Blizzard

The Blizzard SN-80P is a self-contained under bench cube ice maker that produces up to 36kg of ice per 24 hours and stores around 15kg in its insulated bin, giving compact venues a steady, self-managed ice supply from a single 500mm-wide cabinet. Why operators choose the SN-80P Up to 36kg/24h output — enough cube ice for cafes, small bars and offices without a remote ice plant. ~15kg integrated storage — built-in bin (bin control setting approx. 8.5kg) holds a working buffer between cycles. Air-cooled condenser — simple install with no separate water-cooling loop required. Stainless steel exterior — wipe-clean, corrosion-resistant body built for commercial use. Under bench footprint — 500(W) x 450(D) x 800(H)mm fits neatly beneath a standard bench. Specifications Brand Blizzard Model / MPN SN-80P Type Self Contained Ice Maker Ice production Up to 36kg / 24h Ice storage capacity Approx. 15kg (bin control approx. 8.5kg) Ice shape Cube (22mm) Condenser / cooling Air cooled Construction Stainless steel Doors 1 (hinged) Power 240V; 370W; 10amp plug and lead included Product dimensions 500(W) x 450(D) x 800(H)mm Packed dimensions 580(W) x 530(D) x 835(H)mm Net weight 36kg Warranty 2 Years Parts & Labour Venue suitability: A practical fit for cafes, small bars, offices, medical and hospitality sites that need reliable cube ice on demand but lack the space for a full-size modular ice machine. Browse the full range of Self Contained Ice Makers or see more from Blizzard for matching options. Installation & delivery: Connects to a standard mains water supply and a 10amp power point with the supplied plug and lead; air-cooled operation means no water-cooling loop to plumb. Allow clearance around the louvred panels for airflow. Dispatched Australia-wide. Frequently asked questions How much ice does the Blizzard SN-80P make per day? It produces up to 36kg of cube ice over 24 hours under standard conditions. How much ice can it store? The integrated bin holds approximately 15kg, with a bin control setting of approximately 8.5kg. What shape and size is the ice? It makes solid cube ice at around 22mm. Is the SN-80P air or water cooled? It is air cooled, so it does not require a separate water-cooling connection. What warranty does it come with? The SN-80P is backed by a 2 Years Parts & Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-120P is a compact self-contained, air-cooled under bench cube ice maker that produces up to 55 kg of ice per 24 hours, with an 18 kg storage bin. WaterMark-certified and finished in stainless steel, its slim 500 mm-wide cabinet suits small cafes, bars and offices where bench space is tight. Why operators choose the SN-120P Up to 55 kg cube ice per 24h - right-sized output for cafes, small bars and offices 18 kg storage bin - a handy buffer of ready ice for service Slim 500 mm cabinet - fits tight under bench spaces 22 mm cube ice - clear, slow-melting cubes for drinks WaterMark certified - meets Australian plumbing certification requirements Air-cooled, stainless steel - no cooling-water circuit and an easy-clean finish Specifications Brand Blizzard Model / MPN SN-120P Type Self Contained Ice Maker Ice type Cube (22 mm) Ice output Up to 55 kg / 24h Ice storage 18 kg Cooling Air-cooled Body material Stainless steel Country of manufacture China Certification WaterMark certified Power 240 V; 480 W; 10 A Power type Electric (single phase) Product dimensions 500(W) x 590(D) x 850(H) mm Packed dimensions 670(W) x 580(D) x 835(H) mm Net weight 45 kg Packed weight 60 kg Warranty 2 Years Parts and Labour Venue suitability: At 55 kg a day from a 500 mm-wide cabinet, the SN-120P suits small cafes, offices, bars and staff kitchens with modest ice needs and limited bench space. It is a right-sized entry unit rather than a high-volume machine, so busier venues should step up to a larger model. See the rest of our self-contained ice makers or the full Blizzard ice range to match output and footprint to your site. Installation & delivery: Ships with a 240 V 10 A plug and lead and requires a cold water supply and drain, plus clearance for the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-120P make and hold? Up to 55 kg of cube ice per 24 hours, with an 18 kg onboard storage bin. How wide is the cabinet? Just 500 mm wide, so it fits tight under bench spaces. What size ice does it produce? Clear 22 mm cube ice. What power and connections does it need? A 240 V 10 A supply (plug and lead included) drawing 480 W, plus a cold water supply and a drain. Is it certified for Australia? Yes, the SN-120P is WaterMark certified. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-25C is a compact underbench bullet ice maker that produces up to 25kg of hard, clear bullet ice every 24 hours from a slim 375mm-wide cabinet. Its spray-type evaporator builds dense, slow-melting ice, making it ideal for small bars, cafes and offices where bench and floor space is tight.Why operators choose the SN-25C Up to 25kg/24h bullet ice - right-sized output for cafes, small bars and staff rooms Slim 375mm width - fits underbench in tight service areas Spray-type evaporator - produces clear, high-hardness bullet ice (28mm dia. x 40mm) Approx. 15kg internal bin - on-board storage for immediate use Stainless steel exterior - durable and easy to clean in commercial settings WaterMark certified - suitable for plumbed installation to Australian standards Specifications Brand Blizzard Model / MPN SN-25C Type Underbench self-contained ice maker Ice type Bullet (28mm dia. x 40mm) Ice output Up to 25kg / 24h Bin storage Approx. 15kg Condenser Air-cooled Refrigerant R290 (90g) Power 240V / 50Hz; 300W; 10A External material Stainless steel Product dimensions 375(W) x 575(D) x 762(H)mm Packed dimensions 665(W) x 470(D) x 740(H)mm Net weight 39kg Country of manufacture China Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: A strong fit for space-limited venues with modest ice needs - espresso bars, small cafes, offices, medical rooms and bar service stations - where the slim 375mm underbench footprint matters more than volume. For high-turnover bars or restaurants, step up to a higher-output model.Compare more self-contained ice makers or browse the wider Blizzard range to size up if you need more output.Installation & delivery: Connects to a standard 240V/10A single-phase outlet with a plumbed water supply; the unit is WaterMark certified for Australian installation. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-25C make per day? It produces up to 25kg of bullet ice every 24 hours, with an internal bin holding approximately 15kg.Will the SN-25C fit underbench? Yes. It measures 375(W) x 575(D) x 762(H)mm, so it slots into most standard underbench cavities in bars and cafes.What kind of ice does it make? It makes hard, clear bullet ice roughly 28mm in diameter x 40mm, which melts slowly and is ideal for drinks service.Is the SN-25C suitable for Australian plumbing? Yes. It is WaterMark certified for connection to a plumbed water supply to Australian standards.Does it need ongoing maintenance? Yes. Replace the water filter cartridge every 6 months and descale regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-420P is a self-contained cube ice maker that pairs a modular ice head with an integrated storage bin to keep busy venues supplied with clear, hard cube ice throughout service. Why operators choose the SN-420P Up to 189kg/24h output — high daily production for bars, restaurants and function venues. ~125kg bin storage — a large integrated bin (bin-control setting approx. 110kg) buffers peak demand. 22mm³ cube ice — slow-melting, clear cubes ideal for beverages and food service. Air-cooled operation — simple installation with no separate water-cooling loop. Quality components — Aspera compressor, EBM-Papst fan and Morrill water pump for reliable, serviceable running. Specifications Brand Blizzard Model / MPN SN-420P Type Self-Contained Cube Ice Maker Ice Production (24h) Up to 189kg Bin Storage Capacity Approx. 125kg (bin control approx. 110kg) Ice Shape 22mm³ cube Cooling Air-cooled Refrigerant R404A Doors 1 (hinged) Construction Stainless Steel Power 240V; 920W; 10A Product Dimensions 560(W) x 860(D) x 1745(H)mm Net Weight 85kg Certification Watermark certified Warranty 2 Years Parts & Labour Venue suitability: Suited to high-demand hospitality settings — bars, restaurants, cafes, clubs and function venues that need a steady supply of cube ice through service. As an air-cooled self-contained unit it installs against a wall with adequate ventilation and a standard 10A power point. Browse the full range of Self Contained Ice Makers or see more equipment from Blizzard to match this unit to your kitchen. Installation & delivery: Supplied with a 10A plug and lead for straightforward connection; allow clearance around the unit for air-cooled ventilation. Dispatched Australia-wide. Frequently asked questions How much ice does the SN-420P produce per day? It produces up to 189kg of cube ice in a 24-hour period, suiting high-volume venues. How much ice can the bin store? The integrated storage bin holds approximately 125kg, with a bin-control setting of approximately 110kg. What ice shape does it make? It produces 22mm³ cube ice — clear, slow-melting cubes ideal for beverages and food presentation. Is the SN-420P air-cooled or water-cooled? It is air-cooled, so it does not require a separate water-cooling connection; just allow ventilation clearance around the unit. What warranty does it come with? The SN-420P is supplied with a 2-year parts and labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-210P is a self-contained air-cooled ice maker that produces up to 95 kg of cube ice per 24 hours and stores approximately 28 kg in its integrated bin, giving busy bars, cafes and kitchens a continuous on-demand ice supply from a single under-bench footprint.Why operators choose the SN-210P Up to 95 kg/24h output — keeps service running through peak periods without a separate ice store. ~28 kg integrated bin — built-in storage means ice is ready the moment you need it. Air-cooled, self-contained design — no external condenser to plumb; sits under the bench and runs from a standard 10A outlet. 22mm cube ice — clear, slow-melting cubes suited to spirits, soft drinks and display. Stainless steel body, WaterMark certified — durable, hygienic and compliant for Australian installation. Specifications Brand Blizzard Model / MPN SN-210P Type Self Contained Ice Maker Ice Production Up to 95 kg / 24h Bin Storage Capacity Approx. 28 kg Ice Shape 22mm cube Cooling Air cooled Refrigerant R290 Body / Construction Stainless Steel Power 240V; 670W; 10A plug and lead included Product Dimensions 660(W) x 707(D) x 919(H)mm Packed Dimensions 760(W) x 746(D) x 929(H)mm Net Weight 58 kg Certification WaterMark certified Warranty 2 Years Parts and Labour Venue suitability: Ideal for bars, cafes, restaurants and function venues that need a reliable under-bench ice supply without a remote condenser. It sits alongside our other Self Contained Ice Makers and the wider Blizzard refrigeration range, so you can match capacity to your service volume.Installation & delivery: Plugs into a standard 10A power outlet and requires a mains water connection; a water filter must be fitted to keep the warranty valid. Dispatched Australia-wide.Frequently asked questionsHow much ice does the SN-210P make? It produces up to 95 kg of cube ice per 24 hours, with output varying by ambient and water temperature.How much ice can it store? The integrated bin holds approximately 28 kg of ice.Is it air or water cooled? The SN-210P is air cooled and self-contained — there is no separate condenser to install.What ice shape does it make? It makes 22mm cube ice, suited to spirits, soft drinks and display use.What warranty does it come with? It is covered by a 2 Years Parts and Labour warranty; a water filter must be installed and maintained to keep the warranty valid. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-700P is a self-contained, air-cooled ice maker that produces up to 310 kg of cube ice per 24 hours and holds around 170 kg in its built-in storage bin, built for high-demand bars, hotels and catering kitchens. It runs on a standard 240 V / 10 A supply and combines premium components — an Italian Aspera compressor, US Morrill water pump and German EBM-Papst fan — for dependable round-the-clock output. Why operators choose the SN-700P Up to 310 kg ice per 24 h — heavy-duty production for busy bars, pubs, hotels and event catering Approx. 170 kg on-board bin storage — a large buffer so service never runs short at peak Air-cooled condenser — straightforward install with no water-cooling tower required 22 mm³ cube ice — slow-melting cubes ideal for spirits, cocktails and cold displays Premium global components — Aspera compressor, Morrill pump, EBM-Papst fan and Danfoss valves for long service life WaterMark certified — meets Australian plumbing compliance Specifications Brand Blizzard Model / MPN SN-700P Type Self-Contained Ice Maker Ice production Up to 310 kg / 24h Bin storage Approx. 