Commercial cooking equipment for Australian hospitality venues — the full hot-side department in one place, covering gas ranges and ovens, fryers, griddles and chargrills, benchtop and induction units, and specialty cookers. The two biggest categories sit one click away: gas oven ranges for the centrepiece of the cooking line, and commercial deep fryers for everything crumbed, battered or chipped. If you're still working out what your kitchen actually needs, the sections below map the whole department so you can shortlist by equipment type first and compare models second.
Who this equipment is for
Every food business that cooks on site buys from this department — what varies is the mix. A café bistro might run a 600mm four-burner cooktop, a griddle and a single-pan fryer. A pub kitchen adds a chargrill and a bank of fryers to keep schnitzels and chips moving on a Friday night. Fish-and-chip shops live and die by fryer recovery times, and Asian restaurants spec dedicated wok burners with heat output no domestic stove can approach. Food trucks and market stalls lean on compact LPG and benchtop gear, while ghost kitchens in all-electric sites are increasingly going induction from day one. The common thread is commercial duty: heavier burners, thicker plate and components rated for service that runs all day, every day.
What's in scope
Ranges and ovens
The backbone of the line. Gas ranges pair open burners with a static or fan-forced oven base, while standalone ovens run from convection and pizza deck models through to combi steam ovens that steam, roast and bake from a single cabinet. High-speed ovens and commercial microwaves round out the category for quick-service reheats and snack menus.
Fryers
From single-pan benchtop units handling a café's side orders to multi-pan gas floor models built for takeaway volume. The range spans tube-style gas burners, electric element models and induction fryers, with oil capacities from a few litres up to serious production units — and recovery speed, not just capacity, is what separates them in service.
Griddles and grills
Flat-plate commercial griddles cover breakfasts, burgers and toasted sandwiches; chargrills add the sear lines and char flavour that sell steaks; and salamanders mount above the pass for melting, gratinating and finishing plates on the way out.
Benchtop and induction
Counter-height versions of nearly every category above — cooktops, fryers, griddles and grills — plus the induction and infrared cooking range, which suits venues without a gas supply, front-of-house cooking stations, and kitchens looking to cut both the heat in the room and the energy bill.
Specialty cooking
The harder-to-find gear lives here too: Asian-style wok ranges with high-output burners, pasta cookers, kebab machines, rotisseries and tandoori ovens. These are the categories where buying genuinely commercial matters most, because there's no domestic substitute that survives a real service.
How to choose commercial cooking equipment in three steps
With sixteen-odd equipment types in one department, the quickest path to a shortlist is to settle three things in order.
Step 1 — Settle the fuel type
Natural gas is the traditional pick where the site has supply — strong, visible heat that most chefs know — but every gas appliance must be installed by a licensed gasfitter. LPG covers food trucks and sites without mains gas. Electric is the simplest install for ovens, griddles and fryers, and induction delivers the fastest response with the least waste heat. Whichever way you go, confirm whether the unit runs from a standard 10-amp outlet or needs a three-phase connection before you buy.
Step 2 — Size to your peak throughput
Spec for your busiest service, not the average Tuesday. Count covers at peak, work out what share of the menu comes off each appliance, and pay attention to recovery — how quickly a fryer climbs back to temperature after a frozen basket drops, or how evenly a griddle holds heat across the full plate. Undersized gear stalls the whole line; oversized gear burns energy and bench space you'll want back.
Step 3 — Fit the footprint and the ventilation
Measure the position before you fall for a model. Floor units need clearances and service access; benchtop units need a bench rated for the weight and the heat. Most commercial cooking appliances also have to sit under a mechanical exhaust canopy, so confirm canopy coverage and your ventilation requirements with your certifier early — it's far cheaper to plan around than to retrofit.
The category covers the powered appliances a food business cooks on: ranges and cooktops, ovens (convection, combi, pizza deck, high-speed and microwave), deep fryers, griddles, chargrills, salamanders and induction units, plus specialty gear like wok ranges, pasta cookers, kebab machines and rotisseries. It differs from domestic equipment in burner output, build weight and duty cycle — commercial units are designed to hold temperature through hours of continuous service.
Should I choose gas, electric or induction?
Gas suits venues with mains supply and menus built around open-flame cooking — wok work especially. Electric is easier to install and does the job for most ovens, fryers and griddles. Induction is the most energy-efficient of the three, heats fastest and keeps the kitchen cooler, though it needs induction-compatible cookware and, on larger units, a three-phase connection. Plenty of kitchens mix all three across the line.
What's the difference between a commercial range and a cooktop?
A range combines burners with an oven in the base, so one footprint does two jobs — the classic centrepiece of a small or mid-size kitchen. A cooktop is burners only, sitting on a stand or bench, which makes sense when you'd rather pick your oven separately — a combi or convection model, say — or when you simply don't need more oven capacity.
Do you sell commercial air fryers?
Domestic-style air fryers aren't built for commercial duty cycles, so you won't find them in a serious kitchen. The same job — fast, fan-forced cooking with little or no oil — is done at venue scale by convection ovens and high-speed ovens, both of which we stock. And where the menu calls for genuinely fried texture at volume, a proper commercial deep fryer remains the right tool.
Do commercial cooking appliances need an exhaust canopy?
In most cases, yes. Australian ventilation requirements (AS 1668.2) mean cooking processes that produce heat, smoke or grease-laden vapour generally need mechanical exhaust, so plan the canopy alongside the equipment rather than after it. Gas appliances also require installation by a licensed gasfitter with a compliance certificate. Your local council or building certifier can confirm exactly what your fit-out needs.
Do you deliver cooking equipment Australia-wide?
Yes. Commercial Kitchen Store delivers nationwide, covering Sydney, Melbourne, Brisbane, Adelaide and Perth metro plus regional freight routes. Floor models ship on a pallet to a ground-floor point, so check doorway and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you spec the right unit for your kitchen and your site.
Serve up delicious fried fish, chips, and more with the reliable CKS300E Single Tank Fryer. Built for busy kitchens, it delivers great results fast—perfect for restaurants, cafés, and takeaway shops that need to keep up with demand.Made from tough stainless steel, this fryer is designed to handle daily use and still look good. When the day’s done, the built-in oil drain makes cleaning quick and hassle-free.
