Federal Hospitality Equipment

  • Sale -15%Last stock! Dito Sama Stainless Steel Shredding Disc With S-Blades 6X6 Mm (Can Also Be Used For Chips) DS650078 Dito Sama Stainless Steel Shredding Disc With S-Blades 6X6 Mm (Can Also Be Used For Chips) DS650078

    Dito SamaDito Sama Stainless Steel Shredding Disc With S-Blades 6X6 Mm (Can Also Be Used For Chips) DS650078

    Stainless Steel Shredding Disc With S-Blades 6X6 Mm (Can Also Be Used For Chips) - DS650078 Shredding/Julian TRS & TRK S/S CUTTING DISCS 205MM Dishwasher safe Stainless Steel 205mm diameter cutting surface –16.5% larger than other brands Details: 6x6mmPower:

    $500.00 $425.00 +GST

  • Sale -15% Dito Sama Stainless Steel Shredding Disc With S-Blades 2X8 Mm DS650158 Dito Sama Stainless Steel Shredding Disc With S-Blades 2X8 Mm DS650158

    Dito SamaDito Sama Stainless Steel Shredding Disc With S-Blades 2X8 Mm DS650158

    Stainless Steel Shredding Disc With S-Blades 2X8 Mm - DS650158 Shredding/Julian TRS & TRK S/S CUTTING DISCS 205MM Dishwasher safe Stainless Steel 205mm diameter cutting surface –16.5% larger than other brands Details: 2x8mmPower:

    $500.00 $425.00 +GST

  • Sale -15%Last stock! Prometek Prometec Convection Oven - TD-3NE Main Image Prometek Prometec Convection Oven TD-3NE - Image 2

    TECNODOMTECNODOM Nerino 3 Tray GN 2/3 Bench Top Convection Oven TD-3NE

    The TECNODOM TD-3NE is a bench-top convection oven that brings even, fan-forced baking to compact commercial kitchens, cafes and food trucks where bench space is tight but consistent results matter. It holds three GN 2/3 trays and runs from 30°C to 280°C on a standard 240V single-phase 15A outlet. Why operators choose the TD-3NE Plug-and-go countertop format — runs off a standard 240V 15A outlet, so no three-phase install is needed. 3x GN 2/3 tray capacity — bakes, roasts and reheats multiple trays at once in a small footprint. Global diffusion ventilation — fan-forced air spreads heat evenly across every shelf for consistent browning. 304 stainless steel inside and out — with rounded chamber corners and a Scotch-Brite finish for easy daily cleaning. Simple analogue control — 60-minute timer (with infinite setting) and thermostat to 280°C, plus internal lighting and a cold glass door. Specifications Brand TECNODOM Model / MPN TD-3NE Type Bench Top Convection Oven Series Nerino Tray Capacity 3 x GN 2/3 Temperature Range 30–280°C Construction 304 Stainless Steel inside and out Controls Analogue timer (60 min / infinite) and thermostat Door Cold glass door with removable low-emissivity inner glass Power 240V; 2.8kW; 15A; single phase Product Dimensions 600(W) x 520(D) x 390(H)mm Packed Dimensions 560(W) x 690(D) x 540(H)mm Net Weight 25 kg Certification CE Approved Country of Manufacture China Warranty 1 Year Parts & Labour Venue suitability: Ideal for cafes, bakeries, sandwich bars, food trucks and small commercial kitchens that need reliable fan-forced baking without committing to a full-size three-phase oven. Browse more options in our Convection Ovens range to compare tray capacities and footprints for your venue. Installation & delivery: Plugs into a standard 240V 15A outlet — no special wiring required. Dispatched Australia-wide. Frequently asked questions How many trays does the TD-3NE hold? It holds three GN 2/3 trays, suitable for baking, roasting and reheating in a compact countertop oven. What power supply does it need? The TD-3NE runs on a standard 240V single-phase supply, drawing 2.8kW through a 15A outlet, so it does not require a three-phase connection. What temperature range does it reach? The oven operates from 30°C up to 280°C, controlled by an analogue thermostat. What is the oven made of? It is built from 304 grade stainless steel both inside and out, with rounded chamber corners and a Scotch-Brite external finish for easy cleaning. What warranty does it come with? The TD-3NE is covered by a 1 Year Parts and Labour warranty.

