Commercial ice machines for sale, built for the hospitality industry — self contained, under bench, benchtop, modular and ice dispensing. Whether you run a cafe, bar, restaurant, pub, hotel, club or catering operation, ice is a production input like any other: if the machine cannot keep up with your busiest service, everything downstream slows down. This range covers 179 machines and accessories from Scotsman, Hoshizaki, Skope, Blizzard, Bromic and Polar, with delivery Australia-wide.
Who these commercial ice machines are for
A commercial ice machine is rated for continuous duty and specified by daily output in kilograms over 24 hours. That is the key difference from a domestic ice maker: a commercial unit is built to run all day, is plumbed in, and is designed to be serviced. Venues that typically need one include bars and pubs pouring spirits and mixers, cafes running iced coffee through summer, restaurants holding seafood and salad on ice, clubs and function venues with peaked demand, and medical, laboratory and food-processing sites with hygiene requirements.
A self contained machine has the ice-making head and the storage bin in one cabinet. It is the most common format in Australian hospitality because it is a single delivery, a single install and a single footprint. Output typically runs from around 20 kg to 300 kg per 24 hours. Browse the full range of self contained ice makers.
Under bench ice makers
Under bench (or undercounter) machines are self contained units sized to fit beneath a standard 900 mm bench, which makes them the default choice for back bars and service areas where floor space is the constraint. Height is the specification that matters — measure the gap before you order, and allow clearance for airflow and for the unit to be pulled out for service.
Benchtop and countertop ice makers
Benchtop machines sit on the counter and suit low-volume sites, offices, waiting areas and venues that only need ice for part of the day. They are the lowest-cost entry point into the category and the simplest to install.
Modular ice machines and storage bins
Modular machines are the ice-making head only and sit on top of a separate storage bin, so you size production and storage independently. This is how larger venues scale: one head, a bin sized to the service pattern, and the option to increase either later. See modular ice makers and the matching ice storage bins.
Ice dispensers and ice wells
Dispensers deliver ice on demand without an open bin, which suits self-serve areas and sites with tighter hygiene requirements. Bar ice wells and ice crushers complete a drinks station.
Ice types explained
The ice a machine produces is a real specification, not a detail. Full cube and half dice melt slowly and are the standard for spirits and mixed drinks. Gourmet or top-hat ice is clear and dense, and is chosen where the drink is on display. Flake ice is soft and mouldable, which is why it is used for seafood display, salad bars and food transport. Nugget, cubelet and chewblet ice is chewable and absorbs flavour, and is popular for soft drinks and healthcare. Crescent ice packs tightly and is common in high-volume beverage service. Choose the ice first, then the machine that makes it — not the other way round.
Commercial ice machines by venue type
Bars and pubs generally need cube or crescent ice with enough storage to cover a Friday night without the bin running dry. Cafes running iced coffee and smoothies lean toward nugget or flake. Restaurants holding seafood, oysters or salad on display need flake. Function venues and clubs are the classic case for a modular head on a large bin, because demand is peaked rather than steady. Medical and laboratory sites usually specify flake or nugget with a dispenser for hygiene reasons.
Choosing the right commercial ice machine
1. Size to your busiest day, not your average
Estimate ice per customer for your service style, multiply by covers on your busiest day, then add headroom. Under-sizing is the most common and most expensive mistake in this category, because the fix is a second machine. Note that published output figures are laboratory ratings — real-world production is lower, and falls further as ambient and water temperatures rise.
2. Check water, drainage and ambient temperature before you buy
Nearly all commercial ice machines need a cold water supply and a drain. Air-cooled machines also need clearance around the cabinet and reject heat into the room, which matters in an already-hot kitchen; water-cooled and remote condenser options exist where airflow or heat load is a problem. Australian summer ambient temperatures have a direct effect on output, so specify for your hottest month, not a mild one.
3. Match the ice type and storage to the service pattern
A machine that makes the right ice but stores too little will still fail you at peak. Storage capacity and production rate are separate numbers — check both. If the two do not line up for your venue, that is the point at which a modular head on a larger bin makes more sense than a self contained unit.
