Pizza prep fridges for pizzerias, cafes and venues building pizza to order — refrigerated prep counters with a chilled topping well across the top and cold storage below, so your sauce, cheese and toppings sit within arm's reach at safe temperature through a full service. This range spans compact two-door benches through to three-door units with deep saladette pans, and includes counters configured for salad and sandwich prep as well. For the wider category, browse all countertop prep fridges or step up to our full commercial refrigeration range.
Who pizza prep counters are for
If you assemble food on a line — pizza, salads, sandwiches, burgers — a refrigerated prep counter pays for itself in speed. Pizzerias run them as the heart of the make line: dough on the bench, toppings in the well, finished pizza straight to the oven. Cafes and quick-service venues use the same format for salads and sandwiches, holding prepped ingredients cold and visible so staff build orders without trips to the walk-in. Caterers and food trucks lean on the under-counter storage to carry a full day's mise en place in one footprint. In an Australian kitchen that climbs past 30°C on a busy summer night, keeping toppings below 5°C on the bench is a food-safety requirement, not a nicety.
What's in scope
Two-door pizza prep counters
The compact workhorse — two refrigerated doors below, a topping well above, in a bench that fits a tight make line. Suits single-oven pizzerias, cafes and food trucks where space is the constraint.
Three-door prep counters
Longer benches with three doors of cold storage and a wider topping rail, built for higher-volume pizza and salad lines that turn over a lot of prepped product through peak service.
Counters with a saladette top
Models with a recessed pan rail across the top — the saladette — sized to standard gastronorm pans so you can drop in toppings, dressings and salad components and swap them out fast. Some run a hinged lid or glass guard to hold the cold and meet hygiene needs on a self-serve or open line. These configurations cross over into salad bar fridges for buffet and self-service setups.
How to choose a pizza prep fridge in three steps
Getting the right counter comes down to three questions, answered in order.
Step 1 — Measure your bench length
The counter has to fit your make line without blocking traffic to the oven. Measure the run of bench you can give it, then match that to a two- or three-door model. Buy the length your line needs, not the biggest unit that fits — an oversized counter wastes both floor space and the energy to chill it.
Step 2 — Count your topping pans
Work out how many ingredients you hold on the line at once and how often you refill them. That sets the number and depth of gastronorm pans you need in the well. A busy pizza line with a dozen toppings needs a wider rail and deeper pans than a cafe running four salad components — size the well to your menu, then check the under-counter doors hold a service's worth of backup stock.
Step 3 — Check the refrigeration spec
Confirm the unit holds the well and the cabinet at safe cold temperature in your kitchen's real conditions, not a showroom's. Look at the listed operating range, whether the well is refrigerated or relies on chilled air from below, and the power requirement — most counters run from a standard 10-amp outlet, but larger three-door units can need a dedicated circuit. Each product page lists the model's specifications.
Planning the whole make line, not just the fridge? Our guide to prep tables, pan layouts and cold rails walks through laying out a station for faster mise en place.
A pizza prep fridge is a refrigerated prep counter with a chilled topping well across the top and cold storage cabinets below. Toppings sit in gastronorm pans in the well at safe temperature within reach of the make line, while sauce, cheese and backup stock stay cold in the doors underneath — so staff can build pizzas to order without leaving the bench.
What's the difference between a pizza prep fridge and a salad prep fridge?
They share the same format — a refrigerated counter with a topping well over under-counter storage — and many units suit both jobs. The difference is usually the well configuration: pizza counters often run a wider rail for more toppings, while salad and sandwich counters may use a hinged lid or glass guard. Choose by your menu and how many pans you need on the line, not by the label.
What temperature should a pizza prep fridge run at?
Under Australian food-safety guidance, cold food should be held at or below 5°C, so a prep counter is built to keep both the topping well and the cabinet in that range. In a hot kitchen the well is the part that struggles, so keep pans topped up but not overfilled above the cold line, and close any lid or guard between rushes to hold the temperature.
How many doors do I need on a pizza prep counter?
Match the doors to your bench length and storage needs. A two-door counter suits a single-oven pizzeria, a cafe or a food truck where space is tight; a three-door counter gives a longer topping rail and more under-counter storage for higher-volume lines that turn over a lot of prepped product through service.
Does the topping well need its own refrigeration?
It depends on the model. Some counters refrigerate the well directly; others chill it with cold air drawn from the cabinet below. Both can hold food safely, but in a warm Australian kitchen a directly refrigerated well copes better through a long, busy service — check each product's specification for how its well is cooled.
Can I use a pizza prep fridge for salads and sandwiches?
Yes. The refrigerated-counter format works for any build-to-order line — salads, sandwiches, burgers, poke bowls — because the chilled well holds prepped ingredients within reach. Many of the counters in this range are sold for salad and sandwich prep as much as pizza. If your menu is salad-led, our undercounter fridges are worth a look for extra cold backup storage near the line.
