A cold bain marie is a refrigerated food display unit that holds salads, cold meats, dairy and prepared ingredients at safe chilled temperature while keeping them on show through service. This range covers refrigerated-well units and glass-top display models, sized in standard 1/1 GN pan configurations, for cafés, delis, sandwich bars, buffets and self-serve venues across Australia. Need heated holding instead? Browse our hot bain marie range, or for fully refrigerated cabinets see salad bar fridges.
Who cold bain maries are for
If you serve chilled food from the counter, a refrigerated bain marie keeps it both safe and selling. Sandwich shops and delis run glass-top models so customers choose fillings by eye; buffets, RSLs and function venues set up self-serve salad and dessert stations; cafés and pizzerias use open-well units beside the prep bench for fast back-of-house access. Anywhere cold ingredients sit out through a long trading day, a chilled bain marie does the job an unrefrigerated display can't — holding product below the temperature where food-safety risk starts.
What's in scope
Refrigerated-well bain maries
Open-top units with a chilled well that holds GN pans of salad, garnishes, deli fillings or cold sauces. Staff reach straight in, so they suit fast prep and assembly lines where speed matters more than customer-facing display.
Glass-top display bain maries
The same refrigerated base with a glass canopy or curved-glass front over the pans — protecting food from the room while merchandising it to the customer. The pick for counter-front service where the display sells the product.
Saladettes and cold prep counters
Bench-height units that pair a chilled pan rail with a refrigerated cabinet below, so a venue preps and stores in one footprint. Common in pizza, sandwich and burger kitchens that build to order.
Cold salad and noodle bars
Larger multi-pan units built for buffet and self-serve formats, holding a wide spread of chilled lines across several 1/1 GN pans at once.
How to choose a cold bain marie in three steps
Picking the right unit comes down to three questions, in order.
Step 1 — How many pans do you need?
Cold bain maries are sized by how many gastronorm pans the well holds — most quote a 1/1 GN equivalent (commonly two to six pans wide). Count the chilled lines you serve at peak, not your full menu, and choose a unit that holds them with a little room to swap pans during service.
Step 2 — Refrigerated well or ambient display?
This range is refrigerated — the well is actively chilled to hold cold food safely through hours of service, which an ambient (unchilled) display can't do. If your product is cooked and served hot, you want a hot bain marie instead; if it's chilled and needs to stay chilled, a refrigerated unit is the only compliant choice for extended holding.
Step 3 — Countertop or drop-in?
A countertop or freestanding unit sits on an existing bench and plugs into a standard outlet — the flexible option that moves if your layout changes. A drop-in model is built into a purpose-cut counter for a flush, integrated servery line. Measure your bench space and confirm the power and clearance before you commit to a built-in.
A cold bain marie is a refrigerated display and holding unit that keeps salads, cold meats, dairy and prepared ingredients chilled and safe while presenting them at the counter. Unlike a hot bain marie, which heats cooked food, a cold version uses an actively refrigerated well to hold product in the safe chilled zone throughout service. Glass-top models add a canopy so the food merchandises itself to customers.
What's the difference between a cold bain marie and a hot bain marie?
A cold bain marie keeps chilled food cold; a hot bain marie keeps cooked food hot. The cold version uses a refrigerated well to hold salads, dairy and cold ingredients at a safe low temperature, while the hot version uses heated water or dry heat to hold soups, curries and cooked dishes above 60°C. They're not interchangeable — match the unit to whether your product is served chilled or hot.
What temperature should a cold bain marie hold?
Australian food-safety guidance keeps cold food at or below 5°C to stay out of the temperature danger zone, and refrigerated bain maries are built to hold their wells in that chilled range through extended trading. Load the unit with food that's already properly chilled — like a fridge, it's designed to maintain temperature, not pull warm product down quickly.
What's a refrigerated bain marie versus a chilled display?
They describe the same idea — a refrigerated bain marie is a chilled, often glass-topped display that holds cold food in GN pans at the counter. The "bain marie" name carries over from the heated version because the format is the same: a row of standard pans set into a temperature-controlled well, just refrigerated rather than heated.
What size cold bain marie do I need?
Size by pan count. Cold bain maries are measured in gastronorm (GN) pans — typically two to six 1/1 pans across. Count the chilled lines you run at your busiest service and pick a unit that holds them with a spare pan or two for swapping during a rush. A two- or three-pan unit suits most café counters; buffets and large self-serve stations need the wider salad and noodle bar formats.
Can a cold bain marie sit on a countertop?
