Commercial refrigeration for Australian hospitality venues — every cold-side category in one department, spanning storage fridges, freezers, display and drinks cabinets, underbench and prep units, ice machines and blast chillers. If general-purpose cold storage is what you're after, go straight to our commercial fridges range — it's the largest category in the department. Otherwise, this page maps the whole range so you land on the right cabinet first time.
Who this refrigeration range is for
Almost every venue we supply buys from this department more than once. Cafés and restaurants run solid-door uprights in the back of house and glass-door merchandisers out front; pubs, clubs and bottle shops stack beverage cabinets behind the bar; bakeries and patisseries pair cake displays with underbench prep cabinets; caterers and ghost kitchens lean on freezers and rapid chilling to stretch prep across the week. Convenience stores and canteens are increasingly going self-service, with open-deck and glass-door grab-and-go cabinets doing the selling. Whatever the venue, the gear here is built for commercial duty cycles — heavy door traffic, hot kitchens, long trading hours — which is exactly where domestic units fall over.
What's in scope
Storage fridges
The back-of-house workhorses: solid-door upright cabinets in one-, two- and three-door formats, plus chef bases and drawer units that slot under cooking lines. Stainless construction and digital temperature controllers are standard across the serious end of the range.
Display and merchandising fridges
Cabinets that sell while they chill — glass-door upright drink and display fridges, cake and deli showcases, countertop displays and open-deck units for self-service aisles. Lighting, glass area and shelf merchandising matter as much as capacity here.
Underbench and prep refrigeration
Counter-height cold storage that doubles as bench space — under bench fridges in solid- and glass-door formats, plus pizza, salad and sandwich prep cabinets with refrigerated ingredient wells built into the worktop.
Freezers
Upright storage freezers, chest freezers, glass-door display freezers and ice cream cabinets all live in our commercial freezers range — from compact underbench units to multi-door uprights sized for high-volume frozen lines.
Bar, beverage and specialty
Behind-the-counter gear and the harder-to-find categories: bar fridges and backbar cabinets, wine fridges, ice makers from benchtop through modular, and blast chillers for venues cooling cooked food to HACCP timeframes.
How to choose commercial refrigeration in three steps
With this many categories, the fastest route to the right unit is to answer three questions in order.
Step 1 — Chiller, freezer or display?
Decide the job first. Holding stock cold out of sight is a storage chiller. Holding it frozen is a freezer. Selling chilled product to customers who choose by eye is a display unit — and that choice changes everything downstream, because display cabinets trade storage efficiency for glass and lighting.
Step 2 — Size to your peak stock
Capacity is quoted in litres. Work out how much product you need to hold between deliveries at your busiest week — not your average — and add headroom for airflow, since a cabinet packed solid can't circulate cold air. Two mid-size cabinets often beat one giant unit, splitting raw and ready-to-eat stock for food-safety separation.
Step 3 — Pick the format for the position
Match the cabinet to where it lives: upright for floor space, underbench where the unit doubles as a workbench, countertop where there's no floor left. Then check the practical fit — door swing and aisle clearance, ventilation gaps, the climate rating for hot kitchens, and whether the compressor runs off a standard 10-amp outlet (most cabinets in this range do).
The category covers all the powered cold-storage and cold-display equipment a food business runs: storage fridges and freezers, glass-door display and drinks cabinets, underbench and prep units, bar and backbar cabinets, ice machines and blast chillers. It's distinct from domestic refrigeration in build quality, compressor duty cycle and compliance with commercial food-safety requirements.
What's the difference between a storage fridge and a display fridge?
A storage fridge is built to hold stock efficiently — solid doors, deep shelves, better insulation and lower running costs. A display fridge is built to sell — glass doors or open decks, internal lighting and merchandising shelves, at the cost of higher energy use. Venues usually need both: storage cabinets in the kitchen, display cabinets where customers choose.
What temperature should commercial fridges and freezers hold?
Under Australian food-safety standards, potentially hazardous chilled food must be kept at 5°C or below, so chillers are typically set around 1–4°C to keep all zones of the cabinet compliant. Freezers should keep food hard frozen, with -18°C the common operating point. Commercial cabinets use digital controllers so you can verify and log temperatures for your food-safety program.
