Pizza prep fridges for pizzerias, cafes and venues building pizza to order — refrigerated prep counters with a chilled topping well across the top and cold storage below, so your sauce, cheese and toppings sit within arm's reach at safe temperature through a full service. This range spans compact two-door benches through to three-door units with deep saladette pans, and includes counters configured for salad and sandwich prep as well. For the wider category, browse all countertop prep fridges or step up to our full commercial refrigeration range.
Who pizza prep counters are for
If you assemble food on a line — pizza, salads, sandwiches, burgers — a refrigerated prep counter pays for itself in speed. Pizzerias run them as the heart of the make line: dough on the bench, toppings in the well, finished pizza straight to the oven. Cafes and quick-service venues use the same format for salads and sandwiches, holding prepped ingredients cold and visible so staff build orders without trips to the walk-in. Caterers and food trucks lean on the under-counter storage to carry a full day's mise en place in one footprint. In an Australian kitchen that climbs past 30°C on a busy summer night, keeping toppings below 5°C on the bench is a food-safety requirement, not a nicety.
What's in scope
Two-door pizza prep counters
The compact workhorse — two refrigerated doors below, a topping well above, in a bench that fits a tight make line. Suits single-oven pizzerias, cafes and food trucks where space is the constraint.
Three-door prep counters
Longer benches with three doors of cold storage and a wider topping rail, built for higher-volume pizza and salad lines that turn over a lot of prepped product through peak service.
Counters with a saladette top
Models with a recessed pan rail across the top — the saladette — sized to standard gastronorm pans so you can drop in toppings, dressings and salad components and swap them out fast. Some run a hinged lid or glass guard to hold the cold and meet hygiene needs on a self-serve or open line. These configurations cross over into salad bar fridges for buffet and self-service setups.
How to choose a pizza prep fridge in three steps
Getting the right counter comes down to three questions, answered in order.
Step 1 — Measure your bench length
The counter has to fit your make line without blocking traffic to the oven. Measure the run of bench you can give it, then match that to a two- or three-door model. Buy the length your line needs, not the biggest unit that fits — an oversized counter wastes both floor space and the energy to chill it.
Step 2 — Count your topping pans
Work out how many ingredients you hold on the line at once and how often you refill them. That sets the number and depth of gastronorm pans you need in the well. A busy pizza line with a dozen toppings needs a wider rail and deeper pans than a cafe running four salad components — size the well to your menu, then check the under-counter doors hold a service's worth of backup stock.
Step 3 — Check the refrigeration spec
Confirm the unit holds the well and the cabinet at safe cold temperature in your kitchen's real conditions, not a showroom's. Look at the listed operating range, whether the well is refrigerated or relies on chilled air from below, and the power requirement — most counters run from a standard 10-amp outlet, but larger three-door units can need a dedicated circuit. Each product page lists the model's specifications.
Planning the whole make line, not just the fridge? Our guide to prep tables, pan layouts and cold rails walks through laying out a station for faster mise en place.
A pizza prep fridge is a refrigerated prep counter with a chilled topping well across the top and cold storage cabinets below. Toppings sit in gastronorm pans in the well at safe temperature within reach of the make line, while sauce, cheese and backup stock stay cold in the doors underneath — so staff can build pizzas to order without leaving the bench.
What's the difference between a pizza prep fridge and a salad prep fridge?
They share the same format — a refrigerated counter with a topping well over under-counter storage — and many units suit both jobs. The difference is usually the well configuration: pizza counters often run a wider rail for more toppings, while salad and sandwich counters may use a hinged lid or glass guard. Choose by your menu and how many pans you need on the line, not by the label.
What temperature should a pizza prep fridge run at?
Under Australian food-safety guidance, cold food should be held at or below 5°C, so a prep counter is built to keep both the topping well and the cabinet in that range. In a hot kitchen the well is the part that struggles, so keep pans topped up but not overfilled above the cold line, and close any lid or guard between rushes to hold the temperature.
How many doors do I need on a pizza prep counter?
Match the doors to your bench length and storage needs. A two-door counter suits a single-oven pizzeria, a cafe or a food truck where space is tight; a three-door counter gives a longer topping rail and more under-counter storage for higher-volume lines that turn over a lot of prepped product through service.
Does the topping well need its own refrigeration?
It depends on the model. Some counters refrigerate the well directly; others chill it with cold air drawn from the cabinet below. Both can hold food safely, but in a warm Australian kitchen a directly refrigerated well copes better through a long, busy service — check each product's specification for how its well is cooled.
Can I use a pizza prep fridge for salads and sandwiches?
Yes. The refrigerated-counter format works for any build-to-order line — salads, sandwiches, burgers, poke bowls — because the chilled well holds prepped ingredients within reach. Many of the counters in this range are sold for salad and sandwich prep as much as pizza. If your menu is salad-led, our undercounter fridges are worth a look for extra cold backup storage near the line.
Do you deliver pizza prep fridges across Australia?
Yes. Commercial Kitchen Store ships nationwide, and Australian-based phone support is available on 1300 111 901 if you need help sizing a counter to your make line. For cover details, see our warranty and service information.
The Thermaster PG150FA-B is a two-door salad and prep bar fridge designed to hold pre-chilled ingredients at service temperature across high-volume commercial kitchens, cafes, and food preparation benches. Running at +1 to +5°C with cross-flow blown-well pan cooling, it keeps four full-size GN pans evenly chilled throughout service.
Why operators choose the PG150FA-B
Cross-flow blown-well cooling — even temperature distribution across all four GN pan positions, no hot spots during service
Auto defrost & automatic condensation evaporation — reduces manual maintenance between services
Removable refrigeration cassette — makes cleaning and servicing straightforward without dismantling the unit
Digital controls & read-out — precise temperature monitoring at a glance; Secop compressor for reliability
Heavy-duty castors (2 lockable) — reposition on the fly; acrylic clear night covers included for closing-time hygiene
Specifications
Brand
Thermaster
Model / MPN
PG150FA-B
Type
Salad / Noodle / Sandwich Prep Bar Fridge
GN Pan Configuration
4 x 1/1 GN
Doors
2
Door Type
Solid
Temperature Range
+1 to +5°C
Power
240V; 716W (0.716 kW)
Construction
Stainless Steel
Product Dimensions (W x D x H)
1460 x 790 x 850mm
Packed Dimensions (W x D x H)
1550 x 840 x 1370mm
Net Weight
170 kg
Packed Weight
196 kg
Warranty
2 Years Parts and Labour + 2 Years Parts Only with Product Registration
Country of Manufacture
China
Venue suitability: Ideal for restaurants, cafes, sandwich bars, sushi counters, salad bars, canteens, club kitchens, and any food service venue needing a bench-height refrigerated prep station. GN pans not included — pre-chill product to below 5°C before loading.
Explore our full range of Salad Bar Fridges or browse all Thermaster refrigeration equipment to find the right unit for your operation.
Installation & delivery: The PG150FA-B ships fully assembled on heavy-duty castors. Ensure a minimum 200mm clearance at the rear for ventilation. Single-phase 240V connection required. Dispatched Australia-wide.
Frequently asked questions
Q: Do GN pans come included with the PG150FA-B?A: No — GN pans are not included. The unit accommodates four standard 1/1 GN pans (up to 150mm deep). Pans must be purchased separately.
Q: Does product need to be pre-chilled before loading?A: Yes. The PG150FA-B is a holding unit — product must be pre-chilled to below 5°C before being placed in the GN pans. It is not designed to bring warm product down to temperature.
