Self Contained Ice Makers

The Blizzard SN-1000P is a large self-contained, air-cooled ice maker that produces up to 450 kg of cube ice per 24 hours with around 170 kg of onboard bin storage. Floor-standing and built from stainless steel, it is WaterMark-certified and suited to high-demand hospitality, function and production sites. Why operators choose the SN-1000P Up to 450 kg cube ice per 24h - high-volume output for hotels, function centres and busy bars ~170 kg bin storage - a large buffer to cover peak service without running dry 22 mm cube ice - clear, slow-melting cubes ideal for spirits and mixed drinks Air-cooled condenser - no cooling-water circuit required Stainless steel construction - a hard-wearing commercial build WaterMark certified - meets Australian plumbing certification requirements Premium components - Italian Aspera compressor, German EBM-Papst fan, Danfoss valve and U.S. Morrill pump Specifications Brand Blizzard Model / MPN SN-1000P Type Self Contained Ice Maker Ice type Cube (22 mm) Ice output Up to 450 kg / 24h Ice storage ~170 kg Cooling Air-cooled Body material Stainless steel Country of manufacture China Certification WaterMark certified Power 240 V; 2400 W (2.4 kW); 15 A Power type Electric (single phase) Product dimensions 760(W) x 860(D) x 1920(H) mm Packed dimensions 848(W) x 925(D) x 1915(H) mm Net weight 124 kg Packed weight 168 kg Warranty 2 Years Parts and Labour Venue suitability: With 450 kg daily output and ~170 kg storage, the SN-1000P is built for high-demand sites - hotels, clubs, function centres, large restaurants and beverage or seafood production - where a small underbench maker would fall short. Its air-cooled condenser needs clear airflow, so allow ventilation space around the cabinet in warmer plant rooms. Explore other self-contained ice makers or the full Blizzard ice range to match daily output to your service volume. Installation & delivery: Ships with a 240 V 15 A plug and lead and requires a cold water supply and drain, plus clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-1000P make and hold? Up to 450 kg of cube ice per 24 hours, with approximately 170 kg of onboard bin storage. What size ice does it produce? Clear 22 mm cube ice, well suited to spirits and mixed drinks. Is it air-cooled or water-cooled? It is air-cooled and needs clear airflow around the condenser; no cooling-water circuit is required. What power and connections does it need? A 240 V 15 A supply (plug and lead included) drawing 2400 W, plus a cold water supply and drain. Is it certified for Australia? Yes, the SN-1000P is WaterMark certified. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-101B is a self-contained, air-cooled under bench ice maker that produces up to 100 kg of cube ice per 24 hours, with about 30 kg of bin storage. It runs on natural R290 refrigerant, is finished in stainless steel and fits under a standard bench in cafes, bars and staff rooms. Why operators choose the SN-101B Up to 100 kg cube ice per 24h - reliable daily output for cafes, bars and small kitchens ~30 kg bin storage - holds a service buffer of ready ice R290 natural refrigerant - a low-GWP, more environmentally friendly cooling option 23 mm cube ice - clear cubes that melt slowly in drinks Air-cooled, stainless steel - no cooling-water circuit and a durable commercial finish Quality components - German EBM-Papst fan, Danfoss valve and U.S. Morrill water pump Specifications Brand Blizzard Model / MPN SN-101B Type Self Contained Ice Maker Ice type Cube (23 mm) Ice output Up to 100 kg / 24h Ice storage ~30 kg Refrigerant R290 Cooling Air-cooled Body material Stainless steel Country of manufacture China Power 240 V; 420 W; 10 A Power type Electric (single phase) Product dimensions 666(W) x 650(D) x 780(H) mm Packed dimensions 760(W) x 746(D) x 780(H) mm Net weight 67 kg Packed weight 78 kg Warranty 2 Years Parts and Labour Venue suitability: The 100 kg daily output and slim under bench build make the SN-101B a good match for cafes, bars, staff rooms and medical rooms that need steady ice without a floor-standing machine. Its R290 refrigerant suits operators prioritising lower-GWP equipment; for very high-volume sites a larger floor model is a better fit. Browse more self-contained ice makers or the full Blizzard ice range to size the right unit for your daily demand. Installation & delivery: Requires a 240 V 10 A outlet plus a cold water supply and drain, and clearance for the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-101B make and hold? Up to 100 kg of cube ice per 24 hours, with approximately 30 kg of bin storage. What refrigerant does it use? Natural R290 refrigerant, which has a low global-warming potential. What size ice does it produce? Clear 23 mm cube ice. What power and connections does it need? A 240 V 10 A outlet drawing 420 W, plus a cold water supply and a drain. Is it air-cooled? Yes; it is air-cooled and needs clear airflow around the condenser, so no cooling-water circuit is required. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-31A is a compact underbench self-contained ice maker that produces up to 31kg of cube ice every 24 hours from a small 460mm-wide cabinet. Air-cooled with a removable water filter, it delivers clear ~22mm cube ice for cafes, bars and small food outlets where space is limited.Why operators choose the SN-31A Up to 31kg/24h cube output - practical daily volume for cafes, bars and small kitchens Compact 460mm-wide cabinet - fits underbench in space-tight venues Clear ~22mm cube ice - versatile, slow-melting ice for drinks and food service Air-cooled operation - simple install with no water-cooling plumbing Removable water filter included - easier routine cleaning and maintenance Stainless steel exterior - hard-wearing and easy to wipe down Specifications Brand Blizzard Model / MPN SN-31A Type Underbench self-contained ice maker Ice type Cube (approx. 22mm) Ice output Up to 31kg / 24h Bin storage Approx. 10kg Condenser Air-cooled Power 220-240V; 310W; 10A Refrigerant R290 (90g) Certification WaterMark certified External material Stainless steel Product dimensions 460(W) x 430(D) x 800(H)mm Packed dimensions 505(W) x 545(D) x 775(H)mm Net weight 38kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Suited to low-to-moderate ice users with limited space - cafes, small bars, offices, medical rooms and takeaway outlets - where the 460mm underbench footprint and modest 31kg daily output are the right fit. For high-volume bars or restaurants, choose a larger-capacity model.Compare more self-contained ice makers or browse the wider Blizzard range if you need greater output.Installation & delivery: Connects to a standard 240V/10A single-phase outlet with a plumbed water supply; it is air-cooled, so allow airflow clearance around the cabinet. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-31A make per day? It produces up to 31kg of cube ice every 24 hours, with an internal bin holding approximately 10kg.Will the SN-31A fit underbench? Yes. At 460(W) x 430(D) x 800(H)mm it suits most standard underbench cavities in cafes and small bars.What size ice does it make? It produces clear cube ice of approximately 22mm, well suited to drinks and general food service.Is the SN-31A air-cooled? Yes. It is air-cooled, so it needs airflow clearance around the cabinet but no additional water-cooling plumbing.Does it need regular maintenance? Yes. Replace the removable water filter cartridge every 6 months and descale regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-81B is a self-contained, air-cooled under-bench ice maker that produces up to 80 kg of 22 mm cube ice per 24 hours and stores approximately 30 kg in its built-in bin, sized for cafes, bars and smaller venues. It draws just 4.98 A from a standard 240 V outlet and uses premium components including a US Morrill water pump and German EBM-Papst fans. Why operators choose the SN-81B Up to 80 kg ice per 24 h — a reliable daily supply for cafes, bars and takeaways Approx. 30 kg on-board bin storage — enough buffer to cover typical service peaks Under-bench footprint — slots neatly beneath a bench in tight back-of-house layouts 22 mm³ cube ice — slow-melting cubes for drinks and cold displays Low 4.98 A draw — runs on a standard outlet with modest power demand Premium components — Morrill pump, EBM-Papst fans and Danfoss valves for long service life Specifications Brand Blizzard Model / MPN SN-81B Type Self-Contained Ice Maker Ice production Up to 80 kg / 24h Bin storage Approx. 30 kg Ice type 22 mm³ cube Cooling Air-cooled Refrigerant R290 (120g) Certification WaterMark certified Power 240 V; 610 W; 4.98 A Product dimensions 660(W) x 650(D) x 780(H)mm Packed dimensions 738(W) x 746(D) x 826(H)mm Net weight 58 kg Exterior material Steel Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-81B suits cafes, small bars, takeaways and offices that need a compact under-bench ice supply rather than a floor-standing machine. Its air-cooled design needs only airflow clearance; for high, sustained demand choose a larger-output unit. Browse more Self Contained Ice Makers or view the full Blizzard range to match output to your venue. Installation & delivery: Requires a standard 240 V outlet (4.98 A draw) plus