Yes. Many models are countertop or freestanding units that sit on an existing bench and run from a standard power outlet, so they rarely need electrical work. Drop-in models are built into a purpose-cut counter for a flush servery line — that's the option to plan around if you want an integrated finish. Check the unit's dimensions and clearance against your bench before ordering.
Are cold bain maries suitable for self-serve buffets?
They're one of the standard choices for it. Glass-top and sneeze-guarded models protect food in customer-facing self-serve settings while keeping it chilled, and wider salad and noodle bar units hold enough pans for a full buffet spread. For a fully enclosed alternative, a salad bar fridge gives you more capacity behind glass doors.
Do you deliver cold bain maries across Australia?
Yes. Commercial Kitchen Store ships nationwide, and our Australian-based team is on 1300 111 901 if you need help sizing a unit to your counter. For cover details, see our warranty and service information.
The FED-X XS900GC is a two-door refrigerated cold bain marie saladette designed for high-volume salad, pizza, and deli prep stations. Featuring a square glass canopy with an ambient middle display shelf, it keeps ingredients chilled at +2 to +8°C while maintaining full visibility for operators. Pans and lids are sold separately.
Why operators choose the XS900GC
Glass top with ambient middle shelf — keeps ingredients visible and accessible without breaking the cold chain below
Fan-assisted cooling with Embraco/Secop compressor — consistent temperature across the prep zone with reliable, repairable refrigeration
Dixell digital controller — precise temperature management with easy digital interface for kitchen staff
All-stainless interior & exterior with rounded corners — no crevices to trap food, easy hosing down during clean
Integrated HDPE cutting board — food-safe high-density polyethylene, included and removable for separate sanitising
Replaceable magnetic door seals — no service call needed for worn seals; replacement is a simple operator task
Heavy duty castors — reposition or pull out for under-unit cleaning without tools
Specifications
Brand
FED-X
Model / MPN
XS900GC
Type
Cold Bain Marie / Saladette
Net Capacity
180 L
Gross Capacity
240 L
Doors
2 × Hinged
Temperature Range
+2 to +8°C
Max Ambient
38°C at 60% RH
Cooling System
Fan-Assisted
Refrigerant
R600A
Compressor
Embraco / Secop
Controller
Dixell Digital
Power
240V, 50Hz, 1.2A, 170W
Power Type
Electric — Single Phase
External Dimensions
903(W) × 700(D) × 1310(H)mm
Internal Dimensions
830 x 595 x 455mm
Packed Dimensions
930(W) × 730(D) × 1050(H)mm
Net Weight
81 kg
Shelf Load Capacity
40 kg per shelf
Material
Stainless Steel
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Ideal for cafes, delis, sandwich bars, pizza restaurants, sushi counters, and catering operations where fresh ingredients need to stay chilled and accessible throughout service. The glass canopy suits front-of-house or semi-open kitchen layouts. Explore the full range in our Cold Bain Maries collection or browse all FED-X refrigeration equipment.
For tips on keeping your prep fridge performing at its best, see our guide: How to Maximise Freshness with a Commercial Salad Bar Fridge.
Installation & delivery: The XS900GC ships fully assembled on heavy-duty castors — position and plug in. Ensure adequate clearance at the rear for condenser airflow. All standard electrical hookup (240V single phase). Warranty claims and registration via the FED-X Warranty page. Dispatched Australia-wide.
Frequently asked questions
What is the net capacity of the XS900GC?The XS900GC has a net usable capacity of 180 L (gross 240 L). The net figure reflects the actual chilled storage volume available for GN pans and ingredients.
Are GN pans included?No — the XS900GC is supplied without pans or lids. Pan covers must be used during operation to maintain correct temperature. The unit is compatible with standard GN 1/1, 1/2, 1/3, and 1/6 configurations in the open prep top.
What refrigerant does the XS900GC use?The unit uses R600A (isobutane), a low-GWP natural refrigerant. It is serviced by any licensed refrigeration technician in Australia.
What is the warranty on the XS900GC?FED-X provides 2 Years Parts & Labour plus 2 Years Parts Only — 4 years total — when the product is registered within 14 days of invoice. Registration must be completed through FED-X to activate the extended term.
Can this unit operate in a hot kitchen environment?Yes — the XS900GC is rated to a maximum ambient temperature of 38°C at 60% relative humidity, which covers most commercial kitchen conditions in Australia.
