Self Contained Ice Makers

Produce 114kg/24hours of crystal-clear ice with more power efficiency and virtually zero impact on the environment thanks to R290 Hydrocarbon natural refrigerant. Designed to complement high-end scotch and whiskey drops, the circular GALA ice cube is slow to melt but refuses to alter the flavour or excessively water-down drinks. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: GALA – designed to protect the taste of premium beverages Suitable for very hot climates (ambient temperatures up to 43 ° C) Has 60kg of convenient built-in ice storage capacity Designed for premium cocktail bars, whisky bars, gin bars, night clubs and restaurants – 715 W x 700 D x 1149 H Comes as standard or with optional drain pump Supplied with adjustable leg kit. Castors are an optional extra Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Hospitality / Venues, Accommodation Dimensions: 715 W x 700 D x 1044 (with legs 1149 - 1199) H (mm) Ice Production (kg/24h): 114 Ice Storage (kg): 60 Ice Cube Dimensions: 39mm circumference x 35mm height Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.71 Weight (kg): 81 kW: 0.95 Current Draw (Amps): 3.96 Controller: Electronic Control Power Supply: 230 Volts a.c. 50 Hz, single phase supply Product Dimensions: 715(W) x 1044(H) x 700(D)mmOptions Available: Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-2000P is a self-contained air-cooled cube ice machine that produces up to 900 kg of solid 22 mm ice cubes per 24 hours and stores approximately 350 kg in its integrated bin. Powered by a three-phase supply and built in stainless steel, it is engineered for the highest-demand kitchens, clubs and commercial ice production.Why operators choose the SN-2000P Up to 900 kg/24h output — top-tier daily production for the busiest operations. 350 kg onboard storage — a substantial buffer for continuous service. 22 mm solid cubes — clear, slow-melting ice for premium drinks service. Three-phase power — steady supply for a high-capacity machine. Air-cooled design — no water-cooling plant required. Premium components (Morrill pump, EBM-Papst fans, Saginomiya valve) — reliability under heavy load. Specifications Brand Blizzard Model / MPN SN-2000P Type Self-Contained Cube Ice Maker Ice type Cube (22 mm) Ice production Up to 900 kg / 24h Storage bin capacity Approx. 350 kg Cooling Air-cooled External material Stainless steel Power 380V / 50Hz; 4000W; three-phase + neutral Product dimensions 1262(W) x 965(D) x 2057(H) mm Packed dimensions 1320(W) x 910(D) x 2050(H) mm Shipping weight 666 kg Warranty 2 years parts and labour Venue suitability: The SN-2000P suits large clubs, hotels, stadiums, event caterers and businesses supplying bagged ice, where daily demand runs into hundreds of kilograms. Its up-to-900 kg output and 350 kg bin cover the heaviest workloads, but it needs a three-phase power supply and professional installation, so it is not suited to sites limited to single-phase power.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration for your venue.Installation & delivery: The SN-2000P requires a three-phase power supply installed by a licensed electrician, plus a water connection, drain and ventilation clearance for air cooling. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-2000P make per day? It produces up to 900 kg of cube ice every 24 hours under normal operating conditions.What type of ice does it make? It makes solid 22 mm cube ice — clear and slow-melting, suited to premium drinks and bulk supply.How much ice can it store? The integrated bin holds approximately 350 kg.What power supply does it need? It runs on a three-phase supply and must be connected by a licensed electrician — it is not a plug-in single-phase unit.Is the SN-2000P air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the machine.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-128F is a self-contained granular ice maker that produces up to 120 kg of soft granular ice per 24 hours and holds 50 kg in its integrated storage bin. Air-cooled and finished in stainless steel, it is built for cafes, bars and healthcare kitchens that need a steady supply of chewable ice from a compact footprint.Why operators choose the SN-128F 120 kg/24h granular output — reliable daily volume for busy service without oversizing the plant. 50 kg onboard storage bin — buffers peak demand so ice is ready when orders spike. Soft, high-hardness granular ice — easy to chew and ideal for cold drinks, seafood displays and healthcare use. Air-cooled stainless steel build — simple to install and wipe down in a commercial kitchen. German EBM-Papst fan and Danfoss expansion valve — quality refrigeration components for consistent running. Modular, easy-to-move design — straightforward to position and service. Specifications Brand Blizzard Model / MPN SN-128F Type Self-Contained Granular Ice Maker Ice type Granular Ice production 120 kg / 24h Storage bin capacity 50 kg Cooling Air-cooled External material Stainless steel Power 220-240V / 50Hz; 710W; 10A Product dimensions 650(W) x 660(D) x 1050(H) mm Packed dimensions 738(W) x 746(D) x 1026(H) mm Net weight 79 kg Shipping weight 142 kg Warranty 2 years parts and labour Venue suitability: The SN-128F suits cafes, cocktail bars, aged-care and healthcare kitchens, and seafood or salad displays where soft, chewable granular ice is preferred over hard cubes. Its 120 kg daily output and 50 kg bin fit small-to-medium venues; high-turnover sites pulling ice all day should size up to the 250 kg SN-258F.