Commercial griddles for Aussie cafes, restaurants, food trucks and burger bars — flat-plate cooking surfaces that sear, fry and toast in direct contact with the food, sized from compact benchtop units through to wide freestanding tops. This range covers gas and electric models with smooth, grooved and ribbed plates so you can match the surface to what you actually cook. Griddles sit inside our broader commercial cooking equipment range, alongside chargrills for the char-marked work a flat plate can't do.
Who griddles are for
If your menu leans on burgers, breakfast, eggs, bacon, pancakes or toasted sandwiches, a griddle earns its bench space fast. Cafes run a 600mm plate for the morning rush; burger bars and diners want a wide top so two cooks can work side by side; pubs and clubs use them for steak sandwiches and schnitzels through service. Food trucks and mobile caterers favour LPG and benchtop units because they plug into a tight setup and travel well. The common thread is volume — a griddle holds a large, even cooking zone you can load front to back, which is exactly what a frypan can't do once a venue gets busy.
What's in scope
Gas griddles
Natural-gas and LPG models heat quickly and hold their temperature well under a heavy load, which is why most high-turnover venues run gas. They need a gas connection and licensed installation, but recover heat fast when you drop a cold load of patties onto the plate. LPG versions suit food trucks and outdoor catering where there's no mains gas.
Electric griddles
Electric models install with standard power (larger units need three-phase), which makes them the practical pick for prep kitchens, fit-outs without a gas line, and venues that want tighter zone control. For more on where electric fits, see our guide to the best commercial electric griddles for restaurants.
Plate type — flat, grooved and ribbed
A smooth flat plate is the all-rounder: eggs, pancakes, bacon, onions, toasted sandwiches. A grooved or ribbed plate puts sear lines on the food and lets fat drain away, so it reads more like a chargrill for steaks, chicken and burgers. Some tops are half-and-half — smooth on one side, ribbed on the other — so you cover both jobs on one unit. If you're weighing it up, our breakdown of flat-top vs ribbed griddles walks through the trade-offs.
Benchtop and freestanding
Benchtop griddles sit on a counter or stand and keep a small footprint — the fit for cafes, kiosks and mobile setups. Freestanding (floor-standing) griddles are larger units that often pair a wide plate with a storage cabinet or oven base underneath, built for back-to-back service in a busy line.
How to choose a griddle in three steps
Picking the right griddle comes down to three questions, in order.
Step 1 — Gas or electric?
Start with your services and your kitchen. If you've got mains gas and high volume, a gas griddle gives you fast recovery and lower running costs in most states. No gas line, a prep-only space, or a fit-out you'd rather keep simple? An electric model installs more easily and zones the heat tightly. Catering on the move? LPG keeps you running off bottled gas.
Step 2 — Plate width and surface
Size the plate to your peak, not your average. As a rule of thumb, a 300–400mm plate suits low-volume cafes and sandwich bars; 600mm is the everyday workhorse for most restaurants and takeaways; 900mm and wider is for burger bars, breakfast venues and production kitchens running two cooks at once. Then choose the surface — smooth flat for the broadest menu, grooved or ribbed if seared protein is the main act.
Step 3 — Format, power and ventilation
Confirm the footprint fits your bench or floor space, and check the connection: gas units need licensed installation, larger electric units typically need three-phase power. A griddle throws off heat and grease-laden vapour, so it usually needs to sit under a canopy or extraction hood to meet ventilation requirements — confirm your setup before you buy.
If you want the full background before you commit, our complete guide to choosing a griddle covers plate metals, thickness and maintenance in more depth.
Popular picks: two proven starting points are the Roband high-production griddle for a benchtop electric plate that handles steady cafe volume, and the Cobra CT6 600mm gas griddle toaster where you want a wide gas plate with built-in toasting for breakfast and burger service.
Frequently asked questions
What is a commercial griddle?
A commercial griddle is a flat metal cooking surface, heated by gas or electricity, that cooks food in direct contact with the plate — frying, searing and toasting rather than grilling over flame. The large, even cooking zone lets a kitchen turn out burgers, eggs, bacon, pancakes and toasted sandwiches in volume, which is why griddles are a staple in cafes, diners and burger bars.
What's the difference between a griddle and a hotplate?
In Australian commercial kitchens the terms are used interchangeably — both describe a flat, solid cooking surface for direct-contact frying and searing. "Hotplate" tends to be the older or more casual term; "griddle" is the more common product label. Either way you're buying the same thing: a flat plate, not an open grill.
Should I choose a gas griddle or an electric griddle?
Choose gas if you have a mains connection and high volume — gas griddles heat quickly, recover fast under load and usually cost less to run. Choose electric if you don't have a gas line, you're fitting out a prep kitchen, or you want precise temperature zones; electric models install with standard or three-phase power and skip the licensed gas work. For mobile catering and food trucks, LPG gas is the usual answer.
What size griddle do I need?
Size by your busiest service. A 300–400mm plate covers low-volume cafes and sandwich bars; a 600mm plate is the standard choice for most restaurants and takeaways; 900mm and wider suits burger bars, breakfast venues and high-output production kitchens where more than one cook works the plate. Measure your bench or floor space before you settle on a width.
What's the difference between a flat and a ribbed griddle plate?
A smooth flat plate is the all-rounder for eggs, pancakes, bacon and toasted sandwiches. A grooved or ribbed plate leaves sear lines on the food and channels fat away as it cooks, so it behaves more like a chargrill for steaks, burgers and chicken. If your menu needs both, look for a unit with a half-flat, half-ribbed top.
Does a commercial griddle need a ventilation hood?
In most cases, yes. A griddle produces heat and grease-laden vapour during service, so it generally needs to sit under a canopy or extraction hood to meet kitchen ventilation requirements. Check your local council and food-safety obligations, and confirm your extraction setup can handle the unit before installing.
Do you deliver griddles across Australia?
Yes. Commercial Kitchen Store ships nationwide, and Australian-based phone support is available on 1300 111 901 if you need help sizing a griddle to your kitchen. Our range is backed by genuine customer reviews, so you can see how each unit performs in real venues before you buy.
