Commercial cooking equipment for Australian hospitality venues — the full hot-side department in one place, covering gas ranges and ovens, fryers, griddles and chargrills, benchtop and induction units, and specialty cookers. The two biggest categories sit one click away: gas oven ranges for the centrepiece of the cooking line, and commercial deep fryers for everything crumbed, battered or chipped. If you're still working out what your kitchen actually needs, the sections below map the whole department so you can shortlist by equipment type first and compare models second.
Who this equipment is for
Every food business that cooks on site buys from this department — what varies is the mix. A café bistro might run a 600mm four-burner cooktop, a griddle and a single-pan fryer. A pub kitchen adds a chargrill and a bank of fryers to keep schnitzels and chips moving on a Friday night. Fish-and-chip shops live and die by fryer recovery times, and Asian restaurants spec dedicated wok burners with heat output no domestic stove can approach. Food trucks and market stalls lean on compact LPG and benchtop gear, while ghost kitchens in all-electric sites are increasingly going induction from day one. The common thread is commercial duty: heavier burners, thicker plate and components rated for service that runs all day, every day.
What's in scope
Ranges and ovens
The backbone of the line. Gas ranges pair open burners with a static or fan-forced oven base, while standalone ovens run from convection and pizza deck models through to combi steam ovens that steam, roast and bake from a single cabinet. High-speed ovens and commercial microwaves round out the category for quick-service reheats and snack menus.
Fryers
From single-pan benchtop units handling a café's side orders to multi-pan gas floor models built for takeaway volume. The range spans tube-style gas burners, electric element models and induction fryers, with oil capacities from a few litres up to serious production units — and recovery speed, not just capacity, is what separates them in service.
Griddles and grills
Flat-plate commercial griddles cover breakfasts, burgers and toasted sandwiches; chargrills add the sear lines and char flavour that sell steaks; and salamanders mount above the pass for melting, gratinating and finishing plates on the way out.
Benchtop and induction
Counter-height versions of nearly every category above — cooktops, fryers, griddles and grills — plus the induction and infrared cooking range, which suits venues without a gas supply, front-of-house cooking stations, and kitchens looking to cut both the heat in the room and the energy bill.
Specialty cooking
The harder-to-find gear lives here too: Asian-style wok ranges with high-output burners, pasta cookers, kebab machines, rotisseries and tandoori ovens. These are the categories where buying genuinely commercial matters most, because there's no domestic substitute that survives a real service.
How to choose commercial cooking equipment in three steps
With sixteen-odd equipment types in one department, the quickest path to a shortlist is to settle three things in order.
Step 1 — Settle the fuel type
Natural gas is the traditional pick where the site has supply — strong, visible heat that most chefs know — but every gas appliance must be installed by a licensed gasfitter. LPG covers food trucks and sites without mains gas. Electric is the simplest install for ovens, griddles and fryers, and induction delivers the fastest response with the least waste heat. Whichever way you go, confirm whether the unit runs from a standard 10-amp outlet or needs a three-phase connection before you buy.
Step 2 — Size to your peak throughput
Spec for your busiest service, not the average Tuesday. Count covers at peak, work out what share of the menu comes off each appliance, and pay attention to recovery — how quickly a fryer climbs back to temperature after a frozen basket drops, or how evenly a griddle holds heat across the full plate. Undersized gear stalls the whole line; oversized gear burns energy and bench space you'll want back.
Step 3 — Fit the footprint and the ventilation
Measure the position before you fall for a model. Floor units need clearances and service access; benchtop units need a bench rated for the weight and the heat. Most commercial cooking appliances also have to sit under a mechanical exhaust canopy, so confirm canopy coverage and your ventilation requirements with your certifier early — it's far cheaper to plan around than to retrofit.
The category covers the powered appliances a food business cooks on: ranges and cooktops, ovens (convection, combi, pizza deck, high-speed and microwave), deep fryers, griddles, chargrills, salamanders and induction units, plus specialty gear like wok ranges, pasta cookers, kebab machines and rotisseries. It differs from domestic equipment in burner output, build weight and duty cycle — commercial units are designed to hold temperature through hours of continuous service.
Should I choose gas, electric or induction?
Gas suits venues with mains supply and menus built around open-flame cooking — wok work especially. Electric is easier to install and does the job for most ovens, fryers and griddles. Induction is the most energy-efficient of the three, heats fastest and keeps the kitchen cooler, though it needs induction-compatible cookware and, on larger units, a three-phase connection. Plenty of kitchens mix all three across the line.
What's the difference between a commercial range and a cooktop?
A range combines burners with an oven in the base, so one footprint does two jobs — the classic centrepiece of a small or mid-size kitchen. A cooktop is burners only, sitting on a stand or bench, which makes sense when you'd rather pick your oven separately — a combi or convection model, say — or when you simply don't need more oven capacity.
Do you sell commercial air fryers?
Domestic-style air fryers aren't built for commercial duty cycles, so you won't find them in a serious kitchen. The same job — fast, fan-forced cooking with little or no oil — is done at venue scale by convection ovens and high-speed ovens, both of which we stock. And where the menu calls for genuinely fried texture at volume, a proper commercial deep fryer remains the right tool.
Do commercial cooking appliances need an exhaust canopy?
In most cases, yes. Australian ventilation requirements (AS 1668.2) mean cooking processes that produce heat, smoke or grease-laden vapour generally need mechanical exhaust, so plan the canopy alongside the equipment rather than after it. Gas appliances also require installation by a licensed gasfitter with a compliance certificate. Your local council or building certifier can confirm exactly what your fit-out needs.
Do you deliver cooking equipment Australia-wide?
Yes. Commercial Kitchen Store delivers nationwide, covering Sydney, Melbourne, Brisbane, Adelaide and Perth metro plus regional freight routes. Floor models ship on a pallet to a ground-floor point, so check doorway and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you spec the right unit for your kitchen and your site.
The GasMax RB-6E is a six-burner commercial gas cooktop that gives busy kitchens open-burner cooking power on a compact benchtop footprint. It runs on natural gas with a rated output of 144 MJ/h and is built for back-to-back service.
Why operators choose the RB-6E
Six independent open burners — run multiple pots and pans at once across the line.
144 MJ/h gas output — high heat on tap for fast boils, searing and sustained service.
Piezo ignition with flame failure protection — quick light-up and an automatic gas cut-off for safety.
Stainless steel construction with S/S drip pans — wipes down fast and stands up to a commercial kitchen.
Flat heavy-duty trivets and a stainless splashback — stable for large pots, with a raised back to protect the wall.