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration to match the rest of your kitchen.Installation & delivery: The SN-128F runs on a standard 240V 10A power point and needs a nearby water supply and drain plus clearance for air-cooled ventilation. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-128F make per day? It produces up to 120 kg of granular ice every 24 hours under normal operating conditions.How much ice can it store? The integrated bin holds approximately 50 kg, so ice is buffered for busy periods.What type of ice does it make? It makes soft, high-hardness granular (nugget-style) ice that is easy to chew and well suited to drinks, displays and healthcare settings.Is the SN-128F air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the unit for reliable performance.What power supply does it need? It connects to a standard single-phase 240V 10A power point.What warranty does it come with? The SN-128F is covered by a 2-year parts and labour warranty, subject to regular maintenance of the water filter and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-258F is a self-contained granular ice maker that produces up to 250 kg of soft granular ice per 24 hours and stores 125 kg in its built-in bin. Air-cooled and finished in stainless steel, it is built for busy bars, healthcare kitchens and seafood or buffet displays that get through large volumes of chewable ice.Why operators choose the SN-258F 250 kg/24h granular output — high daily volume for demanding, high-turnover venues. 125 kg storage bin — a generous buffer for extended peak service. Soft, high-hardness granular ice — easy to chew and ideal for drinks, displays and healthcare use. Air-cooled stainless steel build — straightforward to install and keep clean. German EBM-Papst fan and Danfoss expansion valve — quality refrigeration for consistent output. Modular, easy-to-move design — simple positioning and servicing. Specifications Brand Blizzard Model / MPN SN-258F Type Self-Contained Granular Ice Maker Ice type Granular Ice production 250 kg / 24h Storage bin capacity 125 kg Cooling Air-cooled External material Stainless steel Power 220-240V / 50Hz; 1180W; 10A Product dimensions 560(W) x 860(D) x 1795(H) mm Packed dimensions 785(W) x 890(D) x 1870(H) mm Shipping weight 327 kg Warranty 2 years parts and labour Venue suitability: The SN-258F suits high-volume bars, aged-care and healthcare kitchens, and seafood or buffet displays where soft, chewable granular ice is preferred. Its 250 kg daily output and 125 kg bin serve larger sites; smaller venues with lighter demand can consider the 120 kg SN-128F instead.Compare it with the full Self Contained Ice Makers range, or browse more Blizzard refrigeration to match your kitchen.Installation & delivery: The SN-258F runs on a standard 240V 10A power point and needs a nearby water supply and drain plus clearance for air-cooled ventilation. It is backed by a 2-year parts and labour warranty and dispatched Australia-wide.Frequently asked questionsHow much ice does the Blizzard SN-258F make per day? It produces up to 250 kg of granular ice every 24 hours under normal operating conditions.How much ice can it store? The integrated bin holds 125 kg, buffering supply through busy periods.What type of ice does it make? It makes soft, high-hardness granular (nugget-style) ice that is easy to chew and well suited to drinks, displays and healthcare settings.Is the SN-258F air-cooled or water-cooled? It is air-cooled, so it needs adequate ventilation clearance around the unit.What power supply does it need? It connects to a standard single-phase 240V 10A power point.What warranty is included? It comes with a 2-year parts and labour warranty, subject to regular water-filter maintenance and descaling. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Need a quality compact ice cube maker that punches well above its weight? The tiny NDP20 now uses R290 Hydrocarbon natural refrigerant so you can produce 23kg/24hours of crystal-clear ALFA ice cubes with more power efficiency and virtually zero impact on the environment. Perfect for small bars and cafes. Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment Make crystal clear ice every time using a patented spray system Ice type: ALFA - maximizes productivity, cools quickly and melt slowly in the glass Suitable for very hot climates (ambient temperatures up to 43°C) Has 6kg of convenient built in ice storage capacity Designed for small cafes, bars, pubs and restaurants - 350 W x 475 D x 593 H (mm) Easily built into joinery with front and rear-facing ventilation (100mm clearance required) Fitted with 6mm feet Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Hospitality / Venues, Accommodation, Schools, Bakery / Pastry Dimensions: 350 W x 475 D x 593 (+6mm feet) H (mm) Ice Production (kg/24h): 23 Ice Storage (kg): 6 Ice Cube Dimensions: 36 W x 26 D x 23 H (mm) Temperature Range: 10°C to 43°C Refrigerant: R290 (natural refrigerant) Door Type: Solid Material: AISI 304 stainless steel body Total Floor Area (m2): 0.17 Weight (kg): 32 kW: 0.27 Current Draw (Amps): 1.41 Noise Measurement (dB): 57 Controller: Electronic control Power Supply: 230 Volts a.c. 50 Hz, single phase supply Product Dimensions: 350(W) x 599(H) x 475(D)mmOptions Available: Replacement filter cartridge SXX11696 Water filter kit SXX11695 Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Produce refreshing ice almost anywhere with the stylish and reliable Polar C-Series countertop ice machine. Incredibly easy to use and with little training required, simply fill the internal water reservoir, and select the size of cube required. The Polar gets to work fast, producing ice every 6-12 minutes (depending on ice size). As there's no mains water or drain connection required, making the Polar countertop ice maker highly portable and perfect for mobile catering or as a backup ice machine.This compact design not only helps to produce small amounts of ice quickly, making the machine perfect for adding extra capacity, but also means the unit can easily be packed away when not in use, all without taking up too much space. Once service is over the ice machine is simple to drain down and clean, with many parts easily removed for maximum hygiene. Product features Dimensions 380(H) x 305(W) x 380(D)mm Material ABS Refrigerant R600a Voltage 230V Weight 13.5kg 11kgs/24hrs Not suitable for use in outdoor & mobile environments including catering vehicles Bullet ice Fan Cooled Size selection allows you to choose ice that best suits your drinks menu Manual Fill Ice is dispensed into the 1kg capacity bin ready for immediate use Lid helps to maintain temperature and keep ice free from contaminants Supplied with food-safe ice scoop All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Hoshizaki KM-40C-HC is a self-contained crescent ice maker that produces up to 41 kg of crystal-clear crescent ice over 24 hours with an integrated 16 kg storage bin, built for cafes, bars and small commercial kitchens where bench space is tight.Why operators choose the KM-40C-HC Slow-melting crescent cubes — exceptionally hard, crystal-clear individual cubes with no bridging, ideal for drinks service Enlarged bonded evaporator — double-sided stainless evaporator accelerates harvest cycles for more ice in fewer cycles Natural-refrigerant air cooling — R290 hydrocarbon charge and front slide-in air filter keep efficiency high and servicing simple All-stainless under-bench build — durable stainless exterior on a slimline 452 mm-wide footprint that flush-mounts to a rear wall Hygiene-friendly design — snap-in water tank removes easily for sanitisation, with LED indicators and audible alarms Specifications Brand Hoshizaki Model / MPN KM-40C-HC Type Self-Contained Ice Maker Ice Shape Crescent Ice Production (per 24h) Approx. 41 kg @ 21°C air / 15°C water; approx. 33 kg @ 32°C air / 21°C water Max Storage Capacity Approx. 16 kg Freeze Cycle Time Approx. 23 min Ice Per Cycle Approx. 0.71 kg / 80 pcs Cooling Air-cooled Refrigerant R290 / 68 g Power Supply 1 Phase 220-240V 50Hz, 10A plug Power Consumption Approx. 209 W Amperage Running 1.4A / Starting 7.7A Operating Conditions Ambient 7-38°C; water supply 7-32°C Product Dimensions 452(W) x 610(D) x 988(H)mm Packed Dimensions 502(W) x 660(D) x 1038(H)mm Net Weight 39 kg Packed Weight 49 kg Material Stainless Steel Warranty 3yr parts & labour (unit), 5yr parts & labour (evaporator), 5yr parts (compressor) Venue suitability: The compact 41 kg daily output and 16 kg bin suit cafes, espresso bars, small restaurants, wine bars and offices that need reliable crescent ice without a full modular machine. Browse the full range of Self Contained Ice Makers or see every model from Hoshizaki to compare output and storage.Installation & delivery: Plugs into a standard single-phase 10A outlet and flush-mounts to a rear wall; requires a mains water supply and drainage. Dispatched Australia-wide.Frequently asked questionsHow much ice does the KM-40C-HC make per day? It produces approximately 41 kg of crescent ice per 24 hours at 21°C air / 15°C water temperatures, and around 33 kg per 24 hours in warmer 32°C conditions.How much ice can it store? The integrated storage bin holds approximately 16 kg of ice.Is it air-cooled or water-cooled? The KM-40C-HC is air-cooled, drawing air through a front slide-in filter, so it does not require a separate water-cooling connection.What refrigerant does it use? It uses R290, a natural hydrocarbon refrigerant, with a 68 g charge.What power supply does it need? It runs on a single-phase 220-240V 50Hz supply via a standard 10A plug, drawing approximately 209 W.

