Commercial kitchen cabinets in stainless steel for Australian cafes, restaurants and catering kitchens — wall cabinets, floor and bench cabinets, mobile units and pass-through cabinets that keep dry stock, crockery and smallwares enclosed and food-safe. Stainless cabinetry is the hygienic alternative to laminate joinery in a commercial fit-out: wipe-down surfaces, no swelling near heat or moisture, and a finish health inspectors expect. Pair enclosed storage with open storage shelving, or add kitchen wall shelves above your benches.
Who commercial kitchen cabinets are for
Anywhere food is prepped commercially, enclosed stainless storage earns its place: cafes keep crockery and takeaway packaging dust-free at the service end; restaurants store dry goods and chemicals in separate enclosed units; commissary and club kitchens use pass-through cabinets between kitchen and servery so plates move without staff crossing the line. Mobile cabinets on castors double as extra bench space during prep and roll away for cleaning.
What's in scope
Wall cabinets
Enclosed overhead storage that keeps the floor clear — sliding-door stainless boxes mounted above benches for crockery, dry stock and smallwares.
Floor, bench and tidy cabinets
Cabinet bases with stainless worktops, doors and drawers — storage below, prep surface on top. Kitchen tidy variants integrate sinks and waste cut-outs into one wash-and-store station.
Mobile cabinets
Lockable cabinets on castors with drawers and shelves, for kitchens that re-arrange between prep and service or need equipment moved for nightly cleaning.
Pass-through cabinets
Double-sided access cabinets that sit between kitchen and servery, so plates and stock load from one side and unload from the other.
How to choose a commercial kitchen cabinet in three steps
Picking the right stainless cabinet comes down to three questions, in order.
Step 1 — Wall, floor or mobile?
Decide where the storage lives: overhead wall cabinets keep floor area free, floor and bench cabinets add work surface with storage under, and mobile units suit kitchens that reconfigure. If stock needs to cross between rooms, a pass-through cabinet replaces double-handling.
Step 2 — Doors, drawers or both?
Sliding doors suit tight aisles where hinged doors would block the line; drawers index smallwares so staff aren't digging in deep shelves. Tidy cabinets with integrated sinks combine the wash point and storage where space is tight.
Step 3 — Measure and match the grade
Measure your wall run, ceiling height and aisle clearance, then check the build spec on each product page — 304-grade stainless options are the benchmark for food-contact surfaces, and adjustable feet matter on uneven commercial floors.
Venue fit
A cafe usually starts with a wall cabinet over the back bench and a tidy cabinet at the wash point; restaurants add floor cabinets along the prep line; clubs and commissaries fit pass-through units at the servery. Much of this range comes from Modular Systems, whose stainless cabinetry is built for Australian commercial kitchens. Need indexed storage rather than enclosed boxes? See our stainless steel drawer units.
Why are commercial kitchen cabinets made from stainless steel?
Stainless steel is non-porous, corrosion-resistant and tolerates heat, steam and aggressive cleaning chemicals — which is why it's the default for commercial kitchen cabinetry in Australia. Unlike laminate or timber joinery, stainless doesn't swell, harbour bacteria in chipped edges or degrade near cooking lines, and it presents well at health inspection.
What's the difference between a wall cabinet and a bench cabinet?
A wall cabinet mounts above the bench for overhead storage, keeping floor space free; a bench (or floor) cabinet sits on the floor with a stainless worktop on top, adding both storage and work surface. Most kitchens use both: wall cabinets for light smallwares, bench cabinets for heavier stock and equipment.
What is a kitchen tidy cabinet?
A kitchen tidy cabinet is a stainless cabinet base that integrates a sink bowl and often a waste chute or bin cut-out into one unit, combining the wash point, waste handling and enclosed storage in a single footprint. They're popular in cafes and small commercial kitchens where every metre of wall has to multitask.
What is a pass-through cabinet used for?
A pass-through cabinet has access doors on both faces, so it can sit in a partition or counter line between the kitchen and servery — staff load plates or stock from the kitchen side and front-of-house unloads from the other. It cuts double-handling and keeps service flowing without staff crossing zones.
Are these cabinets food-safe and inspection-ready?
Stainless cabinets are the accepted standard for enclosed storage in registered food businesses: smooth, washable, non-absorbent surfaces that meet the expectations of Australian food-premises guidelines. Keep food, chemicals and cleaning gear in separate enclosed units to satisfy storage-separation requirements.
Do you deliver commercial kitchen cabinets across Australia?
Yes. Commercial Kitchen Store ships nationwide, and Australian-based phone support is available on 1300 111 901 if you need help planning storage for your fit-out. For cover details, see our warranty and service information.
