensions 900(H) x 1800(W) x 700(D)mm Material Stainless steel 430 Finish - external Polished stainless steel Warranty 1 Year Weight 38.1kg Surface area: 1.26m² Material thickness: 1.2mm - 18 Gauge Without splashback 430 stainless steel tabletop 410 stainless steel legs Galvanised steel undershelf Supplied flat packed for easy assembly Maximum load: 300kg Easy to clean for maximum hygiene Four feet included 1x self assembly table, including 1 shelf & fixings
Looking for a prep table that is perfect for commercial kitchens? Then the Vogue stainless-steel prep table with upstand will be the product for you.The reinforced steel legs are highly durable allowing the table to easily hold up to 250kg of weight at once, and the stainless-steel creates a naturally hygienic surface making it easy to clean.Also, the undershelf means chefs can store ingredients or cookware at close vicinity, maximising space in the kitchen and giving easy access for chefs.The rubber feet prevent scratches on the floor by stopping the table from moving around when using.The upstand stops utensils, cookware, and food from falling onto the floor creating a cleaner kitchen.
Product features
Dimensions 900(H) x 600(W) x 600(D)mm
Dimensions 900(H) x 900(W) x 600(D)mm
Dimensions 900(H) x 1200(W) x 600(D)mm
Dimensions 900(H) x 1500(W) x 600(D)mm
Dimensions 900(H) x 1800(W) x 600(D)mm
Material Stainless steel 430
Finish - external Polished stainless steel
Warranty 1 Year
Weight 44.64kg
Surface area: 1.08m²
Material thickness: 1.2mm - 18 Gauge
60mm splashback
430 stainless steel tabletop
410 stainless steel legs
Height adjustable galvanised steel undershelf
Supplied flat packed for easy assembly
Maximum load: 500kg
Easy to clean for maximum hygiene
Height with upstand: 960mm
1x self assembly table, including 1 shelf & fixings
The Modular Systems WB6-0600/A is a stainless steel flat workbench designed for commercial kitchens requiring a durable, self-assembly prep surface. Built from SUS304 (18/8) stainless steel throughout, it is supplied flat-packed with all tools and an instruction manual for quick on-site assembly.
Why operators choose the WB6-0600/A
304-grade stainless steel top — 1.2mm SUS304 (18/8) benchtop lined with 20mm XPS board and a stainless steel panel for rigidity and hygiene compliance.
Adjustable undershelf — 1.2mm stainless shelf with U-channel reinforcements; height is fully adjustable to suit varied storage needs.
Robust leg system — 42mm diameter, 1.2mm stainless steel legs with fully adjustable polished disc feet; lockable castor kits available separately.
High load rating — rated to 240kg for the 600mm-wide model, scaling to 480kg for the 2400mm-wide bench.
Flat-packed for easy transport — includes instruction manual and tools; leg brace option available instead of solid shelf on request.
Specifications
Brand
Modular Systems
Model / MPN
WB6-0600/A
Type
Stainless Steel Flat Bench
Width
600 mm
Depth
600 mm
Height
900 mm
Benchtop Material
SUS304 (18/8) Stainless Steel, 1.2mm
Benchtop Construction
Lined with 20mm XPS board & stainless panel; U-channel reinforcements beneath
Leg Diameter
42 mm
Leg Thickness
1.2 mm stainless steel
Feet
Fully adjustable polished stainless disc feet
Undershelf
Stainless steel 1.2mm; fully adjustable height; U-channel reinforcements
Load Rating (600mm wide)
240 kg
Load Rating (900mm wide)
280 kg
Load Rating (1200mm wide)
320 kg
Load Rating (1500mm wide)
360 kg
Load Rating (1800mm wide)
400 kg
Load Rating (2100mm wide)
440 kg
Load Rating (2400mm wide)
480 kg
Net Weight (600mm wide)
22 kg
Packed Dimensions
1270(W) x 670(D) x 185(H)mm
Warranty
2 Years Parts Only
Country of Manufacture
China
Venue suitability: Ideal for commercial kitchens, bakeries, cafes, restaurants, and catering operations requiring a hygienic, heavy-duty stainless prep bench. The flat/plain work surface suits prep, plating, and general kitchen workflow. Browse our full range of Stainless Steel Benches or explore more from Modular Systems.
Installation & delivery: Supplied flat-packed with all assembly tools and instruction manual. Optional leg brace (instead of solid undershelf) available — specify on purchase order. Dispatched Australia-wide.
Frequently asked questions
What steel grade is the benchtop?The benchtop is SUS304 (18/8) stainless steel at 1.2mm thickness, the same food-safe grade used across commercial kitchen equipment.
Can I get a leg brace instead of the solid undershelf?Yes. Modular Systems offers a free optional leg brace in place of the solid undershelf — simply specify "leg brace" on your purchase order when ordering.