Q: What is the temperature range of the PG150FA-B?A: The unit operates at +1 to +5°C, suitable for chilled food service of salads, sandwich ingredients, and noodle bar toppings.
Q: Is the refrigeration unit removable for cleaning?A: Yes — the unit features a removable refrigeration cassette, making it straightforward to clean and service without dismantling the whole cabinet.
Q: What power supply does the PG150FA-B require?A: Standard single-phase 240V Australian mains supply. Power draw is 716W (0.716 kW).
The FED-X XGNS1300E is a three-door refrigerated salad and sandwich prep fridge designed to keep ingredients at safe serving temperature while giving operators direct access to 8 GN1/6 pan slots at the granite worktop — ideal for high-throughput service in restaurants, cafes, pubs, clubs, and pizza kitchens.Why operators choose the XGNS1300E
402 L net capacity with three storage zones — each door accesses a GN1/1-compatible shelf, maximising below-bench cold storage for bulk ingredients.
Granite stone worktop with 8 x GN1/6 pan slots — chilled toppings, garnishes, and sauces sit at hand height, reducing reach and speeding up service.
-2 to +8°C operating range — covers deli meats, dairy, produce, and sauces within AU food-safety requirements without manual adjustment.
R290 natural refrigerant with Embraco/Secop compressor — lower GWP, proven reliability, and Dixell digital controller for accurate temperature management.
Stainless steel interior and exterior with rounded corners — wipes down in seconds; replaceable magnetic door seals and heavy-duty castors for repositioning.
Specifications
Brand
FED-X
Model / MPN
XGNS1300E
Type
Salad / Sandwich Prep Bar Fridge
Net Capacity
402 L
GN Pan Slots (top)
8 x GN1/6
Under-bench GN Compatibility
GN1/1 per door (1 shelf per door)
Temperature Range
-2 to +8°C
Ambient Operating Temp
32°C, 60% RH
Cooling System
Static cooling
Refrigerant
R290
Compressor
Embraco / Secop
Controller
Dixell digital
Power
240V; 50Hz; 10A; 255W
Worktop Material
Granite stone
Construction
Stainless steel interior & exterior
Doors
3 hinged solid doors
Door Seals
Heavy duty, replaceable magnetic
Weight per Shelf
40 kg max
Product Dimensions (W x D x H)
1368 x 700 x 1107mm
Internal Dimensions (W x D x H)
1295 x 595 x 455mm
Packed Dimensions (W x D x H)
1390 x 730 x 1260mm
Net Weight
182 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice)
Venue suitability: The XGNS1300E suits any commercial kitchen requiring a bench-level prep station — pizza restaurants, sandwich bars, deli counters, hotel kitchens, school canteens, and busy pub kitchens. The granite worktop and open pan rail support continuous service without re-plating. Browse the full range of Salad Bar Fridges or explore all FED-X refrigeration at Commercial Kitchen Store.Installation & delivery: Place unit on a level surface with adequate clearance at the rear (unit can be positioned against the wall). Pans and lids are not included — pan and pan cover must be used to maintain correct operating temperature. Storage area below is GN1/1 compatible. Dispatched Australia-wide.Frequently asked questionsAre GN pans included with the XGNS1300E?No — pans and lids are sold separately. GN1/6 pans fit the top rail (8 slots); GN1/1 pans fit the under-bench compartments. Pan covers must be in place to maintain correct operating temperature.What refrigerant does the XGNS1300E use?The XGNS1300E uses R290 (propane), a natural refrigerant with a low global warming potential. It is pre-charged at the factory and should only be serviced by a licenced refrigeration technician.Can the unit be placed against the wall?Yes — the XGNS1300E is designed to be wall-mounted against a flat surface without requiring rear clearance for ventilation. The condenser is front-accessed.What warranty does the XGNS1300E carry?The unit carries 2 Years Parts and Labour plus 2 Years Parts Only, provided the product is registered with FED-X within 14 days of invoice. See the FED-X warranty terms for full conditions.What is the operating temperature range?The XGNS1300E operates between -2°C and +8°C, suitable for deli meats, dairy, produce, and cold sauces within AU food safety guidelines. Maximum ambient operating temperature is 32°C at 60% relative humidity.
The FED-X XGNS900D is a two-door refrigerated sandwich and salad prep fridge designed for commercial kitchens that need reliable cold ingredient storage and a ready-access GN pan rail on the prep line. The stainless steel cabinet holds 240L gross, with 5 x GN 1/6 pan positions in the refrigerated top trough keeping toppings and condiments cool during service.Why operators choose the XGNS900D
Integrated GN pan trough — 5 x GN 1/6 pan slots in the refrigerated top keep ingredients within arm's reach during peak service periods
Fan-assisted cooling — consistent +2 to +8°C temperature across the 240L cabinet, driven by an Embraco/Secop compressor with Dixell digital controller
Full stainless steel construction — interior and exterior in stainless steel with rounded internal corners for fast, hygienic cleaning after each service
Replaceable magnetic door seals — both hinged doors seal tightly; seals can be replaced on-site without specialist tools
Mobile and wall-friendly — heavy-duty castors allow repositioning; unit can be placed against the wall for efficient kitchen layouts
Specifications
Brand
FED-X
Model / MPN
XGNS900D
Type
Salad / Sandwich Prep Fridge
Doors
2
Door Type
Hinged
Gross Capacity
240 L
GN Pan Capacity (top rail)
5 x GN 1/6 slots (pans & lids not included)
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C, 60% RH
Cooling System
Fan-assisted
Refrigerant
R600A
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V / 50Hz / 10A / 170W
Construction
Stainless Steel (interior & exterior)
Weight Loading per Shelf
40 kg
Net Weight
81 kg
Product Dimensions (W x D x H)
903 x 700 x 1020 mm
Internal Dimensions (W x D x H)
830 x 595 x 455 mm
Packed Dimensions (W x D x H)
930 x 730 x 1160 mm
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: The XGNS900D suits restaurants, cafes, pizza shops, sandwich bars, and food service operations where cold ingredient access at the prep station is essential. Its 903 mm width fits standard commercial prep-line configurations. Browse all Salad Bar Fridges or explore the full FED-X commercial refrigeration range.Installation & delivery: No plumbing required — plug-in 240V single phase. Unit can be placed against the wall. Pan and pan cover must be used to maintain correct operating temperature; pans and lids are not included. Dispatched Australia-wide.Frequently asked questionsWhat is the storage capacity of the XGNS900D?The XGNS900D has a gross capacity of 240L. The refrigerated top trough accommodates 5 x GN 1/6 pans for ingredient storage during service.How many GN pans fit in the refrigerated top rail?The open-top refrigerated rail holds 5 x GN 1/6 pan positions. Pans and lids are not included with the unit and must be purchased separately; pan and cover must be fitted to ensure correct operating temperature.What refrigerant does the XGNS900D use?It uses R600A refrigerant, with an Embraco/Secop compressor and Dixell digital temperature controller for precise, reliable performance.What is the operating temperature range?The unit maintains +2 to +8°C and is rated for use in ambient conditions up to 38°C at 60% relative humidity.What warranty is included?The XGNS900D comes with 2 Years Parts & Labour plus 2 Years Parts Only, provided the product is registered within 14 days of the invoice date.
The FED-X XGNS1300S is a three-door salad and sandwich prep fridge designed for high-volume commercial kitchens. It holds four full-size GN pans in the open top well and provides a chilled working surface at +2 to +8°C, making it ideal for pizza, salad bar, and deli-prep stations.Why operators choose the XGNS1300S
218L net capacity — a practical, accessible refrigerated storage volume beneath the prep surface.
