Federal Hospitality Equipment

The Thermaster DC-80F is an under bench freezer that delivers 80 litres of frozen storage from a compact, plug-in footprint, making it a tidy fit beneath a bar or prep bench where floor space is tight.Why operators choose the DC-80F VCM stainless-look front — a clean, modern face that suits any commercial kitchen or bar fit-out. Compact under bench footprint — 545mm wide and 850mm high, so it slots under a counter without giving up storage. ABS freezer drawers with 3 easy-slide baskets — keeps stock organised and easy to pull, even when full. -18 to -10°C range — holds frozen product reliably, rated to a 32°C / 75% RH ambient. Simple manual controls — straightforward temperature management with manual defrost. Specifications Brand Thermaster Model / MPN DC-80F Type Under Bench Freezer Capacity 80 L (gross) Temperature range -18 to -10°C Max ambient 32°C / 75% RH Doors 1 (hinged, solid) Defrost Manual Body / material Stainless Steel External dimensions 545(W) x 583(D) x 850(H)mm Packed dimensions 575(W) x 595(D) x 880(H)mm Power 240V; 100W; 10A Power type Electric (single phase, plug-in) Country of manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration) Venue suitability: Built for bars, cafes and compact commercial kitchens that need extra frozen storage at the point of use without committing to an upright freezer. It tucks under a back-bar or prep bench and runs from a standard 10A power point.Browse the full range of Under Bench Freezers, or see more refrigeration from Thermaster to match it to the rest of your line-up.Installation & delivery: The DC-80F is a plug-in unit that runs from a standard 240V 10A outlet, so no special wiring is required. Dispatched Australia-wide.Frequently asked questionsWhat is the storage capacity of the Thermaster DC-80F? It offers 80 litres of gross frozen storage from a single solid-door under bench cabinet.What temperature range does the DC-80F hold? It operates between -18 and -10°C, rated for use in ambient conditions up to 32°C and 75% relative humidity.Does the DC-80F have automatic defrost? No — it uses manual defrost, which keeps the design simple and reliable.What power supply does the DC-80F need? It runs on 240V single-phase power and draws 100W at 10A, plugging into a standard power point.What warranty comes with the DC-80F? It is covered by 2 years parts and labour, plus a further 2 years parts only when the product is registered within 14 days of invoice.

Read more less

The Thermaster LG-730P is a two-glass-door upright display fridge that chills and showcases bottled and canned drinks at +2 to +8°C, built for high-traffic retail and hospitality venues. Why operators choose the LG-730P 730L gross capacity across two doors — holds a deep range of beverages with adjustable shelving for fast restocking. R290 natural refrigerant with a 7-star GEMS rating — high cooling efficiency and low running costs. LED-lit illuminated canopy and interior — merchandises bestsellers and lifts impulse sales. Self-closing, double-glazed lockable glass doors — holds temperature and secures stock after hours. Heavy-duty castors with brakes — reposition the unit easily and lock it in place. Specifications Brand Thermaster Model / MPN LG-730P Type Upright Display Fridge Gross Capacity 730 L Net Capacity 670 L Doors 2 x self-closing double-glazed glass doors with locks Temperature Range +2 to +8°C Max Ambient 38°C, 65% RH Refrigerant R290 Natural Refrigerant GEMS Star Rating 7 star Power 240V; 450W; 10A Lighting LED with illuminated canopy Defrost Automatic defrost & condensate evaporation Castors Heavy-duty, 2 with brakes Product Dimensions 1120(W) x 610(D) x 1973(H)mm Packed Dimensions 1150(W) x 655(D) x 2015(H)mm Net Weight 121 kg Warranty 2 years parts & labour + 2 years parts only with registration within 14 days of invoice Venue suitability: Suited to supermarkets, service stations, cafes, takeaway shops, restaurants and bottle shops needing high-visibility chilled beverage merchandising. It sits well alongside our other Upright Display Fridges, and the full Thermaster range covers complementary refrigeration for the same venues. Installation & delivery: Plugs into a standard 240V 10A outlet — no special installation required. Dispatched Australia-wide. Frequently asked questions What is the capacity of the LG-730P? It has a 730L gross / 670L net capacity across two glass doors with adjustable shelving. What temperature range does it hold? It operates between +2 and +8°C, ideal for chilled drinks and bottled beverages. What refrigerant does it use? It uses R290 natural refrigerant and carries a 7-star GEMS energy rating for low running costs. Are the doors lockable? Yes — the self-closing, double-glazed glass doors have locks to secure stock after hours. What warranty applies? It comes with 2 years parts & labour plus a further 2 years parts only when registered within 14 days of invoice.

Read more less

The FED-X XURF1200SFV is a double door upright storage freezer that holds bulk frozen stock at a steady -18 to -22°C in high-turnover commercial kitchens, cafes and bars. Why operators choose the XURF1200SFV 791 L net capacity — three shelf levels plus base hold a full week of frozen product behind two solid doors. Fan-forced cooling — even -18 to -22°C temperatures throughout the cabinet for fast, reliable freezing. Tropical-rated to 43°C — keeps performing in hot Australian kitchens and back-of-house conditions. R290 refrigerant — efficient, low-GWP hydrocarbon gas with auto defrost and digital control. Stainless steel inside and out — rounded corners and self-closing lockable doors for easy cleaning and hygiene. Specifications Brand FED-X Model / MPN XURF1200SFV Type Upright Storage Freezer Net Capacity 791 L Gross Volume 1236 L Doors 2 (hinged, solid) Temperature Range -18 to -22°C Refrigerant R290 Cooling Fan-forced, auto defrost Max Ambient 43°C, 60% RH Power 240V, 700W, 4.6A Energy Consumption 12.33 kWh/24h Construction Stainless Steel Internal Dimensions 1224 x 682 x 1394mm Product Dimensions 1340 x 840 x 2000mm Packed Dimensions 1365 x 855 x 2070mm Net Weight 177 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (registered within 14 days) Venue suitability: Suited to busy restaurants, pubs, catering kitchens and convenience stores needing high-volume frozen storage in a compact two-door upright footprint. Browse the full Commercial Upright Freezers range or see more from FED-X to compare door configurations and capacities. Installation & delivery: Plugs into a standard 240V 10A outlet — no special installation required — and rolls into place on heavy-duty castors with front brakes. Dispatched Australia-wide. Frequently asked questions What temperature range does the XURF1200SFV hold? It operates as a freezer between -18 and -22°C. How much can it store? Net capacity is 791 litres (1236 L gross) across three shelf levels plus the base. What refrigerant does it use? It runs on R290, an efficient low-GWP hydrocarbon refrigerant, with automatic defrost. Will it cope with a hot kitchen? Yes — it is tropical-rated to a 43°C ambient at 60% relative humidity for Australian conditions. What power supply does it need? A standard single-phase 240V supply; the unit draws 700W / 4.6A.