The Modular Systems WC-0900 is a wall-mounted stainless steel cabinet that provides hygienic, space-efficient overhead storage for commercial kitchens, cafes, and food service operations requiring clean and accessible equipment housing above work surfaces.Why operators choose the WC-0900
304-grade construction — 1.2mm solid stainless steel body, polished inside and out for a hygienic finish that is easy to clean
Sliding door design — two sliding doors allow access without swinging clearance, ideal for tight kitchen spaces
Middle shelf included — comes preassembled with a middle shelf for flexible storage of smallwares, containers, and dry goods
Wall-mounted profile — keeps bench surfaces clear while utilising overhead space efficiently
Compact 900mm width — fits above standard workbenches and prep areas without dominating the run
Specifications
Brand
Modular Systems
Model / MPN
WC-0900
Type
Stainless Steel Wall Cabinet
Width
900 mm
Depth
380 mm
Height
600 mm
Material
304 Stainless Steel, 1.2mm gauge
Doors
2 sliding doors
Shelf
1 middle shelf (included)
Net Weight
34.5 kg
Packed Dimensions
1000(W) x 480(D) x 700(H) mm
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: The WC-0900 suits commercial kitchens, cafes, bakeries, catering facilities, and food preparation areas where wall-mounted storage is required above benchtops or cooking lines. Explore the full range of commercial kitchen cabinets or browse all Modular Systems products.Installation & delivery: Pre-assembled and ready to mount. Standard wall-mounting hardware required (not included). Dispatched Australia-wide.Frequently asked questionsWhat material is the WC-0900 made from?The WC-0900 is constructed from 1.2mm 304-grade stainless steel, polished inside and out for easy cleaning and a hygienic surface finish.Does the WC-0900 come with a shelf?Yes. The WC-0900 is supplied preassembled and includes a middle shelf for flexible overhead storage.What are the external dimensions of the WC-0900?The WC-0900 measures 900mm wide, 380mm deep, and 600mm high.What type of doors does the WC-0900 have?The WC-0900 features two sliding doors, which require no swing clearance and suit busy kitchen environments with limited space.What warranty applies to the WC-0900?The WC-0900 is covered by a 2-year parts-only warranty from Modular Systems.
The Modular Systems WC8-0600 is a single-door stainless steel storage cabinet designed for commercial kitchens that need durable, hygienic under-counter storage. Built from SUS304 grade stainless steel and supplied pre-assembled, it delivers immediate utility in food preparation, service, and storage environments across Australia.
Why operators choose the WC8-0600
SUS304 stainless construction — food-safe, corrosion-resistant, and easy to wipe clean between services.
Pre-assembled — no on-site installation effort; unpack and put straight into service.
51mm diameter adjustable legs — stable on uneven floors and compliant with typical commercial kitchen height requirements.
Single door enclosure — keeps stored items protected from kitchen splatter and dust while remaining readily accessible.
600mm wide footprint — modular-friendly sizing that integrates cleanly alongside other Modular Systems stainless benches and tables.
Specifications
Brand
Modular Systems
Model / MPN
WC8-0600
Type
Stainless Steel Cabinet
Construction
SUS304 grade stainless steel
Configuration
Single door, floor-standing
Leg Diameter
51 mm
Assembly
Pre-assembled
Product Dimensions (W × D × H)
600 × 800 × 900 mm
Packed Dimensions (W × D × H)
850 × 645 × 985 mm
Warranty
24 Months Parts Only
Venue suitability: Suited to commercial kitchens in restaurants, cafes, hotel food service, catering operations, and food manufacturing facilities requiring robust stainless storage. Pairs well with the broader Modular Systems range and sits neatly in a Commercial Kitchen Cabinets fitout.
Installation & delivery: Supplied pre-assembled — no assembly required. Position on a level surface and adjust legs as needed. Dispatched Australia-wide.
Frequently asked questions
What material is the WC8-0600 made from?The cabinet is constructed from SUS304 grade stainless steel throughout — top, sides, door, and frame.
Does the WC8-0600 come pre-assembled?Yes. The unit arrives fully pre-assembled and is ready to place into service immediately out of the box.
What are the cabinet dimensions?The WC8-0600 is 600 mm wide, 800 mm deep, and 900 mm high (including legs). Packed dimensions are 850 × 645 × 985 mm.
What warranty applies?The WC8-0600 carries a 24-month parts-only warranty from Modular Systems.
Is this a wall-mounted or floor-standing cabinet?The WC8-0600 is a floor-standing cabinet supported on 51 mm diameter legs — it is not wall-mounted.
Add additional storage in areas with limited space with this Vogue 1200mm stainless steel cupboard. Two sliding doors give you full access to the entire cupboard without needing to take items out, helping to save time.Made from stainless steel with a high resistance to rust and wear, the cupboard is ideal for being kept in busy kitchen areas. This construction also makes it easy to clean, so you can store your essentials in a hygienic location.The wall-mountable option saves essential floor or table space while still expanding cupboard space. An adjustable shelf allows you to change the height depending on what's being stored, giving you flexibility on ingredients or items that are kept in the Vogue cupboard. A 1.2m length gives you plenty of space to store all your kitchen essentials while still giving quick and easy access.Please note: Wall fixings are not supplied. Product features Dimensions 600(H) x 1200(W) x 300(D)mm Material Stainless steel 430 Warranty 1 Year Weight 35.4kg Wall model features adjustable shelf Two sliding doors give full access Stainless steel with high rust & wear resistance High quality polished finish makes it easy to wipe clean 1.2M length gives plenty of space for kitchen essentials Wall fixings not included
The Modular Systems WCB8-0600 is a stainless steel single-door floor cabinet designed for commercial kitchen and cashier counter modular setups. Built to SUS304 grade with a 200mm splash guard, it delivers robust under-counter storage in a compact 600mm footprint, arriving pre-assembled for fast installation.