Do you deliver pizza prep fridges across Australia?
Yes. Commercial Kitchen Store ships nationwide, and Australian-based phone support is available on 1300 111 901 if you need help sizing a counter to your make line. For cover details, see our warranty and service information.
The Atosa Three Door Pizza table is a compact and heavy duty unit ideal for catering and busy kitchens, designed for preparing and topping pizzas. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel top and spacious marble prep area, ideal for pizza. The lower compartment offers insulated cold storage with 3 self-closing doors, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility.
Please note: the unit features a manual defrosting system. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 380L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Heavy duty stainless steel top prep area
All fitted with European parts Compressor
Aspera compressor
Working Temp: +2 to +8°C
Ambient Temp: 43°C
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static Cooling System
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
3 Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
ESL 3853 can fit GN Pans
GN pans & Lids are not included
Net Weight 170Kg
Dimensions: 1365mmW x 700D x 1025H
Power Requirements: 220V 50Hz; 270W
Dimensions: 1365(W) x 700(D) x 1025(H)mmWarranty: 48 Months Parts & 24 Labour
The Atosa Three Doors Table Saladette is a compact and heavy duty unit ideal for catering and busy kitchens. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel top and marble prep area. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility. Please note: the unit features a manual defrosting system. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 380L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Heavy duty stainless steel top
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system take note
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
GN I pans & Lids not included
Net Weight 90Kg
Dimensions: 1365mmW x 700D x 880H
Power Requirements: 220V 50Hz; 270W; 2A
Dimensions: 1365(W) x 700(D) x 943(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 380L
Width: 1365mm
Finish: Stainless Steel
Depth: 700mm
The Atosa Two Doors Open Top Saladette is a compact and heavy duty unit ideal for catering and busy kitchens, designed for the preparation of sandwiches, salads, and more. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel prep area. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails, with the compressor and condenser situated at the bottom to allow the motor to breathe. Arrives with 4 castors installed for easy mobility.
Please note: it is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 300L
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
Working Temp: +2 to +8°C
Ambient Temp: 43°C
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
ESL 3831 fits 5x 1/3 GN Pans
ESL 3832 fits 6 x 1/3 GN Pans
GN pans & Lids not included
Net Weight 68Kg
Dimensions: 900mmW x 700D x 1040H
Power Requirements: 220V 50Hz; 250W
Dimensions: 900(W) x 700(D) x 1105(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 900mm
Finish: Stainless Steel
Depth: 700mm
The Atosa Two Doors Pizzatable Marble Top Saladette is a compact and heavy duty unit ideal for catering and busy kitchens, designed for the preparation of sandwiches, salads, and more. Engineered for optimal performance in hot environments, this saladette fits standard GN pans (not included) and sports a stainless steel prep area. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and including white Epoxy shelves and stainless steel rails, with the compressor and condenser situated at the bottom to allow the motor to breathe. Arrives with 4 castors installed for easy mobility.
Please note: it is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 300L
Compressor & condenser situated on the bottom, so motor can breathe
Working Temp: 2 to 8°C
Ambient Temp: 43°C
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
ESL 3831 fits 5x 1/3 GN Pans
ESL 3832 fits 6 x 1/3 GN Pans
GN pans & Lids not included
Net Weight 92Kg
Dimensions: 900mmW x 700D x 1100H
Power Requirements: 220V 50Hz; 250W; 2A
Dimensions: 900(W) x 700(D) x 1157(H)mmWarranty: 48 Months Parts & 24 Labour
The Atosa Two Doors Sliding Lid Saladette is a compact and well-rounded unit ideal for catering and busy kitchens. Engineered for optimal performance in hot environments, this saladette fits standard GN pans and lids (not included) and has a stainless steel top with marble prep area, ideal for pizza. The lower compartment offers insulated cold storage, the interior and exterior built from hard-wearing stainless steel and includes white Epoxy shelves and stainless steel rails. It offers a static cooling system operating at a temperature of 2°C to 8°C with self-evaporating drainage, and is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives with 4 castors installed for easy mobility. Please note: this unit requires manual defrosting. It is advised to defrost regularly for better maintenance of temperatures.