Read more less

The FED-X XVRX1200/380S is a 1200mm countertop prep fridge (salad bench) designed for high-volume food preparation in commercial kitchens. It features a hinged stainless steel lid, static cooling with a Donper compressor, and Dixell digital temperature control, holding product at +2 to +8°C for safe holding of prepped ingredients through service. Why operators choose the XVRX1200/380S Four GN 1/3 pan positions — maximise mise en place coverage during peak service with angled pan positions and 150mm max pan depth. Stainless steel throughout — interior and exterior construction for hygiene, durability, and compliance with commercial kitchen standards. Reliable static cooling — Donper compressor with Dixell digital controller ensures consistent +2 to +8°C holding without air blast drying out produce. Heavy-duty condenser fans — maintain performance in demanding ambient environments up to 38°C. Pan divider included — quick organisation of prepped ingredients; pans are sold separately, giving you flexibility on GN sizing. Specifications Brand FED-X Model / MPN XVRX1200/380S Type Countertop Prep Fridge (Salad Bench) Capacity 4 x GN 1/3 Doors 1 Door Type Hinged Temperature Range +2 to +8°C Max Ambient Temperature 38°C at 60% RH Cooling System Static cooling Compressor Donper Controller Dixell digital Max Pan Depth 150 mm Pan Divider Included (pans not included) External Material Stainless Steel (interior & exterior) Power 240V; 50Hz; 10A; 110W Power Type Electric (Single Phase) Width 1200 mm Depth 395 mm Height 281 mm Product Dimensions 1200(W) x 395(D) x 281(H) mm Packed Dimensions 1290(W) x 460(D) x 460(H) mm Net Weight 24 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: Ideal for cafes, restaurants, delis, sandwich bars, and catering operations requiring fast access to prepped ingredients during service. The compact 281mm body height fits under most standard bench heights, while the 1200mm width suits high-output stations. Browse our full range of Countertop Prep Fridges or explore all FED-X refrigeration equipment. Installation & delivery: Single-phase 240V — plugs into a standard 10A outlet with no special installation required. Ensure adequate airflow clearance around the condenser. Dispatched Australia-wide with stock held in Sydney, Melbourne, Brisbane, and Perth for faster regional delivery. Frequently asked questions Do pans come included with the XVRX1200/380S?No. The unit includes a pan divider but pans are sold separately. It accommodates GN 1/3 pans up to 150mm deep. What is the power requirement?The XVRX1200/380S runs on single-phase 240V / 50Hz and draws 10A at 110W — compatible with a standard 10A GPO. What warranty is included?FED-X provides 2 years parts and labour plus an additional 2 years parts only, provided the unit is registered within 14 days of invoice date. What is the maximum ambient temperature the unit can operate in?The XVRX1200/380S is rated for ambient temperatures up to 38°C at 60% relative humidity — suitable for most commercial kitchen environments. What is the capacity and how many GN pans does it hold?The bench holds 4 x GN 1/3 pans (up to 150mm deep) in angled positions, with a pan divider included for quick organisation of prepped ingredients.

Read more less

The FED-X XVRX1500/380S is a 1500mm refrigerated countertop prep fridge (raised-rail saladette) that keeps gastronorm pans of garnishes, toppings and proteins chilled and within reach at the make line.Why operators choose the XVRX1500/380S 6 x 1/3 GN pan capacity — holds a full topping range across the 1500mm rail with a pan divider included. +2 to +8°C static cooling — food-safe holding for prepped ingredients through service. Stainless steel lid — covers the wells to protect product and hold temperature when the line is idle. Donper compressor & Dixell controller — proven refrigeration components with accurate temperature control. Stainless steel interior and exterior — durable, wipe-clean and corrosion-resistant for a busy kitchen. Specifications Brand FED-X Model / MPN XVRX1500/380S Type Countertop Prep Fridge Pan capacity 6 x 1/3 GN Cooling system Static cooling Temperature range +2 to +8°C Max ambient 38°C, 60% RH Compressor Donper Controller Dixell Doors 1 (hinged) Maximum pan depth 150mm Construction Stainless steel interior and exterior Lid Stainless steel Power 240V; 50Hz; 10A; 110W Product dimensions 1500(W) x 395(D) x 281(H)mm Packed dimensions 1590(W) x 460(D) x 460(H)mm Net weight 28kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: Suited to sandwich bars, salad bars, pizzerias and cafe make-lines where toppings need to stay chilled and accessible at the counter. It sits within our Countertop Prep Fridges range and the wider FED-X refrigeration line-up.Installation & delivery: Plug-in 240V operation — no special installation required. Dispatched Australia-wide.Frequently asked questionsHow many pans does the XVRX1500/380S hold? It holds 6 x 1/3 GN pans along the 1500mm rail, with a pan divider included. Pans are not supplied.What temperature does it operate at? It runs at +2 to +8°C using a static cooling system, rated for ambient conditions up to 38°C and 60% relative humidity.What is the maximum pan depth? The wells accept gastronorm pans up to 150mm deep.Does it have a lid? Yes — this model is fitted with a stainless steel lid to cover the wells and help hold temperature.What warranty does it come with? 2 years parts and labour, plus a further 2 years parts only when the product is registered within 14 days of invoice.