Product features
GasMax RC range
Oil Capacity 18 Litre
Tank Capacity 23 Litre
Dimensions 1195(H) x 395(W) x 759(D)mm
All Stainless steel Front, door, tank and trim
Model Number RC300E
Temperature Range 120°C to 200°C
Nett Weight 49.6kg
18 litre oil capacity
25kg/hr production rate
90MJ multi-jet burner system
Reliable Millivolt Mechanical controls
Easy clean, installation and service
Supplied with 2 baskets
Stainless steel lid supplied as standard
½ inch Gas Inlet
IAPMO approved #GMK10174
Robshaw valve
Built in Flue Deflector
Flame Failure protection as standard
Adjustable legs
all components easily accessible and replaceable from the front
Stainless steel basket hanger lifts off for easy cleaning
Food particles fall below burner tubes into cold zone which increases oil life
32mm ball-type full port drain valve prevents clogging
Standby pilot for easy start
2 Years Parts and Labour
Power: 90MJ/h
The GasMax JUS-TRG60E is a benchtop gas griddle that gives cafes, takeaways and busy commercial kitchens a 600mm stainless-steel cooking plate driven by two natural-gas burners.
Why operators choose the JUS-TRG60E
Twin-burner 42MJ/h output — even, sustained heat across a wide plate for breakfasts, burgers and teppanyaki through peak service.
600mm stainless-steel plate — a generous flat-top that wipes down fast and stands up to heavy daily use.
Auto ignition with flame-failure shut-off — lights at a turn of the knob and cuts the gas if the flame drops, for safer operation.
Front drip tray — catches fat and runoff to keep the bench clean.
Benchtop footprint — sits on a counter or pairs with the optional JUS600E stand.
Specifications
Brand
GasMax
Model / MPN
JUS-TRG60E
Type
Benchtop Gas Griddle
Power Type
Natural Gas
Gas Output
42MJ/h
Gas Inlet
1/2"
Burner Count
2
Material
Stainless Steel
Ignition
Auto ignition with flame-failure shut-off
Width
605mm
Depth
650mm
Height
475+60mm
Net Weight
45kg
Packed Dimensions
700(W) x 720(D) x 500(H)mm
Warranty
2 years parts & labour + 2 years parts (on registration within 14 days)
Venue suitability: Built for cafes, takeaways, food trucks and commercial kitchens that need a wide, reliable flat-top in a benchtop format without committing to a full freestanding range.
Browse the full range of Griddles or see more cooking equipment from GasMAX to match it with a stand or companion unit.
Installation & delivery: Gas equipment must be commissioned by an authorised technician before use. Dispatched Australia-wide.
Frequently asked questions
Is the GasMax JUS-TRG60E natural gas or LPG? The JUS-TRG60E runs on natural gas; an LPG version (JUS-TRG60ELPG) is available as a separate model.
How wide is the cooking plate? The griddle has a 605mm-wide stainless-steel body with a twin-burner flat plate.
What is the gas consumption? The griddle is rated at 42MJ/h consumption and uses a 1/2" gas inlet.
Does it have a safety shut-off? Yes — it features auto ignition with a flame-failure shut-off that cuts the gas if the flame is lost.
Does it come with a stand? No, it is a benchtop unit. An optional matching stand (JUS600E) is available separately.
The Gasmax JUS-TRH60E is a benchtop natural gas chargrill that delivers 600mm of charring surface across two burners, built for searing steaks, seafood and vegetables to order in busy commercial kitchens.
Why operators choose this chargrill
600mm 2-burner cooking zone — enough charring width to plate multiple proteins at once during service.
56 MJ/h gas input — fast heat-up and strong recovery so the grill bars stay hot under load.
Auto ignition with flame-failure shut-off — one-action lighting and an automatic gas cut-off if a flame goes out.
Stainless steel construction — wipes down fast and stands up to a high-volume line.
Removable drip tray — catches fat and runoff for quick end-of-shift cleaning.
Specifications
Brand
Gasmax
Model / MPN
JUS-TRH60E
Type
Chargrill
Burners
2
Gas input
56 MJ/h
Power type
Natural Gas
Gas inlet
1/2"
Ignition
Auto ignition with flame-failure shut-off
Construction
Stainless Steel
Drip tray
Yes, removable
Width
600mm
Depth
650mm
Height
475mm
Optional stand
JUS600E
Warranty
2 years parts & labour + 2 years parts only (with product registration)
Venue suitability: A compact, high-output chargrill suited to cafes, pubs, burger bars, food trucks and restaurant cooklines that need a dedicated char station without committing to a full floor-standing grill.
Browse the full Chargrills range to compare burner counts and widths, or see the rest of the GasMAX gas cooking line-up.
Installation & delivery: Gas equipment must be commissioned by an authorised technician on connection. Dispatched Australia-wide.
Frequently asked questions
What fuel does the Gasmax JUS-TRH60E use? It runs on natural gas with a 1/2" gas inlet and a total input of 56 MJ/h across its two burners.
How wide is the cooking surface? The chargrill is 600mm wide with two burners, giving enough charring width to cook several portions at once.
Does it have a safety cut-off? Yes. It uses auto ignition with flame-failure shut-off, which automatically stops the gas supply if a flame is extinguished.
Is a stand available? Yes, the optional JUS600E stand is available to raise the benchtop unit to a standing work height.
What warranty is included? It carries 2 years parts and labour plus a further 2 years parts-only warranty when the product is registered within 14 days of invoice.
ExtremePro Speed Oven with Touchscreen - NP-MWO-
Key Features
Compact design with space-saving footprint, sleek appearance, and user-friendly operation
8.6L gross capacity cooking chamber with up to 10 inches of cooking area
Combines microwave and thermal radiation for faster, more even cooking
9 pre-set cooking programs
Dual heating elements and microwave technology enable rapid cooking: Upper/lower heating elements ensure even browning, while microwave accelerates core heating, greatly reducing cooking time and enhancing efficiency.
Features a 6.8-inch touchscreen with an intuitive interface for precise control
Stores 100+ programmable recipes, each customisable with 5-stage cooking programs with independent control of heating elements and microwave power
Energy-saving mode maintains low-power standby during idle, reducing consumption and with instant recovery to cooking temperature.e
Precise temperature setting ranges from: +170 to +240 C
Equipped with a preheat function for added convenience
For the Heat Radiation function, there are five cooking setting levels: Low, Medium, High, Strong, and Off. For Microwave cooking, the setting options are On or Off
Triple-fan cooling for the magnetron and internal components boosting reliability, extending lifespan, and keeping performance steady during extended use
USB port enables recipe upload/download for centralised management
Chamber Cooking Area Size: 270x190x168
1 Year Parts & Labour Plus 1 Year Parts Only Warranty When Products Registered Within 14D Of Invoice
The Benchstar EIC350M-1 is a commercial countertop induction cooktop that delivers fast, precise single-zone heat for cafes, food trucks, demo kitchens and back-of-house prep.
