Federal Hospitality Equipment

The Benchstar FW4L-092 is a four-lamp commercial heating lamp that holds plated and bulk food at serving temperature across two stainless steel tiers, keeping pizza, chips, fried chicken and buffet dishes hot and presentable on the pass. Why operators choose the FW4L-092 Four heat lamps — even radiant coverage across both shelves so plated food stays at temperature without drying out. Individual switches per tier — run only the level you need and save power during quieter service. 201 stainless steel housing — corrosion-resistant construction that wipes down fast in a busy pass. Adjustable holding heat — a +30 to +90°C range lets you match the warmth to each dish. Tungsten filament heating tubes — instant heat-up with reliable, energy-efficient performance. Specifications Brand Benchstar Model / MPN FW4L-092 Type Heating Lamp Lamps 4 Power 240V, 720W, 10A Temperature range +30 to +90°C Construction 201 stainless steel Product dimensions 900(W) x 300(D) x 650(H)mm Packed dimensions 914(W) x 394(D) x 239(H)mm Net weight 14 kg Warranty 1 Year Parts & Labour Venue suitability: The FW4L-092 suits cafes, pizzerias, takeaways, food courts and buffets that need to hold cooked food at the pass between cooking and service. It sits within our range of heating lamps and the wider Benchstar bench-top range for fit-outs building a complete servery line. Installation & delivery: Plugs into a standard 240V power point — no special installation required. Dispatched Australia-wide. Frequently asked questions How many heat lamps does the FW4L-092 have? It has four heat lamps spread across two tiers for even coverage of plated and bulk food. What power supply does it need? It runs on 240V single-phase at 720W (10A) from a standard power point. What temperature range does it hold? The warmer holds food between +30 and +90°C, adjustable to suit different dishes. Can I control each shelf separately? Yes — it has individual switches per tier, so you can run only the level you need. What warranty is included? The FW4L-092 comes with a 1 Year Parts & Labour warranty.

Read more less

The Benchstar DH-580E is a countertop pie warmer and hot food display that holds prepared pies, pastries and hot snacks at safe serving temperature behind toughened glass, ready for impulse sale at the counter. Why operators choose the DH-580E 60-pie capacity across 4 shelves — 569 x 300mm shelves merchandise a full counter run of pies and pastries in one compact footprint. Toughened glass front and back — a clear two-sided display that lets staff and customers see the product while keeping it warm. Thermostat-controlled 30-80°C — an easy-to-read, accurate temperature gauge holds food at a safe, consistent serving heat. All stainless steel structure — durable, robust and easy to wipe down, with a crumb tray at the bottom for quick clean-up. Sliding glass doors and anti-slip feet — convenient rear access for restocking and a stable, non-marking benchtop footing. Specifications Brand Benchstar Model / MPN DH-580E Type Pie Warmer & Hot Food Display Pie capacity 60 pies Display shelves 4 (569 x 300mm), fixed Doors 2 sliding glass doors Glazing Toughened glass front and back Construction All stainless steel Temperature range 30-80°C, thermostat controlled Power 240V; 1.0kW / 10A (single phase) Product dimensions 640(W) x 334(D) x 526(H)mm Packed dimensions 650(W) x 390(D) x 370(H)mm Net weight 18 kg Country of manufacture China Warranty 12 months return to base Venue suitability: Ideal for cafes, bakeries, takeaway shops, service stations and convenience stores that sell hot pies, sausage rolls and pastries from the front counter. As a compact countertop pie warmer from Benchstar, it suits venues where bench space is limited but visible hot-food merchandising drives impulse purchases. Installation & delivery: Plugs into a standard 240V 10A power point with no installation required — place on a level bench, switch on and set the thermostat. Dispatched Australia-wide. Frequently asked questions How many pies does the DH-580E hold? It holds up to 60 pies across 4 fixed display shelves measuring 569 x 300mm each. What temperature range does it operate at? The thermostat-controlled cabinet holds food between 30°C and 80°C, with an easy-to-read temperature gauge. What power supply does it need? It runs on a standard single-phase 240V supply, drawing 1.0kW (10A), so it plugs into an ordinary power point. Can customers see the food from both sides? Yes — the cabinet has toughened glass on the front and back, so it can be merchandised from either side of the counter. What warranty does it come with? The DH-580E is covered by a 12-month return-to-base warranty.

