Commercial Ice Machines

Commercial ice machines for sale, built for the hospitality industry — self contained, under bench, benchtop, modular and ice dispensing. Whether you run a cafe, bar, restaurant, pub, hotel, club or catering operation, ice is a production input like any other: if the machine cannot keep up with your busiest service, everything downstream slows down. This range covers 179 machines and accessories from Scotsman, Hoshizaki, Skope, Blizzard, Bromic and Polar, with delivery Australia-wide.

Who these commercial ice machines are for

A commercial ice machine is rated for continuous duty and specified by daily output in kilograms over 24 hours. That is the key difference from a domestic ice maker: a commercial unit is built to run all day, is plumbed in, and is designed to be serviced. Venues that typically need one include bars and pubs pouring spirits and mixers, cafes running iced coffee through summer, restaurants holding seafood and salad on ice, clubs and function venues with peaked demand, and medical, laboratory and food-processing sites with hygiene requirements.

If you are buying for a smaller site or a back-bar position, start with the benchtop and countertop ice makers. For a machine that lives under a standard bench, see under bench ice makers.

Types of commercial ice machine

Self contained ice makers

A self contained machine has the ice-making head and the storage bin in one cabinet. It is the most common format in Australian hospitality because it is a single delivery, a single install and a single footprint. Output typically runs from around 20 kg to 300 kg per 24 hours. Browse the full range of self contained ice makers.

Under bench ice makers

Under bench (or undercounter) machines are self contained units sized to fit beneath a standard 900 mm bench, which makes them the default choice for back bars and service areas where floor space is the constraint. Height is the specification that matters — measure the gap before you order, and allow clearance for airflow and for the unit to be pulled out for service.

Benchtop and countertop ice makers

Benchtop machines sit on the counter and suit low-volume sites, offices, waiting areas and venues that only need ice for part of the day. They are the lowest-cost entry point into the category and the simplest to install.

Modular ice machines and storage bins

Modular machines are the ice-making head only and sit on top of a separate storage bin, so you size production and storage independently. This is how larger venues scale: one head, a bin sized to the service pattern, and the option to increase either later. See modular ice makers and the matching ice storage bins.

Ice dispensers and ice wells

Dispensers deliver ice on demand without an open bin, which suits self-serve areas and sites with tighter hygiene requirements. Bar ice wells and ice crushers complete a drinks station.

Ice types explained

The ice a machine produces is a real specification, not a detail. Full cube and half dice melt slowly and are the standard for spirits and mixed drinks. Gourmet or top-hat ice is clear and dense, and is chosen where the drink is on display. Flake ice is soft and mouldable, which is why it is used for seafood display, salad bars and food transport. Nugget, cubelet and chewblet ice is chewable and absorbs flavour, and is popular for soft drinks and healthcare. Crescent ice packs tightly and is common in high-volume beverage service. Choose the ice first, then the machine that makes it — not the other way round.

Commercial ice machines by venue type

Bars and pubs generally need cube or crescent ice with enough storage to cover a Friday night without the bin running dry. Cafes running iced coffee and smoothies lean toward nugget or flake. Restaurants holding seafood, oysters or salad on display need flake. Function venues and clubs are the classic case for a modular head on a large bin, because demand is peaked rather than steady. Medical and laboratory sites usually specify flake or nugget with a dispenser for hygiene reasons.

Choosing the right commercial ice machine

1. Size to your busiest day, not your average

Estimate ice per customer for your service style, multiply by covers on your busiest day, then add headroom. Under-sizing is the most common and most expensive mistake in this category, because the fix is a second machine. Note that published output figures are laboratory ratings — real-world production is lower, and falls further as ambient and water temperatures rise.

2. Check water, drainage and ambient temperature before you buy

Nearly all commercial ice machines need a cold water supply and a drain. Air-cooled machines also need clearance around the cabinet and reject heat into the room, which matters in an already-hot kitchen; water-cooled and remote condenser options exist where airflow or heat load is a problem. Australian summer ambient temperatures have a direct effect on output, so specify for your hottest month, not a mild one.