Read more less

The Bonvue CGD-03B is a bench-top gelato and ice-cream display freezer that turns a small counter footprint into an eye-level showcase for scoop gelato, ice cream and popsicles. Its curved glass top and LED-lit cabinet keep product visible and merchandised at serving temperature.Why operators choose the CGD-03B True frozen display — holds -16°C to -18°C so gelato and ice cream stay scoop-ready on the counter. R290 natural refrigerant — a hydrocarbon refrigerant with low environmental impact and efficient pull-down. Flexible pan layout — fits 1x 65mm-deep 1/1 GN, or 3x 5L gelato pans, or 2x popsicle insert discs. Hermetic compressor & static cooling — quiet, sealed refrigeration with downtime defrosting for low-maintenance running. Merchandising built in — black stainless body, curved glass top and LED lighting present product cleanly at the point of sale. Specifications Brand Bonvue Model / MPN CGD-03B Type Bench-top gelato / ice-cream display freezer Capacity 45 L Temperature range -16°C to -18°C Refrigerant R290 (natural hydrocarbon) Ambient rating 30°C / 55% RH Pan capacity 1x 65mm 1/1 GN, or 3x 5L gelato pan, or 2x popsicle insert disc Cooling Static cooling, hermetic compressor, downtime defrosting Controller Dixcell digital controller Lighting LED Construction Black stainless steel body with curved glass top Power 240V, 195W / 10A Product dimensions 670(W) x 750(D) x 360(H)mm Packed dimensions 810(W) x 740(D) x 570(H)mm Net weight 44 kg Country of manufacture China Warranty 1 Year Parts & Labour plus 1 Year Parts Only when registered within 14 days of invoice Venue suitability: Ideal for gelaterias, cafes, dessert bars, kiosks and convenience counters where bench space is tight but frozen product needs to be seen and served quickly. The compact footprint suits front-of-house counters and grab-and-go popsicle displays.Browse more Ice Cream Freezers for larger floor-standing showcases, or see the full range of Bonvue refrigeration and display cabinets to match your fit-out.Installation & delivery: Plug-in 240V operation - no special installation required; sits on a counter and runs from a standard 10A power point. Dispatched Australia-wide.Frequently asked questionsWhat temperature does the CGD-03B hold? It operates between -16°C and -18°C, suitable for displaying frozen gelato, ice cream and popsicles.How many pans does it hold? It fits one 65mm-deep 1/1 GN pan, or three 5L gelato pans, or two popsicle insert discs.What refrigerant does it use? It uses R290, a natural hydrocarbon refrigerant.What are its dimensions and power needs? The cabinet is 670(W) x 750(D) x 360(H)mm and runs on 240V, 195W / 10A from a standard power point.What warranty is included? It carries 1 Year Parts & Labour plus 1 Year Parts Only warranty when the product is registered within 14 days of invoice.

Read more less

The Benchstar WB-30/10 is a 30 litre commercial hot water urn that delivers a continuous supply of hot water for high-turnover beverage and catering service. Why operators choose the WB-30/10 30 litre capacity — keeps tea, coffee and hot water flowing through busy service periods. Rotary dial control, 30–100°C — set and hold a precise working temperature with clearly marked levels. Automatic boil limiter — cuts power once the water has boiled for safe, unattended operation. Mirror-finish stainless steel body — wipes clean and resists corrosion in commercial use. Concealed heating element — no exposed element to scale up, making cleaning straightforward. Non-drip tap with water-level gauge — clean dispensing and an at-a-glance fill level. Specifications Brand Benchstar Model / MPN WB-30/10 Type Hot Water Urn Capacity 30 L Power 240V, 2.3 kW / 10A Power Type Electric Working Temperature 30–100°C Material Stainless Steel Product Dimensions 350(W) x 420(D, incl. handles) x 550(H)mm Packed Dimensions 390 x 390 x 620mm Net Weight 4.1 kg Warranty 1 Year Return to Base Venue suitability: Suited to offices, function and catering venues, community centres, cafes and hospitality settings that need a reliable, refillable supply of hot water for tea, coffee and instant beverages. It sits naturally alongside other boiling and hot-water equipment, and is part of our wider Benchstar range of catering equipment. Installation & delivery: Plugs into a standard 10A 240V GPO — no special installation required. Dispatched Australia-wide. Frequently asked questions What capacity is the Benchstar WB-30/10? It holds 30 litres of hot water. What power supply does it need? It runs on 240V single phase, drawing 2.3 kW through a standard 10A plug. What temperature range can it hold? The rotary dial sets a working temperature anywhere from 30 to 100°C. Does it have boil-dry or boil protection? Yes — an automatic temperature limiter cuts power once the water has boiled. What warranty does it come with? It is covered by a 1 Year Return to Base warranty.

Read more less

Large Double Contact Grill GH-813EE Key Features Temperature: 50 - 300ºC High-Quality Non-Stick Cast Iron Plates Smooth Top Plates: 2 × 338×220 mm Smooth Bottom Plates: 2 × 338×230 mm Fast Heat Recovery All Stainless Steel Body Cooking area: 759×285 mm Net weight: 31kg 1 Year Return to Base Warranty Power: 240V; 4.4kW; 2 x 10A plugs required