GH-400 MAX~ELECTRIC Griddle
• Polished mild steel plate, 12mm thickness• Stainless steel body• Adjustable thermostat that ranges from 50-300℃• Removable stainless steel oil collector in the front• Splash guard around the griddle plate, 2mm thickness• Blue power indicator light• Yellow heating indicator light• Bakelite knob for easy grasp and operation• Deep drawn oil drainage hole• Anti-slippery rubber foot• Durable stainless steel heating elements
Hotplate cooking surface: 396 x 400 mm
Product dimension: 400 x 546 x 270 mm
One Year Return to Base Warranty
Power: 240V; 3kW; 13A
Ex-Showroom: Fagor 700 Series Gas Charcoal 2 Grid Grill BG7-10-NSW1460 Lot Number: NSW1460Class: 1Conditions: New unit without packaging, all parts within unit.Warranty: 12 Months The gas cookers in the 700 Series may be fitted with open burners, ovens, fry-tops, hotplates, pasta cookers, barbecues, cooking pots, fryers, bain-marie and Bratt pans, combined in different ways to meet the needs of each customer. Made of austenitic stainless steel, the cookers in this range have tilted control panels to provide better access to the buttons and controls on the front of the machine, in addition to built-in handles and grease collection trays. The equipment in the 700 Series is formed by machines with the highest operating powers on the market, with excellent performance and recovery ratios. Made of stainless steel. Burner in stainless steel with pilot. Piezoelectric burner ignition. Safety valve and thermocouple. Lava rocks. 2 cast iron grids. Grid dimensions: 340 x 500 mm. The angle of the cooking grid can be adjusted to three positions. Fat collector. Power: 50 mj/h or 14KWDimensions: 700 x 780 x 290 mm
Original Product Description:The Kore 700 commercial gas charcoal barbecues (chargrills) are perfect for grilling any type of food to perfection. With a high temperature reach of over 400°C, the grill seals the surface of the produce quickly, ensuring that the interior remains juicy and succulent.
This grill is made from stainless steel, ensuring durability and resistance to rust. The heating of the volcanic rocks is achieved through stainless-steel tubular burners, which ignite quickly and easily with the electronic spark igniter. To prevent splashes, the grill has a stainless-steel rear plate, ensuring that the cooking area remains clean and tidy.
For easy cleaning, the grill is equipped with a removable grease collection drawer, which allows for the quick and easy disposal of any excess grease. The controls are conveniently located with a protective support base and a system that prevents water infiltration, making the Kore 700 a reliable and long-lasting appliance.
Versatile
The grills of the KORE 700 range are available in a wide variety of models: both half module and whole module and with iron or stainless steel grills. Moreover, they include a scraper to perfectly clean the grill as standard.
Clean
The gas model grills are made of ceramic stone which creates a shield against drops of fat on the burners, preventing flames from occurring, and ensuring optimum temperature distribution. They are also much quicker and easier to clean than volcanic rock.
Powerful
They can reach up to 8.1 kW, higher than other products on the market.
General Characteristics:
Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel
Laser-cut joints and automatic welding. Hidden screws.
Fitted with an opening to collect cooking grease and a tray to store it.
Machines are fitted with removable 130 mm high guards to prevent splashes, made of stainless steel.
High temperature enamelled cast iron flue protector.
Access to the components from the front.
Machines with IPX5 grade water protection.
Mild steel grills, dismountable without the need for tools, in 170 mm wide sections.
The mild steel grills are reversible, with different finishes on each side:· Tilted and grooved with ridges for meat· Horizontal and flat for fish and vegetables
These grills reach a very high temperature (400 ºC), meaning that the surface of the product is quickly sealed and inside it remains much juicier.
Groups of high-efficiency tube burners, (a group of two burners for half-sized module models, two groups for whole module models).
Independent control for each group of burners via a safety valve with a thermocouple.
Burners turned on using Piezo electric ignition.
The burners heat ceramic stones that sit on a supporting rack, so that they can then heat food on the grill.
Ex-Showroom: Fagor 700 Series Fry Top FTG-C7-05L-NSW1473 Lot Number: NSW1473Class: 1Conditions: Ex-showroom unit in good condition with no packagingWarranty: 12 Months The Fagor Industrial 700 Series presents new styling, practical and efficient solutions and important improvements for users. The 700 Series offers functional solutions that improve product performance and introduces new and significant technical improvements, such as increased power for burners, ovens and grills. Always focused on improving and evolving, we’ve designed a series that is unbeatable in ergonomics, easy to use and, above all, easy to clean. All this combined with attractive styling, Fagor Industrial’s experience and quality standards makes the 700 Series capable of the highest standards in performance. The 700 Series fry-tops have stainless steel burners with an ignition pilot light, and include a “Maximum-Minimum” type valve to control the burner flame and have thermostatic control of the plate temperature: 120 ºC - 310 ºC. Key Features Made of stainless steel Smooth hot-plate 50 microns thickness chromium coated steel sheeting hot-plate Surface area: 330 x 550 mm Burner in stainless steel with pilot Thermostat control of the hot-plate temperature 120 Cº -310 Cº Fully welded splashguard Flame failure included Fat collector under the grill Easy ignition Power: 25 mj/h or 7KW Dimensions: 350 x 780 x 290 mm
Original Product Description:Transform your commercial kitchen with the Fagor Kore 700 Fry-Top. This powerful appliance is designed to make food preparation quick, efficient and effortless. With a large grilling plate, you can cook up a storm in no time and enjoy perfectly cooked food every time. Whether you're preparing breakfast, lunch or dinner, the Fagor is the ideal choice for busy kitchens.
Grill welded to the surface top
Cast iron grill up to 15 mm thick. Using robotic soldering to fix the grill to the surface top ensures that it fulfils European norm EN-203-3 on materials that come into contact with foods, obtaining radii of curvature of at least 3.5 mm in all joints.
Tilted grill
The fry top is tilted towards the front to ensure that fat runs towards the opening of the fat collection tray.
Quick reaction and response
Quick reaction after detecting food.
Power
Heating control depending on the version:
Via thermostatic valve (100 ÷ 300 ºC). MAX/MIN valve. High power of the heating elements and the gas burners
Temperature distribution
Very good and uniform distribution of temperature. The difference between the average of the 5 maximum and minimum temperatures, in terms of the average temperature, is below 8%.
Compliance with temperature regulations
The temperatures measured at the front of the surface top (work area) are below those included in regulation EN 203-1.
General Characteristics:
Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
Laser-cut joints, automatic welding and polished.
12 or 15 mm thick mild steel fry tops which are quick-heating and high power.
Models with smooth, grooved and mixed hot plates (2/3 smooth + 1/3 grooved).
Versions with 50-micron thick chrome surface for the three hot plate types.
Gas heated models with high efficiency burners (separate burners for whole-module models).
Gas heated models with thermostatic temperature control (between100 and 300 °C) or operation via safety thermostat with thermocouple.
Burner ignition through electronic spark igniter. Therefore, the gas models do not need electricity for installation. With an access tube for manual ignition.