Why operators choose the WCB8-0600
SUS304 stainless steel construction — resists corrosion and withstands the demands of daily commercial kitchen use
200mm splash guard — protects the counter area and keeps the workspace clean during service
Pre-assembled — arrives ready to position straight from the box, saving installation time
51mm diameter legs — heavy-duty, adjustable-height legs for level placement on uneven floors
Cashier counter compatible — sized and designed to integrate into Modular Systems counter configurations
Specifications
Brand
Modular Systems
Model / MPN
WCB8-0600
Type
Stainless Steel Cabinet
Material
304 Stainless Steel (SUS304)
Door Count
1 (Single Door)
Splash Guard Height
200mm
Leg Diameter
51mm
Width
600mm
Depth
800mm
Height
900mm
Product Dimensions
600(W) x 800(D) x 900(H)mm
Package Dimensions
855(W) x 650(D) x 990(H)mm
Assembly
Pre-Assembled
Warranty
24 Months Parts Only
Country of Manufacture
China
Venue suitability: Suited to commercial kitchens, cafes, fast-food counters, and food service venues requiring modular counter-top or cashier configurations. Pairs with other units from the Modular Systems range to create a complete integrated counter. Browse our full range of Commercial Kitchen Cabinets or explore the complete Modular Systems collection.
Installation & delivery: Arrives pre-assembled — position, level on 51mm legs, and connect to adjacent units. No on-site fabrication required. Dispatched Australia-wide.
Frequently asked questions
What is the WCB8-0600 made from?The cabinet is constructed from SUS304 grade stainless steel throughout — both the body and the table top surface — delivering hygienic, corrosion-resistant performance in commercial environments.
Does the WCB8-0600 arrive pre-assembled?Yes. The unit ships fully pre-assembled so you can position it and start using it immediately without on-site assembly.
What is the splash guard for?The 200mm high splash guard at the rear of the unit protects the wall and adjacent surfaces from liquid splashes during food prep and service, keeping your workspace hygienic and easier to clean.
Can the WCB8-0600 be used as part of a cashier counter?Yes. The WCB8-0600 is specifically designed to suit cashier counter configurations and integrates with other units in the Modular Systems range to build a complete modular counter setup.
What warranty does the WCB8-0600 come with?The WCB8-0600 is backed by a 24 Months Parts Only warranty from Modular Systems.
Kitchen Tidy Workbench Cabinet - DTHT-1800-H
1800 mm Wide All Stainless Steel Kitchen Tidy Workbench Cabinet with Doors
All Stainless Steel Workbench Cabinets with Handy Doors to Keep Kitchens Tidy and Hide Clutter Great for Open Kitchens
600 mm Deep × 900 mm High
Pre-Assembled with All Welded Joins
Top & Frame Are 1.2 mm
SUS304 Grade (18/8)
Hairline Finish
Doors Are 0.9 mm
2 Years Parts only Warranty
Product Dimensions: 1200-1800(W) x 600(D) x 900(H)mm
The Modular Systems STHT6-1800-H is a 1800mm stainless steel pass-through workbench cabinet that provides enclosed under-bench storage accessible from both sides — ideal for open-kitchen pass-through service points and busy prep lines where organisation and hygiene are critical.
Why operators choose the STHT6-1800-H
304 stainless construction — SUS304 Grade (18/8) hairline-finish steel resists corrosion, cleans down fast, and meets commercial kitchen hygiene standards.
Pass-through sliding doors — doors on both sides enable seamless service from kitchen to pass-through window without relocating equipment.
1.2mm top & frame — heavy-gauge worksurface handles the rigour of daily prep and service loading.
Pre-assembled, all-welded joins — arrives ready to position; no on-site assembly required and no weak bolt joints.
Adjustable feet — levelling feet accommodate uneven floors and simplify cleaning underneath.
Specifications
Brand
Modular Systems
Model / MPN
STHT6-1800-H
Type
Pass-Thru Workbench Cabinet
Width
1800 mm
Depth
600 mm
Height
900 mm
Product Dimensions
1800(W) x 600(D) x 900(H)mm
Package Dimensions
1860(W) x 680(D) x 950(H)mm
Net Weight
70 kg
Material
304 Stainless Steel (SUS304, 18/8)
Top & Frame Gauge
1.2 mm
Door Gauge
0.9 mm
Finish
Hairline
Door Configuration
Sliding doors on both sides (pass-through)
Construction
Pre-assembled with all-welded joins
Warranty
2 Years Parts Only
Venue suitability: Suited to commercial kitchens, hotel food service, hospital catering, school canteens, and any venue with an open-kitchen or pass-through service arrangement where hygiene and tidy storage under the pass bench are a priority.
Browse our full range of Commercial Kitchen Cabinets or explore all Modular Systems equipment for complementary workbench, sink, and storage solutions.
Installation & delivery: Unit arrives pre-assembled — position, level the feet, and it is ready to use. No trade installation required. Dispatched Australia-wide.
Frequently asked questions
What does "pass-through" mean on this cabinet?The cabinet has sliding doors on both sides, so items can be passed through from one side to the other — useful at open-kitchen service counters or between prep and service areas.