Read more less

The Benchstar IF3500S is a single-tank benchtop induction deep fryer that delivers fast, precise frying for cafes, takeaways and small commercial kitchens. Induction heating holds the oil within 2°C of the set point and recovers temperature quickly between batches, using energy at roughly 90% efficiency — about 35% more efficient than conventional electric fryers. Why operators choose the IF3500S Precise digital control — LED display and touch controls hold temperature within 2°C versus 10°C+ on analog units. 8 L oil tank — practical batch capacity in a compact 288mm-wide benchtop footprint. Energy efficient — induction technology runs at about 90% efficiency, cutting running costs. Fast recovery — quick reheat between baskets keeps service moving. Easy clean-down — stainless steel body with oil drainage tap, plus a basket, S/S filter and S/S lid included. Specifications Brand Benchstar Model / MPN IF3500S Type Single-tank benchtop induction deep fryer Oil tank capacity 8 L Power 240V; 3.5kW; 15A (single phase) Temperature range 60-190°C (within 2°C) Timer 0-120 min Display / control LED display, touch control Baskets 1 basket (with S/S filter and S/S lid) Basket dimensions 190 x 230 x 145mm (without handle) Oil tank dimensions 248~228 x 300~287.7 x 202mm Construction Stainless steel body with oil drainage tap Product dimensions 288(W) x 478(D) x 410(H)mm Packed dimensions 565(W) x 350(D) x 480(H)mm Country of manufacture China Warranty 12 months (1 Year Return to Base) Venue suitability: Ideal for cafes, food trucks, takeaways, pubs and small commercial kitchens that need fast, controllable frying without a fixed gas connection. Browse the full range of Commercial Benchtop Deep Fryers, or see more equipment from Benchstar to match your bench setup. Installation & delivery: Plugs into a standard 15A single-phase outlet — no gas or hard-wiring required. Dispatched Australia-wide. Frequently asked questions How much oil does the IF3500S hold? The single tank holds 8 litres of oil. What power supply does it need? It runs on 240V single phase, 3.5kW, and requires a 15A power outlet. What temperature range does it reach? The fryer operates from 60°C to 190°C and holds the set temperature within 2°C. Is it more efficient than a standard electric fryer? Yes — induction heating runs at about 90% efficiency, roughly 35% more efficient than conventional electric fryers. What's included with the fryer? It comes with one frying basket, a stainless steel filter and a stainless steel lid.

Read more less

The Yasaki HR-9 is a compact commercial food processor that lets busy kitchens chop, mince, blend and emulsify large batches in a single 9 litre stainless steel bowl.Why operators choose the HR-9 9 litre stainless steel bowl with a secure locking mechanism Variable speed control for everything from coarse chopping to fine purees See-through lid lets you monitor processing from start to finish and add ingredients on the go Stainless steel blade assembly for fast, even results and easy cleaning Compact benchtop footprint that suits tight prep areas Specifications Brand Yasaki Model / MPN HR-9 Type Food Processor Capacity 9 L Speed Variable Bowl & Blade Stainless steel Power 240V; 1800W; 10A outlet required Product Dimensions 570(W) x 385(D) x 460(H) mm Packed Dimensions 385(W) x 570(D) x 460(H) mm Net Weight 20 kg External Material Stainless Steel Country of Manufacture China Warranty 2 Years Return to Base Venue suitability: Ideal for cafes, restaurants, delis and caterers needing fast bulk prep of sauces, dips, mince and chopped vegetables. Browse the full range of commercial food processors or see more equipment from Yasaki.Installation & delivery: Plugs into a standard 10A single-phase outlet, no installation required. Dispatched Australia-wide.Frequently asked questionsWhat is the bowl capacity of the Yasaki HR-9? The HR-9 has a 9 litre stainless steel bowl.Does the HR-9 have variable speed? Yes, it features variable speed control so you can match the speed to the task, from coarse chopping to fine purees.What power supply does the HR-9 need? It runs on 240V single phase and draws 1800W, requiring a standard 10A power outlet.Can I add ingredients while it is running? Yes. The see-through lid lets you monitor processing and add ingredients while the unit is operating.What warranty does the HR-9 come with? The HR-9 is covered by a 2 year return-to-base warranty.