Specifications
Brand
GasMax
Model / MPN
RB-6E
Type
Gas Cooktop / Stove
Burners
6
Gas type
Natural Gas
Gas output
144 MJ/h
Ignition
Piezo, with flame failure protection
Construction
Stainless Steel
Regulator size
3/4"
Adjustable height
45mm
Product dimensions
902(W) x 824(D) x 575(H)mm
Packed dimensions
900(W) x 1020(D) x 520(H)mm
Country of manufacture
China
Warranty
2 years parts & labour + 2 years parts only (with product registration)
Venue suitability: Suited to cafes, restaurants, pubs and catering kitchens that need six open gas burners for stockpots, sauces and high-volume cooking on a benchtop unit. It sits well alongside other Gas Cooktops and the wider GasMAX cooking range when you are building out a gas line.
Installation & delivery: Supplied configured for natural gas and must be connected by a licensed gas fitter. Dispatched Australia-wide.
Frequently asked questions
How many burners does the GasMax RB-6E have? It has six independent open gas burners.
What is the gas output of the RB-6E? The cooktop is rated at 144 MJ/h.
What gas type does the RB-6E use? It is configured for natural gas, with a 3/4" regulator connection.
Does the RB-6E have flame failure protection? Yes — it uses piezo ignition with flame failure protection that shuts off the gas if a burner goes out.
What warranty does the RB-6E come with? It is covered by 2 years parts and labour plus a further 2 years parts only when the product is registered.
The hotplate griddles series is designed with adjustable feet for easy benchtop placement as well as a removable drip tray and splashback. Featuring flame-out protection valves, independent controls and piezo ignition. Body made from type 304 stainless steel with heavy-duty 16mm hardened A3 cooking plates, this piece of kitchen equipment is easy to use, maintain and clean. With flame failure safety valves and pilot standby, this product is compatible with either natural gas or LPG and certified to AS 4563-2004, Certification No. GMK10515 through IAPMO OCEANA. NOTE: SOLD SEPARATELY: 900mm stainless steel stand, SKU: BASE1200 When you buy from AG Equipment, you know you’re getting a twenty-four-month parts and labour warranty from a trusted Australian supplier. Construction - Grill plate is 16mm A3 steel plate and the body is made of 304 materials.- Working area (mm): 1188(w) x 515(d)- Four high-efficiency stainless steel tubular burners (100 Mj output)- Splashback- Removable drip tray- Adjustable feet- SOLD SEPARATELY: Stainless steel base, SKU: BASE1200 Operation - Liquefied Propane Gas (gas tanks)- ¾ inch pipe gas inlet- Controls and valves with flame-out protection- Piezoelectric Ceramic Ignition device- Independent burner controls Safety - IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515- Flame-out safety valve Installation and Maintenance Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation in accordance with your local council code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly.Read the product manual thoroughly before installing and operating the unit to ensure correct instructions are followed.Check and ensure the gas regulator is set to Natural Gas or LPG as per requirement.Check and ensure gas pressure complies with the gas type being installed. NOTE:- Product images are for illustration purposes only, actual products may differ in appearance. Errors and omissions excepted (E&OE)SPECIFICATION GAS CONSUMPTION (MJ/H) 100 GASTYPE LPG NUMBER OF BURNERS 4 PACKAGE DIMENSION MM 1295(w) x 875(d) x 640(h) PRODUCT DIMENSION MM 1200(w) x 800(d) x 562(h) PRODUCT WEIGHT 143 Kg SHIPPING WEIGHT 182 WARRANTY SELECTTION 2 Years Parts & Labour
Incredibly powerful and reliable, the natural gas Thor radiant charbroiler is ideal for busy restaurants and other commercial catering establishments. Featuring heavy duty cast iron grilling plates and robust dial controls, the charbroiler is strong enough for even the busiest and most demanding of businesses. The attractive stainless steel exterior and removable waste tray ensures easy cleaning at the end of service. Includes flame failure protection for added safety. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 380(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Warranty 2 Years Weight 52kg Stainless Steel main body with smoothed out welds Two 4.4kw infrared burners Manual control valves with standing pilot as standard Stainless steel spill trays Easy clean, easy service AGA approved Flame failure protection Stand is included
Exceptionally powerful and reliable, the LPG Thor radiant charbroiler is ideal for busy commercial establishments.Featuring heavy duty cast iron grilling plates and robust dial controls, the charbroiler is strong enough for even the busiest and most demanding of businesses. The attractive stainless steel exterior and removable waste tray ensures easy cleaning at the end of service. Includes flame failure protection for added safety. Product features Dimensions 1175(H) x 381(W) x 835(D)mm Dimensions - cooking area 380(W) x 510(D)mm Material Stainless Steel Power Type Propane Gas Warranty 2 Years Weight 52kg Stainless Steel main body with smoothed out welds Two 4.4kw infrared burners Manual control valves with standing pilot as standard Stainless steel spill trays Cool dial Easy clean, easy service AGA approved Flame failure protection Stand is included
4 Tray Convection Oven x4 1x1 GN Trays Stainless steel cooking chamber with rounded corners Tempered low-e glass Overture Folding Door offers an innovative, high performance door solution for large opening applications LED alarms Interlocking gasket fixing system According to IPX3 standard norms High resistance hinge Temperature range of 50˚C - 280˚C 60 minute timer or infinite 84mm distance between trays Comes with 4 x 1/1GN trays Machine Dimension 686x660x580 mm Internal Dimension: 560x420x370 mm 1 Year Parts and Labour Warranty Power: 240V ; 3.1kW / 15AIncludes: 1 solid tray and 3 wire racks.
The TECNODOM by FHE TDE-3B is a bench-top electric convection oven that bakes and roasts across three 600 x 400mm trays, built for cafes, bakeries, delis and small commercial kitchens. It runs on a standard 240V 15A supply (3.1kW), holds a 50°C to 280°C temperature range and uses 84mm tray spacing for even airflow. A stainless steel cooking chamber with rounded corners and an Overture folding door make it easy to load, clean and operate in tight bench spaces.Why operators choose the TDE-3B
3 x 600 x 400mm trays — standard gastronorm-friendly tray size lets you bake croissants, par-bake bread and reheat trays in one batch.
240V 3.1kW / 15A — plugs into a single 15A outlet, so no three-phase wiring or special install is needed.
50°C to 280°C range — covers gentle proving and holding through to hot roasting and high-heat baking.
Stainless steel chamber with rounded corners — wipes down fast and resists corrosion through daily service.
Overture folding door with tempered low-E glass — opens clear of the bench front and retains heat for stable internal temperatures.
84mm tray spacing — lets convected air circulate around each tray for consistent browning top to bottom.
60-minute timer or continuous mode — time short bakes precisely or run the oven indefinitely for longer service periods.