What stainless steel grade is used?SUS304 Grade (18/8) stainless steel for both the worktop and frame, with a 1.2 mm top gauge and 0.9 mm doors.
Does this cabinet arrive pre-assembled?Yes. The STHT6-1800-H is pre-assembled with all-welded joins — no on-site assembly is needed. Position it and level the adjustable feet.
What are the overall dimensions?1800 mm wide x 600 mm deep x 900 mm high. Packed dimensions are 1860(W) x 680(D) x 950(H)mm.
What warranty applies?The STHT6-1800-H carries a 2-year parts-only warranty. For full warranty terms see our Warranty Information page.
The Modular Systems STHT-1200-H is a 1200mm stainless steel pass-through workbench cabinet that provides enclosed under-bench storage accessible from both sides — designed for open-kitchen service counters, pass-through windows, and busy prep lines where hygiene, organisation, and workflow efficiency matter.
Why operators choose the STHT-1200-H
304 stainless construction — SUS304 Grade (18/8) hairline-finish steel resists corrosion, cleans down fast, and meets commercial kitchen hygiene standards.
Pass-through sliding doors — doors on both sides allow seamless service from kitchen to pass-through window without repositioning equipment.
1.2mm top & frame gauge — heavy-gauge worksurface handles the demands of daily prep and service loading without flexing.
Comes with instruction manual & tools — everything needed to set up is included in the box.
Adjustable feet — levelling feet accommodate uneven floors and allow easy cleaning underneath.
Specifications
Brand
Modular Systems
Model / MPN
STHT-1200-H
Type
Pass-Thru Workbench Cabinet
Width
1200 mm
Depth
700 mm
Height
900 mm
Product Dimensions
1200(W) x 700(D) x 900(H)mm
Package Dimensions
1260(W) x 780(D) x 950(H)mm
Material
304 Stainless Steel (SUS304, 18/8)
Top & Frame Gauge
1.2 mm
Door Gauge
0.9 mm
Door Configuration
Sliding doors on both sides (pass-through)
Construction
Pre-assembled, all-welded joins
Includes
Instruction manual & tools
Warranty
2 Years Parts Only
Venue suitability: Suited to commercial kitchens, hotel food service, hospital catering, school canteens, and any venue with an open-kitchen or pass-through service arrangement where hygiene and tidy under-bench storage are a priority.
Browse our full range of Commercial Kitchen Cabinets or explore all Modular Systems equipment for complementary workbench, sink, and storage solutions.
Installation & delivery: Unit arrives pre-assembled — position, level the feet, and it is ready to use. No trade installation required. Dispatched Australia-wide.
Frequently asked questions
What does "pass-through" mean on this cabinet?The cabinet has sliding doors on both sides, so items can be passed through from one side to the other — useful at open-kitchen service counters or between prep and service areas.
What stainless steel grade is used?SUS304 Grade (18/8) stainless steel is used throughout the frame and worksurface, with a 1.2 mm top gauge and 0.9 mm door gauge.
Does the cabinet arrive pre-assembled?Yes. The STHT-1200-H is pre-assembled with all-welded joins. Position it, level the adjustable feet, and it is ready to use — no on-site fabrication required.
What are the overall dimensions?1200 mm wide x 700 mm deep x 900 mm high. Packed dimensions are 1260(W) x 780(D) x 950(H)mm.
What warranty applies?The STHT-1200-H carries a 2-year parts-only warranty. For full warranty terms see our Warranty Information page.
The Modular Systems DTHT-1200-H is a 1200mm stainless steel kitchen tidy workbench cabinet that combines a solid worktop with an enclosed, sliding-door storage cabinet to keep busy kitchens tidy and hide clutter.
Why operators choose the DTHT-1200-H
SUS304 (18/8) stainless construction — corrosion-resistant and easy to clean for demanding commercial kitchens.
Enclosed sliding-door cabinet — hides clutter and keeps stored items dust-free, ideal for open kitchens.
Pre-assembled, all-welded joins — arrives ready to use with a rigid, hygienic body.
1.2mm top & frame — a sturdy worktop that stands up to daily prep and equipment loads.
Hairline finish — a clean, professional appearance that resists visible scuffing.
Specifications
Brand
Modular Systems
Model / MPN
DTHT-1200-H
Type
Stainless Steel Cabinet
Material
304 Stainless Steel (18/8)
Finish
Hairline
Top & Frame Gauge
1.2mm
Door Gauge
0.9mm
Doors
2 sliding doors
Assembly
Pre-assembled, all welded joins
Product Dimensions
1200(W) x 700(D) x 900(H)mm
Packed Dimensions
1230(W) x 730(D) x 1000(H)mm
Net Weight
80 kg
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to cafes, restaurants, commercial and open kitchens that need extra concealed storage paired with a stainless work surface. It fits naturally alongside other Commercial Kitchen Cabinets and the wider Modular Systems stainless steel range.
Installation & delivery: Arrives pre-assembled and ready to position. Dispatched Australia-wide.
Frequently asked questions
What size is the DTHT-1200-H? It measures 1200(W) x 700(D) x 900(H)mm.
What grade of stainless steel is used? The cabinet is built from SUS304 (18/8) stainless steel with a hairline finish.
How thick is the worktop? The top and frame are 1.2mm, and the doors are 0.9mm.