Why operators choose the EIC350M-1
3.5kW induction power — heats quickly and stays energy-efficient, transferring heat straight to the pan.
Single-knob control — simple, durable rotary adjustment from 500W to 3500W.
Heat-resistant ceramic glass hob — easy to wipe down and built for continuous service.
Built-in protection — electronic overheating and dry-heat protection, plus automatic shut-off after 2 hours of untimed operation.
Plug-and-go 15A — runs from a single 240V 15A supply, no special install required.
Specifications
Brand
Benchstar
Model / MPN
EIC350M-1
Type
Induction / Infrared
Cooking zones
1
Control
Single knob, adjustable 500–3500W
Power
240V, 3.5kW, 15A
Cooktop surface
Heat-resistant ceramic glass
Pan compatibility
Ø120–260mm steel, cast iron, enamelled iron or stainless flat-bottom pans
Safety
Electronic overheating & dry-heat protection; 2-hour auto shut-off
Construction
AISI201 stainless steel outer body
Product dimensions
339(W) x 430(D) x 119(H)mm
Packed dimensions
392(W) x 498(D) x 297(H)mm
Net weight
4.3 kg
Warranty
1 year parts & labour
Venue suitability: Ideal for cafes, food trucks, catering, live cooking stations and tight prep areas where a fast, portable single induction zone is needed without a gas connection.
Browse the rest of our induction cooking range or see the full Benchstar line-up for matching benchtop equipment.
Installation & delivery: Runs from a standard 240V 15A outlet — no hard-wiring required. Dispatched Australia-wide.
Frequently asked questions
What power does the EIC350M-1 use? It runs on a single 240V supply, draws 15A and delivers up to 3.5kW, adjustable down to 500W.
How many cooking zones does it have? One induction zone, controlled by a single rotary knob.
What pans can I use on it? Induction-compatible flat-bottom pans from Ø120–260mm — steel, cast iron, enamelled iron or magnetic stainless steel.
Is it safe for continuous commercial use? Yes — it has electronic overheating and dry-heat protection and automatically shuts off after 2 hours of untimed operation.
What warranty does it come with? It is backed by a 1-year parts and labour warranty.
IWOK Commercial Induction Single Wok – IWOK-1
Key Features
Free-standing design with heavy-duty 1.5mm thick stainless steel cooking deck
Real-time power control increased energy efficiency
15kw induction wok ring for rapid heating
Higher thermal efficiency, less heat escaping from the cooking area, compared to gas
Commercial revolving water tap for easy, durable use
Easy to clean and washable, with a reusable air filter element
Enhanced safety, no flaming
500 mm induction-compatible stainless steel wok pan accessory available
Digital LED display and easy adjustment with the control knob
Auto-shutdown after 4 hours of inactivity
11-stage adjustable power settings
Overheating and overvoltage protection
Requires magnetic-based material pots for operation
Wok included
1 Year Parts and Labour Warranty
IWOK Commercial Induction Double Wok – IWOK-2
Key Features
Free-standing design with heavy-duty 1.5mm thick stainless steel cooking deck
Real-time power control increased energy efficiency
15kw induction wok ring for rapid heating
Higher thermal efficiency, less heat escaping from the cooking area, compared to gas
Commercial revolving water tap for easy, durable use
Easy to clean and washable, with a reusable air filter element
Enhanced safety, no flaming
500 mm induction-compatible stainless steel wok pan accessory available
Digital LED display and easy adjustment with the control knob
Auto-shutdown after 4 hours of inactivity
11-stage adjustable power settings
Overheating and overvoltage protection
Requires magnetic-based material pots for operation
Wok included
1 Year Parts and Labour Warranty
The Atosa EPC-1011E2 is an electric combi oven that combines convection and steam cooking in a single 10 x GN1/1 cabinet, giving high-volume kitchens the flexibility to roast, bake, steam and regenerate from one programmable unit.
Why operators choose the EPC-1011E2
10 x GN1/1 tray capacity for continuous service across a busy section
Combi cooking from 30–260°C — convection, steam and combination modes in one oven
Touchscreen control panel for stored programs and repeatable results
17/20.1 kW three-phase heating with dual 9 kW elements for fast recovery
Glass door with interior lighting for at-a-glance monitoring during service
Comes with Atosa Combi Oven Bundle products for free
Atosa Rinse Detergent 2L Bottle
Atosa Wash Detergent 2L Bottle
and Combi Oven Water Filter
Specifications
Brand
Atosa
Model / MPN
EPC-1011E2
Type
Combi Oven
Capacity
10 x GN1/1
Power
17/20.1 kW; 380/415V 3N~ (three phase)
Heating power
2 x 9 kW
Motor power
2 x 330 W
Temperature range
30–260°C
Product dimensions
786(W) x 870(D) x 1052(H)mm
Packed dimensions
870(W) x 970(D) x 1200(H)mm
Net weight
136.4 kg
Packed weight
173.4 kg
Venue suitability: A 10-tray electric combi oven suits high-throughput kitchens — hotels, function centres, hospitals, aged-care and central production kitchens — where consistent batch cooking and steam regeneration are needed across long service periods.
Browse more combi steam ovens or the wider commercial ovens range to compare capacities and configurations.
Installation & delivery: This is a three-phase appliance and must be connected by a licensed electrician. Allow clearance for door swing and ventilation. Dispatched Australia-wide.
Frequently asked questions
How many trays does the Atosa EPC-1011E2 hold? It accommodates 10 x GN1/1 gastronorm trays.
What cooking modes does it offer? It runs convection, steam and combination (combi) modes across a 30–260°C range.
What power supply does it require? It needs a 380/415V three-phase (3N~) supply and draws 17/20.1 kW.
How is the oven controlled? Via a touchscreen control panel that stores cooking programs for repeatable results.
What are the unit's dimensions? The oven measures 786(W) x 870(D) x 1052(H)mm and weighs 136.4 kg.