Read more less

The Blizzard SN-120P is a compact self-contained, air-cooled under bench cube ice maker that produces up to 55 kg of ice per 24 hours, with an 18 kg storage bin. WaterMark-certified and finished in stainless steel, its slim 500 mm-wide cabinet suits small cafes, bars and offices where bench space is tight. Why operators choose the SN-120P Up to 55 kg cube ice per 24h - right-sized output for cafes, small bars and offices 18 kg storage bin - a handy buffer of ready ice for service Slim 500 mm cabinet - fits tight under bench spaces 22 mm cube ice - clear, slow-melting cubes for drinks WaterMark certified - meets Australian plumbing certification requirements Air-cooled, stainless steel - no cooling-water circuit and an easy-clean finish Specifications Brand Blizzard Model / MPN SN-120P Type Self Contained Ice Maker Ice type Cube (22 mm) Ice output Up to 55 kg / 24h Ice storage 18 kg Cooling Air-cooled Body material Stainless steel Country of manufacture China Certification WaterMark certified Power 240 V; 480 W; 10 A Power type Electric (single phase) Product dimensions 500(W) x 590(D) x 850(H) mm Packed dimensions 670(W) x 580(D) x 835(H) mm Net weight 45 kg Packed weight 60 kg Warranty 2 Years Parts and Labour Venue suitability: At 55 kg a day from a 500 mm-wide cabinet, the SN-120P suits small cafes, offices, bars and staff kitchens with modest ice needs and limited bench space. It is a right-sized entry unit rather than a high-volume machine, so busier venues should step up to a larger model. See the rest of our self-contained ice makers or the full Blizzard ice range to match output and footprint to your site. Installation & delivery: Ships with a 240 V 10 A plug and lead and requires a cold water supply and drain, plus clearance for the air-cooled condenser. Backed by a 2 Years Parts and Labour warranty (see our warranty information). Dispatched Australia-wide. Frequently asked questions How much ice does the SN-120P make and hold? Up to 55 kg of cube ice per 24 hours, with an 18 kg onboard storage bin. How wide is the cabinet? Just 500 mm wide, so it fits tight under bench spaces. What size ice does it produce? Clear 22 mm cube ice. What power and connections does it need? A 240 V 10 A supply (plug and lead included) drawing 480 W, plus a cold water supply and a drain. Is it certified for Australia? Yes, the SN-120P is WaterMark certified. What warranty is included? It comes with a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Modular Systems YC-102 is a 2-shelf stainless steel service trolley designed for high-traffic kitchen, front-of-house, and catering environments. Rated to 150 kg total load, its solid SUS430 shelves with standard lipped edges keep equipment and supplies secure in motion, while the SUS201 tubular frame provides structural rigidity at a practical weight. Four swivel castors — two fitted with brakes — allow confident positioning on busy floors.Why operators choose the YC-102 150 kg load rating — handles heavy bain marie units, pots, and full mise-en-place trays without flex. Standard lip shelves — raised edges on both tiers prevent sliding and spills during service. SUS430 hairline-finish shelves — food-safe stainless that cleans down quickly between services. Two braked castors — lock the trolley in place at the pass or prep bench; release to reposition in seconds. Flat-pack delivery — supplied with instruction manual and tools for on-site assembly, reducing freight damage risk. Specifications Brand Modular Systems Model / MPN YC-102 Type 2-Shelf Service Trolley Shelves 2 Shelf Style Standard Lip Load Capacity 150 kg Shelf Material SUS430 Stainless Steel, Hairline Finish Frame Material 25mm² SUS201 Stainless Steel Tube, BA Finish Castors 4 Swivel (2 with Brake) Width 855 mm Depth 535 mm Height 940 mm Net Weight 12 kg (store record; supplier page states 10 kg — confirm) Packed Dimensions 850(W) × 550(D) × 150(H) mm Country of Manufacture China Warranty 2 Years Parts Only Venue suitability: Ideal for commercial kitchens, catering operations, food service buffets, and institutional dining. The compact 855 mm width suits galley-style kitchens, while the 940 mm working height aligns to standard bench ergonomics. Browse our full range of Trolleys & Racks or explore the complete Modular Systems collection for compatible shelving and storage.Installation & delivery: The YC-102 ships flat-packed with all required assembly hardware and an instruction manual. No specialist tools or trade installation required. Dispatched Australia-wide.Frequently asked questionsWhat is the load capacity of the YC-102?The YC-102 is rated to 150 kg total distributed load across both shelves.What grade of stainless steel is the YC-102 made from?The shelves are SUS430 stainless steel with a hairline finish. The tubular frame is SUS201 stainless steel with a BA (bright annealed) finish.Does it arrive assembled?No — the YC-102 is supplied flat-packed for safer freight. Assembly hardware, instructions, and the required tools are included in the box.How many castors have brakes?Two of the four swivel castors are fitted with brakes, allowing the trolley to be locked in place during service.What are the external dimensions?855 mm wide × 535 mm deep × 940 mm high. Packed dimensions are 850(W) × 550(D) × 150(H) mm.

Read more less

The F.H.E HT-20S is a mobile hot-holding cabinet that keeps plated meals, trays and banquet covers at safe serving temperature between service and the floor. It runs an even convection heat across 20 pan positions with a built-in water tray to hold humidity, so food stays warm without drying out. Why operators choose the HT-20S 20-pan 1/1 GN capacity — holds a full banquet or buffet load (530 x 325 x 65mm pans, not included). Built-in humidity tray — adds moisture so held food doesn't dry or crust. Even convection heating — consistent 30–90°C across the cabinet with adjustable temperature control and a front gauge. Fully mobile — castors plus two clip-on side handles move it safely between kitchen and service area. Built to last — solid stainless doors with a lockable handle and a rubber base bumper for knock protection. Specifications Brand F.H.E Model / MPN HT-20S Type Heated Holding Cabinet (Mobile Warmer Cart) Pan Capacity 20 x 1/1 GN (pans not included) Gross Volume 367 L Net Volume 290 L Temperature Range 30–90°C Heating Even convection, adjustable thermostat with gauge Humidity Built-in water tray Doors Single, solid stainless steel, lockable Mobility Castors + 2 clip-on side handles Power 800 W; 10 A Power Type Electric Construction Stainless steel Product Dimensions 515(W) x 780(D) x 1763(H)mm (672mm wide with handles fitted) Packed Dimensions 850(W) x 600(D) x 1900(H)mm Country of Manufacture China Warranty 1 Year Parts and Labour Venue suitability: Built for caterers, function centres, banquet halls, aged-care and hospital kitchens, and any venue that needs to hold plated food hot and mobile between the kitchen and a service point. It belongs in the Holding Cabinets family for operators comparing hot-hold options. Installation & delivery: Plug-in 10 A electric — no special connection required; roll into place and switch on. Dispatched Australia-wide. Frequently asked questions How many pans does the HT-20S hold? It holds 20 pans in the 1/1 GN format (530 x 325 x 65mm). Pans are not included. What temperature range does it cover? The cabinet holds between 30°C and 90°C, set on an adjustable thermostat with a front-mounted temperature gauge. Does it keep food from drying out? Yes — a built-in water tray adds humidity so held food stays moist rather than crusting under dry heat. Is the HT-20S mobile? Yes. It runs on castors and ships with two clip-on side handles so it can be moved safely and steadily between the kitchen and service area. What power supply does it need? It runs on a standard 800 W, 10 A electric supply — a normal plug-in connection.