FED-X Two Door Salad Prep Fridge with Curve Glass Top - XTHP2100SALGC Net Capacity: 314L Cooling System: Fan forced cooling Temperature range: +2~+8°C Compressor: Cubigel Controller: Dixell Refrigerant: R290 Ambient Temperature: 32°C RH: 60% Stainless steel interior and exterior with rounded corners for easy cleaning Open top suitable for multiple pan configurations (Pans and lids are not included) Replaceable magnetic door seals User friendly Digital controls Integrated cutting board made from high-density polyethylene Heavy duty castors with front wheel brakes Pan and pan cover must be used to ensure correct operating temperature Weight loading per shelf: 40kg Dimensions (internal): 799mm W x 580mm D x 564mm H 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 215W
Specifications
Capacity: 314L
Width: 1360mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XS903GC is a refrigerated cold bain marie (salad and sandwich prep counter) that holds prepared ingredients in GN pans at safe service temperature under a glass canopy while keeping a chilled storage cabinet beneath.
Why operators choose the XS903GC
Glass canopy prep top — an open GN-pan top under a glass canopy with an ambient middle shelf keeps fillings visible and within reach during service.
Three-door chilled base — 218 L net of refrigerated storage under the prep top keeps back-up stock cold without a second fridge.
Hydrocarbon efficiency — natural R290 refrigerant with an Embraco/Secop compressor and Dixell digital control holds +2 to +8°C.
Built to clean — stainless steel interior and exterior with rounded corners, replaceable magnetic door seals and a high-density polyethylene cutting board.
Service-ready build — heavy-duty castors for repositioning and an integrated HDPE cutting board for on-counter prep.
Specifications
Brand
FED-X
Model / MPN
XS903GC
Type
Cold Bain Marie
Doors
3 hinged
Net capacity
218 L (368 L gross)
Temperature range
+2 to +8°C
Cooling system
Fan-assisted
Refrigerant
R290
Compressor
Embraco/Secop
Controller
Dixell digital
Max ambient
38°C, 60% RH
Construction
Stainless steel interior and exterior
Power
240V, 240W / 1.6A
External dimensions
1365(W) x 700(D) x 1310(H)mm
Internal dimensions
1295 x 595 x 455mm
Packed dimensions
1390(W) x 730(D) x 1050(H)mm
Net weight
104 kg
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: Suited to cafes, sandwich bars, takeaway shops and busy commercial kitchens that build made-to-order salads, sandwiches and wraps from chilled GN-pan ingredients. Browse the full range of Cold Bain Maries or see more refrigeration from FED-X.
Installation & delivery: Arrives on heavy-duty castors ready to position and plug into a standard 240V outlet; pans and lids are not included and must be fitted for correct operating temperature. Dispatched Australia-wide.
Frequently asked questions
What is the net storage capacity? The chilled base cabinet holds 218 litres of usable storage (368 litres gross), under the GN-pan prep top.
What temperature does it hold? It operates between +2 and +8°C, suitable for chilled salad and sandwich fillings.
Which refrigerant does it use? It runs on natural hydrocarbon R290 refrigerant with an Embraco/Secop compressor and Dixell digital control.
Are GN pans included? No — pans and lids are not included and must be fitted, as a pan and cover are required to maintain correct operating temperature.
What warranty does it carry? It is covered by 2 years parts and labour plus a further 2 years parts only when the product is registered within 14 days of invoice.
The Atosa Three Doors Sliding Lid Saladette is a compact and well-rounded unit ideal for catering and busy kitchens. Engineered for optimal performance in hot environments, this saladette fits standard GN pans and lids (not included) and has a stainless steel top with marble prep area, ideal for pizza. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and includes white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility. Please note: this unit requires manual defrosting. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 380L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty stainless steel top
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system take note
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
GN I pans & Lids not included
Net Weight(Kg)90
Dimensions: 1365mmW x 700D x 888H
Power Requirements: 220V 50Hz; 270W; 2A
Dimensions: 1380(W) x 700(D) x 950(H)mmWarranty: 48 Months Parts & 24 Labour
The Atosa Pizzatable Saladette is a compact and heavy duty unit ideal for catering and busy kitchens, designed for preparing and topping pizzas. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel top and spacious marble prep area, ideal for pizza. The lower compartment offers insulated cold storage with 3 self-closing doors, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility.