Product Features:
Capacity: 300L
Performs well in hot environments
High grade stainless steel interior & exterior
Heavy duty marble prep area
Heavy duty stainless steel top
All fitted with European parts Compressor & EBM fan motor
Aspera compressor
Working Temp: +2 to +8°C
43°C ambient working temperature
Gas 134A refrigerant
Insulation foam CH10, ODP zero emissions
Static cooling system
Carel I Dixell Italian digital controls
Self-evaporating drainage
Manual defrosting system take note
We recommend you defrost regularly for better maintenance of temperatures
Compressor & condenser situated on the bottom, so motor can breathe
Unit can be positioned against a wall
Fits Australian GN pans
Self-closing doors
White Epoxy shelves & stainless-steel rails
Comes installed with 4 castors for easy mobility
GN I pans & Lids not included
Net Weight 72Kg
Dimensions: 900mmW x 700D x 888H
Power Requirements: 220V 50Hz; 250W; 2A
Dimensions: 900(W) x 700(D) x 950(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 900mm
Finish: Stainless Steel
Depth: 700mm
The Atosa 2 Door Refrigerated Pizza Table is a pizza prep station that is equipped with cold storage and a generous work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 300L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX1500 (optional)
Net Weight 209Kg
Dimensions: 1510mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 270W; 2.2A
Dimensions: 1510(W) x 800(D) x 1000(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 300L
Width: 1510mm
Finish: Stainless Steel
Depth: 800mm
The Atosa Single Door Refrigerated Pizza Table with Drawers is a compact pizza prep station that is equipped with cold storage and a sizeable work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 180L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX1500 (optional)
Net Weight 246Kg
Dimensions: 1510mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 260W; 2.2A
Dimensions: 1510(W) x 800(D) x 1000(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 180L
Width: 1510mm
Finish: Stainless Steel
Depth: 800mm
The Atosa 3 Door Refrigerated Pizza Table is a pizza prep station that is equipped with cold storage and a generous work surface. It boasts a stainless steel interior and exterior, as well as a sturdy granite countertop ideal for working dough. Designed to keep products cool in even the hottest kitchens, the cooling unit is fitted with insulation foam, as well as with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixell digital controller
Can fit in VRX2000 (optional)
Net Weight 267Kg
Dimensions: 2010mmW x 800D x 1000H
Power Requirements: 220V 50Hz; 330W
Dimensions: 2010(W) x 800(D) x 1000.5(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 560L
Width: 2010mm
Finish: Stainless Steel
Depth: 800mm
The FED-X XSS7C18S3V-6D is a 400-litre six-drawer refrigerated sandwich and salad prep fridge designed for high-volume commercial kitchens that need fast, organised cold ingredient access at the point of preparation. Six full-depth drawers replace traditional doors, keeping the prep surface clear while allowing rapid retrieval without a wide door swing in tight kitchen layouts.Why operators choose the XSS7C18S3V-6D
Six heavy-duty drawers — organise ingredients by station; no door swing needed in tight kitchen runs.
8 × 1/3 GN pan capacity up to 150mm deep — accommodates a full sandwich or salad mise-en-place in the raised display top.
+2 to +8°C operating range — holds safe service temperatures in kitchens up to 43°C ambient with 60% RH.
R290 natural refrigerant — low GWP refrigerant, HFC and CFC free 60mm foam insulation throughout the body.
Fan-forced cooling with Cubigel compressor & Dixell digital controller — consistent cabinet temperature with user-friendly digital display and rapid recovery rate.
Stainless steel interior & exterior with rounded corners — easy cleaning, durable finish rated for commercial use.
Heavy-duty castors with front wheel brakes — safe repositioning on the floor, locks securely in service position.
Specifications
Brand
FED-X
Model / MPN
XSS7C18S3V-6D
Type
Refrigerated Sandwich & Salad Prep Fridge
Configuration
6-Drawer
Capacity (Net)
400 L
GN Pan Capacity
8 × 1/3 GN pans up to 150mm deep
Temperature Range
+2 to +8°C
Refrigerant
R290
Compressor
Cubigel
Controller
Dixell digital
Max Ambient Temperature
43°C, 60% RH
Cooling System
Fan forced
Power
240V / 50Hz / 10A / 320W
Power Type
Electric
Construction
Stainless Steel interior & exterior
Insulation
60mm HFC/CFC-free foam body
Product Dimensions (W × D × H)
1795 × 700 × 1406mm
Packed Dimensions (W × D × H)
1830 × 730 × 1160mm
Net Weight
130 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice)
Venue suitability: Suited to sandwich bars, cafés, pizza restaurants, burger kitchens, sushi bars, and fast-food prep lines that require high-volume cold ingredient access at the bench. The drawer configuration is ideal for busy stations where the chef needs rapid access to multiple ingredient sections without a full door open. The 1795mm width accommodates a standard commercial prep bench footprint. Browse the full range in our Salad Bar Fridges collection, or see all equipment from FED-X.Installation & delivery: Plug-in electric connection (240V / 10A standard outlet). Position away from direct heat sources and allow adequate airflow to the condenser. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XSS7C18S3V-6D?The net volume is 400 litres, distributed across six drawers, with the refrigerated display top holding up to 8 × 1/3 GN pans up to 150mm deep.What refrigerant does this unit use?It uses R290, a natural hydrocarbon refrigerant with a very low global warming potential. The body uses 60mm HFC and CFC-free foam insulation.What is the temperature range?The unit operates at +2 to +8°C and is designed for ambient environments up to 43°C at 60% relative humidity — tropicalised for Australian commercial kitchen conditions.What electrical connection is required?The XSS7C18S3V-6D requires a standard 240V / 50Hz / 10A single-phase connection, drawing 320W at full load. No special electrical work is needed for most commercial premises.What is the warranty on this unit?FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only coverage when the product is registered within 14 days of invoice date.