How many legs does this bench have?The 600mm-wide WB6-0600/A has 4 legs. Wider models (2100mm and 2400mm) ship with 6 legs for extra support.
Can I add castors or extra shelves later?Yes. Lockable castor kits and additional shelves are available as optional accessories. Contact us for compatible part numbers.
What is the warranty on this workbench?The WB6-0600/A carries a 2-year parts-only warranty from Modular Systems.
Looking for a prep table that gives you extra room? Then the Vogue stainless-steel prep table will be the product for you.This prep table is height adjustable, helping to reduce chefs back aches and making it perfect for long shifts. Also, the rubber soles stop the table from moving around, preventing drops and spills.Made with stainless steel this table can resist constant daily use in even the most demanding kitchens and food prep environments, and the galvanised steel creates an easy to clean surface allowing staff to prevent cross contamination in the workplace. The 60mm splashback protects your walls from heat, oils, and cooking residue, reducing the need to clean your walls frequently. Product features Dimensions 900(H) x 1800(W) x 700(D)mm Material Stainless steel 430 Finish - external Polished stainless steel Warranty 1 Year Weight 37.7kg Surface area: 1.26m² Material thickness: 1.2mm - 18 Gauge 60mm splashback 430 stainless steel tabletop 410 stainless steel legs Height adjustable galvanised steel undershelf Supplied flat packed for easy assembly Maximum load: 300kg Easy to clean for maximum hygiene Four feet included 1x self assembly table, including 1 shelf & fixings
Stainless Steel Corner Workbench with Splashback and Solid Undershelf
100mm Splashback
900mm Wide x 900 mm deep × 900 mm high
Specially designed for quick & simple assembly
Comes with instruction manual & tools
Supplied flat-packed for ease of transport
Locking drawers available*
Legs
1.2 mm S/S; 42 mm Ø
Fully adjustable S/S polished disc feet that match the legs perfectly
Castor kits available (lockable)
Benchtops
1.2 mm material; SUS304 (18/8)
Llined with XPS board, 20 mm thick & S/S panel
Special S/S ‘U’ channel reinforcements under
As the bench size increases so does the number of channels
Undershelves
Height of shelf is fully adjustable, also an extra shelf can be added
1.2 mm S/S
Special ‘U’ channel reinforcements under to suit the bench type & size, and as the bench size increases so does the ‘U’ channel width; S/S 1.2 mm thick
Splashbacks
Stainless steel backing
All S/S lined & bevelled
180 mm high; 30 mm thick
Fully enclosed & folded under top (not gal. or open)
2 Years Parts only Warranty
Power:
The Modular Systems CDT-600R is a right-hand clean dish table that receives clean crockery, glassware and trays as they exit a pass-through commercial dishwasher, giving staff a hygienic, hard-wearing landing surface in a busy warewashing bay.
Why operators choose the CDT-600R
Compact 600mm footprint — fits tight pass-through layouts while keeping the full 700mm depth needed for commercial trays.
1.2mm 304-grade stainless top & body — food-safe and corrosion-resistant for daily commercial washdown.
150mm integrated splashback — shields the wall behind the table from water and steam.
Right-hand orientation — mates with pass-through dishwashers where clean dishes exit to the right.
210kg maximum load — holds full racks of plates, bowls and glassware without flex.
Adjustable stainless-clad bullet feet — level on uneven floors and easy to clean beneath.
Specifications
Brand
Modular Systems
Model / MPN
CDT-600R
Type
Clean Dish Table — Right Hand
Width
600 mm
Depth
700 mm
Height
900 mm
Splashback Height
150 mm
Body Construction
1.2 mm 304 Stainless Steel
Leg Construction
1.0 mm 201 Stainless Steel, 42 mm OD (2 legs)
Feet
Adjustable plastic bullet feet with stainless-steel cladding
Maximum Load
210 kg
Net Weight
10.4 kg
Product Dimensions
600 x 700 x 900 mm
Packed Dimensions
650(W) x 750(D) x 160(H) mm
Packaging
Carton box
Warranty
24 Months Parts Only
Country of Manufacture
China
Venue suitability: Suited to cafes, restaurants, hotels, aged-care kitchens, school canteens and contract caterers that need a compact right-hand dish landing table beside a pass-through dishwasher.
Pair it with our range of Commercial Stainless Steel Sinks and browse the wider Modular Systems benching range to complete your dishwasher bay.
Installation & delivery: The CDT-600R ships flat in a carton for safe transit. Level the adjustable feet on site — no tools required. Dispatched Australia-wide.
Frequently asked questions
What does the "R" in CDT-600R mean?The R denotes right-hand orientation — dishes exiting the dishwasher travel onto the table from the left, with the run continuing to the right. Choose the left-hand model if your dishwasher exits the other way.