Whole-module fry tops have two separate heating areas.
Rapid reaction and recovery times of the fry-top temperature.
The fry tops are welded to the stamped surface top.
The stamped shell and its rounded edges and corners make cleaning much easier.
The fry top is tilted towards the front to make it easier to collect grease and liquids.
Fitted with an opening to collect cooking grease and a tray to store it which has capacity to store up to 2 litres depending on the model.
Optional anti-splash side and rear guards, easy to remove.
High-temperature enamelled cast iron flue protector.
Access to components from the front.
Machines with IPX5 grade water protection.Optional accessories (See accessories page at the end of the chapter)
Scraper (*)
Anti-splash guard (in three parts to make cleaning easier).
(*) The models with a chrome surface include the scraper as standard.
Ex-Showroom: Fagor 700 Series Natural Gas Fry Top FTG7-05L-NSW1472 Lot Number: NSW1472Class: 1Conditions: Ex showroom unit, unused without packaging.Warranty: 12 Months Key Features Made of stainless steel Smooth hot-plate Surface area: 20 dm2 Burner in stainless steel with pilot Thermostat control of the hot-plate temperature 120 Cº -310 Cº Fully welded splashguard Flame failure included Fat collector under the grill Easy ignition Power: 6.3 kW Dimensions: 350 x 775 x 290 mm
Original Product Description:Transform your commercial kitchen with the Fagor Kore 700 Fry-Top. This powerful appliance is designed to make food preparation quick, efficient and effortless. With a large grilling plate, you can cook up a storm in no time and enjoy perfectly cooked food every time. Whether you're preparing breakfast, lunch or dinner, the Fagor is the ideal choice for busy kitchens.
Grill welded to the surface top
Cast iron grill up to 15 mm thick. Using robotic soldering to fix the grill to the surface top ensures that it fulfils European norm EN-203-3 on materials that come into contact with foods, obtaining radii of curvature of at least 3.5 mm in all joints.
Tilted grill
The fry top is tilted towards the front to ensure that fat runs towards the opening of the fat collection tray.
Quick reaction and response
Quick reaction after detecting food.
Power
Heating control depending on the version:
Via thermostatic valve (100 ÷ 300 ºC). MAX/MIN valve. High power of the heating elements and the gas burners
Temperature distribution
Very good and uniform distribution of temperature. The difference between the average of the 5 maximum and minimum temperatures, in terms of the average temperature, is below 8%.
Compliance with temperature regulations
The temperatures measured at the front of the surface top (work area) are below those included in regulation EN 203-1.
General Characteristics:
Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
Laser-cut joints, automatic welding and polished.
12 or 15 mm thick mild steel fry tops which are quick-heating and high power.
Models with smooth, grooved and mixed hot plates (2/3 smooth + 1/3 grooved).
Versions with 50-micron thick chrome surface for the three hot plate types.
Gas heated models with high efficiency burners (separate burners for whole-module models).
Gas heated models with thermostatic temperature control (between100 and 300 °C) or operation via safety thermostat with thermocouple.
Burner ignition through electronic spark igniter. Therefore, the gas models do not need electricity for installation. With an access tube for manual ignition.
Whole-module fry tops have two separate heating areas.
Rapid reaction and recovery times of the fry-top temperature.
The fry tops are welded to the stamped surface top.
The stamped shell and its rounded edges and corners make cleaning much easier.
The fry top is tilted towards the front to make it easier to collect grease and liquids.
Fitted with an opening to collect cooking grease and a tray to store it which has capacity to store up to 2 litres depending on the model.
Optional anti-splash side and rear guards, easy to remove.
High-temperature enamelled cast iron flue protector.
Access to components from the front.
Machines with IPX5 grade water protection.Optional accessories (See accessories page at the end of the chapter)
Scraper (*)
Anti-splash guard (in three parts to make cleaning easier).
(*) The models with a chrome surface include the scraper as standard.
Electmax 700 Series Induction Griddle with Splashback EGP7-800 Key Features Stainless steel body and stand Touch control/Adjust the power by knob Without plug, hard wiring Electric overheating production Mild Steel Cooking Surface Material Oil Tray Splashback guard Storage space under Cooking Temperature: 80°C to 300°C Warranty: 1 Year Parts and Labour + 1 Year Parts Only for Products Registered within 14 Days of InvoicePower: 415V; 3~N; 10kW
The Fagor FTG7-05L is a natural gas fry-top griddle from the 700 Series, built around a single-zone smooth mild-steel hot-plate for searing, frying and finishing on a benchtop footprint.
Why operators choose the FTG7-05L
Smooth mild-steel plate — even, fast-heating cooking surface across a 20 dm² work area.
Thermostatic control — dial the plate from 120°C to 310°C to match delicate and high-heat service.
Stainless-steel burner with pilot — reliable gas heating with flame-failure protection for safety.
Fully welded splashguard — contains spatter and wipes down cleanly between services.
Fat collector under the grill — channels grease away from the cooking zone for tidier operation.
Easy ignition — quick, repeatable lighting at the start of every shift.
Specifications
Brand
Fagor
Model / MPN
FTG7-05L
Type
Griddle
Power Type
Natural Gas
Gas Output
6.3 kW
Cooking Zones
1
Plate Material
Mild Steel (smooth)
Surface Area
20 dm²
Temperature Range
120°C – 310°C
Body Material
Stainless Steel
Product Dimensions
350(W) x 775(D) x 290(H)mm
Packed Dimensions
390(W) x 835(D) x 585(H)mm
Net Weight
43 kg
Country of Manufacture
Spain
Warranty
2 Years Parts and Labour + 2 Years Parts Only with Product Registration
Venue suitability: The single-zone footprint suits cafes, pubs, food trucks and smaller commercial kitchens that need a dependable gas griddle for breakfast service, burgers and quick-fry items without committing bench space to a full cookline.
Browse the full range of commercial Griddles or see more equipment from Fagor to match this unit to the rest of your kitchen.
Installation & delivery: Supplied as a benchtop unit requiring a natural gas connection by a licensed gas fitter. Dispatched Australia-wide.
Frequently asked questions
What fuel does the Fagor FTG7-05L use? It runs on natural gas, with a stainless-steel burner and pilot plus flame-failure protection.
Is the plate smooth or grooved? The FTG7-05L has a smooth mild-steel hot-plate, ideal for eggs, pancakes, burgers and general fry-top cooking.
What temperature range does it reach? The thermostat controls the plate between 120°C and 310°C.
How much cooking surface does it offer? The hot-plate provides a 20 dm² cooking area on a 350mm-wide benchtop body.
