Commercial cooking equipment for Australian hospitality venues — the full hot-side department in one place, covering gas ranges and ovens, fryers, griddles and chargrills, benchtop and induction units, and specialty cookers. The two biggest categories sit one click away: gas oven ranges for the centrepiece of the cooking line, and commercial deep fryers for everything crumbed, battered or chipped. If you're still working out what your kitchen actually needs, the sections below map the whole department so you can shortlist by equipment type first and compare models second.
Who this equipment is for
Every food business that cooks on site buys from this department — what varies is the mix. A café bistro might run a 600mm four-burner cooktop, a griddle and a single-pan fryer. A pub kitchen adds a chargrill and a bank of fryers to keep schnitzels and chips moving on a Friday night. Fish-and-chip shops live and die by fryer recovery times, and Asian restaurants spec dedicated wok burners with heat output no domestic stove can approach. Food trucks and market stalls lean on compact LPG and benchtop gear, while ghost kitchens in all-electric sites are increasingly going induction from day one. The common thread is commercial duty: heavier burners, thicker plate and components rated for service that runs all day, every day.
What's in scope
Ranges and ovens
The backbone of the line. Gas ranges pair open burners with a static or fan-forced oven base, while standalone ovens run from convection and pizza deck models through to combi steam ovens that steam, roast and bake from a single cabinet. High-speed ovens and commercial microwaves round out the category for quick-service reheats and snack menus.
Fryers
From single-pan benchtop units handling a café's side orders to multi-pan gas floor models built for takeaway volume. The range spans tube-style gas burners, electric element models and induction fryers, with oil capacities from a few litres up to serious production units — and recovery speed, not just capacity, is what separates them in service.
Griddles and grills
Flat-plate commercial griddles cover breakfasts, burgers and toasted sandwiches; chargrills add the sear lines and char flavour that sell steaks; and salamanders mount above the pass for melting, gratinating and finishing plates on the way out.
Benchtop and induction
Counter-height versions of nearly every category above — cooktops, fryers, griddles and grills — plus the induction and infrared cooking range, which suits venues without a gas supply, front-of-house cooking stations, and kitchens looking to cut both the heat in the room and the energy bill.
Specialty cooking
The harder-to-find gear lives here too: Asian-style wok ranges with high-output burners, pasta cookers, kebab machines, rotisseries and tandoori ovens. These are the categories where buying genuinely commercial matters most, because there's no domestic substitute that survives a real service.
How to choose commercial cooking equipment in three steps
With sixteen-odd equipment types in one department, the quickest path to a shortlist is to settle three things in order.
Step 1 — Settle the fuel type
Natural gas is the traditional pick where the site has supply — strong, visible heat that most chefs know — but every gas appliance must be installed by a licensed gasfitter. LPG covers food trucks and sites without mains gas. Electric is the simplest install for ovens, griddles and fryers, and induction delivers the fastest response with the least waste heat. Whichever way you go, confirm whether the unit runs from a standard 10-amp outlet or needs a three-phase connection before you buy.
Step 2 — Size to your peak throughput
Spec for your busiest service, not the average Tuesday. Count covers at peak, work out what share of the menu comes off each appliance, and pay attention to recovery — how quickly a fryer climbs back to temperature after a frozen basket drops, or how evenly a griddle holds heat across the full plate. Undersized gear stalls the whole line; oversized gear burns energy and bench space you'll want back.
Step 3 — Fit the footprint and the ventilation
Measure the position before you fall for a model. Floor units need clearances and service access; benchtop units need a bench rated for the weight and the heat. Most commercial cooking appliances also have to sit under a mechanical exhaust canopy, so confirm canopy coverage and your ventilation requirements with your certifier early — it's far cheaper to plan around than to retrofit.
The category covers the powered appliances a food business cooks on: ranges and cooktops, ovens (convection, combi, pizza deck, high-speed and microwave), deep fryers, griddles, chargrills, salamanders and induction units, plus specialty gear like wok ranges, pasta cookers, kebab machines and rotisseries. It differs from domestic equipment in burner output, build weight and duty cycle — commercial units are designed to hold temperature through hours of continuous service.
Should I choose gas, electric or induction?
Gas suits venues with mains supply and menus built around open-flame cooking — wok work especially. Electric is easier to install and does the job for most ovens, fryers and griddles. Induction is the most energy-efficient of the three, heats fastest and keeps the kitchen cooler, though it needs induction-compatible cookware and, on larger units, a three-phase connection. Plenty of kitchens mix all three across the line.
What's the difference between a commercial range and a cooktop?
A range combines burners with an oven in the base, so one footprint does two jobs — the classic centrepiece of a small or mid-size kitchen. A cooktop is burners only, sitting on a stand or bench, which makes sense when you'd rather pick your oven separately — a combi or convection model, say — or when you simply don't need more oven capacity.
Do you sell commercial air fryers?
Domestic-style air fryers aren't built for commercial duty cycles, so you won't find them in a serious kitchen. The same job — fast, fan-forced cooking with little or no oil — is done at venue scale by convection ovens and high-speed ovens, both of which we stock. And where the menu calls for genuinely fried texture at volume, a proper commercial deep fryer remains the right tool.
Do commercial cooking appliances need an exhaust canopy?
In most cases, yes. Australian ventilation requirements (AS 1668.2) mean cooking processes that produce heat, smoke or grease-laden vapour generally need mechanical exhaust, so plan the canopy alongside the equipment rather than after it. Gas appliances also require installation by a licensed gasfitter with a compliance certificate. Your local council or building certifier can confirm exactly what your fit-out needs.
Do you deliver cooking equipment Australia-wide?
Yes. Commercial Kitchen Store delivers nationwide, covering Sydney, Melbourne, Brisbane, Adelaide and Perth metro plus regional freight routes. Floor models ship on a pallet to a ground-floor point, so check doorway and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you spec the right unit for your kitchen and your site.
The commercial chargrill is designed for takeaway shops to inner-city restaurants. Made from stainless steel with a generous splashback, removable drip tray and adjustable feet, this piece of equipment features heavy-duty cast-iron cooking plates and is corrosion resistant for easy to maintain and clean.
Certified by IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515, this chargrill is compatible with either natural gas or LPG, designed with a Piezo ignition and flame-out protection safety valve.
BASE SOLD SEPARATELY: 900 mm stainless steel base, SKU: BASE900
When you buy from AG Equipment, you know you’re getting a twenty-four-month parts and labour warranty from a trusted Australian supplier.
Construction
- Working Area (mm): 866(w) x 525(d)- Stainless steel construction- Three high-efficiency stainless steel tubular burner- Heavy-duty cast-iron cooking grill- Splashback- Removable drip tray- Adjustable feet- BASE SOLD SEPARATELY: 900 mm stainless steel base, SKU: BASE900
Operation
- NG (Natural Gas, gas mains)- ¾ inch pipe gas inlet- flame-out protection valves- Piezoelectric ceramic ignition- Independent burner controls
Safety
- IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515- Flame failure safety valve
Installation and Maintenance
- Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation in accordance with your local council code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly.- Read the product manual thoroughly before installing and operating the unit to ensure correct instructions are followed.- Check and ensure the gas regulator is set to Natural Gas or LPG as per requirement.- Check and ensure gas pressure complies with the gas type being installed.
