Cooking Equipment

Commercial cooking equipment for Australian hospitality venues — the full hot-side department in one place, covering gas ranges and ovens, fryers, griddles and chargrills, benchtop and induction units, and specialty cookers. The two biggest categories sit one click away: gas oven ranges for the centrepiece of the cooking line, and commercial deep fryers for everything crumbed, battered or chipped. If you're still working out what your kitchen actually needs, the sections below map the whole department so you can shortlist by equipment type first and compare models second.

Who this equipment is for

Every food business that cooks on site buys from this department — what varies is the mix. A café bistro might run a 600mm four-burner cooktop, a griddle and a single-pan fryer. A pub kitchen adds a chargrill and a bank of fryers to keep schnitzels and chips moving on a Friday night. Fish-and-chip shops live and die by fryer recovery times, and Asian restaurants spec dedicated wok burners with heat output no domestic stove can approach. Food trucks and market stalls lean on compact LPG and benchtop gear, while ghost kitchens in all-electric sites are increasingly going induction from day one. The common thread is commercial duty: heavier burners, thicker plate and components rated for service that runs all day, every day.

What's in scope

Ranges and ovens

The backbone of the line. Gas ranges pair open burners with a static or fan-forced oven base, while standalone ovens run from convection and pizza deck models through to combi steam ovens that steam, roast and bake from a single cabinet. High-speed ovens and commercial microwaves round out the category for quick-service reheats and snack menus.

Fryers

From single-pan benchtop units handling a café's side orders to multi-pan gas floor models built for takeaway volume. The range spans tube-style gas burners, electric element models and induction fryers, with oil capacities from a few litres up to serious production units — and recovery speed, not just capacity, is what separates them in service.

Griddles and grills

Flat-plate commercial griddles cover breakfasts, burgers and toasted sandwiches; chargrills add the sear lines and char flavour that sell steaks; and salamanders mount above the pass for melting, gratinating and finishing plates on the way out.

Benchtop and induction

Counter-height versions of nearly every category above — cooktops, fryers, griddles and grills — plus the induction and infrared cooking range, which suits venues without a gas supply, front-of-house cooking stations, and kitchens looking to cut both the heat in the room and the energy bill.

Specialty cooking

The harder-to-find gear lives here too: Asian-style wok ranges with high-output burners, pasta cookers, kebab machines, rotisseries and tandoori ovens. These are the categories where buying genuinely commercial matters most, because there's no domestic substitute that survives a real service.

How to choose commercial cooking equipment in three steps

With sixteen-odd equipment types in one department, the quickest path to a shortlist is to settle three things in order.

Step 1 — Settle the fuel type

Natural gas is the traditional pick where the site has supply — strong, visible heat that most chefs know — but every gas appliance must be installed by a licensed gasfitter. LPG covers food trucks and sites without mains gas. Electric is the simplest install for ovens, griddles and fryers, and induction delivers the fastest response with the least waste heat. Whichever way you go, confirm whether the unit runs from a standard 10-amp outlet or needs a three-phase connection before you buy.

Step 2 — Size to your peak throughput

Spec for your busiest service, not the average Tuesday. Count covers at peak, work out what share of the menu comes off each appliance, and pay attention to recovery — how quickly a fryer climbs back to temperature after a frozen basket drops, or how evenly a griddle holds heat across the full plate. Undersized gear stalls the whole line; oversized gear burns energy and bench space you'll want back.

Step 3 — Fit the footprint and the ventilation

Measure the position before you fall for a model. Floor units need clearances and service access; benchtop units need a bench rated for the weight and the heat. Most commercial cooking appliances also have to sit under a mechanical exhaust canopy, so confirm canopy coverage and your ventilation requirements with your certifier early — it's far cheaper to plan around than to retrofit.

Popular picks: two department staples that show what commercial duty looks like are the Cobra C6D 600mm four burner gas cooktop for the centre of a compact line, and the Pitco SG18S three-basket gas fryer for venues where fried volume drives the menu.

Frequently asked questions

What counts as commercial cooking equipment?

The category covers the powered appliances a food business cooks on: ranges and cooktops, ovens (convection, combi, pizza deck, high-speed and microwave), deep fryers, griddles, chargrills, salamanders and induction units, plus specialty gear like wok ranges, pasta cookers, kebab machines and rotisseries. It differs from domestic equipment in burner output, build weight and duty cycle — commercial units are designed to hold temperature through hours of continuous service.

Should I choose gas, electric or induction?

Gas suits venues with mains supply and menus built around open-flame cooking — wok work especially. Electric is easier to install and does the job for most ovens, fryers and griddles. Induction is the most energy-efficient of the three, heats fastest and keeps the kitchen cooler, though it needs induction-compatible cookware and, on larger units, a three-phase connection. Plenty of kitchens mix all three across the line.

What's the difference between a commercial range and a cooktop?

A range combines burners with an oven in the base, so one footprint does two jobs — the classic centrepiece of a small or mid-size kitchen. A cooktop is burners only, sitting on a stand or bench, which makes sense when you'd rather pick your oven separately — a combi or convection model, say — or when you simply don't need more oven capacity.

Do you sell commercial air fryers?

Domestic-style air fryers aren't built for commercial duty cycles, so you won't find them in a serious kitchen. The same job — fast, fan-forced cooking with little or no oil — is done at venue scale by convection ovens and high-speed ovens, both of which we stock. And where the menu calls for genuinely fried texture at volume, a proper commercial deep fryer remains the right tool.

Do commercial cooking appliances need an exhaust canopy?

In most cases, yes. Australian ventilation requirements (AS 1668.2) mean cooking processes that produce heat, smoke or grease-laden vapour generally need mechanical exhaust, so plan the canopy alongside the equipment rather than after it. Gas appliances also require installation by a licensed gasfitter with a compliance certificate. Your local council or building certifier can confirm exactly what your fit-out needs.

Do you deliver cooking equipment Australia-wide?

Yes. Commercial Kitchen Store delivers nationwide, covering Sydney, Melbourne, Brisbane, Adelaide and Perth metro plus regional freight routes. Floor models ship on a pallet to a ground-floor point, so check doorway and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you spec the right unit for your kitchen and your site.

  • Sale -35%Last stock! CookRite Freestanding 300 mm Radiant Char Grills with Stand LPG AT80G3C-F-LPG CookRite Freestanding 300 mm Radiant Char Grills with Stand LPG AT80G3C-F-LPG

    CookRiteCookRite Freestanding 300 mm Radiant Char Grills with Stand LPG AT80G3C-F-LPG

    Compact commercial 1 burner radiant chargrill. The Ideal char grill for restaurants and commercial kitchens that need extra char grill space. Manually controlled independent burners, this unit gives you dependable BBQ grill space without the bulk. Easy to use and operate piezoelectric start operation with safety flame failure. Heavy-duty frame and corrosion-resistant, seam-free 304 stainless steel finish on the front, sides, and legs, easy to remove drip tray allow for quicker kitchen cleanup. Fully adjustable screw-on legs & undershelf included to ensure a finely tuned, level cooking surface. Quality 304 stainless steel construction. Heavy-duty constructed frame Heavy-duty burners & standby pilots Flame failure Stainless steel burners Stainless steel splash-back Constructed in 304 stainless steel ¾ inch pipe gas inlet 4 adjustable legs & solid undershelf Removal front drip tray Easy manual ignition to all burners Independent burner controls Piezo ignition to all burners Corrosion-resistant, easy to maintain & keep clean Dimensions: 300(W) x 800(D) x 1115(H)mmWarranty: 48 Months Parts & 24 Labour