170 kg Ice type 22 mm³ cube Cooling Air-cooled Power 240 V; 1680 W; 10 A Product dimensions 760(W) x 860(D) x 1745(H)mm Packed dimensions 880(W) x 910(D) x 1780(H)mm Net weight 105 kg Exterior material Steel Compressor Italian Aspera Water pump US Morrill Certification WaterMark Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-700P suits high-volume venues — busy bars, pubs, hotels, function centres and catering operations that need a large daily ice supply from a single self-contained unit. Its air-cooled design suits sites without a water-cooling loop; in warm, poorly ventilated plant rooms allow generous clearance around the condenser for airflow. Compare more Self Contained Ice Makers or view the full Blizzard range to match capacity to your service volume. Installation & delivery: Connects to a standard 240 V / 10 A power point (plug and lead included) plus a mains water supply and drain; position with clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions How much ice does the Blizzard SN-700P make? It produces up to 310 kg of 22 mm³ cube ice per 24 hours, suiting high-demand bars, hotels and catering kitchens. How much ice can it store? The built-in bin holds approximately 170 kg, giving a large buffer between production cycles during peak service. Is it air-cooled or water-cooled? The SN-700P uses an air-cooled condenser, so no separate water-cooling tower is required — just allow airflow clearance around the unit. What power supply does it need? It runs on a standard 240 V / 10 A single-phase supply, with the plug and lead included. Does it need plumbing? Yes — it requires a mains water inlet and a drain connection. Regular filter changes and descaling keep ice quality high and protect the warranty. What warranty is included? The SN-700P is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-1500P is a self-contained air-cooled cube ice maker that produces up to 675 kg of solid 22 mm ice cubes per 24 hours and stores approximately 350 kg in its integrated bin. WaterMark certified and built in stainless steel, it is designed for high-demand venues, function centres and commercial ice supply.Why operators choose the SN-1500P 675 kg/24h cube output — heavy daily production for large venues and events. 350 kg onboard storage — a big buffer that keeps up with sustained demand. 22 mm solid cubes — slow-melting, clear ice for bars, drinks and displays. Air-cooled operation — no water-cooling infrastructure required. WaterMark certified — meets Australian plumbing certification requirements. Premium components (Aspera compressor, Morrill pump, EBM-Papst fan, Danfoss valve) — quality build for continuous running. Specifications Brand Blizzard Model / MPN SN-1500P Type Self-Contained Cube Ice Maker Ice type Cube (22 mm) Ice production 675 kg / 24h Storage bin capacity Approx. 350 kg Cooling Air-cooled External material Stainless steel Power 240V; 3400W; 15A dedicated outlet Country of manufacture China Product dimensions 1227(W) x 965(D) x 1927(H) mm Packed dimensions 1320(W) x 910(D) x 1880(H) mm Net weight Approx. 175 kg Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: The SN-1500P suits high-volume bars, hotels, clubs, event and function venues, and businesses that supply bagged ice. Its 675 kg daily output and 350 kg bin cover sustained heavy demand, but it needs a dedicated 15A circuit and air-cooling clearance, so plan the install space accordingly.Compare it with the full Self Contained Ice Makers range, or view more Blizzard refrigeration to match your fit-out.Installation & delivery: The SN-1500P requires a dedicated 240V 15A outlet (not a standard 10A point), a water supply and drain, and ventilation clearance for air cooling. It is WaterMark certified, backed by a 2-year parts and labour warranty, and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-1500P make per day? It produces up to 675 kg of cube ice every 24 hours under normal operating conditions.What type of ice does it make? It makes solid 22 mm cube ice — clear and slow-melting, ideal for bars and drinks service.How much ice can it store? The integrated bin holds approximately 350 kg.What power supply does it need? It requires a dedicated 240V 15A outlet rather than a standard 10A power point, so allow for an electrician to fit the circuit.Is the SN-1500P WaterMark certified? Yes — it is WaterMark certified for Australian plumbing compliance.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-500P is a large air-cooled self-contained ice maker that produces up to 225kg of ice every 24 hours and stores approximately 170kg in its built-in bin. Built with an Italian Aspera compressor and a U.S. Morrill water pump, and WaterMark certified for Australian installation, it is designed for high-demand venues needing a big on-board ice reserve.Why operators choose the SN-500P Up to 225kg/24h output - substantial daily capacity for busy hospitality and catering sites Approx. 170kg built-in storage - large reserve so ice is on hand through peak periods Air-cooled operation - no water-cooling plumbing needed, just airflow clearance Italian Aspera compressor - dependable refrigeration under sustained commercial load ~22mm cube ice - clear, slow-melting cubes suited to drinks and food service WaterMark certified - approved for plumbed installation to Australian standards Specifications Brand Blizzard Model / MPN SN-500P Type Self-contained air-cooled ice maker Ice type Cube (approx. 22mm) Ice output Up to 225kg / 24h Storage capacity Approx. 170kg Condenser Air-cooled Compressor Italian Aspera Power 240V; 1360W; 10A (plug and lead included) External material Stainless Steel Product dimensions 760(W) x 860(D) x 1745(H)mm Packed dimensions 880(W) x 910(D) x 1780(H)mm Net weight 110kg Country of manufacture China Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: Built for high-turnover operations - restaurants, hotels, clubs, function venues and catering kitchens - where the 225kg daily output and roughly 170kg on-board storage keep service supplied. As an air-cooled unit it needs good ventilation and airflow clearance; it is larger than a small cafe requires.Compare more self-contained ice makers or view the full Blizzard range to match output to your venue.Installation & delivery: Supplied with a 10A plug and lead for a standard 240V single-phase outlet and connects to a plumbed water supply; being air-cooled it needs airflow clearance and good ventilation. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-500P make per day? It produces up to 225kg of cube ice every 24 hours, with a built-in bin storing approximately 170kg.Is the SN-500P air-cooled or water-cooled? It is air-cooled, so it needs airflow clearance and good ventilation but no additional water-cooling plumbing.Is the SN-500P suitable for Australian plumbing? Yes. It is WaterMark certified for connection to a plumbed water supply to Australian standards.What power supply does the SN-500P need? It comes with a 10A plug and lead for a standard 240V single-phase outlet and draws around 1360W.Does the machine need regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-145C is a professional self-contained crescent ice maker that produces up to 145 kg of clear crescent cubes per 24 hours and stores approximately 125 kg in its built-in bin. Running on R404A refrigerant with air or water cooling, its stainless steel cabinet suits bars, restaurants and function venues that need hard, slow-melting ice.Why operators choose the SN-145C 145 kg/24h crescent output — dependable daily volume for high-turnover bars and restaurants. 125 kg onboard bin — a large buffer for peak service and events. 13 x 30 x 35 mm crescent cubes — hard, slow-melting ice that chills without watering down drinks. Air or water-cooled condenser — flexible installation across varied kitchen environments. R404A refrigeration — efficient cooling for consistent ice quality. Stainless steel construction — durable and easy to clean in commercial service. Specifications Brand Blizzard Model / MPN SN-145C Type Self-Contained Crescent Ice Maker Ice type Crescent (13 x 30 x 35 mm) Ice production 145 kg / 24h Storage bin capacity Approx. 125 kg Cooling Air or water-cooled Refrigerant R404A External material Stainless steel Power 240V; 1420W; 10A Country of manufacture China Product dimensions 560(W) x 860(D) x 1720(H) mm Net weight Approx. 90 kg (approx. 120 kg with bin) Warranty 2 years parts and labour Venue suitability: The SN-145C suits cocktail bars, restaurants, hotels and function centres that need hard, slow-melting crescent ice for spirits and mixed drinks. Its 145 kg daily output and 125 kg bin handle medium-to-high volume service, and the air-or-water cooling choice makes it adaptable to kitchens with limited ventilation.Compare it with other Self Contained Ice Makers or explore the wider Blizzard refrigeration range to suit your venue.Installation & delivery: The SN-145C runs on a 240V 10A supply and needs a water connection and drain; the condenser can be air or water-cooled depending on your site. It carries a 2-year parts and labour warranty and is dispatched Australia-wide, typically in separate machine and bin cartons.Frequently asked questionsHow much ice does the Blizzard SN-145C make per day? It produces up to 145 kg of crescent ice every 24 hours under normal conditions.What size and shape is the ice? It makes crescent cubes measuring approximately 13 x 30 x 35 mm — hard and slow to melt, ideal for bar service.How much ice can it store? The built-in bin holds approximately 125 kg.Is it air-cooled or water-cooled? The SN-145C offers an air or water-cooled condenser, so it can be installed in kitchens with or without strong ventilation.What refrigerant does it use? It uses R404A refrigerant.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SD-130B is a no-touch commercial ice dispenser that stores and hygienically dispenses ice, built for high-traffic bars, hotels and self-serve venues. It holds a 60 kg ice bin, runs on a standard 240 V outlet, and pairs with a separate Blizzard ice machine head (SN-420P, SN-145C or SN-280C) to form a complete ice system. Why operators choose the SD-130B No-touch dispensing - staff and guests take ice without hand contact, improving hygiene and food-safety compliance 60 kg ice bin - buffers a full service of ice for busy bars, cafes and convenience stores 304-grade stainless steel body - corrosion-resistant, hard-wearing and quick to wipe down UV sterilisation module - high-efficiency sanitising helps keep stored ice clean Adjustable feet - level the cabinet on uneven commercial flooring Pairs with a Blizzard ice head - designed to run with the SN-420P, SN-145C or SN-280C machine head (sold separately) Specifications Brand Blizzard Model / MPN SD-130B Type Ice & Water Dispenser Ice bin capacity 60 kg Compatible machine heads SN-420P, SN-145C, SN-280C Body material 304 stainless steel Sterilisation UV module Power 240 V; 210 W; 10 A Power type Electric (single phase) Product dimensions 560(W) x 855(D) x 1360(H) mm Packed dimensions 918(W) x 645(D) x 1410(H) mm Net weight 77 kg Packed weight 205 kg Warranty 2 Years Parts and Labour Venue suitability: The no-touch dispense head and 60 kg bin make the SD-130B a strong fit for self-serve bars, hotels, healthcare and convenience stores where hygiene and steady ice availability matter. It is a storage-and-dispense unit rather than a stand-alone maker, so it suits venues ready to run it with a matched Blizzard ice head. To complete the system, browse our ice & water dispensers and the wider Blizzard ice range to select a compatible machine head. Installation & delivery: Plugs into a standard 240 V 10 A outlet and must be paired with a Blizzard machine head to produce ice. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions Does the SD-130B make its own ice? No. It is a dispenser and storage bin that must be paired with a Blizzard ice machine head - the SN-420P, SN-145C or SN-280C - to produce ice. How much ice does the bin hold? The SD-130B has a 60 kg ice storage bin. What power supply does it need? A standard 240 V 10 A outlet; the dispenser draws 210 W. How does it keep ice hygienic? Ice is dispensed with no hand contact and a built-in UV sterilisation module helps sanitise stored ice. What warranty is included? It comes with a 2 Years Parts and Labour warranty.

Read more less

The Blizzard SN-1000P is a large self-contained, air-cooled ice maker that produces up to 450 kg of cube ice per 24 hours with around 170 kg of onboard bin storage. Floor-standing and built from stainless steel, it is WaterMark-certified and suited to high-demand hospitality, function and production sites. Why operators choose the SN-1000P Up to 450 kg cube ice per 24h - high-volume output for hotels, function centres and busy bars ~170 kg bin storage - a large buffer to cover peak service without running dry 22 mm cube ice - clear, slow-melting cubes ideal for spirits and mixed drinks Air-cooled condenser - no cooling-water circuit required Stainless steel construction - a hard-wearing commercial build WaterMark certified - meets Australian plumbing certification requirements Premium components - Italian Aspera compressor, German EBM-Papst fan, Danfoss valve and U.S. Morrill pump Specifications Brand Blizzard Model / MPN SN-1000P Type Self Contained Ice Maker Ice type Cube (22 mm) Ice output Up to 450 kg / 24h Ice storage ~170 kg Cooling Air-cooled Body material Stainless steel Country of manufacture China Certification WaterMark certified Power 240 V; 2400 W (2.4 kW); 15 A Power type Electric (single phase) Product dimensions 760(W) x 860(D) x 1920(H) mm Packed dimensions 848(W) x 925(D) x 1915(H) mm Net weight 124 kg Packed weight 168 kg Warranty 2 Years Parts and Labour Venue suitability: With 450 kg daily output and ~170 kg storage, the SN-1000P is built for high-demand sites - hotels, clubs, function centres, large restaurants and beverage or seafood production - where a small underbench maker would fall short. Its air-cooled condenser needs clear airflow, so allow ventilation space around the cabinet in warmer plant rooms. Explore other self-contained ice makers or the full Blizzard ice range to match daily output to your service volume. Installation & delivery: Ships with a 240 V 15 A plug and lead and requires a cold water supply and drain, plus clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-1000P make and hold? Up to 450 kg of cube ice per 24 hours, with approximately 170 kg of onboard bin storage. What size ice does it produce? Clear 22 mm cube ice, well suited to spirits and mixed drinks. Is it air-cooled or water-cooled? It is air-cooled and needs clear airflow around the condenser; no cooling-water circuit is required. What power and connections does it need? A 240 V 15 A supply (plug and lead included) drawing 2400 W, plus a cold water supply and drain. Is it certified for Australia? Yes, the SN-1000P is WaterMark certified. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-101B is a self-contained, air-cooled under bench ice maker that produces up to 100 kg of cube ice per 24 hours, with about 30 kg of bin storage. It runs on natural R290 refrigerant, is finished in stainless steel and fits under a standard bench in cafes, bars and staff rooms. Why operators choose the SN-101B Up to 100 kg cube ice per 24h - reliable daily output for cafes, bars and small kitchens ~30 kg bin storage - holds a service buffer of ready ice R290 natural refrigerant - a low-GWP, more environmentally friendly cooling option 23 mm cube ice - clear cubes that melt slowly in drinks Air-cooled, stainless steel - no cooling-water circuit and a durable commercial finish Quality components - German EBM-Papst fan, Danfoss valve and U.S. Morrill water pump Specifications Brand Blizzard Model / MPN SN-101B Type Self Contained Ice Maker Ice type Cube (23 mm) Ice output Up to 100 kg / 24h Ice storage ~30 kg Refrigerant R290 Cooling Air-cooled Body material Stainless steel Country of manufacture China Power 240 V; 420 W; 10 A Power type Electric (single phase) Product dimensions 666(W) x 650(D) x 780(H) mm Packed dimensions 760(W) x 746(D) x 780(H) mm Net weight 67 kg Packed weight 78 kg Warranty 2 Years Parts and Labour Venue suitability: The 100 kg daily output and slim under bench build make the SN-101B a good match for cafes, bars, staff rooms and medical rooms that need steady ice without a floor-standing machine. Its R290 refrigerant suits operators prioritising lower-GWP equipment; for very high-volume sites a larger floor model is a better fit. Browse more self-contained ice makers or the full Blizzard ice range to size the right unit for your daily demand. Installation & delivery: Requires a 240 V 10 A outlet plus a cold water supply and drain, and clearance for the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-101B make and hold? Up to 100 kg of cube ice per 24 hours, with approximately 30 kg of bin storage. What refrigerant does it use? Natural R290 refrigerant, which has a low global-warming potential. What size ice does it produce? Clear 23 mm cube ice. What power and connections does it need? A 240 V 10 A outlet drawing 420 W, plus a cold water supply and a drain. Is it air-cooled? Yes; it is air-cooled and needs clear airflow around the condenser, so no cooling-water circuit is required. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-31A is a compact underbench self-contained ice maker that produces up to 31kg of cube ice every 24 hours from a small 460mm-wide cabinet. Air-cooled with a removable water filter, it delivers clear ~22mm cube ice for cafes, bars and small food outlets where space is limited.Why operators choose the SN-31A Up to 31kg/24h cube output - practical daily volume for cafes, bars and small kitchens Compact 460mm-wide cabinet - fits underbench in space-tight venues Clear ~22mm cube ice - versatile, slow-melting ice for drinks and food service Air-cooled operation - simple install with no water-cooling plumbing Removable water filter included - easier routine cleaning and maintenance Stainless steel exterior - hard-wearing and easy to wipe down Specifications Brand Blizzard Model / MPN SN-31A Type Underbench self-contained ice maker Ice type Cube (approx. 22mm) Ice output Up to 31kg / 24h Bin storage Approx. 10kg Condenser Air-cooled Power 220-240V; 310W; 10A Refrigerant R290 (90g) Certification WaterMark certified External material Stainless steel Product dimensions 460(W) x 430(D) x 800(H)mm Packed dimensions 505(W) x 545(D) x 775(H)mm Net weight 38kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Suited to low-to-moderate ice users with limited space - cafes, small bars, offices, medical rooms and takeaway outlets - where the 460mm underbench footprint and modest 31kg daily output are the right fit. For high-volume bars or restaurants, choose a larger-capacity model.Compare more self-contained ice makers or browse the wider Blizzard range if you need greater output.Installation & delivery: Connects to a standard 240V/10A single-phase outlet with a plumbed water supply; it is air-cooled, so allow airflow clearance around the cabinet. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-31A make per day? It produces up to 31kg of cube ice every 24 hours, with an internal bin holding approximately 10kg.Will the SN-31A fit underbench? Yes. At 460(W) x 430(D) x 800(H)mm it suits most standard underbench cavities in cafes and small bars.What size ice does it make? It produces clear cube ice of approximately 22mm, well suited to drinks and general food service.Is the SN-31A air-cooled? Yes. It is air-cooled, so it needs airflow clearance around the cabinet but no additional water-cooling plumbing.Does it need regular maintenance? Yes. Replace the removable water filter cartridge every 6 months and descale regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-81B is a self-contained, air-cooled under-bench ice maker that produces up to 80 kg of 22 mm cube ice per 24 hours and stores approximately 30 kg in its built-in bin, sized for cafes, bars and smaller venues. It draws just 4.98 A from a standard 240 V outlet and uses premium components including a US Morrill water pump and German EBM-Papst fans. Why operators choose the SN-81B Up to 80 kg ice per 24 h — a reliable daily supply for cafes, bars and takeaways Approx. 