NOTE:- Product images are for illustration purposes only, actual products may differ in appearance.
Errors and omissions excepted (E&OE)
SPECIFICATION
GAS CONSUMPTION (MJ/H)
79.5
GASTYPE
Natural Gas
NUMBER OF BURNERS
3
PACKAGE DIMENSION MM
995(w) x 875(d) x 640(h)
PRODUCT DIMENSION MM
900(w) x 800(d) x 562(h)
PRODUCT WEIGHT
98 Kg
SHIPPING WEIGHT
128 kg
WARRANTY SELECTTION
2 Years Parts & Labour
Body made from type 304 stainless steel with heavy-duty 16mm hardened A3 hardened cooking plates, the hotplate griddle series is made for restaurants, bistros, take-away shops and catering businesses. Designed with adjustable feet for easy bench-top placement and features a removable drip tray and splashback. This piece of kitchen equipment comes with flame-out protection valves with independent controls for easy use, maintenance and cleaning.
Compatible with either natural gas or LPG, this hotplate is certified by IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515.
NOTE: SOLD SEPARATELY: 900mm stainless steel stand, SKU: BASE900
When you buy from AG Equipment, you know you’re getting a twenty-four-month parts and labour warranty from a trusted Australian supplier.
Construction
- Grill plate is a 16mm A3 steel plate and the body is made of 304 materials.- Working area (mm): 888(w) x 515(d)- Three high-efficiency stainless steel tubular burners (75 Mj output)- Splashback- Removable drip tray- Adjustable feet- SOLD SEPARATELY: Stainless steel base, SKU: BASE900
Operation
- Natural Gas (gas mains)- ¾ inch pipe gas inlet- Controls and valves with flame-out protection- Piezoelectric Ceramic Ignition device- Independent burner controls
Safety
- IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515- Flame-out safety valve
Installation and Maintenance
Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation in accordance with your local council code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly.Read the product manual thoroughly before installing and operating the unit to ensure correct instructions are followed.Check and ensure the gas regulator is set to Natural Gas or LPG as per requirement.Check and ensure gas pressure complies with the gas type being installed.
NOTE:- Product images are for illustration purposes only, actual products may differ in appearance.
Errors and omissions excepted (E&OE)
SPECIFICATION
GAS CONSUMPTION (MJ/H)
75
GASTYPE
NG
NUMBER OF BURNERS
3
PACKAGE DIMENSION MM
995(w) x 875(D) x 640(H)
PRODUCT DIMENSION MM
900(w) x 800(D) x 562(H)
PRODUCT WEIGHT
110 Kg
SHIPPING WEIGHT
139 Kg
WARRANTY SELECTTION
2 Years Parts & Labour
Body made from type 304 stainless steel with heavy-duty 16mm hardened A3 hardened cooking plates, the hotplate griddle series is made for restaurants, bistros, take-away shops and catering businesses. Designed with adjustable feet for easy bench-top placement and features a removable drip tray and splashback. This piece of kitchen equipment comes with flame-out protection valves with independent controls for easy use, maintenance and cleaning.
Compatible with either natural gas or LPG, this hotplate is certified by IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515.
NOTE: SOLD SEPARATELY: 900mm stainless steel stand, SKU: BASE900
When you buy from AG Equipment, you know you’re getting a twenty-four-month parts and labour warranty from a trusted Australian supplier.
Construction
- Grill plate is a 16mm A3 steel plate and the body is made of 304 materials.- Working area (mm): 888(w) x 515(d)- Three high-efficiency stainless steel tubular burners (75 Mj output)- Splashback- Removable drip tray- Adjustable feet- SOLD SEPARATELY: Stainless steel base, SKU: BASE900
Operation
- Liquefied Propane Gas (gas tanks)- ¾ inch pipe gas inlet- Controls and valves with flame-out protection- Piezoelectric Ceramic Ignition device- Independent burner controls
Safety
- IAPMO OCEANA gas certified to AS 4563-2004, Certification No. GMK10515- Flame-out safety valve
Installation and Maintenance
Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation by your local council code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly.Read the product manual thoroughly before installing and operating the unit to ensure correct instructions are followed.Check and ensure the gas regulator is set to Natural Gas or LPG as per requirement.Check and ensure gas pressure complies with the gas type being installed.
NOTE:- Product images are for illustration purposes only, actual products may differ in appearance.
Errors and omissions excepted (E&OE)
SPECIFICATION
GAS CONSUMPTION (MJ/H)
75
GASTYPE
LPG
NUMBER OF BURNERS
3
PACKAGE DIMENSION MM
995(w) x 875(D) x 640(H)
PRODUCT DIMENSION MM
900(w) x 800(D) x 562(H)
PRODUCT WEIGHT
110 Kg
SHIPPING WEIGHT
139 Kg
WARRANTY SELECTTION
2 Years Parts & Labour
Features: Two operational modes: 1) 7 simmer or 10 cook settings with or without timer feature. The timer can be set for up to 12 hours. Temperature can operate up to 200°C in this mode. 2) Temperature probe mode, where the user sets the desired temperature. Then the probe inserted into the pan regulates power to the machine to keep contents at the specified temperature. The temperature control range in this mode operates in 1°C increments from 40-99°C. Highly reliable circuit board, designed to operate continuously for up to 12 hours Aerogel insulation to protect internal machine components Simple clean design Portable unit enabling flexible set-up and easy storage LED display Automatic over-temperature shut-off Automatic pan sensing technology Cleanable air intake filter below Standard 10 Amp plug Rear vented air discharge, 100 mm clearance required This product uses a 10A plugProduct Dimensions: 365(W) X 455(D) X 115(H)mm
The GasMax QR-24ELPG is an LPG gas char grill top that delivers high-output, even chargrilling from a compact benchtop footprint, built for continuous commercial service.Why operators choose the QR-24ELPG
Four heavy-duty 21.08MJ burners — 78MJ/h total output for fast searing and quick heat recovery across the whole grill.
Independent burner control — four control knobs let you run different heat zones for proteins and vegetables at once.
Auto ignition & flame failure shut-off — fast, safe lighting with automatic gas cut-off if a flame goes out.
Stainless steel construction with drip tray — corrosion-resistant body and removable tray for easy clean-down.
Adjustable feet — 45mm height adjustment to level the unit on any bench.
