Markup0

The AG Equipment GNX4100TN is a 4 door under bench storage fridge that puts 553 litres of refrigerated storage at worktop height for busy commercial kitchens, pubs and bars. Four solid stainless-steel doors open to two adjustable wire shelves each, holding a positive +2°C to +8°C across the whole cabinet. Why operators choose the GNX4100TN 553 L across 4 doors — eight adjustable wire shelves (two per door) flex around trays, tubs and GN pans during service. Front-and-side ventilation (X-series) — dual fans free the rear so the cabinet can sit flush to the wall; only 150mm clearance is needed at the side and front. R290 natural refrigerant — non-toxic, ozone-friendly and efficient, helping cut running costs. Built for hot kitchens — stainless body holds temperature in ambient conditions up to 43°C with fan-forced ventilated cooling. Mobile and serviceable — pre-fitted castor wheels, self-closing doors, internal LED lighting and a CAREL digital controller. Specifications Brand AG Equipment Model / MPN GNX4100TN Type Under Bench Storage Fridge Capacity 553 L Doors 4 (solid stainless steel) Shelves 8 adjustable wire shelves (2 per door) Temperature range +2°C to +8°C Ambient rating 43°C / 65% humidity Cooling Fan-forced ventilated Refrigerant R290 / 90g Power 490W; 220–240V; 50Hz; 3.2A Energy consumption 7.5 kWh/24h Plug 10A, single phase Material Stainless steel Product dimensions 2230(W) x 700(D) x 850(H)mm Internal dimensions 1670 x 580 x 560mm Packed dimensions 2275(W) x 750(D) x 880(H)mm Net weight 137 kg Shipping weight 164 kg Warranty 24 months parts & labour Venue suitability: Ideal for pubs, restaurants, bars and cafe production lines that need high-volume cold storage built into the bench line, where the worktop doubles as prep space above and the 43°C ambient rating suits hot, busy service areas. Browse the full range of Under Bench Storage Fridges or see more refrigeration from AG Equipment to compare door counts and footprints. Installation & delivery: Allow 150mm clearance at the side and front for ventilation; the rear can sit flush to the wall. Clean the condenser filter monthly for best performance. Dispatched Australia-wide. Frequently asked questions How many litres is the GNX4100TN? It holds 553 litres across four solid doors, each with two adjustable wire shelves. What temperature range does it hold? It runs as a positive fridge between +2°C and +8°C with electronic temperature control. Can it sit against the wall? Yes - the X-series uses front-and-side ventilation, so the rear can sit flush while you leave 150mm clear at the side and front. What refrigerant does it use? It uses R290, a natural, non-toxic and ozone-friendly hydrocarbon refrigerant with a 90g charge. What warranty does it come with? It is backed by a 24-month parts and labour warranty.

Read more less

The Thermaster LG-1200P is a 1000L two-glass-door Colourbond upright drink fridge built for high-volume beverage display in commercial hospitality, retail, and supermarket environments. Its large net capacity, fan-forced evaporator cooling, and R290 natural refrigerant deliver consistent chilled performance across a wide ambient temperature range. Why operators choose the LG-1200P 1000L net capacity — substantial storage across five adjustable shelf levels, suited to restaurants, bars, and supermarkets holding large beverage stock R290 natural refrigerant — CFC-free and low-GWP, meeting current AU environmental standards with a 6-Star GEMS energy rating Fan-forced evaporator cooling — consistent temperature throughout the cabinet with automatic defrost and self-evaporating condensate drainage Double-glazed self-closing glass doors with locks — maximum product visibility while maintaining thermal efficiency and security LED lighting and illuminated canopy — high-visibility product presentation with a separate on/off switch for energy control Specifications Brand Thermaster Model / MPN LG-1200P Type Upright Display Fridge Capacity (Net) 1000 L Capacity (Gross) 1075 L Doors 2 Door Type Hinged, Double-Glazed Glass Temperature Range +2 to +8°C Max Ambient Temperature 38°C, 65% RH Refrigerant R290 Natural Refrigerant GEMS Star Rating 6 Cooling Type Fan Forced Evaporator Power 240V / 480W / 10A Power Type Electric Daily Energy Consumption 4.41 kWh/24h External Width 1330 mm External Depth 690 mm External Height 2079 mm Body Material Colourbond Net Weight 132 kg (see note) Packed Dimensions 1360(W) x 740(D) x 2110(H) mm Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice) Venue suitability: The LG-1200P is ideal for bars, restaurants, cafes, supermarkets, and bottle shops requiring a large-format upright drink fridge with maximum product visibility. Its 38°C ambient temperature rating makes it suitable for warm Australian kitchen and front-of-house environments. Browse our full range of Upright Display Fridges or explore more from Thermaster. Installation & delivery: The LG-1200P arrives on heavy-duty castors (2 with brakes) for easy positioning. Ensure floor clearance for front bottom ventilation. For warranty terms, visit our warranty information page. Dispatched Australia-wide. Frequently asked questions What is the net storage capacity of the LG-1200P?The net storage capacity is 1000 litres across five adjustable shelving levels. The gross internal volume is 1075 litres. What refrigerant does the LG-1200P use?It uses R290, a natural hydrocarbon refrigerant that is CFC-free and has a very low global warming potential, helping meet current AU environmental standards. What is the operating temperature range?The LG-1200P maintains a temperature range of +2 to +8°C, suitable for chilled beverages, dairy, and fresh food display. What power supply does the LG-1200P require?The unit runs on a standard 240V / 10A single-phase supply, drawing 480W. No special electrical installation is required beyond a standard commercial power outlet. Does the LG-1200P come with a warranty?Yes — it includes 2 Years Parts and Labour plus an additional 2 Years Parts Only cover, provided the product is registered within 14 days of invoice date.