FED-X Six Drawer Salad Prep Fridge - XGNS1300D-6D This Salad bar fridge prep is the ideal choice for small and medium businesses that need performance, professional-grade commercial refrigeration. With 3 solid Stainless steel doors, it's compact in size so you can make the most of your workspace and kitchen. In addition this unit features a Stainless steel hinged lid on top which opens up to a storage area that holds 8 x 1/6th Gn pans so you have easy access to your ingredients, garnishes, toppings, sauces, and condiments to streamline your food preparation. With its compact size and generous compartments, it is ideal for restaurants, cafes, clubs, pubs, bars, and offices. The heavy duty magnetic door seals are designed to ensure optimal cooling. Constructed using durable and easy-to-clean stainless steel inside and out. The internal area features rounded corners, making it super easy to clean this compact unit. This unit is GN pan compatible, comes with a single shelf but you can opt for additional slides so you Gn pans just slide in and out. This worktop bench fridges’ build quality, specifications and functionality meet food, health, and safety standards. *Unit can be placed against the wall. *Pans are not included. *Pan and pan cover must be used to ensure the correct operating temperature. Net Capacity: 392L
Temperature range: -2 ~ +8°C & Ambient Temperature: 32°C & RH: 60%
Cooling System: Static cooling Compressor: Embraco/Secop Controller: Dixell Weight loading per shelf: 40kg Refrigerant: R290 Dimensions (Internal): 1295mm W x 595mm D x 455mm H MAIN FEATURES Stainless steel interior and exterior with rounded corners for easy cleaning Stainless steel integrated lid Pan and pan cover must be used to ensure correct operating temperature 8 x GN1/6 Pan slots (Pans and lids are not included) GN1/1 shelf per door Replaceable magnetic door seals User friendly Digital controls Heavy duty castors Unit can be placed against the wall 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoiceProduct Dimensions: 1368(W) x 700(D) x 1020(H)mmPower: 240V; 240W/1.6A
Specifications
Capacity: 392L
Width: 1368mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XSS7C13S2V-4D is a four-drawer commercial sandwich and salad prep counter refrigerator designed for high-volume prep kitchens. With a 259 L net capacity, raised GN pan rail holding 7×1/3 GN pans, and four heavy-duty pull-out drawers, it keeps ingredients cold and within arm's reach throughout a busy service.
Why operators choose the XSS7C13S2V-4D
Four heavy-duty drawers — smooth-action pull-out drawers replace hinged doors for faster access during service, reducing cold-air loss and improving workflow speed.
7×1/3 GN pan capacity — raised rear rail holds GN pans up to 150mm deep at countertop level, ready for immediate plating without transfer.
Fan-forced Cubigel compressor system — Cubigel compressor with Dixell digital controller maintains +2 to +8°C in ambient conditions up to 43°C — tropicalised for Australian kitchens.
R290 natural refrigerant — environmentally responsible hydrocarbon refrigerant with zero ODP and very low GWP; HFC- and CFC-free 60mm foam insulation throughout.
Display top holds temp up to 4 hours — pre-chilled GN pan zone retains temperature for up to 4 hours, supporting menu prep shifts without power dependency.
Specifications
Brand
FED-X
Model / MPN
XSS7C13S2V-4D
Type
Salad/Sandwich Prep Bar Fridge
Drawers
4
Capacity (Net)
259 L
Capacity (Gross)
282 L
GN Pan Compatibility
7×1/3 GN Pan up to 150mm deep
Temperature Range
+2 to +8°C
Ambient Temperature (Max)
43°C, 60% RH
Cooling System
Fan forced
Compressor
Cubigel
Controller
Dixell digital
Refrigerant
R290
Insulation
60mm HFC- and CFC-free foam
Fans
Ebm-papst evaporator & condenser
Construction
Stainless steel interior & exterior, rounded corners
Power
240V; 50Hz; 10A; 320W
Product Dimensions (W×D×H)
1360 × 700 × 1406mm
Packed Dimensions (W×D×H)
1390 × 730 × 1160mm
Net Weight
104 kg
Mobility
Heavy-duty castors with front wheel brakes
Weight Loading Per Shelf
40 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for pizza and sandwich restaurants, cafes, delis, hotel kitchens, and any operation where speed of ingredient access during service is critical. The four-drawer configuration suits prep lines where staff work along the counter without breaking stride to open full-height doors.
Browse the full Salad Bar Fridges collection or explore all FED-X commercial refrigeration for companion equipment.
