Commercial Ice Machines

Commercial ice machines for sale, built for the hospitality industry — self contained, under bench, benchtop, modular and ice dispensing. Whether you run a cafe, bar, restaurant, pub, hotel, club or catering operation, ice is a production input like any other: if the machine cannot keep up with your busiest service, everything downstream slows down. This range covers 179 machines and accessories from Scotsman, Hoshizaki, Skope, Blizzard, Bromic and Polar, with delivery Australia-wide.

Who these commercial ice machines are for

A commercial ice machine is rated for continuous duty and specified by daily output in kilograms over 24 hours. That is the key difference from a domestic ice maker: a commercial unit is built to run all day, is plumbed in, and is designed to be serviced. Venues that typically need one include bars and pubs pouring spirits and mixers, cafes running iced coffee through summer, restaurants holding seafood and salad on ice, clubs and function venues with peaked demand, and medical, laboratory and food-processing sites with hygiene requirements.

If you are buying for a smaller site or a back-bar position, start with the benchtop and countertop ice makers. For a machine that lives under a standard bench, see under bench ice makers.

Types of commercial ice machine

Self contained ice makers

A self contained machine has the ice-making head and the storage bin in one cabinet. It is the most common format in Australian hospitality because it is a single delivery, a single install and a single footprint. Output typically runs from around 20 kg to 300 kg per 24 hours. Browse the full range of self contained ice makers.

Under bench ice makers

Under bench (or undercounter) machines are self contained units sized to fit beneath a standard 900 mm bench, which makes them the default choice for back bars and service areas where floor space is the constraint. Height is the specification that matters — measure the gap before you order, and allow clearance for airflow and for the unit to be pulled out for service.

Benchtop and countertop ice makers

Benchtop machines sit on the counter and suit low-volume sites, offices, waiting areas and venues that only need ice for part of the day. They are the lowest-cost entry point into the category and the simplest to install.

Modular ice machines and storage bins

Modular machines are the ice-making head only and sit on top of a separate storage bin, so you size production and storage independently. This is how larger venues scale: one head, a bin sized to the service pattern, and the option to increase either later. See modular ice makers and the matching ice storage bins.

Ice dispensers and ice wells

Dispensers deliver ice on demand without an open bin, which suits self-serve areas and sites with tighter hygiene requirements. Bar ice wells and ice crushers complete a drinks station.

Ice types explained

The ice a machine produces is a real specification, not a detail. Full cube and half dice melt slowly and are the standard for spirits and mixed drinks. Gourmet or top-hat ice is clear and dense, and is chosen where the drink is on display. Flake ice is soft and mouldable, which is why it is used for seafood display, salad bars and food transport. Nugget, cubelet and chewblet ice is chewable and absorbs flavour, and is popular for soft drinks and healthcare. Crescent ice packs tightly and is common in high-volume beverage service. Choose the ice first, then the machine that makes it — not the other way round.

Commercial ice machines by venue type

Bars and pubs generally need cube or crescent ice with enough storage to cover a Friday night without the bin running dry. Cafes running iced coffee and smoothies lean toward nugget or flake. Restaurants holding seafood, oysters or salad on display need flake. Function venues and clubs are the classic case for a modular head on a large bin, because demand is peaked rather than steady. Medical and laboratory sites usually specify flake or nugget with a dispenser for hygiene reasons.

Choosing the right commercial ice machine

1. Size to your busiest day, not your average

Estimate ice per customer for your service style, multiply by covers on your busiest day, then add headroom. Under-sizing is the most common and most expensive mistake in this category, because the fix is a second machine. Note that published output figures are laboratory ratings — real-world production is lower, and falls further as ambient and water temperatures rise.

2. Check water, drainage and ambient temperature before you buy

Nearly all commercial ice machines need a cold water supply and a drain. Air-cooled machines also need clearance around the cabinet and reject heat into the room, which matters in an already-hot kitchen; water-cooled and remote condenser options exist where airflow or heat load is a problem. Australian summer ambient temperatures have a direct effect on output, so specify for your hottest month, not a mild one.

3. Match the ice type and storage to the service pattern

A machine that makes the right ice but stores too little will still fail you at peak. Storage capacity and production rate are separate numbers — check both. If the two do not line up for your venue, that is the point at which a modular head on a larger bin makes more sense than a self contained unit.