What is the table made from?The top and body are 1.2 mm 304-grade stainless steel; the two legs are 1.0 mm 201-grade stainless steel with a 42 mm outer diameter.
How much weight can it hold?The CDT-600R is rated to a 210 kg maximum load — enough for several full racks of plates, bowls and glassware at once.
Does it include a splashback?Yes — a 150 mm high integrated splashback is included to protect the wall behind the table from water and steam.
What warranty is included?The CDT-600R carries a 24-month parts-only warranty.
The Modular Systems WB7-0800/A is a 800mm-wide stainless steel flat workbench designed for fast-paced commercial kitchens. Built from 1.2mm SUS304 (18/8) stainless steel with an XPS-insulated benchtop and a solid adjustable undershelf, it ships flat-packed for ease of transport and assembles quickly with the included tools and instruction manual.
Why operators choose the WB7-0800/A
304-grade stainless steel throughout — 1.2mm SUS304 (18/8) benchtop with XPS board lining and matching 42mm-diameter tubular legs resist corrosion and clean easily.
Solid adjustable undershelf — height-adjustable solid stainless steel undershelf keeps pots, pans, and equipment within reach; an extra shelf can be added as needed.
U-channel reinforcement — special 'U' channels under the benchtop maintain rigidity under heavy loads; reinforcement scales with bench size.
Adjustable disc feet — fully adjustable polished S/S disc feet level the bench on uneven floors and match the leg diameter for a clean finish.
Quick self-assembly — arrives flat-packed with instruction manual and assembly tools; no specialist installation required.
Specifications
Brand
Modular Systems
Model / MPN
WB7-0800/A
Type
Stainless Steel Flat Bench
Width
800 mm
Depth
700 mm
Height
900 mm
Product Dimensions
900(W) x 700(D) x 900(H)mm
Package Dimensions
770(W) x 870(D) x 185(H)mm
Net Weight
28.4 kg
Material (Benchtop & Undershelf)
1.2mm SUS304 (18/8) Stainless Steel
Material (Legs)
SUS304 (18/8) — 42mm diameter, polished disc feet
Benchtop Insulation
XPS board 20mm thick with S/S panel
Undershelf
Solid, height-adjustable SUS304 stainless steel
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to commercial kitchens, catering operations, food processing facilities, and hospitality venues requiring a sturdy fixed prep station. The 800mm width provides ample prep area while the 700mm depth fits standard kitchen layouts. Optional drawers (sold separately under Stainless Steel Accessories) and a leg-brace kit are available.
Explore our full range of stainless steel benches or browse all Modular Systems equipment for compatible shelving, drawers, and accessories.
Installation & delivery: Arrives flat-packed with assembly hardware and instruction manual — no tradesperson required. Specify leg brace on purchase order if required instead of the standard solid undershelf. Dispatched Australia-wide.
Frequently asked questions
What is the difference between the 800mm bench width and the 900mm product width?The 800mm measurement refers to the benchtop working surface width. The overall product width including leg flanges measures 900mm — use the 900mm figure when planning floor space.
Can I substitute the solid undershelf for a leg brace?Yes — the WB7-0800/A is supplied with a solid undershelf as standard. A leg brace is available as a free option; specify this on your purchase order when ordering.
What grade of stainless steel is used?The benchtop, undershelf, and legs are all SUS304 (18/8) stainless steel at 1.2mm thickness — a food-grade, corrosion-resistant alloy suited to commercial kitchen environments.
Is assembly required, and what tools are needed?Yes, the bench is supplied flat-packed for easy transport. All necessary assembly tools and an instruction manual are included — no additional tools are required.
Can optional drawers be added?Yes — locking drawers are available as separate accessories. See the Stainless Steel Accessories range or ask our team for compatible drawer units for the WB7 series.
The Modular Systems WB7-1000/A is a 1000 mm wide stainless steel flat workbench that delivers a hygienic, heavy-duty prep surface with an adjustable solid undershelf — arriving flat-packed for easy transport and quick assembly with included tools and instructions.