Read more less

The Modular Systems SSB6-1200L/A is a 1200mm stainless steel single sink bench with left-positioned bowl and pot undershelf, designed for commercial kitchen wash-up and prep areas where workflow runs left-to-right or a clear draining surface is needed to the right of the sink.Why operators choose the SSB6-1200L/A Left bowl layout — sink bowl positioned on the left side of the 1200mm bench, with a full-width draining and prep surface to the right for efficient left-to-right dish flow. 304-grade (18/8) SUS304 benchtop — 1.2mm stainless steel lined with 15mm XPS board and an S/S panel, with U-channel reinforcements underneath for a rigid, non-flex work surface with ripple finish. Fully welded, polished sink bowl — 400mm W × 400mm D × 300mm H bowl with a 90mm Ø drain hole and 15mm wet edge; polished inside and out to resist build-up and ease cleaning. Stainless pot undershelf included — 1.2mm S/S (18/8) tubular undershelf with 38mm outer frame and 25mm inner tubes at 40mm spacing provides storage for pots, pans, and bulky equipment directly below the bench top. Flat-pack with instruction manual & tools — reduces freight damage and speeds up on-site installation; four fully adjustable stainless disc feet level the bench on uneven floors. Optional leg brace available instead of pot shelf — specify on order. Specifications Brand Modular Systems Model / MPN SSB6-1200L/A Type Single Sink Bench — Left Bowl Width 1200mm Depth 600mm Height 900mm Sink Bowl Size 400mm W × 400mm D × 300mm H Bowl Position Left Drain Hole 90mm Ø Wet Edge 15mm Benchtop Material 1.2mm SUS304 (18/8) stainless steel, XPS board lined, U-channel reinforced, ripple surface Undershelf 1.2mm S/S (18/8) tubular pot undershelf; 38mm Ø outer frame, 25mm inner tubes at 40mm spacing Legs 4 × 1.2mm S/S, 42mm Ø, fully adjustable polished disc feet Splashback Stainless steel, 150mm high, 40mm thick, bevelled, fully enclosed Net Weight 30.3 kg Packed Dimensions 1270(W) × 670(D) × 530(H)mm Country of Manufacture China Warranty 2 Years Parts Only Venue suitability: Suited to commercial kitchens, restaurants, cafés, catering operations, aged-care facilities, and school canteens requiring a compact 1200mm left-bowl sink station. Browse the full range in Commercial Stainless Steel Sinks or explore all Modular Systems stainless steel equipment.Installation & delivery: Supplied flat-packed with instruction manual and assembly tools. Four fully adjustable stainless disc feet for levelling on uneven surfaces. Optional leg brace available as an alternative to the pot undershelf — specify on order. Castor kits available separately (lockable). Dispatched Australia-wide.Frequently asked questionsWhat does “left sink bench” mean?The sink bowl is positioned on the left side of the 1200mm bench, with the main draining and prep surface to the right. This suits kitchens where the dish-flow runs left to right, from washing to draining to storage.What are the sink bowl dimensions?The bowl measures 400mm wide × 400mm deep × 300mm high with a 90mm Ø drain hole. The bowl is fully welded and polished inside and out, with a 15mm wet edge to contain spills.Is a splashback included?Yes. A 150mm high, 40mm thick bevelled stainless steel splashback is included, fully enclosed and wall-ready.How does the bench arrive and how long does installation take?The SSB6-1200L/A is supplied flat-packed (packed dimensions 1270 × 670 × 530mm) with an instruction manual and all required assembly tools. Most operators complete assembly in under an hour.Can I get a leg brace instead of the pot undershelf?Yes. A leg brace is available free of charge as an alternative to the pot undershelf — specify your preference when placing your order.

Read more less

Sunmixer Deck Mounted Faucet with 2 side-handles T20138 Key Features Water Efficiency Star Rating: ★★★★ Deck mounted type 2 sde-handles Can connect to both hot water and cold water Warranty: 2 Years Parts Only Certified Product Power:

Read more less

The Modular Systems DSB6-1500L/A is a commercial double left sink bench with pot undershelf, built from 304-grade stainless steel (SUS304 18/8) for demanding kitchen environments. At 1500mm wide with two left-positioned bowls and a right-hand draining area, it handles the heavy washing loads of busy hospitality and food-service operations. Why operators choose the DSB6-1500L/A SUS304 (18/8) stainless steel benchtop — 1.2mm thick, XPS-board lined with 15mm wet edge for durability and hygiene Two fully welded left bowls — 400 x 400 x 300mm each, polished inside and out, with 90mm drain hole per bowl Integrated splashback — 150mm high, 40mm thick, bevelled and fully enclosed Pot undershelf included — 38mm outer frame tubes with 25mm inner tubes at 40mm spacing; optional leg brace available on request Adjustable stainless steel disc feet — 42mm diameter legs (1.2mm SS), fully adjustable for uneven floors; castor kits available Flat-packed with tools and manual — quick assembly design reduces on-site setup time Specifications Brand Modular Systems Model / MPN DSB6-1500L/A Type Double Sink Bench Width 1500 mm Depth 600 mm Height 900 mm (+ 150mm splashback) Bowl Count 2 Bowl Position Left Bowl Size 400mm W x 400mm D x 300mm H Drain Hole Diameter 90 mm Material SUS304 (18/8) Stainless Steel Steel Thickness 1.2 mm Splashback Height 150 mm Splashback Thickness 40 mm Leg Diameter 42 mm (1.2mm SS) Net Weight 36.4 kg Product Dimensions 1500(W) x 600(D) x 900(H)mm Packed Dimensions 1570(W) x 670(D) x 530(H)mm Packed Weight 52 kg Warranty 2 Years Parts Only Venue suitability: Ideal for commercial kitchens, cafe preparation areas, catering facilities, school canteens, and any food service workspace requiring dedicated washing and prep zones with pot storage beneath. Browse our full range of Commercial Stainless Steel Sinks or explore the complete Modular Systems range for compatible benches and shelving. Installation & delivery: Supplied flat-packed with instruction manual and all assembly tools. Simply assemble on-site with no specialist trades required. Dispatched Australia-wide. Frequently asked questions What is the bowl size on the DSB6-1500L/A?Each of the two bowls measures 400mm wide x 400mm deep x 300mm high, with a 90mm drain hole. This is the 600mm bench-depth configuration. Is assembly required, and what tools are needed?Yes — the bench ships flat-packed for safe transport. All assembly tools and an instruction manual are included in the carton. No specialist trades are required. Can I get a leg brace instead of the pot undershelf?Yes. A free optional leg brace can replace the pot undershelf. Specify leg brace on your order if required. What is the warranty on this sink bench?The DSB6-1500L/A carries a 2-year parts-only warranty from Modular Systems. Is the stainless steel grade food-safe?Yes — the benchtop and bowls are constructed from SUS304 (18/8) stainless steel, the standard grade for commercial food-service applications. Bowls are fully welded and polished inside and out for hygiene and easy cleaning.

Read more less

The Modular Systems WB6-0600/A is a stainless steel flat workbench designed for commercial kitchens requiring a durable, self-assembly prep surface. Built from SUS304 (18/8) stainless steel throughout, it is supplied flat-packed with all tools and an instruction manual for quick on-site assembly. Why operators choose the WB6-0600/A 304-grade stainless steel top — 1.2mm SUS304 (18/8) benchtop lined with 20mm XPS board and a stainless steel panel for rigidity and hygiene compliance. Adjustable undershelf — 1.2mm stainless shelf with U-channel reinforcements; height is fully adjustable to suit varied storage needs. Robust leg system — 42mm diameter, 1.2mm stainless steel legs with fully adjustable polished disc feet; lockable castor kits available separately. High load rating — rated to 240kg for the 600mm-wide model, scaling to 480kg for the 2400mm-wide bench. Flat-packed for easy transport — includes instruction manual and tools; leg brace option available instead of solid shelf on request. Specifications Brand Modular Systems Model / MPN WB6-0600/A Type Stainless Steel Flat Bench Width 600 mm Depth 600 mm Height 900 mm Benchtop Material SUS304 (18/8) Stainless Steel, 1.2mm Benchtop Construction Lined with 20mm XPS board & stainless panel; U-channel reinforcements beneath Leg Diameter 42 mm Leg Thickness 1.2 mm stainless steel Feet Fully adjustable polished stainless disc feet Undershelf Stainless steel 1.2mm; fully adjustable height; U-channel reinforcements Load Rating (600mm wide) 240 kg Load Rating (900mm wide) 280 kg Load Rating (1200mm wide) 320 kg Load Rating (1500mm wide) 360 kg Load Rating (1800mm wide) 400 kg Load Rating (2100mm wide) 440 kg Load Rating (2400mm wide) 480 kg Net Weight (600mm wide) 22 kg Packed Dimensions 1270(W) x 670(D) x 185(H)mm Warranty 2 Years Parts Only Country of Manufacture China Venue suitability: Ideal for commercial kitchens, bakeries, cafes, restaurants, and catering operations requiring a hygienic, heavy-duty stainless prep bench. The flat/plain work surface suits prep, plating, and general kitchen workflow. Browse our full range of Stainless Steel Benches or explore more from Modular Systems. Installation & delivery: Supplied flat-packed with all assembly tools and instruction manual. Optional leg brace (instead of solid undershelf) available — specify on purchase order. Dispatched Australia-wide. Frequently asked questions What steel grade is the benchtop?The benchtop is SUS304 (18/8) stainless steel at 1.2mm thickness, the same food-safe grade used across commercial kitchen equipment. Can I get a leg brace instead of the solid undershelf?Yes. Modular Systems offers a free optional leg brace in place of the solid undershelf — simply specify "leg brace" on your purchase order when ordering. How many legs does this bench have?The 600mm-wide WB6-0600/A has 4 legs. Wider models (2100mm and 2400mm) ship with 6 legs for extra support. Can I add castors or extra shelves later?Yes. Lockable castor kits and additional shelves are available as optional accessories. Contact us for compatible part numbers. What is the warranty on this workbench?The WB6-0600/A carries a 2-year parts-only warranty from Modular Systems.