Installation, hygiene and water quality in Australia

Ice is a food, and an ice machine is food-contact equipment. Plan for routine cleaning and sanitising in line with the manufacturer's schedule, and treat filtration as part of the specification rather than an accessory — water quality affects both ice clarity and machine life, and scale is the most common cause of premature failure in hard-water areas. Plumbing and drainage work should be carried out by a licensed plumber, and electrical connection by a licensed electrician.

Complete your ice setup

Most sites need more than the machine itself. Pair a modular head with a correctly sized storage bin, add scoops and filtration, and consider whether an ice and water dispenser suits a self-serve area better than an open bin.

Featured commercial ice machines

Popular picks across the range include the Polar C-Series Countertop Ice Machine 15 kg output for compact and low-volume positions, and the Polar Ice Machine 50 kg output where a venue needs more production without moving to a modular head and bin.

Frequently asked questions

How much does a commercial ice machine cost in Australia?

Across the machines and accessories currently in this range, prices run from about $147 for ice-handling accessories to around $24,300 for large-capacity modular systems, with a median of roughly $5,260. Benchtop and small under bench machines sit at the lower end; high-output modular heads, large storage bins and dispensing systems sit at the top. Capacity, ice type, cooling method and brand are the main variables.

Do commercial ice machines need a drain?

Almost all of them do. Ice machines produce meltwater and purge water during the harvest cycle, and that has to go somewhere. Gravity-drained machines need a floor waste or a drain point below the outlet; where that is not available, some machines can be specified with a drain pump to lift water to a higher outlet. Confirm the drain requirement for the specific model before installation, because it determines where the machine can physically go.

Does a commercial ice machine keep the ice frozen?

The storage bin on a commercial ice machine is insulated, not refrigerated, on most self contained and modular units. Ice is held cold by its own mass and will slowly melt, with the meltwater draining away. That is normal and is why bins are sized to a service period rather than to long-term storage. If you need ice held for extended periods, that is a job for a freezer, not an ice machine bin.

What is the difference between self contained, under bench and modular machines?

Self contained describes the technology — the ice head and the storage bin in one cabinet. Under bench and benchtop describe the form factor, meaning where the machine physically fits. Most under bench machines are also self contained. Modular is the alternative technology: the head is bought separately from the bin, so production and storage are sized independently.

Which ice type should I choose?

Match it to what you serve. Cube and half dice for spirits and mixers, gourmet for drinks on display, flake for seafood and salad, nugget or cubelet for soft drinks and healthcare, crescent for high-volume beverage service. The ice type is fixed by the machine, so decide it before shortlisting models.

What size ice machine do I need?

Work from covers on your busiest day rather than an average week, allow for ambient temperature in your hottest month, and check that the storage bin covers your peak service period as well as the daily total. If production and storage requirements pull in different directions, a modular head on a larger bin is usually the answer.

Do you deliver commercial ice machines Australia-wide?

Yes. Delivery is available Australia-wide. Larger modular systems, dispensers and bins ship as freight items, so confirm site access and any lift or stair requirements when ordering.

Buying guidance

If you are unsure between formats, start from the constraint that will not move: the space the machine has to fit into, the water and drain points available, and the ice your drinks or food service actually requires. Those three narrow the field quickly. From there, size to the busiest day and allow headroom for a hot Australian summer. For a fuller walk-through of sizing and specifying, read our commercial ice machine buying guide for Australian venues, or see the breakdown of cube, nugget and flake ice if the ice type is the open question.

  • Sale -26% Scotsman MF 47 AS OX - 265kg - EcoX & XSafe Modular Flake Ice Maker

    ScotsmanScotsman MF 47 AS OX - 265kg - EcoX & XSafe Modular Flake Ice Maker

    Dimensions W: 538mm D: 663mm H: 645mmPacked Weight: 87kg Product Features Head only Ice maker 265kg daily production rate Residual water content 15% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder (evaporator) Hermetic compressor Double protection - electronic rotation sensor & drive coupling Low-water sensor protection Simple, reliable electromechanic control Stainless steel finish, top cover in PS plastic with removable panels External indicator lights to show operation status and maintenance Requires storage bin model NB 193, CBT 22 EFCD (required cover when used with NB 193), NB 393, NB 530, CBT 30 EFSD (required cover when used with NB 393/ NB 530), NB 948, CBT 48 FMCD (required cover when used with NB 948), UBH 1100 Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $10,730.00 $7,940.00 +GSTIncl. GST

