
Walk through the back of a busy yum cha restaurant on a Sunday and the steamers are the loudest thing in the room: stacks of bamboo baskets roaring over a pot steamer, trolleys being loaded and sent out every few minutes. Walk through a hospital kitchen or a catering production room and you will find a quieter version of the same job — a cabinet steaming trays of vegetables, rice and fish for hundreds of covers. Both are using a commercial food steamer, but they are very different pieces of equipment.
That is where most buyers get stuck. "Steamer" covers gas pot steamers built for dumplings, multi-tier steamer cabinets, electric countertop units and the steam mode on a combi oven. Each suits a different menu, kitchen and utility setup, and the price range runs from a few hundred dollars for a basket set to many thousands for a gas or electric commercial steamer.
This guide compares the main types available in Australia, what to check on water, drainage, gas and power, how to size capacity, and how to keep a steamer reliable once it is in. We have kept it honest about where each type does and does not fit.
What a Commercial Steamer Does Well
Steam is an efficient way to move heat into food. When steam condenses on a cooler surface it releases a large amount of energy, which is why steaming can cook faster than many people expect, at a gentle temperature that does not dry the surface. That makes a steamer the right tool for delicate products where texture matters:
- Dumplings and dim sum — har gow, siu mai, bao and buns, where a dry surface ruins the result.
- Rice — sticky rice in lotus leaf, rice in trays for banquets and high-volume food service.
- Vegetables — steaming helps preserve colour and texture, and many chefs prefer it to boiling for keeping nutrients in rather than in the water.
- Seafood — whole fish, scallops, mussels and prawns, where a consistent, even heat avoids rubbery results.
- Puddings, custards and reheating — gentle, moist heat that brings food back up without drying it.
Where a steamer does not help is browning. Nothing caramelises in steam, so a commercial steamer complements your oven, grill and wok burners rather than replacing them.
Types of Commercial Food Steamers Compared
Here is how the main categories line up. Use it to narrow the field before comparing individual models and specifications.
| Type | Typical use | Fuel | Strengths | Watch-outs |
|---|---|---|---|---|
| Pot steamer (including waterless designs) | Yum cha, dumplings, Asian restaurants | Gas | Intense steam for stacked baskets, fast turnaround | Needs gas connection, canopy and good drainage |
| Multi-tier steamer cabinet | Banquets, catering, institutions | Gas or electric | High-volume trays, enclosed, consistent | Floor space, water supply, descaling |
| Electric countertop steamer | Restaurants, cafés, smaller venues | Electric | Compact, easy to place, no gas | Power supply must suit the rating |
| Combi oven in steam mode | Mixed menus, venues wanting one machine | Electric or gas | Steam, dry heat and combination in one unit | Higher price; one cavity shared with roasting |
| Basket steamers over a wok or stockpot | Low volume, specials | Existing cooktops | Cheapest entry point | Ties up a burner; inconsistent at volume |
Gas pot steamers for dumplings and yum cha
The pot steamer is the backbone of Cantonese and dim sum kitchens. A powerful gas burner sits under a well, and stacks of bamboo or stainless steel baskets sit on top. Traditional designs boil an open pot of water that must be topped up. Waterless designs are built to generate steam without keeping an open pot of water boiling, and are generally easier to manage through a long service — but how each one handles water feed, drainage and heat-up varies by manufacturer, so read the specification sheet rather than assuming.
Steamer cabinets for high-volume food production
A steamer cabinet looks like an upright oven with shelves for gastronorm trays. It is enclosed, so steam is contained and directed over each tray, and it suits caterers, function centres, aged care and institutional kitchens steaming rice, vegetables and proteins in bulk. Cabinets come in gas and electric versions and may be atmospheric (steam at roughly normal pressure) or pressure steamers, which cook faster but must stay sealed until the cycle finishes.