3. Match the ice type and storage to the service pattern

A machine that makes the right ice but stores too little will still fail you at peak. Storage capacity and production rate are separate numbers — check both. If the two do not line up for your venue, that is the point at which a modular head on a larger bin makes more sense than a self contained unit.

Installation, hygiene and water quality in Australia

Ice is a food, and an ice machine is food-contact equipment. Plan for routine cleaning and sanitising in line with the manufacturer's schedule, and treat filtration as part of the specification rather than an accessory — water quality affects both ice clarity and machine life, and scale is the most common cause of premature failure in hard-water areas. Plumbing and drainage work should be carried out by a licensed plumber, and electrical connection by a licensed electrician.

Complete your ice setup

Most sites need more than the machine itself. Pair a modular head with a correctly sized storage bin, add scoops and filtration, and consider whether an ice and water dispenser suits a self-serve area better than an open bin.

Featured commercial ice machines

Popular picks across the range include the Polar C-Series Countertop Ice Machine 15 kg output for compact and low-volume positions, and the Polar Ice Machine 50 kg output where a venue needs more production without moving to a modular head and bin.

Frequently asked questions

How much does a commercial ice machine cost in Australia?

Across the machines and accessories currently in this range, prices run from about $147 for ice-handling accessories to around $24,300 for large-capacity modular systems, with a median of roughly $5,260. Benchtop and small under bench machines sit at the lower end; high-output modular heads, large storage bins and dispensing systems sit at the top. Capacity, ice type, cooling method and brand are the main variables.

Do commercial ice machines need a drain?

Almost all of them do. Ice machines produce meltwater and purge water during the harvest cycle, and that has to go somewhere. Gravity-drained machines need a floor waste or a drain point below the outlet; where that is not available, some machines can be specified with a drain pump to lift water to a higher outlet. Confirm the drain requirement for the specific model before installation, because it determines where the machine can physically go.

Does a commercial ice machine keep the ice frozen?

The storage bin on a commercial ice machine is insulated, not refrigerated, on most self contained and modular units. Ice is held cold by its own mass and will slowly melt, with the meltwater draining away. That is normal and is why bins are sized to a service period rather than to long-term storage. If you need ice held for extended periods, that is a job for a freezer, not an ice machine bin.

What is the difference between self contained, under bench and modular machines?

Self contained describes the technology — the ice head and the storage bin in one cabinet. Under bench and benchtop describe the form factor, meaning where the machine physically fits. Most under bench machines are also self contained. Modular is the alternative technology: the head is bought separately from the bin, so production and storage are sized independently.

Which ice type should I choose?

Match it to what you serve. Cube and half dice for spirits and mixers, gourmet for drinks on display, flake for seafood and salad, nugget or cubelet for soft drinks and healthcare, crescent for high-volume beverage service. The ice type is fixed by the machine, so decide it before shortlisting models.

What size ice machine do I need?

Work from covers on your busiest day rather than an average week, allow for ambient temperature in your hottest month, and check that the storage bin covers your peak service period as well as the daily total. If production and storage requirements pull in different directions, a modular head on a larger bin is usually the answer.

Do you deliver commercial ice machines Australia-wide?

Yes. Delivery is available Australia-wide. Larger modular systems, dispensers and bins ship as freight items, so confirm site access and any lift or stair requirements when ordering.

Buying guidance

If you are unsure between formats, start from the constraint that will not move: the space the machine has to fit into, the water and drain points available, and the ice your drinks or food service actually requires. Those three narrow the field quickly. From there, size to the busiest day and allow headroom for a hot Australian summer. For a fuller walk-through of sizing and specifying, read our commercial ice machine buying guide for Australian venues, or see the breakdown of cube, nugget and flake ice if the ice type is the open question.