4 x 1/1 GN pan capacity — works with your existing GN pan inventory for fast ingredient changes (pans and lids sold separately).
+2 to +8°C static cooling — consistent temperature across the cabinet without fan-forced airflow drying ingredients.
R290 natural refrigerant — low global-warming potential, compliant with current AU/NZ refrigerant direction.
Stainless steel interior and exterior — rounded internal corners for fast, thorough cleaning; integrated stainless lid and cutting board included.
Specifications
Brand
FED-X
Model / MPN
XGNS1300S
Type
Salad / Sandwich Prep Bar Fridge
Net Capacity
218 L
Gross Capacity
368 L
Doors
3
Door Type
Hinged
GN Pan Capacity
4 x 1/1 GN (pans & lids not included)
Cooling System
Static cooling
Temperature Range
+2 to +8°C
Refrigerant
R290
Compressor
Cubigel
Controller
Dixell digital
Ambient Temperature
38°C, 60% RH (max)
Power
240V; 50Hz; 10A; 240W
External Material
Stainless Steel
Internal Dimensions
1295 x 595 x 455mm
Product Dimensions (W x D x H)
1368 x 700 x 898mm
Packed Dimensions (W x D x H)
1390 x 730 x 1050mm
Net Weight
115 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Suited to pizza restaurants, sushi bars, sandwich shops, cafes, delis, and catering operations requiring a high-volume, always-accessible prep refrigeration station. The three-door configuration gives multiple staff members simultaneous access without compromising cold-chain. Explore the full range in our Salad Bar Fridges collection, or browse all FED-X refrigeration for compatible accessories.Installation & delivery: Single-phase 240V connection (10A standard GPO). Unit can be placed against the wall — rear ventilation not required. Castors included for repositioning. Dispatched Australia-wide.Frequently asked questionsWhat is the difference between the 218L and 368L capacity figures?218L is the net usable refrigerated storage volume inside the base cabinet. 368L is the gross (total) volume including all internal structures. The 218L figure is what matters for practical ingredient storage.Are the GN pans and lids included?No — the XGNS1300S accommodates 4 x full-size (1/1) GN pans, but pans and lids are sold separately. The stainless steel integrated lid that covers the top prep rail is included.What refrigerant does this unit use?R290 (propane), a natural refrigerant with a very low global-warming potential. It is fully compliant with current Australian refrigerant regulations.Can this unit be positioned against a wall?Yes — the XGNS1300S is designed to be placed against a wall. Condensing unit ventilation is front-mounted, so no rear clearance is required.What warranty is provided?The XGNS1300S carries a 2-year Parts & Labour warranty plus a further 2-year Parts-Only warranty, provided the product is registered within 14 days of invoice. Total cover: 4 years with registration.
The FED-X XSS8C20S3V is a 580-litre three-door refrigerated sandwich and salad prep counter designed for high-volume commercial kitchens. Featuring a fan-forced cooling system, R290 natural refrigerant, and stainless steel interior and exterior, it maintains a +2 to +8°C operating temperature to keep ingredients fresh through a full service.
Why operators choose the XSS8C20S3V
8-pan top rail — accommodates 1/3 GN pans up to 150mm deep for mise en place-ready prep
Fan-forced cooling with Ebm-Papst fans — rapid temperature recovery even during heavy door traffic
R290 refrigerant — low global-warming-potential hydrocarbon, CFC and HFC free, tropicalised for Australian ambient conditions up to 43°C
Self-closing doors with heavy-duty magnetic seals — reduce cold air loss and maintain consistent temperature
Display top holds temperature for up to 4 hours — from a pre-chilled environment, supporting service continuity
Dixell digital controller — user-friendly, precise temperature management with rapid recovery rate
Specifications
Brand
FED-X
Model / MPN
XSS8C20S3V
Type
Salad / Sandwich Prep Bar Fridge
Capacity
580 L
Doors
3 hinged, self-closing
GN Pan Compatibility
1/3 GN pans up to 150mm deep (top rail); GN 1/1 shelf per door
Temperature Range
+2 to +8°C
Refrigerant
R290
Cooling System
Fan forced
Compressor
Cubigel
Controller
Dixell digital
Power
240V; 50Hz; 10A; 320W
Power Type
Electric
Construction
Stainless steel interior & exterior with rounded corners
Insulation
60mm HFC & CFC-free foam body
Shelf Load Capacity
40 kg per shelf
Max Ambient Temperature
43°C at 60% RH
Internal Dimensions
1459 x 680 x 564mm
Product Dimensions
2020(W) x 800(D) x 1406(H)mm
Package Dimensions
2055(W) x 730(D) x 1160(H)mm
Net Weight
150 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Suited to sandwich bars, cafes, delis, hotels, and any high-volume kitchen requiring a generous 580-litre refrigerated prep line. The three-door configuration keeps the full prep station within arm's reach. Browse the full range in our Salad Bar Fridges collection, or explore all FED-X commercial refrigeration.
Installation & delivery: The XSS8C20S3V ships on heavy-duty castors with front wheel brakes, ready for immediate placement. Single-phase 240V connection — no special electrical work required. Dispatched Australia-wide.
Frequently asked questions
What size GN pans fit in the top rail?The top rail accommodates 1/3 GN pans up to 150mm deep. Each of the three door compartments also includes one shelf compatible with GN 1/1 pans.
What refrigerant does the XSS8C20S3V use?It uses R290, a natural hydrocarbon refrigerant that is HFC and CFC free with a very low global warming potential. It is tropicalised and tested for Australian ambient conditions up to 43°C.
Is a special power connection required?No. The unit runs on standard single-phase 240V / 50Hz / 10A — a standard commercial GPO is sufficient.
What warranty applies?FED-X provides 2 years parts and labour plus a further 2 years parts-only coverage, provided the unit is registered within 14 days of invoice.
How long does the display top hold temperature?The display top is designed to hold temperature for up to 4 hours from a pre-chilled environment, supporting continuity of service during busy periods.
The FED-X XSS8C15S2V is a two-door sandwich and salad prep counter designed for commercial kitchens that need refrigerated ingredient access and GN pan compatibility at the prep line. With 390L of capacity and a top rail holding 8 x 1/3 GN pans up to 150mm deep, it keeps ingredients chilled and within reach throughout service.
Why operators choose the XSS8C15S2V
Integrated GN pan rail — holds 8 x 1/3 GN pans up to 150mm deep across the top, keeping sandwich and salad ingredients chilled and at eye level; 1 shelf per door below, GN 1/1 compatible.
Consistent +2 to +8°C across two compartments — Dixell digital controller with fan-forced Cubigel compressor maintains food-safe temperatures in ambient conditions up to 43°C.
Tropicalised for Australian kitchens — rated to 43°C ambient at 60% RH, self-closing doors with heavy-duty magnetic seals, and R290 refrigerant in 60mm HFC/CFC-free foam insulation.
Stainless steel interior and exterior — rounded corners throughout for fast cleaning compliance; Ebm-papst evaporator and condenser fans, heavy-duty castors with front wheel brakes.
Display top holds temperature for up to 4 hours — pre-chilled environment keeps the top rail cold without power for short periods; useful during transport or power interruptions.