Installation & delivery: Arrive fully assembled on castors — roll into position, level, and connect to a standard 10A GPO. No specialist installation required. Dispatched Australia-wide.
Frequently asked questions
Q: What GN pan sizes fit the display rail?A: The XSS7C13S2V-4D accommodates 7×1/3 GN pans up to 150mm deep in the raised countertop rail, making it compatible with standard salad, topping, and ingredient pans used across most commercial kitchens.
Q: Can this unit operate in hot Australian kitchens?A: Yes. The unit is tropicalised for Australian conditions and rated for ambient temperatures up to 43°C at 60% relative humidity, covering the vast majority of Australian commercial kitchen environments.
Q: What refrigerant does the XSS7C13S2V-4D use?A: It uses R290, a natural hydrocarbon refrigerant with zero ozone depletion potential and very low global warming potential — an environmentally responsible choice that also delivers efficient cooling performance.
Q: How long does the display top maintain temperature if power is interrupted?A: When pre-chilled, the display top section can hold its temperature for up to 4 hours, giving operators a buffer during brief power interruptions or at the end of a service shift.
Q: What electrical supply does this unit need?A: The XSS7C13S2V-4D requires a standard 240V/50Hz supply drawing 10A at 320W — a standard 10-amp GPO with no additional electrical work required in most commercial premises.
The FED-X XGNS450S is a one-door salad and sandwich prep bar fridge designed for high-volume commercial kitchens that demand consistent cold-chain performance under constant access. Built around a fan-assisted static cooling system, it delivers even temperature distribution with the humidity benefits of static airflow — protecting fresh produce quality and reducing energy waste compared to full frost-free units.
Why operators choose the XGNS450S
Fan-assisted static cooling — uniform temperature recovery after every door open, reduced frost build-up, optimal humidity for fresh produce
109L gross capacity with GN1/1 shelving — accommodates full GN inserts for mise en place and service-line efficiency
Integrated stainless steel cutting board — saves bench space; purpose-built for salad prep workflow (S Series)
Replaceable magnetic door seals — easy field replacement, reduces maintenance downtime
Digital controls & heavy-duty castors — intuitive temperature management with full bench mobility for cleaning and reconfiguration
Specifications
Brand
FED-X
Model / MPN
XGNS450S
Type
Salad / Sandwich Prep Bar Fridge
Gross Capacity
109 L
Net Capacity
90 L
Doors
1 (Hinged)
Shelving
1 x GN1/1 shelf per door
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C at 60% RH
Refrigerant
R600A
Cooling System
Fan-assisted static
Construction
Stainless steel interior & exterior with rounded corners
Cutting Board
Integrated (S Series)
Power
240V, 120W / 10A
Product Dimensions (W x D x H)
435 x 700 x 898mm
Packed Dimensions (W x D x H)
730 x 465 x 1050mm
Net Weight
37 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XGNS450S suits cafes, sandwich bars, salad restaurants, hotel kitchens, and catered venues where fresh ingredients need fast-access refrigeration at the point of preparation. Its compact 435mm footprint makes it ideal for tight prep lines without sacrificing GN-standard storage. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection for complementary refrigeration solutions.
Installation & delivery: The XGNS450S is a plug-in electric unit (240V / 10A) requiring no special installation. Note: GN pans and pan covers must be used to ensure correct operating temperature — pans are not included. Dispatched Australia-wide.
Frequently asked questions
What is the capacity of the XGNS450S?The XGNS450S has a gross volume of 109L and a net volume of 90L, with 1 x GN1/1 shelf per door for organised mise en place storage.
What temperature range does the XGNS450S maintain?It operates between +2 and +8°C, suitable for fresh produce, prepped salads, and sandwich fillings requiring constant cold-chain conditions.
Does the XGNS450S require special installation?No — it is a standard 240V / 10A plug-in unit. Heavy-duty castors allow repositioning without tools. Ensure adequate ventilation clearance around the condenser.
Are GN pans included with the XGNS450S?No. GN pans and pan covers must be sourced separately. Using pans and covers is required to maintain the correct operating temperature inside the unit.
What warranty does the XGNS450S carry?FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only coverage, provided the unit is registered within 14 days of invoice date.
The Atosa EPF3480 is a refrigerated pizza prep table that gives a busy pizzeria 485 litres of chilled storage, two doors plus a six-drawer bank and a granite work surface, with a refrigerated topping rail across the top for ready-to-grab ingredients.
Why operators choose the EPF3480
485 L of cold storage with two doors and drawers — base ingredients, dough and prepped toppings all stay chilled and within reach under one bench.
Refrigerated topping rail — accepts 600 x 400mm racks and trays (not included) so the line keeps moving through service.
Granite work surface — a hard-wearing top built for rolling and stretching dough.
Built for hot kitchens — rated to a 43°C ambient working temperature and holding a -2°C to +8°C interior, with R134A refrigerant and insulation foam.
