Self Contained Ice Makers

The Blizzard SN-120P is a compact self-contained, air-cooled under bench cube ice maker that produces up to 55 kg of ice per 24 hours, with an 18 kg storage bin. WaterMark-certified and finished in stainless steel, its slim 500 mm-wide cabinet suits small cafes, bars and offices where bench space is tight. Why operators choose the SN-120P Up to 55 kg cube ice per 24h - right-sized output for cafes, small bars and offices 18 kg storage bin - a handy buffer of ready ice for service Slim 500 mm cabinet - fits tight under bench spaces 22 mm cube ice - clear, slow-melting cubes for drinks WaterMark certified - meets Australian plumbing certification requirements Air-cooled, stainless steel - no cooling-water circuit and an easy-clean finish Specifications Brand Blizzard Model / MPN SN-120P Type Self Contained Ice Maker Ice type Cube (22 mm) Ice output Up to 55 kg / 24h Ice storage 18 kg Cooling Air-cooled Body material Stainless steel Country of manufacture China Certification WaterMark certified Power 240 V; 480 W; 10 A Power type Electric (single phase) Product dimensions 500(W) x 590(D) x 850(H) mm Packed dimensions 670(W) x 580(D) x 835(H) mm Net weight 45 kg Packed weight 60 kg Warranty 2 Years Parts and Labour Venue suitability: At 55 kg a day from a 500 mm-wide cabinet, the SN-120P suits small cafes, offices, bars and staff kitchens with modest ice needs and limited bench space. It is a right-sized entry unit rather than a high-volume machine, so busier venues should step up to a larger model. See the rest of our self-contained ice makers or the full Blizzard ice range to match output and footprint to your site. Installation & delivery: Ships with a 240 V 10 A plug and lead and requires a cold water supply and drain, plus clearance for the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-120P make and hold? Up to 55 kg of cube ice per 24 hours, with an 18 kg onboard storage bin. How wide is the cabinet? Just 500 mm wide, so it fits tight under bench spaces. What size ice does it produce? Clear 22 mm cube ice. What power and connections does it need? A 240 V 10 A supply (plug and lead included) drawing 480 W, plus a cold water supply and a drain. Is it certified for Australia? Yes, the SN-120P is WaterMark certified. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-25C is a compact underbench bullet ice maker that produces up to 25kg of hard, clear bullet ice every 24 hours from a slim 375mm-wide cabinet. Its spray-type evaporator builds dense, slow-melting ice, making it ideal for small bars, cafes and offices where bench and floor space is tight.Why operators choose the SN-25C Up to 25kg/24h bullet ice - right-sized output for cafes, small bars and staff rooms Slim 375mm width - fits underbench in tight service areas Spray-type evaporator - produces clear, high-hardness bullet ice (28mm dia. x 40mm) Approx. 15kg internal bin - on-board storage for immediate use Stainless steel exterior - durable and easy to clean in commercial settings WaterMark certified - suitable for plumbed installation to Australian standards Specifications Brand Blizzard Model / MPN SN-25C Type Underbench self-contained ice maker Ice type Bullet (28mm dia. x 40mm) Ice output Up to 25kg / 24h Bin storage Approx. 15kg Condenser Air-cooled Refrigerant R290 (90g) Power 240V / 50Hz; 300W; 10A External material Stainless steel Product dimensions 375(W) x 575(D) x 762(H)mm Packed dimensions 665(W) x 470(D) x 740(H)mm Net weight 39kg Country of manufacture China Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: A strong fit for space-limited venues with modest ice needs - espresso bars, small cafes, offices, medical rooms and bar service stations - where the slim 375mm underbench footprint matters more than volume. For high-turnover bars or restaurants, step up to a higher-output model.Compare more self-contained ice makers or browse the wider Blizzard range to size up if you need more output.Installation & delivery: Connects to a standard 240V/10A single-phase outlet with a plumbed water supply; the unit is WaterMark certified for Australian installation. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-25C make per day? It produces up to 25kg of bullet ice every 24 hours, with an internal bin holding approximately 15kg.Will the SN-25C fit underbench? Yes. It measures 375(W) x 575(D) x 762(H)mm, so it slots into most standard underbench cavities in bars and cafes.What kind of ice does it make? It makes hard, clear bullet ice roughly 28mm in diameter x 40mm, which melts slowly and is ideal for drinks service.Is the SN-25C suitable for Australian plumbing? Yes. It is WaterMark certified for connection to a plumbed water supply to Australian standards.Does it need ongoing maintenance? Yes. Replace the water filter cartridge every 6 months and descale regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-280C is a professional self-contained crescent ice maker that produces up to 280kg of ice every 24 hours and stores approximately 125kg in its built-in bin. With crescent-cut ice (13 x 30 x 35mm), R404A refrigerant and an air/water condenser option, it is built for high-turnover venues that need a large, dependable ice supply.Why operators choose the SN-280C Up to 280kg/24h output - heavy-duty capacity for busy restaurants, bars and function venues Approx. 