Read more less

The F.H.E MD-1000L is a commercial microwave oven that delivers 1000 watts of cooking power from a stainless steel cabinet built for the demands of a busy food-service environment.Why operators choose the MD-1000L 1000 W output — fast, even reheating and cooking through service rushes. Stainless steel cabinet and cavity — withstands heavy commercial use and wipes down quickly. 25 L capacity — accommodates a 12″ (305 mm) platter for larger plated portions. 5 power levels and 3 cooking stages — with 100 auto programs to standardise output across staff. Touch control pads plus dial timer — an EZ Grab’n Go handle with no moving parts and a stackable footprint to save bench space. Specifications Brand F.H.E Model / MPN MD-1000L Type Commercial Microwave Oven Power Type Electric Capacity 25 L (fits 12″ / 305 mm platter) Output Power 1000 W Power Supply 240V; 1000W; 10A Power Levels 5 Cooking Stages 3 Auto Programs 100 Doors 1 Construction Stainless Steel Cavity (W x D x H) 327 x 346 x 200mm Product Dimensions 511(W) x 432(D) x 311(H)mm Packed Dimensions 581(W) x 478(D) x 380(H)mm Net Weight 14.7 kg Warranty 2 Years Return to Base Venue suitability: A 1000 W bench-top commercial microwave suits cafes, club canteens, takeaways, bars and staff kitchens that need rapid reheating and cooking without a large footprint, and its stackable design helps where bench space is tight.Browse the full range of commercial microwave ovens to compare capacities and output ratings.Installation & delivery: Plugs into a standard 240V 10A power point — no special installation required. Dispatched Australia-wide.Frequently asked questionsWhat is the cooking power of the F.H.E MD-1000L? It delivers 1000 watts of microwave output.What capacity is the MD-1000L? The oven cavity is 25 litres and accommodates a 12-inch (305 mm) platter.What power supply does it need? It runs on a standard 240V supply at 10A, drawing 1000W, so it connects to an ordinary power point.Can the controls be standardised across staff? Yes — it offers 5 power levels, 3 cooking stages and 100 auto programs, plus touch control pads and a dial timer.Can these microwaves be stacked? Yes, the MD-1000L is designed to be stackable to save bench space.

Read more less

1800-7-SSBC Economic 304 Grade SS Centre Single Sink Bench 1800x700x900 with 610x400x250 sink Code Width Sinks Sink Position 1200-6-SSBC 1200mm 400x400x250mm Centre 1200-7-SSBC 1200mm 400x400x250mm Centre 1500-6-SSBC 1500mm 500x400x250mm Centre 1500-7-SSBC 1500mm 500x400x250mm Centre 1800-6-SSBC 1800mm 610x400x250mm Centre 1800-7-SSBC 1800mm 610x400x250mm Centre 2 Years Parts only Warranty Product Dimensions: 1200~1800(W) x 600or700(D) x 900+100(H)mm

Read more less

Double Tier 400mm Deep Workbench Overshelf 750mm High   Key Features: The Modular Systems Stainless Steel Over Shelf, crafted from 1.0mm thick 304-grade stainless steel, is a durable and versatile addition to any commercial kitchen. Its stainless steel legs and round fixing plate allow for easy attachment to stainless steel benches or bench refrigeration units. Compatible with Benchstar heating strips, this heavy-duty shelf enhances space efficiency and operational flexibility in high-demand environments, ensuring longevity and ease of maintenance.   S/S OVER SHELF: An easy way to add shelving and storage space, simply place and fasten to an existing benchtop All Stainless Steel Single Tier Workbench Over shelf Material: 1.2 mm material; SUS304 (18/8) Hairline finish Max weight load: 90kg to 150kg(depending on shelf length) Specially designed for quick & simple assembly Comes with instruction manual & tools Supplied flat-packed for ease of transport   Warranty: 2 Years Parts only  

Read more less

The Thermaster LG166FA is an upright single glass-door beverage display fridge that chills and merchandises drinks in a slimline 390 mm-wide footprint, built for cafes, convenience stores and front-of-house venues short on floor space. Why operators choose the LG166FA Slimline footprint — just 390 mm wide, it fits tight gaps where a standard upright won't. 166 L gross / 144 L net — full-height adjustable shelving merchandises a deep range of drinks. 0 to +10°C with digital controller — holds beverage-safe temperatures and is easy to read and set. Dual lighting with independent switch — lights the display without running the whole cabinet. 9-star GEMS energy rating — among the more efficient single-door uprights to run. Lockable, auto-defrost and self-evaporating — secures stock and cuts manual maintenance. Specifications Brand Thermaster Model / MPN LG166FA Type Upright Glass Door Beverage Display Fridge Gross Volume 166 L Net Volume 144 L Doors 1 (hinged glass, not reversible) Temperature Range 0 to +10°C Max Ambient Temperature 32°C, 60% RH Form Factor Upright Body / Construction Stainless Steel Lighting Dual lighting system with independent light switch Control Digital display and controller Defrost Auto-defrost and self-evaporating Energy Rating 9-star GEMS Power 240V; 200W; 10A Product Dimensions 390(W) x 487(D) x 1918(H)mm Packed Dimensions 440 x 540 x 2130mm Net Weight 58 kg Country of Manufacture China Warranty 2 Years Parts & Labour plus 2 Years Parts Only (when registered within 14 days of invoice) Venue suitability: The slim 390 mm width and upright glass-door display suit cafes, convenience stores, takeaway shops, offices and bars that need to merchandise chilled drinks where floor space is at a premium. Browse more options in our Upright Display Fridges range or see the full Thermaster line-up. Installation & delivery: Plugs into a standard 240V power point — no special installation required. Allow ventilation clearance around the cabinet. Dispatched Australia-wide. Frequently asked questions What is the storage capacity of the LG166FA? It has a 166 L gross / 144 L net capacity with adjustable shelving for flexible drink configurations. What temperature range does it hold? The cabinet operates from 0 to +10°C, suited to chilled beverages, in ambient conditions up to 32°C at 60% relative humidity. How wide is the unit? It measures 390(W) x 487(D) x 1918(H)mm, making it one of the slimmest single-door upright display fridges available. Is the door lockable and reversible? The door is lockable. It is not reversible as supplied, though a left-hinge opening is available on request. What warranty is included? It comes with 2 Years Parts & Labour plus 2 Years Parts Only warranty when the product is registered within 14 days of invoice.