Read more less

Benchtop Heated Bain Marie ZCK165BT-1 Key Features Comes With 150 mm 1/1 Pan & Lid Drain Valve Analogue Temp. Control All Stainless Steel No Exposed Elements Elements Are Separate (Hidden) From Tank, For Safety, To Prevent Corrosion & For Ease Of Cleaning Wet Use Only - Warranty Will Be Void If Run Dry Temperature Range ˚C : +30 to +80   1 Year Return to Base Warranty Power: 240V; 1.2kW

Read more less

BakerMax Compact Countertop Double Deck Electric Pizza Oven EP-2T/15 Key Features Stainless steel structure Comes with a ceramic hearth in the cavity Cavity Size 410x420x120mm Stone Size 400x400mm Compact size for small kitchens Temperature range: 50-350°C 60 minutes timer with bell Analogue temperature control Temperature Reach Indication light Viewing window Internal lighting Efficient drop-down door design Rubber foot Bakelite handle 2 Years Parts and Labour WarrantyProduct Dimensions: 580(W) x 561(D) x 435(H)mmPower: 240V; 3kW/15A

Read more less

10 Litre Planetary Mixer Gear DriveB10KG This smaller model has a power rating of (720/10 W/A) with dimensions set at (452×432×606). This speed mixer comes to us from Bakermax, one of our biggest catering equipment suppliers today, bringing use the finest, most widely used products. Made for use in bakeries and pizzerias – this planetary mixer is the go-to equipment appliance to mix dough and dough portions together to create a firmer texture for baking, cooking or later use. F.E.D. mixers are tough & reliable with the highest quality electrical & mechanical components• All mixers have a stainless steel bowl & come standard with dough hook, beater & whisk• Three-speed gearbox • Special motors for reliability & long life• Superior design to other machines on the market • Interlocked safety guard• Max dry flour: 2kg• Bowl capacity: 10L• Motor Power(W): 450 • Speed(RPM): 110/178/355 2 Years Parts and Labour Warranty Power: 720W; 10A required

Read more less

HR-6 Compact Food Process 6L Variable Speed See-through lid to monitor processing from start to finish Stainless steel bowl with locking mechanism Stainless steel blade assembly Easy to use & clean Compact model Additional ingredient can be added while processing 1 Year Return to Base WarrantyPower: 240V; 1800W; 10A outlet required

