Commercial ice machines for sale, built for the hospitality industry — self contained, under bench, benchtop, modular and ice dispensing. Whether you run a cafe, bar, restaurant, pub, hotel, club or catering operation, ice is a production input like any other: if the machine cannot keep up with your busiest service, everything downstream slows down. This range covers 179 machines and accessories from Scotsman, Hoshizaki, Skope, Blizzard, Bromic and Polar, with delivery Australia-wide.
Who these commercial ice machines are for
A commercial ice machine is rated for continuous duty and specified by daily output in kilograms over 24 hours. That is the key difference from a domestic ice maker: a commercial unit is built to run all day, is plumbed in, and is designed to be serviced. Venues that typically need one include bars and pubs pouring spirits and mixers, cafes running iced coffee through summer, restaurants holding seafood and salad on ice, clubs and function venues with peaked demand, and medical, laboratory and food-processing sites with hygiene requirements.
A self contained machine has the ice-making head and the storage bin in one cabinet. It is the most common format in Australian hospitality because it is a single delivery, a single install and a single footprint. Output typically runs from around 20 kg to 300 kg per 24 hours. Browse the full range of self contained ice makers.
Under bench ice makers
Under bench (or undercounter) machines are self contained units sized to fit beneath a standard 900 mm bench, which makes them the default choice for back bars and service areas where floor space is the constraint. Height is the specification that matters — measure the gap before you order, and allow clearance for airflow and for the unit to be pulled out for service.
Benchtop and countertop ice makers
Benchtop machines sit on the counter and suit low-volume sites, offices, waiting areas and venues that only need ice for part of the day. They are the lowest-cost entry point into the category and the simplest to install.
Modular ice machines and storage bins
Modular machines are the ice-making head only and sit on top of a separate storage bin, so you size production and storage independently. This is how larger venues scale: one head, a bin sized to the service pattern, and the option to increase either later. See modular ice makers and the matching ice storage bins.
Ice dispensers and ice wells
Dispensers deliver ice on demand without an open bin, which suits self-serve areas and sites with tighter hygiene requirements. Bar ice wells and ice crushers complete a drinks station.
Ice types explained
The ice a machine produces is a real specification, not a detail. Full cube and half dice melt slowly and are the standard for spirits and mixed drinks. Gourmet or top-hat ice is clear and dense, and is chosen where the drink is on display. Flake ice is soft and mouldable, which is why it is used for seafood display, salad bars and food transport. Nugget, cubelet and chewblet ice is chewable and absorbs flavour, and is popular for soft drinks and healthcare. Crescent ice packs tightly and is common in high-volume beverage service. Choose the ice first, then the machine that makes it — not the other way round.
Commercial ice machines by venue type
Bars and pubs generally need cube or crescent ice with enough storage to cover a Friday night without the bin running dry. Cafes running iced coffee and smoothies lean toward nugget or flake. Restaurants holding seafood, oysters or salad on display need flake. Function venues and clubs are the classic case for a modular head on a large bin, because demand is peaked rather than steady. Medical and laboratory sites usually specify flake or nugget with a dispenser for hygiene reasons.
Choosing the right commercial ice machine
1. Size to your busiest day, not your average
Estimate ice per customer for your service style, multiply by covers on your busiest day, then add headroom. Under-sizing is the most common and most expensive mistake in this category, because the fix is a second machine. Note that published output figures are laboratory ratings — real-world production is lower, and falls further as ambient and water temperatures rise.
2. Check water, drainage and ambient temperature before you buy
Nearly all commercial ice machines need a cold water supply and a drain. Air-cooled machines also need clearance around the cabinet and reject heat into the room, which matters in an already-hot kitchen; water-cooled and remote condenser options exist where airflow or heat load is a problem. Australian summer ambient temperatures have a direct effect on output, so specify for your hottest month, not a mild one.
3. Match the ice type and storage to the service pattern
A machine that makes the right ice but stores too little will still fail you at peak. Storage capacity and production rate are separate numbers — check both. If the two do not line up for your venue, that is the point at which a modular head on a larger bin makes more sense than a self contained unit.
Installation, hygiene and water quality in Australia
Ice is a food, and an ice machine is food-contact equipment. Plan for routine cleaning and sanitising in line with the manufacturer's schedule, and treat filtration as part of the specification rather than an accessory — water quality affects both ice clarity and machine life, and scale is the most common cause of premature failure in hard-water areas. Plumbing and drainage work should be carried out by a licensed plumber, and electrical connection by a licensed electrician.
Complete your ice setup
Most sites need more than the machine itself. Pair a modular head with a correctly sized storage bin, add scoops and filtration, and consider whether an ice and water dispenser suits a self-serve area better than an open bin.
How much does a commercial ice machine cost in Australia?
