Ice & Water Dispenser

20 Litre Insulated Drink Dispenser with Spigot - CPWK020-5 Exterior: 460mmW×300D×500H Interior: 320mmW×200D×320H Made from high quality long-life Food Grade Polyethylene (PE) • Alkaline resistant • shock resistant • Safe use range -40ºC to 80ºC • Easy to clean • Double thickness PE structure filled with Polyurethane Foam • Door gaskets to minimise heat/cold loss • Pressure relief valve for easy opening Our carriers are attractive, durable, practically unbreakable & will leave no taste or odour in foods 12 Months Parts only Warranty Power: All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 245mm D: 430mm H: 490mmPacked Weight: 28kg Product Features Ice crusher only 6kg/ min Ice crush rate 3.5kg storage capacity Crushes all types of Ice Stainless steel compact design Safty protection microswitch on top of lid and door All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 560mm D: 855mm H: 730mmPacked Weight: 70kg Product Features Dispensing Units Only 45kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 307, NW 507, NXW 307 and NXW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SD-130B is a no-touch commercial ice dispenser that stores and hygienically dispenses ice, built for high-traffic bars, hotels and self-serve venues. It holds a 60 kg ice bin, runs on a standard 240 V outlet, and pairs with a separate Blizzard ice machine head (SN-420P, SN-145C or SN-280C) to form a complete ice system. Why operators choose the SD-130B No-touch dispensing - staff and guests take ice without hand contact, improving hygiene and food-safety compliance 60 kg ice bin - buffers a full service of ice for busy bars, cafes and convenience stores 304-grade stainless steel body - corrosion-resistant, hard-wearing and quick to wipe down UV sterilisation module - high-efficiency sanitising helps keep stored ice clean Adjustable feet - level the cabinet on uneven commercial flooring Pairs with a Blizzard ice head - designed to run with the SN-420P, SN-145C or SN-280C machine head (sold separately) Specifications Brand Blizzard Model / MPN SD-130B Type Ice & Water Dispenser Ice bin capacity 60 kg Compatible machine heads SN-420P, SN-145C, SN-280C Body material 304 stainless steel Sterilisation UV module Power 240 V; 210 W; 10 A Power type Electric (single phase) Product dimensions 560(W) x 855(D) x 1360(H) mm Packed dimensions 918(W) x 645(D) x 1410(H) mm Net weight 77 kg Packed weight 205 kg Warranty 2 Years Parts and Labour Venue suitability: The no-touch dispense head and 60 kg bin make the SD-130B a strong fit for self-serve bars, hotels, healthcare and convenience stores where hygiene and steady ice availability matter. It is a storage-and-dispense unit rather than a stand-alone maker, so it suits venues ready to run it with a matched Blizzard ice head. To complete the system, browse our ice & water dispensers and the wider Blizzard ice range to select a compatible machine head. Installation & delivery: Plugs into a standard 240 V 10 A outlet and must be paired with a Blizzard machine head to produce ice. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions Does the SD-130B make its own ice? No. It is a dispenser and storage bin that must be paired with a Blizzard ice machine head - the SN-420P, SN-145C or SN-280C - to produce ice. How much ice does the bin hold? The SD-130B has a 60 kg ice storage bin. What power supply does it need? A standard 240 V 10 A outlet; the dispenser draws 210 W. How does it keep ice hygienic? Ice is dispensed with no hand contact and a built-in UV sterilisation module helps sanitise stored ice. What warranty is included? It comes with a 2 Years Parts and Labour warranty.

Read more less

Dimensions W: 560mm D: 855mm H: 1360mmPacked Weight: 83kg Product Features Dispensing Units Only 60kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 307, NW 507, NXW 307 and NXW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 760mm D: 855mm H: 1360mmPacked Weight: 95kg Product Features Dispensing Units Only 100kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 457, NW 608, NW 1008, NXW 457, NXW 607 and NXW 1007 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

IDEAL FOR A SELF-SERVING ENVIRONMENT The ice/water dispensing system can be used for multiple environments including hospitality, catering, leisure and healthcare. They are compact with reduced space requirements. The portion control can be easily set, making it easy to regulate the consumption of ice among end-users, therefore ideal for a self-serving environment. Premium Cubelet ice. Smooth ice dispense. No ice bridging. Robust and reliable. Sanitary self-service application. Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination. Dispenses ice only, water only or ice and water. Adjustable portion-controlled dispensing. Due to auger system water consumption is equal to ice production. 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil. Production Capacity per 24hours Approx. 60kg @10°C Air temp; 10°C Water Approx .50kg @ 21°C Air temp; 15°C Water Approx. 38kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 1.9kg Dimensions 350mm (W) x 585mm (D) x 695mm (H) Cooling Air Weight Net/Gross (kg) 47 / 56 AC Supply Voltage 1 PHASE 220 – 240V 50Hz/10 Amp Plug Amperage Rated:1.5 A Starting: 9.5 A Refrigerant Charge R134a Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6% Product Dimensions: 350(W) x 585(D) x 695(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 427mm D: 552mm H: 619mmPacked Weight: 56kg Product Features 61kg daily production rate 5kg storage bin capacity W 16mm x 15mm dia x H 7 - 8mm, 1g Ice cube Compact countertop ice and water dispenser Touch screen control with touch-free or button activated Programable dosage, ice or water dispensing or both Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Compact countertop Ice and water dispenser Ice evaporator with stainless steel auger High grade stainless steel panels External indicator lights Fast friendly cleaning mode Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