  • Sale -26% Scotsman MF 36 AS OX - 193kg - XSafe Modular Flake Ice Maker

    ScotsmanScotsman MF 36 AS OX - 193kg - XSafe Modular Flake Ice Maker

    Dimensions W: 563mm D: 536mm H: 531mmPacked Weight: 56kg Product Features Head only Ice maker 193kg daily production rate Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R134a refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder (evaporator) Hermetic compressor Double protection - electronic rotation sensor & drive coupling Low-water sensor protection Simple, reliable electromechanic control Stainless steel finish, top cover in PS plastic with removable panels External indicator lights to show operation status and maintenance Requires storage bin model NB 193, NB 393, NB 530, CBT 22 EFSD (required cover when used with NB 193), CBT 30 EFSD (required cover when used with NB 393/ NB 530) Includes removable air filter, water & drain hose *Image shown Ice maker with optional storage bin All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,743.00 $5,730.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman MC 2148 MR - 869kg - Modular Dice Ice Maker

    ScotsmanScotsman MC 2148 MR - 869kg - Modular Dice Ice Maker

    Dimensions W: 1219mm D: 610mm H: 737mmPacked Weight: 168kg Product Features Head only Ice maker 893kg daily production rate W 22 x D 22 x H 22 mm, 10g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404a refrigerant gas Vertical evaporator spray-system technology Easy access front condenser air filter One touch button cleaning system Electronic control Water sense adaptive purge control for better water usual control Simple, reliable electromechanic control Resistant stainless steel exterior External indicator lights to show operation status and maintenance Requires storage bin model NB 948, UBH 1100 Includes removable air filter, water & drain hose Optional extras: ECR 611 - remote condensor , RTE 40 - pre-charge tube lines R404A 12m length All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $29,454.00 $22,017.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman MC 1848 MA - 736kg - Modular Dice Ice Maker

    ScotsmanScotsman MC 1848 MA - 736kg - Modular Dice Ice Maker

    Dimensions W: 1219mm D: 610mm H: 737mmPacked Weight: 161kg Product Features Head only Ice maker 866kg daily production rate W 22 x D 22 x H 22 mm, 10g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404a refrigerant gas Vertical evaporator spray-system technology Easy access front condenser air filter One touch button cleaning system Electronic control Water sense adaptive purge control for better water usual control Simple, reliable electromechanic control Resistant stainless steel exterior External indicator lights to show operation status and maintenance Requires storage bin model NB 948, UBH 1100 Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $24,978.00 $18,671.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman MC 1448 MA - 706kg - Modular Dice Ice Maker

    ScotsmanScotsman MC 1448 MA - 706kg - Modular Dice Ice Maker

    Dimensions W: 1219mm D: 610mm H: 737mmPacked Weight: 157kg Product Features Head only Ice maker 706kg daily production rate W 22 x D 22 x H 22 mm, 10g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404a refrigerant gas Vertical evaporator spray-system technology Easy access front condenser air filter One touch button cleaning system Electronic control Water sense adaptive purge control for better water usual control Simple, reliable electromechanic control Resistant stainless steel exterior External indicator lights to show operation status and maintenance Requires storage bin model NB 948, UBH 1100 Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $19,725.00 $14,744.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman HD 30 W- 81kg - Ice Dispenser

    ScotsmanScotsman HD 30 W- 81kg - Ice Dispenser

    Dimensions W: 770mm D: 820mm H: 1351mmPacked Weight: 102kg Product Features Dispensing Units Only 81kg maximum Ice storage capacity A simple 'push button' ice chute activates Ice dispensing mechanism Removable top panel for easy access to bin for routine cleaning Improved drop tray depth to accommodate 5 litre Esky container Polyurethane insulation for improved Preservation of Ice supply for longer periods Stainless steel cabinet Equipped with 3 meter cordset supplied Compatible with NW 457, NW 608 and NW 1008 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $12,381.00 $9,255.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman HD 30 - 81kg - Ice Dispenser