Why operators choose the WB7-1000/A
SUS304 (18/8) benchtop — 1.2 mm food-safe stainless steel over 20 mm XPS board with U-channel reinforcement for a solid, warp-resistant surface
Adjustable undershelf — 1.2 mm stainless steel shelf with U-channel reinforcement; height-adjustable to suit your storage needs
42 mm polished disc feet — fully adjustable for uneven floors; optional castor kits available for mobile setups
Flat-pack delivery — designed for quick and simple assembly with all tools and an instruction manual included in the box
Optional drawers & locking accessories — compatible with Modular Systems stainless steel drawer and accessory range
Specifications
Brand
Modular Systems
Model / MPN
WB7-1000/A
Type
Stainless Steel Flat Bench
Width
1000 mm
Depth
700 mm
Height
900 mm
Product Dimensions
1000(W) x 700(D) x 900(H) mm
Packed Dimensions
770(W) x 1070(D) x 185(H) mm
Net Weight
33.6 kg
Benchtop Material
1.2 mm SUS304 (18/8) stainless steel with 20 mm XPS board backing
Leg Material
1.2 mm stainless steel, 42 mm diameter
Undershelf Material
1.2 mm stainless steel, adjustable height
Assembly
Flat-pack; tools and instruction manual included
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to commercial kitchens, cafes, catering operations, food processing facilities, and institutional kitchens requiring a reliable, easy-to-clean prep bench. Explore the full stainless steel benches range or browse all Modular Systems equipment for matching accessories, shelving, and drawers.
Installation & delivery: Arrives flat-packed — assemble on-site with the included tools and instruction manual. Adjustable feet accommodate uneven floors; castor kits available as an optional add-on. Dispatched Australia-wide.
Frequently asked questions
What is the benchtop thickness and grade?The benchtop is 1.2 mm SUS304 (18/8) stainless steel, lined with a 20 mm XPS board for rigidity and backed with a stainless steel panel.
Can I add drawers to this workbench?Yes. The WB7-1000/A is compatible with the Modular Systems stainless steel drawer range (sold separately through the Modular Systems accessories range). Locking drawers are also available.
Is the undershelf height adjustable?Yes. The solid stainless steel undershelf is fully height-adjustable, and an additional shelf can be added to increase storage capacity.
Does the bench arrive assembled?No — the WB7-1000/A is supplied flat-packed for ease of transport. All tools and an instruction manual are included; assembly is designed to be quick and simple.
What warranty does the WB7-1000/A carry?The bench is covered by a 2 Years Parts Only warranty from Modular Systems.
The Modular Systems WBB7-0800/A is a 304-grade stainless steel workbench with splashback designed for commercial kitchen prep areas, providing a hygienic, durable surface with integrated undershelf storage and rear splash protection.Why operators choose the WBB7-0800/A
304 stainless construction — SUS304 (18/8) benchtop resists corrosion and meets commercial hygiene standards
Integrated splashback — 150mm high, 30mm thick, all S/S lined & bevelled, keeps walls clean behind the prep area
Solid adjustable undershelf — 1.2mm S/S with U-channel reinforcements; height fully adjustable for flexible storage
Quick flat-pack assembly — supplied with instruction manual and tools; no specialist installer required
Adjustable levelling feet — polished S/S disc feet on 42mm Ø legs accommodate uneven floors
Specifications
Brand
Modular Systems
Model / MPN
WBB7-0800/A
Type
Stainless Steel Work Bench with Splashback
Material
304 Stainless Steel (SUS304 18/8)
Benchtop Gauge
1.2mm
Leg Gauge
1.2mm S/S, 42mm Ø
Undershelf Gauge
1.2mm S/S
Splashback Height
150mm
Splashback Thickness
30mm
Width
800mm
Depth
700mm
Height
900mm
Product Dimensions
800(W) x 700(D) x 900(H)mm
Packed Dimensions
770(W) x 870(D) x 275(H)mm
Net Weight
28 kg
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to cafes, restaurants, fast food kitchens, catering operations, and institutional kitchens requiring a compact 800mm prep station. The flat-pack design makes it practical for tight delivery access. Browse our full range of Stainless Steel Benches or explore all Modular Systems equipment.Installation & delivery: Supplied flat-packed with instruction manual and assembly tools. No special installation required — adjustable feet level on uneven floors. Castor kits available separately for mobile setups. Dispatched Australia-wide.Frequently asked questionsWhat grade of stainless steel is used? The benchtop is 1.2mm SUS304 (18/8) stainless steel — the standard commercial kitchen grade for corrosion resistance and food-safety compliance.Is the undershelf height adjustable? Yes. The solid 1.2mm S/S undershelf is fully height-adjustable, and an extra shelf can be added if needed.Can I substitute a leg brace for the solid undershelf? Yes — a free optional leg brace is available instead of the solid shelf. Specify leg brace on your purchase order if required.Are drawers available for this bench? Locking drawers are available as an optional accessory — refer to the Stainless Steel Accessories range for compatible drawer units.Does this bench come assembled? No — it is supplied flat-packed for ease of transport, with an instruction manual and all required assembly tools included.
The Modular Systems WBB7-1000/A is a 1000mm wide commercial stainless steel work bench with splashback and solid undershelf, designed for heavy-duty food preparation in professional kitchen environments.