Across the machines and accessories currently in this range, prices run from about $147 for ice-handling accessories to around $24,300 for large-capacity modular systems, with a median of roughly $5,260. Benchtop and small under bench machines sit at the lower end; high-output modular heads, large storage bins and dispensing systems sit at the top. Capacity, ice type, cooling method and brand are the main variables.
Do commercial ice machines need a drain?
Almost all of them do. Ice machines produce meltwater and purge water during the harvest cycle, and that has to go somewhere. Gravity-drained machines need a floor waste or a drain point below the outlet; where that is not available, some machines can be specified with a drain pump to lift water to a higher outlet. Confirm the drain requirement for the specific model before installation, because it determines where the machine can physically go.
Does a commercial ice machine keep the ice frozen?
The storage bin on a commercial ice machine is insulated, not refrigerated, on most self contained and modular units. Ice is held cold by its own mass and will slowly melt, with the meltwater draining away. That is normal and is why bins are sized to a service period rather than to long-term storage. If you need ice held for extended periods, that is a job for a freezer, not an ice machine bin.
What is the difference between self contained, under bench and modular machines?
Self contained describes the technology — the ice head and the storage bin in one cabinet. Under bench and benchtop describe the form factor, meaning where the machine physically fits. Most under bench machines are also self contained. Modular is the alternative technology: the head is bought separately from the bin, so production and storage are sized independently.
Which ice type should I choose?
Match it to what you serve. Cube and half dice for spirits and mixers, gourmet for drinks on display, flake for seafood and salad, nugget or cubelet for soft drinks and healthcare, crescent for high-volume beverage service. The ice type is fixed by the machine, so decide it before shortlisting models.
What size ice machine do I need?
Work from covers on your busiest day rather than an average week, allow for ambient temperature in your hottest month, and check that the storage bin covers your peak service period as well as the daily total. If production and storage requirements pull in different directions, a modular head on a larger bin is usually the answer.
Do you deliver commercial ice machines Australia-wide?
Yes. Delivery is available Australia-wide. Larger modular systems, dispensers and bins ship as freight items, so confirm site access and any lift or stair requirements when ordering.
Buying guidance
If you are unsure between formats, start from the constraint that will not move: the space the machine has to fit into, the water and drain points available, and the ice your drinks or food service actually requires. Those three narrow the field quickly. From there, size to the busiest day and allow headroom for a hot Australian summer. For a fuller walk-through of sizing and specifying, read our commercial ice machine buying guide for Australian venues, or see the breakdown of cube, nugget and flake ice if the ice type is the open question.
The Blizzard SD-130B is a no-touch commercial ice dispenser that stores and hygienically dispenses ice, built for high-traffic bars, hotels and self-serve venues. It holds a 60 kg ice bin, runs on a standard 240 V outlet, and pairs with a separate Blizzard ice machine head (SN-420P, SN-145C or SN-280C) to form a complete ice system.
Why operators choose the SD-130B
No-touch dispensing - staff and guests take ice without hand contact, improving hygiene and food-safety compliance
60 kg ice bin - buffers a full service of ice for busy bars, cafes and convenience stores
304-grade stainless steel body - corrosion-resistant, hard-wearing and quick to wipe down
UV sterilisation module - high-efficiency sanitising helps keep stored ice clean
Adjustable feet - level the cabinet on uneven commercial flooring
Pairs with a Blizzard ice head - designed to run with the SN-420P, SN-145C or SN-280C machine head (sold separately)
Specifications
Brand
Blizzard
Model / MPN
SD-130B
Type
Ice & Water Dispenser
Ice bin capacity
60 kg
Compatible machine heads
SN-420P, SN-145C, SN-280C
Body material
304 stainless steel
Sterilisation
UV module
Power
240 V; 210 W; 10 A
Power type
Electric (single phase)
Product dimensions
560(W) x 855(D) x 1360(H) mm
Packed dimensions
918(W) x 645(D) x 1410(H) mm
Net weight 77 kg Packed weight
205 kg
Warranty
2 Years Parts and Labour
Venue suitability: The no-touch dispense head and 60 kg bin make the SD-130B a strong fit for self-serve bars, hotels, healthcare and convenience stores where hygiene and steady ice availability matter. It is a storage-and-dispense unit rather than a stand-alone maker, so it suits venues ready to run it with a matched Blizzard ice head.
To complete the system, browse our ice & water dispensers and the wider Blizzard ice range to select a compatible machine head.
Installation & delivery: Plugs into a standard 240 V 10 A outlet and must be paired with a Blizzard machine head to produce ice. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide.
Frequently asked questions
Does the SD-130B make its own ice? No. It is a dispenser and storage bin that must be paired with a Blizzard ice machine head - the SN-420P, SN-145C or SN-280C - to produce ice.
How much ice does the bin hold? The SD-130B has a 60 kg ice storage bin.
What power supply does it need? A standard 240 V 10 A outlet; the dispenser draws 210 W.