Specifications
Brand
FED-X
Model / MPN
XSS8C15S2V
Type
Sandwich / Salad Prep Bar Fridge
Capacity
390 L
Doors
2 × solid hinged, self-closing
GN Pan Rail (Top)
8 × 1/3 GN pans up to 150mm deep
Shelf per Door
1 × GN 1/1 compatible shelf per door
Temperature Range
+2 to +8°C
Ambient Temperature
43°C (60% RH)
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Cubigel
Controller
Dixell (digital)
Power
240V / 50Hz / 10A / 320W
External Dimensions
1510(W) × 800(D) × 1406(H)mm
Internal Dimensions
949 × 680 × 564mm
Packed Dimensions
1540(W) × 830(D) × 1160(H)mm
Net Weight
120 kg
Weight Loading per Shelf
40 kg
Body Insulation
60mm HFC/CFC-free foam
Material
Stainless Steel
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Suited to cafes, sandwich shops, delis, hotel kitchens, catering operations, and any commercial venue where rapid sandwich or salad assembly demands chilled ingredient access at the prep line. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection.
Installation & delivery: This unit ships on heavy-duty castors with front wheel brakes and can be positioned at any prep station. Ensure a 240V / 10A single-phase supply is available. Dispatched Australia-wide.
Frequently asked questions
How many GN pans does the top rail hold?The top rail holds 8 x 1/3 GN pans up to 150mm deep simultaneously. Each door section below includes one GN 1/1-compatible shelf for additional ingredient storage.
Can this unit handle a hot Australian kitchen environment?Yes. The XSS8C15S2V is tropicalised and rated to operate in ambient temperatures up to 43°C at 60% relative humidity — suitable for Australian kitchen conditions year-round.
What refrigerant does the XSS8C15S2V use?It uses R290 (propane-based), a natural refrigerant with a very low global-warming potential. The unit body uses 60mm HFC/CFC-free foam insulation, compliant with Australian environmental standards.
Does the display top stay cold during a power interruption?Yes. The display top is designed to hold temperature for up to 4 hours from a pre-chilled environment, which provides a buffer during short power interruptions or transport.
What does the warranty cover and how do I register?The XSS8C15S2V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of invoice. Registration is required to activate the full term.
The FED-X XSS7C13S2V is a two-door sandwich and salad prep counter designed for commercial kitchens that need refrigerated ingredient access and GN pan compatibility at the prep line. With 259L of net capacity and a top rail holding 7 x 1/3 GN pans up to 150mm deep, it keeps ingredients chilled and within reach throughout service.
Why operators choose the XSS7C13S2V
Integrated GN pan rail — holds 7 x 1/3 GN pans up to 150mm deep across the top, keeping sandwich and salad ingredients chilled and at eye level; 1 shelf per door below, GN 1/1 compatible.
Consistent +2 to +8°C across two compartments — Dixell digital controller with fan-forced Cubigel compressor maintains food-safe temperatures in ambient conditions up to 43°C.
Tropicalised for Australian kitchens — rated to 43°C at 60% RH, self-closing doors with heavy-duty magnetic seals, and R290 refrigerant in 60mm HFC/CFC-free foam insulation.
Stainless steel interior and exterior — rounded corners throughout for fast cleaning compliance; EBM-PAPST evaporator and condenser fans, heavy-duty castors with front wheel brakes.
Display top holds temperature for up to 4 hours — pre-chilled environment keeps the top rail cold without power for short periods; useful during transport or power interruptions.
Optional drawer configuration — 2 and 3-drawer units available in lieu of doors for high-volume prep setups where drawer access is preferred.
Specifications
Brand
FED-X
Model / MPN
XSS7C13S2V
Type
Sandwich / Salad Prep Bar Fridge
Net Capacity
259 L
Gross Capacity
282 L
Doors
2 × solid hinged, self-closing
GN Pan Rail (Top)
7 × 1/3 GN pans up to 150mm deep
Shelf per Door
1 × GN 1/1 compatible shelf per door
Temperature Range
+2 to +8°C
Ambient Temperature
43°C (60% RH)
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Cubigel
Controller
Dixell (digital)
Power
240V / 50Hz / 10A / 320W
External Dimensions
1360(W) × 700(D) × 1406(H)mm
Internal Dimensions
799 × 580 × 564mm
Packed Dimensions
1390(W) × 730(D) × 1160(H)mm
Net Weight
104 kg
Weight Loading per Shelf
40 kg
Body Insulation
60mm HFC/CFC-free foam
Material
Stainless Steel
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Suited to cafes, sandwich shops, delis, hotel kitchens, catering operations, and any commercial venue where rapid sandwich or salad assembly demands chilled ingredient access at the prep line. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection.
Installation & delivery: This unit ships on heavy-duty castors with front wheel brakes and can be positioned at any prep station. Ensure a 240V / 10A single-phase supply is available. Dispatched Australia-wide.
Frequently asked questions
What is the difference between the 259L net and 282L gross capacity?Gross capacity is the total interior volume before accounting for insulation thickness, shelving rails, and the GN pan top rail compartment. Net capacity (259L) is the usable refrigerated storage — always size on net figures for food storage planning.
How many GN pans does the top rail hold?The top rail holds 7 x 1/3 GN pans up to 150mm deep simultaneously. Each door section below includes one GN 1/1-compatible shelf for additional ingredient storage.
Can this unit handle a hot kitchen environment?Yes. The XSS7C13S2V is tropicalised and rated to operate in ambient temperatures up to 43°C at 60% relative humidity — suitable for Australian kitchen conditions year-round.
What refrigerant does the XSS7C13S2V use?It uses R290 (propane-based), a natural refrigerant with a very low global-warming potential. The unit body uses 60mm HFC/CFC-free foam insulation, compliant with Australian environmental standards.
What does the warranty cover and how do I register?The XSS7C13S2V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of invoice. Registration is required to activate the full term.
The FED-X XSS7C18S3V is a three-door sandwich and salad prep counter designed for busy commercial kitchens that need refrigerated ingredient access and GN pan compatibility at the prep line. With 400L of net capacity and a top rail accommodating 8 x 1/3 GN pans up to 150mm deep, it keeps ingredients chilled and within reach during high-volume service.
Why operators choose the XSS7C18S3V
Integrated GN pan rail — holds 8 x 1/3 GN pans up to 150mm deep across the top, keeping sandwich and salad ingredients chilled and at eye level; 1 shelf per door below, GN 1/1 compatible.
Consistent +2 to +8°C across three compartments — Dixell digital controller with fan-forced Cubigel compressor maintains food-safe temperatures even in ambient conditions up to 43°C.
Tropicalised for Australian kitchens — rated to 43°C ambient at 60% RH, self-closing doors with heavy-duty magnetic seals, and R290 refrigerant in 60mm HFC/CFC-free foam insulation.
Stainless steel interior and exterior — rounded corners throughout for fast cleaning compliance; Ebm-papst evaporator and condenser fans, heavy-duty castors with front wheel brakes.
Display top holds temperature for up to 4 hours — pre-chilled environment keeps the top rail cold without power for short periods; useful during transport or power interruptions.
Specifications
Brand
FED-X
Model / MPN
XSS7C18S3V
Type
Sandwich / Salad Prep Bar Fridge
Net Capacity
400 L
Gross Capacity
417 L
Doors
3 × solid hinged, self-closing
GN Pan Rail (Top)
8 × 1/3 GN pans up to 150mm deep
Shelf per Door
1 × GN 1/1 compatible shelf per door
Temperature Range
+2 to +8°C
Ambient Temperature
43°C (60% RH)
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Cubigel
Controller
Dixell (digital)
Power
240V / 50Hz / 10A / 320W
External Dimensions
1795(W) × 700(D) × 1406(H)mm
Internal Dimensions
1234 × 580 × 564mm
Packed Dimensions
1830(W) × 730(D) × 1160(H)mm
Net Weight
130 kg
Weight Loading per Shelf
40 kg
Body Insulation
60mm HFC/CFC-free foam
Material
Stainless Steel
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Suited to cafes, sandwich shops, delis, hotel kitchens, catering operations, and any commercial venue where rapid sandwich or salad assembly demands chilled ingredient access at the prep line. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection.