Why operators choose the WBB7-1000/A
SUS304 (18/8) benchtop — 1.2mm food-grade stainless steel with XPS board insulation for rigidity and hygiene
150mm splashback — all-stainless, lined and bevelled, keeps walls dry during prep and washdown
Solid undershelf — 1.2mm SS with U-channel reinforcement; height-adjustable for flexible storage of pots, pans, and equipment
Quick-assembly design — supplied flat-packed with instruction manual and tools; 4 fully adjustable polished-disc feet included
Optional accessories — leg brace (instead of solid shelf), locking castor kit, and drawer units available
Specifications
Brand
Modular Systems
Model / MPN
WBB7-1000/A
Type
Stainless Steel Work Bench with Splashback
Width
1000 mm
Depth
700 mm
Height
900 mm
Product Dimensions
1000(W) x 700(D) x 900(H) mm
Package Dimensions
770(W) x 870(D) x 275(H) mm
Net Weight
33.4 kg
Benchtop Material
SUS304 (18/8) stainless steel, 1.2mm gauge
Benchtop Insulation
XPS board 20mm thick with S/S panel
Legs
1.2mm S/S, 42mm diameter with fully adjustable polished disc feet
Leg Count
4
Undershelf
Solid 1.2mm S/S, height-adjustable, U-channel reinforced
Splashback
150mm high, 30mm thick; all S/S lined & bevelled
Power
Non-powered
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to restaurants, cafes, hotel kitchens, catering operations, and food production facilities requiring a reliable stainless prep surface. Ideal for establishments needing 1000mm of bench run with integrated splash protection and under-bench storage.
Browse the full Stainless Steel Benches range or explore the complete Modular Systems catalogue for matching shelving and accessories.
Installation & delivery: Supplied flat-packed for ease of transport. Simple bolt-together assembly with included tools and instruction manual. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is the benchtop?The benchtop is SUS304 (18/8) stainless steel at 1.2mm gauge, reinforced with XPS board insulation and S/S panel underneath.
Does the splashback come attached?Yes — the splashback and undershelf ship with the unit and are included in the flat-pack assembly. No separate purchase required.
Can I get a leg brace instead of the solid undershelf?Yes. A leg brace is available as a free optional substitute for the solid shelf — specify leg brace on your purchase order at the time of purchase.
Are drawers available for this bench?Locking drawer units are available as an optional accessory. Contact the team to add drawers to your order.
What is the warranty on the WBB7-1000/A?This bench carries a 2 Years Parts Only warranty from Modular Systems.
Modular Systems 304 Grade Stainless Steel Waste Collection Bench with Scrape Hole SWCB-7-1200R
Stainless Steel Waste Collection
The Modular Systems 304 Grade Stainless Steel Waste Collection Bench with Scrape Hole SWCB-7-1200R is designed for fast, hygienic waste disposal and efficient kitchen workflow. Its durable 304 stainless steel construction, integrated waste hole, and practical 1200 mm workspace make it ideal for commercial food preparation and cleaning areas.
Product Overview
This stainless steel waste collection bench provides a high-performance, hygienic solution for busy commercial kitchens. The integrated scrape hole allows staff to quickly remove food scraps into a bin below, maintaining a cleaner workspace while improving efficiency. Built from 304 grade stainless steel, it offers excellent resistance to corrosion and is easy to clean, making it suitable for heavy daily use.
Key Features and Specifications
Constructed from 304 grade stainless steel for long-lasting durability
Integrated waste scrape hole for quick and efficient waste handling
Ideal working dimensions: 1200 mm (W) x 700 mm (D) x 900 mm (H)
Includes 100 mm splashback to protect surrounding walls
Easy to clean and maintain in commercial environments
Supported by a 2-year parts-only warranty
Benefits for Commercial Kitchens
Improved Hygiene
The smooth stainless steel surface allows for fast cleaning while the scrape hole reduces mess and waste buildup on the bench surface.
Increased Efficiency
Food scraps and waste can be disposed of immediately, streamlining preparation and cleanup processes in high-volume kitchen environments.
Reliable Performance
Designed for daily use in restaurants, cafes, catering facilities, and industrial kitchens, the bench maintains structural integrity and cleanliness even under heavy workloads.
Recommended Applications
Commercial food preparation areas
Dishwashing and cleanup zones
Cafes, restaurants, and catering operations
Institutional kitchens
Food processing workstations
Care and Maintenance
Clean regularly with warm water and mild detergent
Avoid harsh chemicals that may damage stainless steel
Empty waste bins frequently to maintain hygiene
Periodically polish the surface to preserve appearance
Warranty
This product includes a 2-year parts-only warranty, offering confidence and support for long-term commercial use.
Purchase now!
Enhance the efficiency and hygiene of your kitchen with the Modular Systems 304 Grade Stainless Steel Waste Collection Bench. Add this commercial-grade waste solution to your workspace today.