Specifications
Brand
GasMax
Model / MPN
QR-24ELPG
Type
Gas Char Grill Top
Fuel
LPG
Burners
4 x 21.08MJ
Total gas output
78MJ/h
Gas inlet
3/4"
Ignition
Auto ignition with flame failure shut-off
Construction
Stainless steel
Feet
Adjustable, 45mm height adjustment
Product dimensions
610(W) x 770(D) x 460(H)mm
Packed dimensions
740(W) x 900(D) x 650(H)mm
Net weight
95 kg
Country of manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only with Product Registration
Venue suitability: A strong fit for cafes, pubs, burger bars, steakhouses and catering kitchens that need reliable benchtop chargrilling without committing floor space to a full range.Browse more options in our Chargrills range or see the full GasMAX cooking line-up to match this unit with a compatible stand.Installation & delivery: Supplied for LPG; connect via the 3/4" gas inlet by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsWhat fuel does the QR-24ELPG use? It runs on LPG (bottled gas) and connects through a 3/4" gas inlet.How many burners does it have? Four heavy-duty 21.08MJ burners, each with its own control knob, for a combined output of 78MJ/h.What are the dimensions? The unit measures 610(W) x 770(D) x 460(H)mm and weighs 95 kg net.Does it have safety shut-off? Yes — it features auto ignition with flame failure shut-off that cuts the gas if a flame is extinguished.What warranty applies? 2 Years Parts & Labour, plus an additional 2 Years Parts Only when the product is registered.
The GasMax QR-24E is a natural gas char grill top that delivers intense, even radiant heat for searing steaks, burgers and seafood in a busy commercial kitchen. Its four independently controlled burners and stainless steel construction make it a hard-wearing benchtop griller for high-volume service. Why operators choose the QR-24E
Four heavy-duty 21.08 MJ/h burners — independent control of each zone for searing and holding at the same time.
88 MJ/h total gas input — fast heat-up and quick recovery between batches during peak service.
Auto ignition & flame-failure shut-off — instant lighting and an automatic gas cut-off if a burner goes out.
Stainless steel construction with drip tray — corrosion-resistant body and an easy-clean removable drip tray.
Sturdy adjustable feet — 45 mm height adjustment to level the unit on any bench. Specifications
Brand
GasMax
Model / MPN
QR-24E
Type
Char Grill Top
Fuel
Natural Gas
Burners
4 x 21.08 MJ/h
Total Gas Input
88 MJ/h
Gas Inlet
3/4"
Ignition
Auto ignition with flame-failure shut-off
Construction
Stainless Steel
Feet
Adjustable, 45 mm height adjustment
Product Dimensions
609(W) x 824(D) x 460(H)mm
Packed Dimensions
740(W) x 900(D) x 650(H)mm
Net Weight
95 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only with product registration
Venue suitability: A benchtop char grill top suited to cafes, pubs, burger bars, food trucks and restaurant cooklines that need a chargrilled finish without committing bench space to a full-size unit. Pair it with other gas cooking gear from our Chargrills range or browse the full GasMAX line-up to match your cookline. Installation & delivery: Supplied as a natural gas unit; installation and gas connection must be carried out by a licensed gasfitter. Dispatched Australia-wide. Frequently asked questions What fuel does the QR-24E use? It is configured for natural gas. The matching LPG model and conversion kit are not available in New Zealand. How many burners does it have? Four heavy-duty burners rated at 21.08 MJ/h each, for a total gas input of 88 MJ/h, each controlled independently. What are its dimensions? 609 mm wide x 824 mm deep x 460 mm high, with a net weight of 95 kg. Does it have safety features? Yes — auto ignition for fast lighting and a flame-failure device that shuts off the gas if a burner is extinguished. What warranty is included? 2 years parts and labour, plus a further 2 years parts only when the product is registered within 14 days of invoice.
The ConvectMax YXD-266E is an electric basket rotisserie that roasts 8–12 birds across 4 rotating baskets, built for delis, charcoal-chicken shops, supermarkets and busy café kitchens. It runs on a single-phase 240V; 4.8kW; 20A supply with a 0–300°C temperature range, combining radiant and convection heat for even browning. A stainless steel housing, front and back toughened glass and an 80W rotation motor keep it durable and easy to load through high-volume service. Why operators choose the YXD-266E
8–12 bird capacity across 4 baskets — turns out large batches of rotisserie chicken to match peak lunch and dinner demand.
240V; 4.8kW; 20A single-phase — plugs into standard commercial power without a three-phase upgrade.
Radiant and convection heating — circulates heat for even colour and consistent cook results basket to basket.
0–300°C temperature range — covers slow roasting through to fast, high-heat finishing.
Stainless steel housing — wipes down fast and stands up to daily commercial cleaning.
Front and back toughened glass with rubber seal — keeps heat inside the chamber for energy savings and gives staff and customers a clear view of the product.
80W rotation motor with on/off switch — dedicated motor control plus a separate chamber-light switch for simple operation.
Oil collector and swivel castors — catches drippings at the base and lets staff reposition the unit for cleaning. Specifications
Brand
ConvectMax
Model / MPN
YXD-266E
SKU
YXD-266E
Type
Electric Basket Rotisserie
Capacity
8–12 birds, 4 baskets
Heating
Radiant / convection
Temperature range
0–300°C
Power supply
240V
Power rating
4.8kW
Current
20A
Rotation motor
80W
Dimensions (W×D×H)
800 × 630 × 610mm
Packed dimensions (W×D×H)
850 × 680 × 660mm
Weight
67kg
Housing material
Stainless steel
Door
Front and back toughened glass
Country of manufacture
China
Warranty
1 Year Parts and Labour
Venue suitability The YXD-266E suits charcoal-chicken shops, delis, supermarket hot-food sections and cafés that sell rotisserie chicken as a daily line, where the 8–12 bird capacity keeps a steady supply ready. Its compact 800mm-wide footprint and single-phase power make it practical for venues without three-phase, and the glass front doubles as a merchandising display. It is less suited to very high-volume QSR chains that need continuous, multi-rack throughput. Compare it against the rest of our commercial ovens range or browse the full ConvectMax lineup to match the right roasting capacity to your venue. Installation & delivery The YXD-266E connects to a standard single-phase 240V; 4.8kW; 20A supply, so no gas or three-phase work is required; allow clearance around the unit for airflow and cleaning, and have it positioned by your team using the swivel castors. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. It is backed by a 1 Year Parts and Labour warranty. Frequently asked questions How many chickens does the YXD-266E hold?It holds 8–12 birds across 4 rotating baskets, depending on bird size, making it suited to delis, charcoal-chicken shops and supermarket hot-food sections running daily rotisserie service. What power supply does it need?It runs on single-phase 240V; 4.8kW; 20A, so it connects to standard commercial power without a three-phase upgrade. Confirm your circuit can carry the 20A load before installation. What temperature range does it reach?The chamber operates from 0–300°C using combined radiant and convection heat, covering slow roasting through to high-heat finishing for even browning across all four baskets. What are its dimensions and weight?The unit measures 800 × 630 × 610mm (W×D×H) and weighs 67kg, with a compact 800mm width that fits tighter benches and back-of-house spaces. See our commercial kitchen equipment list for fit-out planning. How do I keep it clean?The stainless steel housing wipes down easily and an oil collector at the base catches drippings during service. Empty the collector daily and clean the glass and chamber regularly; our oven cleaning and maintenance guide covers best practice. What warranty does it come with?The YXD-266E is covered by a 1 Year Parts and Labour warranty. Manufactured in China and supplied with a stainless steel housing for durable commercial use.