Can I use a domestic fridge in a commercial kitchen?
It's a false economy. Domestic units aren't designed for constant door openings, 24/7 operation or hot commercial kitchens, so they struggle to hold safe temperatures under load — a problem when your food-safety program depends on staying at 5°C or below. Commercial cabinets carry heavier compressors, faster temperature recovery and warranties that actually apply to business use.
What is a self-service fridge?
A self-service fridge is a display cabinet customers serve themselves from — either an open-deck unit with no doors, or a glass-door merchandiser. They're the standard fit for grab-and-go drinks, sandwiches and salads in convenience stores, canteens and café front counters. Open decks maximise impulse sales; glass-door units hold temperature more efficiently and cost less to run.
Do you deliver refrigeration equipment Australia-wide?
Yes. Commercial Kitchen Store delivers nationwide, including Melbourne, Sydney, Brisbane, Adelaide and Perth metro plus regional freight routes. Larger cabinets ship on a pallet to a ground-floor point, so check door and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you size and spec the right unit.
The Atosa Two Doors Table Saladette is a compact and heavy duty unit ideal for catering and busy kitchens. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel top and marble prep area. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility. Please note: the unit features a manual defrosting system. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 300L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Heavy duty stainless steel top
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system take note
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
GN I pans & Lids not included
Net Weight 72Kg
Dimensions: 900mmW x 700D x 880H
Power Requirements: 220V 50Hz; 250W; 2A
Dimensions: 900(W) x 700(D) x 943(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 900mm
Finish: Stainless Steel
Depth: 700mm
The Atosa Two Doors Sliding Lid Saladette is a compact and well-rounded unit ideal for catering and busy kitchens. Engineered for optimal performance in hot environments, this saladette fits standard GN pans and lids (not included) and has a stainless steel top with marble prep area, ideal for pizza. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and includes white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility. Please note: this unit requires manual defrosting. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 300L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Heavy duty stainless steel top
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system take note
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
GN I pans & Lids not included
Net Weight 72Kg
Dimensions: 900mmW x 700D x 888H
Power Requirements: 220V 50Hz; 250W; 2A
Dimensions: 900(W) x 700(D) x 950(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 900mm
Finish: Stainless Steel
Depth: 700mm
A reliable and robust work surface combined with cold storage, the Atosa Glass Four Door Cooling Table is tailored to withstand the working conditions of even the hottest kitchens. Its cold storage compartment features a stainless steel interior and exterior and is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight 162Kg
Dimensions: 2284mmW x 765D x 872H
Power Requirements: 220V 50Hz; 350W
Dimensions: 2230(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 560L
Width: 2230mm
Finish: Stainless Steel
Depth: 700mm
A reliable and robust work surface combined with cold storage, the Atosa Glass Three Door Cooling Table is tailored to withstand the working conditions of even the hottest kitchens. Its cold storage compartment features a stainless steel interior and exterior and is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 450L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight 125Kg
Dimensions: 1795mmW x 600D x 838H
Power Requirements: 220V 50Hz; 350W; 2.8A
Dimensions: 1795(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 450L
Width: 1795mm
Finish: Stainless Steel
Depth: 700mm
A reliable and robust work surface combined with cold storage, the Atosa Glass Two Door Cooling Table is tailored to withstand the working conditions of even the hottest kitchens. Its cold storage compartment features a stainless steel interior and exterior and is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 300L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight 100Kg
Dimensions: 1360mmW x 600D x 838H
Power Requirements: 220V 50Hz; 250W; 2.0A
Dimensions: 1360(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
The Atosa 2 Door Refrigerated Pizza Table is a pizza prep station that is equipped with cold storage and a generous work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 300L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX1500 (optional)
Net Weight 209Kg
Dimensions: 1510mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 270W; 2.2A
Dimensions: 1510(W) x 800(D) x 1000(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 1510mm
Finish: Stainless Steel
Depth: 800mm
The Atosa Single Door Refrigerated Pizza Table with Drawers is a compact pizza prep station that is equipped with cold storage and a sizeable work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 180L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX1500 (optional)
Net Weight 246Kg
Dimensions: 1510mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 260W; 2.2A
Dimensions: 1510(W) x 800(D) x 1000(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 180L
Width: 1510mm
Finish: Stainless Steel
Depth: 800mm
The Atosa 3 Door Refrigerated Pizza Table is a pizza prep station that is equipped with cold storage and a generous work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX2000 (optional)
Net Weight 267Kg
Dimensions: 2010mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 330W
Dimensions: 2010(W) x 800(D) x 1000.5(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 560L
Width: 2010mm
Finish: Stainless Steel
Depth: 800mm
The Atosa EPF3480 is a refrigerated pizza prep table that gives a busy pizzeria 485 litres of chilled storage, two doors plus a six-drawer bank and a granite work surface, with a refrigerated topping rail across the top for ready-to-grab ingredients.