What warranty is included? It carries 2 years parts and labour, plus a further 2 years parts only when the product is registered.
The Fagor FTG-C9-05L is a single-zone natural gas griddle (fry top) from the 900 Series, built with a smooth chrome-plated cooking plate and thermostatic temperature control for high-volume commercial cooking.
Why operators choose this griddle
Chrome-plated smooth plate — 50-micron hard chrome surface seals in heat, speeds recovery and stops flavour transfer between fish, eggs and meats.
Thermostatic control 120–310°C — dial in a precise plate temperature and hold it through service.
Stainless tubular burner with pilot — piezoelectric ignition and a reliable pilot flame for fast, even heat-up.
Front grease management — plate tilts to a front collection point feeding a removable fat drawer for quick clean-down.
Stainless steel build — AISI-304 surfaces with rounded radii meet food-contact hygiene standards.
Specifications
Brand
Fagor
Model / MPN
FTG-C9-05L
Type
Griddle (Fry Top)
Power Type
Natural Gas
Gas Output
9.34 kW
Plate Type
Smooth, chrome-plated (50 micron)
Plate / Cooking Surface
335 x 640 mm (24 dm²)
Cooking Zones
1
Temperature Range
120–310°C (thermostatic)
Controls
1 knob
Material
Stainless Steel
Dimensions (W x D x H)
425 x 900 x 320 mm
Net Weight
70 kg
Country of Manufacture
Spain
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days)
Venue suitability: Ideal for cafes, pubs, hotels and busy restaurant cooklines that need a dedicated smooth griddle for breakfast service, seafood, eggs and grilled mains where a chrome plate keeps flavours separate.
Browse more options in our Griddles collection, or see the full Fagor range for matching 900 Series cooking equipment.
Installation & delivery: Requires a natural gas connection and commissioning by a licensed gas fitter. Dispatched Australia-wide.
Frequently asked questions
Is the Fagor FTG-C9-05L natural gas or electric? It is a natural gas griddle with a stainless tubular burner, pilot flame and piezoelectric ignition.
What type of plate does it have? A smooth, 50-micron hard chrome-plated cooking plate measuring 335 x 640 mm (24 dm²).
What temperature range does it reach? The thermostat controls the plate between 120°C and 310°C.
How big is the FTG-C9-05L? It measures 425 mm wide x 900 mm deep x 320 mm high and weighs 70 kg net.
What warranty does it come with? 2 Years Parts & Labour plus 2 Years Parts Only when the product is registered within 14 days of invoice.
The Fagor FTG-C9-10L is a natural gas fry-top griddle that gives a commercial kitchen two independently controlled chrome cooking zones for searing, roasting and finishing across an 820 x 620mm smooth hot-plate.
Why operators choose the FTG-C9-10L
Two thermostatic zones — run different temperatures across the plate, from gentle holding to a hard sear, controlled from 120°C to 310°C.
Hard-chrome cooking surface — a 20mm mild steel plate with 50-micron heavy-duty chrome plating that resists flavour transfer, ideal for fish, seafood and egg dishes.
76 MJ/h gas output — stainless steel tubular burners with pilot lights deliver fast heat-up and quick temperature recovery under service load.
Piezoelectric ignition — reliable, tool-free lighting at the start of each shift.
Built-in fat collector — a removable grease tray under the grill keeps the station clean and speeds end-of-day wipe-down.
Specifications
Brand
Fagor
Model / MPN
FTG-C9-10L
Type
Fry-Top Griddle
Power Type
Natural Gas
Gas Output
76 MJ/h (21 kW)
Cooking Zones
2
Plate Surface
Smooth chrome (50-micron, 20mm mild steel base)
Plate Dimensions
820 x 620mm
Temperature Range
120°C - 310°C (thermostatic)
Ignition
Piezoelectric
Material
Stainless Steel
Product Dimensions
850(W) x 900(D) x 290(H)mm
Packed Dimensions
930(W) x 990(D) x 620(H)mm
Net Weight
148 kg
Country of Manufacture
Spain
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with registration)
Venue suitability: A benchtop fry-top griddle suited to cafes, hotels, pubs and high-volume kitchens that cook fish, seafood, breakfast and a la carte to order, where two independent zones let one operator run multiple proteins at once. Browse the full Griddles range or the complete Fagor line-up to compare sizes and fuel types.
Installation & delivery: Supplied as a benchtop unit requiring connection to a natural gas supply by a licensed gas fitter. Dispatched Australia-wide.
Frequently asked questions
Is the FTG-C9-10L natural gas or LPG? This model is configured for natural gas.
What is the cooking surface made of? A 20mm mild steel plate with a heavy-duty 50-micron chrome plating, giving a smooth hot-plate that resists flavour transfer between foods.
How hot does the plate get? Each zone is thermostatically controlled from 120°C up to 310°C.
How many cooking zones does it have? Two independent zones, each with its own thermostat, across the 820 x 620mm plate.
What warranty is included? 2 years parts and labour plus a further 2 years parts only when the product is registered within 14 days of invoice.
The GasMax RGT-24E is a two-burner natural gas griddle that delivers a continuous, even cooking surface for high-volume breakfast, burger and teppanyaki service in a compact 610mm benchtop footprint.Why operators choose the RGT-24E
Two heavy-duty burners — 56 MJ/h of natural gas heat for fast warm-up and quick recovery under load.
20mm heavy-duty steel plate — thick grilling surface holds heat evenly across the cook zone and resists warping.
Auto ignition & flame failure — single-action lighting with a safety cut-off if the flame drops.
Stainless steel construction — wipe-clean body with a removable S/S drip tray for fast end-of-shift clean-down.
Adjustable feet — 45mm height adjustment levels the plate on any bench.
Specifications
Brand
GasMax
Model / MPN
RGT-24E
Type
Gas Griddle
Burners
2
Gas type
Natural Gas
Gas consumption
56 MJ/h
Total output
60.4 MJ/h
Gas inlet
3/4 inch
Plate
20mm heavy-duty steel
Ignition
Auto ignition with flame failure
Construction
Stainless Steel
Product dimensions
610(W) x 850(D) x 420(H)mm
Packed dimensions
710(W) x 940(D) x 540(H)mm
Country of manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only with product registration
Venue suitability: Suited to cafes, food trucks, pubs, clubs and quick-service kitchens needing a reliable benchtop griddle for breakfasts, burgers and grilled service. Browse the full Griddles range or see more from GasMAX to match it with a stand and other cookline gear.Installation & delivery: Connects to natural gas via a 3/4 inch inlet and should be commissioned by a licensed gasfitter. Dispatched Australia-wide.Frequently asked questionsIs the RGT-24E natural gas or LPG? The RGT-24E is the natural gas model. A separate LPG version (RGT-24ELPG) is available if you run on bottled gas.How many burners does it have? Two heavy-duty burners rated at 56 MJ/h gas consumption, with 60.4 MJ/h total output.How thick is the griddle plate? The cooking plate is 20mm heavy-duty steel, which holds heat evenly and resists warping under sustained load.Does it have safety features? Yes — auto ignition for single-action lighting and a flame failure device that shuts off the gas if the flame goes out.What warranty does it come with? 2 Years Parts & Labour, plus an additional 2 Years Parts Only when you register the product within the registration window.