  • Sale -26% Scotsman DXG 37 AS - 27kg - Gourmet Ice Dispenser - DXG_37_AS_OX_RCLOSEUP_AN Scotsman DXG 37 AS - 27kg - Gourmet Ice Dispenser - DXG_37_AS_OX_RFH_AN

    ScotsmanScotsman DXG 37 AS - 27kg - Gourmet Ice Dispenser

    Dimensions W: 380mm D: 576mm H: 1696mmPacked Weight: 61kg Product Features 27kg daily production rate 11kg storage bin capacity 30mm dia x H 34mm, 20g Ice cube Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Horizontal Ice evaporator spray-system technology Push button dispensing system Simple, reliable electromechanic controls Clean alert indicator to clean filter Easy access removeable front condenser air filter Resistant stainless steel exterior External indicator lights to show operation status Includes water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $10,918.00 $8,079.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW 457 AS OX - 190kg - Modular Dice Ice Maker - NXW_457_AS_OX_RCLOSEUP_AN Scotsman NXW 457 AS OX - 190kg - Modular Dice Ice Maker - NXW_457_AS_OX_RFH_AN

    ScotsmanScotsman NXW 457 AS OX - 190kg - Modular Dice Ice Maker

    Dimensions W: 767mm D: 636mm H: 600mmPacked Weight: 85kg Product Features Head only Ice maker 190kg daily production rate W 22mm x D 22mm x H 22mm, 10g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with NB 393, NB 530) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,014.00 $5,190.00 +GSTIncl. GST

  • Sale -26% Scotsman NXWH 307 AS OX - 140kg - Modular Dice Ice Maker - NXW_307_AS_OX_RCLOSEUP_AN Scotsman NXWH 307 AS OX - 140kg - Modular Dice Ice Maker - NXW_307_AS_OX_RFH_AN

    ScotsmanScotsman NXWH 307 AS OX - 140kg - Modular Dice Ice Maker

    Dimensions W: 565mm D: 640mm H: 635mmPacked Weight: 72kg Product Features Head only Ice maker 140kg daily production rate W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model SB 293, NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,041.00 $4,470.00 +GSTIncl. GST

  • Sale -26% Scotsman ECM 207 AS OX - 150kg - Self Contained Gourmet Ice Maker - ECM_207_AS_OX_RCLOSEUP_AN Scotsman ECM 207 AS OX - 150kg - Self Contained Gourmet Ice Maker - ECM_207_AS_OX_RFH_AN

    ScotsmanScotsman ECM 207 AS OX - 150kg - Self Contained Gourmet Ice Maker

    Dimensions W: 1250mm D: 622mm H: 809mmPacked Weight: 97kg Product Features 150kg daily production rate 50kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,599.00 $6,363.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW 707 AS OX - 296kg - Modular Dice Ice Maker - NXW_707_AS_OX_RCLOSEUP_AN Scotsman NXW 707 AS OX - 296kg - Modular Dice Ice Maker - NXW_707_AS_OX_RFH_AN

    ScotsmanScotsman NXW 707 AS OX - 296kg - Modular Dice Ice Maker

    Dimensions W: 565mm D: 640mm H: 683mmPacked Weight: 86kg Product Features Head only Ice maker 296kg daily production rate W 22mm x D 22mm x H 22mm, 10g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model SB 293, NB 193, NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393, NB 530) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,064.00 $6,707.00 +GSTIncl. GST

  • Sale -26% Scotsman NU 157 AS OX - 75kg - Self Contained Dice Ice Maker

    ScotsmanScotsman NU 157 AS OX - 75kg - Self Contained Dice Ice Maker

    Dimensions W: 600mm D: 610mm H: 770mmPacked Weight: 65kg Product Features 75kg daily production rate 20kg storage bin capacity W 22mm x D 22mm x H 22mm, 10g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $5,018.00 $3,713.00 +GSTIncl. GST

  • Sale -26% Scotsman MXG M 637 AS OX - 275kg - Modular Gourmet Ice Maker - MXG_637_AS_OX_RCLOSEUP_AN Scotsman MXG M 637 AS OX - 275kg - Modular Gourmet Ice Maker - MXG_637_AS_OX_RFH_AN