IPX3-rated build with interlocking gasket fixing — designed for the splashes and wash-downs of a working kitchen.
Specifications
Brand
TECNODOM (by FHE)
Model / MPN
TDE-3B
SKU
TDE-3B
Type
Bench-top electric convection oven
Tray capacity
3 x 600 x 400mm trays (included)
Tray spacing
84mm
Temperature range
50°C – 280°C
Timer
60-minute or continuous
Power
240V; 3.1kW; 15A
External dimensions
775(W) x 700(D) x 560(H)mm
Internal chamber
650 x 460 x 350mm
Packed dimensions
800(W) x 740(D) x 710(H)mm
Weight
44kg
Chamber material
Stainless steel with rounded corners
Door
Overture folding door, tempered low-E glass
Ingress protection
IPX3
Warranty
1 Year Parts and Labour
Venue suitabilityWith three 600 x 400mm trays and a 15A plug-in supply, the TDE-3B suits cafes, bakeries, patisseries, delis and small restaurant kitchens that need reliable convection baking without committing to three-phase power. The compact 775mm-wide footprint sits neatly on a bench or stand, making it well matched to venues short on floor space. It is less suited to high-volume production kitchens that need rack-oven throughput, where a larger floor-standing oven would be the better fit.Compare it with other models in our convection ovens range, or browse the wider commercial ovens collection to weigh up larger-format options.Installation & deliveryThe TDE-3B connects to a standard 240V 15A power outlet and requires no hardwiring or gas connection, so it is ready to use straight out of the box. Leave clearance around the unit for airflow and door swing. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by a 1 Year Parts and Labour warranty.Frequently asked questionsHow many trays does the TDE-3B hold?It holds three 600 x 400mm trays, all included, with 84mm spacing between each for even air circulation. This makes it suitable for batch baking, par-baking and reheating in a single load.What power supply does it need?The TDE-3B runs on 240V single-phase power, drawing 3.1kW through a standard 15A outlet. No three-phase wiring or special electrical install is required, so it plugs in like other bench-top equipment.What temperature range does it reach?The oven operates from 50°C to 280°C, covering gentle proving and holding through to high-heat roasting and baking. A 60-minute timer or continuous mode lets you match the setting to the task.What size is the cooking chamber?The internal chamber measures 650 x 460 x 350mm, with external dimensions of 775(W) x 700(D) x 560(H)mm. The compact footprint is designed to fit on a bench or stand in space-tight kitchens. See our guide to bench-top oven efficiency for layout tips.Is a convection oven right for my venue?Convection ovens use a fan to circulate hot air for faster, more even cooking than static ovens, which suits cafes, bakeries and delis. Our guide to the best commercial ovens in Australia compares formats to help you choose.What warranty is included?The TDE-3B comes with a 1 Year Parts and Labour warranty. Keep your proof of purchase and follow the recommended cleaning and maintenance routine to keep the oven covered and performing.
GASMAX Benchtop 2 Bunner Griddle 600mm - JUS-TRG60ELPG Key Features Stainless Steel Construction Drip Tray Auto Ignition Flame Failure Shut-Off LPG Gas 36mj/h Tue Jan 02 2024 00:00:00 GMT+1100 (GMT+11:00)” Gas Inlet Consumption: 42MJ/h Optional Stand: JUS600E Gas Equipment Must Be Commissioned By An Authorised F.E.D. Technician. Call 1300 887 055 To Arrange. 2 Years Parts and Labour + 2 Years Parts only Warranty with Product RegistrationProduct Dimensions: 600(W) x 650(D) x 475+60(H)mmPower: 42MJ/h; ½” gas inlet
The GasMax JUS-TRH60ELPG is a benchtop gas chargrill that delivers high-heat searing for steaks, chops, seafood and vegetables across a compact 600mm footprint, running on two LPG burners.Why operators choose this chargrill
Two independent burners — split the grill into hot and holding zones so you can sear to order and rest without crowding.
56MJ/h gas output — strong, recoverable heat that keeps searing through a busy service.
Cast-iron grill bars & drip tray — lay down clean sear marks while fat drains away to a removable tray for quick clean-down.
Auto ignition with flame-failure shut-off — one-touch lighting and an automatic gas cut if a flame goes out.
Stainless steel construction — wipe-clean surfaces built for a commercial line.
Benchtop 600mm footprint — fits a tight cookline; pairs with optional stand JUS600E.
Specifications
Brand
GasMax
Model / MPN
JUS-TRH60ELPG
Type
Chargrill
Power Type
LPG
Gas Output
56MJ/h
Burners
2
Gas Inlet
1/2"
Ignition
Auto ignition with flame-failure shut-off
Material
Stainless Steel
Product Dimensions
605(W) x 650(D) x 475+60(H)mm
Packed Dimensions
700(W) x 750(D) x 510(H)mm
Net Weight
73kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Country of Manufacture
China
Venue suitability: A reliable searing station for cafes, pubs, burger bars, food trucks and function kitchens that need char-grilled output without committing floor space to a full freestanding grill. Browse more options in Chargrills or see the full GasMAX range to match it with griddles and cooktops on the same line.Installation & delivery: Gas equipment must be commissioned by an authorised technician before use. Dispatched Australia-wide.Frequently asked questionsDoes the GasMax JUS-TRH60ELPG run on LPG or natural gas? It is configured for LPG (liquefied petroleum gas).What is the gas output? The chargrill is rated at 56MJ/h total across its two burners.How wide is it? It has a 600mm-class benchtop footprint, measuring 605(W) x 650(D) x 475+60(H)mm.Does it need professional installation? Yes — as gas equipment it must be commissioned by an authorised gas technician before use.Is a stand available? Yes, the optional JUS600E stand is designed to suit this benchtop chargrill.
The Tecnodom TDE-4CGND is a four-tray electric convection oven from the Nerone EKO range, built for cafes, bakeries and commercial kitchens that need reliable batch cooking from a benchtop footprint.Why operators choose the TDE-4CGND
4 x GN 1/1 capacity — cooks multiple trays at once for consistent, high-volume service.
Double-fan convection — even heat distribution across every shelf for uniform browning.
Digital control with 9-recipe memory — store and recall settings for repeatable results.
50-280°C range — covers gentle proving through to high-heat roasting and baking.
Stainless steel cooking chamber — rounded corners and IPX3-rated build for easy cleaning and durability.
240V single-phase — plugs into a standard 15A socket, no three-phase install required.