a mains water inlet and drain; allow clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions How much ice does the SN-81B make? It produces up to 80 kg of 22 mm cube ice per 24 hours, suited to cafes, small bars and takeaways. How much ice can it store? The built-in bin holds approximately 30 kg, providing a buffer through service peaks. Will it fit under a bench? Yes — at 660(W) x 650(D) x 780(H)mm it is designed as an under-bench unit for tight back-of-house layouts. What power does it need? A standard 240 V outlet; the unit draws just 4.98 A, along with a mains water inlet and drain. What warranty is included? The SN-81B is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Bromic's Modular 320kg Half-Dice Ice Machine is suited to high-volume applications where crystal-clear, general-purpose ice is required in bulk. Rapidly producing large slabs of slow-melting half-dice ice, this heavy-duty unit can comfortably keep up in peak-periods or produce a surplus to be sold on the side. Economical half-dice ice suits blending and general purpose use Hard, pure ice that's ready for consumption and cooling alike Suitable Storage Bins: SB178, SB243 and SB406 3 Year parts warranty 1 Year labour warranty *Production /power usage based on 10°C ambient temp. and 10°C Water temp. as tested by the Manufacturer. Economical half-dice ice suits blending and general purpose use Hard, pure ice thats ready for consumption and cooling alike Suitable Storage Bins: SB178, SB243 and SB406 3 Year parts warranty 1 Year labour warranty More Information SKU BR-3935187 Weight (kg) 73 Colour S/Steel Warranty (months) 12 Ice Type ½ Dice Ice Cube Size (mm) 29(H) x 23 (W) x 10(D) Max. Ambient Temp. (°C / RH) 40 Ice Production (kg/24hrs) 320 Refrigeration Power (W) 1600 Refrigerant R404a Water Consumption (L/h) 1.5 Storage Bin Compatibility SB406, SB178, SB243 Height (mm) 575 Depth (mm) 620 Width (mm) 760 All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-80C is a self-contained crescent ice maker that delivers up to 95 kg of ice per 24 hours with approximately 40 kg of bin storage, sized for cafes, bars and small-to-mid venues. It uses R404A refrigerant, an air/water-capable condenser and a sliding-door bin, running on a standard 240 V / 10 A supply. Why operators choose the SN-80C Up to 95 kg crescent ice per 24 h — steady supply for cafes, bars and service counters Approx. 40 kg bin behind a sliding door — easy scooping with minimal cold loss R404A refrigerant — efficient, reliable cooling for continuous operation 13 x 30 x 35 mm crescent cubes — clear, slow-melting ice for drinks and displays Air/water condenser capability — flexible installation to suit the site Compact freestanding footprint — fits tight back-bar and prep areas Specifications Brand Blizzard Model / MPN SN-80C Type Self-Contained Ice Maker Ice production Up to 95 kg / 24h Bin storage Approx. 40 kg Ice type 13 x 30 x 35 mm crescent Refrigerant R404A Cooling Air / water condenser Door Sliding door Power 240 V; 770 W; 10 A Product dimensions 650(W) x 651(D) x 1063(H)mm Packed dimensions 750(W) x 740(D) x 1030(H)mm Net weight 61 kg Exterior material Steel Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-80C fits cafes, espresso bars, small restaurants and boutique hotels that need a dependable crescent-ice supply without a full-size machine. Its compact freestanding body (1063mm tall) suits tight back-of-house spaces; for continuous heavy demand, step up to a higher-output model. See more Self Contained Ice Makers or explore the wider Blizzard range to find the right output for your venue. Installation & delivery: Runs on a standard 240 V / 10 A power point and needs a mains water inlet and drain; the condenser can be air or water configured. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions What type of ice does the SN-80C make? It produces 13 x 30 x 35 mm crescent cubes — clear and slow-melting, ideal for drinks service and cold displays. How much ice can it store? The sliding-door bin holds approximately 40 kg, giving a useful buffer for cafe and bar service. What refrigerant does it use? The SN-80C uses R404A refrigerant with an air/water-capable condenser. What power and plumbing does it need? A standard 240 V / 10 A supply plus a mains water inlet and drain connection. What warranty is included? The SN-80C is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-280C is a professional self-contained crescent ice maker that produces up to 280kg of ice every 24 hours and stores approximately 125kg in its built-in bin. With crescent-cut ice (13 x 30 x 35mm), R404A refrigerant and an air/water condenser option, it is built for high-turnover venues that need a large, dependable ice supply.Why operators choose the SN-280C Up to 280kg/24h output - heavy-duty capacity for busy restaurants, bars and function venues Approx. 