Read more less

Thermaster Under-Bench Three Sliding Door Bar Cooler - LG-330SC     Expand your beverage selection with this broad and practical underbench three-door bar cooler from Temperature Thermaster. Thermaster is unrivalled when it comes to high-functioning fridges and freezers and is a personal favourite amongst many bar and restaurant owners. The LG-330SC gives you more space and a wider frame to boost the range of drinks you can store inside and easily access at the front of your bar or club. You can arrange an assortment of alcoholic and non-alcoholic beverages inside this underbench cooler, which saves you time grabbing drinks from back fridges and delivers the same cold, crisp taste that people love. This reliable cooler comes built with two levels of shelving, powerful compressors, double-glazed doors, interior lights, and strong industrial materials.   Key Features Gross Volume: 293L Net Volume: 220L Max Ambient Temperature: 38℃，65%RH Temperature Range: 2 to 8°C Suitable For Under-Bench Use Two Levels Of Shelving Plus Floor Digital Temp. Control & Read-Out Double Glazed Doors Sliding Doors Auto Defrost Light Inside Strong Industrial Shelving Fully Adjustable Shelves 100mm Wall Clearance Required for Ventilation The Largest Range In Australasia Lock & Key   2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration Product Dimensions: 1350(W) x 530(D) x 835(H)mm Power: 240V; 315W

Read more less

Frymax Oil Filter Powder90 × 135g SatchelsCrispy & golden brown on the outside. Tender & succulent on the inside. An aroma & look that people love. How can you get it every time?Using Frymax Oil Filter Powder extends oil life significantlyWith regular oil filtering & Frymax Oil Filter Powder products cook faster, oil lasts longer & taste is improved. • Price of edible oil has risen substantially in recent years. • By using Oil Filter Powder you can save you up to 66% on your oil costs. • Filtering alone will only remove the solid lumps from the oil • A sticky residue remains that is made up of polarised free fatty acids. • Oil Filter Powder adsorbs the fatty acids changing them into solid particles which are easily removed by the filtering process. • Oil Filter Powder can extend the life of your oil significantlyPower:

Read more less

The FryMAX EF-28LE is a freestanding electric deep fryer that holds 28 litres of oil in a single stainless steel vat, built for continuous high-volume frying in commercial kitchens. Why operators choose the EF-28LE 28L oil capacity with twin baskets — fry large batches back-to-back through service without losing pace. Very fast recovery — the high-effect heating tube brings oil back to temperature quickly between drops for consistent results. Cold zone vat — crumbs and sediment settle below the elements, keeping oil cleaner and extending its life. Stainless steel construction — durable, easy to wipe down, and the electro-thermal element turns upward for simple vat cleaning. Built-in safety — over-temperature protector and a safe oil drain valve for controlled, hygienic oil changes. Specifications Brand FryMAX Model / MPN EF-28LE Type Electric Deep Fryer Oil Capacity 28 L Baskets Two Temperature Range +50 to +200°C Power 415V 3~N, 18kW Material Stainless Steel External Dimensions 400(W) x 880(D) x 1111(H) mm Packed Dimensions 830(W) x 420(D) x 1130(H) mm Net Weight 58 kg Warranty 1 Year Parts & Labour Venue suitability: The EF-28LE suits busy restaurants, takeaways, pubs and catering kitchens that fry continuously and need quick recovery to keep up with rush periods. Browse the full range of Deep Fryers or see more from FryMAX to compare capacities and power configurations. Installation & delivery: Requires a 415V three-phase supply and should be commissioned by a licensed electrician. Dispatched Australia-wide. Frequently asked questions How much oil does the FryMAX EF-28LE hold? The single stainless steel vat holds a recommended 28 litres of oil. What power supply does the EF-28LE need? It runs on a 415V three-phase (3~N) supply and draws 18kW, so it must be hardwired by a licensed electrician. How many baskets does it come with? It is supplied with two frying baskets, letting you run separate batches at once. What temperature range does it reach? The thermostat adjusts from +50 to +200°C for everything from gentle holding to high-heat frying. Does the EF-28LE have a cold zone? Yes. The cold zone lets sediment settle below the heating elements, keeping the oil cleaner and helping it last longer.

Read more less

The FED-X XR400SS is a single solid-door upright storage fridge that holds chilled stock at a steady service temperature in a compact 600mm-wide footprint. Why operators choose the XR400SS 350 L stainless cabinet — a full-height single-door fridge that fits tight kitchens at just 600mm wide. Digital temperature control & read-out — set and monitor the -2 to 8°C range at a glance. 50mm high-density insulation — CFC & HCFC free, holding temperature efficiently. Lockable solid door — secures stock, with a recessed handle and rounded internal corners for easy cleaning. R600a natural refrigerant — eco-friendly, with static cooling and fan circulation. Specifications Brand FED-X Model / MPN XR400SS Type Upright Storage Fridge Capacity 350 L (gross) Doors 1 (solid, hinged, lockable) Temperature Range -2 to 8°C Max Ambient 30°C, 55% RH Refrigerant R600a Construction Stainless Steel exterior Insulation 50mm high-density, CFC & HCFC free Power 240V; 300W; 10A Energy Consumption 1.6777 kWh/24h Product Dimensions 600(W) x 585(D) x 1850(H)mm Packed Dimensions 646(W) x 642(D) x 1990(H)mm Net Weight 67 kg Warranty 2 Years Parts & Labour + 2 Years Parts only (with product registration) Venue suitability: A reliable workhorse for cafes, takeaways, bars and small commercial kitchens needing secure, energy-efficient upright cold storage where floor space is limited. Browse more options in our Commercial Solid Door Upright Fridges range, or see the full FED-X refrigeration line-up. Installation & delivery: Plugs into a standard 240V/10A outlet — no special installation required. Dispatched Australia-wide. Frequently asked questions What is the storage capacity of the XR400SS? It has a 350 L gross capacity in a single-door cabinet measuring 600(W) x 585(D) x 1850(H)mm. What temperature range does it hold? The fridge operates across -2 to 8°C, controlled and displayed via a digital thermostat. What refrigerant does it use? It uses R600a, a natural, eco-friendly refrigerant, with static cooling and fan circulation. Is the door lockable? Yes — the solid door is lockable and has a recessed handle, with rounded internal corners for hygienic cleaning. What power supply does it need? It runs on a standard 240V supply, drawing 300W (10A), so it connects to a normal power outlet.