The GasMax RGT-36E is a three burner gas griddle that delivers a continuous, even cooking surface for high-volume breakfast, burger and teppanyaki service in a commercial kitchen. Why operators choose the RGT-36E
Three heavy-duty burners — 84 MJ/h total for fast heat-up and rapid recovery under load.
20mm removable steel plate — holds heat evenly across the surface and lifts out for thorough cleaning.
Auto ignition with flame failure shut-off — safer, quicker starts and automatic gas cut-off if a flame goes out.
Natural gas or LPG — one unit suits either gas supply on site.
Stainless steel body with drip tray — durable, hygienic and easy to wipe down between services. Specifications
Brand
GasMax
Model / MPN
RGT-36E
Type
Gas Griddle
Burners
3
Gas Output
84 MJ/h
Gas Type
Natural Gas or LPG
Gas Inlet
3/4-inch
Plate
20mm removable steel plate
Ignition
Auto ignition with flame failure shut-off
Construction
Stainless Steel
Product Dimensions
910(W) x 840(D) x 420(H)mm
Packed Dimensions
980(W) x 1080(D) x 540(H)mm
Net Weight
130 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Venue suitability: A benchtop griddle of this output suits cafes, pubs, food trucks, diners and catering kitchens running steady grill service across the day. Browse the rest of our Griddles range or see the full GasMAX line-up to match this unit with a compatible stand. Installation & delivery: Connects to natural gas or LPG and should be commissioned by a licensed gas fitter. Dispatched Australia-wide. Frequently asked questions How many burners does the RGT-36E have? It has three heavy-duty gas burners delivering 84 MJ/h in total. Does it run on natural gas or LPG? It is suited to both natural gas and LPG supply. Is the griddle plate removable? Yes — the 20mm steel plate lifts out for thorough cleaning. What ignition does it use? Auto ignition with a flame failure shut-off that cuts the gas if a flame goes out. What warranty does it come with? 2 Years Parts & Labour plus 2 Years Parts Only when the product is registered.
The GasMax RGT-24ELPG is a two burner benchtop LPG gas griddle that delivers a continuous, even cooking surface for breakfasts, burgers, steaks and teppanyaki-style service in busy commercial kitchens.Why operators choose the RGT-24ELPG
Two heavy-duty 29.52 MJ burners — 60.4 MJ/h total output for fast heat-up and quick recovery under load.
20mm removable mild-steel plate — holds heat evenly across the surface and lifts out for thorough cleaning.
Auto ignition & flame failure shut-off — one-touch lighting with a built-in safety cut-off if the flame goes out.
Stainless steel construction with S/S drip tray — wipes down fast and stands up to daily commercial use.
Adjustable feet — 45mm of height adjustment to level the unit on any benchtop.
Specifications
Brand
GasMax
Model / MPN
RGT-24ELPG
Type
Two Burner Gas Griddle
Fuel
LPG
Burners
2 x 29.52 MJ
Total gas output
60.4 MJ/h
Consumption
54 MJ/h
Gas inlet
3/4 inch
Plate
20mm removable mild steel
Ignition
Auto ignition with flame failure shut-off
Construction
Stainless steel
Product dimensions
610(W) x 850(D) x 420(H)mm
Packed dimensions
710(W) x 940(D) x 540(H)mm
Net weight
90 kg
Matching stand
QR-24-S
Warranty
2 Years Parts & Labour + 2 Years Parts Only with product registration
Venue suitability: Suited to cafes, diners, food trucks, pubs and takeaway kitchens running a high-volume hot line where a reliable LPG griddle is the workhorse of the service. It sits within our range of commercial Griddles and the wider GasMAX cooking line, so you can match it to a stand or companion cookline unit.Installation & delivery: Supplied configured for LPG with a 3/4-inch gas inlet; final connection should be completed by a licensed gasfitter. Pair with the QR-24-S stand for a benchtop-free install. Dispatched Australia-wide.Frequently asked questionsIs the RGT-24ELPG natural gas or LPG? It is an LPG model. The LPG model or option kit is not available in New Zealand.How many burners does it have and what is the total output? Two heavy-duty 29.52 MJ burners for 60.4 MJ/h total gas output, with a listed consumption of 54 MJ/h.Can the griddle plate be removed for cleaning? Yes. It uses a 20mm heavy-duty mild-steel plate that is removable, and there is a stainless steel drip tray to catch run-off.Is there a matching stand? Yes, the QR-24-S stand is designed to suit this griddle.What warranty does it come with? 2 Years Parts & Labour plus 2 Years Parts Only when the product is registered.
The GasMax RGT-48ELPG is a four-burner LPG bench-top griddle that delivers a large, flat 20mm mild-steel cooking surface for high-volume breakfast, burger and teppanyaki service.Why operators choose the RGT-48ELPG
Four heavy-duty burners — 108 MJ/h total output for fast heat-up and quick recovery under load.
20mm steel plate — thick mild-steel surface holds heat evenly and resists warping during long shifts.
Auto ignition & flame failure shut-off — one-touch lighting and a safety cut-off if a flame goes out.
Stainless steel body & drip tray — durable, wipe-down construction with an easy-empty grease tray.
Adjustable feet — level the unit on any bench, with 45mm height adjustment.