Please note: the unit features a manual defrosting system. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 380L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Comes with square glass sneeze guard canopy
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
3 Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
ESL 3864 can fit 7 x 1/3 GN Pans
GN pans & Lids are not included
Net Weight 170Kg
Dimensions: 1365mmW x 700D x 970H
Power Requirements: 220V 50Hz; 300W; 2A
Dimensions: 1365(W) x 700(D) x 1168(H)mmWarranty: 48 Months Parts & 24 Labour
The Modular Systems YC-3 is a refrigerated cold bain marie food service cart designed to hold pre-chilled food at a safe 2–5°C during service. It accommodates 4 × 1/2 GN and 1 × 1/1 GN pans (max. pan height 150 mm) and moves easily on four castors (two with brake), making it ideal for buffet lines, cafeteria counters, and mobile service stations.Why operators choose the Modular Systems YC-3
Safe cold holding at 2–5°C — keeps pre-chilled food within the safe serving zone throughout service.
Versatile GN pan configuration — accepts 4 × 1/2 GN and 1 × 1/1 GN pans (max. 150 mm deep) to suit a variety of menu items.
Mobile and manoeuvrable — four castors including two braked wheels for safe positioning on the floor.
All stainless steel construction — robust, hygienic, and easy to clean for commercial kitchen demands.
Low power draw — 240 V / 500 W (0.5 kW) single phase; plugs into a standard GPO.
Specifications
Brand
Modular Systems
Model / MPN
YC-3
Type
Cold Bain Marie / Refrigerated Food Service Cart
Pan Configuration
4 × 1/2 GN + 1 × 1/1 GN (max. pan height 150 mm)
Temperature Range
2–5°C (cold food holding only — not designed to cool product)
Power
240 V; 500 W (0.5 kW) — Single Phase
Power Type
Electric
Construction
Stainless Steel
Width
1060 mm
Depth
668 mm
Height
900 mm
Product Dimensions
1060(W) × 668(D) × 900(H) mm
Packed Dimensions
1330(W) × 770(D) × 980(H) mm
Net Weight
83 kg (per FED; store lists 106 kg — verify)
Mobility
4 castors (2 with brake)
Warranty
1 Year Parts and Labour
Country of Manufacture
China
Venue suitability: The YC-3 suits cafeterias, hospitals, aged-care facilities, school canteens, hotels, and event catering operations where cold food must be held ready for service and repositioned between service areas. Explore our full range of Cold Bain Maries or browse all Modular Systems catering equipment.Installation & delivery: Plug-in 240 V single-phase connection — no dedicated circuit required. Arrives fully assembled on castors. Dispatched Australia-wide.Frequently asked questionsIs the YC-3 designed to cool food down?No — the YC-3 is a cold food holding unit only. Food must be pre-chilled before loading. It maintains a temperature of 2–5°C to keep food safe during service, but it is not a blast chiller or refrigerator designed to reduce food temperature.What GN pans does the YC-3 accept?The unit ships with 4 × 1/2 GN and 1 × 1/1 GN pans included. Maximum pan depth is 150 mm. Standard-depth GN pans fit the top opening.What power supply does the YC-3 require?The YC-3 runs on 240 V single-phase and draws 500 W (0.5 kW). It can be plugged into a standard 10 A GPO — no dedicated electrical circuit is required.Can the YC-3 be moved during service?Yes — it is mounted on four castors, two of which have brakes to hold the unit in position. It is designed to be repositioned between service areas as needed.What warranty does the YC-3 carry?The Modular Systems YC-3 is covered by a 1-year parts and labour warranty.
FED-X Three Door Salad Prep Fridge with Curve Glass Top - XTHP3100SALGC Net Capacity: 465L Cooling System: Fan forced cooling Temperature range: +2~+8°C Compressor: Cubigel Controller: Dixell Refrigerant: R290 Ambient Temperature: 32°C RH: 60% Stainless steel interior and exterior with rounded corners for easy cleaning Open top suitable for multiple pan configurations (Pans and lids are not included) Replaceable magnetic door seals User friendly Digital controls Integrated cutting board made from high-density polyethylene Heavy duty castors with front wheel brakes Pan and pan cover must be used to ensure correct operating temperature Weight loading per shelf: 40kg Dikensions (internal): 1234mm W x 580mm D x 564mm H 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 230W
Specifications
Capacity: 465L
Width: 1795mm
Finish: Stainless Steel
Depth: 700mm
Atosa Sandwich Prep Table with an inbuilt glass covered saladette that holds any combination of 1/3 or 1/6 GN pans, it’s purpose-built for quick and easy preparation of sandwiches, salads and more. The two-door under bench fridge uses a quiet, very energy efficient, fan-forced refrigeration system designed to operate in the most extreme kitchens. By using industry leading Embarco compressors they have the highest rated 43ºC ambient operating temp which is highly recommended for Australian kitchens.