Specifications
Brand
Tecnodom
Model / MPN
TDE-4CGND
Type
Convection Oven
Capacity
4 x GN 1/1 trays
Power Type
Electric
Power
240V, 3.15kW, 15A
Temperature Range
50°C to 280°C
Fan
Double fan
Control
Digital panel, 9-recipe memory, double display
External Dimensions
686W x 663D x 580H mm
Internal Dimensions
560 x 420 x 370mm
Packaged Dimensions
720W x 725D x 750H mm
Net Weight
37 kg
Material
Stainless Steel
Includes
1 solid tray and 3 wire racks
Warranty
1 Year Parts & Labour
Venue suitability: Ideal for cafes, patisseries, bakeries, delis and small-to-mid commercial kitchens that need dependable batch baking and reheating without a three-phase connection. Browse the full range of Convection Ovens to compare tray counts and footprints.Installation & delivery: Runs on a standard 240V 15A single-phase supply. Dispatched Australia-wide.Frequently asked questionsHow many trays does the Tecnodom TDE-4CGND hold? It holds 4 x GN 1/1 trays, with 84mm spacing between trays, and ships with 1 solid tray and 3 wire racks.What power supply does the TDE-4CGND need? It runs on 240V single-phase, drawing 3.15kW through a standard 15A socket, so no three-phase installation is required.What temperature range does it cover? The oven operates from 50°C to 280°C, suitable for proving, baking, roasting and reheating.Does it have a fan? Yes — it uses a double-fan convection system for even heat across all four trays, and the fans stop automatically when the door is opened.What warranty is included? The TDE-4CGND comes with a 1 Year Parts & Labour warranty.
The TECNODOM TDE-3BD is a digital bench-top convection oven from the NERONE EKO range, built to hold three 600x400mm trays and circulate heat evenly for consistent baking and roasting in busy kitchens.
Why operators choose the TDE-3BD
Double-fan convection — twin fans drive even heat across all three trays for uniform bakes batch after batch.
Digital control with recipe memory — a protected digital panel and double display store up to 9 recipes for fast, repeatable results.
Stainless steel cooking chamber — rounded corners and an interlocking gasket make daily cleaning and maintenance simple.
Wide temperature range — +50 to +280°C with a 60-minute or infinite timer covers proving through to high-heat roasting.
Safe, durable build — tempered low-e glass, halogen interior lighting, a high-resistance hinge, fan stop on door open, and IPX3-rated protection.
Specifications
Brand
TECNODOM
Model / MPN
TDE-3BD
Type
Convection Oven
Range
Nerone EKO Digital
Power Type
Electric
Capacity
3 x 600x400mm trays
Control
Digital, double display, 9-recipe memory
Fan
Double fan (stops on door open)
Temperature Range
+50 to +280°C
Timer
60-minute or infinite
Tray Pitch
105mm
Lighting
Internal halogen lamp
Glass
Tempered low-e
Protection Rating
IPX3
Material
Stainless Steel
External Dimensions
775 x 720 x 560mm
Internal Dimensions
650 x 459 x 350mm
Includes
1 solid tray and 2 wire racks
Warranty
1 Year Parts and Labour
Venue suitability: The compact 3-tray footprint suits cafes, bakeries, patisseries, quick-service kitchens and front-of-house finishing stations where bench space is tight but consistent convection results matter. It slots neatly into our range of Convection Ovens, so you can compare tray counts and controls across the family before you buy.
Installation & delivery: Supplied as a bench-top unit ready to position on a stable, level surface with adequate clearance and a suitable power supply. Dispatched Australia-wide.
Frequently asked questions
How many trays does the TECNODOM TDE-3BD hold? It holds three 600x400mm trays, with a 105mm pitch between tray positions.
What temperature range does the TDE-3BD reach? The oven operates from +50°C up to +280°C, with a 60-minute or infinite timer.
Is the TDE-3BD a digital oven? Yes. It has a digital control panel with a double display and memory for up to 9 recipes for repeatable cooking.
What is included with the oven? Each unit comes with 1 solid tray and 2 wire racks.
What warranty does the TDE-3BD come with? It is covered by a 1 Year Parts and Labour warranty.
The GasMax GG-48LPG is a four-burner LPG benchtop griddle that delivers a full-width 1200mm cooking surface for high-volume breakfast, burger and teppanyaki service.Why operators choose the GG-48LPG
Four heavy-duty U-shape burners — even heat across the whole plate for consistent results during peak service.
132 MJ/h gas input — rapid recovery so the plate stays hot under a steady stream of orders.
22mm mild-steel plate — thick, durable cooking surface that holds temperature and resists warping.
Flame failure protection — cuts gas automatically if a burner goes out, for safer all-day operation.
Front grease channel & stainless oil collector — faster clean-down and easier waste management.
Specifications
Brand
GasMax
Model / MPN
GG-48LPG
Type
Benchtop Gas Griddle
Fuel
LPG
Burners
4
Gas Input
132 MJ/h
Plate Thickness
22mm mild steel
Construction
Stainless Steel
Product Dimensions
1200(W) x 824(D) x 546(H)mm
Packed Dimensions
1335(W) x 890(D) x 520(H)mm
Net Weight
152 kg
Gas Connection
3/4-inch rear
Safety
Flame failure system
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Country of Manufacture
China
Venue suitability: Built for cafes, diners, food trucks, pubs and commercial kitchens that need a wide, fast-recovering griddle for continuous breakfast and grill service. It sits naturally alongside our other commercial griddles and the wider GasMAX cooking range when you are matching a cookline.Installation & delivery: Supplied LPG-ready with a 3/4-inch rear gas connection and field-convertible burners; installation by a licensed gasfitter is required. Dispatched Australia-wide.Frequently asked questionsIs the GG-48LPG natural gas or LPG? It is configured for LPG. Burners are field-convertible, so a licensed gasfitter can change the gas type where required (LPG option is not available in New Zealand).How many burners does it have? Four heavy-duty U-shape burners deliver a combined 132 MJ/h gas input across the plate.How thick is the cooking plate? The griddle uses a 22mm heavy-duty mild-steel plate that holds heat well and resists warping under sustained use.What are the dimensions? The unit measures 1200(W) x 824(D) x 546(H)mm and weighs 152 kg net.What warranty is included? It carries 2 Years Parts & Labour plus an additional 2 Years Parts Only when the product is registered within 14 days of invoice.
The GasMax GG-48 is a benchtop natural gas griddle that gives commercial kitchens a 1200mm continuous cooking surface for breakfast service, burgers, teppanyaki and high-volume griddle work.Why operators choose the GG-48
Four heavy-duty burners — each u-shape steel burner runs at 30 MJ/h (120 MJ/h total) for even, full-plate heat distribution.
22mm heavy-duty steel plate — holds and recovers heat under continuous load for consistent searing across the surface.
Flame failure protection — gas shuts off automatically if a burner is extinguished, for safer service.