    $1,799.00 $1,529.15 +GST

  • Sale -15%Last stock! Modular Systems SS6-2100R-H single sink bench — front view Modular Systems SS6-2100R-H single sink bench — view 2

    Modular SystemsModular Systems Multipurpose Utility Bench With Sink SS6-2100R-H

    Multipurpose Utility Bench with Sink - SS6-2100R-H 610mm deep 3 drawers Bowl size: 300(W) x 300(D) x 300(H) mm Cabinet comes fully assembled 304 grade Stainless Steel Hygienic and easy to clean 2 Years Parts only Warranty  

    $3,750.00 $3,187.50 +GST

  • Sale -15% Dito Sama Stainless Steel Grating Disc 4 Mm DS653775

    Dito SamaDito Sama Stainless Steel Grating Disc 4 Mm DS653775

    Stainless steel grating disc 4 mm - DS653775 Graating TRS & TRK S/S CUTTING DISCS 205MM Dishwasher safe Stainless Steel 205mm diameter cutting surface –16.5% larger than other brands Details: 4mmPower:

    $400.00 $340.00 +GST

  • Sale -15%Last stock! Dito Sama Stainless Steel Grating Disc For Parmesan And Bread DS653779

    Dito SamaDito Sama Stainless Steel Grating Disc For Parmesan And Bread DS653779

    Stainless steel grating disc for parmesan and bread - DS653779 Grating TRS & TRK S/S CUTTING DISCS 205MM Dishwasher safe Stainless Steel 205mm diameter cutting surface –16.5% larger than other brands Details: for parmesan & chocolatePower:

    $400.00 $340.00 +GST

  • Sale -15%Last stock! Dito Sama Stainless Steel Pressing/Slicing Disc With Corrugated S-Blades (Balanced) 8 Mm DS650162 Dito Sama Stainless Steel Pressing/Slicing Disc With Corrugated S-Blades (Balanced) 8 Mm DS650162

    Dito SamaDito Sama Stainless Steel Pressing/Slicing Disc With Corrugated S-Blades (Balanced) 8 Mm DS650162

    Stainless Steel Pressing/Slicing Disc With Corrugated S-Blades (Balanced) 8 mm - DS650162 Corrugated Pressing/Slicing Details: 8mmPower:

    $500.00 $425.00 +GST

  • Sale -15%Last stock! Dito Sama Dicing Grid 5X5 Mm DS653566

    Dito SamaDito Sama Dicing Grid 5X5 Mm DS653566

    Dicing grid 5x5 mm - DS653566 Details: 5x5 mmPower:

    $500.00 $425.00 +GST

  • Sale -15%Last stock! Dito Sama Dicing Grid 8X8 Mm DS653567

    Dito SamaDito Sama Dicing Grid 8X8 Mm DS653567

    Dicing grid 8x8 mm - DS653567 Details: 8x8 mmPower:

    $500.00 $425.00 +GST

  • Sale -15% Dito Sama Stainless Steel Slicing Disc With S-Blades 3 Mm DS650084 Dito Sama Stainless Steel Slicing Disc With S-Blades 3 Mm DS650084

    Dito SamaDito Sama Stainless Steel Slicing Disc With S-Blades 3 Mm DS650084

    Stainless Steel Slicing Disc With S-Blades 3 mm - DS650084 Slicing Details: 3mmPower:

    $400.00 $340.00 +GST

  • Sale -32% Blizzard SN-280C 280kg/24h Crescent Professional Self-Contained Ice Maker Blizzard SN-280C 280kg/24h Crescent Professional Self-Contained Ice Maker — view 2

    BlizzardBlizzard SN-280C 280kg/24h Crescent Professional Self-Contained Ice Maker