Installation, hygiene and water quality in Australia
Ice is a food, and an ice machine is food-contact equipment. Plan for routine cleaning and sanitising in line with the manufacturer's schedule, and treat filtration as part of the specification rather than an accessory — water quality affects both ice clarity and machine life, and scale is the most common cause of premature failure in hard-water areas. Plumbing and drainage work should be carried out by a licensed plumber, and electrical connection by a licensed electrician.
Complete your ice setup
Most sites need more than the machine itself. Pair a modular head with a correctly sized storage bin, add scoops and filtration, and consider whether an ice and water dispenser suits a self-serve area better than an open bin.
How much does a commercial ice machine cost in Australia?
Across the machines and accessories currently in this range, prices run from about $147 for ice-handling accessories to around $24,300 for large-capacity modular systems, with a median of roughly $5,260. Benchtop and small under bench machines sit at the lower end; high-output modular heads, large storage bins and dispensing systems sit at the top. Capacity, ice type, cooling method and brand are the main variables.
Do commercial ice machines need a drain?
Almost all of them do. Ice machines produce meltwater and purge water during the harvest cycle, and that has to go somewhere. Gravity-drained machines need a floor waste or a drain point below the outlet; where that is not available, some machines can be specified with a drain pump to lift water to a higher outlet. Confirm the drain requirement for the specific model before installation, because it determines where the machine can physically go.
Does a commercial ice machine keep the ice frozen?
The storage bin on a commercial ice machine is insulated, not refrigerated, on most self contained and modular units. Ice is held cold by its own mass and will slowly melt, with the meltwater draining away. That is normal and is why bins are sized to a service period rather than to long-term storage. If you need ice held for extended periods, that is a job for a freezer, not an ice machine bin.
What is the difference between self contained, under bench and modular machines?
Self contained describes the technology — the ice head and the storage bin in one cabinet. Under bench and benchtop describe the form factor, meaning where the machine physically fits. Most under bench machines are also self contained. Modular is the alternative technology: the head is bought separately from the bin, so production and storage are sized independently.
Which ice type should I choose?
Match it to what you serve. Cube and half dice for spirits and mixers, gourmet for drinks on display, flake for seafood and salad, nugget or cubelet for soft drinks and healthcare, crescent for high-volume beverage service. The ice type is fixed by the machine, so decide it before shortlisting models.
What size ice machine do I need?
Work from covers on your busiest day rather than an average week, allow for ambient temperature in your hottest month, and check that the storage bin covers your peak service period as well as the daily total. If production and storage requirements pull in different directions, a modular head on a larger bin is usually the answer.
Do you deliver commercial ice machines Australia-wide?
Yes. Delivery is available Australia-wide. Larger modular systems, dispensers and bins ship as freight items, so confirm site access and any lift or stair requirements when ordering.
Buying guidance
If you are unsure between formats, start from the constraint that will not move: the space the machine has to fit into, the water and drain points available, and the ice your drinks or food service actually requires. Those three narrow the field quickly. From there, size to the busiest day and allow headroom for a hot Australian summer. For a fuller walk-through of sizing and specifying, read our commercial ice machine buying guide for Australian venues, or see the breakdown of cube, nugget and flake ice if the ice type is the open question.