Installation & delivery: This unit ships on heavy-duty castors with front wheel brakes and can be positioned at any prep station. Ensure a 240V / 10A single-phase supply is available. Dispatched Australia-wide.
Frequently asked questions
What is the difference between the 400L net and 417L gross capacity?Gross capacity is the total interior volume before accounting for insulation thickness, shelving rails, and the GN pan top rail compartment. Net capacity (400L) is the usable refrigerated storage — always size on net figures for food storage planning.
How many GN pans does the top rail hold?The top rail holds 8 x 1/3 GN pans up to 150mm deep simultaneously. Each door section below includes one GN 1/1-compatible shelf for additional ingredient storage.
Can this unit handle a hot kitchen environment?Yes. The XSS7C18S3V is tropicalised and rated to operate in ambient temperatures up to 43°C at 60% relative humidity — suitable for Australian kitchen conditions year-round.
What refrigerant does the XSS7C18S3V use?It uses R290 (propane-based), a natural refrigerant with a very low global-warming potential. The unit body uses 60mm HFC/CFC-free foam insulation, making it compliant with Australian environmental standards.
What does the warranty cover and how do I register?The XSS7C18S3V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of invoice. Registration is required to activate the full term.
The FED-X XGNS1300D is a three-door commercial salad prep fridge designed for high-volume food preparation in professional kitchens. With a 218 L net capacity and a stainless steel hinged lid opening to 8 × GN1/6 pan slots, it keeps ingredients chilled and accessible at the pass.Why operators choose the XGNS1300D
GN-compatible top rail — 8 × GN1/6 pan slots under a hinged stainless steel lid for instant access to garnishes, sauces, and toppings.
Fan-assisted cooling — Dixell digital controller with Embraco/Secop compressor holds a stable +2 to +8°C operating range.
R290 natural refrigerant — low global-warming-potential gas, meeting current environmental standards.
Rounded stainless steel interior — coved corners on all edges make cleaning fast between services; one GN1/1 shelf per door.
Heavy-duty castors — fully mobile; unit can be placed against the wall with rear clearance.
Specifications
Brand
FED-X
Model / MPN
XGNS1300D
Type
Salad/Noodle/Sandwich Prep Bar Fridge
Net Capacity
218 L
Gross Volume
368 L
GN Pan Slots (top)
8 × GN1/6
Shelves
1 × GN1/1 per door
Doors
3 × Hinged Doors
Temperature Range
+2 to +8°C
Max Ambient Temperature
32°C, 60% RH
Refrigerant
R290
Cooling System
Fan-assisted
Compressor
Embraco/Secop
Controller
Dixell (digital)
Power
240V, 240W / 1.6A
Construction
Stainless Steel interior & exterior
Internal Dimensions
1295 × 595 × 455mm
Product Dimensions (W × D × H)
1368 × 700 × 1020mm
Packed Dimensions (W × D × H)
1390 × 730 × 1160mm
Net Weight
104 kg (supplier) / 130 kg (store — verify)
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for restaurants, cafes, pubs, clubs, bars, and pizza shops that need fast topping access at the prep or service line. Browse our full range of Salad Bar Fridges or explore all FED-X refrigeration for complementary units.Installation & delivery: Requires a single-phase 240V/10A GPO. Unit can be positioned against the wall. Allow rear and side airflow clearance as directed in the installation guide. Dispatched Australia-wide.Frequently asked questionsWhat is the net capacity of the XGNS1300D?The XGNS1300D has a net capacity of 218 L across its three compartments. The gross volume is 368 L.Does the XGNS1300D use natural refrigerant?Yes — it uses R290, a natural hydrocarbon refrigerant with a low global warming potential (GWP of 3), compliant with current Australian standards.How many GN pans does the top rail hold?The hinged stainless steel lid opens to eight GN1/6 pan slots. Pans and pan covers are not included and must be sourced separately. Pan covers must be in place during operation to maintain the correct temperature.Can the XGNS1300D be placed against a wall?Yes — the unit is designed to sit flush against the wall. The compressor exhausts appropriately for this configuration; refer to the installation guide for exact clearance requirements.What warranty does the FED-X XGNS1300D carry?The XGNS1300D is covered by 2 years parts and labour plus a further 2 years parts-only coverage — 4 years total — when registered within 14 days of invoice.
The FED-X XGNS900E is a two-door refrigerated sandwich and salad prep fridge designed for small to medium commercial kitchens that need reliable cold storage with an integrated ingredient trough. The granite worktop holds 5 x 1/6th GN pans in an open refrigerated rail, keeping garnishes, toppings, and condiments within arm's reach of the prep line.Why operators choose the XGNS900E
Integrated GN pan trough — 5 x 1/6th GN pan positions in the refrigerated top keep ingredients cold and accessible during service
Fan-assisted cooling — consistent +2 to +8°C temperature throughout the 180L net chamber, driven by an Embraco/Secop compressor and Dixell digital controller
Full stainless steel construction — interior and exterior in stainless steel with rounded internal corners for fast, thorough cleaning between services
Granite worktop — hygienic, easy-to-clean granite prep surface alongside the pan trough; can be placed against the wall
Heavy-duty magnetic door seals — replaceable seals maintain an airtight closure on both hinged doors; heavy-duty castors for repositioning
Specifications
Brand
FED-X
Model / MPN
XGNS900E
Type
Salad / Sandwich Prep Fridge
Doors
2
Door Type
Hinged
Gross Capacity
240 L
Net Capacity
180 L
GN Pan Capacity (top)
5 x 1/6th GN pans
GN Compatibility (lower)
1 x GN 1/1 shelf per door
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C, 60% RH
Cooling System
Fan-assisted
Refrigerant
R600A
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V / 170W / 1.2A
Construction
Stainless Steel (interior & exterior)
Weight Loading per Shelf
40 kg
Net Weight
106 kg
Product Dimensions (W x D x H)
903 x 700 x 1107 mm
Internal Dimensions (W x D x H)
830 x 595 x 455 mm
Packed Dimensions (W x D x H)
930 x 730 x 1260 mm
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: The XGNS900E suits restaurants, cafes, pizza shops, sandwich bars, clubs, and pubs where cold ingredient access during service is essential. Its compact 903 mm width fits tight prep lines. Browse all Salad Bar Fridges or explore the full range of FED-X commercial refrigeration.Installation & delivery: No plumbing required — plug-in 240V single phase. Unit can be placed against the wall. Pans and lids are not included; pan and pan cover must be used to ensure correct operating temperature. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XGNS900E?The lower cabinet has a net volume of 180L, with a gross volume of 240L. Each door section holds 1 x GN 1/1 compatible shelf.How many GN pans fit in the refrigerated top?The open-top refrigerated rail holds 5 x 1/6th GN pans. Pans and lids are not included with the unit and must be purchased separately.What refrigerant does the XGNS900E use?It uses R600A refrigerant, with an Embraco/Secop compressor and Dixell digital temperature controller.What is the operating temperature range?The unit operates at +2 to +8°C and is rated for a maximum ambient temperature of 38°C at 60% relative humidity.What warranty is included?The XGNS900E comes with 2 Years Parts & Labour plus 2 Years Parts Only, provided you register the product within 14 days of invoice date.