The Atosa EPC-0511E1 is an electric combi oven that cooks, steams and roasts five GN 1/1 trays from a single benchtop footprint, giving cafes and busy kitchens convection and steam in one compact unit.
Why operators choose the EPC-0511E1
Five GN 1/1 tray capacity with 68 mm shelf spacing for high-volume service from a compact bench unit.
Combi cooking that automatically selects optimal humidity for the set temperature and time, so steam and convection are controlled in one mode.
Touchscreen controls with picture-based, pre-programmed recipes for consistent results across shifts.
Self-cleaning and descaling cycle for quick, low-effort maintenance.
Wide 30-260°C range covering gentle steaming through to high-heat roasting and baking.
Comes with Atosa Combi Oven Bundle products for free
Atosa Rinse Detergent 2L Bottle
Atosa Wash Detergent 2L Bottle
and Combi Oven Water Filter
Specifications
Brand
Atosa
Model / MPN
EPC-0511E1
Type
Combi Oven
Capacity
5x GN 1/1
Shelf spacing
68 mm
Cooking modes
Convection + steam (combi), auto-humidity
Power
10.1 kW; 380/415V 3-phase (3N~)
Temperature range
30-260°C
Controls
Touchscreen, picture-based pre-programmed recipes
Cleaning
Self-cleaning and descaling
Construction
Stainless steel
External dimensions
786(W) x 870(D) x 712(H)mm
Packed dimensions
970(W) x 870(D) x 860(H)mm
Net weight
95 kg
Packed weight
128 kg
Warranty
2 years parts & labour
Venue suitability: Suited to cafes, restaurants, bakeries and catering operations that need both steam and convection but have limited bench space for a full floor-standing combi.
Browse the full range of combi steam ovens or compare it against other commercial ovens to match capacity to your service volume.
Installation & delivery: Requires a 380/415V three-phase electrical supply and a water connection for steam and self-clean functions; install by a licensed electrician. Dispatched Australia-wide.
Frequently asked questions
How many trays does the Atosa EPC-0511E1 hold?It holds five GN 1/1 trays, with 68 mm spacing between shelves.
What power supply does the EPC-0511E1 need?It runs on a 380/415V three-phase (3N~) supply and draws up to 10.1 kW, so it should be wired by a licensed electrician.
Is it a steam oven or a convection oven?It is a combi oven — it runs convection and steam together, automatically selecting humidity for the set temperature and time.
What temperature range does it cover?The cooking range is 30-260°C, covering gentle steaming through to high-heat roasting and baking.
What warranty does the EPC-0511E1 come with?It is covered by a 2-year parts and labour warranty.
The Atosa EPC-0711E2 is a commercial electric combi oven that combines convection and steam cooking in a single 786mm-wide benchtop unit, holding 7 x GN 1/1 trays in a 100 L chamber for kitchens that need to roast, bake, steam and regenerate from one appliance.
Why operators choose the EPC-0711E2
Three cooking modes — convection, steam and combination — across a 30–260°C range for everything from gentle proving to high-heat roasting.
7 x GN 1/1 capacity in a 100 L chamber with 68mm tray pitch, suiting high-throughput service in a compact footprint.
Touchscreen control with manual cooking, cookbook programs, fast cool-down, shelf timing and automatic self-clean.
Three-phase 13.1–15.5 kW power for fast recovery and consistent, even results across all racks.
Glass door and stainless construction built for the demands of a commercial kitchen.
Comes with Atosa Combi Oven Bundle products for free
Atosa Rinse Detergent 2L Bottle
Atosa Wash Detergent 2L Bottle
and Combi Oven Water Filter
Specifications
Brand
Atosa
Model / MPN
EPC-0711E2
Type
Electric Combi Oven (convection + steam)
Capacity
7 x GN 1/1
Chamber Volume
100 L
Tray Pitch
68 mm
Cooking Modes
Convection, Steam, Combination
Temperature Range
30–260°C
Power
13.1 kW @ 380V / 15.5 kW @ 415V
Electrical Supply
380–415V, 3-phase + N + PE, 50–60 Hz
Max Current
26 A per phase
Minimum Cable
5G4 mm² (H07RN-F)
Protection Class
IPX4
Water Connection
¾" supply hose, 2–3 bar, hardness <8°dH
Drain / Exhaust
32 mm drain / 60 mm exhaust
Max Load
18 kg per rack, 126 kg total
Product Dimensions
786(W) x 870(D) x 888(H) mm
Packed Dimensions
970(W) x 870(D) x 1030(H) mm
Net Weight
120.8 kg
Gross Weight
154.4 kg
Venue suitability: A 7-tray combi oven suits restaurants, cafes, caterers, bakeries, function venues and aged-care or hospitality kitchens that need one unit to roast, bake, steam and regenerate through service.
It sits naturally alongside the rest of our combi steam ovens range, and you can compare it against the wider commercial ovens line-up to match the right capacity to your kitchen.
Installation & delivery: Requires a 380–415V three-phase electrical supply and a plumbed ¾" water connection, so installation must be completed by a licensed electrician and plumber. Dispatched Australia-wide.
Frequently asked questions
How many trays does the EPC-0711E2 hold? It holds 7 x GN 1/1 trays in a 100 L cooking chamber with a 68mm tray pitch.
What cooking modes does it offer? It runs convection, steam and combination modes across a 30–260°C temperature range, so you can roast, bake, steam and regenerate in one unit.
What electrical supply does it need? A 380–415V three-phase supply (3-phase + N + PE), drawing up to 26 A per phase with a minimum 5G4 mm² cable; nominal power is 13.1 kW at 380V rising to 15.5 kW at 415V.
Does it need a water connection? Yes — a plumbed ¾" water supply at 2–3 bar with water hardness below 8°dH, plus a 32mm drain.
What are the dimensions and weight? The unit measures 786(W) x 870(D) x 888(H) mm and weighs 120.8 kg net (154.4 kg gross, packed).
The Atosa EPC-0621E2 is an electric combi oven that combines convection and steam in one cabinet, taking six GN 2/1 (or 600 x 400 mm) trays so a single unit can roast, bake, steam and regenerate through a busy service.