Why operators choose the EPF3480
485 L of cold storage with two doors and drawers — base ingredients, dough and prepped toppings all stay chilled and within reach under one bench.
Refrigerated topping rail — accepts 600 x 400mm racks and trays (not included) so the line keeps moving through service.
Granite work surface — a hard-wearing top built for rolling and stretching dough.
Built for hot kitchens — rated to a 43°C ambient working temperature and holding a -2°C to +8°C interior, with R134A refrigerant and insulation foam.
European refrigeration parts on castors — Aspera compressor, EBM fan motor and a Carel or Dixell digital controller, mounted on castors for easy cleaning and repositioning.
Specifications
Brand
Atosa
Model / MPN
EPF3480
Type
Refrigerated pizza prep table
Capacity
485 L
Doors
2
Refrigerant
R134A
Temperature range
-2°C to +8°C
Ambient working temperature
43°C
Tray / rack compatibility
600 x 400mm (not included)
Work surface
Granite
Construction
Stainless steel interior and exterior
Power
220V; 260W; 2.2A
Product dimensions
2010(W) x 800(D) x 1000.5(H)mm
Packed dimensions
2064(W) x 854(D) x 1051(H)mm
Net weight
360 kg
Mobility
Castors fitted as standard
Warranty
48 months parts, 24 months labour
Venue suitability: Built for pizzerias, restaurants, cafes, pubs and clubs, quick-service kitchens and bakeries that need high-volume chilled prep in one mobile bench. For other refrigerated prep options, browse our Salad Bar Fridges range.
Installation & delivery: Arrives complete on castors, plugs into a standard outlet and is ready to position on site. Dispatched Australia-wide.
Frequently asked questions
How much refrigerated storage does the EPF3480 hold? It holds 485 litres across two doors plus a six-drawer bank under the granite work surface.
What size trays does the topping rail take? The refrigerated rail accepts 600 x 400mm racks and trays, which are not included.
What refrigerant does it use and how cold does it run? It uses R134A refrigerant and holds an interior temperature of -2°C to +8°C, rated to work in ambient temperatures up to 43°C.
Is it mobile? Yes — castors are fitted as standard, so it can be repositioned and rolled out for cleaning.
What warranty is included? The EPF3480 is covered by 48 months parts and 24 months labour warranty.
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Four Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 145Kg
Dimensions: 2230mmW x 700D x 838H
Power Requirements: 220V 50Hz; 350W; 2.8A
Dimensions: 2230(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 560L
Width: 2230mm
Finish: Stainless Steel
Depth: 700mm
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Three Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 450L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 120Kg
Dimensions: 1795mmW x 700D x 838H
Power Requirements: 220V 50Hz; 350W; 2.8A
Dimensions: 1795(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 450L
Width: 1795mm
Finish: Stainless Steel
Depth: 700mm
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Two Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 280L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 119Kg
Dimensions: 1360mmW x 700D x 838H
Power Requirements: 220V 50Hz; 300W; 2.5A
Dimensions: 1360(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
A robust and hard-wearing cooling unit, the Atosa 1.8m Freezer Undercounter is engineered to keep products stored at optimal temperatures in even the hottest commercial kitchens. The unit is built with a heavy-duty stainless steel interior and exterior and fitted with insulating foam, as well as fan-forced cooling by its high quality European parts including an Aspera compressor and EDM fan motor. It is equipped with a Carel or Dixell digital temperature controller and arrives with castors installed for easy mobility.