Does it come assembled? Yes — it is pre-assembled with all-welded joins and ready to use.
What warranty does it carry? It comes with a 2 year parts-only warranty.
The Modular Systems DTHT-1200B-H is a 1200mm stainless steel kitchen tidy workbench cabinet with a rear splashback that gives you a full-height bench surface while hiding stock and clutter behind sliding doors.Why operators choose the DTHT-1200B-H
304 stainless construction — SUS304 (18/8) grade resists corrosion and stands up to commercial cleaning.
Enclosed sliding-door cabinet — keeps stock, packaging and small wares out of sight, ideal for open kitchens.
Rear splashback upstand — protects the wall and contains spills along the back edge.
Pre-assembled, all-welded joins — arrives ready to position with a rigid, hygienic frame.
1.2mm top & frame — a heavier-gauge work surface built for daily prep duty.
Specifications
Brand
Modular Systems
Model / MPN
DTHT-1200B-H
Type
Stainless Steel Cabinet
Material
304 Stainless Steel (SUS304 18/8)
Finish
Hairline
Top & frame gauge
1.2mm
Door gauge
0.9mm
Doors
Sliding
Splashback
Yes (150mm rear upstand)
Assembly
Pre-assembled, all welded joins
Product dimensions
1200(W) x 700(D) x 900+150(H)mm
Packed dimensions
1300(W) x 780(D) x 1350(H)mm
Net weight
85 kg
Warranty
2 years parts only
Venue suitability: Suited to cafes, restaurants, commercial and open-plan kitchens that need tidy, enclosed under-bench storage along a prep or service line. It works well as a workbench within our Commercial Kitchen Cabinets range, and pairs with the rest of the Modular Systems stainless steel benching family.Installation & delivery: Arrives pre-assembled and ready to position on its adjustable legs. Dispatched Australia-wide.Frequently asked questionsWhat grade of stainless steel is the DTHT-1200B-H made from? It is built from SUS304 (18/8) grade stainless steel, with a 1.2mm top and frame and 0.9mm doors.What are the dimensions of the DTHT-1200B-H? The cabinet measures 1200mm wide x 700mm deep x 900mm high, plus a 150mm rear splashback (1050mm overall height).Does it come with a splashback? Yes — it has a 150mm rear splashback upstand to protect the wall and contain spills along the back edge.Are the doors hinged or sliding? The cabinet uses sliding doors, which keep stock out of sight without needing clearance to swing open.Does the cabinet arrive assembled? Yes — it is pre-assembled with all welded joins and ready to position on delivery.
The Modular Systems SC-6-1800R-H is a 1800mm stainless steel sink cabinet with a right-hand bowl, designed to keep busy commercial kitchens tidy by combining a wash bowl, sliding-door cabinet storage and three drawers in one pre-assembled, all-welded unit.
Why operators choose the SC-6-1800R-H
SUS304 stainless construction — 1.2mm 304-grade top and frame resist corrosion and stand up to daily commercial cleaning.
Right-hand punched bowl — a 400 x 400 x 300mm bowl with 90mm drain handles prep and wash-down without a separate sink unit.
Doors and drawers in one — sliding doors plus three drawers hide clutter and keep utensils close to hand.
150mm rear splashback — protects the wall and contains splashes during busy service.
Pre-assembled, all-welded joins — arrives fully assembled with reinforced top lining, ready to position and use.
Specifications
Brand
Modular Systems
Model / MPN
SC-6-1800R-H
Type
Stainless Steel Sink Cabinet
Sink configuration
Right-hand single bowl
Bowl size
400 x 400 x 300mm
Drain
90mm diameter
Splashback
150mm rear
Material
304 Stainless Steel (1.2mm top & frame; 0.9mm doors & drawers)
Doors
Sliding doors
Drawers
3
Product dimensions
1800(W) x 600(D) x 1050(H)mm
Packed dimensions
1860(W) x 680(D) x 1230(H)mm
Net weight
144.15kg
Construction
Pre-assembled, all-welded joins; reinforced top lining
Country of manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to cafes, restaurants, commercial and institutional kitchens that need combined wash, storage and prep capacity along a single bench run.
Pair it with the rest of our Commercial Stainless Steel Sinks range, or browse the full Modular Systems stainless fabrication line-up to match it across your fit-out.
Installation & delivery: Arrives fully assembled and ready to position and connect on site. Dispatched Australia-wide.
Frequently asked questions
Which side is the sink on? The SC-6-1800R-H has the bowl on the right-hand side of the cabinet.
What size is the sink bowl? The punched bowl measures 400 x 400 x 300mm with a 90mm diameter drain.
What grade of stainless steel is used? The top and frame are 1.2mm SUS304-grade stainless steel, with 0.9mm stainless doors and drawers.
Does it come assembled? Yes — the cabinet is pre-assembled with all-welded joins and arrives fully assembled.
What warranty does it carry? The SC-6-1800R-H comes with a 2 Years Parts Only warranty.
The Modular Systems MBS118 is a double-bin mobile station built for front-of-house and back-of-house waste and utility management in commercial kitchens, cafes, and food-service venues. Constructed entirely in stainless steel with lockable castors, it provides a hygienic and mobile solution for waste segregation and storage.Why operators choose the MBS118
Mobile design — lockable castors allow repositioning across prep, service, and dishwashing zones.