    ScotsmanScotsman HD 30 - 81kg - Ice Dispenser

    Dimensions W: 762mm D: 850mm H: 1351mmPacked Weight: 102kg Product Features Dispensing Units Only 81kg maximum Ice storage capacity Simple 'push' Ice chute activates ice dispensing mechanism Removable top panel for easy access and cleaning Polyurethane insulation for longer periods of Ice supply Stainless steel cabinet Compatible with NW 457, NW 608 and NW 1008 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $11,212.00 $8,381.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman HD 22 - 59kg - Ice Dispenser

    ScotsmanScotsman HD 22 - 59kg - Ice Dispenser

    Dimensions W: 559mm D: 850mm H: 1351mmPacked Weight: 91kg Product Features Dispensing Units Only 59kg maximum Ice storage capacity Simple 'push' Ice chute activates ice dispensing mechanism Removable top panel for easy access and cleaning Polyurethane insulation for longer periods of Ice supply Stainless steel cabinet Compatible with NW 307 and NW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $10,171.00 $7,603.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman ECS 87 AS OX - 39kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECS 87 AS OX - 39kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 531mm D: 600mm H: 825mmPacked Weight: 53kg Product Features 39kg daily production rate 19kg storage bin capacity 21mm dia x H 25 mm, 8g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional Extra: SCK optional castor kit LVR073 Adjustable feet All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $4,711.00 $3,521.00 +GSTIncl. GST

  • Sale -26% Scotsman ECS 226 AS OX - 152kg - XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECS 226 AS OX - 152kg - XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 1078mm D: 719mm H: 1082mmPacked Weight: 112kg Product Features 152kg daily production rate 70kg storage bin capacity 21mm dia x H 25 mm, 8g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R134a refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,124.00 $6,012.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman ECM 177 AS OX - 83kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECM 177 AS OX - 83kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 680mm D: 600mm H: 1079mmPacked Weight: 82kg Product Features 83kg daily production rate 48kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,916.00 $5,170.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman ECM 127 AS OX - 74kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECM 127 AS OX - 74kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 680mm D: 600mm H: 1009mmPacked Weight: 77kg Product Features 74kg daily production rate 39kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,277.00 $4,692.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman ECM 107 AS OX - 51kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECM 107 AS OX - 51kg - EcoX & XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 531mm D: 600mm H: 930mmPacked Weight: 56kg Product Features 51kg daily production rate 23kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional Extra: LVR073 - Adjustable Feet to 850mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $5,061.00 $3,783.00 +GSTIncl. GST

  • Sale -26% Scotsman ECL 86 AS OX - 34kg - XSafe Self Contained Gourmet Ice Maker

    ScotsmanScotsman ECL 86 AS OX - 34kg - XSafe Self Contained Gourmet Ice Maker

    Dimensions W: 531mm D: 600mm H: 825mmPacked Weight: 53kg Product Features 44kg daily production rate 19kg storage bin capacity 38mm dia x H 41mm, 39g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R134a refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional Extra: SCK optional castor kit LVR073 Adjustable feet (Image showing ecs 87 AS OX) All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $4,135.00 $3,060.00 +GSTIncl. GST

  • Sale -26% Scotsman DXG 35 AS - 27kg - Gourmet Ice Dispenser

    ScotsmanScotsman DXG 35 AS - 27kg - Gourmet Ice Dispenser

    Dimensions W: 380mm D: 515mm H: 1696mmPacked Weight: 60kg Product Features 27kg daily production rate 11kg storage bin capacity 30mm dia x H 34mm, 20g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R134a refrigerant gas Horizontal Ice evaporator spray-system technology Push button dispensing system Simple, reliable electromechanic controls Clean alert indicator to clean filter Easy access removeable front condenser air filter Resistant stainless steel exterior External indicator lights to show operation status Includes water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,301.00 $6,883.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman CRUSHMAN 360 - 6kg - Ice Crusher

    ScotsmanScotsman CRUSHMAN 360 - 6kg - Ice Crusher

    Dimensions W: 245mm D: 430mm H: 490mmPacked Weight: 28kg Product Features Ice crusher only 6kg/ min Ice crush rate 3.5kg storage capacity Crushes all types of Ice Stainless steel compact design Safty protection microswitch on top of lid and door All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $4,707.00 $3,518.00 +GSTIncl. GST