    $2,271.00 $1,476.15 +GST

  • Sale -15% GasMax GG-12 griddle — front view

    GasMaxGasMax 1-Burner Natural Gas Griddle Top GG-12

    The GasMax GG-12 is a single-burner natural gas griddle top that gives cafés, takeaways and food trucks a compact flat-top cooking surface for breakfasts, burgers and grilled service in a tight benchtop footprint.Why operators choose the GG-12 30 MJ/h heavy-duty burner — a single U-shape steel burner spreads heat evenly across the plate for consistent cooking. 22mm mild-steel plate — thick cooking surface holds temperature and resists warping under continuous service. Flame failure protection — cuts the gas automatically if the flame goes out, for safer day-long operation. Front grease channel & oil collector — scrapes waste into a removable stainless steel tray for fast cleandown. Field-convertible gas — brass control valve and 3/4" rear connection, convertible in the field if your gas supply changes. Specifications Brand GasMax Model / MPN GG-12 Type Benchtop Gas Griddle Fuel Natural Gas Burners 1 Gas output 30 MJ/h Gas connection 3/4" rear Plate 22mm mild steel Construction Stainless Steel Product dimensions 336(W) x 824(D) x 546(H)mm Packed dimensions 440(W) x 890(D) x 520(H)mm Net weight 45 kg Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: Ideal for cafés, sandwich bars, food trucks and small commercial kitchens that need a reliable flat-top in minimal bench space. Browse the full range of commercial griddles or see more GasMax cooking equipment to build out your cookline.Installation & delivery: Requires connection to a natural gas supply by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsDoes the GG-12 run on natural gas or LPG? The GG-12 is the natural gas model. GasMax offers a separate LPG version (GG-12LPG) if your site runs on bottled gas.How powerful is the burner? It uses a single heavy-duty U-shape burner rated at 30 MJ/h, designed to distribute heat evenly across the griddle plate.How thick is the cooking plate? The cooking surface is a 22mm heavy-duty mild-steel plate, which holds heat well and resists warping during long service.Does it have a flame failure safety device? Yes — a flame failure system shuts off the gas automatically if the flame is extinguished.What warranty does it come with? It carries 2 years parts and labour, plus an additional 2 years parts-only cover when the product is registered within 14 days of invoice.

    $1,280.00 $1,088.00 +GST

  • Sale -15% GasMax One Burner Lpg Griddle Top GG-12LPG - Main Image

    GasMaxGasMax 1 Burner LPG Griddle Top GG-12LPG

    The GasMax GG-12LPG is a single-burner LPG benchtop griddle top built to deliver consistent flat-top cooking for breakfast service, burgers, steaks and teppanyaki-style prep where bench space is tight.Why operators choose the GG-12LPG Heavy-duty U-shape burner — rated 33 MJ/h for even heat across the cooking surface. 22mm thick mild-steel plate — holds heat and recovers fast under continuous load. Flame-failure safety system — cuts the gas automatically if the burner goes out. Stainless steel body, splashback & 3-side splash guard — wipes down fast and stands up to daily service. Front grease channel & stainless oil collector — keeps the line clean and simplifies end-of-shift cleanup. Specifications Brand GasMax Model / MPN GG-12LPG Type Benchtop Gas Griddle Gas type LPG Burners 1 (heavy-duty U-shape) Gas output 33 MJ/h Plate 22mm mild steel Construction Stainless steel Gas connection 3/4-inch rear Product dimensions 336(W) x 824(D) x 546(H)mm Packed dimensions 440(W) x 890(D) x 520(H)mm Net weight 45 kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only (with product registration) Venue suitability: Suited to cafes, food trucks, takeaway kitchens, catering operations and small bars running on bottled LPG that need compact flat-top capacity in a tight footprint. It sits within our range of commercial Griddles and the broader GasMAX benchtop cooking line for operators matching units across a cookline.Installation & delivery: Connects to LPG via a 3/4-inch rear gas connection and stands on adjustable heavy-duty legs — have a licensed gas fitter commission it on site. Note the LPG model is not available in New Zealand. Dispatched Australia-wide.Frequently asked questionsHow many burners does the GG-12LPG have? One heavy-duty U-shape burner rated at 33 MJ/h.What gas does it run on? It is an LPG (bottled gas) model with a 3/4-inch rear gas connection and supports easy gas conversion in the field.How thick is the griddle plate? The cooking surface is a 22mm thick mild-steel plate for strong heat retention and fast recovery.Is it safe if the burner goes out? Yes — a flame-failure safety system automatically shuts off the gas if the burner is extinguished.What warranty does it come with? 2 years parts and labour plus an additional 2 years parts only when the product is registered within 14 days of invoice.

    $1,280.00 $1,088.00 +GST

  • Sale -35%Last stock! CookRite 300 mm Hotplate NG - commercial kitchen equipment - AT80G3G-C-NG-SM

    CookRiteCookRite Countertop Gas Griddle 300 mm Hotplate NG AT80G3G-C-NG

    The perfect restaurant flat plate grill that delivers dependable hotplate cooking. Simple to operate piezoelectric start operation, manually-controlled with independent safety flame failure. 16mm thick hotplate matte black trivet, Heavy-duty frame & seam-free 304 stainless steel finish on the front, sides, and legs. A removable drip tray allows for quick kitchen cleanups. Fully adjustable screw-on legs & undershelf included for a finely tuned, level cooking surface. Quality 304 stainless steel construction. Heavy-duty constructed frame 16mm thick hotplate Heavy-duty burners & standby pilots Flame failure Stainless steel burners Stainless steel splash-back Constructed in 304 stainless steel ¾ inch pipe gas inlet 4 adjustable legs Removal front drip tray Independent burner controls Piezo ignition to all burners Corrosion-resistant, easy to maintain & keep clean 2 years parts & labour warranty (+2 years extra when registered with manufacturer) Dimensions: 300(W) x 800(D) x 562(H)mmWarranty: 48 Months Parts & 24 Labour

    $1,891.00 $1,229.15 +GST

  • Sale -35%Last stock! CookRite 300 mm Hotplate LPG - commercial kitchen equipment - AT80G3G-C-LPG-SM

    CookRiteCookRite Countertop Gas Griddle 300 mm Hotplate LPG AT80G3G-C-LPG

    The perfect restaurant flat plate grill that delivers dependable hotplate cooking. Simple to operate piezoelectric start operation, manually-controlled with independent safety flame failure. 16mm thick hotplate matte black trivet, Heavy-duty frame & seam-free 304 stainless steel finish on the front, sides, and legs. A removable drip tray allows for quick kitchen cleanups. Fully adjustable screw-on legs & undershelf included for a finely tuned, level cooking surface. Quality 304 stainless steel construction. Heavy-duty constructed frame 16mm thick hotplate Heavy-duty burners & standby pilots Flame failure Stainless steel burners Stainless steel splash-back Constructed in 304 stainless steel ¾ inch pipe gas inlet 4 adjustable legs Removal front drip tray Independent burner controls Piezo ignition to all burners Corrosion-resistant, easy to maintain & keep clean 2 years parts & labour warranty (+2 years extra when registered with manufacturer) Dimensions: 300(W) x 800(D) x 562(H)mmWarranty: 48 Months Parts & 24 Labour