The Skipio SSR18-3 is a three solid door salad prep buffet fridge that keeps salads, dressings, garnishes and pre-prepped ingredients chilled and within easy reach during service. Its open GN-pan well sits above a 568-litre refrigerated cabinet, so front-of-line prep and bulk cold storage share one 1800mm bench.
Why operators choose the SSR18-3
568 L of refrigerated storage across three solid, self-closing doors
Chilled top well for GN pans to keep fresh ingredients at the line
0–8°C operating range with energy-efficient R-134a refrigerant
Stainless steel cabinet with polyurethane / cyclopentane CFC-free insulation
Single-phase 240V / 366W supply — plugs into a standard outlet
Specifications
Brand
Skipio
Model / MPN
SSR18-3
Type
Salad / Sandwich Prep Buffet Fridge
Doors
3 solid doors
Capacity
568 L
Temperature range
0–8°C
Refrigerant
R-134a
Insulation
Polyurethane / Cyclopentane, CFC-free
Power
366 W
Voltage
240V / 50Hz / 1Ph
External dimensions
1800(W) x 700(D) x 855(H) mm
Net weight
107 kg
Warranty
2 years parts & labour
Venue suitability: Built for cafes, sandwich bars, salad bars and buffet lines that need fast access to chilled garnishes and toppings; browse more salad bar fridges or the full Skope range to compare door counts and bench lengths.
Installation & delivery: Arrives assembled on castors, ready to plug into a standard 240V outlet. Dispatched Australia-wide.
Frequently asked questions
How many doors does the Skipio SSR18-3 have? It has three solid, self-closing doors below a chilled GN-pan prep well.
What is the refrigerated capacity? The cabinet holds 568 litres.
What temperature range does it hold? It operates between 0°C and 8°C.
What refrigerant does it use? It uses R-134a with CFC-free polyurethane / cyclopentane insulation.
What power supply does it need? 240V / 50Hz single phase, drawing 366W from a standard outlet.
The Skipio SSR15-2 Two Door Salad Prep Buffet Fridge is designed to meet the demands of busy commercial kitchens and foodservice establishments, offering ample storage capacity and convenient access to fresh ingredients. With a generous capacity of 458 liters and two spacious doors, this fridge provides plenty of space for storing pre-prepared salads, condiments, and other ingredients, making it ideal for salad bars, buffets, and food preparation stations. Its temperature range of -2 to 8 degrees Celsius ensures that ingredients are kept at optimal temperatures to preserve freshness and quality.
Constructed with durable materials and featuring high-quality insulation, including polyurethane and cyclopentane, the Skipio SSR15-2 delivers reliable cooling performance while minimizing energy consumption. The use of environmentally friendly refrigerant R-134a further enhances its eco-friendliness, making it a sustainable choice for businesses looking to reduce their carbon footprint. With its sturdy construction, spacious design, and energy-efficient operation, the Skipio SSR15-2 Two Door Salad Prep Buffet Fridge is a versatile and reliable solution for streamlining food preparation and storage in commercial kitchens.Specifications:
Classification
Refrigerator
Cabinet dimension
W1500 * D700 * H855 (mm)
Capacity
458ℓ
Inner Temperature
-2~8℃
Refrigerant
R-134a
Insulation Type
Polyurethane / Cyclopentane + CFC Free
Power
314W
Voltage
240V / 50Hz / 1Ph
Weight
91Kg
The Skipio SSR12-2 Two Door Salad Prep Buffet Fridge offers a versatile solution for commercial kitchens and foodservice establishments seeking to optimize their food preparation processes. With its spacious design and dual-door configuration, this fridge provides ample storage space and easy access to a wide range of ingredients, condiments, and pre-prepared salads. Equipped with a temperature range of -2 to 8 degrees Celsius, it ensures that your ingredients remain fresh and properly chilled, maintaining their quality and flavor for extended periods.
Constructed with durability and energy efficiency in mind, the Skipio SSR12-2 features high-quality insulation made from polyurethane and cyclopentane, along with environmentally friendly refrigerant R-134a. This combination ensures optimal cooling performance while minimizing energy consumption, helping to reduce operating costs and environmental impact. Whether used in a restaurant, catering service, or buffet setup, the Skipio SSR12-2 Two Door Salad Prep Buffet Fridge is a reliable and efficient solution for streamlining food preparation and enhancing productivity in any foodservice operation.Specifications:
Classification
Refrigerator
Cabinet dimension
W1200 * D700 * H855 (mm)
Capacity
343ℓ
Inner Temperature
-2~8℃
Refrigerant
R-134a
Insulation Type
Polyurethane / Cyclopentane + CFC Free
Power
314W
Voltage
240V / 50Hz / 1Ph
Weight
82Kg
The Skipio SHR18-3 Three Door Salad Prep Fridge with Hood Lid is a versatile and efficient refrigeration solution designed to streamline food preparation in commercial kitchens and foodservice establishments. With its spacious 702-liter capacity and three-door configuration, this fridge offers ample storage space for organizing ingredients, condiments, and prepared foods, making it ideal for busy environments where food assembly and preparation are paramount. The inclusion of a hood lid provides convenient access to the top compartment, allowing chefs and kitchen staff to quickly and easily assemble salads, sandwiches, and other dishes without the need for additional workspace.
Built with durability and energy efficiency in mind, the Skipio SHR18-3 features environmentally friendly refrigerant R-134a and high-quality insulation made from polyurethane and cyclopentane. This ensures optimal cooling performance while minimizing energy consumption, helping to reduce operating costs and environmental impact. Whether used in a restaurant, cafe, or catering facility, the Skipio SHR18-3 Salad Prep Fridge with Hood Lid is a reliable and efficient solution for enhancing productivity and efficiency in the kitchen, making it an essential asset for any foodservice operation.Specifications:
Classification
Refrigerator
Cabinet dimension
W1800 * D700 * H1028 (mm)
Capacity
702ℓ
Inner Temperature
-2~8℃
Refrigerant
R-134a
Insulation Type
Polyurethane / Cyclopentane + CFC Free
Power
366W
Voltage
240V / 50Hz / 1Ph
Weight
120Kg
The Skipio SHR12-2 Two Door Salad Prep Fridge with Hood Lid is a versatile refrigeration solution tailored for busy commercial kitchens and food preparation areas. With its spacious 432-liter capacity and two-door design, this fridge offers ample storage space for storing and organizing ingredients, condiments, and prepared foods. The inclusion of a hood lid provides convenient access to the top compartment, allowing for efficient assembly and preparation of salads, sandwiches, and other dishes, while also acting as a barrier to help maintain optimal temperature levels inside the fridge.