Dimensions
W: 1064mm D: 697mm H: 860mmPacked Weight: 198kg
Product Features
Head only Ice maker
1070kg daily production rate
Residual water content 15%
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R452a refrigerant gas
XSafe - Natural Sanitation System
Stainless steel auger and freezing cylinder (evaporator)
Hermetic compressor
Double protection - electronic rotation sensor & drive coupling
Low-water sensor protection
Simple, reliable electromechanic control
Stainless steel finish, top cover in PS plastic with removable panels
External indicator lights to show operation status and maintenance
Requires storage bin model UBH 1100, UBH1600, SIS700, SIS1350
Includes removable air filter, water & drain hose
*Image shown Ice maker with optional storage bin
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 560mm D: 615mm H: 600mmPacked Weight: 66kg
Product Features
Head only Ice maker
270kg daily production rate
Produces very dry flake ice - water content 12%
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Core ice system - stable Axial load evaporator system
Highly balanced augur double fly system core evaporator
High tech water sump with easy regulation system
Ice level sensor for seamless operations
Smart touch display with with bluetooth and cloud connectivity
XWave app with improved electronics and programming
Stainless steel finish with removable air grid
Requires storage bin model NB 193, NB 393, NB 530, CBT 30 52 AMCD cover (required cover when used NB 393/ NB 530)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 650mm D: 690mm H: 1003mmPacked Weight: 77kg
Product Features
125kg daily production rate
37kg storage bin capacity
W 22mm x D 22mm x H 22mm, 10g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front in and out air flow designed for placement in tight spaces
Ergonomic access to ice with sliding disappearing door
One touch cleaning for time and labour saving
Built-in storage bin
One touch button for easy cleaning
Easy access front condenser air filter for easy clean
Resistant stainless steel exterior
External indicator lights to show operation status and maintenance alert
Includes removable air filter, ice scoop, water and drain hose
Optional extras: SC8700000200 - Optional leg kit (NU 100/ NU 150/ NU 220 models)
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 765mm D: 640mm H: 780mmPacked Weight: 113kg
Product Features
Head only Ice maker
470kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used with NB 948), UBH 1100
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Scotsman IB 140, supplied by Moffat, is a 140 kg ice storage bin (bin only) built for pubs, clubs, hotels and restaurants that need a large reserve of ice on hand. It has a stainless steel exterior, high-density insulation for slower ice melting, a soft-close door for easy ice taking and an internal ice scoop holder, and measures 560 x 860 x 1180 mm (W x D x H) at 33 kg.Why operators choose the IB 140
Storage bin only — pairs with the ice machine you choose — no ice-making head is included
140 kg ice storage capacity — a deep reserve of ice ready for peak trade
Soft-close door — convenient, easy ice taking without the door slamming
Stainless steel exterior — a hard-wearing finish that wipes clean behind the bar or in the back of house
High-density insulation — slows ice melting so stored ice lasts longer
Internal ice scoop holder included — keeps the scoop in its place inside the bin
Adjustable legs — level the bin on uneven floors
Specifications
Brand
Scotsman
Model / MPN
IB 140
Type
Ice storage bin (bin only)
Storage capacity
140 kg
Dimensions
560 x 860 x 1180 mm (W x D x H)
Net weight
33 kg
Exterior
Stainless steel
Door
Soft close
Insulation
High density
Included
Internal ice scoop holder
Legs
Adjustable
Supplied by
Moffat
Warranty
24 Months
Venue suitability: The IB 140 suits cafés, bars, restaurants and smaller pubs that need a steady ice reserve without giving up much floor space — its 560 mm width fits narrow back-of-house spots. Venues going through large volumes of ice on busy nights may need a larger bin.Compare more ice tubs and storage bins or browse the full Scotsman range.Installation & delivery: stand the bin on a level floor and set the adjustable legs to level it. Dispatched Australia-wide with a 24-month warranty — see our warranty information.Frequently asked questionsHow much ice does the Scotsman IB 140 hold?The Scotsman IB 140 ice storage bin holds up to 140 kg of ice.What are the dimensions of the Scotsman IB 140?The Scotsman IB 140 measures 560 x 860 x 1180 mm (W x D x H) and weighs 33 kg.Does the Scotsman IB 140 include an ice machine?No. The Scotsman IB 140 is a storage bin only; the ice machine is purchased separately.How does the Scotsman IB 140 keep ice from melting?The IB 140 uses high-density insulation for slower ice melting, behind a stainless steel exterior and a soft-close door.What warranty comes with the Scotsman IB 140?The Scotsman IB 140 carries a 24-month warranty.