Stainless steel construction — stainless body with a raised splashback and three-sided splash guard for easy wipe-down.
Front grease channel and oil collector — drains grease away from the cook zone into a stainless collector for quick clean-down.
Specifications
Brand
GasMax
Model / MPN
GG-48
Type
Benchtop Gas Griddle
Fuel
Natural Gas
Burners
4 (u-shape steel, 30 MJ/h each)
Gas Output
120 MJ/h
Griddle Plate
22mm heavy-duty steel
Construction
Stainless Steel
Product Dimensions
1200(W) x 824(D) x 546(H)mm
Packed Dimensions
1335(W) x 890(D) x 520(H)mm
Net Weight
152 kg
Gas Connection
3/4-inch rear
Safety
Flame failure system
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Venue suitability: The wide 1200mm plate and 120 MJ/h output suit busy cafes, pubs, food trucks and hotel kitchens running all-day breakfast or burger service. Browse the full Griddles range or see more from GasMAX to match it with the rest of your cookline.Installation & delivery: Connects to a natural gas supply via the 3/4-inch rear connection and must be commissioned by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsDoes the GasMax GG-48 run on natural gas or LPG? The GG-48 is the natural gas model. A separate LPG variant (GG-48LPG) is available if you need bottled gas.How many burners does the GG-48 have and what is the total output? It has four heavy-duty u-shape steel burners rated at 30 MJ/h each, for a combined 120 MJ/h.How wide is the cooking surface? The griddle has an overall width of 1200mm, giving a large continuous steel cooking plate.How thick is the griddle plate? The plate is 22mm heavy-duty steel, which holds heat well and recovers quickly under continuous use.What warranty does the GG-48 come with? It carries 2 years parts and labour plus an additional 2 years parts-only cover when the product is registered.
The GasMax RGT-36ELPG is a three burner LPG griddle that delivers a large, even flat-top cooking surface for high-volume breakfast, burger and teppanyaki service in commercial kitchens. Why operators choose the RGT-36ELPG
Three heavy-duty burners — 29.52 MJ each (90.06 MJ/h total) for fast heat-up and quick recovery under load.
20mm removable mild steel plate — thick, even heat retention and easy cleaning between services.
Auto ignition & flame failure — reliable lighting with an automatic gas shut-off for added safety.
Stainless steel construction — durable, hygienic and easy to wipe down in a busy kitchen.
S/S drip tray & adjustable feet — clean grease management and 45mm height adjustment for level installation. Specifications
Brand
GasMax
Model / MPN
RGT-36ELPG
Type
Griddle
Fuel
LPG
Burners
3 (29.52 MJ each)
Gas output
81 MJ/h
Total burner rating
90.06 MJ/h
Gas inlet
3/4 inch
Plate
20mm removable mild steel
Ignition
Auto ignition with flame failure shut-off
Construction
Stainless Steel
Product dimensions
910(W) x 850(D) x 420(H)mm
Packed dimensions
980(W) x 1080(D) x 540(H)mm
Net weight
130 kg
Matching stand
QR-36-S
Warranty
2 years parts & labour + 2 years parts only with product registration
Country of manufacture
China
Venue suitability: Ideal for cafes, diners, pubs, food trucks and takeaway kitchens running cooked-to-order breakfasts, burgers and teppanyaki-style service where a large, fast-recovering flat top is needed. Browse the full Griddles range or see more GasMAX cooking equipment to match your line-up. Installation & delivery: Connects to LPG via a 3/4-inch gas inlet and should be commissioned by a licensed gas fitter. Pairs with the matching QR-36-S stand. Dispatched Australia-wide. Frequently asked questions What fuel does the RGT-36ELPG use? It runs on LPG gas and connects via a 3/4-inch gas inlet. How many burners does it have? Three heavy-duty burners rated at 29.52 MJ each, for a total of 90.06 MJ/h. Is the griddle plate removable? Yes — it uses a 20mm heavy-duty mild steel plate that can be removed for cleaning. What are the product dimensions? 910mm wide x 850mm deep x 420mm high, with a net weight of 130 kg. What warranty does it come with? 2 years parts and labour plus 2 years parts only when the product is registered.
The GasMax RGT-36E is a three burner gas griddle that delivers a continuous, even cooking surface for high-volume breakfast, burger and teppanyaki service in a commercial kitchen. Why operators choose the RGT-36E
Three heavy-duty burners — 84 MJ/h total for fast heat-up and rapid recovery under load.
20mm removable steel plate — holds heat evenly across the surface and lifts out for thorough cleaning.
Auto ignition with flame failure shut-off — safer, quicker starts and automatic gas cut-off if a flame goes out.
Natural gas or LPG — one unit suits either gas supply on site.
Stainless steel body with drip tray — durable, hygienic and easy to wipe down between services. Specifications
Brand
GasMax
Model / MPN
RGT-36E
Type
Gas Griddle
Burners
3
Gas Output
84 MJ/h
Gas Type
Natural Gas or LPG
Gas Inlet
3/4-inch
Plate
20mm removable steel plate
Ignition
Auto ignition with flame failure shut-off
Construction
Stainless Steel
Product Dimensions
910(W) x 840(D) x 420(H)mm
Packed Dimensions
980(W) x 1080(D) x 540(H)mm
Net Weight
130 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration)
Venue suitability: A benchtop griddle of this output suits cafes, pubs, food trucks, diners and catering kitchens running steady grill service across the day. Browse the rest of our Griddles range or see the full GasMAX line-up to match this unit with a compatible stand. Installation & delivery: Connects to natural gas or LPG and should be commissioned by a licensed gas fitter. Dispatched Australia-wide. Frequently asked questions How many burners does the RGT-36E have? It has three heavy-duty gas burners delivering 84 MJ/h in total. Does it run on natural gas or LPG? It is suited to both natural gas and LPG supply. Is the griddle plate removable? Yes — the 20mm steel plate lifts out for thorough cleaning. What ignition does it use? Auto ignition with a flame failure shut-off that cuts the gas if a flame goes out. What warranty does it come with? 2 Years Parts & Labour plus 2 Years Parts Only when the product is registered.