Read more less

The Blizzard SN-420P is a self-contained cube ice maker that pairs a modular ice head with an integrated storage bin to keep busy venues supplied with clear, hard cube ice throughout service. Why operators choose the SN-420P Up to 189kg/24h output — high daily production for bars, restaurants and function venues. ~125kg bin storage — a large integrated bin (bin-control setting approx. 110kg) buffers peak demand. 22mm³ cube ice — slow-melting, clear cubes ideal for beverages and food service. Air-cooled operation — simple installation with no separate water-cooling loop. Quality components — Aspera compressor, EBM-Papst fan and Morrill water pump for reliable, serviceable running. Specifications Brand Blizzard Model / MPN SN-420P Type Self-Contained Cube Ice Maker Ice Production (24h) Up to 189kg Bin Storage Capacity Approx. 125kg (bin control approx. 110kg) Ice Shape 22mm³ cube Cooling Air-cooled Refrigerant R404A Doors 1 (hinged) Construction Stainless Steel Power 240V; 920W; 10A Product Dimensions 560(W) x 860(D) x 1745(H)mm Net Weight 85kg Certification Watermark certified Warranty 2 Years Parts & Labour Venue suitability: Suited to high-demand hospitality settings — bars, restaurants, cafes, clubs and function venues that need a steady supply of cube ice through service. As an air-cooled self-contained unit it installs against a wall with adequate ventilation and a standard 10A power point. Browse the full range of Self Contained Ice Makers or see more equipment from Blizzard to match this unit to your kitchen. Installation & delivery: Supplied with a 10A plug and lead for straightforward connection; allow clearance around the unit for air-cooled ventilation. Dispatched Australia-wide. Frequently asked questions How much ice does the SN-420P produce per day? It produces up to 189kg of cube ice in a 24-hour period, suiting high-volume venues. How much ice can the bin store? The integrated storage bin holds approximately 125kg, with a bin-control setting of approximately 110kg. What ice shape does it make? It produces 22mm³ cube ice — clear, slow-melting cubes ideal for beverages and food presentation. Is the SN-420P air-cooled or water-cooled? It is air-cooled, so it does not require a separate water-cooling connection; just allow ventilation clearance around the unit. What warranty does it come with? The SN-420P is supplied with a 2-year parts and labour warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Blizzard SN-25C is a compact underbench bullet ice maker that produces up to 25kg of hard, clear bullet ice every 24 hours from a slim 375mm-wide cabinet. Its spray-type evaporator builds dense, slow-melting ice, making it ideal for small bars, cafes and offices where bench and floor space is tight.Why operators choose the SN-25C Up to 25kg/24h bullet ice - right-sized output for cafes, small bars and staff rooms Slim 375mm width - fits underbench in tight service areas Spray-type evaporator - produces clear, high-hardness bullet ice (28mm dia. x 40mm) Approx. 15kg internal bin - on-board storage for immediate use Stainless steel exterior - durable and easy to clean in commercial settings WaterMark certified - suitable for plumbed installation to Australian standards Specifications Brand Blizzard Model / MPN SN-25C Type Underbench self-contained ice maker Ice type Bullet (28mm dia. x 40mm) Ice output Up to 25kg / 24h Bin storage Approx. 15kg Condenser Air-cooled Refrigerant R290 (90g) Power 240V / 50Hz; 300W; 10A External material Stainless steel Product dimensions 375(W) x 575(D) x 762(H)mm Packed dimensions 665(W) x 470(D) x 740(H)mm Net weight 39kg Country of manufacture China Certification WaterMark certified Warranty 2 years parts and labour Venue suitability: A strong fit for space-limited venues with modest ice needs - espresso bars, small cafes, offices, medical rooms and bar service stations - where the slim 375mm underbench footprint matters more than volume. For high-turnover bars or restaurants, step up to a higher-output model.Compare more self-contained ice makers or browse the wider Blizzard range to size up if you need more output.Installation & delivery: Connects to a standard 240V/10A single-phase outlet with a plumbed water supply; the unit is WaterMark certified for Australian installation. Dispatched Australia-wide. Backed by a 2-year parts and labour warranty.Frequently asked questionsHow much ice does the Blizzard SN-25C make per day? It produces up to 25kg of bullet ice every 24 hours, with an internal bin holding approximately 15kg.Will the SN-25C fit underbench? Yes. It measures 375(W) x 575(D) x 762(H)mm, so it slots into most standard underbench cavities in bars and cafes.What kind of ice does it make? It makes hard, clear bullet ice roughly 28mm in diameter x 40mm, which melts slowly and is ideal for drinks service.Is the SN-25C suitable for Australian plumbing? Yes. It is WaterMark certified for connection to a plumbed water supply to Australian standards.Does it need ongoing maintenance? Yes. Replace the water filter cartridge every 6 months and descale regularly to keep ice quality high and maintain the warranty. 2 Years Parts and Labour Warranty  All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.

Read more less

The Modular Systems SMS-H is a commercial single mop sink designed for kitchens, cafes, and facilities that require a dedicated cleaner's station. Constructed from SUS304 (18/8) stainless steel at 1.2 mm gauge with a hairline finish, the fully welded bowl is polished inside and out for easy cleaning and long service life.Why operators choose the SMS-H Deep, wide mop bowl — 520 mm wide × 515 mm deep × 800 mm high unit accommodates full-size mop heads and buckets without splashing. SUS304 (18/8) stainless steel construction — 1.2 mm gauge material resists rust and corrosion in high-moisture environments. Fully welded, polished bowl — seamless interior eliminates food and grime traps; polished inside and out for hygiene compliance. 90 mm diameter drain hole — fast drainage clears standing water quickly after use. 2-year parts warranty — backed by Modular Systems for commercial peace of mind. Specifications Brand Modular Systems Model / MPN SMS-H Type Single Mop Sink / Cleaner's Sink Material SUS304 (18/8) Stainless Steel Gauge 1.2 mm Finish Hairline Bowl Fully welded, polished inside & out Drain Hole Diameter 90 mm Product Dimensions (W × D × H) 520 × 515 × 800 mm Packed Dimensions (W × D × H) 570 × 660 × 570 mm Net Weight 10 kg Country of Manufacture China Warranty 2 Years Parts Only Venue suitability: Ideal for commercial kitchens, cafes, restaurants, aged care facilities, schools, and any venue requiring a dedicated mop and cleaning sink station. Browse our full range of Cleaner's Sink / Mop Sink options or explore all Modular Systems stainless steel equipment.Installation & delivery: Wall-mounted backsplash allows against-wall installation. Adjustable feet for levelling on uneven floors. Dispatched Australia-wide.Frequently asked questionsWhat is the bowl depth of the SMS-H?The overall unit height is 800 mm. The bowl sits on a pedestal with adjustable legs; overall internal working depth accommodates standard mop heads. The full unit dimensions are 520 mm wide × 515 mm deep × 800 mm high.What drain size does the SMS-H use?The SMS-H has a 90 mm diameter drain hole. Ensure your plumbing waste point matches this size or use an appropriate adapter.Is the SMS-H suitable for floor mounting?Yes. The unit stands on adjustable feet for floor installation. The integrated backsplash mounts against a wall to prevent splash and protect the surface behind.What grade of stainless steel is the SMS-H made from?The SMS-H is constructed from SUS304 (18/8) stainless steel at 1.2 mm gauge — the standard commercial food-service grade offering strong corrosion resistance in wet environments.What does the warranty cover?The Modular Systems SMS-H is covered by a 2-year parts-only warranty. Labour and installation are not included. Contact your supplier for warranty claims.