    ScotsmanScotsman MXG M 637 AS OX - 275kg - Modular Gourmet Ice Maker

    Dimensions W: 773mm D: 704mm H: 1128mmPacked Weight: 129kg Product Features Head only Ice maker 275kg daily production rate 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Clean alert indicator to clean filter Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status Requires storage bin model NB 393, NB 530 Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $12,522.00 $9,266.00 +GSTIncl. GST

  • Sale -26% Moffat IB 200 - 200kg - Ice Storage Bin - IB_200_FR_AU Moffat IB 200 - 200kg - Ice Storage Bin - IB_200_FR_AU

    ScotsmanMoffat IB 200 - 200kg - Ice Storage Bin

    The Scotsman IB 200, supplied by Moffat, is a 200 kg ice storage bin (bin only) built for pubs, clubs, hotels and restaurants that need a large reserve of ice on hand. It has a stainless steel exterior, high-density insulation for slower ice melting, a soft-close door for easy ice taking and an internal ice scoop holder, and measures 760 x 860 x 1180 mm (W x D x H) at 39 kg.Why operators choose the IB 200 Storage bin only — pairs with the ice machine you choose — no ice-making head is included 200 kg ice storage capacity — a deep reserve of ice ready for peak trade Soft-close door — convenient, easy ice taking without the door slamming Stainless steel exterior — a hard-wearing finish that wipes clean behind the bar or in the back of house High-density insulation — slows ice melting so stored ice lasts longer Internal ice scoop holder included — keeps the scoop in its place inside the bin Adjustable legs — level the bin on uneven floors Specifications Brand Scotsman Model / MPN IB 200 Type Ice storage bin (bin only) Storage capacity 200 kg Dimensions 760 x 860 x 1180 mm (W x D x H) Net weight 39 kg Exterior Stainless steel Door Soft close Insulation High density Included Internal ice scoop holder Legs Adjustable Supplied by Moffat Warranty 24 Months Venue suitability: The IB 200 suits bars, restaurants, pubs and hotels that need more ice on hand than a small bin holds but not the footprint of the largest bins; at 760 mm wide it fits a standard back-of-house run. Very high-volume venues may need a larger bin.Compare more ice tubs and storage bins or browse the full Scotsman range.Installation & delivery: stand the bin on a level floor and set the adjustable legs to level it. Dispatched Australia-wide with a 24-month warranty — see our warranty information.Frequently asked questionsHow much ice does the Scotsman IB 200 hold?The Scotsman IB 200 ice storage bin holds up to 200 kg of ice.What are the dimensions of the Scotsman IB 200?The Scotsman IB 200 measures 760 x 860 x 1180 mm (W x D x H) and weighs 39 kg.Does the Scotsman IB 200 include an ice machine?No. The Scotsman IB 200 is a storage bin only; the ice machine is purchased separately.How does the Scotsman IB 200 keep ice from melting?The IB 200 uses high-density insulation for slower ice melting, behind a stainless steel exterior and a soft-close door.What warranty comes with the Scotsman IB 200?The Scotsman IB 200 carries a 24-month warranty.

    $2,085.00 $1,542.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW H 707 AS OX - 310kg - Modular Dice Ice Maker - NXW_707_AS_OX_RCLOSEUP_AN Scotsman NXW H 707 AS OX - 310kg - Modular Dice Ice Maker - NXW_707_AS_OX_RFH_AN

    ScotsmanScotsman NXW H 707 AS OX - 310kg - Modular Dice Ice Maker

    Dimensions W: 565mm D: 640mm H: 683mmPacked Weight: 86kg Product Features Head only Ice maker 310kg daily production rate W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model SB 293, NB 193, NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393, NB 530) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,064.00 $6,707.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW L 1007 AS OX - 430kg - Modular Dice Ice Maker - NXW_1007_AS_OX_RCLOSEUP_AN Scotsman NXW L 1007 AS OX - 430kg - Modular Dice Ice Maker - NXW_1007_AS_OX_RFH_AN