How does it keep ice hygienic? Ice is dispensed with no hand contact and a built-in UV sterilisation module helps sanitise stored ice.
What warranty is included? It comes with a 2 Years Parts and Labour warranty.
Need a quality compact ice cube maker that punches well above its weight? The tiny NDP20 now uses R290 Hydrocarbon natural refrigerant so you can produce 23kg/24hours of crystal-clear ALFA ice cubes with more power efficiency and virtually zero impact on the environment. Perfect for small bars and cafes.
Now with R290 Hydrocarbon natural refrigerant technology for even lower bills and virtually zero impact on the environment
Make crystal clear ice every time using a patented spray system
Ice type: ALFA - maximizes productivity, cools quickly and melt slowly in the glass
Suitable for very hot climates (ambient temperatures up to 43°C)
Has 6kg of convenient built in ice storage capacity
Designed for small cafes, bars, pubs and restaurants - 350 W x 475 D x 593 H (mm)
Easily built into joinery with front and rear-facing ventilation (100mm clearance required)
Fitted with 6mm feet
Best suited to: Restaurants / Cafes, Clubs / Pubs / Bars, Hospitality / Venues, Accommodation, Schools, Bakery / Pastry
Dimensions: 350 W x 475 D x 593 (+6mm feet) H (mm)
Ice Production (kg/24h): 23
Ice Storage (kg): 6
Ice Cube Dimensions: 36 W x 26 D x 23 H (mm)
Temperature Range: 10°C to 43°C
Refrigerant: R290 (natural refrigerant)
Door Type: Solid
Material: AISI 304 stainless steel body
Total Floor Area (m2): 0.17
Weight (kg): 32
kW: 0.27
Current Draw (Amps): 1.41
Noise Measurement (dB): 57
Controller: Electronic control
Power Supply: 230 Volts a.c. 50 Hz, single phase supply
Product Dimensions: 350(W) x 599(H) x 475(D)mmOptions Available:
Replacement filter cartridge SXX11696
Water filter kit SXX11695
Contact Us for more Information All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
This Hoshizaki KM-60C-HC is a self-contained Crescent Edge ice maker producing up to 52 kg of high-quality Crescent Edge Ice per 24 hours, meeting even the strictest hygiene requirements and suitable for all operational requirements and kitchen measurements.
The KM Edge range has an enlarged, bonded evaporator surface. Accelerating harvest cycles, the technology behind the KM Edge range will help you to increase your serving capacity instantly. More ice in less amount of time. Individual premium crescent cube with no ice bridging.
Exceptionally hard crystal clear cubes that melt slowly.
Durable stainless steel exterior.
Slide in air filter at front for easy cleaning -maintaining performance efficiency.
Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles.
Flush mount to rear wall.
Good in hard water areas.
Snap in water tank design – easy to remove for sanitization.
Low electrical consumption.
Low water consumption.
LED lights and audible alarms.
3 year parts and labour warranty on entire unit.
Production Capacity per 24hours
Approx. 60kg @ 10°C Air temp; 10°C WaterApprox. 52kg @ 21°C Air temp; 15°C WaterApprox. 37kg @ 32°C Air temp; 21°C Water
Max Storage Capacity
Approx. 23kg
Freeze Cycle Time
Approx. 26min
Ice Production Per cycle
Approx. 0.96kg / 110pcs
Width
605mm
Depth
610mm
Height
988mm
Weight Net
45kg
Packed Weight
57kg
Cooling
Air
AC Supply Voltage
1 PHASE 220-240V 50Hz/ 10Amp Plug
Amperage
Running: 1.6A Starting: 8.5A
Refrigerant Charge
R290/90g
Operating Conditions
Ambient Temp.: 7-38°CWater Supply Temp.: 7-32°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6%
Additional Parts
87000104 Low capacity Water Filter System87000106 320mm Replacement Cartridge87000148 Water Filter Kit & Guage87000146 Water Filter78000098 Drain pump78000099 Drain pump81000116 Stainless Steel Hose95001013 Adjustable Leg
Product Dimensions: 605(W) x 610(D) x 988(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
This Hoshizaki KM-80C-HC is a self-contained Crescent Edge ice maker producing up to 75 kg of high-quality Crescent Edge Ice per 24 hours, meeting even the strictest hygiene requirements and suitable for all operational requirements and kitchen measurements.
The KM Edge range has an enlarged, bonded evaporator surface. Accelerating harvest cycles, the technology behind the KM Edge range will help you to increase your serving capacity instantly. More ice in less amount of time.Individual premium crescent cube with no ice bridging.
Exceptionally hard crystal clear cubes that melt slowly.
Durable stainless steel exterior.
Slide in air filter at front for easy cleaning -maintaining performance efficiency.
Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles.
Flush mount to rear wall.
Good in hard water areas.
Snap in water tank design – easy to remove for sanitization.
Low electrical consumption.
Low water consumption.
LED lights and audible alarms.