European refrigeration parts on castors — Aspera compressor, EBM fan motor and a Carel or Dixell digital controller, mounted on castors for easy cleaning and repositioning.
Specifications
Brand
Atosa
Model / MPN
EPF3480
Type
Refrigerated pizza prep table
Capacity
485 L
Doors
2
Refrigerant
R134A
Temperature range
-2°C to +8°C
Ambient working temperature
43°C
Tray / rack compatibility
600 x 400mm (not included)
Work surface
Granite
Construction
Stainless steel interior and exterior
Power
220V; 260W; 2.2A
Product dimensions
2010(W) x 800(D) x 1000.5(H)mm
Packed dimensions
2064(W) x 854(D) x 1051(H)mm
Net weight
360 kg
Mobility
Castors fitted as standard
Warranty
48 months parts, 24 months labour
Venue suitability: Built for pizzerias, restaurants, cafes, pubs and clubs, quick-service kitchens and bakeries that need high-volume chilled prep in one mobile bench. For other refrigerated prep options, browse our Salad Bar Fridges range.
Installation & delivery: Arrives complete on castors, plugs into a standard outlet and is ready to position on site. Dispatched Australia-wide.
Frequently asked questions
How much refrigerated storage does the EPF3480 hold? It holds 485 litres across two doors plus a six-drawer bank under the granite work surface.
What size trays does the topping rail take? The refrigerated rail accepts 600 x 400mm racks and trays, which are not included.
What refrigerant does it use and how cold does it run? It uses R134A refrigerant and holds an interior temperature of -2°C to +8°C, rated to work in ambient temperatures up to 43°C.
Is it mobile? Yes — castors are fitted as standard, so it can be repositioned and rolled out for cleaning.
What warranty is included? The EPF3480 is covered by 48 months parts and 24 months labour warranty.
The Atosa 2-Door Mega Top Sandwich Prep Table Refrigerator is a high-performance and versatile solution designed to enhance efficiency in busy commercial kitchens. Featuring a spacious prep area with a durable cutting board and a mega top layout for multiple food pans, it's perfect for preparing sandwiches, salads, and more.
Its two-door refrigerated cabinet provides ample cold storage, keeping ingredients fresh and easily accessible. Constructed with a heavy-duty stainless steel exterior and interior, this prep table is built for durability and ensures easy cleaning and maintenance.
Designed for optimal performance, it comes with an energy-efficient refrigeration system, digital temperature controls, and a self-closing door mechanism to maintain consistent cooling. Whether you operate a deli, café, or restaurant, the Atosa 2-Door Mega Top Sandwich Prep Table Refrigerator is an essential addition to keep your kitchen running smoothly.
📏 Dimensions: 1530(W) x 863(D) x 1197(H)mm
1152mm wide
216L
Internal dimensions: 587 x 658 x 558mm
5 x 1/3 size pans (not supplied)
Monoblock system with removable condenser filter for easy cleaning
Supplied on 150mm castors (feet optional)
Nylon cutting board (increases overall depth to 830mm)
Sliding polycarbonate pan covers
Supplied with spacer bars for 1/6 and 1/9 size pans
Removable well, for easy cleaning in places normally difficult to clean
304 grade stainless interior and exterior
High density 75mm thick insulation
Doors take 2 x 1/1 GN or 2/1 GN pan lengthways
Corrosion resistant coating on evaporator coil
Rounded internal corners for easy cleaning
43°C ambient temperature
Self closing doors
R290 gas
Manufacture code: M-PW10H
1815mm wide
416L
Internal dimensions: 1249 x 658 x 558mm
9 x 1/3 size pans (not supplied)
Monoblock system with removable condenser filter for easy cleaning
Supplied on 150mm castors (feet optional)
Nylon cutting board (increases overall depth to 830mm)
Sliding polycarbonate pan covers
Supplied with spacer bars for 1/6 and 1/9 size pans
Removable well, for easy cleaning in places normally difficult to clean
304 grade stainless interior and exterior
High density 75mm thick insulation
Doors take 2 x 1/1 GN or 2/1 GN pan lengthways
Corrosion resistant coating on evaporator coil
Rounded internal corners for easy cleaning
43°C ambient temperature
Self closing doors
R290 gas
Manufacture code: M-PW20HH
2476mm wide
656L
Internal dimensions: 1911 x 658 x 558mm
12 x 1/3 size pans (not supplied)
Monoblock system with removable condenser filter for easy cleaning
Supplied on 150mm castors (feet optional)
Nylon cutting board (increases overall depth to 830mm)
Sliding polycarbonate pan covers
Supplied with spacer bars for 1/6 and 1/9 size pans
Removable well, for easy cleaning in places normally difficult to clean
304 grade stainless interior and exterior
High density 75mm thick insulation
Doors take 2 x 1/1 GN or 2/1 GN pan lengthways
Corrosion resistant coating on evaporator coil
Rounded internal corners for easy cleaning
43°C ambient temperature
Self closing doors
R290 gas
Manufacture code: M-PW30HHH
2476mm wide
656L
Internal dimensions: 1911 x 658 x 558mm
12 x 1/3 size pans (not supplied)
Monoblock system with removable condenser filter for easy cleaning
Supplied on 150mm castors (feet optional)
Nylon cutting board (increases overall depth to 830mm)
Sliding polycarbonate pan covers
Supplied with spacer bars for 1/6 and 1/9 size pans
Removable well, for easy cleaning in places normally difficult to clean
304 grade stainless interior and exterior
High density 75mm thick insulation
Supplied with 3 sets of drawers instead of doors
Corrosion resistant coating on evaporator coil
Rounded internal corners for easy cleaning
43°C ambient temperature
R290 gas
Manufacture code: PW30-DRAWERS
The FED-X XGNS900S is a refrigerated two-door salad and sandwich prep fridge designed to keep ingredients chilled and ready for service in high-throughput commercial kitchens. With a 240 L gross capacity, static cooling, and a multi-configuration GN pan layout, it handles busy prep stations in cafés, delis, restaurants, and catering operations.