125kg bin storage - large on-board reserve to ride out service peaks Crescent ice (13 x 30 x 35mm) - slow-melting, drink-friendly ice that packs efficiently Air or water condenser - flexible siting to suit ventilation or ambient conditions R404A refrigeration - reliable cooling performance under commercial load Stainless steel exterior - durable, hygienic and easy to clean Specifications Brand Blizzard Model / MPN SN-280C Type Self-contained crescent ice maker Ice type Crescent (13 x 30 x 35mm) Ice output Up to 280kg / 24h Bin storage Approx. 125kg Condenser Air / water Refrigerant R404A Power 240V; 1800W; 10A External material Stainless steel Product dimensions 760(W) x 860(D) x 1810(H)mm Packed dimensions 650(W) x 890(D) x 2100(H)mm Net weight 119kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Aimed at high-demand sites - busy restaurants, hotels, clubs, function centres and catering operations - where the 280kg daily output and 125kg bin keep pace with sustained service. The air/water condenser choice helps in warm plant rooms or poorly ventilated back-of-house. It is more machine than a low-volume cafe needs.Compare more self-contained ice makers or view the full Blizzard range to match capacity to your site.Installation & delivery: Runs on a 240V/10A single-phase outlet and connects to a plumbed water supply; if water-cooled, a drain and water feed are required. Allow clearance for the chosen condenser type. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-280C make per day? It produces up to 280kg of crescent ice every 24 hours, with a built-in bin storing approximately 125kg.What refrigerant does the SN-280C use? It uses R404A and can run with either an air or water condenser to suit your installation.What shape of ice does it make? It produces crescent-cut ice pieces of roughly 13 x 30 x 35mm, which are slow-melting and ideal for drinks service.What power and water does the SN-280C need? It connects to a 240V/10A single-phase outlet and a plumbed water supply; water-cooled installs also need a drain.Does the machine require regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to protect ice quality and the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 45kg/24 hours of the harder, longer-lasting SPIKA Half Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Half Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 20kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 535 W x 595 D x 789 H (894 - 944 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 535 W x 595 D x 789 (with legs 894-944) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 45 Ice Storage (kg): 20 Ice Cube Dimensions: 23 x 11 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.36 Weight (kg): 53 kW: 0.42 Current Draw (Amps): 1.41 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 535(W) x 789(H) x 595(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Create 76kg/24 hours of the sought-after SPIKA Half Dice, the preferred slow-melt drinks cube for bars around the world. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Half Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 20kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 535 W x 595 D x 789 H (894 - 944 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 535 W x 595 D x 789 (with legs 894 - 944) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 76 Ice Storage (kg): 20 Ice Cube Dimensions: 23 x 11 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.36 Weight (kg): 53 kW: 0.63 Current Draw (Amps): 2.29 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 535(W) x 789(H) x 595(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 145kg/24 hours of the harder, longer-lasting SPIKA Half Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Half Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 45kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 762 W x 762 D x 832 H (937 - 987 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 762 W x 762 D x 832 (with legs 937 - 987) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 145 Ice Storage (kg): 45 Ice Cube Dimensions: 23 x 11 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.66 Weight (kg): 81 kW: 0.93 Current Draw (Amps): 3 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 762(W) x 832(H) x 762(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Create 76kg/24 hours of the sought-after SPIKA Full Dice, the preferred slow-melt drinks cube for bars around the world. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Full Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 20kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 535 W x 595 D x 789 H (894 - 944 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 535 W x 595 D x 789 (with legs 894 x 944) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 76 Ice Storage (kg): 20 Ice Cube Dimensions: 26 x 23 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.36 Weight (kg): 53 kW: 0.63 Current Draw (Amps): 2.29 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 535(W) x 789(H) x 595(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 99kg/24 hours of the harder, longer-lasting SPIKA Full Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Full Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 35kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 660 W x 700 D x 832 H (937 - 987 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 660 W x 700 D x 832 (with legs 937 - 987) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 99 Ice Storage (kg): 35 Ice Cube Dimensions: 26 x 23 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.51 Weight (kg): 70 kW: 0.71 Current Draw (Amps): 2.41 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 660(W) x 832(H) x 700(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 45kg/24 hours of the harder, longer-lasting SPIKA Full Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Full Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 20kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 535 W x 595 D x 789 H (894 - 944 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 535 W x 595 D x 789 (with legs 894-944) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 45 Ice Storage (kg): 20 Ice Cube Dimensions: 26 x 23 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.36 Weight (kg): 53 kW: 0.42 Current Draw (Amps): 1.41 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 535(W) x 789(H) x 595(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 99kg/24 hours of the harder, longer-lasting SPIKA Half Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Half Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 35kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 660 W x 700 D x 832 H (937 - 987 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 660 W x 700 D x 832 (with legs 937 - 987) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 99 Ice Storage (kg): 35 Ice Cube Dimensions: 23 x 11 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.51 Weight (kg): 70 kW: 0.71 Current Draw (Amps): 2.41 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 660(W) x 832(H) x 700(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce 145kg/24 hours of the harder, longer-lasting SPIKA Full Dice ice cube that is used around the world by large drinks venues. Now uses R290 Hydrocarbon natural refrigerant for even more power efficiency and virtually zero impact on the environment. Partner with a SILO ice storage bin for ultimate convenience and capacity. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: SPIKA Full Dice - designed for scaled-up beverage service Suitable for very hot climates (ambient temperatures up to 43°C) Has 45kg of convenient built in ice storage capacity Designed for commercial bar, restaurant, pub and night club spaces - 762 W x 762 D x 832 H (937 - 987 with legs) (mm) Easily build into joinery with front and rear-facing ventilation (100mm clearance required) Easy access panels for service and installation Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Hospitality / Venues, Accommodation, Schools, Medical / Aged Care, Bakery / Pastry Dimensions: 762 W x 762 D x 832 (with legs 937 - 987) H (mm) Refrigeration Unit: Self Contained Ice Production (kg/24h): 145 Ice Storage (kg): 45 Ice Cube Dimensions: 26 x 23 x 26 Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.66 Weight (kg): 81 kW: 0.93 Current Draw (Amps): 3 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase Product Dimensions: 762(W) x 832(H) x 762(D)mmOptions Available: 10mm screwfix levelling feet ITV-33007 Castors ITV-31703 Drain pump SXX11725-P Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Polar G-Series Countertop Ice Maker 50kg Output — Polar Ice Machine Cube Maker The Polar G-Series countertop ice maker 20kg output is a compact, stainless steel polar ice machine designed for commercial and domestic kitchens, bars and mobile catering. This self-contained g-series countertop ice machine delivers reliable 20kg output of bullet-shaped cube ice and cube ice maker