    $1,891.00 $1,229.15 +GST

  • Sale -35%Last stock! CookRite Countertop Gas Griddle 400mm Hotplate NG AT65G4G-C-NG

    CookRiteCookRite Countertop Gas Griddle 400mm Hotplate NG AT65G4G-C-NG

    Compact commercial hotplate benchtop griddle from CookRite. The perfect restaurant flat plate grill that delivers dependable hotplate cooking. Simple to operate piezoelectric start operation, manually-controlled with independent safety flame failure. 16mm thick hotplate matte black trivet, Heavy-duty frame & seam-free 304 stainless steel finish on the front, sides, and legs. A removable drip tray allows for quick kitchen cleanups. Fully adjustable legs for a finely tuned, level cooking surface. Quality 304 stainless steel construction. Heavy-duty constructed frame Heavy-duty burners & standby pilots Flame failure Stainless steel burners Stainless steel splash-back Constructed in 304 stainless steel Removal front drip tray Independent burner controls Piezo ignition to all burners Corrosion-resistant, easy to maintain & keep clean Dimensions: 400(W) x 650(D) x 485(H)mmWarranty: 48 Months Parts & 24 Labour

    $1,891.00 $1,229.15 +GST

  • Sale -35%Last stock! CookRite Countertop Gas Griddle 400mm Hotplate LPG AT65G4G-C-LPG

    CookRiteCookRite Countertop Gas Griddle 400mm Hotplate LPG AT65G4G-C-LPG

    Compact commercial hotplate benchtop griddle from CookRite. The perfect restaurant flat plate grill that delivers dependable hotplate cooking. Simple to operate piezoelectric start operation, manually-controlled with independent safety flame failure. 16mm thick hotplate matte black trivet, Heavy-duty frame & seam-free 304 stainless steel finish on the front, sides, and legs. A removable drip tray allows for quick kitchen cleanups. Fully adjustable legs for a finely tuned, level cooking surface. Quality 304 stainless steel construction. Heavy-duty constructed frame Heavy-duty burners & standby pilots Flame failure Stainless steel burners Stainless steel splash-back Constructed in 304 stainless steel Removal front drip tray Independent burner controls Piezo ignition to all burners Corrosion-resistant, easy to maintain & keep clean Dimensions: 400(W) x 650(D) x 485(H)mmWarranty: 48 Months Parts & 24 Labour

    $1,891.00 $1,229.15 +GST

  • Sale -15% GasMax GG-24LPG griddle — front view

    GasMaxGasMax 2-Burner LPG Griddle Top GG-24LPG

    The GasMax GG-24LPG is a two-burner LPG benchtop griddle top that gives commercial kitchens a continuous 610mm cooking surface for breakfast service, burgers, teppanyaki and high-volume flat-top cooking.Why operators choose the GG-24LPG Two heavy-duty burners — independent steel u-shape burners at 30 MJ/h each (66 MJ/h total) spread heat evenly across the plate. 22mm heavy-duty mild steel plate — thick cooking surface holds temperature and resists warping under constant load. Flame failure protection — cuts the gas automatically if a burner goes out, a core safety feature for busy lines. Built for cleaning — front grease channel and a stainless steel oil collector make end-of-day clean-down fast. Stainless construction — stainless body, splashback and 3-side splash guard stand up to a commercial environment. Specifications Brand GasMax Model / MPN GG-24LPG Type Benchtop Gas Griddle Power Type LPG Burners 2 (30 MJ/h each) Gas Output 66 MJ/h Cooking Plate 22mm heavy-duty mild steel Construction Stainless Steel Gas Connection 3/4-inch rear Safety Flame failure system Product Dimensions 610(W) x 761(D) x 412(H)mm Packed Dimensions 750(W) x 890(D) x 520(H)mm Net Weight 103 kg Packed Weight 119 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only with product registration Venue suitability: Suited to cafes, food trucks, pubs, takeaways and commercial kitchens running LPG, where a compact benchtop flat-top is needed for breakfasts, burgers and short-order cooking.It sits within our range of commercial Griddles and the wider GasMAX benchtop cooking line for operators building out an LPG cookline.Installation & delivery: Requires LPG connection via the 3/4-inch rear gas inlet by a licensed gas fitter; field gas conversion is supported. Dispatched Australia-wide.Frequently asked questionsIs the GG-24LPG natural gas or LPG? It is an LPG model. A separate natural gas version (GG-24) is available if you run natural gas.What is the total gas output? 66 MJ/h, from two independent burners rated 30 MJ/h each.How thick is the cooking plate? The griddle plate is 22mm heavy-duty mild steel, which holds heat well and resists warping.Does it have a safety cut-off? Yes — a flame failure system shuts off the gas automatically if a burner flame is extinguished.What warranty does it come with? 2 Years Parts & Labour plus an additional 2 Years Parts Only when the product is registered within 14 days of invoice.

    $1,690.00 $1,436.50 +GST

  • Sale -15% GasMax GG-24 griddle — front view

    GasMaxGasMax 2 Burner Natural Gas Griddle Top GG-24

    The GasMax GG-24 is a benchtop natural gas griddle that delivers an even, high-output cooking surface for breakfasts, burgers and fast-paced service line work.Why operators choose the GG-24 Two heavy-duty u-shape burners — 30 MJ/h each (60 MJ/h total) for even heat across the full plate. 22 mm mild-steel cooking plate — holds heat and recovers fast under continuous load. Flame-failure safety system — cuts gas automatically if a burner goes out. Stainless steel construction — splashback plus three-sided splash guard for easy clean-down. Front grease channel and stainless collector — keeps the bench clean and simplifies waste removal. Specifications Brand GasMax Model / MPN GG-24 Type Benchtop Gas Griddle Fuel Natural Gas Burners 2 (u-shape, 30 MJ/h each) Gas output 60 MJ/h Cooking plate 22 mm mild steel Construction Stainless Steel Safety Flame-failure device Gas connection 3/4-inch rear Product dimensions 610(W) x 824(D) x 546(H)mm Packed dimensions 750(W) x 890(D) x 520(H)mm Net weight 80 kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: Suited to cafes, food trucks, pubs, takeaways and commercial kitchens that need a compact, high-output griddle on the cookline. It sits alongside the rest of our Griddles range and the wider GasMAX benchtop line-up for matching cooking stations.Installation & delivery: Connects to natural gas via a 3/4-inch rear inlet and can be field-converted to LPG; installation must be carried out by a licensed gasfitter. Dispatched Australia-wide.Frequently asked questionsDoes the GG-24 run on natural gas or LPG? It ships configured for natural gas and includes an in-field conversion option for LPG. Conversion and installation should be done by a licensed gasfitter.How many burners does it have and what is the gas output? Two heavy-duty u-shape burners rated 30 MJ/h each, for 60 MJ/h total.How thick is the cooking plate? The cooking surface is a 22 mm heavy-duty mild-steel plate for strong heat retention and fast recovery.What safety features are included? Each burner has a flame-failure device that shuts off the gas supply automatically if the flame is extinguished.What warranty does it come with? Two years parts and labour, plus an additional two years parts only when the product is registered within 14 days of invoice.