The ConvectMax YXD-8A-3E is a heavy-duty bench-top convection oven built for cafes, restaurants and catering kitchens that need fast, even baking without a dedicated power upgrade. It runs on a standard 240V/15A plug-in supply, draws 3.5kW and reaches 300°C, with two reversing fans circulating heat across three 600×400mm tray levels. A stainless steel body, double-toughened front glass and steam function make it a versatile, all-day workhorse for baking, roasting and reheating.
Why operators choose the YXD-8A-3E
240V/15A plug-in power — connects to a standard 15A outlet, so you avoid the cost and lead time of a hardwired three-phase install.
Two reversing fans — circulate heat in both directions for even bakes across every tray, eliminating hot spots and rotation.
50°C–300°C range — covers low-temperature holding through to high-heat roasting and baking from one unit.
3 × 600×400mm trays included — ready to run on the standard tray footprint, with 80mm between levels.
Integrated steam function — adds moisture for crustier breads and juicier roasts without a separate combi oven.
Stainless steel build with 5-sided insulation — durable, wipe-clean construction that keeps surrounding cabinetry cooler and reduces heat loss.
360°C hi-limiter and chamber light — built-in safety cut-out plus a lit cavity so staff can check progress without opening the door.
120-minute timer with bell — reliable timed cooking that frees staff for other tasks during service.
Specifications
Brand
ConvectMax
Model / MPN
YXD-8A-3E
SKU
YXD-8A-3E
Type
Bench-top convection oven
Power
240V; 3.5kW; 15A (plug-in)
Temperature range
50°C – 300°C
Trays included
3 × 600×400mm
Tray level spacing
80mm
External dimensions (W×D×H)
834 × 765 × 500mm
Internal dimensions (W×D×H)
700 × 460 × 288mm
Packed dimensions (W×D×H)
950 × 990 × 700mm
Packed weight
86kg
Net weight
70kg
Material
Stainless steel
Fans
2 reversing fans
Functions
Convection bake, steam function, chamber light, 120-minute timer with bell
Safety
360°C hi-limiter, double-toughened front glass, 5-sided insulation
Warranty
12 months parts and labour
Venue suitability
The compact 834mm-wide footprint and 15A plug-in supply suit cafes, bakeries, function venues and mid-volume restaurant kitchens where bench space and power capacity are limited. Three 600×400mm tray levels and the steam function make it well suited to batch baking pastries, roasting trays of vegetables and reheating prepped meals. For high-throughput production bakeries running continuous loads all day, a larger floor-standing or three-phase oven will be the better long-term fit.
Compare it with other models in our bench-top convection ovens range, or browse the full ConvectMax collection for matching units.
Installation & delivery
The YXD-8A-3E connects to a standard 240V 15A power outlet, so no three-phase wiring is required — just confirm a dedicated 15A circuit is available and leave clearance around the unit for ventilation. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. It is backed by a 12-month parts and labour warranty.
Frequently asked questions
What power supply does the ConvectMax YXD-8A-3E need?It runs on a standard 240V single-phase supply rated at 15A, drawing 3.5kW. You will need a dedicated 15A outlet, but no three-phase or hardwired installation is required.
How many trays does it hold and what size are they?It comes with three 600×400mm trays, with 80mm of spacing between each level. The internal cavity measures 700 × 460 × 288mm.
What temperature range does it reach?The oven operates from 50°C to 300°C, covering everything from low-temperature holding to high-heat roasting and baking. A 360°C hi-limiter provides an automatic safety cut-out.
Does it have a steam function?Yes. The built-in steam function adds moisture during cooking for crustier breads and juicier roasts, so you get some combi-style results without a separate combi oven. For more on getting the most from a unit like this, see our guide to bench-top oven efficiency.
How big is the oven and will it fit on a bench?External dimensions are 834mm wide, 765mm deep and 500mm high, with a net weight of 70kg. The compact footprint suits most commercial benches, provided you allow clearance for ventilation.
How do I keep it performing well?Wipe the stainless steel cavity and rounded corners after each service and clean the glass and tray supports regularly. Our commercial oven maintenance guide explains a simple routine to extend its working life.
The Tecnodom TDE-4CD/15 is an electric convection oven from the Nerone EKO Digital range, holding four 435 x 350mm trays in a stainless steel cooking chamber with a digital control panel.
Why operators choose this oven
Even results across four trays — a double-fan system with 84mm tray spacing circulates heat for consistent browning and bakes.
Digital precision — double display, a 60-minute or infinite timer and memory for nine recipes make service repeatable.
Built for busy kitchens — stainless steel chamber with rounded corners, tempered low-e glass and a high-resistance hinge wipe down fast and stand up to daily use.
Operator-safe — the fans stop the moment the door opens, with internal halogen lighting and an IPX3-rated build.
Plug-and-go power — runs on a 240V single-phase supply at 2.35kW, so it fits a standard 15A outlet.
Specifications
Brand
Tecnodom
Model / MPN
TDE-4CD/15
Type
Convection Oven
Power Type
Electric
Power
2.35kW
Voltage
240V
Amperage
15A
Capacity
4 x 435 x 350mm trays
Included accessories
1 solid tray + 3 wire racks
Tray spacing
84mm
Temperature Range
50°C – 280°C
External Dimensions
589W x 680D x 580H mm
Internal Dimensions
464 x 420 x 370mm
Material
Stainless Steel
Net Weight
33kg
Warranty
1 Year Parts & Labour
Venue suitability: A compact four-tray footprint suits cafes, bakeries, delis, pubs and catering kitchens that need reliable convection baking without a three-phase supply. It pairs well with the rest of our bench-top convection ovens when you are matching output to bench space.
Installation & delivery: Runs on a standard 240V 15A single-phase outlet — no special wiring required. Dispatched Australia-wide.
Frequently asked questions
How many trays does the Tecnodom TDE-4CD/15 hold? It holds four 435 x 350mm trays, supplied as one solid tray and three wire racks.
What power supply does it need? It runs on 240V single-phase at 2.35kW, drawing up to 15A, so it connects to a standard 15A outlet.
What temperature range does it reach? The digital control sets temperatures from 50°C to 280°C.
Is the cooking chamber stainless steel? Yes — the chamber is stainless steel with rounded corners for easy cleaning, behind tempered low-e glass.
What warranty is included? The oven comes with a 1 year parts and labour warranty.
The Tecnodom TDE-4CD is a benchtop electric convection oven that holds four 435 x 350 mm trays and circulates heat with a twin-fan system for even, fast cooking across every shelf. It belongs to the Nerone EKO digital range, built for cafes, bakeries and busy commercial kitchens.
Why operators choose the TDE-4CD
Twin-fan convection — double fans move air around all four trays for consistent browning top to bottom.
Digital control with recipe memory — a double display and memory for 9 recipes make repeat batches quick and repeatable.
Stainless cooking chamber — rounded-corner stainless interior with tempered low-e glass is easy to wipe down and maintain.
Wash-down rated — built to IPX3 norms with an interlocking gasket and high-resistance hinge for a long service life.
Safe, simple operation — fans stop when the door opens, internal halogen lighting and non-slip feet keep day-to-day use easy.