125kg bin storage - large on-board reserve to ride out service peaks Crescent ice (13 x 30 x 35mm) - slow-melting, drink-friendly ice that packs efficiently Air or water condenser - flexible siting to suit ventilation or ambient conditions R404A refrigeration - reliable cooling performance under commercial load Stainless steel exterior - durable, hygienic and easy to clean Specifications Brand Blizzard Model / MPN SN-280C Type Self-contained crescent ice maker Ice type Crescent (13 x 30 x 35mm) Ice output Up to 280kg / 24h Bin storage Approx. 125kg Condenser Air / water Refrigerant R404A Power 240V; 1800W; 10A External material Stainless steel Product dimensions 760(W) x 860(D) x 1810(H)mm Packed dimensions 650(W) x 890(D) x 2100(H)mm Net weight 119kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Aimed at high-demand sites - busy restaurants, hotels, clubs, function centres and catering operations - where the 280kg daily output and 125kg bin keep pace with sustained service. The air/water condenser choice helps in warm plant rooms or poorly ventilated back-of-house. It is more machine than a low-volume cafe needs.Compare more self-contained ice makers or view the full Blizzard range to match capacity to your site.Installation & delivery: Runs on a 240V/10A single-phase outlet and connects to a plumbed water supply; if water-cooled, a drain and water feed are required. Allow clearance for the chosen condenser type. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-280C make per day? It produces up to 280kg of crescent ice every 24 hours, with a built-in bin storing approximately 125kg.What refrigerant does the SN-280C use? It uses R404A and can run with either an air or water condenser to suit your installation.What shape of ice does it make? It produces crescent-cut ice pieces of roughly 13 x 30 x 35mm, which are slow-melting and ideal for drinks service.What power and water does the SN-280C need? It connects to a 240V/10A single-phase outlet and a plumbed water supply; water-cooled installs also need a drain.Does the machine require regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to protect ice quality and the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Refrigeration Volume: 30LDimensions W x D x H (mm): 467 x 591 x 788Weight: 30kgPackaging W x D x H (mm): 570 x 640 x 850Packaging Weight: 35kg

Read more less

The AG Equipment ICE227 is a self-contained, free-standing cube ice machine that produces up to 225 kg of fresh ice every 24 hours and stores it in an integrated 200 kg insulated bin, keeping high-demand venues supplied through the busiest service periods.Why operators choose the ICE227 225 kg/24 hr cube ice — high-volume output for bars, function venues and busy kitchens. 200 kg integrated storage bin — large insulated reserve so ice is ready when demand spikes. 304 stainless steel body — durable, hygienic construction built for commercial use. R290 natural refrigerant — low-GWP refrigerant with efficient 18.1 kWh/24h energy consumption. Standard 10 amp plug — connects to a single-phase 220-240V/50Hz outlet, no special supply needed. Specifications Brand AG Equipment Model / MPN ICE227 Type Self-Contained Ice Machine (Cube Ice) Ice Production 225 kg / 24 hr Ice Type Cube Storage Bin Capacity 200 kg Cooling Air-cooled Construction 304 Stainless Steel Controls Analog Voltage 220-240V Frequency 50Hz Input Power 960W Plug 10 amp Refrigerant R290 / 225 g Energy Consumption 18.1 kWh/24h Ambient Temperature 38°C Product Dimensions 760(W) x 860(D) x 1745(H)mm Package Dimensions 810(W) x 920(D) x 1800(H)mm Net Weight 165 kg Warranty 12 Month Parts & Labour Venue suitability: Built for high-throughput sites — busy bars, pubs, clubs, function centres, hotels and large cafes that need a dependable, self-contained ice supply with a generous on-board reserve. As one of our Self Contained Ice Makers, it ships as a complete free-standing package, and you can compare it against the rest of the AG Equipment range to match output to your site's demand.Installation & delivery: Requires a plumbed water supply and a 10 amp power point; allow at least 15 cm clearance around the unit for ventilation. A water filtration system is strongly recommended to protect ice quality and the evaporator. Dispatched Australia-wide.Frequently asked questionsHow much ice does the ICE227 make? It produces up to 225 kg of cube ice per 24 hours.How much ice can it store? The integrated insulated bin holds up to 200 kg of ice.Is it air-cooled or water-cooled? The ICE227 is air-cooled and needs at least 15 cm of clearance around it for airflow.What power supply does it need? A standard single-phase 220-240V/50Hz outlet via a 10 amp plug; input power is 960W.What warranty does it come with? It is covered by a 12 month parts & labour warranty (subject to correct installation and maintenance).