Why operators choose the XGNS900S
240 L capacity with flexible GN layout — accommodates 1x GN1/1 + 3x GN1/3 + 3x GN1/6 pans (pans and lids not included), giving prep cooks maximum ingredient variety at the line.
Consistent +2°C to +8°C temperature — Dixell digital controller and Cubigel compressor maintain precise chilling even in 32°C ambient environments.
Full stainless steel interior and exterior — rounded corners eliminate hidden grime pockets and make end-of-service wipe-down fast and thorough.
Integrated cutting boards and digital controls — keeps the prep surface self-contained; replaceable magnetic door seals maintain cold integrity over time.
Can be placed against the wall — ideal for tight galley-style kitchen layouts where space efficiency matters.
Specifications
Brand
FED-X
Model / MPN
XGNS900S
Type
Salad/Noodle/Sandwich Prep Bar Fridge
Capacity (Gross)
240 L
Capacity (Net)
180 L
Temperature Range
+2°C to +8°C
Ambient Temperature
32°C / 60% RH max
Cooling System
Static
Compressor
Cubigel
Controller
Dixell digital
Doors
2 hinged doors
GN Pan Configuration
1x GN1/1 + 3x GN1/3 + 3x GN1/6 (pans not included)
Power Supply
240V / 10A / 240W
Power Type
Electric
Construction
Stainless Steel interior & exterior, rounded corners
Product Dimensions
903W x 700D x 898H mm
Packed Dimensions
1100W x 730D x 1050H mm
Net Weight
100 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XGNS900S suits cafés, sandwich bars, sushi trains, delis, hotel kitchens, and catering prep areas that need reliable refrigerated ingredient access at the pass. It performs well in warm kitchens thanks to its 32°C ambient rating.
Browse the full Salad Bar Fridges range or explore all FED-X refrigeration equipment available at Commercial Kitchen Store.
Installation & delivery: The XGNS900S arrives fully assembled and is ready to plug in to a standard 10A GPO. Position on the heavy-duty castors and connect to power. Dispatched Australia-wide.
Frequently asked questions
What temperature does the XGNS900S operate at?The unit maintains a temperature range of +2°C to +8°C and is rated for ambient environments up to 32°C at 60% relative humidity.
What GN pans fit in the XGNS900S?The XGNS900S accepts 1x GN1/1 + 3x GN1/3 + 3x GN1/6 pans. Pans and lids are not included and must be purchased separately.
What is the capacity of this salad prep fridge?The gross capacity is 240 L, with a net (usable) capacity of 180 L. This provides ample room for a full ingredient selection across a busy service.
What power supply does the XGNS900S require?It requires a standard 240V / 10A single-phase supply and draws 240W. A standard 10A GPO is sufficient — no dedicated circuit or hardwiring required.
What warranty does the XGNS900S carry?FED-X covers the XGNS900S with 2 Years Parts & Labour plus an additional 2 Years Parts Only, provided the product is registered within 14 days of invoice.
Pizza Prep Table, 6x 1/3 Top Pans, 1 Solid Swing Door
External Dimensions (W × D × H): 1133 × 854 × 1133 mm
Note: Depth does not include 26 mm for rear bumpers and 42mm for cutting board overhang.