Specifications
Brand
Tecnodom
Model / MPN
TDE-4CD
Type
Convection Oven
Tray capacity
4 x 435 x 350 mm
Included accessories
1 solid tray + 3 wire racks
Tray spacing
84 mm
Temperature range
50–280°C
Power type
Electric
Power
240V, 2.35 kW, 10 A
Control
Digital, double display, memory for 9 recipes, 60-minute or infinite timer
Construction
Stainless steel chamber with rounded corners, tempered low-e glass door
Protection rating
IPX3
External dimensions
589W x 680D x 580H mm
Internal dimensions
464 x 420 x 370mm
Packed dimensions
720 x 625 x 750 mm
Net weight
33 kg
Warranty
1 Year Parts & Labour
Venue suitability: Ideal for cafes, bakeries, patisseries and front-of-house counters that need reliable batch baking and reheating from a compact benchtop footprint. Browse more options in our Convection Ovens range to compare tray counts and sizes.
Installation & delivery: Runs on a standard 240V single-phase 10 A supply — no special connection required. Dispatched Australia-wide.
Frequently asked questions
How many trays does the TDE-4CD hold? It holds four 435 x 350 mm trays with 84 mm spacing between each shelf.
What temperature range does it reach? The oven operates from 50°C up to 280°C.
What power supply does it need? It runs on 240V single-phase at 2.35 kW, drawing up to 10 A.
Does it have a digital controller? Yes — a digital control panel with a double display and memory for 9 recipes, plus a 60-minute or infinite timer.
What warranty is included? The TDE-4CD comes with a 1 Year Parts & Labour warranty.
The ConvectMax YXD-6A/15 is a benchtop electric convection oven that bakes, roasts and grills across four GN 1/1 trays for cafes, bakeries and bistro kitchens needing even, fan-forced results without a three-phase connection.Why operators choose the YXD-6A/15
Single-phase 15A power — runs from a standard 15-amp point, no three-phase install required.
4 x GN 1/1 capacity — four full-size trays in a compact benchtop footprint.
Ceramic-coated cavity — wipes clean fast and resists baked-on residue.
Cook & hold with twin timers — 60-minute bake reminder plus 180-minute cook timer for hands-off service.
Top and bottom elements with grilling — even browning and a dedicated grill function in one unit.
Specifications
Brand
ConvectMax
Model / MPN
YXD-6A/15
Type
Electric Convection Oven
Capacity
4 x GN 1/1
Power
3.5 kW; 15 A
Temperature range
Up to 270°C
Construction
Stainless Steel
Cavity
Ceramic-coated
Controls
3 knobs (temperature, bake timer, cook & hold)
Internal dimensions
550 x 418 x 431mm
External dimensions
798(W) x 670(D) x 580(H)mm
Packed dimensions
850(W) x 750(D) x 650(H)mm
Net weight
44 kg
Warranty
1 Year Parts & Labour
Country of manufacture
China
Venue suitability: Ideal for cafes, bakeries, patisseries, pubs and small commercial kitchens that need reliable fan-forced baking and roasting from a single-phase benchtop unit.It sits alongside the rest of our convection ovens, and you can browse the full ConvectMax range for matching stands and larger models.Installation & delivery: Plugs into a standard 15-amp single-phase point - no three-phase wiring needed. Dispatched Australia-wide.Frequently asked questionsHow many trays does the YXD-6A/15 hold? It takes four GN 1/1 trays on its runners.What power supply does it need? A single-phase 15-amp power point; it draws 3.5 kW.What temperature does it reach? The oven operates up to 270°C.Is the cavity easy to clean? Yes - the cavity is ceramic-coated to resist baked-on residue and wipe down quickly.What warranty is included? It comes with a 1 Year Parts & Labour warranty.
The ConvectMax YXD-6A is a benchtop electric convection oven that bakes, roasts and grills across four GN 1/1 trays in a single stainless steel chamber — built for cafes, bakeries and small commercial kitchens that need consistent fan-forced results from a standard 10A power point. Why operators choose the YXD-6A
Four GN 1/1 trays — fan-forced convection for even bakes and roasts across the full chamber.
Up to 270°C with grilling function — top and bottom heating elements cover baking, roasting and grilling in one oven.
Cook & Hold function — finish a service and hold food at temperature without overcooking.
Ceramic-coated cavity and chamber light — easier wipe-down cleaning and a clear view of progress.
Standard 10A connection — runs on a single-phase 240V 10A outlet, no special wiring needed. Specifications
Brand
ConvectMax
Model / MPN
YXD-6A
Type
Electric Convection Oven
Capacity
4 x GN 1/1
Door
1 glass door
Temperature range
Up to 270°C
Power
2.4kW; 240V; 10A single phase
Construction
Stainless steel, ceramic-coated cavity
Functions
Convection bake, grill, cook & hold; 60-min bake timer, 180-min cook timer
Internal dimensions
550 x 418 x 431mm
External dimensions
798(W) x 650(D) x 596(H)mm
Packed dimensions
850(W) x 750(D) x 650(H)mm
Net weight
67kg
Warranty
1 Year Parts and Labour
Venue suitability: A benchtop convection oven suited to cafes, bakeries, patisseries, sandwich bars and pub kitchens that need reliable fan-forced baking and roasting without the footprint or three-phase supply of a full combi. Browse more Convection Ovens or see the full ConvectMax range to match a unit to your service volume. Installation & delivery: Runs on a standard single-phase 240V 10A outlet, so it can be plugged in without dedicated wiring. An optional stand with castors is available separately. Dispatched Australia-wide. Frequently asked questions How many trays does the ConvectMax YXD-6A hold? It holds four GN 1/1 size trays in a single stainless steel chamber. What power supply does the YXD-6A need? It runs on a standard single-phase 240V supply rated at 2.4kW and requires a 10A power point. What temperature does the oven reach? The YXD-6A operates up to 270°C and includes top and bottom elements for baking, roasting and grilling. Does it have a cook and hold function? Yes — a Cook & Hold function lets you hold food at temperature after cooking, along with a 60-minute bake timer and 180-minute cook timer. What warranty does the YXD-6A come with? It is covered by a 1 Year Parts and Labour warranty.
The GasMax RB-1B is a single dual-ring gas burner hob with a built-in faucet, built for high-output stockpot and Asian-style cooking in commercial kitchens.Why operators choose the RB-1B
Dual-ring single burner at 80MJ/h — concentrated high heat for stockpots, woks and fast boil-ups.
Built-in faucet with tall splashback — fill pots in place and keep the back wall clean.
Heavy-duty flat trivet — stable footing for large, heavy pots over long shifts.
Stainless steel construction with S/S drip pans — wipe-clean surfaces that stand up to a busy line.
Piezo ignition and adjustable feet — quick lighting and 45mm height adjustment to level on any floor.