Read more less

The Yasaki HR-12 is a compact commercial food processor (bowl cutter) built for high-volume prep in busy kitchens. A 2000W variable-speed motor and 12 L stainless steel bowl chop, mix, emulsify and purée sauces, dressings, marinades and mince in seconds.Why operators choose the HR-12 2000W motor with variable speed for fine control across different ingredients 12 L stainless steel bowl with a secure locking mechanism Stainless steel blade assembly for durable, repeatable cutting See-through lid lets staff monitor processing from start to finish Central feed opening so ingredients can be added safely while running Specifications Brand Yasaki Model / MPN HR-12 Type Food Processor Bowl Capacity 12 L Bowl & Blade Material Stainless Steel Power 240V; 2000W; 10A outlet required Product Dimensions 575(W) x 316(D) x 489(H) mm Packed Dimensions 575(W) x 385(D) x 520(H) mm Net Weight 22 kg Country of Manufacture China Warranty 2 Years Return to Base Venue suitability: Ideal for cafes, restaurants, caterers and central kitchens that batch-prep sauces, dips, marinades and minced items but have limited bench space.Browse more options in our food & veg processors range or see the full Yasaki line-up.Installation & delivery: Plugs into a standard 10A single-phase outlet—no special installation required. Dispatched Australia-wide.Frequently asked questionsHow big is the bowl on the HR-12? The HR-12 has a 12 L stainless steel bowl, suited to batch processing in commercial kitchens.What power supply does the HR-12 need? It runs on 240V single phase and draws 2000W, so a standard 10A outlet is required.Can ingredients be added during processing? Yes—the see-through lid has a central feed opening so ingredients can be added safely while the unit is running.Is the bowl and blade stainless steel? Yes, both the bowl and the blade assembly are stainless steel for durability and easy cleaning.What warranty does the HR-12 come with? The HR-12 is covered by a 2-year return-to-base warranty.

Read more less

Single Door Food Warmer Cart - HT-40S 40 pan capacity (1/1GN pan 530x325x65mm, pans not included) 30 - 90°C Even convection heating Designed to be easily cleaned Solid S/S doors Adjustable temp. control Buit in water tray to increase humidity Temperature gauge Low energy use design Castors Come with 2 optional side handle attachments for moving the machine safely and steadily Rubber bumper at the bottom for extra protection Door handle with lock Machine dimension (mm): 720W x 900D x 1763H (width after installing handles 877mm) 1 Year Parts and Labour Warranty Power: 1800W; 10A  

Read more less

Sunmixer Mini Pre Rinse Unit with 180mm Riser and 560mm Hose T98001MN-1 Key Features Water Efficiency Star Rating: ★★★ Mini pre-rinse unit Deck mounted type Heavy duty construction 7inch (180mm) riser 22inch (560mm) flexible stainless- steel hose Spray valve The product includes check valve to prevent cross flow The spray valve conforms to ANSI / ASTN F2324-03 Ideal for food service, commercial kitchens, restaurants and hotel applications Spring body Finger Hook for Spray Head Can connect to both hot water and cold water Warranty: 2 Years Parts Only Certified Product Power:

Read more less

Sunmixer Deck Mounted Faucet with 2 side-handles T20138 Key Features Water Efficiency Star Rating: ★★★★ Deck mounted type 2 sde-handles Can connect to both hot water and cold water Warranty: 2 Years Parts Only Certified Product Power:

Read more less

The Modular Systems DSB6-1500L/A is a commercial double left sink bench with pot undershelf, built from 304-grade stainless steel (SUS304 18/8) for demanding kitchen environments. At 1500mm wide with two left-positioned bowls and a right-hand draining area, it handles the heavy washing loads of busy hospitality and food-service operations. Why operators choose the DSB6-1500L/A SUS304 (18/8) stainless steel benchtop — 1.2mm thick, XPS-board lined with 15mm wet edge for durability and hygiene Two fully welded left bowls — 400 x 400 x 300mm each, polished inside and out, with 90mm drain hole per bowl Integrated splashback — 150mm high, 40mm thick, bevelled and fully enclosed Pot undershelf included — 38mm outer frame tubes with 25mm inner tubes at 40mm spacing; optional leg brace available on request Adjustable stainless steel disc feet — 42mm diameter legs (1.2mm SS), fully adjustable for uneven floors; castor kits available Flat-packed with tools and manual — quick assembly design reduces on-site setup time Specifications Brand Modular Systems Model / MPN DSB6-1500L/A Type Double Sink Bench Width 1500 mm Depth 600 mm Height 900 mm (+ 150mm splashback) Bowl Count 2 Bowl Position Left Bowl Size 400mm W x 400mm D x 300mm H Drain Hole Diameter 90 mm Material SUS304 (18/8) Stainless Steel Steel Thickness 1.2 mm Splashback Height 150 mm Splashback Thickness 40 mm Leg Diameter 42 mm (1.2mm SS) Net Weight 36.4 kg Product Dimensions 1500(W) x 600(D) x 900(H)mm Packed Dimensions 1570(W) x 670(D) x 530(H)mm Packed Weight 52 kg Warranty 2 Years Parts Only Venue suitability: Ideal for commercial kitchens, cafe preparation areas, catering facilities, school canteens, and any food service workspace requiring dedicated washing and prep zones with pot storage beneath. Browse our full range of Commercial Stainless Steel Sinks or explore the complete Modular Systems range for compatible benches and shelving. Installation & delivery: Supplied flat-packed with instruction manual and all assembly tools. Simply assemble on-site with no specialist trades required. Dispatched Australia-wide. Frequently asked questions What is the bowl size on the DSB6-1500L/A?Each of the two bowls measures 400mm wide x 400mm deep x 300mm high, with a 90mm drain hole. This is the 600mm bench-depth configuration. Is assembly required, and what tools are needed?Yes — the bench ships flat-packed for safe transport. All assembly tools and an instruction manual are included in the carton. No specialist trades are required. Can I get a leg brace instead of the pot undershelf?Yes. A free optional leg brace can replace the pot undershelf. Specify leg brace on your order if required. What is the warranty on this sink bench?The DSB6-1500L/A carries a 2-year parts-only warranty from Modular Systems. Is the stainless steel grade food-safe?Yes — the benchtop and bowls are constructed from SUS304 (18/8) stainless steel, the standard grade for commercial food-service applications. Bowls are fully welded and polished inside and out for hygiene and easy cleaning.