performance so you always have access to ice cubes whenever you need them. Designed for easy installation with a mains water connection, the mains-filled unit with improved output ensures consistent supply and high-quality ice. The g-series countertop ice maker 20kg is suitable for use in a commercial kitchen, bar or counter, providing quick access and reducing the need for transporting ice across the kitchen thanks to its compact countertop design. Capacity & output: 20kg daily ice production, compact storage for ready access to ice cubes whenever you need. Hygiene & maintenance: stainless steel construction, model drains via gravity, and options to recommend a water filter — a water filter is fitted to maintain ice quality and protect refrigeration components. Design & placement: self-contained, compact countertop design means you can position the unit where it’s needed; providing quick access and reducing the need for transporting ice across the kitchen. Performance & reliability: commercial-grade polar refrigeration and reliable output make it ideal for cocktail service, food displays and large-volume commercial ice requirements. Versatility: perfect for anything from cocktails to food displays, mobile catering or a busy bar — the g-series meets commercial standards while remaining affordable. Choose g-series ice machines when you need a reliable mains-filled unit with improved output and easy-to-use controls. The Polar G-Series countertop ice maker combines design, performance and hygiene to ensure the highest quality ice supply and simple maintenance of your ice machine equipment.   Product Features Material: Stainless Steel — robust, corrosion-resistant for commercial use in Australia Dimensions: 831(H) x 498(W) x 604(D) mm Refrigerant: R290 Warranty: 1 Year Parts & Labour included in the listed price Weight: 45.5 kg Large 10 kg capacity bin dispenses ice ready for immediate use, delivering ice every shift without interruption User-friendly push-button controls — easy to use with minimal training required Solid door maintains temperature and keeps ice free from contaminants for hygienic storage Time-saving, easy-clean construction with automatic clean mode for effortless maintenance Simple manual defrost function to help keep the unit performing at its best Sturdy adjustable feet allow simple positioning and leveling Auto fill requires plumbing into a mains water connection for non-stop ice production — ideal for self contained setups or connected back-of-house installations Dispenses soft bullet-shaped ice suitable for drinks and cooling applications Internal drain pump included as standard — easy to install; external pump optional for specific installations Not suitable for outdoor or mobile environments, including catering vehicles Output: 50 kg/24 hr, and available in our ice machines archives for quick comparison if you need alternative capacities All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

HIGHEST QUALITY ICE This self-contained cube ice maker is part of a unique range of cubers; designed with hygiene as a priority. Each ice cycle is made with fresh water, ensuring only the highest quality of ice. The cubes are easily recognized by its precise shape, clarity and slow dilution. New intelligent control circuit dedicated to saving power and water consumption. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil. Large Ice Cube Makers are specifically designed for bars, to be used in cocktails and not for general ice and especially blending purposes. Large Ice Cubes (above 22mm) cannot be blended for juices, smoothies etc Production Capacity per 24hours Approx.45kg @10°C Air temp; 10°C WaterApprox. 44kg @21°C Air temp; 15°C WaterApprox. 37kg @32°C Air temp; 21°C Water Max Storage Capacity Approx. 26kg ( Bin Control Settings Approx.18 Kg) Freeze Cycle Time Approx. 22 Min Ice Production Per cycle Approx. 0.72kg/56pcs Dimensions 633mm (W) x 506mm (D) x 930mm (H)(Units include adjustable legs 90-125mm) Cooling Air Weight Net/Gross (kg) 53 / 61 AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug Amperage Running: 2.9A Rated: 2.9A Starting: 17A Refrigerant Charge R134a / 200g Operating Conditions Ambient Temp.: 1-40°CWater Supply Temp.: 5-35°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6% Product Dimensions: 633(W) x 506(D) x 930(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