Why operators choose the EPC-0621E2
Six GN 2/1 (600 x 400 mm) tray capacity on grab-and-go racks for high-volume batch cooking
Touchscreen control with picture-based pre-programmed recipes for consistent, repeatable results
Automatic humidity selection based on temperature and time for no-fuss combi cooking
Self-cleaning and descaling cycles for quick, low-effort maintenance
Wide 30-260°C operating range covering steaming, baking and roasting
Comes with Atosa Combi Oven Bundle products for free
Atosa Rinse Detergent 2L Bottle
Atosa Wash Detergent 2L Bottle
and Combi Oven Water Filter
Specifications
Brand
Atosa
Model / MPN
EPC-0621E2
Type
Combi Oven
Capacity
6 x GN 2/1 (or 600 x 400 mm) trays
Shelf spacing
82 mm
Power
20.1 kW; 380/415V 3N~ (three phase)
Heating power
2 x 9 kW
Temperature range
30-260°C
Cooking modes
Combi (convection + steam) with automatic humidity
Product dimensions
908(W) x 1080(D) x 922(H) mm
Packed dimensions
985(W) x 1160(D) x 1065(H) mm
Net weight
160.4 kg
Packed weight
207.7 kg
Venue suitability: Suited to high-output kitchens, catering operations, bakeries and function venues that need batch convection and steam cooking from a single benchtop or stand-mounted unit.
Browse the full range of combi steam ovens or compare against the wider selection of commercial ovens to find the right capacity for your kitchen.
Installation & delivery: Requires a 380/415V three-phase electrical supply — arrange a qualified electrician for connection. Dispatched Australia-wide.
Frequently asked questions
How many trays does the EPC-0621E2 hold? It holds six GN 2/1 trays, equivalent to 600 x 400 mm trays.
Is it a combi oven or a convection oven? It is a combi oven that runs both convection and steam, and automatically selects humidity based on temperature and time.
What power supply does it need? It draws 20.1 kW on a 380/415V three-phase (3N~) connection, so it needs a hard-wired three-phase supply.
What temperatures can it reach? The operating range is 30 to 260°C, covering low-temperature steaming through to high-heat roasting.
Does it self-clean? Yes — it has built-in self-cleaning and descaling cycles to simplify maintenance.
Standard Features
10” Smart Touch Flat Screen – Large colorful and vibrant icons
Combi Smart Cooking – Automated monitoring to maintain cooking temperature and humidity
Combi Smart Touch – Programmable multi-stage cooking and menu options
8 Fan Speed with balance reverse
Humidity Control – Automatically maximizes steam saturation and humidity control
Sub-divided Heating System for maximum recovery
Smart Touch Rack Timing for batch cooking and a la carte service
USB Storage – Save and share recipes and unit data with multiple units and locations
6 Mode Automated Combi Wash – Automatic cleaning based on soil and usage
ATOSA Chemicals – Approved for use with ATOSA’s proprietary liquid Combi cleaner and rinse agents
Twin Chemical Fill Tanks – Combi automatically reminds user to add cleaner / rinse to tanks when low
Sleek Design – Triple-pane tempered glass doors, condensed footprint, convenient for cleaning and maintenance
Footless Combi Design – Ergonomic footing for stability and placement
High-Pressure Coil Wash Hose – Ideal for manual quick flush, rinsing and cabinet quick cleaning
The B+S BT-GRP6-CBR6 is a gas grill plate and char broiler combination that pairs a 600mm smooth grill plate with a 600mm char broiler on a single stand, giving a busy kitchen two distinct cooking surfaces in one 1200mm footprint.
Why operators choose the BT-GRP6-CBR6
600mm heavy-duty 16mm mild-steel grill plate with a top-welded, smooth finish for steaks, eggs and breakfast service
600mm char broiler with reversible cast-iron J-Grates and radiant hoods for flat or inclined char-grilling
22MJ aluminised tube burner per 300mm on the grill side and a 34MJ stainless U-Burner per 300mm on the char side
Flame failure device and piezo pilot ignition fitted as standard, with a multi-setting gas valve for fine flame control
AISI-grade stainless steel frame with a full undershelf and easy-clean fat spillage trays
Specifications
Brand
B+S
Model / MPN
BT-GRP6-CBR6
Type
Grill plate & char broiler combination
Series
B+S Black Series
Grill plate
600mm smooth, 16mm-thick mild steel, top welded
Char broiler
600mm, cast-iron reversible J-Grates with radiant hoods
Gas type
Natural Gas
Gas consumption
112 MJ/h (NG)
Grill burner
22MJ aluminised tube burner per 300mm section
Char broiler burner
34MJ stainless steel U-Burner per 300mm section
Ignition
Piezo pilot ignition with flame failure device
Gas connection
3/4" (M) BSP, regulator included
Construction
AISI-grade stainless steel frame with undershelf
Overall dimensions
1200(W) x 840(D) x 1030(H)mm
Approval number
GMK 10686
Warranty
24 months
Venue suitability: A grill-and-char combination suits high-throughput kitchens — pubs, steakhouses, burger bars and hotels — that need both a flat plate and a char surface on one line. Browse more options in our griddles range or compare dedicated chargrills to plan your cookline.
Installation & delivery: Gas equipment must be installed by a licensed gasfitter in accordance with AS/NZS 5601; the gas regulator is included. Dispatched Australia-wide.
Frequently asked questions
Is the BT-GRP6-CBR6 natural gas or LPG? This configuration is supplied for natural gas, with a total gas input of 112 MJ/h. B+S also builds the same unit for LPG (104 MJ/h).
What are the two cooking surfaces? A 600mm smooth 16mm mild-steel grill plate on the left and a 600mm cast-iron char broiler on the right, each with its own burners and controls.
What are the overall dimensions? 1200mm wide x 840mm deep x 1030mm high, including the stand with undershelf.
Does it come with a gas regulator? Yes, the gas regulator is included with the unit; installation must follow AS/NZS 5601.
What warranty does it carry? The B+S Black Series carries a 24-month warranty.
For high production gas economy frying, specify Pitco Solstice gas tube fryers with the patented Solstice Burner Technology. These dependable millivolt fryers feature a blower-free atmospheric heating system that provides fast recovery to cook a variety of food products. The Solstice gas fryer comes standard with a millivolt thermostat with a thermo-safety pilot and high temperature safety limit switch. The unique Solstice burner and baffle design increases cooking production, lowers flue temperature, and improves the working environment compared to previous models.