Designed with durability and efficiency in mind, the Skipio SHR12-2 features environmentally friendly refrigerant R-134a and high-quality insulation made from polyurethane and cyclopentane. This ensures reliable cooling performance while minimizing energy consumption, making it a sustainable and cost-effective choice for foodservice operations. Whether used in a bustling restaurant, cafe, or catering establishment, the Skipio SHR12-2 Salad Prep Fridge with Hood Lid streamlines food preparation processes, helping to enhance efficiency and productivity in the kitchen.Specifications:
Classification
Refrigerator
Cabinet dimension
W1200 * D700 * H1028 (mm)
Capacity
432ℓ
Inner Temperature
-2~8℃
Refrigerant
R-134a
Insulation Type
Polyurethane / Cyclopentane + CFC Free
Power
314W
Voltage
240V / 50Hz / 1Ph
Weight
89Kg
Thermaster Two Door Cold Bench Salad Station 6x1/1 GN Pans PG210FA-XB Key Features Fits 6x 1/1GN Capacity: 1000L Temperature: +1 to +5 Ambient: 38/50 Rh All stainless steel Streamlined for easy cleaning Auto defrost with separate control button “Blown well” Cross-flow fan cooling Cassette cooling system 220mm deep PE Chopping Board included Automatic condensation evaporation Hinge cabinet doors Come with storage shelf inside refrigerated cabinet Digital temp. controls & read-out Castors Clear sliding doors for serving area Removable stainless steel board under pans to collect food drop Fits GN pans up to 150mm deep * GN Pans not included. Pans and dividers must be fitted at all times. * Cold Tops are holding units & Product needs to be pre chilled to less than 5°C before filling top secion Warranty: 2 Years Parts and Labour + 2 Years Parts only Warranty with Product RegistrationPower: 240V; 708W/10A
The Thermaster PG150FA-XB is a 1500mm two-door cold bench salad and sandwich prep bar fridge that keeps pre-chilled ingredients at +1 to +5°C while giving kitchen staff direct access to a 4x1/1 GN pan rail at bench height. The refrigerated top section holds up to four full-size gastronorm pans (maximum 150mm deep) and the two hinged solid stainless steel doors below provide 600L of refrigerated storage — making it suited to high-volume salad assembly, sandwich prep, and cold bain marie service.
Why operators choose the PG150FA-XB
Ready at bench height — open-top GN rail puts ingredients within arm's reach, cutting prep time at peak service
Cross-flow fan cooling — "Blown well" cassette system maintains even temperature across the entire pan rail
Auto defrost & digital control — separate defrost button and digital readout mean no manual intervention and precise temperature monitoring
Self-contained condensation management — automatic condensation evaporation removes the need for manual draining
Included PE chopping board — 220mm deep board ships in the box; removable stainless steel pan-drip board keeps the cabinet hygienic
Specifications
Brand
Thermaster
Model / MPN
PG150FA-XB
Type
Cold Bench Salad & Sandwich Prep Bar Fridge
GN Pan Capacity
4 x 1/1 GN (pans up to 150mm deep)
Gross Volume
600 L
Temperature Range
+1 to +5°C
Ambient Conditions
38°C / 50% RH
Doors
2 x hinged solid stainless steel
Cooling System
Cross-flow fan (cassette)
Power Supply
240V / 645W / 10A
Power Type
Electric
Construction
Stainless Steel
Product Dimensions (W x D x H)
1460 x 790 x 845mm
Packed Dimensions (W x D x H)
840 x 1550 x 1370mm
Net Weight
102 kg
Castors
Yes (included)
Included Accessories
220mm deep PE chopping board; removable stainless steel drip board under pans
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
GN pans and dividers not included. Pans and dividers must be fitted at all times. This unit is a holding unit — product must be pre-chilled to below 5°C before loading.
Venue suitability: Ideal for cafes, delis, sandwich bars, restaurant prep kitchens, catering operations, and any commercial kitchen requiring a refrigerated ingredient station at bench height. The 1500mm bench footprint suits high-volume prep lines. Browse our full range of Salad Bar Fridges or explore all Thermaster refrigeration equipment.
Installation & delivery: Plug-in electric unit (240V/10A) — no specialist installation required. Position with adequate ventilation clearance around the compressor section. Dispatched Australia-wide.
Frequently asked questions
Does the PG150FA-XB include GN pans?No — GN pans and dividers are not included. The unit accepts standard 1/1 GN pans up to 150mm deep. Pans and dividers must be fitted at all times during operation.
What temperature does the PG150FA-XB operate at?The unit holds a refrigerated range of +1 to +5°C, suitable for maintaining pre-chilled ingredients at safe serving temperatures. Food must be pre-chilled below 5°C before loading.
How many GN pans does it hold?The prep rail holds 4 x 1/1 GN pans (full-size gastronorm), each up to 150mm deep. This makes it suited to salad bars, sandwich bars, and cold ingredient stations.
Does the defrost run automatically?Yes — the PG150FA-XB features auto defrost with a separate control button for manual initiation if needed. Condensation is managed automatically, removing the need for manual drainage.
What is included in the warranty?The Thermaster PG150FA-XB comes with 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty, effective upon product registration.
The Thermaster PG180FA-XB is a two-door cold bench salad prep bar fridge that keeps ingredients at a consistent +1 to +5°C while giving service staff direct access to chilled GN pans from above. Designed for high-volume salad, sandwich, and noodle prep operations, the 1800mm-wide unit holds five full-size 1/1 GN pans up to 150mm deep while the refrigerated cabinet below stores additional prep or backup product.Why operators choose the PG180FA-XB
5 x 1/1 GN pan configuration — generous 1800mm bench accommodates a full salad or sandwich line without compromising workflow
+1 to +5°C holding temperature — maintains food-safe cold chain throughout service, no pre-chilling guesswork
Cross-flow fan cooling with cassette system — even temperature distribution across all pans; cassette design simplifies servicing
Auto defrost with separate control button — keeps frost build-up off coils without interrupting service
Digital temperature controls and readout — instant visibility of cabinet temp, easy for staff to monitor compliance
All-stainless construction with included PE chopping board — hygienic, durable surfaces; 220mm deep chopping board ships in the box
Specifications
Brand
Thermaster
Model / MPN
PG180FA-XB
Type
Cold Bench Salad Prep Bar Fridge
GN Pan Configuration
5 x 1/1 GN (pans up to 150mm deep)
Temperature Range
+1 to +5°C
Doors
2 hinged solid doors (lower cabinet) + clear sliding doors (serving area)
Power
240V / 643W / 10A
Power Type
Electric
Material
Stainless Steel
Width
1800mm
Depth
790mm
Height
845mm
Product Dimensions
1800 x 790 x 845mm
Packed Dimensions
840(W) x 1550(D) x 1370(H)mm
Net Weight
124 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with Product Registration)
Country of Manufacture
China
Venue suitability: Ideal for cafes, delis, restaurants, and catering kitchens running high-volume cold food service. The open-top GN configuration suits salad bars, sandwich lines, sushi prep stations, and noodle assembly benches where speed of access and temperature consistency are critical. Browse our full range of Salad Bar Fridges or explore other Thermaster refrigeration equipment.Installation & delivery: Plug-and-play 240V single-phase connection. Castors included for easy repositioning. Check ceiling clearance at rear for condenser airflow. Dispatched Australia-wide.Frequently asked questionsDoes the PG180FA-XB come with GN pans?No — GN pans and dividers are not included and must be sourced separately. Pans and dividers must be fitted at all times when the unit is in operation.What is the maximum GN pan depth?The PG180FA-XB accepts GN pans up to 150mm deep in the five 1/1 GN slots.Does the unit include a chopping board?Yes — a 220mm deep PE (polyethylene) chopping board is included in the box.Can ingredients go straight from ambient into the top pan section?No — the cold top is a holding unit. All product must be pre-chilled to below 5°C before being placed in the pans to maintain food safety.What warranty does the PG180FA-XB carry?The unit carries a 2-year parts and labour warranty plus a further 2-year parts-only warranty, provided the product is registered after purchase — 4 years total coverage.