Commercial Grade 201 Stainless Steel Folding Table – Portable Kitchen Bench, Ideal for Bar and Simply Stainless Folding Solutions
Looking for a table that can be easily moved while remaining sturdy? Then the Vogue stainless steel folding table will be perfect for you. Thanks to the folding ability this table is perfect for busy mobile caterers and space-conscious chefs.Also the quick and easy assembly means less staff are needed to assemble, saving time during those busy periods of preparation. Boasting the robust material allows for heavy items to be placed onto the table without the worry of it breaking while preparing food - so you can continue to work without struggling for room.And the table is made of stainless steel making it easy to clean and extremely resilient. Spills can be easily cleaned up while remaining long-lasting and durable. Featuring the 4 feet enables the table to remain stable from all angles without needing support to stay upright reducing the risk of items breaking or falling.
Product Features
Stainless Steel Collapsible Tables — Product Details
Durable, foldable stainless steel worktable ideal for food preparation, outdoor catering and compact storage in commercial kitchens, warehouses or home use across Australia. The collapsible, foldable design makes the table lightweight to move yet robust enough for heavy use and reliable food prep tasks.
Load capacity: 150kg (load)
Dimensions: 900(H) x 1800(W) x 600(D) mm — work surface size: 1.08 m²
Height: 900mm with adjustable feet for stable, level use on uneven floors
Material: constructed from food grade 304 stainless steel components with a polished 430 stainless steel external finish and durable 201 stainless steel legs
Material thickness: 1.2mm (18 Gauge) — resistant to corrosion and easy to wipe clean
Weight: 28kg — lightweight yet practical and stable
Design: folding stainless steel, collapsible for compact storage underneath shelves or in a warehouse; compatible with common table accessories and sink cutouts
Includes 4 feet and adjustable feet for tailored height and hygiene-friendly clearance underneath
Finish: polished sheet surface ideal for food preparation, chopping and prep work; suitable for food grade environments
Delivered flat packed for easy self-assembly — reduces shipping cost and simplifies delivery
Warranty: 1 Year — reliable construction for continuous commercial use
Practical features: wipeable surface, compatible with cloth or cleaning wipes, space-saving foldable design for compact storage
Typical applications: food prep benches, stainless steel bench backup, catering prep tables, prep stations near a sink or delivery area
Availability & delivery: nationwide delivery across Australia; check shipping and delivery times and shipping cost at checkout — ideal for Bunnings stocking or direct warehouse delivery
Load & size considerations: 600mm depth provides a generous work surface while maintaining compact footprint; 1800mm width offers ample prep area for chopping, plating and accessory placement
This folding stainless steel worktable is corrosion resistant, practical for busy kitchens and compatible with a range of accessories to create a complete food preparation station. Contact us for product details, availability and delivery options.
The Modular Systems WBM7-0600/A is a 600mm-wide mobile stainless steel workbench that provides a hygienic, flexible prep surface for busy commercial kitchens. Supplied flat-packed for easy transport and fitted with four lockable castors for effortless repositioning, it is built from 1.2mm SUS304 (18/8) stainless steel with a hairline-finish benchtop and an adjustable undershelf for organised storage.
Why operators choose the WBM7-0600/A
All-lockable castor mobility — four castors, all lockable, let you reposition or lock the bench in seconds without tools.
304-grade stainless steel throughout — 1.2mm SUS304 (18/8) benchtop with hairline finish and matching 42mm-diameter tubular legs in BA finish resist corrosion and clean easily.
XPS-insulated benchtop — 20mm XPS board with SUS430 panel lining under the top reduces noise and condensation on the work surface.
U-channel reinforcements — special 'U' channels under the benchtop maintain rigidity even under heavy loads.
Quick self-assembly — arrives flat-packed with instruction manual and assembly tools; no specialist installation required.
Specifications
Brand
Modular Systems
Model / MPN
WBM7-0600/A
Type
Mobile Workbench
Width
600 mm
Depth
700 mm
Height
900 mm
Product Dimensions
600(W) x 700(D) x 900(H)mm
Package Dimensions
770(W) x 670(D) x 185(H)mm
Net Weight
25.6 kg
Material (Benchtop & Undershelf)
1.2mm SUS304 (18/8) Stainless Steel — Hairline finish
Material (Legs)
SUS304 (18/8) — BA finish, 42mm diameter
Benchtop Insulation
XPS board 20mm thick with SUS430 panel
Castors
4 × lockable castors (all lockable)
Undershelf
Adjustable SUS304 stainless steel
Splashback
None
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to commercial kitchens, catering operations, food processing facilities, and hospitality venues requiring a mobile prep station that can be repositioned between service areas. The compact 600mm width makes it ideal for tight kitchen layouts and pass-through spaces.
Explore our full range of stainless steel benches or browse all Modular Systems equipment for compatible shelving, drawers, and accessories.