Read more less

High capacity complete Water Filter System – 450mm cartridge Suitable for between 80kg to 250kg production ice machinesProduct Dimensions: 105(W) x 120(D) x 540(H)mm

Read more less

The Modular Systems WBBD7-0600R/A is a 600mm all-stainless-steel dishwasher outlet bench with a right-side outlet configuration, purpose-built for commercial kitchens requiring a clean, efficient dishwashing station. Constructed from 1.2mm SUS304 (18/8) stainless steel throughout, it arrives flat-packed with all tools and an instruction manual for quick on-site assembly.Why operators choose the WBBD7-0600R/A Right-side outlet positioning — when facing the bench, the dishwasher outlet is on the right, making it easy to integrate into an existing conveyor or undercounter dishwasher run. 304-grade stainless throughout — 1.2mm SUS304 (18/8) body, benchtop, legs, and splashback resist corrosion and comply with food-safe surface requirements. Integrated 180mm splashback — 30mm-thick bevelled, fully enclosed rear guard keeps walls clean and meets kitchen hygiene codes. Reinforced benchtop — XPS board with 15mm lining and S/S 'U'-channel reinforcements underneath for rigidity across the full 600mm span. Adjustable disc feet — fully adjustable S/S polished disc feet on 42mm Ø legs level the bench on uneven floors; optional lockable castor kits available. Specifications Brand Modular Systems Model / MPN WBBD7-0600R/A Type Stainless Steel Dishwasher Sink & Bench Width 600mm Depth 700mm Height 900mm Net Weight 20.3 kg Material 304 Stainless Steel (SUS304 18/8), 1.2mm gauge Dishwasher Side Right outlet (outlet on right when facing bench) Splashback Height 180mm Splashback Thickness 30mm, bevelled, fully enclosed Leg Diameter 42mm Ø Leg Material 1.2mm Stainless Steel, adjustable polished disc feet Leg Count 4 Benchtop Lining XPS board 15mm with S/S panel; S/S U-channel reinforcements Assembly Flat-packed; instruction manual & tools included Packed Dimensions 770(W) x 670(D) x 275(H)mm Warranty 2 Years Parts Only Country of Manufacture China Venue suitability: Ideal for cafés, restaurants, institutional kitchens, and catering operations with conveyor or undercounter dishwashers. The 600mm footprint suits tighter kitchens where a compact, dedicated outlet bench is required without compromising hygiene or workflow.Explore our range of Dishwasher Inlet Sinks & Outlet Benches or browse all Modular Systems stainless steel equipment.Installation & delivery: Supplied flat-packed for ease of transport and assembly. Includes instruction manual and all required tools. Dispatched Australia-wide.Frequently asked questionsWhat does 'right outlet' mean?When standing and facing the bench, the dishwasher connection outlet is positioned on the right side. This determines which direction dishes flow off the dishwasher onto the bench.Is the bench supplied with a sink bowl?The WBBD7-0600R/A is a dishwasher outlet bench — it features an angled benchtop drain outlet rather than a separate sink bowl. Confirm with your supplier if a combined sink-inlet bench is required.Can I add castors instead of fixed feet?Yes — optional lockable castor kits are available for this bench, allowing repositioning during cleaning.What gauge stainless steel is used?All structural components — benchtop, legs, and splashback — are 1.2mm SUS304 (18/8) stainless steel.Is the bench easy to assemble?Yes. The bench arrives flat-packed and is designed for quick assembly. An instruction manual and all necessary tools are included in the box.

Read more less

Bonvue Angled Countertop Wet and Dry Bain Marie BM17TC Key Features Fits 5x 1/1GN or double row ½ GN pan (Pans not included) Machine can operate as dry and wet bain marie Temperature range: +35 to +85 Pan divider included Can take pan up to 100mm deep Warm White Light with stainless steel light cover and separate switch Enhances food presentation whilst keeping food at correct serving temperature 304 Grade Stainless steel construction with tubular frame Italian heating element Safety lock ball valve drain at the back Analogue temperature control Temperature Reach Indication light Analogue temperature display Max water level line sign in tank Streamlined for easy cleaning Overhead heating lamps Rear tempered 5mm glass sliding door 8mm tempered glass cover Optional trolley also available: please see BMT models Warranty: 2 Years Parts & Labour Plus 2 Years Parts Only Warranty When Products Registered Within 14 Days Of InvoicePower: 3301W/15A