STANDARD FRYER FEATURES & ACCESSORIES• Tank - stainless steel construction• Cabinet - stainless front, door and sides• Solstice Burner Technology, No blower or ceramics• Millivolt Thermostat (T-Stat) 95°C-200°C CE• Thermo-Safety pilot with built in regulator• High Temperature safety limit switch• Heavy duty 3/16” bottom door hinge• 1 ¼” (32 mm) Full port drain valve for fast draining• Separate Manual gas shutoffs, for front servicing• Integrated flue deflector• 9” (229 mm) swivel castors with front brakes• Tube rack, allows crumbs & debris into cool zone• Removable basket hanger, requires no tools• Drain Line Clean out rod and brush• Drain Extension• Lids• Fryer cleaner sample packet• 2 Baskets per tank
FRYER FILTER SYSTEM• Simple two-step filtration• Fast filtering with a 30L per minute pumpfor quick oil refills• Easy, hassle-free hookup witha self-aligning filter connection• Rear oil return helps clean the fryer bottom• Durable stainless steel filter pan with rear wheelsfor easy movement• Convenient self-storing lid stays out of the way• Comes standard with washdown/discharge hose
Dimensions (WxDxH): 794 x 875 x 1172 mm
Benchstar Electric Griddle GH-820
Key Features
Net Polished mild steel plate, 10mm thickness
Constructed of stainless steel
Adjustable thermostat that ranges from 50-300°C
Each unit has a removable stainless steel oil in the front
Splash guard around the griddle plate
Blue power indicator and yellow heating indicator
Hi limit thermostat for double safety of electrical components with reset poles
Deep drawn oil drainage hole
Anti slippery rubber foot
Durable heating elements
1 Year Parts and Labour + 1 Year Parts Only Warranty for Products Registered within 14 Days of Invoice
Made of stainless steel.
Smooth hot-plate. Surface area: 24 dm2
Burner in stainless steel with pilot
Piezoelectric burner ignition
Thermostat control of the hot-plate temperature 120 Cº -310 Cº
Fat collector under the grill
2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of Invoice
Fagor Kore 900 Series LPG Deep Fat Fryer - F-G9215LPG
2 x 15L Tanks
2 Large Baskets (260 x 330 x 100 mm)
Surface tops manufactured in 2mm thick 304 stainless steel
Laser-cut joints, automatic welding and polishes. Screws are hidden from view.
Wells stamped into the surface top
Cold zone in the lower part of the well, which helps to maintain the quality and characteristics of the oil for longer use.
Thermostatic temperature control between 60 and 200°C
Gas models with 3 longitudinal heating tubes integrated into the well
High-efficiency gas burners
High-power machines which heat up very fast with a high power:liter ratio (up to 1.00kW/litre in gas models).
Ignition by spark train for gas models
Safety thermostat
Unloading of oil from the well by means of robust and reliable ball valve, resistant to high temperatures.
With individual lids for each well
High temperature enameled cast iron flue protector
Access the components from the front
Machines with IPX5 grade water protection
OPTIONAL ACCESSORIES
21 litre fryers: large basket (260 x 330 x 100 mm)
15 litre fryers: small basket (125 x 280 x 100 mm)
The CookRite CTCO-25 is a countertop convection oven that brings even, fan-forced baking and reheating to cafes, kiosks and compact commercial kitchens where bench space is tight. It holds 3 x GN 1/4 trays in a stainless-steel benchtop body measuring just 475 x 504 x 381mm.
Why operators choose the CTCO-25
Compact 475 x 504 x 381mm footprint fits on a standard bench or back-of-house shelf.
Holds 3 x GN 1/4 trays for muffins, pastries, par-bakes and reheating.
Fan-forced convection for faster, more even cooking than a static oven.
Stainless-steel construction with a glass viewing door for easy monitoring.
Light 19kg net weight makes it easy to position or relocate.
Specifications
Brand
CookRite
Model / MPN
CTCO-25
Type
Countertop Convection Oven
Capacity
3 x GN 1/4 trays
External Dimensions
475(W) x 504(D) x 381(H)mm
Net Weight
19kg
Packed Dimensions
545(W) x 565(D) x 445(H)mm
Packed Weight
21.5kg
Construction
Stainless Steel
Venue suitability: A natural fit for cafes, sandwich bars, convenience stores, kiosks and small commercial kitchens that need reliable convection baking without a full-size oven. It pairs well with other compact units in our convection ovens range, and you can browse the full CookRite lineup for matching benchtop equipment.
Installation & delivery: The CTCO-25 is a plug-in countertop unit that sits on any sturdy, level bench. Dispatched Australia-wide.
Frequently asked questions
What tray size does the CTCO-25 take? It holds 3 x GN 1/4 trays.
How big is the CookRite CTCO-25? The external dimensions are 475(W) x 504(D) x 381(H)mm, making it a compact benchtop unit.
How heavy is it? The oven weighs 19kg net (21.5kg packed), so it is light enough to reposition as needed.
Is it a fan-forced (convection) oven? Yes — it uses fan-forced convection for faster, more even cooking than a static oven.
What is it made of? The body is stainless steel with a glass viewing door.
The CookRite CTCO-50 is a countertop convection oven that brings fan-forced, even-bake performance to benches where floor space is tight. It holds four GN 1/2 trays in a single compact deck, making it a practical second oven for cafes, bakeries, sandwich bars and front-of-house finishing stations.
Why operators choose the CTCO-50
Holds 4 x GN 1/2 trays in a single benchtop deck for steady batch output
Fan-forced convection circulates heat for even browning across every shelf
Compact 580mm-wide footprint fits on a standard prep bench or stand
Tempered glass door lets staff monitor bakes without opening and dropping heat
Simple manual dial controls — fast to learn across a rotating team
Specifications
Brand
CookRite
Model / MPN
CTCO-50
Type
Countertop Convection Oven
Tray Capacity
4 x GN 1/2
Heating
Electric, fan-forced convection
Door
Glass
Controls
Manual dial
External Dimensions
580 x 570 x 417 mm (W x D x H)
Packaged Dimensions
650 x 635 x 480 mm (W x D x H)
Net Weight
25 kg
Packaged Weight
28 kg
Venue suitability: Ideal for cafes, bakeries, patisseries, sandwich and takeaway bars, and as a back-up or finishing oven in busy commercial kitchens where bench space rules out a full-size oven.
Browse the rest of our countertop convection ovens or see the full CookRite range to compare sizes and configurations.
Installation & delivery: A plug-in benchtop unit — set it on a stable, heat-rated surface with clearance for ventilation. Dispatched Australia-wide.
Frequently asked questions
How many trays does the CookRite CTCO-50 hold? It takes four GN 1/2 trays in a single benchtop deck.