30 kg on-board bin storage — enough buffer to cover typical service peaks Under-bench footprint — slots neatly beneath a bench in tight back-of-house layouts 22 mm³ cube ice — slow-melting cubes for drinks and cold displays Low 4.98 A draw — runs on a standard outlet with modest power demand Premium components — Morrill pump, EBM-Papst fans and Danfoss valves for long service life Specifications Brand Blizzard Model / MPN SN-81B Type Self-Contained Ice Maker Ice production Up to 80 kg / 24h Bin storage Approx. 30 kg Ice type 22 mm³ cube Cooling Air-cooled Refrigerant R290 (120g) Certification WaterMark certified Power 240 V; 610 W; 4.98 A Product dimensions 660(W) x 650(D) x 780(H)mm Packed dimensions 738(W) x 746(D) x 826(H)mm Net weight 58 kg Exterior material Steel Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-81B suits cafes, small bars, takeaways and offices that need a compact under-bench ice supply rather than a floor-standing machine. Its air-cooled design needs only airflow clearance; for high, sustained demand choose a larger-output unit. Browse more Self Contained Ice Makers or view the full Blizzard range to match output to your venue. Installation & delivery: Requires a standard 240 V outlet (4.98 A draw) plus a mains water inlet and drain; allow clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions How much ice does the SN-81B make? It produces up to 80 kg of 22 mm cube ice per 24 hours, suited to cafes, small bars and takeaways. How much ice can it store? The built-in bin holds approximately 30 kg, providing a buffer through service peaks. Will it fit under a bench? Yes — at 660(W) x 650(D) x 780(H)mm it is designed as an under-bench unit for tight back-of-house layouts. What power does it need? A standard 240 V outlet; the unit draws just 4.98 A, along with a mains water inlet and drain. What warranty is included? The SN-81B is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-80C is a self-contained crescent ice maker that delivers up to 95 kg of ice per 24 hours with approximately 40 kg of bin storage, sized for cafes, bars and small-to-mid venues. It uses R404A refrigerant, an air/water-capable condenser and a sliding-door bin, running on a standard 240 V / 10 A supply. Why operators choose the SN-80C Up to 95 kg crescent ice per 24 h — steady supply for cafes, bars and service counters Approx. 40 kg bin behind a sliding door — easy scooping with minimal cold loss R404A refrigerant — efficient, reliable cooling for continuous operation 13 x 30 x 35 mm crescent cubes — clear, slow-melting ice for drinks and displays Air/water condenser capability — flexible installation to suit the site Compact freestanding footprint — fits tight back-bar and prep areas Specifications Brand Blizzard Model / MPN SN-80C Type Self-Contained Ice Maker Ice production Up to 95 kg / 24h Bin storage Approx. 40 kg Ice type 13 x 30 x 35 mm crescent Refrigerant R404A Cooling Air / water condenser Door Sliding door Power 240 V; 770 W; 10 A Product dimensions 650(W) x 651(D) x 1063(H)mm Packed dimensions 750(W) x 740(D) x 1030(H)mm Net weight 61 kg Exterior material Steel Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-80C fits cafes, espresso bars, small restaurants and boutique hotels that need a dependable crescent-ice supply without a full-size machine. Its compact freestanding body (1063mm tall) suits tight back-of-house spaces; for continuous heavy demand, step up to a higher-output model. See more Self Contained Ice Makers or explore the wider Blizzard range to find the right output for your venue. Installation & delivery: Runs on a standard 240 V / 10 A power point and needs a mains water inlet and drain; the condenser can be air or water configured. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions What type of ice does the SN-80C make? It produces 13 x 30 x 35 mm crescent cubes — clear and slow-melting, ideal for drinks service and cold displays. How much ice can it store? The sliding-door bin holds approximately 40 kg, giving a useful buffer for cafe and bar service. What refrigerant does it use? The SN-80C uses R404A refrigerant with an air/water-capable condenser. What power and plumbing does it need? A standard 240 V / 10 A supply plus a mains water inlet and drain connection. What warranty is included? The SN-80C is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-280C is a professional self-contained crescent ice maker that produces up to 280kg of ice every 24 hours and stores approximately 125kg in its built-in bin. With crescent-cut ice (13 x 30 x 35mm), R404A refrigerant and an air/water condenser option, it is built for high-turnover venues that need a large, dependable ice supply.Why operators choose the SN-280C Up to 280kg/24h output - heavy-duty capacity for busy restaurants, bars and function venues Approx. 125kg bin storage - large on-board reserve to ride out service peaks Crescent ice (13 x 30 x 35mm) - slow-melting, drink-friendly ice that packs efficiently Air or water condenser - flexible siting to suit ventilation or ambient conditions R404A refrigeration - reliable cooling performance under commercial load Stainless steel exterior - durable, hygienic and easy to clean Specifications Brand Blizzard Model / MPN SN-280C Type Self-contained crescent ice maker Ice type Crescent (13 x 30 x 35mm) Ice output Up to 280kg / 24h Bin storage Approx. 125kg Condenser Air / water Refrigerant R404A Power 240V; 1800W; 10A External material Stainless steel Product dimensions 760(W) x 860(D) x 1810(H)mm Packed dimensions 650(W) x 890(D) x 2100(H)mm Net weight 119kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Aimed at high-demand sites - busy restaurants, hotels, clubs, function centres and catering operations - where the 280kg daily output and 125kg bin keep pace with sustained service. The air/water condenser choice helps in warm plant rooms or poorly ventilated back-of-house. It is more machine than a low-volume cafe needs.Compare more self-contained ice makers or view the full Blizzard range to match capacity to your site.Installation & delivery: Runs on a 240V/10A single-phase outlet and connects to a plumbed water supply; if water-cooled, a drain and water feed are required. Allow clearance for the chosen condenser type. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-280C make per day? It produces up to 280kg of crescent ice every 24 hours, with a built-in bin storing approximately 125kg.What refrigerant does the SN-280C use? It uses R404A and can run with either an air or water condenser to suit your installation.What shape of ice does it make? It produces crescent-cut ice pieces of roughly 13 x 30 x 35mm, which are slow-melting and ideal for drinks service.What power and water does the SN-280C need? It connects to a 240V/10A single-phase outlet and a plumbed water supply; water-cooled installs also need a drain.Does the machine require regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to protect ice quality and the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-068F is a self-contained underbench granular ice maker that produces up to 60 kg of soft, chewable nugget ice per 24 hours, with a built-in 20 kg storage bin. Air-cooled and finished in stainless steel, its 520 mm-wide cabinet fits beneath a standard bench in cafes, healthcare and venues that prefer granular ice. Why operators choose the SN-068F Up to 60 kg granular ice per 24h - steady output of soft, easy-to-chew nugget ice for drinks, displays and healthcare 20 kg onboard storage - holds a working buffer of ice between production cycles Compact 520 mm underbench footprint - slots beneath a standard counter where space is tight Stainless steel exterior - durable and easy to keep clean in a commercial kitchen Air-cooled operation - no cooling-water circuit required for the condenser Quality components - German EBM-Papst fan, Danfoss expansion valve and U.S. Morrill water pump Specifications Brand Blizzard Model / MPN SN-068F Type Self Contained Ice Maker Ice type Granular (nugget) Ice output Up to 60 kg / 24h Ice storage 20 kg Cooling Air-cooled Body material Stainless steel Power 220-240 V; 50 Hz; 540 W; 10 A Power type Electric (single phase) Product dimensions 520(W) x 560(D) x 955(H) mm Packed dimensions 605(W) x 645(D) x 965(H) mm Net weight 54 kg Packed weight 63 kg Warranty 2 Years Parts and Labour Venue suitability: Granular nugget ice is soft and chewable, making the SN-068F well suited to aged-care and healthcare, cafes, smoothie and juice bars, and blended-drink service where cube ice is less ideal. Its compact underbench build fits venues with limited floor space and moderate daily ice needs rather than high-volume production sites. Compare it with other self-contained ice makers or view the full Blizzard ice range to match the ice type and output your venue needs. Installation & delivery: Runs from a standard 240 V 10 A outlet and requires a cold water supply and drain. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions What type of ice does the SN-068F make? It produces granular (nugget) ice - soft, chewable pellets popular for drinks, healthcare and displays. How much ice does it produce and store? Up to 60 kg per 24 hours, with a 20 kg onboard storage bin. Is it air-cooled or water-cooled? It is air-cooled, so no separate cooling-water circuit is needed. What connections does it need? A 240 V 10 A power outlet plus a cold water supply and a drain. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-258N is a self-contained nugget ice maker that produces up to 250kg of soft, chewable ice every 24 hours and holds 125kg in its built-in bin. Air-cooled and finished in stainless steel, it suits high-demand venues that need a steady supply of easy-to-chew ice from a single freestanding cabinet.Why operators choose the SN-258N Up to 250kg/24h nugget output - keeps busy bars, healthcare sites and QSR venues supplied through peak service 125kg built-in storage bin - large on-board reserve so ice is ready without a separate bin Soft chewable nugget ice - preferred for cold drinks, blended beverages and aged-care/healthcare settings Air-cooled operation - straightforward install with no water-cooling plumbing Stainless steel exterior - hard-wearing and easy to wipe down in commercial kitchens German EBM-Papst fans & U.S. Morrill water pump - quality components for reliable running Specifications Brand Blizzard Model / MPN SN-258N Type Self-contained nugget ice maker Ice type Chewblet / nugget Ice output Up to 250kg / 24h Bin storage 125kg Condenser Air-cooled Power 220-240V / 50Hz; 1180W; 10A External material Stainless steel Product dimensions 560(W) x 860(D) x 1795(H)mm Packed dimensions 890(W) x 785(D) x 1870(H)mm Net weight 115kg Warranty 2 years parts and labour Venue suitability: Best for high-volume sites that get through large amounts of soft ice - hospitals and aged care, bars and clubs, cafes and QSR outlets - where the 125kg bin and 250kg daily output keep pace with demand. Its freestanding cabinet suits back-of-house or service areas; it is oversized for a small cafe with light ice use.Compare more self-contained ice makers or explore the full Blizzard range to match output to your venue.Installation & delivery: Runs on a standard single-phase 220-240V/50Hz, 10A outlet and is air-cooled, so no water-cooling plumbing is needed; allow clearance around the cabinet for airflow. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-258N make per day? It produces up to 250kg of nugget ice every 24 hours under standard conditions, with a 125kg built-in storage bin.What type of ice does the SN-258N produce? It makes soft, chewable chewblet/nugget ice, which is popular in bars, healthcare settings and for blended and cold drinks.Is the SN-258N air-cooled or water-cooled? It is air-cooled, so it needs airflow clearance around the cabinet but no additional water-cooling plumbing.What power supply does the SN-258N need? It connects to a single-phase 220-240V/50Hz, 10A supply and draws around 1180W.Does the ice maker need regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to keep ice quality high and protect the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-2000P is a self-contained air-cooled cube ice machine that produces up to 900 kg of solid 22 mm ice cubes per 24 hours and stores approximately 350 kg in its integrated bin. Powered by a three-phase supply and built in stainless steel, it is engineered for the highest-demand kitchens, clubs and commercial ice production.Why operators choose the SN-2000P Up to 900 kg/24h output — top-tier daily production for the busiest operations. 350 kg onboard storage — a substantial buffer for continuous service. 22 mm solid cubes — clear, slow-melting ice for premium drinks service. Three-phase power — steady supply for a high-capacity machine. Air-cooled design — no water-cooling plant required. Premium components (Morrill pump, EBM-Papst fans, Saginomiya valve) — reliability under heavy load. Specifications Brand Blizzard Model / MPN SN-2000P Type Self-Contained Cube Ice Maker Ice type Cube (22 mm) Ice production Up to 900 kg / 24h Storage bin capacity Approx. 