    The Blizzard SN-280C is a professional self-contained crescent ice maker that produces up to 280kg of ice every 24 hours and stores approximately 125kg in its built-in bin. With crescent-cut ice (13 x 30 x 35mm), R404A refrigerant and an air/water condenser option, it is built for high-turnover venues that need a large, dependable ice supply.Why operators choose the SN-280C Up to 280kg/24h output - heavy-duty capacity for busy restaurants, bars and function venues Approx. 125kg bin storage - large on-board reserve to ride out service peaks Crescent ice (13 x 30 x 35mm) - slow-melting, drink-friendly ice that packs efficiently Air or water condenser - flexible siting to suit ventilation or ambient conditions R404A refrigeration - reliable cooling performance under commercial load Stainless steel exterior - durable, hygienic and easy to clean Specifications Brand Blizzard Model / MPN SN-280C Type Self-contained crescent ice maker Ice type Crescent (13 x 30 x 35mm) Ice output Up to 280kg / 24h Bin storage Approx. 125kg Condenser Air / water Refrigerant R404A Power 240V; 1800W; 10A External material Stainless steel Product dimensions 760(W) x 860(D) x 1810(H)mm Packed dimensions 650(W) x 890(D) x 2100(H)mm Net weight 119kg Country of manufacture China Warranty 2 years parts and labour Venue suitability: Aimed at high-demand sites - busy restaurants, hotels, clubs, function centres and catering operations - where the 280kg daily output and 125kg bin keep pace with sustained service. The air/water condenser choice helps in warm plant rooms or poorly ventilated back-of-house. It is more machine than a low-volume cafe needs.Compare more self-contained ice makers or view the full Blizzard range to match capacity to your site.Installation & delivery: Runs on a 240V/10A single-phase outlet and connects to a plumbed water supply; if water-cooled, a drain and water feed are required. Allow clearance for the chosen condenser type. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-280C make per day? It produces up to 280kg of crescent ice every 24 hours, with a built-in bin storing approximately 125kg.What refrigerant does the SN-280C use? It uses R404A and can run with either an air or water condenser to suit your installation.What shape of ice does it make? It produces crescent-cut ice pieces of roughly 13 x 30 x 35mm, which are slow-melting and ideal for drinks service.What power and water does the SN-280C need? It connects to a 240V/10A single-phase outlet and a plumbed water supply; water-cooled installs also need a drain.Does the machine require regular maintenance? Yes. Replace the water filter cartridge every 6 months and descale the unit regularly to protect ice quality and the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

    $8,990.00 $6,113.00 +GST

  • Sale -15%Last stock! Dito Sama Stainless Steel Slicing Disc With S-Blades 8Mm DS650088 Dito Sama Stainless Steel Slicing Disc With S-Blades 8Mm DS650088

    Dito SamaDito Sama Stainless Steel Slicing Disc With S-Blades 8Mm DS650088

    Stainless Steel Slicing Disc With S-Blades 8mm - DS650088 Slicing Details: 8mmPower:

    $400.00 $340.00 +GST

  • Sale -15% F.H.E Pull Down Heat Lamp Antique Copper HYWAL04

    F.H.EF.H.E Pull Down Heat Lamp Antique Copper HYWAL04

    Pull down heat lamp Antique Copper HYWAL04 Length adjustable 1.5 metres On/off switch on lamp shade HEATING LAMPS NEED TO BE INSTALLED BY A CERTIFIED ELECTRICIAN FAILURE TO DO SO WILL VOID YOUR WARRANTY 1 Year Parts and Labour WarrantyPower: 240V; 250W; 10A outlets required

    $125.00 $106.25 +GST

  • Sale -15% ItaliaCool Open Chiller With 4 Shelves TDVC60-CA-150 ItaliaCool Open Chiller With 4 Shelves TDVC60-CA-150 dimensions

    ItaliaCoolItaliaCool Open Chiller With 4 Shelves TDVC60-CA-150

    Tecnodom Open Chiller with 4 Shelves TDVC60-CA-150 Temp range: 0 - 2°C Length included side-walls (40 mm thick each): 1580mm 100% Eco friendly Compact but with high display surface Suitable for small, medium-sized and large distribution areas Made in Italy technology, design and whole production Easy installation Climate Class 4, Ambient of 30°C with 60% RH Tank made without CFC use Ventilated cooling system Electronic control panel Electric defrosting Upper internal pink neon lighting Autorolling manual night blind 4 shelves made of atossic white-painted steel sheet, easily adjustable in height, without lighting and without shelf risers 2 Years Parts and Labour WarrantyPower: 240V; 2721W; 15A