Product Features:
3 Doors
Capacity: 390L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight(Kg) 81
Dimensions: 1800mmW x 600D x 838H
Dimensions: 1800(W) x 600(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
A robust and hard-wearing cooling unit, the Atosa 1.5m Freezer Undercounter is engineered to keep products stored at optimal temperatures in even the hottest commercial kitchens. The unit is built with a heavy-duty stainless steel interior and exterior and fitted with insulating foam, as well as fan-forced cooling by its high quality European parts including an Aspera compressor and EDM fan motor. It is equipped with a Carel or Dixell digital temperature controller and arrives with castors installed for easy mobility.
Product Features:
2 Doors
Capacity: 300L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight(Kg) 74
Dimensions: 1500mmW x 600D x 838H
Dimensions: 1500(W) x 600(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
A robust and hard-wearing cooling unit, the Atosa 1.2m Freezer Undercounter is engineered to keep products stored at optimal temperatures in even the hottest commercial kitchens. The unit is built with a heavy-duty stainless steel interior and exterior and fitted with insulating foam, as well as fan-forced cooling by its high quality European parts including an Aspera compressor and EDM fan motor. It is equipped with a Carel or Dixell digital temperature controller and arrives with castors installed for easy mobility.
Product Features:
2 Doors
Capacity: 220L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Net Weight(Kg) 71
Dimensions: 1200mmW x 600D x 838H
Dimensions: 1200(W) x 600(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Sturdy and efficient, the Atosa Top Mounted Double Glass Door Freezer with light box is a refrigeration and display solution that is built to last. Featuring a robust exterior and interior stainless steel construction, this fridge is fitted with heavy duty Embraco compressor units, is equipped with a Dixell digital temperature control system, and arrives with pre-installed shelves and castors for ease of use and mobility. Its refrigerated cabinet sports a glass door for visibility, ideal for visual merchandising while you have peace of mind that the fan-forced cooling system keeps your products chilled no matter how hot it gets outside.
Product Features:
Capacity: 900L
Glass door refrigerated cabinet
Compressor:Embraco
Digital controller: Dixell
Auto Defrost Function
Working Temp: -20°C to -17°C
40°C ambient temperature
Cooling Type: Fan Forced
Net Weight 145Kg
Dimensions: 1200mmW x 770D x 1950H
Power Requirements: 240V 50Hz, 741W
Dimensions: 1200(W) x 730(D) x 1955(H)mmWarranty: 48 Months Parts & 24 Labour
Sturdy and efficient, the Atosa Top Mounted Single Glass Door Freezer with light box is a refrigeration and display solution that is built to last. Featuring a robust exterior and interior stainless steel construction, this fridge is fitted with heavy duty Embraco compressor units, is equipped with a Dixell digital temperature control system, and arrives with pre-installed shelves and castors for ease of use and mobility. Its refrigerated cabinet sports a glass door for visibility, ideal for visual merchandising while you have peace of mind that the fan-forced cooling system keeps your products chilled no matter how hot it gets outside.
Product Features:
Capacity: 410L
Glass door refrigerated cabinet
Compressor:Embraco
Digital controller: Dixell
Auto Defrost Function
Working Temp: -20°C to -17°C
40°C ambient temperature
Cooling Type: Fan Forced
Net Weight 95Kg
Dimensions: 600mmW x 787D x 1950H
Power Requirements: 240V 50Hz, 454W
Dimensions: 600(W) x 730(D) x 1955(H)mmWarranty: 48 Months Parts & 24 Labour
The Atosa MBF8002 is a top-mounted double-door upright storage freezer that gives busy commercial kitchens 1300 L of solid-door frozen storage in a stainless steel cabinet, with the heavy-duty Embraco compressor deck mounted on top to stay clear of floor-level dust and to maximise usable interior space. Two self-closing, stay-open solid doors, pre-installed mid-shelves sized for GN pans and pre-fitted castors make it a hard-working freezer for restaurants, QSR sites and food production kitchens that need durable bulk frozen storage they can roll into place.Why operators choose the MBF8002
1300 L freezer capacity behind two solid doors — enough bulk frozen storage to consolidate proteins, par-bakes and ice on a single footprint instead of running multiple smaller units.