How big is the CTCO-50? The oven measures 580mm wide, 570mm deep and 417mm high, so it sits on a standard prep bench.
Is it a fan-forced oven? Yes — it is a convection oven, so an internal fan circulates hot air for more even baking than a static oven.
What type of door does it have? A tempered glass door, letting staff watch the bake without opening it and losing heat.
How heavy is the unit? It weighs 25kg net, and around 28kg packaged for delivery.
The Anvil ICK2400 is a 2.4 kW benchtop induction cooker that delivers fast, controllable heat for front-of-house and back-of-house cooking, with 10 power levels from 500 W to 2400 W and a 250 mm cooking zone.Why operators choose the ICK2400
10 power levels spanning 500 W to 2400 W for everything from gentle holding to rapid boils
Instant induction heat saves power during quiet periods
Wide 60°C–240°C temperature range with electronic overheat protection
LED-display timer adjustable from 0 to 180 minutes
Sealed controls for easy wipe-down in busy commercial kitchens
Specifications
Brand
Anvil
Model / MPN
ICK2400
Type
Induction Cooker
Power
2.4 kW; 240 V; 10 A
Power levels
10 (500–2400 W)
Cooking zone
250 mm
Temperature range
60°C – 240°C
Timer
0–180 minutes, LED display
Cookware
Suits any magnetic-based cooking pots
Maximum pot load
30 kg
Product dimensions
340 x 432 x 117 mm
Net weight
7.5 kg
Country of manufacture
China
Warranty
12 months back-to-base
Venue suitability: Cafes, restaurants, catering operations, buffet lines and demonstration kitchens that need fast, precise benchtop heat without open flames.Browse the full Anvil range or compare other induction cooking equipment.Installation & delivery: Plugs into a standard 240 V supply (10 A rated) — no gas connection required; allow bench space and use induction-compatible (magnetic-based) cookware. Dispatched Australia-wide.Frequently asked questionsWhat cookware works with the Anvil ICK2400?It suits any magnetic-based cooking pots. If a magnet sticks to the base of your pan, it will work on the ICK2400's 250 mm cooking zone.How many power levels does the ICK2400 have?Ten power levels from 500 W up to 2400 W, plus a temperature range of 60°C to 240°C for precise control.Does the ICK2400 have a timer?Yes — a built-in timer with LED display, adjustable from 0 to 180 minutes.What is the maximum weight the ICK2400 can hold?The cooking surface is rated for a maximum load of 30 kg.What warranty does the Anvil ICK2400 come with?It is covered by a 12-month back-to-base warranty.
The Moretti Forni F50E is a 5-tray electric convection oven for bakeries, pastry kitchens and gastronomy. It takes 60 x 40cm trays on a 97mm pitch and combines alternating air rotation with a motorised, programmable steam valve for even, repeatable baking.Why operators choose the F50E
5 x 60 x 40cm trays in a compact 850 x 1065mm footprint, only 698mm high
Alternating air rotation for even heat across every tray
100 customisable programs, each with up to 9 baking phases
Motorised programmable vapour valve with adjustable vaporisation
Power-Booster technology for workload peaks, Eco-Standby between services
Stacks with a second F50E, or sits on a Serie F stand or humidified prover
Standard features
Stainless steel construction with high-density insulation
Internal construction in stainless steel
Colour multilanguage LCD display
Maximum temperature 270°C
100 programs and timer
Easy-to-clean double tempered glass door
Electronic vapour ducting valve
Steam injection by timer controller, program or manual
Specifications
Model
F50E
Tray capacity
5 x 60 x 40cm
Tray pitch
97mm
Internal width
610mm
Internal depth
417mm
External dimensions
850(W) x 1065(D) x 698(H)mm
Net weight
105kg
Packed dimensions
920(W) x 1055(D) x 850(H)mm
Shipping weight
120kg
Power supply
415V, 3N
Maximum power
9.3kW
Current
13A
Maximum temperature
270°C
Warranty
12 months
Cable and plug are not supplied — the F50E requires hard-wiring by a licensed electrician.Stands, provers and accessoriesThe F50E sits on a Serie F stand or humidified prover, sold separately. Browse the full Moretti Forni range, or see more bakery equipment and commercial ovens.Warranty and deliverySupplied with a 12-month warranty. See Warranty Information & Service Requests for terms and how to lodge a service request.Frequently asked questionsHow many trays does the F50E hold?Five 60 x 40cm trays on a 97mm pitch.Can two F50E ovens be stacked?Yes. Two F50E ovens can be stacked using the F50-100K stacking arrangement, giving a combined height of 1398mm and a combined weight of 210kg.Does the F50E come with a plug?No. Neither cable nor plug is supplied. The oven runs on 415V three-phase and must be hard-wired by a licensed electrician.What is the difference between the F50E and the F100E?The F50E holds 5 trays at a 97mm pitch and draws 9.3kW; the F100E holds 10 trays at an 89mm pitch and draws 18.5kW. Both share the same 850 x 1065mm footprint.
The Moretti Forni F100E is a 10-tray electric convection oven built for bakeries, pastry kitchens and gastronomy. It takes 60 x 40cm trays on an 89mm pitch and pairs alternating air rotation with a motorised, programmable steam valve, so a full load bakes evenly from the top tray to the bottom.Why operators choose the F100E
10 x 60 x 40cm trays within an 850mm-wide footprint
Alternating air rotation for even heat across every tray
100 customisable programs, each with up to 9 baking phases
Motorised programmable vapour valve with adjustable vaporisation
Power-Booster technology for workload peaks, Eco-Standby between services
Double tempered glass door that opens fully for cleaning
Standard features
Stainless steel construction with high-density insulation
Internal construction in stainless steel
Colour multilanguage LCD display
Maximum temperature 270°C
100 programs and timer
Easy-to-clean double tempered glass door
Electronic vapour ducting valve
Steam injection by timer controller, program or manual
Specifications
Model
F100E
Tray capacity
10 x 60 x 40cm
Tray pitch
89mm
Internal width
610mm
Internal depth
417mm
External dimensions
850(W) x 1065(D) x 1108(H)mm
Net weight
145kg
Packed dimensions
920(W) x 1055(D) x 1260(H)mm
Shipping weight
165kg
Power supply
415V, 3N
Maximum power
18.5kW
Current
25.8A
Average consumption
6.1kWh
Maximum temperature
270°C
Warranty
12 months
Cable and plug are not supplied — the F100E requires hard-wiring by a licensed electrician.Stands, provers and accessoriesThe F100E sits on a Serie F stand or humidified prover, sold separately. Browse the full Moretti Forni range, or see more bakery equipment and commercial ovens.Warranty and deliverySupplied with a 12-month warranty. See Warranty Information & Service Requests for terms and how to lodge a service request.Frequently asked questionsHow many trays does the F100E hold?Ten 60 x 40cm trays on an 89mm pitch.Does the F100E come with a plug?No. Neither cable nor plug is supplied. The oven runs on 415V three-phase and must be hard-wired by a licensed electrician.Does it inject steam?Yes. Steam injection can be triggered by the timer controller, by program, or manually, with an electronic vapour ducting valve.What is the difference between the F50E and the F100E?The F50E holds 5 trays at a 97mm pitch and draws 9.3kW; the F100E holds 10 trays at an 89mm pitch and draws 18.5kW. Both share the same 850 x 1065mm footprint.