    ScotsmanScotsman NXW L 1007 AS OX - 430kg - Modular Dice Ice Maker

    Dimensions W: 765mm D: 640mm H: 780mmPacked Weight: 113kg Product Features Head only Ice maker 430kg daily production rate W 28mm x D 22mm x H 28mm, 15g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing One touch button for easy cleaning T304 grade stainless steel exterior Auto-alert indicator lights to show operation status and maintenance Requires storage bin model NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used with NB 948), UBH 1100 Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $11,742.00 $8,689.00 +GSTIncl. GST

  • Sale -26% Scotsman MXF 1027 AS OX - 430kg - Modular Flake Ice Maker - MXF_1027_AS_OX_RCLOSEUP_an Scotsman MXF 1027 AS OX - 430kg - Modular Flake Ice Maker - MXF_1027_AS_OX_RFH_an

    ScotsmanScotsman MXF 1027 AS OX - 430kg - Modular Flake Ice Maker

    Dimensions W: 560mm D: 615mm H: 735mmPacked Weight: 90kg Product Features Head only Ice maker 430kg daily production rate Produces very dry flake ice - water content 12% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Core ice system - stable Axial load evaporator system Highly balanced augur double fly system core evaporator High tech water sump with easy regulation system Ice level sensor for seamless operations Smart touch display with with bluetooth and cloud connectivity XWave app with improved electronics and programming Stainless steel finish with removable air grid Requires storage bin model NB 193, NB 393, NB 530, CBT 30 52 AMCD cover (required cover when used NB 393/ NB 530) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $13,859.00 $10,255.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW H 507 AS OX - 215kg - Modular Dice Ice Maker - NXW_507_AS_OX_RCLOSEUP_AN Scotsman NXW H 507 AS OX - 215kg - Modular Dice Ice Maker - NXW_507_AS_OX_RFH_AN

    ScotsmanScotsman NXW H 507 AS OX - 215kg - Modular Dice Ice Maker

    Dimensions W: 565mm D: 640mm H: 635mmPacked Weight: 78kg Product Features Head only Ice maker 215kg daily production rate W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model SB 293, NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,251.00 $5,365.00 +GSTIncl. GST

  • Sale -26% Scotsman AF 157 AS OX - 150kg - Self Contained Flake Ice Maker - AF_157_AS_OX_AU

    ScotsmanScotsman AF 157 AS OX - 150kg - Self Contained Flake Ice Maker

    Dimensions W: 950mm D: 605mm H: 1083mmPacked Weight: 88kg Product Features 150kg daily production rate 60kg storage bin capacity Residual water content 25% Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Stainless steel auger and freezing cylinder evaporator Water in/ ice out concept limits excess energy, water and time wastage Simple, reliable electromechanic controls Built-in storage bin Clean alert indicator to clean filter Reduce wastage with water in or ice out concept Easy access front condenser air filter for easy clean Resistant stainless steel exterior Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,760.00 $7,222.00 +GSTIncl. GST

  • Sale -26% Scotsman DXN 107 AS - 61kg Ice Maker - Cubelet Ice & Water Dispenser - DXN_107_AS_RCLOSEUP_AN Scotsman DXN 107 AS - 61kg Ice Maker - Cubelet Ice & Water Dispenser - DXN_107_AS_RFH_AN

    ScotsmanScotsman DXN 107 AS - 61kg Ice Maker - Cubelet Ice & Water Dispenser

    Dimensions W: 427mm D: 552mm H: 619mmPacked Weight: 56kg Product Features 61kg daily production rate 5kg storage bin capacity W 16mm x 15mm dia x H 7 - 8mm, 1g Ice cube Compact countertop ice and water dispenser Touch screen control with touch-free or button activated Programable dosage, ice or water dispensing or both Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Compact countertop Ice and water dispenser Ice evaporator with stainless steel auger High grade stainless steel panels External indicator lights Fast friendly cleaning mode Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $9,785.00 $7,240.00 +GSTIncl. GST