Read more less

The AG Equipment ICE159 is a free-standing modular cube-ice maker that produces up to 160kg of ice per 24 hours and stores up to 140kg in its insulated bin, built for high-demand hospitality service.Why operators choose the ICE159 160kg/24hr output — keeps busy bars, large restaurants, hotels and event venues stocked through peak service. 140kg insulated bin — a large built-in buffer so ice is ready when you need it without constant refilling. Commercial stainless body — withstands heavy daily use and wipes down quickly for hygiene. R290 air-cooled refrigeration — energy-efficient hydrocarbon system drawing just 13.6 kWh per 24 hours. Standard power and plug — runs on 220-240V/50Hz with an Australian 10-amp plug, no special supply required. Specifications Brand AG Equipment Model / MPN ICE159 Type Modular Cube Ice Maker (self-contained) Ice production 160 kg / 24 hr Ice type Cube Bin / storage capacity 140 kg Cooling Air-cooled Refrigerant R290 / 160g Energy consumption 13.6 kWh / 24 hr Voltage / frequency 220-240V / 50Hz Input power 860 W Plug Australian 10-amp Product dimensions 560 x 800 x 1720mm (W x D x H) Package dimensions 640 x 910 x 1810mm (W x D x H) Net weight 93 kg Shipping weight 106 kg Material Stainless steel body, plastic door Certifications CE / ISO 9001 Warranty 12 months parts & labour Venue suitability: The ICE159's 160kg/24hr output and 140kg bin make it a fit for busy bars, large restaurants, hotels, function centres and event venues where ice demand is constant. It sits in our range of Self Contained Ice Makers, and you can browse the full AG Equipment line-up for matching kitchen and bar equipment.Installation & delivery: Requires a cold-water supply and drainage; we recommend a plumbed water filtration system and at least 15cm clearance around the unit for ventilation. Have a licensed plumber connect it per the water-pressure rating on the unit. Dispatched Australia-wide.Frequently asked questionsHow much ice does the AG Equipment ICE159 make? It produces up to 160kg of cube ice per 24 hours.How much ice can it store? The insulated bin holds up to 140kg of ice.Is the ICE159 air-cooled or water-cooled? It is air-cooled, with ventilation grills around the unit and a condenser that needs at least 15cm of surrounding clearance.What refrigerant and power does it use? It uses R290 (160g charge) refrigerant, runs on 220-240V/50Hz with an 860W input, and consumes about 13.6 kWh per 24 hours.What warranty does it come with? It is covered by a 12-month parts and labour warranty; the unit must be maintained (filter and de-scaling) to keep the warranty valid.