Top-mounted heavy-duty Embraco compressor — refrigeration deck sits up top, away from floor dust and mop splash, which generally extends compressor service life in busy back-of-house environments.
Stainless steel exterior and interior with rounded internal corners — commercial-grade build that wipes down fast and stands up to daily cleaning schedules.
Self-closing, stay-open solid doors with magnetic gaskets and recessed handles — doors pull themselves shut to protect the cold chain, then hold open on demand when staff are loading stock.
Carel digital controller — clear front-facing readout and setpoint control so kitchen staff can monitor and adjust the cabinet without guesswork.
Pre-installed mid-shelves sized for GN pans — arrives ready to load with standard gastronorm trays, no add-on shelving order required to start using it.
Pre-installed castors with standard safety door lock — mobile for cleaning and reconfiguration, and lockable when the kitchen closes.
48-month warranty cover — 2 years parts and labour, plus an additional 2 years on compressor and motor parts on registration.
Specifications
Brand
Atosa
Model / MPN
MBF8002
SKU
MBF8002-SM
Type
Upright Storage Freezer
Capacity
1300 L
Number of Doors
2
Door Type
Solid, self-closing and stay-open
Compressor
Top-mounted heavy-duty Embraco
Controller
Carel digital
Construction
Stainless steel exterior and interior, rounded internal corners
Door hardware
Recessed handle, magnetic gaskets, standard safety door lock
Shelving
Pre-installed mid-shelves (GN-pan compatible)
Mobility
Pre-installed castors
Ambient temperature rating
43°C
Power supply
240 V, 50 Hz, 950 W
Product dimensions (W x D x H)
1314 x 800 x 2075 mm
Packed dimensions (W x D x H)
1370 x 860 x 2110 mm
Net weight
185 kg
Packed weight
210 kg
Country of manufacture
China
Warranty
48 months (2 years parts & labour + 2 years compressor / motor parts on registration)
Venue suitabilityThe MBF8002 suits high-volume kitchens that need bulk frozen storage on a single footprint — full-service restaurants, hotels, clubs, pubs, QSR sites, convenience and supermarket retail, food production, accommodation, schools, aged care and bakeries all fit the brief. The 1300 L cabinet and twin-door layout earn their place where a single under-bench or solo-door upright would force constant restocking; for smaller cafes or sites with tight floor plans, a one-door upright or under-bench freezer is the better-sized choice.For more cold storage options, browse our full range of Commercial Upright Freezers or view the complete Commercial Freezers range.Installation & deliveryRuns on a standard 240 V, 50 Hz single-phase supply (950 W) — no special wiring required. Allow 100 mm clearance around the cabinet for ventilation, and remove the compressor transit bracket before first use. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by Atosa's 48-month cover (2 years parts & labour plus 2 years compressor / motor parts on registration).Frequently asked questionsHow much frozen storage does the MBF8002 actually give me?1300 L of usable freezer volume behind two solid self-closing doors — enough for bulk proteins, par-bakes, ice and frozen prep on a single 1314 mm-wide footprint.Why is the compressor on top instead of underneath?A top-mounted refrigeration deck sits above floor-level dust, grease and mop splash, which generally extends compressor service life in busy commercial kitchens and frees up the floor under the cabinet.What temperature does this freezer hold?It is built as a storage freezer for frozen product, which in Australia typically means holding around −18°C in line with food-safety guidance. For background on safe holding temperatures, see our guide to commercial fridge and freezer types.What are the external dimensions and weight?1314 mm wide x 800 mm deep x 2075 mm high, with a net weight of 185 kg. Packed dimensions are 1370 x 860 x 2110 mm at 210 kg — worth checking against your loading-dock and doorway clearances before delivery.What power supply does it need?A standard single-phase 240 V, 50 Hz outlet rated for the 950 W load — no three-phase or hard-wiring is required, so it plugs in like other single-phase commercial fridges and freezers.Is a top-mounted upright freezer energy-efficient?Top-mount designs draw cooler ambient air into the condenser, which generally helps efficiency compared with bottom-mount units in hot back-of-house environments. Our overview of commercial fridge and freezer energy efficiency explains the key factors.What is included in the box?The cabinet ships with pre-installed mid-shelves sized for GN pans, pre-fitted castors and a standard safety door lock. A compressor transit bracket is fitted for shipping and must be removed before the unit is switched on.What warranty cover comes with the MBF8002?48 months total: 2 years parts and labour as standard, plus an additional 2 years on compressor and motor parts when you register the unit with the supplier after installation.