Read more less

The FED-X XGNS1300D is a three-door commercial salad prep fridge designed for high-volume food preparation in professional kitchens. With a 218 L net capacity and a stainless steel hinged lid opening to 8 × GN1/6 pan slots, it keeps ingredients chilled and accessible at the pass.Why operators choose the XGNS1300D GN-compatible top rail — 8 × GN1/6 pan slots under a hinged stainless steel lid for instant access to garnishes, sauces, and toppings. Fan-assisted cooling — Dixell digital controller with Embraco/Secop compressor holds a stable +2 to +8°C operating range. R290 natural refrigerant — low global-warming-potential gas, meeting current environmental standards. Rounded stainless steel interior — coved corners on all edges make cleaning fast between services; one GN1/1 shelf per door. Heavy-duty castors — fully mobile; unit can be placed against the wall with rear clearance. Specifications Brand FED-X Model / MPN XGNS1300D Type Salad/Noodle/Sandwich Prep Bar Fridge Net Capacity 218 L Gross Volume 368 L GN Pan Slots (top) 8 × GN1/6 Shelves 1 × GN1/1 per door Doors 3 × Hinged Doors Temperature Range +2 to +8°C Max Ambient Temperature 32°C, 60% RH Refrigerant R290 Cooling System Fan-assisted Compressor Embraco/Secop Controller Dixell (digital) Power 240V, 240W / 1.6A Construction Stainless Steel interior & exterior Internal Dimensions 1295 × 595 × 455mm Product Dimensions (W × D × H) 1368 × 700 × 1020mm Packed Dimensions (W × D × H) 1390 × 730 × 1160mm Net Weight 104 kg (supplier) / 130 kg (store — verify) Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: Ideal for restaurants, cafes, pubs, clubs, bars, and pizza shops that need fast topping access at the prep or service line. Browse our full range of Salad Bar Fridges or explore all FED-X refrigeration for complementary units.Installation & delivery: Requires a single-phase 240V/10A GPO. Unit can be positioned against the wall. Allow rear and side airflow clearance as directed in the installation guide. Dispatched Australia-wide.Frequently asked questionsWhat is the net capacity of the XGNS1300D?The XGNS1300D has a net capacity of 218 L across its three compartments. The gross volume is 368 L.Does the XGNS1300D use natural refrigerant?Yes — it uses R290, a natural hydrocarbon refrigerant with a low global warming potential (GWP of 3), compliant with current Australian standards.How many GN pans does the top rail hold?The hinged stainless steel lid opens to eight GN1/6 pan slots. Pans and pan covers are not included and must be sourced separately. Pan covers must be in place during operation to maintain the correct temperature.Can the XGNS1300D be placed against a wall?Yes — the unit is designed to sit flush against the wall. The compressor exhausts appropriately for this configuration; refer to the installation guide for exact clearance requirements.What warranty does the FED-X XGNS1300D carry?The XGNS1300D is covered by 2 years parts and labour plus a further 2 years parts-only coverage — 4 years total — when registered within 14 days of invoice.

Read more less

FED-X S/S Four Door Upright Freezer - XURF1200S2V Net Capacity: 1200L Cooling System: Fan forced cooling Temperature range: -18~-22°C Compressor: Cubigel Controller: Dixell Ambient Temperature: 43°C RH: 40% Refrigerant: R290 Stainless steel interior and exterior with rounded corners for easy cleaning Auto defrost Three levels of shelving plus base Self-closing lockable doors with heavy duty magnetic door seals HFCs and CFCs free foam body insulation Tropicalised for Australian conditions User friendly Digital controls and internal lighting Split door design for rapid recovery and energy saving Integrated door handle for easy cleaning Shelf and shelf support are designed to accommodate 2 x 1/1 GN pan Heavy duty evaporator and condenser fans Heavy duty castors with front wheel brakes Weight loading per shelf: 40kg Dimensions (Internal): 1224mm W x 682mm D x 1394mm H 1/2 split door system can lower yearly running cost by up to 30% 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 730W

Read more less

The Benchstar FD-24HB is a commercial electric food dehydrator that dries fruit, meat, herbs and more across 24 stainless steel trays using 360° hot air circulation for even, additive-free results. Why operators choose the FD-24HB 24 stainless steel trays — large batch capacity for fruit harvests, jerky and herb production. Digital temperature & timer control — set anywhere from +30 to +90°C with a 24-hour timer for precise, repeatable drying. 360° hot air circulation — uniform drying without additives, retaining natural flavour and nutrients. Tempered glass door — monitor progress without opening, holding temperature and humidity steady. Food-grade stainless build with overheat protection — durable, BPA-free, with safety cut-out at +120°C. Specifications Brand Benchstar Model / MPN FD-24HB Type Food Dehydrator Power Type Electric Power 240V, 2000W / 10A Trays 24 trays (400 x 380mm) Temperature Range +30 to +90°C Timer 24-hour Overheat Protection +120°C cut-out Material Food-grade Stainless Steel Product Dimensions 470(W) x 600(D) x 883(H)mm Package Dimensions 559(W) x 664(D) x 916(H)mm Net Weight 31.5kg Warranty 1 Year Parts and Labour Venue suitability: Suited to cafes, restaurants, butchers, providores and producers running regular drying batches of fruit, jerky, herbs or garnishes. Browse more Food Dehydrators or the full Benchstar range to compare tray configurations. Installation & delivery: Plug-and-play 240V operation — no special installation required. Dispatched Australia-wide. Frequently asked questions How many trays does the FD-24HB hold? It comes with 24 stainless steel trays, each measuring 400 x 380mm, for large-batch drying. What temperature range does it cover? The digital control sets temperature anywhere from +30 to +90°C, with a 24-hour timer. What power supply does it need? It runs on standard 240V with a 2000W / 10A draw, so it plugs into a normal commercial power point. Is the cabinet stainless steel? Yes — it is built from food-grade stainless steel, is BPA-free, and includes overheat protection that cuts out at +120°C. What warranty is included? The FD-24HB is covered by a 1 year parts and labour warranty.

Read more less