Electric countertop steamers
For a restaurant or café that needs a reliable steamer without running gas, an electric countertop unit is often the practical answer. It sits on a bench, needs a water supply and suitable power, and handles dumplings, vegetables and seafood in moderate volume.
Combi ovens in steam mode
A combi oven can steam, roast and combine the two, which makes it attractive when space is tight and the menu is varied. We have covered combis in detail in our commercial combi oven buying guide, so we will not repeat it here. The short version: a combi is a flexible kitchen tool, but if steaming is your core job — dim sum at volume, for example — a dedicated steamer keeps your oven free and usually costs less. Browse combi steam ovens if you want both functions in one cabinet.
Bamboo vs Stainless Steel Baskets
For pot steamers, the basket choice matters as much as the steamer itself.
- Bamboo baskets absorb excess condensation, so less water drips back onto the food. That is why dumplings and buns keep a better surface in bamboo, and why many chefs insist on it for yum cha. The downside is life span: bamboo needs proper drying, can harbour mould if stored wet, and needs replacing more often.
- Stainless steel baskets are durable, easy to clean and sanitise, and suit high-volume, hygiene-driven kitchens. They do let condensation drip, so line them with paper or cloth for delicate dumplings and buns.
Many kitchens run both: bamboo for front-of-house trolleys where presentation counts, stainless for back-of-house production and reheating.
Water Supply, Drainage and Descaling
Steamers are water appliances first, which is where many installations go wrong.
Water supply
Many commercial steamers need a permanent cold water connection so they can refill automatically. Check whether the model you are looking at is plumbed-in or manual-fill, and plan the connection point before the unit arrives.
Drainage
Steamers produce condensate and need to be drained, either to a floor waste or via a drain connection. Pot steamers in particular dump hot water regularly, so placing one away from a drain creates a slip and burn hazard. Your plumber needs to know the drainage requirement up front.
Descaling and water treatment
Hard water is the enemy of any steam equipment. Minerals left behind as water boils build up as scale on elements, sensors and inside the boiler, slowing heat-up and eventually causing faults. How often you descale depends on your local water hardness and how hard you run the unit. In hard water areas, ask about a water filter or treatment system — it is cheaper than replacing elements, and some manufacturers expect it for the warranty to apply.
Gas or Electric: NG, LPG and Power Requirements
Fuel choice is usually decided by your kitchen, not by preference.
| Question | Gas steamer | Electric steamer |
|---|---|---|
| What do I need on site? | A gas supply of the right type and capacity, installed by a licensed gasfitter | A circuit matched to the unit's rating, installed by a licensed electrician |
| Natural gas vs LPG | Models are built or converted for one or the other; buy the right version or have it converted by a licensed gasfitter | Not applicable |
| Ventilation | Canopy needed for combustion products and steam | Steam still needs to be managed; check local requirements |
| Best fit | Yum cha, high-intensity pot steaming | Restaurants, cafés, sites without gas capacity |
Most commercial electric steamers draw far more than a standard 10 amp power point can supply, so do not assume you can plug one in. Check the rating plate and specification sheet, and confirm with your electrician whether it needs a dedicated circuit or three-phase supply.
Steam Venting and Canopies
A commercial steamer releases a lot of moisture into the kitchen, and opening a door or lifting a basket stack sends a plume of steam straight up. Without adequate extraction, that steam condenses on ceilings and walls, encourages mould and makes the kitchen uncomfortable to work in.
Gas steamers will almost always sit under a canopy, both for combustion products and steam. Electric steamers may also need extraction depending on size and local requirements. Our exhaust canopy sizing guide explains how canopy overhang and airflow are worked out — steam appliances benefit from generous overhang because the plume spreads as it rises. Always confirm requirements with your mechanical engineer or council before installation.
How to Choose the Right Commercial Steamer for Your Kitchen
Work through these questions in order and the shortlist builds itself.