  • Sale -26% Scotsman AFC 80 AS OX - 75kg - XSafe Self Contained Nugget & Cubelet Ice Maker

    ScotsmanScotsman AFC 80 AS OX - 75kg - XSafe Self Contained Nugget & Cubelet Ice Maker

    Dimensions W: 535mm D: 620mm H: 890mmPacked Weight: 58kg Product Features 75kg daily production rate 25kg storage bin capacity W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R134a refrigerant gas XSafe - Natural Sanitation System Ice evaporator stainless steel auger Simple, reliable electromechanic controls Built-in storage bin Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,277.00 $5,385.00 +GSTIncl. GST

  • Sale -26% Scotsman AFC 134 AS OX - 125kg - XSafe Self Contained Nugget & Cubelet Ice Maker

    ScotsmanScotsman AFC 134 AS OX - 125kg - XSafe Self Contained Nugget & Cubelet Ice Maker

    Dimensions W: 950mm D: 605mm H: 872mmPacked Weight: 79kg Product Features 135kg daily production rate 44kg storage bin capacity W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404a refrigerant gas XSafe - Natural Sanitation System Ice evaporator stainless steel auger Simple, reliable electromechanic controls Built-in storage bin Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,893.00 $6,581.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman AF 87 AS OX - 68kg - XSafe Self Contained Flake Ice Maker

    ScotsmanScotsman AF 87 AS OX - 68kg - XSafe Self Contained Flake Ice Maker

    Dimensions W: 535mm D: 620mm H: 890mmPacked Weight: 58kg Product Features 68kg daily production rate 25kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R290 refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,785.00 $5,819.00 +GSTIncl. GST

  • Sale -26% Scotsman AF 156 AS OX - 160kg - XSafe Self Contained Flake Ice Maker

    ScotsmanScotsman AF 156 AS OX - 160kg - XSafe Self Contained Flake Ice Maker

    Dimensions W: 950mm D: 605mm H: 1083mmPacked Weight: 88kg Product Features 160kg daily production rate 60kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404A refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,382.00 $6,943.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman AF 127 AS OX - 121kg - XSafe Self Contained Flake Ice Maker

    ScotsmanScotsman AF 127 AS OX - 121kg - XSafe Self Contained Flake Ice Maker

    Dimensions W: 950mm D: 605mm H: 872mmPacked Weight: 77kg Product Features 121kg daily production rate 40kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R404a refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,038.00 $6,756.00 +GSTIncl. GST

  • Sale -25%Last stock! Scotsman AF 107 AS OX - 126kg - XSafe Self Contained Flake Ice Maker

    ScotsmanScotsman AF 107 AS OX - 126kg - XSafe Self Contained Flake Ice Maker

    Dimensions W: 592mm D: 622mm H: 1078mmPacked Weight: 74kg Product Features 126kg daily production rate 30kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R290 refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,754.00 $6,544.00 +GSTIncl. GST

  • Sale -25% Scotsman ACS 87 AS - 39kg - Self Contained Gourmet Ice Maker

    ScotsmanScotsman ACS 87 AS - 39kg - Self Contained Gourmet Ice Maker

    Dimensions W: 531mm D: 600mm H: 875mmPacked Weight: 51kg Product Features 39kg daily production rate 19kg storage bin capacity 21mm dia x H 25mm, 8g Ice cubes Air cooled condensing unit Front panel in and out airflow for built-in installation Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R290 refrigerant gas Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status Removable air filter Includes Ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $4,411.00 $3,297.00 +GSTIncl. GST

  • Sale -25% Scotsman ACM 47 AS - 24kg - Self Contained Gourmet Ice Maker Scotsman ACM 47 AS - 24kg - Self Contained Gourmet Ice Maker

    ScotsmanScotsman ACM 47 AS - 24kg - Self Contained Gourmet Ice Maker

    Dimensions W: 386mm D: 600mm H: 645mmPacked Weight: 42kg Product Features 24kg daily production rate 9kg storage bin capacity 30mm dia x H 34mm, 20g Ice cubes Air cooled condensing unit Front panel in and out airflow for built-in installation Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes R290 refrigerant gas Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status Removable air filter Includes Ice scoop, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $3,014.00 $2,253.00 +GSTIncl. GST

© 2026 Commercial Kitchen Store, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account