Description
The Thermaster PG210FE-XG is a hot bain marie food display unit that holds six full-size 1/1 GN pans at serving temperature, offering wet or dry holding modes beneath a full-width tempered glass canopy with clear sliding serving doors — ideal for buffet lines, food courts, and high-volume serveries.
Why operators choose the PG210FE-XG
-
Wet and dry operating modes — flexible for wet-holding proteins and gravies or dry-holding baked goods and fried items in the same unit
-
Holds six 1/1 GN pans up to 150mm deep — covers a full serving line in a single 2100mm footprint with perforated pan dividers included
-
35–85°C temperature range — wide band suits everything from gentle holding to active hot display; analogue control with temperature-reach indicator light
-
Tempered glass canopy with halogen heating lamp — keeps displayed food warm at the pass while keeping it visible and accessible to staff
-
Ambient storage cabinet below — two sliding solid doors beneath the bain marie top provide additional dry-storage space on the same footprint
-
Castors for flexible positioning — reposition across the servery floor without lifting; streamlined exterior simplifies end-of-service cleaning
Specifications
| Brand |
Thermaster |
| Model / MPN |
PG210FE-XG |
| Type |
Hot Bain Marie Food Display |
| GN Pan Configuration |
6 x 1/1 GN (pans up to 150mm deep) |
| Operating Modes |
Wet and Dry Bain Marie |
| Temperature Range |
35–85°C |
| Canopy |
Tempered glass with halogen heating lamp (separate switch) |
| Serving Doors |
Clear sliding glass doors |
| Storage Cabinet |
2 sliding solid doors (ambient, under bain marie top) |
| Power |
240V |
| Power Type |
Electric |
| Material |
Stainless Steel |
| Product Dimensions |
2140(W) x 790(D) x 1280(H)mm |
| Package Dimensions |
840(W) x 2230(D) x 1370(H)mm |
| Net Weight |
175 kg |
| Included |
Perforated pan divider (GN pans not included; pans and dividers must be fitted at all times) |
| Country of Manufacture |
China |
| Warranty |
2 Years Parts & Labour + 2 Years Parts Only with Product Registration (48 months total) |
Venue suitability: Suited to hotel buffets, food courts, hospital and aged-care cafeterias, staff canteens, event caterers, and any high-volume servery requiring a wide hot-holding display. Note: this is a hot-holding unit only — it is not designed to heat cold product from raw; pre-heat food to serving temperature before loading. Browse the full range of Hot Bain Marie display units or explore more Thermaster commercial equipment.
Installation & delivery: Requires a standard 240V single-phase power outlet. Mount on included castors for flexible floor positioning. Ensure adequate power-cord clearance at the front-left. GN pans and dividers must be fitted at all times during operation. Dispatched Australia-wide.
Frequently asked questions
Q: What size GN pans does the PG210FE-XG accept?
A: The PG210FE-XG fits six full-size 1/1 GN pans up to 150mm deep. GN pans and dividers are not included and must remain in place during operation.
Q: Can the PG210FE-XG operate in both wet and dry mode?
A: Yes — the unit is designed for both wet bain marie (heating elements submerged in water for moist holding) and dry bain marie operation, with convective thermal air-flow and a humidity bench to support both modes.
Q: What temperature range does the PG210FE-XG maintain?
A: The analogue thermostat controls temperatures from 35°C to 85°C. A temperature-reach indicator light confirms when the set point is achieved.
Q: What power supply does the PG210FE-XG require?
A: The unit runs on a standard Australian 240V single-phase supply. No three-phase wiring is required.
Q: What is the warranty on the PG210FE-XG?
A: The Thermaster PG210FE-XG carries a 2 Years Parts & Labour warranty plus an additional 2 Years Parts Only warranty upon product registration — 4 years total coverage.
SKU: PG210FE-XG
Out of Stock