3 year parts and labour warranty on entire unit.
Production Capacity per 24hours
Approx. 75kg @ 10°C Air temp; 10°C WaterApprox. 68kg @ 21°C Air temp; 15°C WaterApprox. 55kg @ 32°C Air temp; 21°C Water
Max Storage Capacity
Approx. 34kg
Freeze Cycle Time
Approx. 23min
Ice Production Per cycle
Approx. 1.15kg / 130pcs
Width
605mm
Depth
712mm
Height
988mm
Weight Net
50kg
Packed Weight
63kg
Cooling
Air
AC Supply Voltage
1 PHASE 220-240V 50Hz/ 10Amp Plug
Amperage
Running: 2.1A Starting: 12.5A
Refrigerant Charge
R290/147g
Operating Conditions
Ambient Temp.: 7-38°CWater Supply Temp.: 7-32°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6%
Additional Parts
87000104 Low capacity Water Filter System87000106 320mm Replacement Cartridge87000148 Water Filter Kit & Guage87000146 Water Filter78000098 Drain pump78000099 Drain pump81000116 Stainless Steel Hose95001013 Adjustable Leg
Product Dimensions: 605(W) x 712(D) x 988(H)mm All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Hoshizaki IM-45CNE-25 is a self-contained cube ice machine that makes and stores hard, crystal-clear cube ice in one undercounter unit, producing up to 35kg of ice per 24 hours with a built-in 15kg storage bin.Why operators choose the IM-45CNE-25
Slow-melt cube ice — dense, clear cubes hold their shape in premium drinks and dilute slowly.
Self-contained design — ice maker and storage bin in one cabinet, ready to plug in and run.
Fresh-water cycle — each batch is made from fresh water through a closed-cell circuit for hygiene.
Power and water saving — intelligent control circuit reduces running cost.
Stainless steel exterior — durable, easy-clean cabinet with accessible air filters.
Specifications
Brand
Hoshizaki
Model / MPN
IM-45CNE-25
Type
Self-contained cube ice machine
Ice production (per 24h)
Approx. 35kg @10°C / 32kg @21°C / 27kg @32°C air temp
Storage bin capacity
Approx. 15kg
Ice type
Cube
Freeze cycle
Approx. 22 min
Cooling
Air-cooled
Refrigerant
R134a / 160g
Power supply
1-phase 220-240V 50Hz, 10A plug
Running current
2.4A
Operating ambient
1-40°C
Construction
Stainless steel exterior
Dimensions (W x D x H)
633 x 511 x 780mm (incl. 90-125mm adjustable legs)
Packed dimensions
683 x 561 x 830mm
Net weight
48kg
Warranty
3 years parts & labour (unit), 5 years parts & labour (evaporator), 5 years parts (compressor)
Venue suitability: Ideal for bars, cafes, restaurants and function venues that need a steady supply of premium cube ice for cocktails and beverages without a separate ice bin. Browse more Self Contained Ice Makers or the full Hoshizaki range to compare production rates.Installation & delivery: Requires a cold water supply, drain and a standard 10A power point; allow clearance for air-cooled ventilation. Dispatched Australia-wide.Frequently asked questionsHow much ice does the IM-45CNE-25 make per day? It produces approximately 35kg per 24 hours at 10°C, 32kg at 21°C and 27kg at 32°C ambient air temperature.How much ice can it store? The built-in bin holds approximately 15kg of ice.What type of ice does it make? Hard, crystal-clear cube ice that melts slowly, suited to premium beverages and cocktails.Is it air-cooled or water-cooled? It is air-cooled, so ensure adequate ventilation and clearance around the unit.What power supply does it need? A standard single-phase 220-240V 50Hz supply via a 10A plug.
Produce refreshing ice almost anywhere with the stylish and reliable Polar C-Series countertop ice machine. Incredibly easy to use and with little training required, simply fill the internal water reservoir, and select the size of cube required. The Polar gets to work fast, producing ice every 6-12 minutes (depending on ice size). As there's no mains water or drain connection required, making the Polar countertop ice maker highly portable and perfect for mobile catering or as a backup ice machine.This compact design not only helps to produce small amounts of ice quickly, making the machine perfect for adding extra capacity, but also means the unit can easily be packed away when not in use, all without taking up too much space. Once service is over the ice machine is simple to drain down and clean, with many parts easily removed for maximum hygiene.
Product features
Dimensions 380(H) x 305(W) x 380(D)mm
Material ABS
Refrigerant R600a
Voltage 230V
Weight 13.5kg
11kgs/24hrs
Not suitable for use in outdoor & mobile environments including catering vehicles
Bullet ice
Fan Cooled
Size selection allows you to choose ice that best suits your drinks menu
Manual Fill
Ice is dispensed into the 1kg capacity bin ready for immediate use
Lid helps to maintain temperature and keep ice free from contaminants
Supplied with food-safe ice scoop
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
6 Monthly Maintenance Program
Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
Sanitise water reservoir, distribution tubes, and bin interior.