Gross Volume: 323 L
Supplied Shelves: 2.0
Shelf Size (L × D): 635 x 705 mm
Internal Net Height: 550 mm
Product Weight: 139 kg
Packaged Weight: 150 kg
Packaged Dimensions (W × D × H): 1296 x 966 x 1245 mm
Supplied With: Heavy duty lock-in-place ⌀ 127 mm castors (146 mm height)
Door Description: 1 Solid Swing Door
Door Opening: Right hinged
Exterior Construction: Stainless steel front, top & lids, aluminium sides and rear
Interior Construction: Clear coated aluminium, stainless steel base
Air Intake Position: Front
Ventilation Position: Front
Clearance Required: Zero back and sides
Cord Length: 3.35 m
Standard With Locks: Not Standard (SPEC3 option)
Temperature Range: 0.5 : 5°C
Refrigerant: R290
Electrical: 220-240V/50-60Hz/1
Amps: 1.8 A
Watts: 414 W
Defrost Type: Auto
Cutting Board (L × D): 1131 x 496 mm
Top Pans Supplied (Depth): 6x 1/3 GN (150) mm
Pizza Prep Table, 9x 1/3 Top Pans, 2 Solid Swing Doors
External Dimensions (W × D × H): 1709 × 854 × 1133 mm
Note: Depth does not include 26 mm for rear bumpers and 42mm for cutting board overhang.
Gross Volume: 583 L
Supplied Shelves: 4.0
Shelf Size (L × D): 601 x 712 mm
Internal Net Height: 550 mm
Product Weight: 196 kg
Packaged Weight: 207 kg
Packaged Dimensions (W × D × H): 1880 x 966 x 1245 mm
Supplied With: Heavy duty lock-in-place ⌀ 127 mm castors (146 mm height)
Door Description: 2 Solid Swing Doors
Exterior Construction: Stainless steel front, top & lids, aluminium sides and rear
Interior Construction: Clear coated aluminium, stainless steel base
Air Intake Position: Front
Ventilation Position: Front
Clearance Required: Zero back and sides
Cord Length: 3.35 m
Standard With Locks: Not Standard (SPEC3 option)
Temperature Range: 0.5 : 5°C
Refrigerant: R290
Electrical: 220-240V/50-60Hz/1
Amps: 1.8 A
Watts: 414 W
Defrost Type: Auto
Cutting Board (L × D): 1709 x 496 mm
Top Pans Supplied (Depth): 9x 1/3 GN (150) mm
Pizza Prep Table, 12x 1/3 Top Pans, 3 Solid Swing Doors
External Dimensions (W × D × H): 2369 × 854 × 1133 mm
Note: Depth does not include 26 mm for rear bumpers and 42mm for cutting board overhang.
Gross Volume: 875 L
Supplied Shelves: 6.0
Shelf Size (L × D): Left & Right: 600 x 712. Central: 648 x 712 mm
Internal Net Height: 550 mm
Product Weight: 262 kg
Packaged Weight: 273 kg
Packaged Dimensions (W × D × H): 2540 x 966 x 1245 mm
Supplied With: Heavy duty lock-in-place ⌀ 127 mm castors (146 mm height)
Door Description: 3 Solid Swing Doors
Exterior Construction: Stainless steel front, top & lids, aluminium sides and rear
Interior Construction: Clear coated aluminium, stainless steel base
Air Intake Position: Front
Ventilation Position: Front
Clearance Required: Zero back and sides
Cord Length: 3.35 m
Standard With Locks: Not Standard (SPEC3 option)
Temperature Range: 0.5 : 5°C
Refrigerant: R290
Electrical: 220-240V/50Hz/1
Amps: 3.3 A
Watts: 759 W
Defrost Type: Auto
Cutting Board (L × D): 2369 x 496 mm
Top Pans Supplied (Depth): 12x 1/3 GN (150) mm
Prep Table, 12x 1/6 Top Pans, 1 Solid Swing Door, Removable lids
External Dimensions (W × D × H): 702 × 867 × 961 mm
Note: Depth does not include 26 mm for rear bumpers. Height with lid closed.
Gross Volume: 184 L
Supplied Shelves: 2.0
Shelf Size (L × D): One 590 x 488 + One 590 x 349 mm
Internal Net Height: 535 mm
Product Weight: 91 kg
Packaged Weight: 102 kg
Packaged Dimensions (W × D × H): 769 x 940 x 1270 mm
Supplied With: Heavy duty lock-in-place ⌀ 127 mm castors (158 mm height)
Door Description: 1 Solid Swing Door
Exterior Construction: Stainless steel front, top & lid, aluminium sides and rear
Interior Construction: Clear coated aluminium, stainless steel base
Air Intake Position: Front
Ventilation Position: Front
Clearance Required: Zero back and sides
Cord Length: 3.35 m
Standard With Locks: Not Standard (SPEC3 option)
Temperature Range: 0.5 : 5°C
Refrigerant: R290
Electrical: 220-240V/50-60Hz/1
Amps: 1.6 A
Watts: 368 W
Defrost Type: Auto
Cutting Board (L × D): 702 x 226 mm
Top Pans Supplied (Depth): 12x 1/6 GN (100) mm