Stainless steel doors offer exceptional insulation. With magnetic gaskets which not only ensures a firm seal that keeps heat, moisture and dust out, they increase energy efficiency by keeping the cold in without the need for latches. Saving money and making it effortless to use. The round corner dual-action design will be appreciated by chefs as they self close during normal use or when pushed past 90º stay open which is great for easy loading. Shelves to accommodate standard GN pans. Stainless steel finish inside and out makes them super easy to clean. Includes one epoxy coated wire shelf per section.
Air over ingredient well
Sliding lids over ingredient well
Sliding doors to rear canopy
Glass midshelf included
Stainless steel exterior and interior
Embraco compressor
Automatic defrost
Ventilated cooling
Shelves and castors are included
Cutting board included
Pans included
Dimensions: 1225(W) x 762(D) x 1420(H)mmWarranty: 48 Months Parts & 24 Labour
1530mm Wide – Atosa Sandwich Prep Table with an inbuilt glass-covered saladette that holds any combination of 1/3 or 1/6 GN pans, it’s purpose-built for quick and easy preparation of sandwiches, salads and more. The two-door under bench fridge uses a quiet, very energy efficient, fan-forced refrigeration system designed to operate in the most extreme kitchens. By using industry-leading Embarco compressors they have the highest rated 43ºC ambient operating temp which is highly recommended for Australian kitchens.
Stainless steel doors offer exceptional insulation. With magnetic gaskets which not only ensures a firm seal that keeps heat, moisture, and dust out, they increase energy efficiency by keeping the cold in without the need for latches. Saving money and making it effortless to use. The round corner dual-action design will be appreciated by chefs as they self close during normal use or when pushed past 90º stay open which is great for easy loading. Shelves to accommodate standard GN pans. Stainless steel finish inside and out makes them super easy to clean. Includes one epoxy coated wire shelf per section.
Air over ingredient well
Sliding lids over ingredient well
Glass midshelf included
Stainless steel exterior and interior
Embraco compressor
Automatic defrost
Ventilated cooling
Shelves and castors are included
Cutting board included
Pans included
Dimensions: 1530(W) x 762(D) x 1420(H)mm
Warranty: 48 Months Parts & 24 Labour
This range of bain maries is designed to hold cold food at correct serving temperatures.
Note: Roband bain maries are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.
All BM and BR bain maries can be manufactured with no corner legs for drop-in bench mounting. When ordering please specify by prefixing the model number with the letters NC e.g. NCBM24 (NC signifies 'no corner leg'). These items are made to order and are non-returnable.Features: Designed to hold cold food at serving temperature Includes motor slung underneath Stainless steel construction Removable cross bars Designed to take many combinations of gastronorm pans Thermometer display Maximum pan depth 65mm Quality refrigeration unit running on R404A refrigerant* Ball valve drain 2 row by 2-6 1/2 size pan options available Trolleys to suit – available separately *Safety regulations require careful preparation, handling and storage of food products at all times. Cold plate units operate with a single refrigeration coil attached to the underside of the tank, thus food is chilled from underneath. Users must be absolutely certain that a single refrigeration coil will suit their purpose and is in compliance with food safety standards. This product uses a 10A plugProduct Dimensions: 705(W) X 615(D) X 255 excludes motor cage(H)mm
1846mm Wide – Atosa Sandwich Prep Table with an inbuilt glass-covered saladette that holds any combination of 1/3 or 1/6 GN pans, it’s purpose-built for quick and easy preparation of sandwiches, salads and more. The two-door under bench fridge uses a quiet, very energy efficient, fan-forced refrigeration system designed to operate in the most extreme kitchens. By using industry-leading Embarco compressors they have the highest rated 43ºC ambient operating temp which is highly recommended for Australian kitchens.
Stainless steel doors offer exceptional insulation. With magnetic gaskets which not only ensures a firm seal that keeps heat, moisture, and dust out, they increase energy efficiency by keeping the cold in without the need for latches. Saving money and making it effortless to use. The round corner dual-action design will be appreciated by chefs as they self close during normal use or when pushed past 90º stay open which is great for easy loading. Shelves to accommodate standard GN pans. Stainless steel finish inside and out makes them super easy to clean. Includes one epoxy coated wire shelf per section.