Part of AG Equipment’s gas cooking series, our OVST range of heavy-duty commercial cooktops with ovens provide a stylish and high-quality experience in any commercial kitchen Constructed from high-quality stainless steel, with flame-out protection valves, our gas cooktop ranges make a great addition to your kitchen. The AG Equipment gas products with ovens, come with IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515. Backed by AG Equipment 2 year parts and labour warranty you can be sure you are buying the highest quality commercial kitchen equipment from a trusted Australian supplier. Construction Constructed from high-quality 304-grade stainless steel (Front back and sides) Stainless steel kick plate including back guard and tall stainless-steel splashback Flame-out protection valves Standby pilots Stylish and easy-to-clean knobs and handle Adjustable stainless steel legs ¾ Inch (19mm) gas inlet Regulator included Cook Top Manual Ignition for the cooktops and Piezo Ignition for the oven 4 Burner (28 Mj output per burner) Easy to use low to high temp controls Heavy-duty matte black cast iron trivets Oven 100% safety shut off for the oven Heavy-duty quality thermostat Multi-position oven rack guides and single chrome oven rack included Static Oven Piezo ignitors 26MJ/h Installation and Maintenance Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation in accordance with your local council code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly. Please note that this unit can NOT be converted. Read the product manual thoroughly before installing and operating the unit to ensure correct instructions are followed. Check and ensure the gas regulator is set to Natural Gas or LPG as per requirement. Check and ensure gas pressure complies with the gas type being installed. NOTE:- Product images are for illustration purposes only, actual products may differ in appearance. Errors and omissions excepted (E&OE)SPECIFICATION GAS CONSUMPTION (MJ/H) 138 GASTYPE LPG INTERNAL OVEN DIMENSION 508(w) x 610(d) x 330(h) NUMBER OF BURNERS 4 PACKAGE DIMENSION MM 685(w) x 995(d) x 1025(h) PRODUCT DIMENSION MM 600(w) x 800(d) x 1115(h) PRODUCT WEIGHT 130 kg SHIPPING WEIGHT 176 kg WARRANTY SELECTTION 2 Years Parts & Labour
The TECNODOM TDE-4CG is a bench-top electric convection oven that bakes, roasts and grills four 435x350mm trays at once, combining true fan-forced convection with a dedicated grill element for high-volume cafe, bakery and front-of-house cooking.
Why operators choose the TDE-4CG
Grill & grill + convection functions — switch between fan-forced baking and overhead grilling for browning, finishing and gratinating without a second appliance.
Twin-fan even bake — two fans circulate heat through a stainless chamber with rounded corners for consistent colour tray to tray.
Wide 50-280°C range — proofing-low through hard-roast temperatures with a 60-minute or infinite timer.
Overture folding door with tempered low-e glass — a high-performance large-opening door that clears bench space when loading.
Service-friendly build — interlocking gasket fixing system, high-resistance hinge and IPX3-rated construction for easy cleaning and durable daily use.
Specifications
Brand
TECNODOM
Model / MPN
TDE-4CG
Type
Convection Oven (with grill)
Power type
Electric
Power
2.35 kW, 240V, 10A
Capacity
4 x 435 x 350mm trays
Tray spacing
84mm
Temperature range
50–280°C
Timer
60-minute or infinite
Functions
Grill, Grill + Convection
Door
Overture folding door, tempered low-e glass
External dimensions
589W x 660D x 580Hmm
Internal dimensions
464W x 420D x 370Hmm
Package dimensions
720W x 625D x 725Hmm
Controls
3 knobs
Includes
1 solid tray, 3 wire racks
Material
Stainless steel
Warranty
12 months parts & labour
Venue suitability: A compact bench-top footprint with four-tray output suits cafes, bakeries, patisseries, delis and pub kitchens that need fan-forced baking plus grilling from a single electric appliance on a 10A circuit. Browse the full Convection Ovens range to compare tray counts and footprints across the Commercial Kitchen Store catalogue.
Installation & delivery: Plugs into a standard 240V 10A outlet — no special connection required. Dispatched Australia-wide.
Frequently asked questions
What tray size and how many does the TECNODOM TDE-4CG hold? It holds four 435 x 350mm trays with 84mm spacing between each runner.
Does the TDE-4CG have a grill? Yes — it offers a dedicated grill function as well as a combined grill + convection mode for browning and finishing.
What power supply does the TECNODOM TDE-4CG need? It runs on single-phase 240V at 2.35kW, drawing 10A, so it connects to a standard power outlet.
What temperature range does the TDE-4CG reach? The oven operates from 50°C to 280°C with a 60-minute or infinite timer.
What are the external dimensions of the TDE-4CG? The oven measures 589mm wide x 660mm deep x 580mm high.
The Tecnodom TDE-4CGNG is a bench-top convection oven that grills and bakes from a single stainless steel chamber, holding 4 x GN 1/1 trays for cafes, takeaways and bakeries that need consistent results without a floor-standing footprint.
Why operators choose the TDE-4CGNG
Grill and convection in one — a dedicated Grill plus Grill + Convection function lets one unit brown, finish and bake.
Even, fast cooking — rear fans circulate heat across all 4 GN 1/1 trays for uniform results.
Built to clean — stainless steel chamber with rounded corners and an interlocking gasket fixing system simplify daily wipe-downs.
Safe and serviceable — fans stop when the door opens, a high-resistance hinge and IPX3-rated build suit busy service.
Clear control — simple 3-knob panel with a 50–280°C range and a 60-minute or infinite timer.
Specifications
Brand
Tecnodom
Model / MPN
TDE-4CGNG
Type
Convection Oven
Capacity
4 x GN 1/1
Power Type
Electric
Power
240V, 3.15kW
Functions
Grill, Grill + Convection
Temperature Range
50–280°C
Timer
60-minute or infinite
Tray Spacing
84 mm
External Dimensions
686W x 660D x 580H mm
Internal Dimensions
560 x 420 x 370mm
Net Weight
37 kg
Packing Dimensions
720 x 725 x 750 mm
Material
Stainless Steel
Includes
1 solid tray and 3 wire racks
Warranty
1 Year Parts & Labour
Venue suitability: The compact bench-top footprint and 4 x GN 1/1 capacity suit cafes, bakeries, takeaways, function kitchens and back-of-house finishing stations where a full combi or rack oven is more than the menu needs.
Comparing options? Browse our full range of Convection Ovens to match tray count and footprint to your space.
Installation & delivery: Runs on a standard 240V supply via a 15A socket — no three-phase required. Dispatched Australia-wide.
Frequently asked questions
How many trays does the Tecnodom TDE-4CGNG hold? It holds 4 x GN 1/1 trays, with 84 mm spacing between each tray.
Does the TDE-4CGNG have a grill function? Yes. It offers a dedicated Grill function as well as a combined Grill + Convection mode, so one unit can brown, finish and bake.
What power supply does the TDE-4CGNG need? It runs on single-phase 240V drawing 3.15kW through a 15A socket, so no three-phase connection is required.
What is the temperature range? The oven operates from 50°C to 280°C, controlled via the simple 3-knob panel with a 60-minute or infinite timer.
What is included with the oven? Each unit ships with 1 solid tray and 3 wire racks.