Read more less

The Modular Systems DSC-1800R-H is a stainless steel kitchen tidy cabinet that combines a double-bowl right-hand sink with enclosed storage to keep busy commercial kitchens clear of clutter. Bowls, doors and drawers are built into a single 1800mm pre-assembled unit with all-welded joins. Why operators choose the DSC-1800R-H 304 (18/8) stainless construction — 1.2mm top and frame with a hairline finish for a hard-wearing, hygienic surface. Two right-hand sink bowls — 450 x 450 x 300mm 'punched' bowls with a 90mm drain hole for fast prep and wash-up. Integrated storage — sliding doors plus a bank of drawers hide clutter and free up bench space. 150mm rear splashback — protects the wall and keeps the work zone tidy. Pre-assembled, all-welded joins — arrives ready to position with no on-site assembly. Specifications Brand Modular Systems Model / MPN DSC-1800R-H Type Stainless Steel Cabinet Sink configuration Two right-hand bowls Bowl size 450 x 450 x 300mm Drain hole 90mm dia. Material 304 (18/8) Stainless Steel Top & frame gauge 1.2mm Doors & drawers gauge 0.9mm Finish Hairline Splashback 150mm rear Product dimensions 1800(W) x 700(D) x 1050(H)mm Package dimensions 1820(W) x 720(D) x 1130(H)mm Construction Pre-assembled, all-welded joins Country of manufacture China Warranty 2 Years Parts Only Venue suitability: Suited to open-plan and front-of-house commercial kitchens, cafes and bars where wash-up and concealed storage need to sit in one tidy stainless unit. It is a natural fit alongside our Commercial Kitchen Cabinets range and the wider Modular Systems stainless line. Installation & delivery: Arrives pre-assembled with all-welded joins, ready to position and connect to existing plumbing. Dispatched Australia-wide. Frequently asked questions What grade of stainless steel is used? The top and frame are 1.2mm 304 (18/8) stainless steel with a hairline finish, and the doors and drawers are 0.9mm stainless. How many sinks does it have and which side? It has two bowls positioned on the right-hand side of the unit, each 450 x 450 x 300mm with a 90mm drain hole. What are the overall dimensions? The cabinet is 1800mm wide, 700mm deep and 1050mm high overall, which includes a 150mm rear splashback. Does it require assembly? No. The cabinet is supplied pre-assembled with all-welded joins, so it only needs positioning and plumbing connection. What warranty is included? The DSC-1800R-H comes with a 2 Years Parts Only warranty.

Read more less

Asber Tech Line Underbench Dishwasher - GE-500BDD Key Features: Electronic control panel 3 washing cycle of 90” / 120” /180” 30 Baskets / hour Tank capacity: 25L / Heating power: 2.8 kw Boiler capacity: 7L / Heating power: 2.8 kw Wash pump power: 0.6 kw Rinsing consumption: 2.7L / rinse Upper and lower washing and rinsing arms Stainless-steel washing arms Thermostop function Soft washing start Wash tank and boiler temperature display Built-in rinse aid dispenser Anti backflow valve fitted Safety thermostat in washing tank and boiler Temperature adjustement: Wash 60 ºC and rinse 85 ºC Built-in rinse aid dispenser, detergent aid dispenser and draining pump Accessories supplied: 2 x 500x500 dishwasher basket and 1 cutlery basket Door clearance: 320mm Two Years Parts and Labour WarrantyPower: 240; 3.4kW/15A

Read more less

The Modular Systems WBBD7-0600L/A is a 600mm stainless steel dishwasher outlet bench designed to sit on the exit side of a commercial passthrough dishwasher. The left-hand outlet lip channels clean dishware away from the machine, while the 180mm stainless splashback protects the wall and keeps the workspace hygienic. Why operators choose the WBBD7-0600L/A 304-grade (SUS304 18/8) benchtop — food-safe, corrosion-resistant stainless rated for commercial wash environments 1.2mm gauge throughout — consistent construction on benchtop, splashback, and legs for long service life Left-hand outlet configuration — clean dishware exits to the left when facing the bench; matches standard left-exit dishwasher setups Integrated 180mm splashback — bevelled, fully enclosed stainless splashback included; no additional fitout required Flat-packed for easy transport — ships compact with instruction manual and assembly tools included; four adjustable polished disc feet for levelling Specifications Brand Modular Systems Model / MPN WBBD7-0600L/A Type Stainless Steel Dishwasher Sink & Bench Configuration Left outlet — dishwasher outlet lip on the left when facing the bench Width 600 mm Depth 700 mm Height 900 mm Product Dimensions 600(W) x 700(D) x 900(H) mm Steel Grade SUS304 (18/8) — 1.2 mm gauge Splashback Stainless steel, 180 mm high, 30 mm thick, bevelled, fully enclosed Legs 42 mm diameter, 1.2 mm SS, with adjustable polished disc feet Underframe Tubular stainless undershelf / rack Packed Dimensions 770(W) x 930(D) x 275(H) mm Net Weight 20.25 kg (supplier) — store metafield states 26 kg; verify Assembly Flat-packed; instruction manual and tools included Material Stainless Steel (304) Country of Manufacture China Warranty 24 months — 2 Years Parts Only Venue suitability: Suited to commercial kitchens, catering facilities, aged-care and healthcare canteens, hotels, and any venue running a passthrough dishwasher requiring a clean-side outlet station. Pairs with a matching Dishwasher Inlet Sinks & Outlet Benches inlet bench on the dirty side. Browse the full Modular Systems range for compatible benches, sinks, and shelving. Installation & delivery: Flat-packed for freight efficiency — assemble on-site using the supplied instruction manual and tools. Four fully adjustable polished disc feet allow levelling on uneven floors. Dispatched Australia-wide. Frequently asked questions What does "left outlet" mean?When you stand facing the bench, the outlet lip that guides clean dishware away from the dishwasher is on your left. This suits passthrough dishwashers where the clean-exit side is to the operator's left. Is the splashback included?Yes. The WBBD7-0600L/A ships with an integrated 180 mm high, 30 mm thick bevelled stainless splashback — fully enclosed and ready to install. What steel grade is used?The benchtop is SUS304 (18/8) stainless steel at 1.2 mm gauge, lined with a 15 mm XPS board for rigidity. The legs and frame are also 1.2 mm stainless. Does it arrive assembled?No — it ships flat-packed for ease of transport. An instruction manual and all required assembly tools are included in the box. Are castors available?The standard unit ships with four adjustable polished disc feet. Lockable castor kits are available as an optional accessory — contact us for details.