Air over ingredient well
Sliding lids over ingredient well
Sliding doors to rear canopy
Glass midshelf included
Stainless steel exterior and interior
Embraco compressor
Automatic defrost
Ventilated cooling
Shelves and castors are included
Cutting board included
Pans included
Dimensions: 1846(W) x 762(D) x 1420(H)mmWarranty: 48 Months Parts & 24 Labour
This range of bain maries is designed to hold cold food at correct serving temperatures.
Note: Roband bain maries are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.
All BM and BR bain maries can be manufactured with no corner legs for drop-in bench mounting. When ordering please specify by prefixing the model number with the letters NC e.g. NCBM24 (NC signifies 'no corner leg'). These items are made to order and are non-returnable.Features: Designed to hold cold food at serving temperature Includes motor slung underneath Stainless steel construction Removable cross bars Designed to take many combinations of gastronorm pans Thermometer display Maximum pan depth 65mm Quality refrigeration unit running on R404A refrigerant* Ball valve drain 2 row by 2-6 1/2 size pan options available Trolleys to suit – available separately *Safety regulations require careful preparation, handling and storage of food products at all times. Cold plate units operate with a single refrigeration coil attached to the underside of the tank, thus food is chilled from underneath. Users must be absolutely certain that a single refrigeration coil will suit their purpose and is in compliance with food safety standards. This product uses a 10A plugProduct Dimensions: 1030(W) X 615(D) X 255(H)mm
This range of bain maries is designed to hold cold food at correct serving temperatures.
Note: Roband bain maries are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.
All BM and BR bain maries can be manufactured with no corner legs for drop-in bench mounting. When ordering please specify by prefixing the model number with the letters NC e.g. NCBM24 (NC signifies 'no corner leg'). These items are made to order and are non-returnable.Features: Designed to hold cold food at serving temperature Includes motor slung underneath Stainless steel construction Removable cross bars Designed to take many combinations of gastronorm pans Thermometer display Maximum pan depth 65mm Quality refrigeration unit running on R404A refrigerant* Ball valve drain 2 row by 2-6 1/2 size pan options available Trolleys to suit – available separately *Safety regulations require careful preparation, handling and storage of food products at all times. Cold plate units operate with a single refrigeration coil attached to the underside of the tank, thus food is chilled from underneath. Users must be absolutely certain that a single refrigeration coil will suit their purpose and is in compliance with food safety standards. This product uses a 10A plugProduct Dimensions: 1355(W) X 615(D) X 255 excludes motor cage(H)mm
These units match the complete range of Straight Hot Foodbars. The cold plate and cross fin coil foodbars are designed to provide cooling from top and bottom sources. The food bar needs to be connected to an external cooling source. They can take a variety of gastronorm pans up to 65mm deep.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.Features: Straight glass cold plate with cross fin coil foodbar No refrigeration unit supplied, designed to be connected to external refrigeration unit Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Removable cross bars Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain Note: Some images are shown with various pan combinations. Please contact customer service. This product uses a 10A plugProduct Dimensions: 1030(W) X 615(D) X 675(H)mm
This range of bain maries is designed to hold cold food at correct serving temperatures.
Note: Roband bain maries are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.
All BM and BR bain maries can be manufactured with no corner legs for drop-in bench mounting. When ordering please specify by prefixing the model number with the letters NC e.g. NCBM24 (NC signifies 'no corner leg'). These items are made to order and are non-returnable.Features: Designed to hold cold food at serving temperature Includes motor slung underneath Stainless steel construction Removable cross bars Designed to take many combinations of gastronorm pans Thermometer display Maximum pan depth 65mm Quality refrigeration unit running on R404A refrigerant* Ball valve drain 2 row by 2-6 1/2 size pan options available Trolleys to suit – available separately *Safety regulations require careful preparation, handling and storage of food products at all times. Cold plate units operate with a single refrigeration coil attached to the underside of the tank, thus food is chilled from underneath. Users must be absolutely certain that a single refrigeration coil will suit their purpose and is in compliance with food safety standards. This product uses a 10A plugProduct Dimensions: 1680(W) X 615(D) X 255 excludes motor cage(H)mm
These units match the complete range of Straight Hot Foodbars. The cold plate and cross fin coil foodbars are designed to provide cooling from top and bottom sources. The food bar needs to be connected to an external cooling source. They can take a variety of gastronorm pans up to 65mm deep.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.Features: Straight glass cold plate with cross fin coil foodbar No refrigeration unit supplied, designed to be connected to external refrigeration unit Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Removable cross bars Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain Note: Some images are shown with various pan combinations. Please contact customer service. This product uses a 10A plugProduct Dimensions: 1355(W) X 615(D) X 675(H)mm
This range of bain maries is designed to hold cold food at correct serving temperatures.