    $1,690.00 $1,436.50 +GST

  • Sale -15% GasMax GG-36LPG griddle — front view

    GasMaxGasMax 3 Burner LPG Griddle Top GG-36LPG

    The GasMax GG-36LPG is a three-burner LPG benchtop griddle top built to deliver consistent, high-output flat-top cooking for breakfast service, burgers, steaks and Asian teppanyaki-style prep in busy commercial kitchens.Why operators choose the GG-36LPG Three heavy-duty U-shape burners — each rated 30 MJ/h for even heat across the full plate. 22mm thick mild-steel plate — holds heat and recovers fast under continuous load. Flame-failure safety system — cuts gas automatically if a burner goes out. Stainless steel body, splashback & 3-side splash guard — wipes down fast and stands up to daily service. Front grease channel & stainless oil collector — keeps the line clean and simplifies end-of-shift cleanup. Specifications Brand GasMax Model / MPN GG-36LPG Type Benchtop Gas Griddle Gas type LPG Burners 3 (heavy-duty U-shape, 30 MJ/h each) Total gas output 99 MJ/h Plate 22mm mild steel Construction Stainless steel Gas connection 3/4-inch rear Product dimensions 900(W) x 824(D) x 546(H)mm Packed dimensions 1030(W) x 890(D) x 520(H)mm Net weight 110 kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only (with product registration) Venue suitability: Suited to cafes, pubs, food trucks, takeaway kitchens and catering operations running on bottled LPG that need reliable flat-top capacity. It sits within our range of commercial Griddles and the broader GasMAX benchtop cooking line for operators matching units across a cookline.Installation & delivery: Connects to LPG via a 3/4-inch rear gas connection and stands on adjustable heavy-duty legs — have a licensed gas fitter commission it on site. Note the LPG model is not available in New Zealand. Dispatched Australia-wide.Frequently asked questionsHow many burners does the GG-36LPG have? Three heavy-duty U-shape burners, each rated at 30 MJ/h, for 99 MJ/h total output.What gas does it run on? It is an LPG (bottled gas) model with a 3/4-inch rear gas connection and supports easy gas conversion in the field.How thick is the griddle plate? The cooking surface is a 22mm thick mild-steel plate for strong heat retention and fast recovery.Is it safe if a burner goes out? Yes — a flame-failure safety system automatically shuts off the gas if a burner is extinguished.What warranty does it come with? 2 years parts and labour plus an additional 2 years parts only when the product is registered within 14 days of invoice.

    $1,990.00 $1,691.50 +GST

  • Sale -15% GasMax GG-36 griddle — front view

    GasMaxGasMax 900mm 3-Burner Griddle Natural Gas GG-36

    The GasMax GG-36 is a benchtop natural gas griddle that gives commercial kitchens a 900mm continuous cooking surface for breakfast service, burgers, teppanyaki and high-volume griddle work.Why operators choose the GG-36 Three heavy-duty burners — u-shape steel burners deliver even, full-plate heat distribution across the cooking surface. 22mm heavy-duty steel plate — holds and recovers heat under continuous load for consistent searing across the surface. Flame failure protection — gas shuts off automatically if a burner is extinguished, for safer service. Stainless steel construction — stainless body with a raised splashback and three-sided splash guard for easy wipe-down. Front grease channel and oil collector — drains grease away from the cook zone into a stainless collector for quick clean-down. Specifications Brand GasMax Model / MPN GG-36 Type Benchtop Gas Griddle Fuel Natural Gas Burners 3 (u-shape steel) Gas Output 99 MJ/h Griddle Plate 22mm heavy-duty steel Construction Stainless Steel Product Dimensions 900(W) x 824(D) x 546(H)mm Packed Dimensions 1030(W) x 890(D) x 520(H)mm Net Weight 110 kg Gas Connection 3/4-inch rear Safety Flame failure system Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration) Venue suitability: The 900mm plate and 99 MJ/h output suit busy cafes, pubs, food trucks and hotel kitchens running all-day breakfast or burger service. Browse the full Griddles range or see more from GasMAX to match it with the rest of your cookline.Installation & delivery: Connects to a natural gas supply via the 3/4-inch rear connection and must be commissioned by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsDoes the GasMax GG-36 run on natural gas or LPG? The GG-36 is the natural gas model. A separate LPG variant (GG-36LPG) is available if you need bottled gas.How many burners does the GG-36 have? It has three heavy-duty u-shape steel burners for even heat across the full plate, with a total output of 99 MJ/h.How wide is the cooking surface? The griddle has an overall width of 900mm, giving a large continuous steel cooking plate.How thick is the griddle plate? The plate is 22mm heavy-duty steel, which holds heat well and recovers quickly under continuous use.What warranty does the GG-36 come with? It carries 2 years parts and labour plus an additional 2 years parts-only cover when the product is registered.

    $1,990.00 $1,691.50 +GST

  • Sale -10%Last stock! Thor Freestanding Natural Gas Griddle TR-G15F Thor Freestanding Natural Gas Griddle TR-G15F

    ThorThor Freestanding Natural Gas Griddle TR-G15F

    Compact yet powerful, the heavy duty freestanding natural gas Thor griddle provides the ideal robust griddle surface, whilst the slim line design ensures that the griddle can fit into kitchens with limited space. Controlled by a precise durable dial thermostat, all manner of foods can be cooked perfectly and with minimum down time, thanks to the removable waste tray and polished steel cooking surface. Fitted with flame failure protection as standard. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 377(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Warranty 2 Years Weight 58kg Polished steel cooking surface Manually controlled, Independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet 3/4" rear gas connection Optional: Individual pilot, flame failure and piezo ignition Optional: Full size back flue guard AGA approved

    $2,364.90 $2,128.00 +GST

  • Sale -10%Last stock! Thor Freestanding Propane Gas LPG Griddle TR-G15F Thor Freestanding Propane Gas LPG Griddle TR-G15F

    ThorThor Freestanding Propane Gas LPG Griddle TR-G15F

    Compact and exceptionally powerful, the heavy duty freestanding LPG Thor griddle provides the ideal robust griddle surface, whilst the slim line design ensures that the griddle can fit into kitchens with limited space.Controlled by a precise durable dial thermostat, all manner of foods can be cooked perfectly and with minimum down time, thanks to the removable waste tray and polished steel cooking surface. Fitted with flame failure protection as standard. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 377(W) x 510(D)mm Material Stainless Steel Power Type LPG Warranty 2 Years Weight 58kg Polished steel cooking surface Manually controlled, Independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet 3/4" rear gas connection Optional: Individual pilot, flame failure and piezo ignition Optional: Full size back flue guard AGA approved