The Moretti Forni COMP S125E/3A/L is a triple-deck bakery oven on an integrated prover, from the modular serieS range. The A designation marks it as the bakery configuration: 220mm baking chambers rather than the 160mm pizza chambers, a 270°C working range and a choice of baking surface — built for bread, rolls and pastry rather than pizza.Bakery configuration, not pizzaIf you are comparing this against the serieS pizza ovens, the difference is real. The taller 220mm chamber takes tins, trays and high-rising loaves that will not fit a 160mm pizza deck, and the lower 270°C ceiling is matched to bread and pastry rather than the 450°C a Neapolitan pizza deck runs at. Choose this range for a bakery; choose the pizza-configured serieS for a pizzeria.Why operators choose it
Three independent 1245 x 1265 x 220mm baking chambers
Integrated prover beneath — dough proves and bakes in one footprint
Choice of embossed steel or micro-rugged refractory baking floor
Fume capturing hood included
Colour multilanguage LCD display, 100 baking programs and double timer
Standby, boost and half-load functions for part-loaded services
Standard features
Complete with fume capturing hood, triple deck chamber and prover
Choice of embossed steel or micro-rugged refractory baking floor
Stainless steel construction with high-density insulation
Colour multilanguage LCD display
Reinforced double internal lighting
Maximum temperature 270°C
100 baking programs and double timer
Standby, boost and half-load functions
Turn-on timer and cleaning mode
Specifications
Model
COMP S125E/3A/L
Configuration
Triple deck, bakery, on prover
Baking chamber (each)
1245(W) x 1265(D) x 220(H)mm
External dimensions
1660(W) x 1973(D) x 2255(H)mm
Net weight
1071kg
Shipping weight
1141kg (includes wooden crate)
Power supply
415V, 3N
Maximum power
3 x 17.3kW
Current
3 x 25A
Maximum temperature
270°C
Warranty
12 months
Cable and plug are not supplied — this oven requires hard-wiring by a licensed electrician.Range and alternativesAlso available on a stand as the COMP S125E/3A/S where a prover is not needed. Browse the full Moretti Forni range, more bakery equipment and other commercial ovens.Warranty and deliverySupplied with a 12-month warranty. See Warranty Information & Service Requests.Frequently asked questionsHow is this different from the pizza serieS ovens?The /A bakery configuration has 220mm chambers instead of 160mm and runs to 270°C instead of 450°C. It is built for bread and pastry; the pizza configuration is built for high-temperature pizza baking.What does the /L suffix mean?/L is the on-prover version. /S is the same oven on a stand.Can I choose the baking floor?Yes. The serieS bakery configuration offers a choice of embossed steel or micro-rugged refractory baking floor. Confirm your preference when ordering.Does it come with a plug?No. It runs on 415V three-phase and must be hard-wired by a licensed electrician.
The Moretti Forni COMP S140E/3A/S is a triple-deck bakery oven on a stand, with the widest decks in the serieS range at 1400 x 935mm. The A designation marks the bakery configuration: 220mm baking chambers, a 270°C working range and a choice of baking surface.The wide-deck optionAt 1400mm wide and 935mm deep, these decks suit long tins and full-width trays loaded across the mouth rather than front-to-back. If your bakery runs standard tray sizes across a wide front, this is the layout that fits — and it draws 16kW rather than the 3 x 17.3kW of the deeper S125E.Why operators choose it
Three independent 1400 x 935 x 220mm baking chambers
Widest deck in the serieS range
Choice of embossed steel or micro-rugged refractory baking floor
Fume capturing hood included
Colour multilanguage LCD display, 100 baking programs and double timer
Standby, boost and half-load functions
Standard features
Complete with fume capturing hood, triple deck chamber and stand
Choice of embossed steel or micro-rugged refractory baking floor
Stainless steel construction with high-density insulation
Colour multilanguage LCD display
Reinforced double internal lighting
Maximum temperature 270°C
100 baking programs and double timer
Standby, boost and half-load functions
Turn-on timer and cleaning mode
Specifications
Model
COMP S140E/3A/S
Configuration
Triple deck, bakery, on stand
Baking chamber (each)
1400(W) x 935(D) x 220(H)mm
External dimensions
1815(W) x 1638(D) x 2255(H)mm
Net weight
916kg
Shipping weight
986kg (includes wooden crate)
Power supply
415V, 3N
Maximum power
16kW
Current
2 x 22.3A
Maximum temperature
270°C
Warranty
12 months
Cable and plug are not supplied — this oven requires hard-wiring by a licensed electrician.Range and alternativesFor deeper rather than wider decks see the COMP S125E/3A/S at 1245 x 1265mm. Browse the full Moretti Forni range, more bakery equipment and other commercial ovens.Warranty and deliverySupplied with a 12-month warranty. See Warranty Information & Service Requests.Frequently asked questionsHow does the S140E differ from the S125E?The S140E has wider but shallower decks (1400 x 935mm vs 1245 x 1265mm) and draws 16kW rather than 3 x 17.3kW. Choose on how your trays load — across the width, or front to back.How is this different from the pizza serieS ovens?The /A bakery configuration has 220mm chambers instead of 160mm and runs to 270°C instead of 450°C.Can I choose the baking floor?Yes — embossed steel or micro-rugged refractory.Does it come with a plug?No. It runs on 415V three-phase and must be hard-wired by a licensed electrician.