  • Sale -26% Scotsman DXN 187 AS - 125kg Ice Maker - Cubelet Ice & Water Dispenser - DXN_187_AS_RCLOSEUP_AN Scotsman DXN 187 AS - 125kg Ice Maker - Cubelet Ice & Water Dispenser - DXN_187_AS_RFH_AN

    ScotsmanScotsman DXN 187 AS - 125kg Ice Maker - Cubelet Ice & Water Dispenser

    Dimensions W: 427mm D: 552mm H: 769mmPacked Weight: 56kg Product Features 125kg daily production rate 7kg storage bin capacity W 16mm x 15mm dia x H 7 - 8mm, 1g Ice cube Compact countertop ice and water dispenser Touch screen control with touch-free or button activated Programable dosage, ice or water dispensing or both Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas Compact countertop Ice and water dispenser Ice evaporator with stainless steel auger High grade stainless steel panels External indicator lights Fast friendly cleaning mode Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $10,867.00 $8,041.00 +GSTIncl. GST

  • Sale -26% Scotsman NUL 157 AS OX - 78kg - Self Contained Dice Ice Maker

    ScotsmanScotsman NUL 157 AS OX - 78kg - Self Contained Dice Ice Maker

    Dimensions W: 600mm D: 610mm H: 770mmPacked Weight: 65kg Product Features 78kg daily production rate 20kg storage bin capacity W 28mm x D 22mm x H 28mm, 15g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes Hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $5,018.00 $3,713.00 +GSTIncl. GST

  • Sale -26% Scotsman NXW L 507 AS OX - 215kg - Modular Dice Ice Maker - NXW_507_AS_OX_RCLOSEUP_AN Scotsman NXW L 507 AS OX - 215kg - Modular Dice Ice Maker - NXW_507_AS_OX_RFH_AN

    ScotsmanScotsman NXW L 507 AS OX - 215kg - Modular Dice Ice Maker

    Dimensions W: 565mm D: 640mm H: 635mmPacked Weight: 78kg Product Features Head only Ice maker 215kg daily production rate W 28mm x D 22mm x H 28mm, 15g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing One touch button for easy cleaning T304 grade stainless steel exterior Auto-alert indicator lights to show operation status and maintenance Requires storage bin model SB 293, NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,251.00 $5,365.00 +GSTIncl. GST

  • Sale -26% Scotsman ECM 227 AS OX - 160kg - Self Contained Gourmet Ice Maker - ECM_227_AS_OX_RCLOSEUP_AN Scotsman ECM 227 AS OX - 160kg - Self Contained Gourmet Ice Maker - ECM_227_AS_OX_RFH_AN

    ScotsmanScotsman ECM 227 AS OX - 160kg - Self Contained Gourmet Ice Maker

    Dimensions W: 1078mm D: 719mm H: 1082mmPacked Weight: 112kg Product Features 160kg daily production rate 70kg storage bin capacity 30mm dia x H 34mm, 20g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,678.00 $6,421.00 +GSTIncl. GST

  • Sale -26% Moffat ID 100 - 100kg - Ice Dispenser - ID_100_FR_AU Moffat ID 100 - 100kg - Ice Dispenser - ID_100_RH_AU

    ScotsmanMoffat ID 100 - 100kg - Ice Dispenser

    Dimensions W: 760mm D: 855mm H: 1360mmPacked Weight: 95kg Product Features Dispensing Units Only 100kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 457, NW 608, NW 1008, NXW 457, NXW 607 and NXW 1007 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,190.00 $6,060.00 +GSTIncl. GST

  • Sale -26% Moffat ID 45 - 45kg - Ice Dispenser - ID_45_FR_AU Moffat ID 45 - 45kg - Ice Dispenser - ID_45_RH_AU

    ScotsmanMoffat ID 45 - 45kg - Ice Dispenser

    Dimensions W: 560mm D: 855mm H: 730mmPacked Weight: 70kg Product Features Dispensing Units Only 45kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 307, NW 507, NXW 307 and NXW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,103.00 $4,516.00 +GSTIncl. GST