Specifications
Brand
GasMax
Model / MPN
RB-1B
Type
Asian Range / dual-ring gas burner hob
Gas output
80MJ/h
Power type
Natural Gas
Burners
1 (dual-ring), 2 control knobs
Ignition
Piezo
Faucet
Built-in
Material
Stainless steel
External dimensions
463(W) x 676(D) x 780(H)mm
Packed dimensions
580(W) x 770(D) x 590(H)mm
Net weight
37kg
Adjustable feet
45mm height adjustment
Country of manufacture
China
Warranty
2 years parts & labour + 2 years parts only with product registration
Venue suitability: A natural fit for Asian and Indian restaurants, takeaways and caterers that run stockpots, woks and large-volume boil-ups, where the built-in faucet speeds pot filling on a busy line. Browse more options across our Asian Range collection or the full GasMAX range to match it to your cookline.Installation & delivery: Natural gas connection should be carried out by a licensed gasfitter. Dispatched Australia-wide.Frequently asked questionsIs the GasMax RB-1B natural gas or LPG? The RB-1B is the natural gas (NG) model. A separate RB-1BLPG variant is available for LPG.How powerful is the burner? The single dual-ring burner delivers 80MJ/h, suited to high-output stockpot and wok cooking.Does it include a faucet? Yes — a built-in gooseneck faucet is mounted on the tall stainless splashback for filling pots in place.What are the external dimensions? The unit measures 463mm wide, 676mm deep and 780mm high.What warranty does it come with? 2 years parts and labour, plus an additional 2 years parts only when the product is registered within 14 days of invoice.
The GasMax RB-1BLPG is a single dual-ring wok (Asian cooktop) burner with a built-in faucet, designed for high-heat stir-fry and Asian cooking lines that need fast water access at the burner.
Why operators choose the RB-1BLPG
Dual-ring single burner, 78 MJ/h — concentrated high heat for rapid wok cooking.
Built-in faucet with splashback — rinse and top up woks without leaving the station.
Heavy-duty flat trivets — stable footing for round-base and flat woks.
Piezo ignition — quick, reliable lighting with no separate igniter.
Stainless steel construction with adjustable feet — durable, easy to clean and level on uneven floors.
Gas certified — supplied ready for compliant commercial installation.
Specifications
Brand
GasMax
Model / MPN
RB-1BLPG
Type
Wok / Asian Cooktop
Power Type
LPG
Gas Output
78 MJ/h
Burners
1 (dual ring)
Control Knobs
2
Ignition
Piezo
Material
Stainless Steel
Product Dimensions
463(W) x 676(D) x 780(H)mm
Packed Dimensions
580(W) x 770(D) x 590(H)mm
Net Weight
37 kg
Warranty
2 Years Parts and Labour + 2 Years Parts Only for products registered within 14 days of invoice
Venue suitability: Built for Asian restaurants, noodle and stir-fry bars, food-court kitchens and caterers running a dedicated wok station where high heat and on-station water access keep service moving.
Browse more high-output wok ranges in our Asian Range wok burner collection, or see the full GasMAX line-up of commercial gas cooking equipment.
Installation & delivery: This appliance is gas certified and should be installed by a licensed gas fitter to local regulations. LPG configuration as supplied. Dispatched Australia-wide.
Frequently asked questions
What gas does the GasMax RB-1BLPG use? The RB-1BLPG is configured for LPG.
How powerful is the burner? It is a single dual-ring burner rated at 78 MJ/h, suited to high-heat wok cooking.
Does it have a built-in faucet? Yes — it includes a built-in gooseneck faucet with a rear splashback for rinsing and topping up woks at the station.
How is it ignited? The burner uses piezo ignition.
What warranty is included? 2 Years Parts and Labour, plus 2 Years Parts Only for products registered within 14 days of invoice.
Bring the energy-saving efficiency of induction cooking into your pro kitchen with the Apuro freestanding 2 zone induction hob. By combining user-friendly controls with high performance cooking, the hob is a great choice for cooking a huge variety of dishes, all whilst using much less energy in comparison to traditional gas or electric alternatives.As the Apuro hob uses induction technology, much more energy is transferred straight into the cooking, rather than being wasted into the kitchen. Not only does this speed up your service, it also helps to contribute to a cooler kitchen, with less demand on your ventilation too. A great way to reduce your overall running costs whilst keeping a comfortable working environment.The hob is positioned on a handy open base with castors, providing valuable additional storage and making it easy to move around when required. And thanks to the strong stainless steel construction, the whole unit is easy to clean and maintain.A technician is required to set up this machine.
Product features
Dimensions 920(H) x 400(W) x 750(D)mm
Output 17.5Amp
Power Type 300-3500W
Voltage 380-400V
Weight 43.3kg
2x powerful 3.5kW zones suitable for most typical pan sizes
Compatible pan sizes: 120mm - 280mm
Pan detection technology - auto-off when pan removed
No naked flames - reduced risk of burns
Open base provides additional storage space
Durable fitted castors for easy positioning
Highly efficient - reduces running costs and speeds up cooking - up to 70% more efficient than gas hobs
Heavy duty, easy-clean toughened ceramic glass surface
Precision cooking - 11 power levels
Benchstar Automatic Single Pan Fried Dumplings/Buns Machine NPD-1 Multi-Purpose Compact Machine for Versatile Cooking This compact and lightweight machine is designed for various culinary applications, including potstickers, scones, pan-fried steamed buns, and various types of dumplings such as gyoza, mandu, and pierogi. Its corrosion-resistant hard chrome grill plate ensures efficient heat transfer, making it an ideal choice for both professional and home kitchens. Key Features Multi-purpose compact, lightweight machine Suitable for potstickers, scones, Pan-fried Steamed Buns, Pan-fried dumplings, etc. Corrosive-resistant hard chrome grill plate ensures efficient heat transfer Simple design of the top cover Top cover can stop at any position, Easy to clean Digital control panel Programmable setting for more cooking needs such as pan-fried dumplings and steaks High-efficiency low-density heating tube Includes buzzer and light: Indicator to remind user after cooking Takes only 11 minutes to preheat the plate from 30 to 210 °C Cooking temperature: 50~250°C Cooking time (MM: SS): 00:30-30:00 Water feeding time (MM: SS): 00:10~10:00 Feeding water volume up to 950ml Each plate can cook 28 to 33 dumplings Each grill plate size is 31/x204m Plug is 3000W/15amp Additional Information
Simple, Practical Design: The top cover features a minimalist design and can be stopped at any position, allowing for flexible use and easy cleaning.
User-Friendly Controls: Equipped with a digital control panel and programmable settings, this machine can be tailored to a wide range of cooking needs, from pan-fried dumplings to steaks.
Efficient Heating: The high-efficiency low-density heating tube ensures quick and even cooking. . Cooks fresh dumplings in just 3:30 minutes and frozen dumplings in 5:30 minutes. Up to 4 programs can be stored for each cooking side
Precise Cooking: The cooking temperature ranges from 50°C to 250°C, with cooking times adjustable between 00:30 and 30:00 minutes.
Water Feeding System: The machine includes a water feeding feature, with a timer adjustable between 00:10 and 10:00 minutes, and a maximum water volume of 950ml.
High Capacity: Each grill plate can cook between 28 and 33 dumplings (such as gyoza, mandu, or pierogi), making it perfect for high-demand settings.