Dimensions W: 485mm D: 575mm H: 908mmPacked Weight: 55kg Product Features 40kg daily production rate 17kg storage bin capacity 30mm dia x H 30mm, 25g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional adjustable feet available All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Scotsman IB 350, supplied by Moffat, is a 350 kg ice storage bin built for pubs, clubs, hotels and restaurants that need a large reserve of ice on hand. It has a stainless steel exterior, high-density insulation for slower ice melting, a soft-close door for easy ice taking and an internal ice scoop holder, and measures 1227 x 973 x 1245 mm (W x D x H) at 76 kg.Why operators choose the IB 350
350 kg ice storage capacity — a deep reserve of ice ready for peak trade
Soft-close door — convenient, easy ice taking without the door slamming
Stainless steel exterior — a hard-wearing finish that wipes clean behind the bar or in the back of house
High-density insulation — slows ice melting so stored ice lasts longer
Internal ice scoop holder included — keeps the scoop in its place inside the bin
Adjustable legs — level the bin on uneven floors
Specifications
Brand
Scotsman
Model / MPN
IB 350
Type
Ice storage bin
Storage capacity
350 kg
Dimensions
1227 x 973 x 1245 mm (W x D x H)
Net weight
76 kg
Exterior
Stainless steel
Door
Soft close
Insulation
High density
Included
Internal ice scoop holder
Legs
Adjustable
Supplied by
Moffat
Warranty
24 Months
Venue suitability: The IB 350 suits high-volume pubs, clubs, hotels, function centres and events where 350 kg of stored ice covers bar service and busy weekends between production runs. At 1227 mm wide it needs a dedicated spot in the back of house or cellar; smaller bars will be better served by a lower-capacity bin.Compare more ice tubs and storage bins or browse the full Scotsman range.Installation & delivery: stand the bin on a level floor and set the adjustable legs to level it. Dispatched Australia-wide with a 24-month warranty — see our warranty information.Frequently asked questionsHow much ice does the Scotsman IB 350 hold?The Scotsman IB 350 ice storage bin holds up to 350 kg of ice.What are the dimensions of the Scotsman IB 350?The Scotsman IB 350 measures 1227 x 973 x 1245 mm (W x D x H) and weighs 76 kg.How does the Scotsman IB 350 keep ice from melting?The IB 350 uses high-density insulation for slower ice melting, behind a stainless steel exterior and a soft-close door.What warranty comes with the Scotsman IB 350?The Scotsman IB 350 carries a 24-month warranty.
Blizzard Premium Under-Counter Ice Maker Large Cube Ice – SN-200P
Designed for high-end hospitality environments, our spray-type under-counter ice maker produces crystal-clear, slow-melting large cube ice (48×48×58mm) – the benchmark for whiskey service in bars, hotels, cafés, and clubs
Key Features
Produces solid, crystal-clear ice cubes (48×48×58mm) with a core temperature of -17° —perfect for premium beverages like whiskey and cocktails
Ensures consistent ice formation at -25°C evaporation temperature, delivering dense, crystal-clear cubes suitable for tropicalized environments and reliable performance in ambient temperatures up to +43°C
Natural and eco-friendly refrigerant
Integrated intelligent control system automates ice production, harvesting, cleaning, and fault detection for effortless operation
Exterior and interior made from SS304 stainless steel and ABS for strength and corrosion resistance
Seamless PE-molded ice bin with rounded corners for easy cleaning and hygiene compliance
Simplified access to the filter, water trough, and distribution tube allows fast servicing and lowers maintenance costs
Add cleaning liquid to the water trough and activate the automatic cleaning cycle, which will be completed in just 35 minutes
Optimised for space-saving installation in bars, cafés, clubs, and kitchens with limited space.
2 Years Parts and Labour Warranty All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The AG Equipment ICE55 is a self-contained undercounter ice maker that produces a steady supply of clean cube ice for bars, cafes, restaurants and food-service venues, with a built-in 18 kg storage bin.