Read more less

The FED-X XGNS900B is a two-door undercounter storage fridge that delivers professional-grade commercial refrigeration in a compact 900mm-wide footprint. Engineered for restaurants, cafes, clubs, pubs, bars and commercial kitchens that need a reliable cold-storage worktop without sacrificing bench space. Why operators choose the XGNS900B Compact 900mm width — fits under standard bench heights and against the wall, maximising usable floor space in tight kitchens 180L net capacity with GN1/1 compatibility — stores full-size gastronorm pans on the shelf or via optional drawer slides for fast service-line access Static cooling system — no fan noise or fan-driven moisture loss, keeping ingredients fresher for longer Fulterer heavy-duty drawer runners & replaceable magnetic door seals — built for high-frequency opening in busy commercial environments Stainless steel interior and exterior with rounded corners — meets commercial food safety standards and cleans quickly between service periods Specifications Brand FED-X Model / MPN XGNS900B Type Undercounter Storage Fridge Net Capacity 180 L Gross Capacity 240 L Number of Doors 2 (solid stainless steel) GN Compatibility GN 1/1 shelf or GN 1/1 drawer Temperature Range -2 to +8°C Max Ambient Temperature 38°C, 60% RH Cooling System Static cooling Refrigerant R600A Compressor Embraco / Secop Controller Dixell digital Max Shelf Load 40 kg per shelf Internal Dimensions 830 x 595 x 455mm (W x D x H) External Dimensions 903 x 700 x 897mm (W x D x H) Packed Dimensions 930 x 730 x 1050mm (W x D x H) Net Weight 85 kg Construction Stainless steel interior and exterior Power 240V / 50Hz / 170W / 1.2A Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: The XGNS900B is suited to high-turnover venues requiring accessible cold storage directly at the work surface — ideal for restaurant prep lines, cafe service counters, club bars, pub under-bar setups, bakeries and commercial catering operations. Its wall-flush design makes it a practical choice where floor footprint is at a premium. Explore our full range of Under Bench Storage Fridges or browse all FED-X commercial refrigeration to find the right configuration for your kitchen. Installation & delivery: The XGNS900B arrives fully assembled on heavy-duty castors. Position on a level surface with adequate ventilation clearance. Unit can be placed flush against the wall. Dispatched Australia-wide. Frequently asked questions What is the net capacity of the XGNS900B?The XGNS900B has a net usable capacity of 180 litres. The gross volume (total internal volume) is 240 litres. Is the XGNS900B GN pan compatible?Yes. The storage compartment accepts GN 1/1 pans on the standard shelf. Optional additional slides allow GN 1/1 drawers to slide in and out for faster service access. What refrigerant does the XGNS900B use?The XGNS900B uses R600A (isobutane), a low-GWP refrigerant that offers high energy efficiency and is compatible with current Australian regulations. Can the unit be placed against a wall?Yes. The XGNS900B is designed so that it can be placed flush against the wall without requiring rear clearance for the condenser. What is the warranty on the XGNS900B?The XGNS900B carries 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty — a total of up to 4 years coverage — when the product is registered within 14 days of invoice.

Read more less

FED-X S/S Four Door Upright Freezer - XURF1200S2V Net Capacity: 1200L Cooling System: Fan forced cooling Temperature range: -18~-22°C Compressor: Cubigel Controller: Dixell Ambient Temperature: 43°C RH: 40% Refrigerant: R290 Stainless steel interior and exterior with rounded corners for easy cleaning Auto defrost Three levels of shelving plus base Self-closing lockable doors with heavy duty magnetic door seals HFCs and CFCs free foam body insulation Tropicalised for Australian conditions User friendly Digital controls and internal lighting Split door design for rapid recovery and energy saving Integrated door handle for easy cleaning Shelf and shelf support are designed to accommodate 2 x 1/1 GN pan Heavy duty evaporator and condenser fans Heavy duty castors with front wheel brakes Weight loading per shelf: 40kg Dimensions (Internal): 1224mm W x 682mm D x 1394mm H 1/2 split door system can lower yearly running cost by up to 30% 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 730W