- What are you steaming? Dim sum and dumplings point to a gas pot steamer. Rice, vegetables and proteins in trays point to a cabinet or electric steamer. A mixed menu with little steaming may be better served by a combi.
- How much, how fast? Estimate your peak output — baskets per sitting or trays per service — and size capacity by tray, tier or basket count, not by the number on a brochure.
- What utilities do you have? Gas type and capacity, electrical supply, water connection and drainage. A unit your site cannot support is not a bargain at any price.
- Where will it go? Check footprint, clearance for door swing or basket stacks, and canopy coverage.
- Who services it? Choose a brand and range with Australian parts and service support. A steamer that is down on a Sunday is a lost yum cha service.
It also helps to know where steamers sit beside related equipment. A steam kettle, for example, is a jacketed pan for stocks, sauces and braises — different job, often confused with a steamer by name. Our guide to steam kettles for volume cooking covers that equipment. If you are fitting out an Asian kitchen, the commercial wok burner guide covers the other half of the line.
Cleaning and Maintaining a Commercial Steamer
Steamers are easy to clean day to day, but they punish neglect.
- Daily: drain the unit at close, wipe the cavity or well, remove and wash baskets and trays, and leave doors or lids open so the interior dries.
- Weekly: check door seals and gaskets, clean drains and strainers, and inspect for scale build-up.
- As needed: descale following the manufacturer's procedure and only with products the manufacturer approves.
- Bamboo baskets: wash, rinse and dry thoroughly before stacking, and replace when they split or stay damp.
Most "my steamer is not working" calls come down to scale, a blocked drain or a failed water supply. Regular descaling and a simple daily routine avoid most of them.
Commercial Steamer Price: What Drives the Cost
Steamer price in Australia depends mostly on type, fuel and capacity. Basket sets used over existing burners are the cheapest entry. Dedicated gas pot steamers and electric steamers, like the two shown above, sit in the low thousands. Large cabinets and combi ovens cost more again.
When comparing prices, include installation — gas, electrical, plumbing and canopy work — plus water treatment and baskets or trays. A cheaper unit that needs a new circuit or gas upgrade may cost more on the day than a pricier one that suits your existing setup. Browse our commercial cooking equipment and Asian restaurant equipment ranges to compare the steamers currently available, and check each product's specification for capacity, water and power before you add it to your cart.
Frequently Asked Questions
What can a commercial steamer cook?
A commercial steamer handles dumplings, dim sum, buns, rice, vegetables, seafood, puddings and custards, and it is excellent for reheating without drying food out. Steam cooks quickly at a gentle temperature and preserves texture and colour. What it cannot do is brown or crisp food, so it works alongside your oven, grill and wok burners rather than replacing them.
Is a gas or electric commercial steamer better?
Neither is better across the board. Gas pot steamers deliver the intense steam a yum cha or dumpling kitchen needs and usually sit under a canopy. Electric steamers suit restaurants, cafés and sites without spare gas capacity, but they need a properly rated electrical supply. Choose based on your menu, your utilities and what your site can support.
How do I choose the right steamer size?
Work from your peak output, not the brochure. Estimate how many baskets or trays you need per sitting or per service, then compare models by basket, tier or tray capacity. Allow headroom for busy days. Also confirm the footprint, clearances, canopy coverage, water connection and drainage, because a steamer that does not fit your site will never reach its rated capacity.
Are commercial steamers easy to clean?
Day to day, yes. Drain the unit at close, wipe the cavity or well, wash the baskets and trays, and leave doors or lids open to dry. The bigger job is descaling, which hard water makes more frequent. Follow the manufacturer's procedure and approved products, and consider water treatment in hard water areas to protect elements and sensors.
What is the difference between a steamer and a combi oven?
A steamer is dedicated to steam cooking, while a combi oven can steam, roast and combine both in one cavity. A combi is flexible when space is tight and the menu is varied. If steaming is your core job, such as dim sum at volume, a dedicated steamer keeps your oven free and usually costs less to buy.