Note: Roband bain maries are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.
All BM and BR bain maries can be manufactured with no corner legs for drop-in bench mounting. When ordering please specify by prefixing the model number with the letters NC e.g. NCBM24 (NC signifies 'no corner leg'). These items are made to order and are non-returnable.Features: Designed to hold cold food at serving temperature Includes motor slung underneath Stainless steel construction Removable cross bars Designed to take many combinations of gastronorm pans Thermometer display Maximum pan depth 65mm Quality refrigeration unit running on R404A refrigerant* Ball valve drain 2 row by 2-6 1/2 size pan options available Trolleys to suit – available separately *Safety regulations require careful preparation, handling and storage of food products at all times. Cold plate units operate with a single refrigeration coil attached to the underside of the tank, thus food is chilled from underneath. Users must be absolutely certain that a single refrigeration coil will suit their purpose and is in compliance with food safety standards. This product uses a 10A plugProduct Dimensions: 2005(W) X 615(D) X 255 excludes motor cage(H)mm
These units match the complete range of Straight Hot Foodbars. The cold plate and cross fin coil foodbars are designed to provide cooling from top and bottom sources. The food bar needs to be connected to an external cooling source. They can take a variety of gastronorm pans up to 65mm deep.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.Features: Straight glass cold plate with cross fin coil foodbar No refrigeration unit supplied, designed to be connected to external refrigeration unit Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Removable cross bars Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain Note: Some images are shown with various pan combinations. Please contact customer service. This product uses a 10A plugProduct Dimensions: 1680(W) X 615(D) X 675(H)mm
These square profile foodbars boast the latest in styling and design, at the same time, offering all the features and reliability customers have come to expect of Roband’s foodbars. They can be built-in, bench mounted or supplied with a trolley to suit.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturer’s pans.Features: Square glass cold plate with cross fin coil food bar No refrigeration unit supplied, designed to be connected to external refrigeration unit Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain This product uses a 10A plugProduct Dimensions: 1030(W) X 615(D) X 750(H)mm
These units match the complete range of curved glass hot foodbars. The attractive curved glass front provides easy viewing of food contents. The units are designed to take a variety of gastronorm pans up to 65mm deep.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.Features: Curved glass cold plate with cross fin coil foodbar No refrigeration unit supplied, designed to be connected to external refrigeration unit. Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain This product uses a 10A plugProduct Dimensions: 1030(W) X 615(D) X 750(H)mm
The Thermaster SCB/15 is a refrigerated cold bain marie that keeps fresh toppings and ingredients at safe serving temperatures in high-throughput sandwich, salad, and café prep environments. The 1480 mm counter features a blown-well design with cross-flow pan cooling, holding seven 1/3 GN pan wells at +2 to +8°C while operators work directly from the bench surface.Why operators choose the SCB/15
Blown-well cross-flow cooling — chilled air circulates beneath each pan well, maintaining consistent temperature across all seven positions without mechanical contact with product.
Completely removable refrigeration unit — the self-contained compressor module slides out independently for fast on-site servicing without disturbing the bench.
Aspera compressors & German EBM-Pabst fans — commercial-grade components rated for continuous operation in ambient conditions up to 33°C and 75% RH.
Digital temperature control & read-out — operators confirm the holding temperature at a glance; auto defrost and self-evaporating drainage reduce daily maintenance.
PE cutting board included — board ships in the box; 230 mm deep working area and 855 mm bench height suit standard AU ergonomic workflows.