Read more less

The Blizzard SN-80P is a self-contained under bench cube ice maker that produces up to 36kg of ice per 24 hours and stores around 15kg in its insulated bin, giving compact venues a steady, self-managed ice supply from a single 500mm-wide cabinet. Why operators choose the SN-80P Up to 36kg/24h output — enough cube ice for cafes, small bars and offices without a remote ice plant. ~15kg integrated storage — built-in bin (bin control setting approx. 8.5kg) holds a working buffer between cycles. Air-cooled condenser — simple install with no separate water-cooling loop required. Stainless steel exterior — wipe-clean, corrosion-resistant body built for commercial use. Under bench footprint — 500(W) x 450(D) x 800(H)mm fits neatly beneath a standard bench. Specifications Brand Blizzard Model / MPN SN-80P Type Self Contained Ice Maker Ice production Up to 36kg / 24h Ice storage capacity Approx. 15kg (bin control approx. 8.5kg) Ice shape Cube (22mm) Condenser / cooling Air cooled Construction Stainless steel Doors 1 (hinged) Power 240V; 370W; 10amp plug and lead included Product dimensions 500(W) x 450(D) x 800(H)mm Packed dimensions 580(W) x 530(D) x 835(H)mm Net weight 36kg Warranty 2 Years Parts & Labour Venue suitability: A practical fit for cafes, small bars, offices, medical and hospitality sites that need reliable cube ice on demand but lack the space for a full-size modular ice machine. Browse the full range of Self Contained Ice Makers or see more from Blizzard for matching options. Installation & delivery: Connects to a standard mains water supply and a 10amp power point with the supplied plug and lead; air-cooled operation means no water-cooling loop to plumb. Allow clearance around the louvred panels for airflow. Dispatched Australia-wide. Frequently asked questions How much ice does the Blizzard SN-80P make per day? It produces up to 36kg of cube ice over 24 hours under standard conditions. How much ice can it store? The integrated bin holds approximately 15kg, with a bin control setting of approximately 8.5kg. What shape and size is the ice? It makes solid cube ice at around 22mm. Is the SN-80P air or water cooled? It is air cooled, so it does not require a separate water-cooling connection. What warranty does it come with? The SN-80P is backed by a 2 Years Parts & Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-500P is a large air-cooled self-contained ice maker that produces up to 225kg of ice every 24 hours and stores approximately 170kg in its built-in bin. Built with an Italian Aspera compressor and a U.S. Morrill water pump, and WaterMark certified for Australian installation, it is designed for high-demand venues needing a big on-board ice reserve.Why operators choose the SN-500P Up to 225kg/24h output - substantial daily capacity for busy hospitality and catering sites Approx. 170kg built-in storage - large reserve so ice is on hand through peak periods Air-cooled operation - no water-cooling plumbing needed, just airflow clearance Italian Aspera compressor - dependable refrigeration under sustained commercial load ~22mm cube ice - clear, slow-melting cubes suited to drinks and food service WaterMark certified - approved for plumbed installation to Australian standards Specifications Brand Blizzard Model / MPN SN-500P Type Self-contained air-cooled ice maker Ice type Cube (approx. 22mm) Ice output Up to 225kg / 24h Storage capacity Approx. 170kg Condenser Air-cooled Compressor Italian Aspera Power 240V; 1360W; 10A (plug and lead included) External material Stainless Steel Product dimensions 760(W) x 860(D) x 1745(H)mm Packed dimensions 880(W) x 910(D) x 1780(H)mm Net weight 110kg Country of manufacture China Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: Built for high-turnover operations - restaurants, hotels, clubs, function venues and catering kitchens - where the 225kg daily output and roughly 170kg on-board storage keep service supplied. As an air-cooled unit it needs good ventilation and airflow clearance; it is larger than a small cafe requires.Compare more self-contained ice makers or view the full Blizzard range to match output to your venue.Installation & delivery: Supplied with a 10A plug and lead for a standard 240V single-phase outlet and connects to a plumbed water supply; being air-cooled it needs airflow clearance and good ventilation. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-500P make per day? It produces up to 225kg of cube ice every 24 hours, with a built-in bin storing approximately 170kg.Is the SN-500P air-cooled or water-cooled? It is air-cooled, so it needs airflow clearance and good ventilation but no additional water-cooling plumbing.Is the SN-500P suitable for Australian plumbing? Yes. It is WaterMark certified for connection to a plumbed water supply to Australian standards.What power supply does the SN-500P need? It comes with a 10A plug and lead for a standard 240V single-phase outlet and draws around 1360W.Does the machine need regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard FWIC-54C is a self-contained ice maker, 54 kg of ice per 24 hours, 30 kg storage, in a 675 × 600 × 750 mm