Specifications
Brand
GasMax
Model / MPN
RGT-48ELPG
Type
Griddle
Fuel
LPG
Burners
4
Gas output
108 MJ/h
Cooking plate
20mm mild steel
Ignition
Auto ignition with flame failure shut-off
Gas inlet
3/4 inch
Construction
Stainless steel
Product dimensions
1216(W) x 850(D) x 420(H)mm
Packed dimensions
950(W) x 1380(D) x 580(H)mm
Net weight
169 kg
Matching stand
QR-48-S
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: Suited to cafes, pubs, food trucks, burger bars and hotel kitchens that need a wide, continuous griddle surface for sustained high-volume cooking.Browse the full range of commercial Griddles or see more cooking equipment from GasMAX to match this unit with a stand or complementary line.Installation & delivery: Supplied for LPG and requires connection by a licensed gas fitter. Dispatched Australia-wide.Gas connection: 3/4" gas inlet.Frequently asked questionsWhat fuel does the RGT-48ELPG use? It runs on LPG and has a 3/4-inch gas inlet; the LPG model and option kit are not available in New Zealand.How many burners does it have and what is the total output? It has four burners delivering 108 MJ/h total.How thick is the cooking plate? The griddle uses a 20mm heavy-duty mild-steel plate that holds and recovers heat evenly.Does it have safety features? Yes — auto ignition for one-touch lighting and flame failure shut-off that cuts gas if a flame goes out.Is there a matching stand? Yes, the QR-48-S stand is designed to pair with this griddle.
The GasMax GG-36 is a benchtop natural gas griddle that gives commercial kitchens a 900mm continuous cooking surface for breakfast service, burgers, teppanyaki and high-volume griddle work.Why operators choose the GG-36
Three heavy-duty burners — u-shape steel burners deliver even, full-plate heat distribution across the cooking surface.
22mm heavy-duty steel plate — holds and recovers heat under continuous load for consistent searing across the surface.
Flame failure protection — gas shuts off automatically if a burner is extinguished, for safer service.
Stainless steel construction — stainless body with a raised splashback and three-sided splash guard for easy wipe-down.
Front grease channel and oil collector — drains grease away from the cook zone into a stainless collector for quick clean-down.
Specifications
Brand
GasMax
Model / MPN
GG-36
Type
Benchtop Gas Griddle
Fuel
Natural Gas
Burners
3 (u-shape steel)
Gas Output
99 MJ/h
Griddle Plate
22mm heavy-duty steel
Construction
Stainless Steel
Product Dimensions
900(W) x 824(D) x 546(H)mm
Packed Dimensions
1030(W) x 890(D) x 520(H)mm
Net Weight
110 kg
Gas Connection
3/4-inch rear
Safety
Flame failure system
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Venue suitability: The 900mm plate and 99 MJ/h output suit busy cafes, pubs, food trucks and hotel kitchens running all-day breakfast or burger service. Browse the full Griddles range or see more from GasMAX to match it with the rest of your cookline.Installation & delivery: Connects to a natural gas supply via the 3/4-inch rear connection and must be commissioned by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsDoes the GasMax GG-36 run on natural gas or LPG? The GG-36 is the natural gas model. A separate LPG variant (GG-36LPG) is available if you need bottled gas.How many burners does the GG-36 have? It has three heavy-duty u-shape steel burners for even heat across the full plate, with a total output of 99 MJ/h.How wide is the cooking surface? The griddle has an overall width of 900mm, giving a large continuous steel cooking plate.How thick is the griddle plate? The plate is 22mm heavy-duty steel, which holds heat well and recovers quickly under continuous use.What warranty does the GG-36 come with? It carries 2 years parts and labour plus an additional 2 years parts-only cover when the product is registered.
The GasMax GG-24 is a benchtop natural gas griddle that delivers an even, high-output cooking surface for breakfasts, burgers and fast-paced service line work.Why operators choose the GG-24
Two heavy-duty u-shape burners — 30 MJ/h each (60 MJ/h total) for even heat across the full plate.
22 mm mild-steel cooking plate — holds heat and recovers fast under continuous load.
Flame-failure safety system — cuts gas automatically if a burner goes out.
Stainless steel construction — splashback plus three-sided splash guard for easy clean-down.
Front grease channel and stainless collector — keeps the bench clean and simplifies waste removal.
Specifications
Brand
GasMax
Model / MPN
GG-24
Type
Benchtop Gas Griddle
Fuel
Natural Gas
Burners
2 (u-shape, 30 MJ/h each)
Gas output
60 MJ/h
Cooking plate
22 mm mild steel
Construction
Stainless Steel
Safety
Flame-failure device
Gas connection
3/4-inch rear
Product dimensions
610(W) x 824(D) x 546(H)mm
Packed dimensions
750(W) x 890(D) x 520(H)mm
Net weight
80 kg
Country of manufacture
China
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: Suited to cafes, food trucks, pubs, takeaways and commercial kitchens that need a compact, high-output griddle on the cookline. It sits alongside the rest of our Griddles range and the wider GasMAX benchtop line-up for matching cooking stations.Installation & delivery: Connects to natural gas via a 3/4-inch rear inlet and can be field-converted to LPG; installation must be carried out by a licensed gasfitter. Dispatched Australia-wide.Frequently asked questionsDoes the GG-24 run on natural gas or LPG? It ships configured for natural gas and includes an in-field conversion option for LPG. Conversion and installation should be done by a licensed gasfitter.How many burners does it have and what is the gas output? Two heavy-duty u-shape burners rated 30 MJ/h each, for 60 MJ/h total.How thick is the cooking plate? The cooking surface is a 22 mm heavy-duty mild-steel plate for strong heat retention and fast recovery.What safety features are included? Each burner has a flame-failure device that shuts off the gas supply automatically if the flame is extinguished.What warranty does it come with? Two years parts and labour, plus an additional two years parts only when the product is registered within 14 days of invoice.