Why operators choose the ICE55
55 kg/24hr output — keeps service stations stocked through busy trade.
18 kg insulated bin — on-board buffer so ice is ready when you need it.
Stainless steel body — durable and easy to wipe down for daily hygiene.
Air-cooled R290 system — efficient operation with adjustable ice thickness.
Undercounter footprint — slots into a 530 mm-wide bench run with adjustable feet.
Specifications
Brand
AG Equipment
Model / MPN
ICE55
Type
Self Contained Ice Maker
Ice type
Cube ice
Ice output
55 kg / 24 hr
Storage bin
18 kg
Cooling
Air-cooled
Refrigerant
R290 / 95 g
Voltage
220–240V, 50Hz
Input power
460 W
Energy consumption
9.2 kWh/24h
Ambient temperature
38°C
Material
Stainless Steel
Product dimensions
530(W) x 570(D) x 830(H)mm
Packaged dimensions
600(W) x 635(D) x 875(H)mm
Net weight
45 kg
Shipping weight
50 kg
Warranty
12 months parts & labour
Venue suitability: Sized for bars, cafes, restaurants and food-service businesses that need a reliable on-bench supply of cube ice without a separate ice store. As a compact self-contained unit it suits sites where bench space is tight but consistent daily ice volume matters.
Browse more options in our Self Contained Ice Makers collection, or see the full range from AG Equipment.
Installation & delivery: Requires a water connection and at least 15 cm of clearance around the unit for ventilation; a water filtration system is recommended and the filter and ventilation grills should be cleaned monthly. Dispatched Australia-wide.
Frequently asked questions
How much ice does the ICE55 produce? Up to 55 kg of cube ice per 24 hours.
How much ice can it store? It has an 18 kg insulated storage bin built in.
What type of ice does it make? Cube ice, with adjustable ice thickness.
Is it air-cooled or water-cooled? Air-cooled, using R290 refrigerant.
What warranty does it come with? 12 months parts & labour.
Dimensions
W: 1524mm D: 1125mm H: 1731mmPacked Weight: 230kg
Product Features
Storage bins only
812kg maximum Ice storage capacity
Upright front bins
Pre-cut top pane to accommodate multiple head units
High density polyethylene insulation
Easy clean with removable gaskets
Convenient multi-positioned Ice deflector, preventing Ice spills
Stainless steel bin exterior with front window view
Ice chute cut-out require upon installation
Includes Ice paddle, water & drain hose
Compatible with C 2148 ice maker head unit
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 1220mm D: 1128mm H: 1427mmPacked Weight: 169kg
Product Features
Storage bins only
553kg maximum Ice storage capacity
Upright front bins
Pre-cut top pane to accommodate multiple head units
High density polyethylene insulation
Easy clean with removable gaskets
Convenient multi-positioned Ice deflector, preventing Ice spills
Stainless steel bin exterior with front window view
Ice chute cut-out require upon installation
Single spring loaded bin door for safe usage and tight seal of storage compartment
Includes Ice paddle, water & drain hose
Compatible with C 1448, C 1848, NW 1008, NW 1408 , MFN 56, MF 59, MF 66, MF 69, MAR 76, MAR 79, MAR 106 ice maker head units
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 885mm D: 1267mm H: 1803mmPacked Weight: 198kg
Product Features
Storage bins only
318kg + 73kg Ice cart maximum Ice storage capacity
Upright front bin
Includes 1 x 73kg Ice cart
Pre-cut top panel to accommodate multiple head units
First in first out concept
High density polyethylene insulation
Insulated top closed with lid on storage
Spring loaded storage compartment bin door
Pre-assembled heavy-duty fram with built-in drain for bin and cart (reversible)
Stainless steel bin exterior for both storage and frame
Ice chute cut-out require upon installation
Includes Ice paddle, water & drain hose
Compatible with MFN 46, MFN 56, MF 47, MF 56, MF 58, MF 59, MAR 76, MAR 79, MAR 106, ice maker head units
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 1748mm D: 1267mm H: 1803mmPacked Weight: 390kg
Product Features
Storage bins only
613kg + 73kg + 73kg Ice cart maximum Ice storage capacity
Upright front bin
Includes 2 x 73kg Ice cart
Pre-cut top panel to accommodate multiple head units
First in first out concept
High density polyethylene insulation
Insulated top closed with lid on storage
Spring loaded storage compartment bin door
Pre-assembled heavy-duty fram with built-in drain for bin and cart (reversible)
Stainless steel bin exterior for both storage and frame
Ice chute cut-out require upon installation
Includes Ice paddle, water & drain hose
Compatible with MXG 437, MXG 638, MF 66, MF 69, MAR 76, MAR 79, MAR 106, ice maker head units