footprint. It runs on 240V, 588 W from a 10 A supply. Why operators choose the FWIC-54C Crescent-shaped ice — Slower melting with clear drink presentation. Colder drinks, less dilution — Keeps drinks cooler for longer. Fully automatic operation — Fast ice making with auto stop and low water alarm. Upward sliding door — Needs less front clearance than a swing door. Eco-friendly refrigerant — R290 natural refrigerant. Specifications Brand Blizzard Model / MPN FWIC-54C Type Self Contained Ice Maker Capacity 54 kg of ice per 24 hours, 30 kg storage Ice Type Crescent Body Stainless Steel Power 240V, 588W/10 A Product Dimensions 675(W) × 600(D) × 750(H) mm Packed Dimensions 860(W) × 840(D) × 1000(H) mm Warranty 2 Years Parts and Labour Venue suitability: The FWIC-54C suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range. Installation & delivery: The FWIC-54C runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information. Frequently asked questions What is the capacity of the FWIC-54C?The FWIC-54C makes up to 54 kg of ice per 24 hours and holds 30 kg in storage. What power supply does the FWIC-54C need?The FWIC-54C runs on single-phase 240V, 588 W from a 10 A supply. Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers. How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 675 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues. What warranty does the FWIC-54C carry?The FWIC-54C is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SIC-63R is a self-contained ice maker, 63 kg of ice per 24 hours, 25 kg storage, in a 675 × 600 × 795 mm footprint. It runs on 240V, 810 W from a 10 A supply. Why operators choose the SIC-63R Octagonal cylinder ice — 30 × 30 × 25 mm crystal-clear octagonal ice. Premium presentation — Faceted design enhances crystal clarity and drink presentation. Colder drinks, less dilution — Helps keep whisky, cocktails and premium spirits colder for longer. Fully automatic operation — With low water alarm. Eco-friendly refrigerant — R290 natural refrigerant. Specifications Brand Blizzard Model / MPN SIC-63R Type Self Contained Ice Maker Capacity 63 kg of ice per 24 hours, 25 kg storage Ice Type Octagonal cylinder, 30 × 30 × 25 mm Body Stainless Steel Power 240V, 810W/10A Product Dimensions 675(W) × 600(D) × 795(H) mm Packed Dimensions 860(W) × 840(D) × 950(H) mm Warranty 2 Years Parts and Labour Venue suitability: The SIC-63R suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range. Installation & delivery: The SIC-63R runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information. Frequently asked questions What is the capacity of the SIC-63R?The SIC-63R makes up to 63 kg of ice per 24 hours and holds 25 kg in storage. What power supply does the SIC-63R need?The SIC-63R runs on single-phase 240V, 810 W from a 10 A supply. Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers. How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 675 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues. What warranty does the SIC-63R carry?The SIC-63R is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SIC-40L is a self-contained ice maker, 40 kg of ice per 24 hours, 20 kg storage, in a 506 × 600 × 850 mm footprint. It runs on 240V, 820 W from a 10 A supply. Why operators choose the SIC-40L Crystal-clear square ice — Large 50 × 50 × 50 mm cubes. Slow-melting cubes — Keep drinks colder for longer with less dilution. Hygienic ice production — Built-in sterilisation module. Fully automatic operation — Fast ice making with auto stop and low water alarm. Splash-resistant — IPX3 rated for splash resistance. Eco-friendly refrigerant — R290 natural refrigerant. Specifications Brand Blizzard Model / MPN SIC-40L Type Self Contained Ice Maker Capacity 40 kg of ice per 24 hours, 20 kg storage Ice Type Crystal square cubes, 50 × 50 × 50 mm Body Stainless Steel Power 240V, 820W/10A Product Dimensions 506(W) × 600(D) × 850(H) mm Packed Dimensions 655(W) × 705(D) × 1065(H) mm Warranty 2 Years Parts and Labour Venue suitability: The SIC-40L suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range. Installation & delivery: The SIC-40L runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information. Frequently asked questions What is the capacity of the SIC-40L?The SIC-40L makes up to 40 kg of ice per 24 hours and holds 20 kg in storage. What power supply does the SIC-40L need?The SIC-40L runs on single-phase 240V, 820 W from a 10 A supply. Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers. How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 506 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues. What warranty does the SIC-40L carry?The SIC-40L is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Polar UA039-A is a self-contained ice machine that produces and stores ice in one benchtop unit with no separate bin, built for bars and similar professional venues. It carries 4kg capacity, a 380 × 590 × 477 mm footprint, stainless steel construction. GEMS Registration Number: 176214. Why operators choose it GEMS Registration Number — 176214 Two UVC sterilising functions reduce bacteria growth Solid door keeps ice uncontaminated & blocks UVC light exposure 4kg storage ensures a ready supply Intuitive digital display and controls with indicator lights Self clean function Includes installation kit & food-safe ice scoop Countertop design uses gravity drainage system Specifications Brand Polar Model / MPN UA039-A SKU UA039-A Type Self-Contained Ice Machine Capacity 4kg Dimensions (W×H×D) 380 × 590 × 477 mm Voltage 220-240V Power ful compressor cooling with fuss-free automatic defrosting Output 20kg/day Refrigerant R600a / GWP 3 Material Stainless Steel Warranty 1 Year Parts & Labour Net weight 25.4kg Shipping weight 110 kg Which venues it suits With 4kg on hand, it fits bars, cafés and restaurants needing on-demand ice without a modular head and bin. Storage is limited by design — high-volume venues need a modular machine over a dedicated bin. Compare the rest of our self contained ice makers for other sizes and configurations, or browse the full Polar range. Installation & delivery It runs on a 220-240V supply, so it plugs into a standard outlet with no licensed electrical work required. Leave clearance around the condenser for airflow. We dispatch from our Sydney warehouse and partner sites Australia-wide. Shipping weight is 110 kg. Warranty is 1 year — see our warranty and service requests page. Frequently asked questions What capacity is the Polar UA039-A? It offers 4kg of usable capacity. What are the dimensions of the UA039-A? 380 mm wide × 590 mm high × 477 mm deep. Measure your opening against the width and depth before ordering. What power supply does it need? 220-240V. It runs from a standard outlet — no licensed electrical work is required. Which refrigerant does it use? R600a / GWP 3 — a low global-warming-potential hydrocarbon refrigerant. What is it made from? Stainless Steel. What warranty comes with the UA039-A? 12 months. Full terms and how to lodge a claim are on our warranty and service requests page. Is documentation available? Yes — 2 supplier documents are attached to this page for download, covering setup, operation and parts. Does it lock? Solid door keeps ice uncontaminated & blocks UVC light exposure.

Read more less

Dimensions W: 600mm D: 610mm H: 770mmPacked Weight: 65kg Product Features 80kg daily production rate 20kg storage bin capacity W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 950mm D: 605mm H: 1083mmPacked Weight: 88kg Product Features 150kg daily production rate 60kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 600mm D: 610mm H: 770mmPacked Weight: 65kg Product Features 75kg daily production rate 20kg storage bin capacity W 22mm x D 22mm x H 22mm, 10g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 950mm D: 605mm H: 872mmPacked Weight: 79kg Product Features 135kg daily production rate 44kg storage bin capacity W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX model uses hydrocarbon R290 refrigerant gas XSafe - Natural Sanitation System Ice evaporator stainless steel auger Simple, reliable electromechanic controls Built-in storage bin Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 535mm D: 619mm H: 891mmPacked Weight: 58kg Product Features 70kg daily production rate 25kg storage bin capacity W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX model uses hydrocarbon R290 refrigerant gas XSafe - Natural Sanitation System Ice evaporator stainless steel auger Simple, reliable electromechanic controls Built-in storage bin Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 670mm D: 595mm H: 983mmPacked Weight: 76kg Product Features 68kg daily production rate 33kg storage bin capacity 30mm dia x H 30mm, 25g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional adjustable feet available All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 650mm D: 690mm H: 1003mmPacked Weight: 77kg Product Features 129kg daily production rate 37kg storage bin capacity W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose Optional extras: SC8700000200 - Optional leg kit (NU 100/ NU 150/ NU 220 models) All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 485mm D: 575mm H: 908mmPacked Weight: 59kg Product Features 47kg daily production rate 18kg storage bin capacity 30mm dia x H 30mm, 25g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional adjustable feet available All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 1078mm D: 719mm H: 1082mmPacked Weight: 112kg Product Features 160kg daily production rate 70kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 650mm D: 690mm H: 1003mmPacked Weight: 77kg Product Features 125kg daily production rate 37kg storage bin capacity W 22mm x D 22mm x H 22mm, 10g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose Optional extras: SC8700000200 - Optional leg kit (NU 100/ NU 150/ NU 220 models) All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 1250mm D: 622mm H: 809mmPacked Weight: 97kg Product Features 150kg daily production rate 50kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 600mm D: 610mm H: 770mmPacked Weight: 65kg Product Features 78kg daily production rate 20kg storage bin capacity W 28mm x D 22mm x H 28mm, 15g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less