Read more less

The FED-X XVRX1800/380S is a 1800mm countertop prep fridge (salad bench) designed for high-volume food preparation in commercial kitchens. It features two hinged stainless steel lids, static cooling with a Donper compressor, and Dixell digital temperature control, holding product at +2 to +8°C for safe holding of prepped ingredients through service. Why operators choose the XVRX1800/380S Eight GN 1/3 pan positions — maximise mise en place coverage during peak service with angled pan positions and 150mm max pan depth across the full 1800mm bench width. Two-door access — split access along the bench means multiple cooks can work the station simultaneously without disrupting adjacent prep areas. Stainless steel throughout — interior and exterior construction for hygiene, durability, and compliance with commercial kitchen standards. Reliable static cooling — Donper compressor with Dixell digital controller ensures consistent +2 to +8°C holding without air blast drying out produce. Heavy-duty condenser fans — maintain performance in demanding ambient environments up to 38°C. Pan divider included — quick organisation of prepped ingredients; pans are sold separately, giving you flexibility on GN sizing. Specifications Brand FED-X Model / MPN XVRX1800/380S Type Countertop Prep Fridge (Salad Bench) Capacity 8 x GN 1/3 Doors 2 Door Type Hinged Temperature Range +2 to +8°C Max Ambient Temperature 38°C at 60% RH Cooling System Static cooling Compressor Donper Controller Dixell digital Max Pan Depth 150 mm Pan Divider Included (pans not included) External Material Stainless Steel (interior & exterior) Power 240V; 50Hz; 10A; 110W Power Type Electric (Single Phase) Width 1800 mm Depth 395 mm Height 281 mm Product Dimensions 1800(W) x 395(D) x 281(H) mm Packed Dimensions 1890(W) x 460(D) x 460(H) mm Net Weight 32 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: Ideal for high-volume cafes, restaurants, delis, sandwich bars, pizza stations, and catering operations requiring fast access to prepped ingredients across a wide service run. The 1800mm width suits double-staffed prep stations and high-output service lines, while the 281mm body height fits under most standard bench heights. Browse our full range of Countertop Prep Fridges or explore all FED-X refrigeration equipment. Installation & delivery: Single-phase 240V — plugs into a standard 10A outlet with no special installation required. Ensure adequate airflow clearance around the condenser. Dispatched Australia-wide with stock held in Sydney, Brisbane, Melbourne, and Perth for faster regional delivery. Frequently asked questions Do pans come included with the XVRX1800/380S?No. The unit includes a pan divider but pans are sold separately. It accommodates GN 1/3 pans up to 150mm deep across 8 positions. What is the power requirement?The XVRX1800/380S runs on single-phase 240V / 50Hz and draws 10A at 110W — compatible with a standard 10A GPO. What warranty is included?FED-X provides 2 years parts and labour plus an additional 2 years parts only, provided the unit is registered within 14 days of invoice date. What is the maximum ambient temperature the unit can operate in?The XVRX1800/380S is rated for ambient temperatures up to 38°C at 60% relative humidity — suitable for most commercial kitchen environments. What is the capacity and how many GN pans does it hold?The bench holds 8 x GN 1/3 pans (up to 150mm deep) in angled positions across the 1800mm width, with a pan divider included for quick organisation of prepped ingredients.

Read more less

• Stainless steel exterior & interior with black frames •Rear mount compressor with environmentally friendly R290 refrigerant •Electronic temperature controller •Two (2) stainless steel shelves standard •Defog feature to ensure the glass stays clear •Maintains temperatures between 2°C – 8°C •Magnetic door gasket(s) standard for positive door seal •Two (2) rear sliding doors •LED interior lighting •Leveling legs

Read more less

Benchstar 20L Hot Water Urn - WB-20/10 Hot Water Urn Description： The water urn features a mirror-finish stainless steel body and delivers reliable hot water with a powerful concealed heating element for easy cleaning. The rotary dial allows intuitive and precise working temperature control from 30 to 100°C, with an automatic limiter for boil protection. Dual indicator lights signal heating and keep-warm modes, while the non-drip tap with water level ensures clean dispensing. A heat-resistant Bakelite-wrapped stainless steel handle enhances safety during use. Ideal for offices, catering events, community centres, and hospitality venues that require consistent hot water service.   Key features 20 Litre Hot Water Urn - WB-20/10 Mirror finish stainless steel body, 265mm Ø (320 including handles) x 510H Strong ability to supply hot water Temperature is precisely and intuitively controlled via a rotary dial with clearly marked levels for different temperature settings. Working Temperature range: +30 to +100℃ The temperature limiter shall cut off automatically after the water has boiled. Turn on the power, and the pilot light is glowing. After the water has boiled, the green will glow, and the temperature of the water should be maintained. The stainless steel handle is wrapped in heat-resistant Bakelite to provide insulation and enhance user safety. Non-drip tap with water level Concealed elements for easy cleaning    1 Year Return to Base Warranty  

Read more less

Benchstar Food Dehydrator with 10 trays – FD-10HB Experience professional-grade food preservation with our high-performance dehydrator, featuring expandable stainless steel trays (10/16/24 configurations) to handle everything from seasonal fruit harvests to artisan jerky production. The precise digital control (30-90°C range + 24-hour timer) and 360° hot air circulation deliver perfect results every time. Key Features  Shelves (mm): 10*339*311 Large capacity and high power –this food dehydrator features stainless steel trays, providing ample space to dry fruits, meats, herbs, and more. It ensures fast and efficient dehydration Adjustable temperature & timer to customise your drying process with a temperature range of +30 to +90˚C and a 24-hour timer Select a number of trays based on your need: 10 trays/16 trays/24 trays Equipped with advanced hot air circulation technology, this dehydrator ensures uniform drying without additives, retaining natural flavors and nutrients. Made from food-grade stainless steel, this dehydrator is durable and BPA-free. It includes an easy-to-use digital control panel and overheating protection for safe operation. Overheat protection at +120°C Recommended Drying Temperatures for Different Foods:          *Herbs/flowers: +35 to 40˚C          *Bread: +40 to +50˚C          *Fruit: +55 to +60˚C          *Meat/fish: +65 to +70˚C Tempered glass door allows crystal-clear monitoring of food dehydration without opening - maintaining perfect temperature and humidity control Trays included      1 Year Parts and Labour Warranty