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 769mm D: 849mm H: 800mmPacked Weight: 50kg
Product Features
Storage bins only
123kg maximum Ice storage capacity
Slope front bins
High density polyethylene insulation
Easy clean with removable gaskets
Convenient built-in scoop holder
Stainless steel bin exterior with rotocast plastic hinged door
Includes Ice scoop, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 560mm D: 610mm H: 662mmPacked Weight: 77kg
Product Features
Head only Ice maker
194kg daily production rate
W 29mm x D 22mm x H 28mm, 15g Ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R452a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 193, NB 393 with CBT 30 -52 AMCD cover (required cover when used NB 393), NB 530 with CBT 30-52 AMCD cover (required cover when used NB 393)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 1000mmPacked Weight: 145kg
Product Features
Head only Ice maker
600kg daily production rate
W 28mm x D 22mm x H 28mm, 15g Ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R404a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used NB 948), UBH 1100
Includes removable air filter, water & drain hose
*Image shown Ice maker with optional storage bin, Bin is sold separately
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
6 Monthly Maintenance Program
Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
Sanitise water reservoir, distribution tubes, and bin interior.
Clean and flush condenser coils (air-cooled units).
Inspect condenser fan motor and blades.
Check inlet water valve, float, and filters for correct operation.
Verify ice thickness probe or sensor calibration.
Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary.
Test compressor amperage and general performance.
Inspect water pump operation and clean pump housing.
Check harvest cycle operation (heater or hot gas valve).
Inspect electrical connections, relays, and contactors.
Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 800mmPacked Weight: 122kg
Product Features
Head only Ice maker
456kg daily production rate
W 29mm x D 22mm x H 29mm, 15g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R404a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 393, NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used NB 948), UBH 1100
Includes removable air filter, water & drain hose
Optional extras: KSC 1000 - stacking kit for NW 1008
*Image shown Ice maker with optional storage bin
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 575mmPacked Weight: 92kg
Product Features
Head only Ice maker
290kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R404a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 393, NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used NB 948)
Includes removable air filter, water & drain hose
Optional extras: KSC 400-800 - stacking kit for NW 457/ NW 608
*Image shown Ice maker with optional storage bin
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 560mm D: 610mm H: 609mmPacked Weight: 77kg
Product Features
Head only Ice maker
192kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with NB 393), NB 530 with CBT 30 52 AMCD cover
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 575mmPacked Weight: 87kg
Product Features
Head only Ice maker
208kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 393, NB 530
Includes removable air filter, water & drain hose
Optional extras: KSC 400-800 - stacking kit for NW 457/ NW 608
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 560mm D: 610mm H: 662mmPacked Weight: 63kg
Product Features
Head only Ice maker
164kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with NB 393)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 1000mmPacked Weight: 145kg
Product Features
Head only Ice maker
650kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R404a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used NB 948), UBH 1100
Includes removable air filter, water & drain hose
*Image shown Ice maker with optional storage bin
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 760mm D: 620mm H: 800mmPacked Weight: 122kg
Product Features
Head only Ice maker
456kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
R404a refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model NB 393, NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used NB 948), UBH 1100
Includes removable air filter, water & drain hose
Optional extras: KSC 1000 - stacking kit for NW 1008
*Image shown Ice maker with optional storage bin
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.