Clean and flush condenser coils (air-cooled units).
Inspect condenser fan motor and blades.
Check inlet water valve, float, and filters for correct operation.
Verify ice thickness probe or sensor calibration.
Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary.
Test compressor amperage and general performance.
Inspect water pump operation and clean pump housing.
Check harvest cycle operation (heater or hot gas valve).
Inspect electrical connections, relays, and contactors.
Replace inline water filter cartridge.
The Blizzard SN-229D is a countertop nugget ice & water dispenser, 100 kg of nugget ice per 24 hours, 2.8 kg storage, in a 350 × 600 × 830 mm footprint. It runs on 240V, 525 W from a 10 A supply.
Why operators choose the SN-229D
Soft, chewable nugget ice — Delivers a premium drinking experience and cools drinks faster.
Three dispensing modes — Choose ice, water, or ice and water to suit every need.
UV sterilisation — UV LED technology for hygienic dispensing.
Automatic cleaning system — Simplifies daily maintenance and keeps the machine clean; internal cleaning port for quick internal cleaning when required.
Programmable cup sizes — Dispense the right amount every time.
LED touch controls — Intuitive interface for easy, modern operation.
Sealed refrigeration system — Reliable performance with consistent ice production.
Removable drip tray and filter — Easy to remove and clean for maximum hygiene.
Energy-efficient — R290 refrigerant for lower energy use and reduced environmental impact.
Specifications
Brand
Blizzard
Model / MPN
SN-229D
Type
Ice & Water Dispenser
Capacity
100 kg of nugget ice per 24 hours, 2.8 kg storage
Ice Type
Soft nugget (chewblet)
Dispensing Modes
Ice, water, or ice and water
Power
240V, 525W/10 A
Product Dimensions
350(W) × 600(D) × 830(H) mm
Packed Dimensions
430(W) × 660(D) × 920(H) mm
Warranty
2 Years Parts and Labour
Venue suitability: The SN-229D suits cafés, offices, healthcare facilities, hotels and commercial workplaces that want hygienic self-serve ice and chilled water. Browse more Blizzard ice machines.
Installation & delivery: The SN-229D runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information.
Frequently asked questions
What is the capacity of the SN-229D?The SN-229D makes up to 100 kg of nugget ice per 24 hours and holds 2.8 kg in storage.
What power supply does the SN-229D need?The SN-229D runs on single-phase 240V, 525 W from a 10 A supply.
What can the SN-229D dispense?Ice, water, or ice and water: it has three dispensing modes, with programmable cup sizes.
Which Blizzard dispenser should I choose?The SN-229D compact model makes 100 kg of nugget ice per day with 2.8 kg storage, suited to cafés, offices and smaller businesses; the SN-369D high-capacity model makes 166 kg per day with 7.5 kg storage for busy operations.
How do I choose the right size countertop nugget ice & water dispenser?Match capacity to the stock you hold and check the 350 mm width against the space available. Our guide to cube, nugget and flake ice compares the main ice types.
What warranty does the SN-229D carry?The SN-229D is covered by 2 years parts and labour.
The Blizzard SN-369D is a countertop nugget ice & water dispenser, 166 kg of nugget ice per 24 hours, 7.5 kg storage, in a 462 × 600 × 935 mm footprint. It runs on 240V, 711 W from a 10 A supply.
Why operators choose the SN-369D
Soft, chewable nugget ice — Delivers a premium drinking experience and cools drinks faster.
Three dispensing modes — Choose ice, water, or ice and water to suit every need.
UV sterilisation — UV LED technology for hygienic dispensing.
Automatic cleaning system — Simplifies daily maintenance and keeps the machine clean; internal cleaning port for quick internal cleaning when required.
Programmable cup sizes — Dispense the right amount every time.
LED touch controls — Intuitive interface for easy, modern operation.
Sealed refrigeration system — Reliable performance with consistent ice production.
Removable drip tray and filter — Easy to remove and clean for maximum hygiene.
Energy-efficient — R290 refrigerant for lower energy use and reduced environmental impact.
Specifications
Brand
Blizzard
Model / MPN
SN-369D
Type
Ice & Water Dispenser
Capacity
166 kg of nugget ice per 24 hours, 7.5 kg storage
Ice Type
Soft nugget (chewblet)
Dispensing Modes
Ice, water, or ice and water
Power
240V, 711W/10 A
Product Dimensions
462(W) × 600(D) × 935(H) mm
Packed Dimensions
530(W) × 655(D) × 1070(H) mm
Warranty
2 Years Parts and Labour
Venue suitability: The SN-369D suits cafés, offices, healthcare facilities, hotels and commercial workplaces that want hygienic self-serve ice and chilled water. Browse more Blizzard ice machines.
Installation & delivery: The SN-369D runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information.