Dual-bin storage — two lower storage compartments accommodate waste bins for efficient separation.
Open top shelf — flat stainless steel work shelf for plates, bus tubs, or supplies.
All-stainless construction — easy to clean, corrosion-resistant, and suited to high-humidity kitchen environments.
2-year parts warranty — backed by Modular Systems' standard commercial warranty.
Specifications
Brand
Modular Systems
Model / MPN
MBS118
Type
Stainless Steel Cabinet
Width
1180 mm
Depth
550 mm
Height
1260 mm
Product Dimensions
1180(W) x 550(D) x 1260(H) mm
Package Dimensions
1230(W) x 600(D) x 1350(H) mm
Net Weight
68 kg
Door Count
2
Material
Stainless Steel
Mobility
Castors (lockable)
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: The MBS118 is suitable for restaurants, cafes, catering operations, hotel kitchens, aged care facilities, and any food-service environment requiring a mobile, hygienic waste or utility station. Explore our full range of Commercial Kitchen Cabinets or browse complementary Commercial Stainless Steel Sinks.Installation & delivery: No installation required — unit arrives assembled on castors. Dispatched Australia-wide.Frequently asked questionsWhat is the MBS118 used for?The MBS118 is a mobile bin station designed to hold two waste bins in a lower cabinet section, with an open stainless steel shelf on top for utility storage in commercial kitchens.Does the MBS118 come with bins?The product is supplied as a mobile cabinet station. Bins are not confirmed as included — check with your supplier for inclusion details.What are the dimensions of the MBS118?The unit is 1180 mm wide x 550 mm deep x 1260 mm high. Packed dimensions are 1230(W) x 600(D) x 1350(H) mm.Is the MBS118 suitable for outdoor use?The MBS118 is designed for indoor commercial kitchen environments. While stainless steel is corrosion-resistant, it is not rated for outdoor or exposed-weather installations.What warranty does the MBS118 carry?The MBS118 is covered by a 2-year parts-only warranty from Modular Systems.
The Modular Systems SKTD6-1200 is a stainless steel bench cabinet that provides organised, hygienic storage for busy commercial kitchens. At 1200(W) x 600(D) x 900(H)mm, it combines three full-width drawers with a sliding-door cabinet below — giving operators quick-access storage at bench height alongside secure enclosed storage underneath.Why operators choose the SKTD6-1200
304-grade stainless steel — hygienic, corrosion-resistant construction suited to food-safe environments.
3 drawers — full-width drawers at bench height for utensils, small tools, and frequently used items.
Sliding-door cabinet — enclosed lower storage keeps bulkier items off the floor and out of sight.
Adjustable feet — allows levelling on uneven floors and raises the unit to the standard 900mm working height.
Easy to clean — smooth stainless surfaces wipe down quickly, minimising cross-contamination risk.
Specifications
Brand
Modular Systems
Model / MPN
SKTD6-1200
Type
Stainless Steel Bench Cabinet
Construction
304-grade Stainless Steel
Drawers
3
Doors
2 sliding doors
Product Dimensions
1200(W) x 600(D) x 900(H)mm
Packed Dimensions
1250(W) x 660(D) x 950(H)mm
Warranty
2 Years Parts Only
Venue suitability: Suited to cafes, restaurants, hotel kitchens, catering facilities, and food-processing operations requiring hygienic bench-height storage. Works equally well as a prep-bench base or an equipment support cabinet.Pair with other commercial kitchen cabinets to build out a complete modular storage solution, or explore the full Modular Systems range for benches, shelving, and sinks designed to integrate.Installation & delivery: No installation required — units arrive assembled and ready to position. Levelling feet adjust to floor height. Dispatched Australia-wide.Frequently asked questionsWhat grade of stainless steel is the SKTD6-1200 made from?The cabinet is constructed from 304-grade stainless steel throughout, which is the food-safe industry standard for commercial kitchens in Australia.How many drawers and doors does this cabinet have?The SKTD6-1200 features three drawers across the upper section and two sliding doors on the lower cabinet compartment.What are the external dimensions?The unit measures 1200mm wide, 600mm deep, and 900mm high. Packed dimensions are 1250(W) x 660(D) x 950(H)mm.Is this cabinet suitable for use in a HACCP-compliant kitchen?Yes — the 304 stainless steel construction and smooth weld-free surfaces are designed for commercial hygiene standards consistent with HACCP kitchen environments.Does the SKTD6-1200 come assembled?Yes, the cabinet arrives pre-assembled. The adjustable feet allow you to level the unit on site without tools.
MS116 Mobile cabinet with 4 Drawers and 3 ShelvesALL STAINLESS STEEL• 540 mm deep × 1400 mm high• 4 x drawers• Three levels of solid shelving 2 Years Parts only WarrantyPower:
The Modular Systems DSC-1800R-H is a stainless steel kitchen tidy cabinet that combines a double-bowl right-hand sink with enclosed storage to keep busy commercial kitchens clear of clutter. Bowls, doors and drawers are built into a single 1800mm pre-assembled unit with all-welded joins.