Read more less

The AG Equipment P40 is a 40-litre commercial planetary mixer built for high-volume production in bakeries, hotels and pizzerias. It pairs a heavy cast base with a stainless steel bowl and three mixing speeds, handling everything from gentle folding to dough kneading. Why operators choose the P40 40-litre stainless steel bowl — generous capacity for large batches and back-to-back production runs. Three speed settings (80/160/310 RPM) — from gentle folding through to firm dough kneading on one machine. Three attachments included — flat beater, spiral dough hook and wire whip cover most mixing jobs out of the box. 2.1 kW electric motor — single-phase 220-240V power, no gas or three-phase supply required. Integrated safety guard & bowl-locking mechanism — full bowl guard and secure locking for safe operation. Specifications Brand AG Equipment Model / MPN P40 Type Planetary Mixer Bowl capacity 40 L Speeds 3 (80 / 160 / 310 RPM) Attachments Flat beater, spiral dough hook, wire whip Input power 2100 W (1500 W output) Power supply 220-240 V, 50 Hz, 8.75 A Energy consumption 50.4 kWh/24hr (continuous) Construction Stainless steel bowl, cast base Product dimensions 630 (W) x 562 (D) x 1011 (H) mm Packed dimensions 645 (W) x 730 (D) x 1175 (H) mm Net weight 210 kg Shipping weight 256 kg Warranty 12 months parts & labour Venue suitability: Suited to industrial bakeries, large hotels, pizzerias and high-volume kitchens that need to mix sizeable batches of cake batter, pastry and dough through a single machine. Browse the full Commercial Planetary Mixers range or see more from AG Equipment to compare capacities and motor sizes. Installation & delivery: Supplied ready to plug into a standard single-phase outlet — no gas or three-phase connection required. As a heavy floor-standing unit, allow for two-person handling on delivery. Dispatched Australia-wide. Frequently asked questions What capacity is the AG Equipment P40? The P40 has a 40-litre stainless steel bowl, suited to large-batch mixing in commercial bakeries and busy kitchens. What attachments come with the P40? It includes three attachments — a flat beater, a spiral dough hook and a wire whip — covering beating, kneading and whisking. How many speeds does the P40 have? Three speed settings, running at 80, 160 and 310 RPM, from gentle folding through to firm dough kneading. What power supply does the P40 need? It runs on single-phase 220-240 V at 50 Hz, drawing up to 8.75 A, with a 2100 W input (1500 W output) motor. What warranty does the P40 come with? The P40 is backed by a 12-month parts and labour warranty through AG Equipment.

Read more less

ExtremePro Speed Oven with Touchscreen - NP-MWO- Key Features Compact design with space-saving footprint, sleek appearance, and user-friendly operation 8.6L gross capacity cooking chamber with up to 10 inches of cooking area Combines microwave and thermal radiation for faster, more even cooking 9 pre-set cooking programs Dual heating elements and microwave technology enable rapid cooking: Upper/lower heating elements ensure even browning, while microwave accelerates core heating, greatly reducing cooking time and enhancing efficiency. Features a 6.8-inch touchscreen with an intuitive interface for precise control Stores 100+ programmable recipes, each customisable with 5-stage cooking programs with independent control of heating elements and microwave power Energy-saving mode maintains low-power standby during idle, reducing consumption and with instant recovery to cooking temperature.e Precise temperature setting ranges from: +170 to +240 C Equipped with a preheat function for added convenience For the Heat Radiation function, there are five cooking setting levels: Low, Medium, High, Strong, and Off. For Microwave cooking, the setting options are On or Off Triple-fan cooling for the magnetron and internal components boosting reliability, extending lifespan, and keeping performance steady during extended use USB port enables recipe upload/download for centralised management Chamber Cooking Area Size: 270x190x168 1 Year Parts & Labour Plus 1 Year Parts Only Warranty When Products Registered Within 14D Of Invoice

Read more less

Bonvue Heated Display Cabinet - H-SF820V Bonvue Heated Display Cabinet combines robust construction with advanced functionality for Australian food businesses. Featuring 4-sided double-layer tempered glass and an AISI304 base display area, it ensures durability and hygiene. The 360° panoramic display with warm yellow LED lighting enhances product visibility, while the digital temperature control maintains optimal heating. Ideal for bakeries and cafes, its sliding rear doors and mobility-ready design offer effortless access and positioning. Energy-efficient with uniform heat distribution, this cabinet meets Australian commercial standards for reliability and performance. Key Features Structural Features: Double-layer tempered glass on all 4 sides 3 adjustable tempered glass shelves + AISI304 stainless steel base display area Warm yellow LED lighting on each level Advanced Functionality: 360° unobstructed panoramic display Digital temperature control system Dual-pane tempered glass sliding rear doors for easy access Premium Engineering: Mobility-ready design with positioning stability AISI304 stainless steel interior & exterior construction Electric heating tube heating system (uniform heat distribution) 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Read more less