Installation & delivery: Arrives flat-packed with assembly hardware and instruction manual — no tradesperson required. Optional drawers are available separately (see Stainless Steel Accessories). Dispatched Australia-wide.
Frequently asked questions
Are all four castors lockable?Yes — all four castors on the WBM7-0600/A are lockable, keeping the bench firmly in position during prep work.
Does the bench come with a splashback?No. The WBM7-0600/A is supplied without a splashback. Splashback models are available separately in the Modular Systems range.
What grade of stainless steel is used?The benchtop, undershelf, and legs are all SUS304 (18/8) stainless steel — a food-grade, corrosion-resistant alloy suitable for commercial kitchen environments.
Is assembly required, and what tools are needed?Yes, the bench is supplied flat-packed for easy transport. All necessary assembly tools and an instruction manual are included — no additional tools are required.
Can optional drawers be added?Yes — optional drawers are available as separate accessories. See the Stainless Steel Accessories range for compatible drawer units.
Modular System High Quality Stainless Steel Bench with splashback SWCB-7-1200L Key Features 700mm Deep + 900mm High + 100mm splashback Width (mm): 1200 2 Years Parts only WarrantyPower:
The Modular Systems 1200-6-WB-S is a set of stainless steel legs with a double centre brace designed for 600mm-deep modular commercial kitchen bench systems. Engineered to provide a stable, hygienic underframe for modular workbench configurations, these legs deliver the structural foundation for a range of bench-top and sink units across the Modular Systems range.Why operators choose the 1200-6-WB-S
Double centre brace — adds rigidity across the 1200mm span, reducing flex under load in busy kitchen environments.
600mm depth — matches standard 600-series Modular Systems bench and sink tops for seamless integration.
Stainless steel construction — hygienic, corrosion-resistant, and easy to clean in commercial wash-down environments.
900mm working height — standard commercial kitchen bench height for ergonomic food preparation.
Modular system compatibility — designed to pair with Modular Systems bench tops, sink units, and accessories for a configured run.
Specifications
Brand
Modular Systems
Model / MPN
1200-6-WB-S
Type
Stainless Steel Legs with Double Centre Brace
Width
1200 mm
Depth
600 mm
Height
900 mm
Product Dimensions
1200(W) x 600(D) x 900(H)mm
Packed Dimensions
670(W) x 1270(D) x 200(H)mm
Material
Stainless Steel
Warranty
1 Year Parts Only
Venue suitability: Suited to commercial kitchens, cafe fit-outs, food production facilities, and hospitality venues requiring a modular bench configuration. Ideal for operators building a custom workbench or sink run using the Modular Systems range. Browse our full range of Commercial Stainless Steel Sinks and Modular Systems to complete your bench configuration.Installation & delivery: These legs arrive flat-packed and are assembled on-site using standard tools. No electrical or gas connection required. Dispatched Australia-wide.Frequently asked questionsWhat bench tops are compatible with the 1200-6-WB-S?These legs are designed for the Modular Systems 600mm-deep range. Pair them with a matching 1200mm-wide bench top or sink unit from the Modular Systems catalogue.What is the working height?The legs set a working height of 900mm, which is the standard commercial kitchen bench height.What warranty applies?The 1200-6-WB-S carries a 1 Year Parts Only warranty from Modular Systems.Can these legs support an undershelf?The double centre brace design provides the structural support needed for additional shelving components. Refer to the Modular Systems range for compatible undershelf accessories.Are these legs suitable for a wet area?Yes — stainless steel construction makes these legs suitable for wet prep and wash-down areas typical of commercial kitchens.
The Modular Systems 1500-6-WB-S is a set of stainless steel bench legs with double centre brace designed to support commercial modular workbench tops in professional kitchen environments. At 1500mm wide and 600mm deep, this leg assembly provides a stable, heavy-duty structural foundation for countertop units across the full 1500mm span.Why operators choose the 1500-6-WB-S
Full 1500mm span — covers the complete width of a 1500mm bench top without intermediate supports breaking up under-bench storage space.
Double centre brace — additional lateral bracing delivers rigidity under heavy load, preventing racking in busy prep environments.
600mm depth — compatible with the standard 600mm deep modular bench and sink top range.
900mm working height — industry-standard bench height for standing food preparation.
Stainless steel construction — hygienic, corrosion-resistant, and suited to wet and chemical-wash kitchen conditions.