Why operators choose the DSC-1800R-H
304 (18/8) stainless construction — 1.2mm top and frame with a hairline finish for a hard-wearing, hygienic surface.
Two right-hand sink bowls — 450 x 450 x 300mm 'punched' bowls with a 90mm drain hole for fast prep and wash-up.
Integrated storage — sliding doors plus a bank of drawers hide clutter and free up bench space.
150mm rear splashback — protects the wall and keeps the work zone tidy.
Pre-assembled, all-welded joins — arrives ready to position with no on-site assembly.
Specifications
Brand
Modular Systems
Model / MPN
DSC-1800R-H
Type
Stainless Steel Cabinet
Sink configuration
Two right-hand bowls
Bowl size
450 x 450 x 300mm
Drain hole
90mm dia.
Material
304 (18/8) Stainless Steel
Top & frame gauge
1.2mm
Doors & drawers gauge
0.9mm
Finish
Hairline
Splashback
150mm rear
Product dimensions
1800(W) x 700(D) x 1050(H)mm
Package dimensions
1820(W) x 720(D) x 1130(H)mm
Construction
Pre-assembled, all-welded joins
Country of manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Suited to open-plan and front-of-house commercial kitchens, cafes and bars where wash-up and concealed storage need to sit in one tidy stainless unit. It is a natural fit alongside our Commercial Kitchen Cabinets range and the wider Modular Systems stainless line.
Installation & delivery: Arrives pre-assembled with all-welded joins, ready to position and connect to existing plumbing. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is used? The top and frame are 1.2mm 304 (18/8) stainless steel with a hairline finish, and the doors and drawers are 0.9mm stainless.
How many sinks does it have and which side? It has two bowls positioned on the right-hand side of the unit, each 450 x 450 x 300mm with a 90mm drain hole.
What are the overall dimensions? The cabinet is 1800mm wide, 700mm deep and 1050mm high overall, which includes a 150mm rear splashback.
Does it require assembly? No. The cabinet is supplied pre-assembled with all-welded joins, so it only needs positioning and plumbing connection.
What warranty is included? The DSC-1800R-H comes with a 2 Years Parts Only warranty.
The Modular Systems DSC-2100L-H is a stainless steel kitchen tidy cabinet that combines two left-hand punched sinks with enclosed sliding-door storage and drawers to keep a busy commercial kitchen clean and clutter-free.
Why operators choose the DSC-2100L-H
304 stainless construction — 18/8 grade with a hairline finish resists corrosion and wipes down fast in a wet kitchen.
Two left punched sinks — integrated 450 x 450 x 300mm bowls with 90mm drains handle wash-up without a separate bench.
Sliding doors and drawers — enclosed storage hides clutter and keeps utensils and stock off the floor.
Pre-assembled, all-welded joins — arrives ready to position with a hygienic, seamless build.
150mm splashback — protects the wall behind the sinks from splash and spray.
Specifications
Brand
Modular Systems
Model / MPN
DSC-2100L-H
Type
Stainless Steel Cabinet
Material
304 Stainless Steel (18/8), hairline finish
Top & frame gauge
1.2mm
Doors & drawers gauge
0.9mm
Sinks
Two left-hand punched bowls
Bowl size
450 x 450 x 300mm
Drain
90mm diameter
Splashback
150mm
Storage
Sliding doors and drawers
Product dimensions
2100(W) x 700(D) x 1050(H)mm
Packed dimensions
2160(W) x 780(D) x 1230(H)mm
Net weight
130.5kg
Country of manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Ideal for cafes, restaurants, pubs and institutional kitchens that need wash-up and enclosed storage along a single wall run, particularly open-kitchen layouts where a tidy, seamless stainless finish is on show.
Browse the rest of our Commercial Kitchen Cabinets or see the full Modular Systems range to match it with benches and sinks from the same series.
Installation & delivery: Arrives pre-assembled with all-welded joins, ready to position and connect to your plumbing. Dispatched Australia-wide.
Frequently asked questions
What grade of stainless steel is used? The DSC-2100L-H is built from 304 (18/8) stainless steel with a hairline finish.
How many sinks does it have? It has two punched sink bowls on the left, each 450 x 450 x 300mm with a 90mm drain.
How wide is the cabinet? It measures 2100mm wide x 700mm deep x 1050mm high.
What storage does it include? Sliding doors and drawers provide enclosed storage to keep the kitchen tidy and hide clutter.
Does it come assembled? Yes, it is supplied pre-assembled with all-welded joins, ready to position.
The Modular Systems SKTD-1200 is a stainless steel kitchen tidy cabinet work bench that provides orderly under-bench storage with 3 full-extension drawers across the top and 2 sliding cabinet doors below — keeping workspaces clear and clutter concealed in busy commercial kitchens.