    $2,364.90 $2,128.00 +GST

  • Sale -15% REB-02E - 1 REB-02E - 2

    GasMaxGasMax REB-02E Natural Gas Salamander 42MJ/h

    The GasMax REB-02E is a heavy-duty natural gas salamander built to sear, finish and gratinate at high heat in busy commercial kitchens. Three ceramic infrared burners deliver 42 MJ/h across a 630 x 400 mm grill area, with auto ignition, a standing pilot and flame-failure protection for safe, fast service. Constructed from heavy-duty stainless steel with an easy-adjust grill shelf, it suits medium to large venues that need consistent overhead browning shift after shift. Why operators choose the REB-02E 3 ceramic infrared burners (42 MJ/h) — intense, even radiant heat for fast searing, finishing and browning. Auto ignition with standing pilot — quick, reliable light-up at the start of every shift. Flame-failure shut-off — gas cuts automatically if a burner goes out, a key safety feature in a busy kitchen. Easy-adjust stainless steel shelf — set the grilling height to the dish, from delicate gratins to thick steaks. Heavy-duty stainless steel construction — withstands high heat and heavy daily use, and wipes down fast. 630 x 400 mm grill area — enough working width to finish multiple plates at once. Rear gas connection — inlet 30 mm from the right side rear keeps the benchtop and front clear. Specifications Brand GasMax Model / MPN REB-02E SKU REB-02E Type Salamander (overhead gas grill / broiler) Gas type Natural Gas Burners 3 x ceramic infrared Gas consumption 42 MJ/h Ignition Auto ignition with standing pilot Safety Flame-failure shut-off Grill area 630 x 400 mm Cavity size 680 x 410 x 395 mm Regulator size 3/4" Gas connection Under appliance, 30 mm from right side rear Dimensions (W x D x H) 914 x 522 x 580 mm Packed dimensions (W x D x H) 1020 x 650 x 760 mm Net weight 75 kg Packed weight 87 kg Construction Heavy-duty stainless steel Shelf Easy-adjust stainless steel grill shelf Warranty 2 years parts and labour + 2 years parts only, with product registration within 14 days of invoice Venue suitability The REB-02E suits medium to large restaurants, steakhouses, pubs and cafés that need reliable overhead heat for searing steaks, finishing seafood and gratinating dishes to order. The adjustable shelf and 42 MJ/h infrared output make it well suited to high-volume grilling and finishing stations. It is less suited to very small sites with limited natural gas supply, as it requires a fixed NG connection rather than electric or LPG plug-in operation. Browse more overhead and benchtop grilling options in our benchtop grills range, or see the full GasMax line-up for matching gas cooking equipment. Installation & delivery The REB-02E runs on natural gas with a 3/4" regulator and a rear gas inlet 30 mm from the right side, and must be connected by a licensed gas fitter with adequate overhead clearance and extraction. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. It is backed by a 2-year parts-and-labour warranty plus a further 2 years parts only when registered within 14 days of invoice. Frequently asked questions What gas type does the GasMax REB-02E use?The REB-02E is a natural gas (NG) salamander rated at 42 MJ/h across three ceramic infrared burners. It connects via a 3/4" regulator to a fixed natural gas supply and is not supplied as an electric or plug-in LPG unit. How many burners does it have and how hot does it get?It has three ceramic infrared burners delivering 42 MJ/h of radiant heat — intense enough to sear steaks, finish seafood and brown gratins quickly across the 630 x 400 mm grill area. What are the dimensions and weight of the REB-02E?The salamander measures 914 x 522 x 580 mm (W x D x H) and weighs 75 kg net. Packed for transport it measures 1020 x 650 x 760 mm and weighs 87 kg. Does it need professional installation and ventilation?Yes. As a fixed natural gas appliance it must be installed by a licensed gas fitter and run under suitable extraction. See our commercial kitchen ventilation guide for canopy and airflow requirements. Is a stand available for the salamander?Yes. A matching stainless steel stand is available so the REB-02E can be set at a comfortable working height when it is not benchtop-mounted. What warranty does the REB-02E come with?It carries a 2-year parts-and-labour warranty plus a further 2 years parts only (4 years total parts cover) when you register the product within 14 days of invoice. For where a salamander fits in a full fit-out, see our essential commercial kitchen equipment list.

    $1,990.00 $1,691.50 +GST

  • Sale -15%Last stock! GasMax REB-02ELPG LPG salamander front view, three control knobs and adjustable rack GasMax REB-02ELPG salamander three-quarter right view

    GasMaxGasMax REB-02ELPG Heavy Duty LPG Salamander 42MJ/h

    The GasMax REB-02ELPG is a heavy-duty LPG salamander that delivers fast, high-intensity overhead grilling for steak, seafood and finishing work. Three ceramic infrared burners draw 42MJ/h across a 630 x 400mm grill area, while auto ignition with a standing pilot and flame failure shut-off keep firing safe and repeatable. The 304-grade stainless steel body and easy-adjust shelf are built to hold up to medium-to-large venue service. Why operators choose the REB-02ELPG 3 ceramic infrared burners — even, radiant heat across the grill bed for fast searing and consistent browning. 42MJ/h gas input — quick recovery between batches so the grill keeps pace through peak service. 630 x 400mm grill area — room to run several portions at once on a steak and seafood line. Auto ignition & standing pilot — one-touch lighting and instant relight between orders. Flame failure shut-off — gas cuts automatically if a burner goes out, protecting staff and kitchen. Easy-adjust stainless steel shelf — set the grilling height to the cut or dish in seconds. Heavy-duty stainless steel construction — wipe-clean surfaces that stand up to high-volume use. Specifications Brand GasMax Model / MPN REB-02ELPG SKU REB-02ELPG Type Salamander grill Gas type LPG Burners 3 x ceramic infrared Gas consumption 42MJ/h Grill area 630 x 400mm Cavity size 680 x 410 x 395mm Regulator size 3/4" External dimensions (W x D x H) 914 x 522 x 580mm Packed dimensions (W x D x H) 1020 x 650 x 760mm Net weight 75kg Packed weight 87kg Material Stainless steel Ignition Auto ignition with standing pilot Safety Flame failure shut-off Warranty 2 years parts & labour + 2 years parts only (with product registration within 14 days of invoice) Venue suitability The REB-02ELPG suits restaurants, steakhouses, seafood kitchens, pubs and busy cafes that need a dedicated overhead grill for searing, toasting and finishing plates to order. Its 42MJ/h infrared output and 630 x 400mm bed handle medium-to-large covers comfortably, and the adjustable shelf lets one unit cover everything from delicate fish to thick steaks. It is less suited to tiny sites with no LPG supply or limited bench clearance. Compare it against the rest of our benchtop grills or browse the full GasMax cooking range to match it with the right stand and supporting equipment. Installation & delivery This is an LPG appliance with a 3/4" regulator and a gas connection 30mm from the right side rear — connection must be carried out by a licensed gas fitter, and the LPG model is not available in New Zealand. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by a 2-year parts-and-labour warranty (plus 2 years parts only with registration). Frequently asked questions What gas does the GasMax REB-02ELPG run on?It runs on LPG only, via a 3/4" regulator with the gas connection 30mm from the right side rear. Note the LPG model and conversion kit are not available in New Zealand. How powerful is this salamander?Three ceramic infrared burners deliver 42MJ/h of radiant heat across a 630 x 400mm grill area, giving fast searing and quick recovery between batches on a busy line. What can I cook on it?It is built for steak and seafood grilling, toasting, browning and finishing plates. The easy-adjust stainless steel shelf lets you set the height for everything from fish fillets to thick cuts. Does it have safety features?Yes. It uses auto ignition with a standing pilot for instant relighting, plus a flame failure device that shuts off the gas automatically if a burner goes out. What ventilation and clearance does it need?As a gas grill it generates heat and fumes, so plan for an extraction hood and adequate bench clearance. Our guide to countertop power, venting and hood options for tight kitchens walks through the basics. How big and heavy is the unit?External dimensions are 914 x 522 x 580mm and it weighs 75kg, so a sturdy bench or matching stand is recommended. Packed for transport it measures 1020 x 650 x 760mm at 87kg. What warranty is included?It comes with 2 years parts and labour, plus an additional 2 years parts only when you register the product within 14 days of invoice.