The Ideal char grill for restaurants and commercial kitchens that need extra char grill space. Manually controlled independent burners, this unit gives you dependable BBQ grill space without the bulk. Easy to start piezoelectric ignition with safety flame failure. Heavy-duty frame and corrosion-resistant, seam-free 304 stainless steel finish on the front, sides, and legs, easy to remove drip tray allow for quicker kitchen cleanup.
Fully adjustable screw-on legs & undershelf included ensuring a finely tuned, stable cooking surface. Quality 304 stainless steel construction.
Heavy-duty constructed frame
Heavy-duty burners & standby pilots
Flame failure
Stainless steel burners
Stainless steel splash-back
Constructed in 304 stainless steel
¾ inch pipe gas inlet
4 adjustable legs & solid undershelf
Removal front drip tray
Easy piezoelectric ignition to all burners
Independent burner controls
Corrosion-resistant, easy to maintain & keep clean
Dimensions: 600(W) x 800(D) x 1115(H)mmWarranty: 48 Months Parts & 24 Labour
The Ideal char grill for restaurants and commercial kitchens that need extra char grill space. Manually controlled independent burners, this unit gives you dependable BBQ grill space without the bulk. Easy to start piezoelectric ignition with safety flame failure. Heavy-duty frame and corrosion-resistant, seam-free 304 stainless steel finish on the front, sides, and legs, easy to remove drip tray allow for quicker kitchen cleanup.
Fully adjustable screw-on legs & undershelf included ensuring a finely tuned, stable cooking surface. Quality 304 stainless steel construction.
Heavy-duty constructed frame
Heavy-duty burners & standby pilots
Flame failure
Stainless steel burners
Stainless steel splash-back
Constructed in 304 stainless steel
¾ inch pipe gas inlet
4 adjustable legs & solid undershelf
Removal front drip tray
Easy piezoelectric ignition to all burners
Independent burner controls
Corrosion-resistant, easy to maintain & keep clean
Dimensions: 600(W) x 800(D) x 1115(H)mmWarranty: 48 Months Parts & 24 Labour
A heavy duty freestanding natural gas griddle with flame failure protection, made from robust stainless steel and featuring independent cooking zones that are manually controlled for flexible use.Has large, robust dial controls, burner safety valves, a removable waste tray and hardwearing adjustable feet for easy manoeuvrability and operation. Supplied with stand.Please ensure this product is installed by qualified commercial gas fitter, as failure to do so will result in warranty being voided. Product features Dimensions 942(H) x 610(W) x 835(D)mm Dimensions - cooking area 606(W) x 510(D)mm Material Stainless Steel Power Type Natural Gas Supplier Model Number TR-G24F-NG(A) Warranty 2 Years Weight 82kg Manually controlled, independent cooking zones Large, robust dial controls Stainless steel burners Burner safety valves Removable waste tray Heavy duty adjustable feet Flame failure protection AGA approved 3/4" rear gas connection SAI Global Approval for AS4563-2004 certificate SAI-400043 issued 17th Jan 2014 Supplied with stand
AG Equipment’s Italian-made single-level deck electric oven with the stone hearth is a perfect option for busy restaurants and pizzerias that are regularly producing pizza, pretzels, flatbreads, and many other bakery products. The efficient design allows you to bake either directly on the hearth deck or on screens, pans or baking sheets. Top and bottom temperature controls and manual shut-off come as standard. Our TRAYS GLASS electric deck ovens come with a larger than the standard window so you can even better keep track of your baking. Backed by AG Equipment's 12-month warranty you can be sure you are buying the highest quality commercial kitchen equipment from a trusted Australian-based supplier. Appearance High-quality steel construction with a stainless front. Internal lights so you can see your items through our large viewing window. Construction Can fit 2 x patisserie size tray (600mm x 400mm) / 4 x 40cm pizzas. The internal dimension of the chamber is mm 820(w) x 840(d) x 175(h). Heavy-duty stone base. Operation Individual temperature controls for top and bottom heating elements. Analog temperature control/gauge. CE Approved Installation This unit can be configured for a three-phase electrical connection or Single Phase (cable not included) and will require a qualified electrician to install. NOTE:- Product images are for illustration purposes only, actual products may differ in appearance. Errors and omissions excepted (E&OE)SPECIFICATION CURRENT 30 Amp (230v) / 10 Amp (400v) FREQUENCY 50Hz INPUT POWER 6900 W PACKAGE DIMENSION MM 1150(w) x 1150(d) x 543(h) PRODUCT DIMENSION MM 1110(w) x 1074(d) x 413(h) PRODUCT WEIGHT 103.5 kg SHIPPING WEIGHT 116 kg TEMPERATURE RANGE +50° / +455° VOLTAGE 230v / 400v WARRANTY SELECTTION 12 Month Parts & Labour
The GasMax REB-03E is a heavy-duty natural gas salamander that delivers fast overhead infrared heat for grilling, finishing and au gratin work, built for busy restaurants, cafes and steak and seafood kitchens. Three ceramic infrared burners draw 42MJ/h on natural gas across a 630 x 400mm grill area, while an adjustable cast iron cooking surface lets the chef set the gap to the burners for searing or gentle finishing. A welded stainless steel body and cast iron components stand up to continuous high-temperature service. Why operators choose the REB-03E
3 ceramic infrared burners at 42MJ/h — rapid, even overhead heat for searing steak, melting cheese and finishing plates to order.
Adjustable cast iron cooking surface — raise or lower the grill to the burners to switch between hard sear and gentle finishing.
630 x 400mm grill area — enough working space to run several plates at once during peak service.
Auto ignition with pilot light — quick, reliable lighting at the start of every shift with no manual flame chasing.
Flame failure shut-off — cuts the gas automatically if a burner goes out, a core safety feature for a busy line.
Heavy-duty stainless steel construction — resists heat, grease and daily cleaning in a commercial kitchen.
Safe and easy tray lifting system — simpler, safer handling of the cooking tray during service and cleaning.
