Description
20 Litre Insulated Drink Dispenser with Spigot - CPWK020-5
Exterior: 460mmW×300D×500H
Interior: 320mmW×200D×320H
Made from high quality long-life
Food Grade Polyethylene (PE)
• Alkaline resistant • shock resistant
• Safe use range -40ºC to 80ºC
• Easy to clean
• Double thickness PE structure filled with Polyurethane Foam
• Door gaskets to minimise heat/cold loss
• Pressure relief valve for easy opening
Our carriers are attractive, durable, practically unbreakable & will leave no taste or odour in foods
12 Months Parts only Warranty
Power:
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
6 Monthly Maintenance Program
-
Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. -
Sanitise water reservoir, distribution tubes, and bin interior. -
Clean and flush condenser coils (air-cooled units). -
Inspect condenser fan motor and blades. -
Check inlet water valve, float, and filters for correct operation. -
Verify ice thickness probe or sensor calibration.
-
Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. -
Test compressor amperage and general performance. -
Inspect water pump operation and clean pump housing. -
Check harvest cycle operation (heater or hot gas valve). -
Inspect electrical connections, relays, and contactors. -
Replace inline water filter cartridge.
Open here