350 kg Cooling Air-cooled External material Stainless steel Power 380V / 50Hz; 4000W; three-phase + neutral Product dimensions 1262(W) x 965(D) x 2057(H) mm Packed dimensions 1320(W) x 910(D) x 2050(H) mm Shipping weight 666 kg Warranty 2 years parts and labour Venue suitability: The SN-2000P suits large clubs, hotels, stadiums, event caterers and businesses supplying bagged ice, where daily demand runs into hundreds of kilograms. Its up-to-900 kg output and 350 kg bin cover the heaviest workloads, but it needs a three-phase power supply and professional installation, so it is not suited to sites limited to single-phase power.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration for your venue.Installation & delivery: The SN-2000P requires a three-phase power supply installed by a licensed electrician, plus a water connection, drain and ventilation clearance for air cooling. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-2000P make per day? It produces up to 900 kg of cube ice every 24 hours under normal operating conditions.What type of ice does it make? It makes solid 22 mm cube ice — clear and slow-melting, suited to premium drinks and bulk supply.How much ice can it store? The integrated bin holds approximately 350 kg.What power supply does it need? It runs on a three-phase supply and must be connected by a licensed electrician — it is not a plug-in single-phase unit.Is the SN-2000P air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the machine.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-128F is a self-contained granular ice maker that produces up to 120 kg of soft granular ice per 24 hours and holds 50 kg in its integrated storage bin. Air-cooled and finished in stainless steel, it is built for cafes, bars and healthcare kitchens that need a steady supply of chewable ice from a compact footprint.Why operators choose the SN-128F 120 kg/24h granular output — reliable daily volume for busy service without oversizing the plant. 50 kg onboard storage bin — buffers peak demand so ice is ready when orders spike. Soft, high-hardness granular ice — easy to chew and ideal for cold drinks, seafood displays and healthcare use. Air-cooled stainless steel build — simple to install and wipe down in a commercial kitchen. German EBM-Papst fan and Danfoss expansion valve — quality refrigeration components for consistent running. Modular, easy-to-move design — straightforward to position and service. Specifications Brand Blizzard Model / MPN SN-128F Type Self-Contained Granular Ice Maker Ice type Granular Ice production 120 kg / 24h Storage bin capacity 50 kg Cooling Air-cooled External material Stainless steel Power 220-240V / 50Hz; 710W; 10A Product dimensions 650(W) x 660(D) x 1050(H) mm Packed dimensions 738(W) x 746(D) x 1026(H) mm Net weight 79 kg Shipping weight 142 kg Warranty 2 years parts and labour Venue suitability: The SN-128F suits cafes, cocktail bars, aged-care and healthcare kitchens, and seafood or salad displays where soft, chewable granular ice is preferred over hard cubes. Its 120 kg daily output and 50 kg bin fit small-to-medium venues; high-turnover sites pulling ice all day should size up to the 250 kg SN-258F.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration to match the rest of your kitchen.Installation & delivery: The SN-128F runs on a standard 240V 10A power point and needs a nearby water supply and drain plus clearance for air-cooled ventilation. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-128F make per day? It produces up to 120 kg of granular ice every 24 hours under normal operating conditions.How much ice can it store? The integrated bin holds approximately 50 kg, so ice is buffered for busy periods.What type of ice does it make? It makes soft, high-hardness granular (nugget-style) ice that is easy to chew and well suited to drinks, displays and healthcare settings.Is the SN-128F air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the unit for reliable performance.What power supply does it need? It connects to a standard single-phase 240V 10A power point.What warranty does it come with? The SN-128F is covered by a 2-year parts and labour warranty, subject to regular maintenance of the water filter and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-258F is a self-contained granular ice maker that produces up to 250 kg of soft granular ice per 24 hours and stores 125 kg in its built-in bin. Air-cooled and finished in stainless steel, it is built for busy bars, healthcare kitchens and seafood or buffet displays that get through large volumes of chewable ice.Why operators choose the SN-258F 250 kg/24h granular output — high daily volume for demanding, high-turnover venues. 125 kg storage bin — a generous buffer for extended peak service. Soft, high-hardness granular ice — easy to chew and ideal for drinks, displays and healthcare use. Air-cooled stainless steel build — straightforward to install and keep clean. German EBM-Papst fan and Danfoss expansion valve — quality refrigeration for consistent output. Modular, easy-to-move design — simple positioning and servicing. Specifications Brand Blizzard Model / MPN SN-258F Type Self-Contained Granular Ice Maker Ice type Granular Ice production 250 kg / 24h Storage bin capacity 125 kg Cooling Air-cooled External material Stainless steel Power 220-240V / 50Hz; 1180W; 10A Product dimensions 560(W) x 860(D) x 1795(H) mm Packed dimensions 785(W) x 890(D) x 1870(H) mm Shipping weight 327 kg Warranty 2 years parts and labour Venue suitability: The SN-258F suits high-volume bars, aged-care and healthcare kitchens, and seafood or buffet displays where soft, chewable granular ice is preferred. Its 250 kg daily output and 125 kg bin serve larger sites; smaller venues with lighter demand can consider the 120 kg SN-128F instead.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration to match your kitchen.Installation & delivery: The SN-258F runs on a standard 240V 10A power point and needs a nearby water supply and drain plus clearance for air-cooled ventilation. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-258F make per day? It produces up to 250 kg of granular ice every 24 hours under normal operating conditions.How much ice can it store? The integrated bin holds 125 kg, buffering supply through busy periods.What type of ice does it make? It makes soft, high-hardness granular (nugget-style) ice that is easy to chew and well suited to drinks, displays and healthcare settings.Is the SN-258F air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the unit.What power supply does it need? It connects to a standard single-phase 240V 10A power point.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular water-filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less