Frequently asked questions
What is the capacity of the SN-369D?The SN-369D makes up to 166 kg of nugget ice per 24 hours and holds 7.5 kg in storage.
What power supply does the SN-369D need?The SN-369D runs on single-phase 240V, 711 W from a 10 A supply.
What can the SN-369D dispense?Ice, water, or ice and water: it has three dispensing modes, with programmable cup sizes.
Which Blizzard dispenser should I choose?The SN-229D compact model makes 100 kg of nugget ice per day with 2.8 kg storage, suited to cafés, offices and smaller businesses; the SN-369D high-capacity model makes 166 kg per day with 7.5 kg storage for busy operations.
How do I choose the right size countertop nugget ice & water dispenser?Match capacity to the stock you hold and check the 462 mm width against the space available. Our guide to cube, nugget and flake ice compares the main ice types.
What warranty does the SN-369D carry?The SN-369D is covered by 2 years parts and labour.
The Blizzard FWIC-54C is a self-contained ice maker, 54 kg of ice per 24 hours, 30 kg storage, in a 675 × 600 × 750 mm footprint. It runs on 240V, 588 W from a 10 A supply.
Why operators choose the FWIC-54C
Crescent-shaped ice — Slower melting with clear drink presentation.
Colder drinks, less dilution — Keeps drinks cooler for longer.
Fully automatic operation — Fast ice making with auto stop and low water alarm.
Upward sliding door — Needs less front clearance than a swing door.
Eco-friendly refrigerant — R290 natural refrigerant.
Specifications
Brand
Blizzard
Model / MPN
FWIC-54C
Type
Self Contained Ice Maker
Capacity
54 kg of ice per 24 hours, 30 kg storage
Ice Type
Crescent
Body
Stainless Steel
Power
240V, 588W/10 A
Product Dimensions
675(W) × 600(D) × 750(H) mm
Packed Dimensions
860(W) × 840(D) × 1000(H) mm
Warranty
2 Years Parts and Labour
Venue suitability: The FWIC-54C suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range.
Installation & delivery: The FWIC-54C runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information.
Frequently asked questions
What is the capacity of the FWIC-54C?The FWIC-54C makes up to 54 kg of ice per 24 hours and holds 30 kg in storage.
What power supply does the FWIC-54C need?The FWIC-54C runs on single-phase 240V, 588 W from a 10 A supply.
Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers.
How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 675 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues.
What warranty does the FWIC-54C carry?The FWIC-54C is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below.
2 Years Parts and Labour Warranty All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Blizzard SIC-63R is a self-contained ice maker, 63 kg of ice per 24 hours, 25 kg storage, in a 675 × 600 × 795 mm footprint. It runs on 240V, 810 W from a 10 A supply.
Why operators choose the SIC-63R
Octagonal cylinder ice — 30 × 30 × 25 mm crystal-clear octagonal ice.
Premium presentation — Faceted design enhances crystal clarity and drink presentation.
Colder drinks, less dilution — Helps keep whisky, cocktails and premium spirits colder for longer.
Fully automatic operation — With low water alarm.
Eco-friendly refrigerant — R290 natural refrigerant.
Specifications
Brand
Blizzard
Model / MPN
SIC-63R
Type
Self Contained Ice Maker
Capacity
63 kg of ice per 24 hours, 25 kg storage
Ice Type
Octagonal cylinder, 30 × 30 × 25 mm
Body
Stainless Steel
Power
240V, 810W/10A
Product Dimensions
675(W) × 600(D) × 795(H) mm
Packed Dimensions
860(W) × 840(D) × 950(H) mm
Warranty
2 Years Parts and Labour
Venue suitability: The SIC-63R suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range.
Installation & delivery: The SIC-63R runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information.
Frequently asked questions
What is the capacity of the SIC-63R?The SIC-63R makes up to 63 kg of ice per 24 hours and holds 25 kg in storage.
What power supply does the SIC-63R need?The SIC-63R runs on single-phase 240V, 810 W from a 10 A supply.
Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers.
How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 675 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues.
What warranty does the SIC-63R carry?The SIC-63R is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below.
2 Years Parts and Labour Warranty All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Blizzard SIC-40L is a self-contained ice maker, 40 kg of ice per 24 hours, 20 kg storage, in a 506 × 600 × 850 mm footprint. It runs on 240V, 820 W from a 10 A supply.
Why operators choose the SIC-40L
Crystal-clear square ice — Large 50 × 50 × 50 mm cubes.
Slow-melting cubes — Keep drinks colder for longer with less dilution.
Hygienic ice production — Built-in sterilisation module.
Fully automatic operation — Fast ice making with auto stop and low water alarm.
Splash-resistant — IPX3 rated for splash resistance.
Eco-friendly refrigerant — R290 natural refrigerant.