Includes heavy-duty cast iron shelf — supplied ready to grill, with a matching stainless steel stand available. Specifications
Brand
GasMax
Model / MPN
REB-03E
SKU
REB-03E
Type
Natural Gas Salamander
Gas type
Natural Gas
Burners
3 ceramic infrared burners
Gas consumption
42MJ/h
Regulator size
3/4"
Cavity size
680 x 410 x 395mm
Grill area
630 x 400mm
Ignition
Auto ignition with pilot light
Safety
Flame failure shut-off
Cooking surface
Adjustable cast iron
Construction
Heavy-duty stainless steel
Gas connection
Under appliance, 30mm from right side rear
Product dimensions (W x D x H)
914 x 522 x 580mm
Packed dimensions (W x D x H)
1020 x 650 x 760mm
Net weight
75kg
Packed weight
87kg
Warranty
2 Years Parts and Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability The REB-03E suits medium-to-large restaurants, steakhouses, seafood kitchens, hotels and gastro-pubs that need a dedicated finishing and grilling station alongside the main cookline. The adjustable cast iron surface makes it a strong choice where one unit has to switch between hard searing and gentle au gratin or cheese-melting work. It is less suited to small cafes with no natural gas connection, since this model runs on natural gas and must be hard-piped by a licensed gas fitter. Browse more benchtop grills or see the full GasMax range to compare burner power and grill sizes across the lineup. Installation & delivery The REB-03E connects to natural gas via a 3/4" regulator, with the gas connection under the appliance 30mm from the right side rear; installation must be carried out by a licensed gas fitter. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by 2 years parts and labour plus 2 years parts only when you register the product within 14 days of invoice. Frequently asked questions What gas does the GasMax REB-03E use?The REB-03E runs on natural gas, drawing 42MJ/h across three ceramic infrared burners through a 3/4" regulator. It must be connected and commissioned by a licensed gas fitter. How big is the grilling area?The grill area measures 630 x 400mm, set within a 680 x 410 x 395mm cavity. The overall unit is 914mm wide, 522mm deep and 580mm high, so allow bench space accordingly. Can I adjust the cooking height?Yes. The cast iron cooking surface is adjustable, so you can move the grill closer to the burners for a hard sear or further away for gentle finishing, melting and au gratin work. What safety features does it have?The salamander has auto ignition with a pilot light for reliable lighting, plus flame failure shut-off that automatically cuts the gas supply if a burner goes out during service. What warranty comes with the REB-03E?It carries 2 years parts and labour plus a further 2 years parts only, provided you register the product within 14 days of invoice. What else do I need to plan for installation?Because it is hard-piped to natural gas, factor a licensed gas fitter and adequate clearance into your kitchen layout. Our guide to setting up a commercial kitchen covers planning the cookline around equipment like this. Where does a salamander fit in a commercial kitchen?A salamander is an overhead grill used for finishing, browning, melting and toasting rather than primary cooking. See our essential commercial kitchen equipment list for how it complements ranges, ovens and fryers.
The GasMax REB-03ELPG is a heavy-duty LPG salamander that sears steak, finishes seafood and chars vegetables across a 630 x 400mm grill area. Three ceramic infrared burners deliver 42MJ/h of fast radiant heat, while the stainless steel body and adjustable cast iron cooking surface stand up to high-volume service. Auto ignition with a pilot light and a flame-failure shut-off make it a dependable benchtop griller for restaurants and busy cafes. Why operators choose the REB-03ELPG
42MJ/h gas output — three ceramic infrared burners reach searing temperature quickly for fast steak and seafood turnaround.
630 x 400mm grill area — enough cooking surface to run multiple proteins at once during peak service.
Heavy-duty stainless steel construction — resists the heat, grease and daily wear of a commercial line.
Adjustable cast iron cooking surface — set the grill height to control char and finish across different cuts.
Auto ignition and pilot light — consistent, hands-free start-up every shift.
Flame-failure shut-off — cuts the gas supply if the flame goes out, for safer operation.
Heavy-duty cast iron shelf included — ready to plate and hold finished product straight from the box. Specifications
Brand
GasMax
Model / MPN
REB-03ELPG
SKU
REB-03ELPG
Type
Salamander Grill
Gas type
LPG
Gas consumption
42MJ/h
Burners
3 x ceramic infrared
Grill area
630 x 400mm
Cavity size
680 x 410 x 395mm
Regulator size
3/4"
Dimensions (W x D x H)
914 x 522 x 580mm
Packed dimensions (W x D x H)
1020 x 650 x 760mm
Net weight
75kg
Packed weight
87kg
Construction
Heavy-duty stainless steel
Cooking surface
Adjustable cast iron
Ignition
Auto ignition with pilot light
Safety
Flame-failure shut-off
Warranty
2 Years Parts & Labour + 2 Years Parts Only with product registration within 14 days of invoice
Venue suitability The 42MJ/h output and 630 x 400mm grill area suit medium to large restaurants, steakhouses, pubs and seafood kitchens that need to sear and finish under high radiant heat throughout service. The adjustable cast iron surface gives chefs control over char on everything from steaks to vegetables. It is less suited to small cafes with light grilling needs, where a compact benchtop griddle would be more economical. Browse the full GasMax range or compare other models in our benchtop grills collection. Installation & delivery This salamander runs on LPG with a 3/4" regulator and the gas connection sits 30mm from the rear right side, so it must be connected and commissioned by a licensed gas fitter to comply with Australian regulations. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. It is backed by 2 years parts and labour plus a further 2 years parts only when you register the product within 14 days of invoice. Frequently asked questions What gas does the GasMax REB-03ELPG use?This model runs on LPG. It draws 42MJ/h across three ceramic infrared burners and uses a 3/4" regulator, so it should be installed and commissioned by a licensed gas fitter. How much cooking space does it have?The grill area measures 630 x 400mm within an overall cavity of 680 x 410 x 395mm, enough to run several proteins at once during a busy service. How do I control the char on different cuts?The adjustable cast iron cooking surface lets you raise or lower the food relative to the infrared burners, giving you finer control over searing and finishing across steaks, seafood and vegetables. What safety features does it include?It uses auto ignition with a pilot light for hands-free start-up and a flame-failure shut-off that cuts the gas supply if the flame goes out, reducing the risk of unburnt gas escaping. How do I keep a stainless steel salamander clean?Wipe down the stainless body and clear grease from the cast iron surface and tray daily. See our commercial kitchen cleaning guide for a full routine. What warranty does it come with?It is covered by 2 years parts and labour plus a further 2 years parts only, provided you register the product within 14 days of invoice. Is GasMax a good choice for a commercial kitchen?GasMax builds value-focused gas cooking equipment in heavy-duty stainless steel. For how it compares to other options, read our guide to the best commercial kitchen equipment brands for Aussie chefs.
GASMAX Benchtop 2 Bunner Griddle 600mm - JUS-TRG60LPG Stainless Steel Construction Drip Tray Auto Ignition Flame Failure Shut-Off LPG Gas 36mj/h ½” Gas Inlet Consumption: 42MJ/h * Gas Equipment Must Be Commissioned By An Authorised F.E.D. Technician. Call 1300 887 055 To Arrange. 2 Years Parts and Labour + 2 Years Parts only Warranty with Product RegistrationPower: 42MJ/h; ½” gas inlet