    $1,990.00 $1,691.50 +GST

  • Sale -15% GasMax KB-3 Kebab Machine — front view GasMax KB-3 Kebab Machine — view 2

    GasMaxGasMax 3 Burner Natural Gas Kebab Machine KB-3

    The GasMax KB-3 is a 3-burner natural gas kebab machine that vertically broils gyros, shawarma, doner and tacos al pastor, keeping meat succulent inside while crisping the exterior.Why operators choose the GasMax KB-3 Three infrared ceramic burners — even, intense heat across the full cooking face for consistent results. 29 kg meat capacity — handles peak service on a compact benchtop footprint. Stainless steel structure with twin heat shields — durable, easy to clean and holds steady cooking temperatures. Adjustable cooking spit — vary the spit-to-burner distance for precise cooking control. Efficient main burner pilot — instant ignition for fast start-up. Heavy-duty rotation motor — built for extended daily use. Specifications Brand GasMax Model / MPN KB-3 Type Kebab Machine Power Type Natural Gas Gas Output 39 MJ/h Burner Count 3 Capacity 29 kg Spit Length 533mm Gas Connection 3/4" NPT rear Power 10A plug Material Stainless Steel Dimensions (W x D x H) 537 x 639 x 843mm Net Weight 34kg Warranty 2 Years Parts & Labour plus 2 Years Parts Only (when registered within 14 days of invoice) Venue suitability: Built for kebab shops, takeaways, food trucks and Mediterranean and Middle Eastern restaurants running high-volume vertical-broiler service. Browse more options in our Kebab Grills & Knives range or the full GasMAX line-up.Installation & delivery: Requires connection to a natural gas supply by a licensed gas fitter and a standard 10A power point for rotation. Dispatched Australia-wide.Frequently asked questionsWhat gas does the GasMax KB-3 use? The KB-3 runs on natural gas (NG). For LPG, GasMax offers the separate KB-3LPG model.How many burners does it have? The KB-3 has 3 infrared ceramic burners, with a gas output of 39 MJ/h.What is the meat capacity? It holds up to 29 kg of meat on the vertical spit.What are the dimensions and weight? The unit measures 537mm wide x 639mm deep x 843mm high and weighs 34kg net.Does it need a power connection? Yes — the rotation motor runs from a standard 10A power point, and the gas burners connect via a 3/4" NPT rear gas connection.

    $1,690.00 $1,436.50 +GST

  • Sale -15% GasMax KB-3LPG Kebab Machine — front view GasMax KB-3LPG Kebab Machine — view 2

    GasMaxGasMax 3 Burner LPG Kebab Machine KB-3LPG

    The GasMax KB-3LPG is a semi-automatic 3-burner LPG kebab machine built for commercial venues preparing gyros, shawarma, tacos al pastor and doner kebabs. It cooks the meat evenly — juicy and tender inside with a crisp exterior — on a rotating vertical spit. Why operators choose the KB-3LPG Infrared ceramic burners — even, intense heat across the meat face for consistent cooking. Three independent burners — control the heat zone and run only what the service needs. Stainless steel structure — durable and easy to wipe down in a busy kitchen. Heat shields both sides — hold cooking temperature steady and protect adjacent surfaces. Adjustable cooking spit — move the meat closer to or further from the burners for precise control. Main burner pilot — instant, reliable ignition for quick start-up. Specifications Brand GasMax Model / MPN KB-3LPG Type Kebab Machine Power Type LPG Burner Count 3 Gas Output 36 MJ/h Meat Capacity 29 kg Spit Length 533 mm Burner Type Infrared ceramic Gas Connection 3/4" NPT rear, with gas regulator Electrical 10A plug Material Stainless Steel Product Dimensions 537(W) x 639(D) x 843(H)mm Packed Dimensions 650(W) x 780(D) x 940(H)mm Net Weight 34 kg Country of Manufacture China Warranty 2 years parts & labour + 2 years parts only (registered within 14 days of invoice) Venue suitability: A strong fit for kebab shops, Mediterranean and Middle Eastern takeaways, food trucks and pub kitchens that run steady gyros and shawarma service and have an LPG supply. The 3-burner format suits mid-volume sites that want more capacity than a 2-burner without the footprint of a 5-burner. Browse the full Kebab Grills & Knives range for spits, knives and accessories, or see the rest of the GasMAX cooking line-up at Commercial Kitchen Store. Installation & delivery: Supplied with a 3/4" NPT rear gas connection and regulator for LPG; final connection should be completed by a licensed gas fitter. Dispatched Australia-wide. Frequently asked questions Does the GasMax KB-3LPG run on LPG or natural gas? The KB-3LPG is an LPG model. A separate natural-gas version (KB-3) is offered for sites plumbed for natural gas. How much meat can the KB-3LPG hold? It carries up to 29 kg on the vertical spit, suiting mid-volume kebab and shawarma service. How many burners does it have and what is the gas output? It has 3 infrared ceramic burners with a total gas consumption of 36 MJ/h. Does it need a power point as well as gas? Yes — the rotating spit motor runs from a standard 10A plug, so a power point is required alongside the LPG supply. What warranty does it come with? 2 years parts & labour plus an additional 2 years parts only when the product is registered within 14 days of invoice.

    $1,690.00 $1,436.50 +GST

  • Sale -15% GasMax KB-4 Kebab Machine — front view GasMax KB-4 Kebab Machine — view 2

    GasMaxGasMax 45kg 4 Burner Natural Gas Kebab Machine KB-4

    The GasMax KB-4 is a semi-automatic 4 burner natural gas kebab machine built to cook gyros, shawarma, tacos al pastor and doner kebabs on a rotating vertical spit, keeping meat succulent inside with a crisp exterior.Why operators choose the KB-4 Infrared ceramic burners — even, intense heat across the meat stack for consistent cooking. 45kg capacity — handles high-volume service through lunch and dinner peaks. Stainless steel construction with twin heat shields — durable, easy to clean, and steady cooking temperatures. Adjustable cooking spit — vary the distance between spit and burners for full control over the cook. Main burner pilot ignition — instant, reliable start-up for fast service. Specifications Brand GasMax Model / MPN KB-4 Type Kebab Machine Power Type Natural Gas Gas Output 52 MJ/h Burners 4 Capacity 45 kg Spit Length (4 burners) 711 mm Material Stainless Steel Power 10A plug Gas Connection 3/4" NPT rear connection with gas regulator Dimensions (W x D x H) 537 x 639 x 1013 mm Packed Dimensions (W x D x H) 650 x 780 x 1200 mm Net Weight 39 kg Warranty 2 years parts & labour, plus 2 years parts only when registered within 14 days of invoice Country of Manufacture China Venue suitability: Suited to kebab shops, Mediterranean and Middle Eastern takeaways, food trucks and busy cafes running continuous vertical-broiler service. Browse the full range in our Kebab Grills & Knives collection, or see more from GasMAX for matching cookline equipment.Installation & delivery: Connects to natural gas via a 3/4" NPT rear connection with supplied regulator; have a licensed gasfitter commission the unit. Dispatched Australia-wide.Frequently asked questionsDoes the GasMax KB-4 run on natural gas or LPG? The KB-4 is the natural gas (NG) model. A separate LPG version (KB-4LPG) is available if you run on bottled gas.How many burners does the KB-4 have? It has 4 infrared ceramic burners stacked vertically, with a gas output of 52 MJ/h.What is the cooking capacity? The KB-4 holds up to 45 kg of meat on the vertical spit, suiting high-volume kebab service.What size meat spit does it use? On the 4 burner KB-4 the spit length is 711 mm.What warranty does the KB-4 come with? It carries 2 years parts & labour, plus a further 2 years parts only when the product is registered within 14 days of invoice.