Convenient Alerts: Includes a buzzer and light indicator to remind the user when cooking is complete. 1 Year Parts & Labour Plus 1 Year Parts Only Warranty When Products Registered Within 14D Of InvoiceProduct Dimensions: 285(W) x 625(D) x 439(H)mmPower: 3000W/15A
Electmax 700 Series Induction 2-Burner Cooker with Splashback EIC7-400P Key Features Stainless steel body and stand Ceramic glass cooktop Touch control/Adjust the power by knob 5000W power each burner Cooking temperature: 60°C to 240°C Extra storage space under the cooktop Electric overheating production Timer range: 0-180min Splashback guard at the back Without plug, hard wiring Optional cabinet door available 2-burner induction cooker with splashback on stand Warranty: 1 Year Parts and Labour + 1 Year Parts Only for Products Registered within 14 Days of InvoicePower: 415; 3~N; 10kW
The Ideal appliance for restaurants and commercial kitchens. Six manually controlled (28Mj) independent burners, this unit gives dependable stove space for when you need to get multiple orders out on time. Easy to use and operate manual flame start operation with safety flame failure. Includes solid cast iron trivets that withstand high demand kitchens. Heavy-duty frame and corrosion-resistant, seam-free 304 stainless steel finish on the front, sides, legs, and splashback, easy to remove drip tray allow for quicker kitchen cleanup.
Fully adjustable screw-on legs & undershelf included ensuring a finely tuned, level cooking surface. Quality 304 stainless steel construction.
Heavy-duty constructed frame & splashback
Heavy-duty burners & standby pilots
Flame failure
Cast iron burners
Constructed in 304 stainless steel
¾ inch pipe gas inlet
4 stainless steel adjustable legs & solid undershelf
Removal front drip tray
Easy manual ignition to all burners
Independent burner controls
Heavy-duty matt black trivets
Corrosion-resistant, easy to maintain & keep clean
Dimensions: 600(W) x 800(D) x 562(H)mmWarranty: 48 Months Parts & 24 Labour
The Ideal appliance for restaurants and commercial kitchens. Six manually controlled (28Mj) independent burners, this unit gives dependable stove space for when you need to get multiple orders out on time. Easy to use and operate manual flame start operation with safety flame failure. Includes solid cast iron trivets that withstand high demand kitchens. Heavy-duty frame and corrosion-resistant, seam-free 304 stainless steel finish on the front, sides, legs, and splashback, easy to remove drip tray allow for quicker kitchen cleanup.
Fully adjustable screw-on legs & undershelf included ensuring a finely tuned, level cooking surface. Quality 304 stainless steel construction.
Heavy-duty constructed frame & splashback
Heavy-duty burners & standby pilots
Flame failure
Cast iron burners
Constructed in 304 stainless steel
¾ inch pipe gas inlet
4 stainless steel adjustable legs & solid undershelf
Removal front drip tray
Easy manual ignition to all burners
Independent burner controls
Heavy-duty matt black trivets
Corrosion-resistant, easy to maintain & keep clean
Dimensions: 600(W) x 800(D) x 562(H)mmWarranty: 48 Months Parts & 24 Labour
The ConvectMax YXD-8AE is a heavy-duty bench-top convection oven that uses press-button steam injection and twin reversing fans to bake, roast and reheat evenly across one stainless chamber, built for cafés, bakeries, bistros and small production kitchens. It holds four 600×400mm trays on 80mm spacing, draws 6.4kW on a single-phase 240V supply and runs a 50–300°C range with a 120-minute timer and bell. A double toughened-glass door, 360°C hi-limiter and fully insulated body make it a robust step up from a domestic oven without committing to a full-size combi.
Why operators choose the YXD-8AE
Press-button steam injection — adds humidity on demand for crustier bread, moister roasts and better reheating from one control.
Twin reversing fans — alternating airflow drives even bakes tray to tray, reducing hot spots across the chamber.
4 trays at 600×400mm on 80mm spacing — standard bakery-tray sizing slots straight into existing prep workflows with clearance for trayed bakes.
50–300°C range with 120-minute timer and bell — covers low-temperature holding through to high-heat roasting with timed, repeatable results.
360°C hi-limiter and double toughened front glass — safe over-temperature cut-out plus a heat-isolating door for a clear view of the bake.
Heavy-duty stainless construction with steel baffle — wipe-down hygiene, rounded cavity corners for easy cleaning and even heat distribution.
Fully insulated on five sides with chamber light — lower heat loss into the kitchen and a clear view of cooking progress.
Compact 834mm-wide footprint — fits bench runs and tight lines where a full-size oven will not.
Specifications
Brand
ConvectMax
Model / MPN
YXD-8AE
SKU
YXD-8AE
Type
Bench-Top Convection Oven (with press-button steam)
Tray capacity
4 × 600×400mm (aluminium trays included)
Tray spacing
80mm
Temperature range
50–300°C
Timer
120 minutes with bell
Safety cut-out
360°C hi-limiter
Fans
2 × reversing fans
Total power
6.4kW
Voltage / current
240V, 27A (hard-wired)
Internal dimensions (W×D×H)
700 × 460 × 360mm
External dimensions (W×D×H)
834 × 765 × 572mm
Packed dimensions (W×D×H)
950 × 990 × 750mm
Net weight
78kg
Packed weight
90kg
Door
Double toughened front glass, latch opens to 90°
Material
Stainless steel with steel baffle and nickel-coated pan supports
Warranty
1 Year Parts and Labour
Venue suitability
The YXD-8AE suits cafés, bakeries, bistros, sandwich bars and small production kitchens that need even baking and steam without the footprint of a full-size combi — the twin reversing fans and press-button steam handle bread, pastries and roasts, while the 834mm-wide body fits compact bench runs. It is a strong choice for venues stepping up from a domestic oven and for menus built around baked and reheated items. It is less suited to high-volume production needing 10- or 20-tray throughput, or to sites without a hard-wired single-phase circuit.
Browse the full range of convection ovens or explore the wider ConvectMax range to match capacity to your menu.
Installation & delivery
The YXD-8AE draws 6.4kW at 240V and 27A, so it must be hard-wired by a licensed electrician — it is not a plug-in unit. Allow clearance around the chamber for airflow and servicing. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by a 1 Year Parts and Labour warranty.
Frequently asked questions
What power supply does the ConvectMax YXD-8AE need?It draws 6.4kW at 240V and 27A, so it must be hard-wired by a licensed electrician rather than plugged into a standard outlet. It is a single-phase unit.
How many trays does the YXD-8AE hold?It takes four 600×400mm trays spaced 80mm apart, and aluminium baking trays are included. The internal chamber measures 700 × 460 × 360mm.
What temperature range does it reach?The oven runs from 50°C to 300°C with a 120-minute timer and bell, plus a 360°C hi-limiter for over-temperature safety cut-out. That covers low-temperature holding through to high-heat roasting.
What does the press-button steam do?It injects humidity into the chamber on demand, helping produce crustier bread, moister roasts and better reheating. Twin reversing fans then drive even airflow tray to tray. For more on getting the most from a bench-top oven, see this bench-top oven efficiency guide.