  • Sale -26% Scotsman EXS 107 AS OX - 47kg - Self Contained Gourmet Ice Maker - EXS_107_AS_OX_RCLOSEUP_AN Scotsman EXS 107 AS OX - 47kg - Self Contained Gourmet Ice Maker - EXS_107_AS_OX_RFH_AN

    ScotsmanScotsman EXS 107 AS OX - 47kg - Self Contained Gourmet Ice Maker

    Dimensions W: 485mm D: 575mm H: 908mmPacked Weight: 59kg Product Features 47kg daily production rate 18kg storage bin capacity 30mm dia x H 30mm, 25g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System PWD-Progressive water discharge pumps excess water up to 15 meters Horizontal Ice evaporator spray-system technology Simple, reliable electromechanic controls Built-in storage bin Resistant stainless steel exterior Easy access front ON-OFF switch Routine maintenance visible alarm light on front panel Ergonomically designed ice storage access with disappearing door and door closing movement dampening system Front access condenser air filter, removable and washable Includes removable air filter, ice scoop, water and drain hose Optional adjustable feet available All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $5,162.00 $3,819.00 +GSTIncl. GST

  • Sale -26% Scotsman NXWH 457 AS OX - 190kg - Modular Dice Ice Maker - NXW_457_AS_OX_RCLOSEUP_AN Scotsman NXWH 457 AS OX - 190kg - Modular Dice Ice Maker - NXW_457_AS_OX_RFH_AN

    ScotsmanScotsman NXWH 457 AS OX - 190kg - Modular Dice Ice Maker

    Dimensions W: 767mm D: 636mm H: 600mmPacked Weight: 85kg Product Features Head only Ice maker 190kg daily production rate W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Top air discharge - suitable for narrown space installation Front evaporator access for easy servicing Easy internal cleaning with internal Remote service support capability with X Wave app Requires storage bin model NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with NB 393, NB 530) Includes removable air filter, water & drain hose All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $7,014.00 $5,190.00 +GSTIncl. GST

  • Sale -26% Moffat ID 60 - 60kg - Ice Dispenser - ID_60_FR_AU Moffat ID 60 - 60kg - Ice Dispenser - ID_60_RH_AU

    ScotsmanMoffat ID 60 - 60kg - Ice Dispenser

    Dimensions W: 560mm D: 855mm H: 1360mmPacked Weight: 83kg Product Features Dispensing Units Only 60kg storage bin capacity 5kg / min output speed Suitable for any ice maker with standard square cube size W 22mm x D 22mm x H 22mm Hands-free sensor activates ice dispensing mechanism 304 grade stainless steel construction Adjustable feet Compatible with Scotsman NW 307, NW 507, NXW 307 and NXW 507 ice maker head units All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,727.00 $4,977.00 +GSTIncl. GST

  • Sale -26% Scotsman NUH 307 AS OX - 129kg - Self Contained Dice Ice Maker - NU_307_AS_OX_RCLOSEUP_AN Scotsman NUH 307 AS OX - 129kg - Self Contained Dice Ice Maker - NU_307_AS_OX_RFH_AN

    ScotsmanScotsman NUH 307 AS OX - 129kg - Self Contained Dice Ice Maker

    Dimensions W: 650mm D: 690mm H: 1003mmPacked Weight: 77kg Product Features 129kg daily production rate 37kg storage bin capacity W 10mm x D 22mm x H 28mm, 6g ice cubes Air cooled version Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes EcoX hydrocarbons R290 refrigerant gas XSafe - Natural Sanitation System Vertical evaporator spray-system technology Front in and out air flow designed for placement in tight spaces Ergonomic access to ice with sliding disappearing door One touch cleaning for time and labour saving Built-in storage bin One touch button for easy cleaning Easy access front condenser air filter for easy clean Resistant stainless steel exterior External indicator lights to show operation status and maintenance alert Includes removable air filter, ice scoop, water and drain hose Optional extras: SC8700000200 - Optional leg kit (NU 100/ NU 150/ NU 220 models) All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $6,716.00 $4,969.00 +GSTIncl. GST

© 2026 Commercial Kitchen Store, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account