Specifications
Brand
Thermaster
Model / MPN
SCB/15
Type
Cold Bain Marie / Refrigerated Sandwich Bar
GN Pan Configuration
7 × 1/3 GN
Refrigerant
R134a
Temperature Range
+2 to +8°C
Gross Capacity
550 L
Doors
2
Door Type
Hinged
Glass Sneeze Guard
Yes — tiered glass display guard included
Cooling Type
Fan forced (blown-well cross-flow)
Power
240V; 460W
Power Type
Electric (Single Phase)
Compressor
Aspera
Fans
German EBM-Pabst
Working Area Depth
230 mm
Bench Height
855 mm
Castors
Yes
Construction
Stainless Steel interior & exterior
Product Dimensions (W × D × H)
1480 × 700 × 1255 mm
Packed Dimensions (W × D × H)
770 × 1550 × 1420 mm
Net Weight
147 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Includes
PE cutting board; sliding pan covers (must be in place for correct operating temperature)
Venue suitability: The SCB/15 suits sandwich shops, salad bars, deli counters, cafés, hotel buffets, and quick-service restaurants where continuous cold ingredient access at a prep bench is required. The removable refrigeration module is particularly valued in venues with limited servicing access. Browse the full Cold Bain Maries range or explore all Thermaster refrigeration equipment.Installation & delivery: The SCB/15 ships on castors and connects to a standard 240V/10A single-phase outlet — no trade installation required. Pans are not included; tops are holding units and product must be pre-chilled below 5°C before filling. Dispatched Australia-wide.Frequently asked questionsAre GN pans included? No — pans are not included. The unit accepts seven 1/3 GN pans. Confirm compatible pan depths with your supplier to ensure correct fit in the blown-well configuration.Does the refrigeration unit need to be hardwired? No — the SCB/15 runs on a standard 240V single-phase supply (460W). No trade electrical work is required for installation.What refrigerant does the SCB/15 use? R134a — a widely available commercial refrigerant compatible with all standard AU service technicians.Do the sliding pan covers need to be in place during service? Yes — sliding pan covers must be used during operation to maintain the correct holding temperature of +2 to +8°C. The blown-well system relies on the enclosed pan area to circulate chilled air efficiently.Can the refrigeration unit be serviced on-site? Yes — the self-contained refrigeration module is completely removable without disturbing the bench or adjacent equipment, which significantly reduces service downtime in busy kitchens.
Unique, efficient and seamlessly crafted, the Woodson 2 row, 3 bay Straight Glass Cold Food Display is constructed from double glazed, toughened glass. The high quality refrigeration comprises of a top mounted cross fin coil and a 90mm deep cold plate, ensuring food is kept at a consistent temperature. Coupled with a top mounted, fluorescent light for an illuminated interior, this unit delivers eye-catching product display, with high quality results.Features:
Includes a burn off tray for coil waste water with no need for plumbing
Undermount refrigeration unit is supplied with a condensate drain hose for connection to waste
Overflow from bain marie section is designed to drain into a pan or bucket - maintaining high hygiene levels
Unit is equipped to suit gastronorm sized pans up to 65mm deep
The adjustable digital controller is designed to hold temperature accurately between 2C and 5C
Available in 3-6 bay modules
Dimensions of 1030 x 600 x 690mm
Electrical rating of 0.6kW - 10A
Woodson Food Displays are manufactured to order, production typically takes 5-6 days after your order has been receivedProduct Dimensions: 1030(W) x 608(D) x 690(H)mmPlease note, stock availability will be confirmed at the time of placing your order. Unfortunately this supplier is unable to provide us with a stock report and we are required to manually confirm stock availability for each item. We apologize for the inconvenience. Feel free to contact us prior to ordering if you prefer us to confirm availability first. Thank you for your understanding
Sandwich and Preparation Display one door Counter with Canopy and Blown Air Well Energy saving CoolSmart controller ensures accurate temperature control High ambient rating for hard working environments Refrigerated blown air over and under all pans Polycarbonate sliding lids over blown air well Fully enclosed well under pans - prevents food dropping into cabinet Supplied with 10mm thick polypropylene cutting board Removable cassette refrigeration system for easy servicing Product Dimensions: 1152(W) x 771(D) x 845(H)mm
These units match the complete range of Straight Hot Foodbars. The cold plate and cross fin coil foodbars are designed to provide cooling from top and bottom sources. The food bar needs to be connected to an external cooling source. They can take a variety of gastronorm pans up to 65mm deep.
*Local health regulations can vary, please ensure intended use of these machines complies before ordering.
Note: Roband food display bars are designed to accommodate pans available from Roband Australia. Although other brands of pans may fit, this is not guaranteed due to variations in other manufacturers' pans.Features: Straight glass cold plate with cross fin coil foodbar No refrigeration unit supplied, designed to be connected to external refrigeration unit Cold plate and cross fin coil designed to provide cooling from top and bottom of unit* 1/2 size 65mm pans included All stainless steel construction with tubular frame Removable cross bars Streamlined for easy cleaning Overhead fluorescent light Adjustable digital thermostat with temperature readout Safety lock ball valve drain Note: Some images are shown with various pan combinations. Please contact customer service. This product uses a 10A plugProduct Dimensions: 2005(W) X 615(D) X 675(H)mm