    $11,880.00 $10,098.00 +GST

  • Sale -15% F.H.E Pull Down Heat Lamp Black 270Mm Round HYWBL08

    F.H.EF.H.E Pull Down Heat Lamp Black 270Mm Round HYWBL08

    Pull down heat lamp black 270mm Round HYWBL08 Length adjustable 1.5 metres On/off switch on lamp shade 250W shatterproof heat lamp included HEATING LAMPS NEED TO BE INSTALLED BY A CERTIFIED ELECTRICIAN FAILURE TO DO SO WILL VOID YOUR WARRANTY 1 Year Parts and Labour WarrantyPower: 240V; 250W; 10A outlets required

    $145.00 $123.25 +GST

  • Sale -15% Dito Sama Grid For Chips 6X6 Mm DS653571

    Dito SamaDito Sama Grid For Chips 6X6 Mm DS653571

    Grid For Chips 6X6 mm - DS653571 Details: 6X6 mmPower:

    $500.00 $425.00 +GST

  • Sale -15% Dito Sama Stainless Steel Slicing Disc With S-Blades 5 Mm DS650086 Dito Sama Stainless Steel Slicing Disc With S-Blades 5 Mm DS650086

    Dito SamaDito Sama Stainless Steel Slicing Disc With S-Blades 5 Mm DS650086

    Stainless Steel Slicing Disc With S-Blades 5 mm - DS650086 Slicing Details: 5mmPower:

    $400.00 $340.00 +GST

  • Sale -15%Last stock! Dito Sama Dicing Grid 20X20 Mm DS653570

    Dito SamaDito Sama Dicing Grid 20X20 Mm DS653570

    Dicing grid 20x20 mm - DS653570 Details: 20x20 mmPower:

    $500.00 $425.00 +GST

  • Sale -15% Dito Sama Stainless Steel Disc With Corrugated S-Blades 2 Mm DS650089 Dito Sama Stainless Steel Disc With Corrugated S-Blades 2 Mm DS650089

    Dito SamaDito Sama Stainless Steel Disc With Corrugated S-Blades 2 Mm DS650089

    Stainless Steel Disc With Corrugated S-Blades 2 mm - DS650089 Corrugated Slicing/Ripple Slicer Details: 2mmPower:

    $500.00 $425.00 +GST

  • Sale -15% Dito Sama Stainless Steel Pressing/Slicing Disc With S-Blades (Balanced) 13 Mm DS650165 Dito Sama Stainless Steel Pressing/Slicing Disc With S-Blades (Balanced) 13 Mm DS650165

    Dito SamaDito Sama Stainless Steel Pressing/Slicing Disc With S-Blades (Balanced) 13 Mm DS650165

    Stainless steel pressing/slicing disc with S-blades (balanced) 13 mm - DS650165 Pressing/Slicing Details: 13mmPower:

    $400.00 $340.00 +GST

  • Sale -15%Last stock! ItaliaCool Open Chiller With 4 Shelves TDVC80-CA-187 ItaliaCool Open Chiller With 4 Shelves TDVC80-CA-187 dimensions

    ItaliaCoolItaliaCool Open Chiller With 4 Shelves TDVC80-CA-187

    Tecnodom Open Chiller with 4 Shelves TDVC80-CA-187 Temp range: 0 - 2°C Length included side-walls (40 mm thick each): 1955mm 100% Eco friendly Compact but with high display surface Display surface: 3.8 m² Suitable for small, medium-sized and large distribution areas Made in Italy technology, design and whole production Easy installation Climate Class 4, Ambient of 30°C with 60% RH Tank made without CFC use Ventilated cooling system Electronic control panel Electric defrosting Upper internal pink neon lighting Autorolling manual night blind 4 shelves made of atossic white-painted steel sheet, easily adjustable in height, without lighting and without shelf risers 2 Years Parts and Labour WarrantyPower: 240V; 4070W; Comes with 2 plugs: 15 + 10 A