GASMAX Benchtop 2 Bunner Griddle 600mm - JUS-TRG60LPG Stainless Steel Construction Drip Tray Auto Ignition Flame Failure Shut-Off LPG Gas 36mj/h ½” Gas Inlet Consumption: 42MJ/h * Gas Equipment Must Be Commissioned By An Authorised F.E.D. Technician. Call 1300 887 055 To Arrange. 2 Years Parts and Labour + 2 Years Parts only Warranty with Product RegistrationPower: 42MJ/h; ½” gas inlet
Compact and exceptionally powerful, the heavy duty freestanding LPG Thor griddle provides the ideal robust griddle surface, whilst the slim line design ensures that the griddle can fit into kitchens with limited space.Controlled by a precise durable dial thermostat, all manner of foods can be cooked perfectly and with minimum down time, thanks to the removable waste tray and polished steel cooking surface. Fitted with flame failure protection as standard. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 377(W) x 510(D)mm Material Stainless Steel Power Type LPG Warranty 2 Years Weight 58kg Polished steel cooking surface Manually controlled, Independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet 3/4" rear gas connection Optional: Individual pilot, flame failure and piezo ignition Optional: Full size back flue guard AGA approved
A heavy duty freestanding natural gas griddle with flame failure protection, made from robust stainless steel and featuring independent cooking zones that are manually controlled for flexible use.Has large, robust dial controls, burner safety valves, a removable waste tray and hardwearing adjustable feet for easy manoeuvrability and operation. Supplied with stand.Please ensure this product is installed by qualified commercial gas fitter, as failure to do so will result in warranty being voided. Product features Dimensions 942(H) x 610(W) x 835(D)mm Dimensions - cooking area 606(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Supplier Model Number TR-G24F-NG(A) Warranty 2 Years Weight 82kg Manually controlled, independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet Flame failure protection AGA approved 3/4" rear gas connection SAI Global Approval for AS4563-2004 certificate SAI-400043 issued 17th Jan 2014 Supplied with stand
Compact yet powerful, the heavy duty freestanding natural gas Thor griddle provides the ideal robust griddle surface, whilst the slim line design ensures that the griddle can fit into kitchens with limited space. Controlled by a precise durable dial thermostat, all manner of foods can be cooked perfectly and with minimum down time, thanks to the removable waste tray and polished steel cooking surface. Fitted with flame failure protection as standard. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 377(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Warranty 2 Years Weight 58kg Polished steel cooking surface Manually controlled, Independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet 3/4" rear gas connection Optional: Individual pilot, flame failure and piezo ignition Optional: Full size back flue guard AGA approved
A high quality, heavy duty natural gas griddle, featuring a flame failure protection and independent cooking zones for exceptional control and safety.Made from robust stainless steel, it also features burner safety valves, a removable waste tray and adjustable feet. Supplied with stand.Please ensure this product is installed by qualified commercial gas fitter, as failure to do so will result in warranty being voided. Product features Dimensions 1175(H) x 915(W) x 835(D)mm Dimensions - cooking area 911(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Supplier Model Number TR-G36F-NG(A) Warranty 2 Years Weight 118kg Manually controlled, independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet Flame failure protection AGA approved 3/4" rear gas connection SAI Global Approval for AS4563-2004 certificate SAI-400043 issued 17th Jan 2014 Supplied with stand
The GasMax RGT-16ELPG is a single-burner LPG gas griddle that gives compact cooklines a high-output flat-top for breakfast service, burgers, eggs and teppanyaki-style cooking on a 404mm-wide benchtop footprint.Why operators choose the RGT-16ELPG
27 MJ/h single burner — strong, even heat for fast searing and recovery on a compact plate.
20mm heavy-duty mild steel plate — thick cooking surface that holds temperature under continuous load.
Cast-iron H-shape burner — spreads heat across the plate for consistent results edge to edge.
Flame-failure safety with ignition — easy start and automatic gas cut-off if the flame goes out.
Front oil collector and removable plate — quick clean-down at the end of service.
Specifications
Brand
GasMax
Model / MPN
RGT-16ELPG
Type
Gas Griddle
Gas type
LPG
Gas output
27 MJ/h
Burners
1
Plate
20mm heavy-duty mild steel, removable
Gas connection
3/4-inch rear
Construction
Stainless steel front and sides, adjustable heavy-duty legs
Product dimensions
404(W) x 840(D) x 429(H) mm
Packed dimensions
410(W) x 870(D) x 370(H) mm
Net weight
69 kg
Country of manufacture
China
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: The compact 404mm footprint suits cafes, food trucks, takeaways and bar kitchens that need a flat-top griddle without sacrificing bench space, and pairs with the GasMax QR-16-SE stand for a freestanding setup.Browse the full range of commercial Griddles or see more LPG and natural-gas cooking equipment from GasMAX to build out your cookline.Installation & delivery: Supplied with a 3/4-inch rear gas connection for LPG; commissioning by a licensed gasfitter is recommended. Dispatched Australia-wide.Frequently asked questionsWhat gas does the RGT-16ELPG run on? It is an LPG model, rated at 27 MJ/h, with a 3/4-inch rear gas connection.How thick is the cooking plate? The griddle has a 20mm heavy-duty mild steel plate that retains heat well for searing and high-volume cooking.Does it have any safety features? Yes — it uses a cast-iron H-shape burner with a flame-failure system and ignition for safe, easy starting.What are the dimensions? The unit measures 404(W) x 840(D) x 429(H) mm and weighs 69 kg net.Is a stand available? Yes — it is compatible with the GasMax QR-16-SE stand for a freestanding configuration.
The GasMax RGT-16E is a single-burner gas griddle top that gives a cafe, takeaway or commercial kitchen a compact natural-gas flat-top cooking surface for breakfasts, burgers, eggs and grilled service.Why operators choose the RGT-16E
28 MJ/h natural gas burner — strong, even heat for fast cook-through and quick recovery.
20mm heavy-duty mild-steel plate — holds heat and resists warping under continuous service.
Cast-iron H-shape burner — spreads flame across the plate for more uniform temperature.
Flame-failure safety with ignition — cuts gas if the flame goes out and starts at the turn of a knob.
Stainless front and sides with adjustable legs — wipes down fast and levels on any benchtop.
Specifications
Brand
GasMax
Model / MPN
RGT-16E
Type
Griddle (single burner, benchtop)
Fuel
Natural Gas
Gas output
28 MJ/h
Burners
1
Cooking plate
20mm heavy-duty mild steel
Gas connection
3/4-inch rear
Construction
Stainless steel front and sides
Safety
Flame-failure device with ignition
Product dimensions
404(W) x 840(D) x 429(H)mm
Packed dimensions
410(W) x 870(D) x 370(H)mm
Net weight
69 kg
Country of manufacture
China
Warranty
2 years parts & labour + 2 years parts only with product registration within 14 days of invoice
Venue suitability: Ideal for cafes, breakfast bars, food trucks, takeaways and back-of-house prep where a compact, single-burner gas flat-top suits the volume and bench space.Browse the rest of the range in our Griddles collection, or see the full GasMAX line-up for matching gas cooking equipment.Installation & delivery: Supplied as a benchtop unit for connection to a natural-gas supply by a licensed gasfitter; a matching stand is available separately. Dispatched Australia-wide.Frequently asked questionsIs the RGT-16E natural gas or LPG? It is the natural-gas model. A separate LPG variant (RGT-16ELPG) is available if you need bottled gas.What is the gas output? The single burner delivers 28 MJ/h.How thick is the cooking plate? The griddle uses a 20mm heavy-duty mild-steel plate for strong heat retention.Does it have a flame-failure safety device? Yes — the burner has a flame-failure system that shuts off the gas if the flame is extinguished, plus push-button ignition.Is a stand included? No — it is a benchtop griddle top. A compatible GasMax stand is sold separately.