    $1,990.00 $1,691.50 +GST

  • Sale -15% GasMax KB-4LPG Kebab Machine — front view GasMax KB-4LPG Kebab Machine — view 2

    GasMaxGasMax 45kg 4 Burner LPG Kebab Machine KB-4LPG

    The GasMax KB-4LPG is a semi-automatic 4 burner LPG kebab machine that vertically broils gyros, shawarma, doner and tacos al pastor, keeping meat succulent inside with a crisp exterior.Why operators choose the KB-4LPG Infrared ceramic burners — even, intense heat across the spit for consistent browning. 45kg spit capacity — carries a full day of trade through busy lunch and dinner service. 48 MJ/h LPG output — fast heat-up and steady cooking temperatures on bottled gas. Heat shields both sides — stainless shields hold temperature and protect surrounding benchtops. Adjustable cooking spit — vary the distance between spit and burners for precise cooking control. Stainless steel build with oil collector — durable, hygienic and simple to clean down. Specifications Brand GasMax Model / MPN KB-4LPG Type Kebab Machine Power Type LPG Gas Output 48 MJ/h Burners 4 infrared ceramic burners Spit Capacity 45 kg Spit Length 711 mm (4 burners) Material Stainless Steel Gas Connection 3/4" NPT rear, with built-in gas regulator Power 10A plug Product Dimensions 537(W) x 639(D) x 1013(H) mm Packed Dimensions 650(W) x 780(D) x 1200(H) mm Net Weight 39 kg Warranty 2 Years Parts & Labour plus 2 Years Parts Only (registered within 14 days of invoice) Country of Manufacture China Venue suitability: Built for kebab shops, Mediterranean and Middle Eastern takeaways, food trucks and any venue running bottled LPG that needs reliable, high-volume vertical broiling. Browse the full Kebab Grills & Knives range or see more from GasMAX to match accessories and burners to your setup.Installation & delivery: Connects to LPG via a 3/4" NPT rear gas connection with a built-in regulator; have a licensed gasfitter commission the unit. Dispatched Australia-wide.Frequently asked questionsDoes the KB-4LPG run on LPG or natural gas? The KB-4LPG is configured for LPG (bottled gas). A natural-gas KB-4 variant is available separately.How much meat does it hold? The spit carries up to 45kg, suited to steady high-volume kebab and gyros service.How many burners does it have? Four infrared ceramic burners, each with its own knob, distribute even, intense heat up the spit.What is the gas output? The machine has a 48 MJ/h LPG gas output for fast heat-up and stable cooking temperatures.What are the machine's dimensions? It measures 537(W) x 639(D) x 1013(H) mm and weighs 39kg net.

    $1,990.00 $1,691.50 +GST

  • Sale -15% GasMax KB-5 Kebab Machine — front view GasMax KB-5 Kebab Machine — view 2

    GasMaxGasMax 5 Burner Natural Gas Kebab Machine KB-5

    The GasMax KB-5 is a 5-burner natural-gas kebab machine that vertically broils doner, gyros, shawarma and tacos al pastor, keeping meat succulent inside with a crisp exterior. Why operators choose the KB-5 Five infrared ceramic burners — even, intense heat across the full meat stack for consistent cooking. 56 kg meat capacity — handles high-volume doner and gyros service through peak trade. Stainless steel structure with twin heat shields — durable, hygienic and holds cooking temperature. Adjustable cooking spit — vary the distance between spit and burners for precise cooking control. Efficient main-burner pilot — instant ignition for quick start-up. Specifications Brand GasMax Model / MPN KB-5 Type Kebab Machine Power Type Natural Gas Gas Output 65 MJ/h Burner Count 5 Meat Capacity 56 kg Spit Length 965 mm Gas Connection 3/4" NPT rear, with gas regulator Power 10A plug Material Stainless Steel Product Dimensions 537(W) x 639(D) x 1170(H)mm Net Weight 44 kg Warranty 2 Years Parts & Labour Plus 2 Years Parts Only (when registered within 14 days of invoice) Venue suitability: Built for kebab shops, doner and gyros outlets, food trucks and high-turnover takeaways needing reliable vertical-broiler output on natural gas. Browse more Kebab Grills & Knives or see the full GasMAX range to match accessories and capacity to your venue. Installation & delivery: Requires a natural-gas connection (3/4" NPT rear) and a 10A power point; install by a licensed gas fitter. Dispatched Australia-wide. Frequently asked questions What fuel does the GasMax KB-5 use? The KB-5 runs on natural gas (NG) with a 65 MJ/h output and a 3/4" NPT rear gas connection; an LPG version (KB-5LPG) is sold separately. How much meat can the KB-5 hold? It has a 56 kg meat capacity, suiting high-volume doner and gyros service. How many burners does it have? Five infrared ceramic burners deliver even, intense heat across the meat stack. What are the dimensions and weight? The unit measures 537(W) x 639(D) x 1170(H)mm and weighs 44 kg net. What warranty is included? Two years parts and labour plus two further years parts-only when the product is registered within 14 days of invoice.

    $2,190.00 $1,861.50 +GST

  • Sale -13% Thor Gas Salamander Grill LPG Thor Gas Salamander Grill LPG

    ThorThor Gas Salamander Grill LPG

    An exceptionally heavy duty gas salamander grill, the Thor commercial LPG salamander provides all the power and reliability required in the business commercial establishment. Incredibly robust, the salamander is made from durable stainless steel and features high quality construction throughout. The dual infrared burners are powerful and are controlled by a precise dial control, meaning that professional grilling is made easy. Product features Dimensions 460(H) x 910(W) x 500(D)mm Dimensions - cooking area 627(W) x 287(D)mm Material Stainless Steel Warranty 2 Years Weight 38.6kg Stainless steel main body with smoothed out welds Two16MJ/hr infrared burners Manual control valves with standing pilot as standard Stainless steel spill trays Cool dial Easy clean, easy service AGA approved

    $2,587.40 $2,250.00 +GST

  • Sale -13% Thor Gas Salamander Grill Natural Gas Thor Gas Salamander Grill Natural Gas