    $14,190.00 $12,061.50 +GST

  • Sale -15%Last stock! Dito Sama Combined Cutter And Vegetable Slicer 4.5 Lt Variable Speed TRK45 Dito Sama Combined Cutter And Vegetable Slicer 4.5 Lt Variable Speed TRK45

    Dito SamaDito Sama Combined Cutter And Vegetable Slicer 4.5 Lt Variable Speed TRK45

    TRK45 CUTTER SLICER - 4.5 LT - VARIABLE SPEED Performance (up to): 550 - kg/hour Capacity: 4.5 liter 3 in 1 machine: cutter, emulsifier and vegetable slicer to slice, grate, liquidise, mix and mince in a matter of seconds. Incly system to incline motor base at 20° to better fit the vegetable slicer attachment. Delivered with: [-] Stainless steel lever operated feed hopper [-] 4,5 lt stainless steel cutter bowl, transparent lid, scraper and micro-toothed blade rotor Vegetable slicer unit has slicing, grating, shredding (julienne) as well as dicing and french fries capabilities. Long vegetable round hopper integrated into the feed arm, 3/4 moon roundish hopper to limit pre cutting operations. Emulsifier function (scraper) included as standard. Base fixed cover for a better handling. Red OFF, green ON buttons. Pulse function to coarse chopping. All parts in contact with food are removable without the use of tools, completely dismountable and dishwasher safe. Automatic restart of the machine with the 3/4 moon shaped pusher in position. Magnetic safety system and motor brake. Prevents machine from running when vegetable preparation lever and/or hopper are lifted or when cutter lid is not properly closed. Automatic speed limitation according to the selected function (slicer or cutter). Capacity: [-] vegetable slicer productivity 550 kg/h, suitable for 100-400 meals for table service, up to 800 meals for catering service [-] cutter mixer working capacity from 100 g to 2 kg, for 50-80 meals per service Complete and wide selection of blades and grids available (diam. 205 mm). Asynchronous industrial motor with no brushes for high reliability and quiet functioning, stainless steel motor shaft. Water protected planetary system (IP55 electrical controls, IP23 overall machine). All blades (available on request) are made in stainless steel and dishwasher safe. Stainless steel bowl has a high chimney to ensure high productivity also when processing liquids (75% of the nominal capacity). Feeding arm and hopper are made entirely in stainless steel. Aluminum motor housing. Vegetable cutting at 4 speeds up to 800 rpm. Food processing at 10 variable speeds: 300-3700 rpm. IP24 throughout entire machine. Power: TRK45 - 1.3 HP. IPX5 (IP55) flat panel touch-control, waterproof panel. Compact and portable design. 2 Years Return to Base WarrantyPower: 200-240 V/1N ph/50/60 Hz 1 kW

    $6,750.00 $5,737.50 +GST

  • Sale -15% Dito Sama Stainless Steel Shredding Disc With S-Blades 8X8 Mm (Can Also Be Used For Chips) DS650079 Dito Sama Stainless Steel Shredding Disc With S-Blades 8X8 Mm (Can Also Be Used For Chips) DS650079

    Dito SamaDito Sama Stainless Steel Shredding Disc With S-Blades 8X8 Mm (Can Also Be Used For Chips) DS650079

    Stainless Steel Shredding Disc With S-Blades 8X8 Mm (Can Also Be Used For Chips) - DS650079 Shredding/Julian TRS & TRK S/S CUTTING DISCS 205MM Dishwasher safe Stainless Steel 205mm diameter cutting surface –16.5% larger than other brands Details: 8X8mmPower:

    $500.00 $425.00 +GST

  • Sale -15%Last stock! Dito Sama Grid For Chips 10X10 Mm DS653573

    Dito SamaDito Sama Grid For Chips 10X10 Mm DS653573

    Grid For Chips 10X10 mm - DS653573 Details: 10X10 mmPower:

    $500.00 $425.00 +GST

© 2026 Commercial Kitchen Store, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account