Specifications
Brand
Blizzard
Model / MPN
SIC-40L
Type
Self Contained Ice Maker
Capacity
40 kg of ice per 24 hours, 20 kg storage
Ice Type
Crystal square cubes, 50 × 50 × 50 mm
Body
Stainless Steel
Power
240V, 820W/10A
Product Dimensions
506(W) × 600(D) × 850(H) mm
Packed Dimensions
655(W) × 705(D) × 1065(H) mm
Warranty
2 Years Parts and Labour
Venue suitability: The SIC-40L suits bars, restaurants, cafés and hotels that need a steady supply of quality ice from a compact under-bench unit. Browse more under bench ice makers or the full Blizzard range.
Installation & delivery: The SIC-40L runs on 240V from a 10 A supply. Warranty: 2 Years Parts and Labour — see our warranty information.
Frequently asked questions
What is the capacity of the SIC-40L?The SIC-40L makes up to 40 kg of ice per 24 hours and holds 20 kg in storage.
What power supply does the SIC-40L need?The SIC-40L runs on single-phase 240V, 820 W from a 10 A supply.
Which Blizzard ice type suits my venue?FED's range covers three ice types: SIC-40L makes 50 mm crystal square cubes (40 kg/day), SIC-63R makes octagonal cylinder ice (63 kg/day) and FWIC-54C makes crescent ice (54 kg/day). For soft nugget ice, see the SN-229D and SN-369D countertop dispensers.
How do I choose the right size self-contained ice maker?Match capacity to the stock you hold and check the 506 mm width against the space available. Our commercial ice machine buying guide walks through choosing one for Australian venues.
What warranty does the SIC-40L carry?The SIC-40L is covered by 2 years parts and labour. Ice machines must be maintained every 6 months (water filter cartridge and de-scaling); if the machine is not maintained, the warranty may be void. The maintenance program is set out below.
2 Years Parts and Labour Warranty All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
The Polar UA039-A is a self-contained ice machine that produces and stores ice in one benchtop unit with no separate bin, built for bars and similar professional venues. It carries 4kg capacity, a 380 × 590 × 477 mm footprint, stainless steel construction. GEMS Registration Number: 176214.
Why operators choose it
GEMS Registration Number — 176214
Two UVC sterilising functions reduce bacteria growth
Solid door keeps ice uncontaminated & blocks UVC light exposure
4kg storage ensures a ready supply
Intuitive digital display and controls with indicator lights
Self clean function
Includes installation kit & food-safe ice scoop
Countertop design uses gravity drainage system
Specifications
Brand
Polar
Model / MPN
UA039-A
SKU
UA039-A
Type
Self-Contained Ice Machine
Capacity
4kg
Dimensions (W×H×D)
380 × 590 × 477 mm
Voltage
220-240V
Power
ful compressor cooling with fuss-free automatic defrosting
Output
20kg/day
Refrigerant
R600a / GWP 3
Material
Stainless Steel
Warranty
1 Year Parts & Labour
Net weight
25.4kg
Shipping weight
110 kg
Which venues it suits
With 4kg on hand, it fits bars, cafés and restaurants needing on-demand ice without a modular head and bin. Storage is limited by design — high-volume venues need a modular machine over a dedicated bin.
Compare the rest of our self contained ice makers for other sizes and configurations, or browse the full Polar range.
Installation & delivery
It runs on a 220-240V supply, so it plugs into a standard outlet with no licensed electrical work required. Leave clearance around the condenser for airflow. We dispatch from our Sydney warehouse and partner sites Australia-wide. Shipping weight is 110 kg. Warranty is 1 year — see our warranty and service requests page.
Frequently asked questions
What capacity is the Polar UA039-A?
It offers 4kg of usable capacity.
What are the dimensions of the UA039-A?
380 mm wide × 590 mm high × 477 mm deep. Measure your opening against the width and depth before ordering.
What power supply does it need?
220-240V. It runs from a standard outlet — no licensed electrical work is required.
Which refrigerant does it use?
R600a / GWP 3 — a low global-warming-potential hydrocarbon refrigerant.
What is it made from?
Stainless Steel.
What warranty comes with the UA039-A?
12 months. Full terms and how to lodge a claim are on our warranty and service requests page.
Is documentation available?
Yes — 2 supplier documents are attached to this page for download, covering setup, operation and parts.
Does it lock?
Solid door keeps ice uncontaminated & blocks UVC light exposure.