    ThorThor Gas Salamander Grill Natural Gas

    An incredibly heavy duty gas salamander grill, the Thor commercial natural gas grill provides all the power and reliability required in busy restaurants and takeaways.Exceptionally robust, the salamander is made from durable stainless steel and features high quality construction throughout. The dual infrared burners are powerful and are controlled by a precise dial control, meaning that professional grilling is made easy. Product features Dimensions 460(H) x 910(W) x 500(D)mm Dimensions - cooking area 627(W) x 287(D)mm Material Stainless Steel Warranty 2 Years Weight 38.6kg Stainless steel main body with smoothed out welds Two 16MJ/Hr infrared burners Manual control valves with standing pilot as standard Stainless steel spill trays Cool dial Easy clean, easy service AGA approved

    $2,587.40 $2,250.00 +GST

  • Sale -15% TECNODOM by FHE 4X435X350 Tray Convection Oven TDE-4C - TDE-4C TECNODOM by FHE TDE-4C 4-Tray Convection Oven 240V

    TECNODOMTECNODOM by FHE TDE-4C 4-Tray Convection Oven 240V

    The TECNODOM by FHE TDE-4C is a 4-tray bench-top convection oven built for bakeries, cafés and small commercial kitchens that need consistent fan-forced baking from a compact footprint. It holds 4 x 435 x 350 mm trays spaced 84 mm apart, runs on a standard 240 V / 10 A plug at 2.35 kW, and cooks across a 50 °C–280 °C range. A stainless steel cooking chamber with rounded corners and an overture folding door make it easy to load and clean shift after shift. Why operators choose the TDE-4C 4 x 435 x 350 mm tray capacity — bake multiple batches of pastries, par-baked bread or trays of food at once. 2.35 kW on a 240 V / 10 A plug — runs from a standard single-phase power point, no special wiring required. 50 °C–280 °C temperature range — covers gentle proving through to high-heat baking and roasting. Overture folding door — high-performance door that swings clear for easy loading in tight benchtop spaces. Stainless steel chamber with rounded corners — faster wipe-downs and no hard-to-reach build-up. 84 mm tray spacing — enough clearance for risen and topped products between shelves. Tempered low-e glass & LED alarms — clear visibility of the bake plus at-a-glance status indication. IPX3-rated, high-resistance hinge & interlocking gasket — durable, water-resistant build for daily commercial use. Specifications Brand TECNODOM by FHE Model / MPN TDE-4C SKU TDE-4C Type Bench-top convection oven (electric, fan-forced) Tray capacity 4 x 435 x 350 mm trays (included) Tray spacing 84 mm between trays Temperature range 50 °C – 280 °C Timer 60-minute or infinite Power 240 V, 2.35 kW, 10 A Door Overture folding door with tempered low-e glass Chamber Stainless steel with rounded corners Protection rating IPX3 Internal dimensions (W x D x H) 464 x 420 x 370 mm External dimensions (W x D x H) 589 x 660 x 580 mm Packed dimensions (W x D x H) 720 x 625 x 725 mm Net weight 39 kg Packed weight 45 kg Warranty 1 year parts and labour Venue suitability The TDE-4C suits cafés, bakeries, sandwich bars, delis and small kitchens that need reliable fan-forced baking without a three-phase install. Its compact 589 x 660 mm footprint and standard 10 A plug make it ideal for benchtop use where space and power are limited. Higher-volume production kitchens that bake continuously through service may be better served by a larger 6- or 10-tray oven, but for batch baking and finishing the 4-tray capacity is well matched. Browse more options in our convection ovens range, or see the wider commercial ovens line-up for larger-capacity alternatives. Installation & delivery The TDE-4C plugs into a standard 240 V / 10 A single-phase power point and needs no special wiring, with clearance around the unit for ventilation. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. It is backed by a 1-year parts-and-labour warranty. Frequently asked questions How many trays does the TECNODOM TDE-4C hold?The TDE-4C holds 4 trays sized 435 x 350 mm, which are included with the oven. Trays are spaced 84 mm apart, leaving room for risen and topped products between shelves. What power supply does the TDE-4C need?It runs on 240 V single-phase at 2.35 kW and draws 10 A, so it plugs into a standard power point with no special wiring or three-phase supply required. What temperature range does the convection oven reach?The TDE-4C operates from 50 °C to 280 °C, covering gentle proving and holding through to high-heat baking and roasting, with a 60-minute or infinite timer. What are the dimensions of the TDE-4C?It measures 589 x 660 x 580 mm (W x D x H) externally with a 464 x 420 x 370 mm internal chamber, and weighs 39 kg. Packed for transport it measures 720 x 625 x 725 mm and weighs 45 kg. How do I keep a convection oven performing well?Regular cleaning of the chamber, glass and fan plus periodic servicing keeps a convection oven baking evenly and extends its life. See our guide on the importance of regular commercial oven maintenance for a routine. What warranty does the TDE-4C come with?It carries a 1-year parts-and-labour warranty. For where a convection oven fits in a full kitchen fit-out, see our essential commercial kitchen equipment list.

    $2,199.00 $1,869.15 +GST

  • Sale -15% GasMax KB-3-MS kebab machine — front view GasMax KB-3-MS kebab machine — view 2

    GasMaxGasMax Meat Rod Assembly for KB-3 Kebab Machine KB-3-MS

    The GasMax KB-3-MS is a stainless steel meat rod assembly that serves as the central spit on which the meat stack is loaded and rotated in a GasMax KB-3 or KB-3LPG kebab machine. Supplied as a complete assembly with the collar mount, base plate, and securing R-clip, it is a genuine replacement part that restores a worn or damaged machine to full service.Why operators choose this assembly Genuine GasMax part — built to the original KB-3 specification, so it seats and rotates correctly without modification. Stainless steel construction — food-safe, corrosion-resistant, and easy to wipe down between services. Complete assembly — rod, base plate, and R-clip arrive together, so the machine is back in service without sourcing separate fittings. Cross-model fit — designed for both the natural-gas KB-3 and the LPG KB-3LPG, simplifying spares stocking for venues running either model. Specifications Brand GasMax Model / MPN KB-3-MS Type Meat rod assembly (kebab machine spare part) Compatibility GasMax KB-3 and KB-3LPG kebab machines Material Stainless Steel Country of Manufacture China Venue suitability: This replacement spit suits any kebab shop, takeaway, food truck, or catering kitchen running a GasMax three-burner kebab machine and needing to keep it in continuous service. Browse the full range of Kebab Grills & Knives for matching consumables, or see the complete GasMAX line-up for the parent machines.Installation & delivery: The assembly fits the existing KB-3 / KB-3LPG drive without modification — lift out the worn rod, seat the replacement, and secure with the supplied R-clip. Dispatched Australia-wide.Frequently asked questionsWhich machines does the KB-3-MS fit? It is designed for the GasMax KB-3 (natural gas) and KB-3LPG (LPG) semi-automatic three-burner kebab machines.What is included in the assembly? The complete meat rod, the round base plate, and the securing R-clip.What material is it made from? Stainless steel, which is food-safe and corrosion-resistant for daily commercial use.Is this a genuine GasMax part? Yes, it is a genuine GasMax replacement built to the original KB-3 specification.Will it fit a four or five-burner GasMax kebab machine? No — the KB-3-MS is specific to the KB-3 series; the KB-4 and KB-5 machines use their own meat rod assemblies.

    $100.00 $85.00 +GST

© 2026 Commercial Kitchen Store, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account