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Four Door Freezer Table is an ideal solution combining a spacious work surface with storage for frozen food products. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C C to -18°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 145Kg
Dimensions: 2230mmW x 700D x 838H
Power Requirements: 220V 50Hz; 550W; 3A
Dimensions: 2230(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Three Door Freezer Table is an ideal solution combining a spacious work surface with storage for frozen food products. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 450L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C C to -18°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 145Kg
Dimensions: 1795mmW x 700D x 838H
Power Requirements: 220V 50Hz; 300W; 3.0A
Dimensions: 1795(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Two Door Freezer Table is an ideal solution combining a spacious work surface with storage for frozen food products. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 280L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C C to -18°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 119Kg
Dimensions: 1360mmW x 700D x 838H
Power Requirements: 220V 50Hz; 300W; 2.5A
Dimensions: 1360(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Ideal for bakeries, cafes and take-away restaurants, the Atosa 1700mm Free-Standing Square Cake Showcase creates an appetizing and stylish product display. Its two shelves plus floor offer maximum exposure over 3 levels including a generous 570L capacity, as well as LED lights for optimal visibility. Refrigerated at 2°C to 8°C, it keeps cakes cool, with the heated glass preventing condensation. It is fitted with a SECOP compressor and Italian digital controls, as well as removable sliding back doors and castors for easy accessibility and mobility.
Product Features:
Capacity: 570L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: 2°C to 8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX2000 (optional)
Net Weight 383Kg
Dimensions: 1700mmW x 742D x 1200H
Power Requirements: 240V 50Hz; 920W
Dimensions: 1700(W) x 742(D) x 1200(H)mmWarranty: 48 Months Parts & 24 Labour
Ideal for bakeries, cafes and take-away restaurants, the Atosa 1700mm Free-Standing Round Cake Showcase creates an appetizing and stylish product display. Its three shelves plus floor offer maximum exposure over 4 levels including a generous 600L capacity, as well as LED lights for optimal visibility. Refrigerated at 2°C to 8°C, it keeps cakes cool, with the heated glass preventing condensation in warmer and more humid climates. It is fitted with a SECOP compressor and Italian digital controls, as well as removable sliding back doors and castors for easy accessibility and mobility.
Product Features:
Capacity: 600L
Stylish Round glass cake displays
Available in 900/1200/1500/1700 with sizes
Comes with 3 shelves for maximum exposure plus the floor
4 levels to display your products
Working Temp: 2°C to 8°C
Ambient Temp: 43°C
Keep your products nice & cool
Sliding removable back doors
Italian Digital controls
SECOP compressor
LED lights
Healed glass to remove condensation
Fitted with castors for easy mobility
Net Weight 318Kg
Dimensions: 1700mmW x 750D x 1350H
Power Requirements: 240V 50Hz; 900W
Dimensions: 1700(W) x 750(D) x 1350(H)mmWarranty: 48 Months Parts & 24 Labour
Ideal for bakeries, cafes and take-away restaurants, the Atosa 1500mm Free-Standing Square Cake Showcase creates an appetizing and stylish product display. Its two shelves plus floor offer maximum exposure over 3 levels including a generous 497L capacity, as well as LED lights for optimal visibility. Refrigerated at 2°C to 8°C, it keeps cakes cool, with the heated glass preventing condensation. It is fitted with a SECOP compressor and Italian digital controls, as well as removable sliding back doors and castors for easy accessibility and mobility.
Product Features:
Capacity: 497L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: 2°C to 8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX2000 (optional)
Net Weight 262Kg
Dimensions: 1500mmW x 742D x 1200H
Power Requirements: 240V 50Hz; 800W
Dimensions: 1500(W) x 742(D) x 1200(H)mmWarranty: 48 Months Parts & 24 Labour