Dimensions
W: 767mm D: 636mm H: 600mmPacked Weight: 90kg
Product Features
Head only Ice maker
280kg daily production rate
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with NB 393, NB 530)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 600mm D: 610mm H: 770mmPacked Weight: 65kg
Product Features
80kg daily production rate
20kg storage bin capacity
W 10mm x D 22mm x H 28mm, 6g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
Hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Front in and out air flow designed for placement in tight spaces
Ergonomic access to ice with sliding disappearing door
One touch cleaning for time and labour saving
Built-in storage bin
One touch button for easy cleaning
Easy access front condenser air filter for easy clean
Resistant stainless steel exterior
External indicator lights to show operation status and maintenance alert
Includes removable air filter, ice scoop, water and drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 767mm D: 636mm H: 600mmPacked Weight: 90kg
Product Features
Head only Ice maker
280kg daily production rate
W 22mm x D 22mm x H 22mm, 10g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with NB 393, NB 530)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 560mm D: 615mm H: 600mmPacked Weight: 66kg
Product Features
Head only Ice maker
187kg daily production rate
Produces very dry flake ice - water content 12%
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Core ice system - stable Axial load evaporator system
Highly balanced augur double fly system core evaporator
High tech water sump with easy regulation system
Ice level sensor for seamless operations
Smart touch display with with bluetooth and cloud connectivity
XWave app with improved electronics and programming
Stainless steel finish with removable air grid
Requires storage bin model NB 193, NB 393, NB 530, CBT 30 52 AMCD cover (required cover when used NB 393/ NB 530)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 565mm D: 640mm H: 635mmPacked Weight: 72kg
Product Features
Head only Ice maker
130kg daily production rate
W 22mm x D 22mm x H 22mm, 10g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model SB 293, NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 765mm D: 615mm H: 650mmPacked Weight: 97kg
Product Features
Head only Ice maker
480kg daily production rate
Produces very dry flake ice - water content 12%
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Core ice system - stable Axial load evaporator system
Highly balanced augur double fly system core evaporator
High tech water sump with easy regulation system
Ice level sensor for seamless operations
Smart touch display with with bluetooth and cloud connectivity
XWave app with improved electronics and programming
Stainless steel finish with removable air grid
Requires storage bin model NB 530, NB 948, CBT 48 EAMCD cover (required cover when used NB 948)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 535mm D: 619mm H: 891mmPacked Weight: 58kg
Product Features
70kg daily production rate
25kg storage bin capacity
W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX model uses hydrocarbon R290 refrigerant gas
XSafe - Natural Sanitation System
Ice evaporator stainless steel auger
Simple, reliable electromechanic controls
Built-in storage bin
Easy access front condenser air filter for easy clean
Resistant stainless steel exterior
External indicator lights to show operation status and maintenance alert
Includes removable air filter, ice scoop, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 950mm D: 605mm H: 872mmPacked Weight: 79kg
Product Features
135kg daily production rate
44kg storage bin capacity
W 16mm x D 15mm dia x H 7 - 8mm, 1g ice cube
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX model uses hydrocarbon R290 refrigerant gas
XSafe - Natural Sanitation System
Ice evaporator stainless steel auger
Simple, reliable electromechanic controls
Built-in storage bin
Easy access front condenser air filter for easy clean
Resistant stainless steel exterior
External indicator lights to show operation status and maintenance alert
Includes removable air filter, ice scoop, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 565mm D: 640mm H: 683mmPacked Weight: 86kg
Product Features
Head only Ice maker
280kg daily production rate
W 28mm x D 22mm x H 28mm, 15g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
One touch button for easy cleaning
T304 grade stainless steel exterior
Auto-alert indicator lights to show operation status and maintenance
Requires storage bin model SB 293, NB 193, NB 393, NB 530 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393, NB 530)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 565mm D: 640mm H: 635mmPacked Weight: 78kg
Product Features
Head only Ice maker
215kg daily production rate
W 22mm x D 22mm x H 22mm, 10g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model SB 293, NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with SB 293, NB 393)
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 670mm D: 595mm H: 983mmPacked Weight: 76kg
Product Features
68kg daily production rate
33kg storage bin capacity
30mm dia x H 30mm, 25g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
PWD-Progressive water discharge pumps excess water up to 15 meters
Horizontal Ice evaporator spray-system technology
Simple, reliable electromechanic controls
Built-in storage bin
Resistant stainless steel exterior
Easy access front ON-OFF switch
Routine maintenance visible alarm light on front panel
Ergonomically designed ice storage access with disappearing door and door closing movement dampening system
Front access condenser air filter, removable and washable
Includes removable air filter, ice scoop, water and drain hose
Optional adjustable feet available
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
Dimensions
W: 765mm D: 640mm H: 780mmPacked Weight: 113kg
Product Features
Head only Ice maker
437kg daily production rate
W 22mm x D 22mm x H 22mm, 10g ice cubes
Air cooled version
Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
EcoX hydrocarbons R290 refrigerant gas
XSafe - Natural Sanitation System
Vertical evaporator spray-system technology
Top air discharge - suitable for narrown space installation
Front evaporator access for easy servicing
Easy internal cleaning with internal
Remote service support capability with X Wave app
Requires storage bin model NB 530, NB 948 with CBT 48 EAMCD cover (required cover when used with NB 948), UBH 1100
Includes removable air filter, water & drain hose
All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.