Read more less

This Hoshizaki KM-140C-HC is a self-contained Crescent Edge ice maker producing up to 130 kg of high-quality Crescent Edge Ice per 24 hours, meeting even the strictest hygiene requirements and suitable for all operational requirements and kitchen measurements. The KM Edge range has an enlarged, bonded evaporator surface. Accelerating harvest cycles, the technology behind the KM Edge range will help you to increase your serving capacity instantly. More ice in less amount of time.Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit. Production Capacity per 24hours Approx. 138kg @ 10°C Air temp; 10°C WaterApprox. 130kg @ 21°C Air temp; 15°C WaterApprox. 115kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 55kg Freeze Cycle Time Approx. 21min Ice Production Per cycle Approx. 1.87kg / 208pcs Width 630mm Depth 719mm Height 1,333mm Weight Net 69kg Packed Weight 81Kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/10 Amp Plug Amperage Running: 3.9A Starting: 18.6A Refrigerant Charge R290/110g Operating Conditions Ambient Temp.: 7-38°CWater Supply Temp.: 7-32°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6% Additional Parts 87000105 High capacity Water Filter System87000107 450mm Replacement Cartridge87000149 Water Filter System & Guage78000098 Drain pump81000116 Stainless Steel Hose95001013 Adjustable Leg Product Dimensions: 630(W) x 719(D) x 1333(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

This Hoshizaki KM-60C-HC is a self-contained Crescent Edge ice maker producing up to 52 kg of high-quality Crescent Edge Ice per 24 hours, meeting even the strictest hygiene requirements and suitable for all operational requirements and kitchen measurements. The KM Edge range has an enlarged, bonded evaporator surface. Accelerating harvest cycles, the technology behind the KM Edge range will help you to increase your serving capacity instantly. More ice in less amount of time. Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit. Production Capacity per 24hours Approx. 60kg @ 10°C Air temp; 10°C WaterApprox. 52kg @ 21°C Air temp; 15°C WaterApprox. 37kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 23kg Freeze Cycle Time Approx. 26min Ice Production Per cycle Approx. 0.96kg / 110pcs Width 605mm Depth 610mm Height 988mm Weight Net 45kg Packed Weight 57kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10Amp Plug Amperage Running: 1.6A Starting: 8.5A Refrigerant Charge R290/90g Operating Conditions Ambient Temp.: 7-38°CWater Supply Temp.: 7-32°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6% Additional Parts 87000104 Low capacity Water Filter System87000106 320mm Replacement Cartridge87000148 Water Filter Kit & Guage87000146 Water Filter78000098 Drain pump78000099 Drain pump81000116 Stainless Steel Hose95001013 Adjustable Leg Product Dimensions: 605(W) x 610(D) x 988(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

This Hoshizaki KM-80C-HC is a self-contained Crescent Edge ice maker producing up to 75 kg of high-quality Crescent Edge Ice per 24 hours, meeting even the strictest hygiene requirements and suitable for all operational requirements and kitchen measurements. The KM Edge range has an enlarged, bonded evaporator surface. Accelerating harvest cycles, the technology behind the KM Edge range will help you to increase your serving capacity instantly. More ice in less amount of time.Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit. Production Capacity per 24hours Approx. 75kg @ 10°C Air temp; 10°C WaterApprox. 68kg @ 21°C Air temp; 15°C WaterApprox. 55kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 34kg Freeze Cycle Time Approx. 23min Ice Production Per cycle Approx. 1.15kg / 130pcs Width 605mm Depth 712mm Height 988mm Weight Net 50kg Packed Weight 63kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10Amp Plug Amperage Running: 2.1A Starting: 12.5A Refrigerant Charge R290/147g Operating Conditions Ambient Temp.: 7-38°CWater Supply Temp.: 7-32°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6% Additional Parts 87000104 Low capacity Water Filter System87000106 320mm Replacement Cartridge87000148 Water Filter Kit & Guage87000146 Water Filter78000098 Drain pump78000099 Drain pump81000116 Stainless Steel Hose95001013 Adjustable Leg Product Dimensions: 605(W) x 712(D) x 988(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less