The GasMax GG-12 is a single-burner natural gas griddle top that gives cafés, takeaways and food trucks a compact flat-top cooking surface for breakfasts, burgers and grilled service in a tight benchtop footprint.Why operators choose the GG-12
30 MJ/h heavy-duty burner — a single U-shape steel burner spreads heat evenly across the plate for consistent cooking.
22mm mild-steel plate — thick cooking surface holds temperature and resists warping under continuous service.
Flame failure protection — cuts the gas automatically if the flame goes out, for safer day-long operation.
Front grease channel & oil collector — scrapes waste into a removable stainless steel tray for fast cleandown.
Field-convertible gas — brass control valve and 3/4" rear connection, convertible in the field if your gas supply changes.
Specifications
Brand
GasMax
Model / MPN
GG-12
Type
Benchtop Gas Griddle
Fuel
Natural Gas
Burners
1
Gas output
30 MJ/h
Gas connection
3/4" rear
Plate
22mm mild steel
Construction
Stainless Steel
Product dimensions
336(W) x 824(D) x 546(H)mm
Packed dimensions
440(W) x 890(D) x 520(H)mm
Net weight
45 kg
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: Ideal for cafés, sandwich bars, food trucks and small commercial kitchens that need a reliable flat-top in minimal bench space. Browse the full range of commercial griddles or see more GasMax cooking equipment to build out your cookline.Installation & delivery: Requires connection to a natural gas supply by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsDoes the GG-12 run on natural gas or LPG? The GG-12 is the natural gas model. GasMax offers a separate LPG version (GG-12LPG) if your site runs on bottled gas.How powerful is the burner? It uses a single heavy-duty U-shape burner rated at 30 MJ/h, designed to distribute heat evenly across the griddle plate.How thick is the cooking plate? The cooking surface is a 22mm heavy-duty mild-steel plate, which holds heat well and resists warping during long service.Does it have a flame failure safety device? Yes — a flame failure system shuts off the gas automatically if the flame is extinguished.What warranty does it come with? It carries 2 years parts and labour, plus an additional 2 years parts-only cover when the product is registered within 14 days of invoice.
The Fagor Kore 700 FT-G710CL is a bench-top natural-gas griddle built for cafes, pubs and high-turnover commercial kitchens that need a dependable flat-top without sacrificing counter space. It delivers 50 MJ/h (15 kW) across two independent burners onto an 800 mm wide, 50-micron hard-chrome cooking surface, with thermostatic control from 100 to 300°C for precise, repeatable results. The chrome plate releases food cleanly and the electronic spark igniter means the unit runs on gas alone — no electrical connection required.
Why operators choose the FT-G710CL
50 MJ/h / 15 kW across two burners — high power with rapid heat recovery, so the plate holds temperature through back-to-back breakfast and lunch rushes.
50-micron hard-chrome cooking surface — releases eggs, pancakes and delicate proteins cleanly, reduces sticking and wipes down faster than a bare steel plate.
Thermostatic control, 100–300°C — dial in an exact temperature for consistent searing and gentle holding across the shift.
No electricity required — electronic spark ignition lets the griddle run on gas alone, simplifying install and keeping it working during power interruptions.
Ceramic-stone heat shield — shields the burners from fat drips, prevents flare-ups and spreads heat evenly across the plate.
AISI-304 stainless body with rounded edges — hard-wearing, corrosion-resistant and quick to clean down between services.
Front-tilted plate and 2 L grease tray — channels fat and liquids forward into a removable tray for tidy, low-fuss waste handling.
IPX5 water protection and front access — stands up to wash-down routines and keeps components serviceable from the front.
Specifications
Brand
Fagor
Model
Kore 700
MPN
FT-G710CL
SKU
FT-G710CL
Type
Bench-top gas griddle (chrome plate)
Fuel
Natural gas
Power
50 MJ/h (15 kW)
Burners
2
Temperature range
100–300°C (thermostatic)
Ignition
Electronic spark igniter (no electrical supply required)
Cooking surface
50-micron hard-chrome plate
Grease tray capacity
2 L
Water protection
IPX5
External material
AISI-304 stainless steel
Dimensions (W x D x H)
800 x 730 x 290 mm
Packed dimensions (W x D x H)
822 x 840 x 535 mm
Weight
146 kg
Packed weight
168 kg
Country of manufacture
Spain
Warranty
2 years parts and labour, plus 2 years parts only with product registration within 14 days of invoice
Venue suitability
The 800 mm chrome plate and 50 MJ/h output suit cafes, breakfast venues, pubs and food trucks running sustained griddle service — burgers, eggs, pancakes and vegetables — where fast recovery and a clean-release surface matter. The compact bench-top footprint fits tight cooklines and counters. It is less suited to operations needing a built-in fryer or grooved char-marking, where a dedicated chargrill or combination unit would be the better fit.
Browse more options in our benchtop gas griddles range or see the full Fagor cooking line-up.
Installation & delivery
This is a natural-gas appliance and must be installed by a licensed gas fitter, with clearance to combustibles per the manufacturer instructions; it needs no electrical connection thanks to the spark igniter. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by 2 years parts and labour, extending to 4 years on parts with product registration within 14 days of invoice.
Frequently asked questions
What is the power output of the Fagor FT-G710CL?It produces 50 MJ/h (15 kW) across two independent burners, giving high heat and fast recovery so the 800 mm chrome plate holds temperature through busy breakfast and lunch service.
Does this griddle need an electrical connection?No. The FT-G710CL uses an electronic spark igniter and runs on natural gas alone, so it requires only a gas connection and continues working during power interruptions.
What is the difference between a chrome plate and a standard steel griddle?The 50-micron hard-chrome surface releases food more cleanly, reduces sticking on delicate items like eggs and wipes down faster than bare mild steel. Our complete guide to commercial griddles explains the plate-type trade-offs.
What temperature range does it cook at?Thermostatic control sets the plate anywhere from 100 to 300°C, letting you sear at high heat or gently hold and cook delicate items with consistent, repeatable results.
What size kitchen does it suit and does it need a hood?Its 800 x 730 x 290 mm bench-top footprint fits tight cooklines, and like all gas griddles it should sit under appropriate extraction. Our guide on countertop griddle venting and hood options covers the requirements for small kitchens.
How is grease managed during service?The cooking surface tilts towards the front, channelling fat and liquids into a removable tray that holds up to 2 litres, and a scraper is included as standard with the chrome model for fast clean-down.
What warranty does the FT-G710CL carry?It comes with 2 years parts and labour, plus an additional 2 years parts only when you register the product within 14 days of the invoice date — up to 4 years of parts cover in total.