Specifications
Brand
Modular Systems
Model / MPN
1500-6-WB-S
Type
Stainless Steel Bench Legs
Width
1500mm
Depth
600mm
Height
900mm
Construction
Stainless Steel
Brace Type
Double Centre Brace
Product Dimensions
1500(W) x 600(D) x 900(H)mm
Packed Dimensions
1570(W) x 670(D) x 200(H)mm
Warranty
1 Year Parts Only
Venue suitability: Suitable for commercial kitchens, food preparation areas, bakeries, catering operations, and institutional kitchens requiring a stable modular bench system. These legs are designed to pair with Modular Systems bench tops, sink tops, and equipment tables in the same depth range.Explore the full Modular Systems range for compatible bench tops, sink tops, and shelving. For commercial sink tops that fit this leg assembly, see our Commercial Stainless Steel Sinks collection.Installation & delivery: These bench legs assemble without specialist tools. Ensure the selected bench top or sink top matches the 600mm depth and 1500mm width of this leg set. Dispatched Australia-wide.Frequently asked questionsWhat bench tops are compatible with the 1500-6-WB-S?Any Modular Systems bench top, sink top, or equipment table in the 1500mm wide x 600mm deep format. Check the Modular Systems range for matching tops.What is the working height of this leg assembly?900mm, which is the standard standing preparation height for commercial kitchens.What material are the legs made from?Stainless steel construction suited to commercial kitchen hygiene requirements.What does 'double centre brace' mean?The frame includes two central cross-braces along the length of the unit, increasing lateral rigidity and load capacity compared to single-brace designs.What is the warranty on the 1500-6-WB-S?1 Year Parts Only warranty, supplied by Modular Systems via F.E.D.
The Modular Systems SSB6-1400R is a 1400mm single sink bench with splashback engineered for professional kitchen and food-service environments that demand reliable hygiene and long-term structural integrity.
Why operators choose the SSB6-1400R
304-grade stainless steel benchtop, 1.2mm thick — SUS304 (18/8) construction with ripple surface finish resists corrosion and heavy daily use.
150mm splashback with bevelled edges — protects walls and wet areas; fully enclosed 40mm-thick profile.
Right-hand drainer configuration — positions the prep zone to the left of the bowl for efficient flow in AU commercial kitchens.
Adjustable stainless steel disc feet — 42mm Ø legs with polished disc feet level the bench on uneven floors.
Flat-packed with tools and manual — quick on-site assembly; lockable castor kits available separately.
Specifications
Brand
Modular Systems
Model / MPN
SSB6-1400R
Type
Single Sink Bench
Overall Width
1400 mm
Overall Depth
600 mm
Overall Height
850 mm (working height 900 mm)
Bowl Size
410 W × 310 D × 200 H mm
Drain Hole
90 mm Ø
Drainer Side
Right
Splashback Height
150 mm
Splashback Thickness
40 mm (bevelled, fully enclosed)
Benchtop Material
1.2 mm SUS304 (18/8) stainless steel, ripple finish
Wet Edge
15 mm
Legs
42 mm Ø, 1.2 mm stainless steel with adjustable polished disc feet
Reinforcement
Stainless steel U-channel supports + 15 mm XPS board lining
Product Dimensions
1400 W × 600 D × 850 H mm
Packed Dimensions
1470 W × 670 D × 530 H mm
Net Weight
27 kg
Country of Manufacture
China
Warranty
24 months — 2 years parts only
Assembly
Flat-packed; tools and manual included
Venue suitability: Suited to commercial restaurant kitchens, catering facilities, café prep areas, school canteens, aged-care kitchens, and food-manufacturing wash stations requiring an NSF-style stainless prep surface with integrated sink and splashback.
This bench fits neatly into a commercial stainless steel sinks fitout, and pairs naturally with other Modular Systems stainless equipment for a cohesive kitchen build.
Installation & delivery: Arrives flat-packed for fast on-site assembly using the included tools and manual. Lockable castor kits are available as an optional add-on. Dispatched Australia-wide.
Frequently asked questions
What does the 'R' suffix mean on SSB6-1400R?The R indicates the drainer is positioned on the right-hand side of the bowl, making the prep zone run left-to-right — the most common layout for AU commercial kitchens.
What grade and thickness is the stainless steel?The benchtop is 1.2 mm SUS304 (18/8 grade) stainless steel with a ripple surface finish and 15 mm XPS board lining beneath for rigidity.
What are the bowl dimensions?The welded bowl measures 410 mm wide × 310 mm deep × 200 mm high with a 90 mm diameter drain hole, polished inside and out.
Can I add wheels to move the bench?Yes — lockable castor kits are available as an optional accessory. The standard configuration ships with adjustable stainless steel disc feet.
How does the bench arrive and how long does assembly take?The SSB6-1400R ships flat-packed with all required tools and an instruction manual. Most operators complete assembly in under 30 minutes without specialist trades.
Multipurpose Utility Bench with Sink - SS6-2100R-H
610mm deep
3 drawers
Bowl size: 300(W) x 300(D) x 300(H) mm
Cabinet comes fully assembled
304 grade Stainless Steel
Hygienic and easy to clean
2 Years Parts only Warranty