What are the dimensions and weight?External dimensions are 834mm wide, 765mm deep and 572mm high, and the unit weighs 78kg. Packed for transit it measures 950 × 990 × 750mm at 90kg.
How do I clean and maintain the YXD-8AE?Wipe down the stainless chamber after service — the rounded cavity corners make this quick — and keep fans and seals clear for even baking. Our commercial oven cleaning guide covers a full routine.
What warranty does it carry?The YXD-8AE is covered by a 1 Year Parts and Labour warranty and is supplied as a new unit.
The ConvectMax YXD-8A/15E is a heavy-duty stainless steel bench-top convection oven that bakes, roasts and reheats with two reversing fans and a press-button steam function, built for cafes, bakeries, restaurants and catering kitchens. It runs on a standard 240V 15A single-phase supply (3.3kW), holds 4 x 600x400mm trays on 80mm level spacing, and reaches 50°C to 300°C with a 120-minute bell timer. A stainless baffle and twin fans spread heat evenly across every shelf, while a 360°C hi-limiter and double-toughened front glass keep operation safe and visible. Why operators choose the YXD-8A/15E
Press-button steam function — adds moisture for crusty breads, pastries and reheating without drying product out.
Two reversing fans — even bake and colour across all four shelves, so trays don't need rotating mid-bake.
4 x 600x400mm trays at 80mm spacing — gastronorm-friendly capacity for high-volume cafe and bakery service.
50°C–300°C range with 120-minute bell timer — covers proving, baking and roasting, and signals the end of every cycle.
Stainless steel structure with 5-sided insulation — durable in a hot kitchen and retains heat for efficient running.
Stainless baffle plate — distributes heat more evenly for consistent results tray to tray.
Double-toughened front glass and chamber light — clear view of the bake while isolating heat from the front.
360°C hi-limiter and 90° door latch — safe over-temperature cut-out plus easy full access to the cavity. Specifications
Brand
ConvectMax
Model / MPN
YXD-8A/15E
SKU
YXD-8A/15E
Type
Bench-top convection oven (electric, with steam)
Tray capacity
4 x 600 x 400mm trays (aluminium)
Level spacing
80mm
Temperature range
50°C – 300°C
Timer
120 minutes with bell
Safety cut-out
360°C hi-limiter
Power
240V / 3.3kW / 15A, single phase
Connection
15 Amp
External dimensions
834 (W) x 765 (D) x 572 (H) mm
Internal dimensions
700 (W) x 460 (D) x 360 (H) mm
Packed dimensions
950 (W) x 990 (D) x 750 (H) mm
Packed weight
90 kg
Construction
Stainless steel, 5-sided insulation, stainless baffle
Glass
Double-toughened front glass
Warranty
1 Year Parts and Labour
Venue suitability The YXD-8A/15E suits cafes, bakeries, patisseries, restaurants and catering operations that need reliable batch baking from a compact bench-top footprint. The press-button steam and twin reversing fans make it a strong choice for bread, pastries and roasting where even colour matters, while the standard 15A plug means no three-phase wiring is required. It is less suited to very high-throughput production bakeries that need a full rack or rotary oven, where a floor-standing unit would be the better fit. Browse the full range of bench-top convection ovens or explore more ConvectMax ovens to compare sizes and configurations. Installation & delivery The oven connects to a standard 240V 15A single-phase outlet (3.3kW) with no special wiring required, though a dedicated 15A circuit and adequate rear and side clearance for ventilation are recommended. Dispatched Australia-wide from our Sydney HQ and partner warehouses in Melbourne, Brisbane, Adelaide and Perth. Backed by a 1 Year Parts and Labour warranty. Frequently asked questions What size trays does the ConvectMax YXD-8A/15E take?It holds 4 trays sized 600 x 400mm, set on 80mm level spacing. Aluminium baking trays are included, and an optional wire shelf is available. What is the temperature range of this convection oven?The cooking range is 50°C to 300°C, controlled with a 120-minute timer and bell. A 360°C hi-limiter provides an over-temperature safety cut-out. Does the YXD-8A/15E need three-phase power?No. It runs on a standard 240V single-phase 15A supply drawing 3.3kW, so it plugs into a 15A outlet without three-phase wiring. What does the steam function do?The press-button steam injects moisture into the chamber, which helps develop crust on breads and pastries and keeps reheated food from drying out. For more on getting the most from a compact oven, see our bench-top oven efficiency guide. What are the external dimensions?The oven measures 834mm wide x 765mm deep x 572mm high, with an internal cavity of 700 x 460 x 360mm. Packed for transit it is 950 x 990 x 750mm at 90 kg. How do I keep the oven performing well?Wipe the stainless interior and rounded cavity corners after each service and clean the glass and fans regularly so airflow stays even. Our commercial oven cleaning and maintenance guide covers a full routine. What warranty does it come with?The YXD-8A/15E is covered by a 1 Year Parts and Labour warranty from date of purchase for commercial use.
The GasMax RB-6ELPG is a six-burner LPG benchtop gas cooktop built for high-volume commercial kitchens that need open-flame cooking power in a compact, bench-mounted footprint.Why operators choose this cooktop
Six independent burners — run multiple pots and pans at once for busy service periods
120MJ/h total gas output — high heat for fast searing, boiling and stir-frying
Flame failure protection — gas cuts off automatically if a burner goes out, for safer operation
Piezo ignition — reliable, push-button lighting with no separate igniter needed
Stainless steel construction — corrosion-resistant body, splashback and drip pans wipe down fast
Flat heavy-duty trivets & adjustable feet — stable cookware support and level set-up on any bench
Specifications
Brand
GasMax
Model / MPN
RB-6ELPG
Type
Benchtop gas cooktop
Burners
6
Gas type
LPG
Gas output
120MJ/h
Ignition
Piezo
Safety
Flame failure protection
Regulator size
3/4"
Construction
Stainless steel
Trivets
Flat heavy-duty
Dimensions (W x D x H)
902 x 824 x 575mm
Packed dimensions (W x D x H)
900 x 1020 x 520mm
Warranty
2 years parts & labour + 2 years parts only with product registration
Country of manufacture
China
Venue suitability: Suited to cafes, restaurants, takeaways, food trucks and catering operations running on LPG that need extra burner capacity without a full freestanding range. The benchtop format drops onto an existing stand or stainless bench, making it a practical add-on or primary cooking surface for tight kitchens. Browse more Gas Cooktops or view the full GasMAX range to compare burner counts and sizes.Installation & delivery: Gas connection and commissioning must be carried out by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsWhat gas type does the GasMax RB-6ELPG use? It is configured for LPG (liquefied petroleum gas) and ships with a 3/4" regulator size.How many burners does it have? Six independent burners, each with its own control knob.What is the total gas output? The cooktop has a total rated output of 120MJ/h across all six burners.Does it have flame failure protection? Yes. Each burner has flame failure protection that shuts off the gas supply automatically if the flame is extinguished.What are the dimensions? The cooktop measures 902mm wide x 824mm deep x 575mm high, including the rear splashback.