1815mm Wide 416L
Internal Dimensions: 1249 X 658 X 558
9 X 1/3 Size Pans (not Supplied)
Monoblock System With Removable Condenser Filter For Easy Cleaning
Supplied On 150mm Castors (feet Optional)
Nylon Cutting Board (increases Overall Depth To 830mm)
Sliding Polycarbonate Pan Covers
Supplied With Spacer Bars For 1/6 And 1/9 Size Pans
Removable Well, For Easy Cleaning In Places Normally Difficult To Clean
304 Grade Stainless Interior And Exterior
High Density 75mm Thick Insulation
Supplied with 2 sets of drawers instead of doors
Corrosion Resistant Coating On Evaporator Coil
Temperature Range 2°c To 5°c
Rounded Internal Corners For Easy Cleaning
43°c Ambient Temperature
R290 Gas
Manufacturer’s Code: PW20-DRAWERS
Product Dimensions: 1815(W) x 1100(H) x 760(D)mm
Introducing the Skipio Salad Side Prep Table with Hood Lid, the perfect solution for efficient and organized salad preparation in your food establishment. This innovative prep table is designed to streamline your salad preparation process, allowing you to create fresh and delicious salads with ease. With its hood lid, you can maintain the freshness and quality of your ingredients while keeping them readily accessible for quick assembly.
The Skipio Salad Side Prep Table is a versatile and essential addition to any commercial kitchen or salad bar, providing a convenient and hygienic workspace for salad preparation. Say goodbye to messy and inefficient salad prep and say hello to increased productivity and customer satisfaction with the Skipio Salad Side Prep Table with Hood Lid.Specifications:
Inner temp: 1 °~ 8°C
2 Doors
2 Shelves
Capacity: 420 Ltr
Fan cooling type
Digital temperature control
Refrigerant: R-134a
Power: 314W
Compressor: 1/4 Hp
Voltage: 240V 50Hz 1Ph (2.5 Amps)
The Airex Pizza Preparation Bench is the perfect addition to any pizza establishment. The unit fits 1/3GN pans for ingredients with an angled refrigerated service well, providing cold air above and below the pans. Under counter refrigerated storage provides extra space for overflow ingredients.
The Pizza Prep is supplied on standard and lockable castors for ease of cleaning.
Choose from 1, 2 or 3 door unit configurations.
Features:
Angled refrigerated GN 1/3 size service well with cold air blowing above and below ingredient pans. Includes under counter refrigerated storage below.
Insulated tilting stainless steel night lids - fully removable
Designed to operate at ambient temperatures up to 40°C with lid on, 32°C with lid open
Digital temperature display and control
Designed to operate between 2°C – 5°C
Full-length, back mounted, coated evaporator coil for uniformed cooling across the entire well
Fully self-contained
Supplied on standard and lockable castors for ease of cleaning
Pizza racks with dropping tray and 150mm deep 1/3 GN Pans supplied as standard
1, 2 and 3 door models available
Features:
Product Dimensions: 1740 or 2450(W) x 895(D) x 1054(H)mm
Please note, stock availability will be confirmed at the time of placing your order. Unfortunately this supplier is unable to provide us with a stock report and we are required to manually confirm stock availability for each item. We apologize for the inconvenience. Feel free to contact us prior to ordering if you prefer us to confirm availability first. Thank you for your understanding
The Airex Sandwich Prep Bench is a great addition for cafe’s, canteens and takeaway venues.
The refrigerated service well generates cold air that distributes both above and below ingredient pans. A unique full-length, coated evaporator coil provides uniformed cooling across the entire well while operating as a fully self-contained unit.
The unit is supplied with sliding Perspex lids for the blown well, digital temperature display and control, cutting board and 100mm deep 1/3GN pans.
Choose from 1, 2 or 3 door unit configurations, and addition of a sleek toughened frameless glass gantry, fixed with mid-shelf.
Features:
Refrigerated GN 1/3 size service well with cold air blowing above and below ingredient pans. Includes under counter refrigerated storage below
Sliding perspex lids for blown well
Designed to operate at ambient temperatures up to 40°C with lid on, 32°C with lid off
Digital temperature display and control
Designed to operate between 2°C – 5°C
Full-length, back mounted, coated evaporator coil for uniformed cooling across the entire well
Fully self-contained
Supplied on standard and lockable castors for ease of cleaning
Cutting board 100mm deep 1/3 GN Pans supplied as standard
1, 2 and 3 door models available
Choose from no gantry or glass gantry option
Designed and Engineered in Australia to meet Australian Standards
24 Months on-site parts and labour warranty
Features:
Product Dimensions: 2450(W) x 845(D) x 900(H)mm
Please note, stock availability will be confirmed at the time of placing your order. Unfortunately this supplier is unable to provide us with a stock report and we are required to manually confirm stock availability for each item. We apologize for the inconvenience. Feel free to contact us prior to ordering if you prefer us to confirm availability first. Thank you for your understanding
Looking for a fridge that's great during prep? Then the Polar U-Series Single Door Mega Top Preparation Counter will be the product for you.The insulation keeps the cold in so your food can be kept at the optimum temperature.With adjustable shelves chilled foods of all shapes and sizes can be stored, while still giving a quick and easy reach.The user-friendly temperature controls and display make it easily to change the temperature dependant on what's being stored, so food can remain fresher for longer.With a manual defrost option this fridge has maximum efficiency and performance to help food remain at the optimum temperature.The workable countertop maximises the space while providing a hygienic prep area, making it easy for staff to prep for pizzas, sandwiches or salads and the cutting boards can be easily removed for easy cleaning. No technician is required to set up this machine, allowing you to use it almost instantly from delivery. This item should not be used for medical storage. Please refer to our catalogue for medical fridge/freezers. Product features Capacity 154Ltr Dimensions 1100(H) x 735(W) x 760(D)mm Material Stainless Steel Finish - external Stainless Steel Refrigerant R290 / 70g Voltage 230V Warranty 2 Years Weight 102kg Solid self-closing doors ensures they won't get left open by mistake User-friendly digital temperature controls and display for easy operation Sturdy lockable castor wheels allow for easy positioning wherever you need it Removeable cutting board for easy cleaning Compressor Position: Back Door/Drawer Interchangable Prep fridge can hold 8pcs 1/6 GN pans Measurements for the prep area is 735x290x40mm Adjustable Shelves Plug Type: 1x 10amp Plug Not suitable for use in outdoor & mobile environments including catering vehicles.
Specifications
Capacity: 153L
Width: 735mm
Finish: Stainless Steel
Depth: 760mm
Looking for a way to speed up your busy lunch service? Then the Polar G-series saladette fridge will be the product for you. Thanks to the stainless-steel material this fridge is easy to clean whilst being highly durable against the general wear and tear of the catering environment - helping you to save time and money.Also, the powerful fan-assisted cooling system helps to keep the food at the optimum temperature helping to reduce the risk of cross contamination or potential food poisoning. Boasting the clear, digital controller allows your staff to change the settings to suit the items being stored, so you can produce high quality food for customers.And the strong polypropylene chopping board means your staff can quickly and easily chop ingredients without having to move to a different work station, saving time during the busy periods of service. Featuring the hardwearing compressors create a strong commercial construction making it easy to be used in the demanding professional environments. Including the versatile 1/1 gastronorm compatibility allows your chefs immediate access to their most-needed ingredients, making a fantastic option for quickly boxing or plating up meals. This item should not be used for medical storage. Please refer to our catalogue for medical fridge/freezers.Due to the size of this item, an additional delivery charge may apply - please check our delivery page for more information Product features Dimensions 857.5(H) x 438(W) x 700(D)mm Warranty 2 Years Noise Level (Decibles): 42 Gastronorm pans are sold separately Durable saladette top allows rapid access to ingredients Strong polypropylene chopping board Automatic defrost maximises efficiency and cooling performance Capacity 109Ltr Not suitable for use in outdoor & mobile environments including catering vehicles. Refrigerant R600a Temperature Range 2°C to 8°C Voltage 230V Depth of shelf/drawer (GN sizing): 530 Total Usable Capacity (Litres) of unit: 73