IDEAL FOR A SELF-SERVING ENVIRONMENT The ice/water dispensing system can be used for multiple environments including hospitality, catering, leisure and healthcare. They are compact with reduced space requirements. The portion control can be easily set, making it easy to regulate the consumption of ice among end-users. Premium Cubelet ice Smooth ice dispense No ice bridging Robust and reliable Sanitary self-service application Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination Dispenses ice only. water only or ice and water Adjustable portion controlled dispensing Due to Auger system water consumption is equal to ice production. 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water Max Storage Capacity Approx. 4kg Dimensions 350mm (W) x 585mm (D) x 815mm (H) Cooling Air Weight Net/Gross (kg) 57 / 66 AC Supply Voltage 1 PHASE 220 – 240 / 50Hz / 10 AMP Plug Amperage Rated:2.8 / 2.7 A Starting: 12.6 A Refrigerant Charge R134a Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6% Product Dimensions: 350(W) x 585(D) x 815(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 559mm D: 850mm H: 1351mmPacked Weight: 91kg Product Features Dispensing Units Only 59kg maximum Ice storage capacity Simple 'push' Ice chute activates ice dispensing mechanism Removable top panel for easy access and cleaning Polyurethane insulation for longer periods of Ice supply Stainless steel cabinet Compatible with NW 307 and NW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 427mm D: 552mm H: 769mmPacked Weight: 56kg Product Features 125kg daily production rate 7kg storage bin capacity W 16mm x 15mm dia x H 7 - 8mm, 1g Ice cube Compact countertop ice and water dispenser Touch screen control with touch-free or button activated Programable dosage, ice or water dispensing or both Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Compact countertop Ice and water dispenser Ice evaporator with stainless steel auger High grade stainless steel panels External indicator lights Fast friendly cleaning mode Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 380mm D: 576mm H: 1696mmPacked Weight: 61kg Product Features 27kg daily production rate 11kg storage bin capacity 30mm dia x H 34mm, 20g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Horizontal Ice evaporator spray-system technology Push button dispensing system Simple, reliable electromechanic controls Clean alert indicator to clean filter Easy access removeable front condenser air filter Resistant stainless steel exterior External indicator lights to show operation status Includes water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 762mm D: 850mm H: 1351mmPacked Weight: 102kg Product Features Dispensing Units Only 81kg maximum Ice storage capacity Simple 'push' Ice chute activates ice dispensing mechanism Removable top panel for easy access and cleaning Polyurethane insulation for longer periods of Ice supply Stainless steel cabinet Compatible with NW 457, NW 608 and NW 1008 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

Dimensions W: 770mm D: 820mm H: 1351mmPacked Weight: 102kg Product Features Dispensing Units Only 81kg maximum Ice storage capacity A simple 'push button' ice chute activates Ice dispensing mechanism Removable top panel for easy access to bin for routine cleaning Improved drop tray depth to accommodate 5 litre Esky container Polyurethane insulation for improved Preservation of Ice supply for longer periods Stainless steel cabinet Equipped with 3 meter cordset supplied Compatible with NW 457, NW 608 and NW 1008 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

USER-FRIENDLY PUSH TO DISPENSE The Hoshizaki DB-200H H20 Minesite Crescent dispenser has a storage capacity of 85 kg and dispenses at 5kg per minute. Built with Hoshizaki’s unique ice production system inside, crescent ice is formed and kept in an enclosed bin that prevents cross-contamination. Produce more quality ice. Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks. Use less energy. Cycle 1/2 as many times as competition. Cubes do not clump together in storage bins. Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators. Long life stainless steel construction. Inbuilt, removable, easily cleaned, reusable air filters. Compatible Modular Head unit KMD-201AB, KMD-270AB orKM-660MAJ-E & Top Kit (Sold Separately) Push Button Single Auger Agitator Max Storage Capacity Approx. 91kg Dimensions 765mm (W) x 726mm (D) x 1346mm (H) Production Select Modular Head unit KMD-201AA,KMD-270AA or KM-660MAJ-E & Top Kit (SoldSeparately) Capacity Volume 5.72 ft³ Weight Net/Gross (kg) 85 AC Supply Voltage 1 PHASE 240V/ 50Hz/ 10 AMP Plug Amperage Rated: 1.4A Dispensing Rate 5.89 kg Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V Product Dimensions: 765(W) x 726(D) x 1346(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

USER-FRIENDLY PUSH TO DISPENSE The Hoshizaki DB-200H H20 Minesite Crescent dispenser has a storage capacity of 85 kg and dispenses at 5kg per minute. Built with Hoshizaki’s unique ice production system inside, crescent ice is formed and kept in an enclosed bin that prevents cross-contamination. Produce more quality ice. Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks. Use less energy. Cycle 1/2 as many times as competition. Cubes do not clump together in storage bins. Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators. Long life stainless steel construction. Inbuilt, removable, easily cleaned, reusable air filters. *Ice Machine not included Push Button 2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator Max Storage Capacity Approx. 91kg Dimensions 765mm (W) x 726mm (D) x 1346mm (H) Production Select Modular Head unit KMD-201AA,KMD-270AA or KM-660MAJ-E & Top Kit (SoldSeparately) Capacity Volume 5.72 ft³ Weight Net/Gross (kg) 85 AC Supply Voltage 1 PHASE 240V/ 50Hz/ 10 AMP Plug Amperage Rated: 1.4A Dispensing Rate 5.89 kg Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V Product Dimensions: 765(W) x 726(D) x 1346(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less