HIGHEST QUALITY ICE This ice maker is part of a unique range of cubers; designed with hygiene as a priority. Each ice cycle is made with fresh water, ensuring only the highest quality of ice. The cubes are easily recognized by its precise shape, clarity and slow dilution. This is particularly important for ice that is used in premium beverages like cocktails, as it protects the integrity and flavor of the drink. This model is configured with our storage bins, and can be stacked to multiply the ice production. New intelligent control circuit dedicated to saving power and water consumption. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil. Large Ice Cube Makers are specifically designed for bars, to be used in cocktails and not for general ice and especially blending purposes. Large Ice Cubes (above 22mm) cannot be blended for juices, smoothies etc Production Capacity per 24hours Approx. 40kg @10°C Air temp; 10°C Water Approx. 33kg @ 21°C Air temp; 15°C Water Approx .25kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 26kg Freeze Cycle Time Approx. 62 Min Ice Production Per cycle Approx. 1.44kg/12pcs Dimensions 633mm (W) x 506mm (D) x 950mm (H) (Units include adjustable legs 90-125mm) Cooling Air Weight Net/Gross (kg) 53 / 61 AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug Amperage Running: 2.5A Rated: 2.5A Starting: 15A Refrigerant Charge R134a / 230g Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6% Product Dimensions: 633(W) x 506(D) x 950(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

CHILL BEVERAGES WITH MINIMAL DILUTION The Hoshizaki IM-65NE-Q is a self-contained under counter ice maker producing clean, pure and perfectly round Ball Ice. It is suitable for placement in bars. Produces up to 20kg per 24 hours and has a storage capacity of 17kg. Easy maintenance, low water and energy consumption. Each ice ball individually made by a jet spray. Automatically drains and refills after each new batch, for fresh, hygienic ice. Easily dismantled for cleaning. Closed water circuit offers the ultimate contamination protection. Hoshizaki ice makers are micro computer controlled, controlling the ice making process to perform at its best under varying circumstances, without having to make physical adjustments. A stainless steel exterior provides a hygienic and high quality finish. Foam injected polyurethane for insulation (JFC free), helps preserve the quality and consistency of the ice produced, reducing the number of production cycles. An easily cleanable air filter allows end users to carry out a routine cleaning schedule, extending product life expectancy and reducing the frequency and costs of maintenance call-outs. Ball Ice Makers are specifically designed for bars, to be used in cocktails and not for general ice and especially blending purposes. Ball Ice cannot be blended for juices, smoothies etc Production Capacity per 24hours Approx. 26kg @10°C Air temp; 10°C Water Approx. 24kg @21°C Air temp; 15°C Water Approx. 20kg @32°C Air temp; 21°C Water Max Storage Capacity Approx. 17kg (Bin Control Setting Approx. 9 kg) Freeze Cycle Time Approx. 33 Min Ice Production Per cycle Approx. 0.67kg/15pcs Dimensions 633mm (W) x 506mm (D) x 950mm (H) (Units include adjustable legs 90-125mm) Cooling Air Weight Net/Gross (kg) 53 / 66 AC Supply Voltage 1 PHASE 220-240V 50Hz /10 AMP Plug Amperage Running: 2.9A Rated: 2.9A Starting: 17A Refrigerant Charge R134a / 200g Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6% Product Dimensions: 633(W) x 506(D) x 950(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

HIGHEST QUALITY ICE This ice maker is part of a unique range of cubers; designed with hygiene as a priority. Each ice cycle is made with fresh water, ensuring only the highest quality of ice. The cubes are easily recognized by its precise shape, clarity and slow dilution. This is particularly important for ice that is used in premium beverages like cocktails, as it protects the integrity and flavor of the drink. This model is configured with our storage bins, and can be stacked to multiply the ice production. New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil. Production Capacity per 24hours Approx. 90kg @10°C Air temp; 10°C Water Approx. 85kg @21°C Air temp; 15°C Water Approx. 62kg @32°C Air temp; 21°C Water Max Storage Capacity Approx. 38kg ( Bin Control Setting Approx. 23Kg) Freeze Cycle Time Approx. 17 Min Ice Production Per cycle Approx. 1.15kg/190pcs Dimensions 1004mm (W) x 600mm (D) x 800mm (H) (Units include adjustable legs 90-125mm) Cooling Air Weight Net/Gross (kg) 77 / 88 AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug Amperage Running: 4.1A Rated: 4.1A Starting: 19A Refrigerant Charge R134a / 280g Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6% Product Dimensions: 1004(W) x 600(D) x 800(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less