Description
The Blizzard SN-81B is a self-contained, air-cooled under-bench ice maker that produces up to 80 kg of 22 mm cube ice per 24 hours and stores approximately 30 kg in its built-in bin, sized for cafes, bars and smaller venues. It draws just 4.98 A from a standard 240 V outlet and uses premium components including a US Morrill water pump and German EBM-Papst fans.
Why operators choose the SN-81B
-
Up to 80 kg ice per 24 h — a reliable daily supply for cafes, bars and takeaways
-
Approx. 30 kg on-board bin storage — enough buffer to cover typical service peaks
-
Under-bench footprint — slots neatly beneath a bench in tight back-of-house layouts
-
22 mm³ cube ice — slow-melting cubes for drinks and cold displays
-
Low 4.98 A draw — runs on a standard outlet with modest power demand
-
Premium components — Morrill pump, EBM-Papst fans and Danfoss valves for long service life
Specifications
| Brand |
Blizzard |
| Model / MPN |
SN-81B |
| Type |
Self-Contained Ice Maker |
| Ice production |
Up to 80 kg / 24h |
| Bin storage |
Approx. 30 kg |
| Ice type |
22 mm³ cube |
| Cooling | Air-cooled |
| Refrigerant |
R290 (120g) |
| Certification |
WaterMark certified |
| Power |
240 V; 610 W; 4.98 A |
| Product dimensions |
660(W) x 650(D) x 780(H)mm |
| Packed dimensions |
738(W) x 746(D) x 826(H)mm |
| Net weight | 58 kg |
| Exterior material |
Steel |
| Country of origin |
China |
| Warranty |
2 Years Parts and Labour |
Venue suitability: The SN-81B suits cafes, small bars, takeaways and offices that need a compact under-bench ice supply rather than a floor-standing machine. Its air-cooled design needs only airflow clearance; for high, sustained demand choose a larger-output unit.
Browse more Self Contained Ice Makers or view the full Blizzard range to match output to your venue.
Installation & delivery: Requires a standard 240 V outlet (4.98 A draw) plus a mains water inlet and drain; allow clearance around the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide.
Frequently asked questions
How much ice does the SN-81B make? It produces up to 80 kg of 22 mm cube ice per 24 hours, suited to cafes, small bars and takeaways.
How much ice can it store? The built-in bin holds approximately 30 kg, providing a buffer through service peaks.
Will it fit under a bench? Yes — at 660(W) x 650(D) x 780(H)mm it is designed as an under-bench unit for tight back-of-house layouts.
What power does it need? A standard 240 V outlet; the unit draws just 4.98 A, along with a mains water inlet and drain.
What warranty is included? The SN-81B is covered by a 2 Years Parts and Labour warranty.
2 Years Parts and Labour Warranty
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
6 Monthly Maintenance Program
-
Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. -
Sanitise water reservoir, distribution tubes, and bin interior. -
Clean and flush condenser coils (air-cooled units). -
Inspect condenser fan motor and blades. -
Check inlet water valve, float, and filters for correct operation. -
Verify ice thickness probe or sensor calibration.
-
Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. -
Test compressor amperage and general performance. -
Inspect water pump operation and clean pump housing. -
Check harvest cycle operation (heater or hot gas valve). -
Inspect electrical connections, relays, and contactors. -
Replace inline water filter cartridge.
SKU: SN-81B
In Stock
Open here