Why operators choose the SKTD-1200
304-grade (18/8) stainless steel top — 1.2 mm SUS304 worktop resists corrosion and meets commercial hygiene standards
3 drawers for quick-access storage — full-width drawers keep utensils, wraps, and smallwares at hand without bending down
Sliding doors below — 0.9 mm stainless steel panels slide smoothly to hide bulk items and cleaning supplies
Pre-assembled with continuous welded seams — structural integrity out of the box; no on-site assembly required
Adjustable feet — stainless steel legs with adjustable levelling feet accommodate uneven floors
Specifications
Brand
Modular Systems
Model / MPN
SKTD-1200
Type
Stainless Steel Cabinet
Width
1200 mm
Depth
700 mm
Height
900 mm
Product Dimensions
1200(W) x 700(D) x 900(H) mm
Packed Dimensions
1250(W) x 760(D) x 1000(H) mm
Net Weight
66 kg
Drawers
3
Doors
2 Sliding
Top Material
1.2 mm SUS304 (18/8) Stainless Steel
Door Material
0.9 mm Stainless Steel
Assembly
Pre-assembled, continuous welded seams
Country of Manufacture
China
Warranty
2 Years Parts Only
Venue suitability: Ideal for commercial kitchens, canteens, catering operations, food preparation areas, and hospitality venues requiring organised and hygienic under-bench storage. Suits both new builds and kitchen refurbishments where a modular storage layout is required.
Browse our full range of Commercial Kitchen Cabinets or explore the complete Modular Systems brand range for compatible benches, shelving, and storage solutions.
Installation & delivery: The SKTD-1200 arrives pre-assembled and ready to position — no on-site fabrication required. Dispatched Australia-wide.
Frequently asked questions
What are the dimensions of the SKTD-1200?The SKTD-1200 measures 1200 mm wide × 700 mm deep × 900 mm high. Packed dimensions are 1250(W) × 760(D) × 1000(H) mm.
What grade of stainless steel is used?The worktop is fabricated from 1.2 mm SUS304 grade (18/8) stainless steel. The cabinet doors are 0.9 mm stainless steel.
How many drawers and doors does the SKTD-1200 have?It features 3 drawers across the top and 2 sliding doors on the cabinet section below.
Does it require assembly on delivery?No. The SKTD-1200 is supplied pre-assembled with continuous welded seams — it is ready to use once positioned and levelled.
What warranty applies?The SKTD-1200 is covered by a 2-year parts-only warranty from Modular Systems.
The Modular Systems DSC-2400L-H is a 2400mm all-stainless kitchen tidy cabinet with double left sinks, designed for busy commercial kitchens needing combined washing and under-bench storage in a single hygienic unit.
Why operators choose the DSC-2400L-H
Double punched bowls, left-positioned — two 450 x 450 x 300mm bowls free the right-hand bench for prep or service flow.
304-grade (18/8) top & frame at 1.2mm — commercial-gauge construction resists corrosion and survives daily chemical cleaning.
150mm splashback — integral rear upstand protects walls from splash and meets commercial fitout requirements without extra tiling.
Sliding doors and bank of drawers — conceals under-bench clutter with quick-access drawers and full-height door storage.
Pre-assembled, all-welded joins — arrives ready to install; no site assembly of carcass joints.
Specifications
Brand
Modular Systems
Model / MPN
DSC-2400L-H
Type
Stainless Steel Cabinet
Width
2400 mm
Depth
700 mm
Height
1050 mm (900 mm cabinet + 150 mm splashback)
Bowl Count
2 (double left sinks)
Bowl Dimensions
450 W x 450 D x 300 H mm each
Drain Hole
90 mm Ø
Top & Frame
1.2 mm SUS304 (18/8) — hairline finish
Doors & Drawers
0.9 mm stainless steel
Construction
Pre-assembled, all-welded joins
Product Dimensions
2400 W x 700 D x 1050 H mm
Package Dimensions
780 W x 2460 D x 1230 H mm
Net Weight
145.4 kg
Warranty
2 Years Parts Only
Country of Manufacture
China
Venue suitability: Suited to commercial kitchens, restaurants, cafes, hotels, caterers, aged care, education, and food-manufacturing facilities requiring a hygienic, all-in-one washing and storage station. The 2400mm span accommodates high-volume dish-up and pot-washing workflows side by side.
Browse the full range on our Commercial Stainless Steel Sinks collection, or explore all Modular Systems products to find matching benches, shelves, and preparation tables.
Installation & delivery: This unit arrives pre-assembled. Position on a level floor; connect the 90mm Ø waste to your existing drainage. No electrical connection required. Dispatched Australia-wide.
Frequently asked questions
Q: Are the sinks pre-plumbed or does a plumber need to connect the waste?A: The unit arrives fully assembled with 90mm diameter drain holes — a licensed plumber will need to connect the waste pipes to your existing drainage system on-site.
Q: Can the DSC-2400L-H be used as a freestanding unit or does it require wall-fixing?A: It is freestanding on adjustable feet. The 150mm integral splashback sits against the wall; no wall-fixing is required, though a silicone seal along the splashback is recommended for a hygienic finish.
Q: What is the gauge of the doors and drawers compared to the top?A: The top and structural frame are 1.2mm SUS304 (18/8) with a hairline finish; the doors and drawers are 0.9mm stainless steel — industry-standard for commercial fitouts.
Q: Is this unit suitable for a commercial dishwasher bench setup?A: Yes — the double left sinks make this ideal as a pre-scrape and rinse station ahead of a commercial dishwasher, while the cabinet and drawer storage keep detergents and utensils close at hand.
Q: What warranty does the DSC-2400L-H carry?A: The DSC-2400L-H is covered by a 2-year parts-only warranty through Modular Systems / F.E.D.