Read more less

The F.H.E 1500-6-DSBR is a stainless steel double sink bench with a right-hand twin-bowl layout, built for washing, prep and pot work in commercial kitchens. It measures 1500 x 600 x 900mm with a 100mm rear splashback and pairs a 1.2mm 304-grade stainless top with a galvanised undershelf and adjustable legs. Why operators choose this bench 1.2mm 304-grade stainless top — food-safe, corrosion-resistant and easy to keep hygienic in a wet wash area. Two deep bowls (right-hand) — a 400 x 400 x 250mm and a 400 x 500 x 250mm bowl give you wash-and-rinse capacity with workspace to the left. 100mm splashback — keeps water and debris off the wall behind the bench. Galvanised undershelf & legs — sturdy under-bench storage for tubs, chemicals and cleaning gear. Adjustable legs — level the bench on uneven kitchen floors. Flat-packed — ships compact for easy self-assembly and tight-access installs. Specifications Brand F.H.E Model / MPN 1500-6-DSBR Type Stainless Steel Sink Bench Overall dimensions 1500 x 600 x 900mm Splashback 100mm rear splashback Bowls 400 x 400 x 250mm + 400 x 500 x 250mm Sink position Right Top 1.2mm 304-grade stainless steel Undershelf & legs Galvanised steel, adjustable legs Assembly Flat-packed for self-assembly Material Stainless Steel (304 top) Country of manufacture China Warranty 24 months parts Venue suitability: A practical wash and prep bench for cafes, restaurants, bars, bakeries and commercial kitchens that need twin-bowl washing-up against a wall with bench space alongside. Browse the full range of Dishwasher Inlet Sinks & Outlet Benches to match this bench to your warewashing line. Installation & delivery: Supplied flat-packed for easy self-assembly; adjustable legs let you level the bench on uneven floors. Dispatched Australia-wide. Frequently asked questions Which side are the sinks on? The 1500-6-DSBR is the right-hand version, with both bowls positioned to the right and a flat work area to the left. What size are the two bowls? One bowl is 400 x 400 x 250mm and the other is 400 x 500 x 250mm, both 250mm deep. What grade of stainless steel is the top? The top is 1.2mm 304-grade stainless steel; the undershelf and legs are galvanised steel. How tall is the bench? The bench is 900mm high to the worktop, plus a 100mm rear splashback. Does it come assembled? No — it ships flat-packed for easy self-assembly, which keeps freight compact and helps with tight-access installs.

Read more less

The Modular Systems DSC-1800R-H is a stainless steel kitchen tidy cabinet that combines a double-bowl right-hand sink with enclosed storage to keep busy commercial kitchens clear of clutter. Bowls, doors and drawers are built into a single 1800mm pre-assembled unit with all-welded joins. Why operators choose the DSC-1800R-H 304 (18/8) stainless construction — 1.2mm top and frame with a hairline finish for a hard-wearing, hygienic surface. Two right-hand sink bowls — 450 x 450 x 300mm 'punched' bowls with a 90mm drain hole for fast prep and wash-up. Integrated storage — sliding doors plus a bank of drawers hide clutter and free up bench space. 150mm rear splashback — protects the wall and keeps the work zone tidy. Pre-assembled, all-welded joins — arrives ready to position with no on-site assembly. Specifications Brand Modular Systems Model / MPN DSC-1800R-H Type Stainless Steel Cabinet Sink configuration Two right-hand bowls Bowl size 450 x 450 x 300mm Drain hole 90mm dia. Material 304 (18/8) Stainless Steel Top & frame gauge 1.2mm Doors & drawers gauge 0.9mm Finish Hairline Splashback 150mm rear Product dimensions 1800(W) x 700(D) x 1050(H)mm Package dimensions 1820(W) x 720(D) x 1130(H)mm Construction Pre-assembled, all-welded joins Country of manufacture China Warranty 2 Years Parts Only Venue suitability: Suited to open-plan and front-of-house commercial kitchens, cafes and bars where wash-up and concealed storage need to sit in one tidy stainless unit. It is a natural fit alongside our Commercial Kitchen Cabinets range and the wider Modular Systems stainless line. Installation & delivery: Arrives pre-assembled with all-welded joins, ready to position and connect to existing plumbing. Dispatched Australia-wide. Frequently asked questions What grade of stainless steel is used? The top and frame are 1.2mm 304 (18/8) stainless steel with a hairline finish, and the doors and drawers are 0.9mm stainless. How many sinks does it have and which side? It has two bowls positioned on the right-hand side of the unit, each 450 x 450 x 300mm with a 90mm drain hole. What are the overall dimensions? The cabinet is 1800mm wide, 700mm deep and 1050mm high overall, which includes a 150mm rear splashback. Does it require assembly? No. The cabinet is supplied pre-assembled with all-welded joins, so it only needs positioning and plumbing connection. What warranty is included? The DSC-1800R-H comes with a 2 Years Parts Only warranty.

Read more less

The Thermaster BD600F is a 600-litre commercial chest freezer purpose-built for high-volume foodservice environments. Its dual 304 stainless steel solid hinged lids, R290 natural refrigerant, and digital temperature control deliver reliable deep-freeze performance at -18 to -22°C — making it an ideal bulk-storage solution for large commercial kitchens, butchers, seafood retailers, and catering operations. Why operators choose the BD600F 600 L gross capacity with six removable wire baskets (570×225×170 mm) — maximise frozen stock organisation without losing access to the base of the chest Energy-efficient R290 natural refrigerant — low global-warming potential and strong thermal performance for continuous commercial use Digital temperature control with LED display — at-a-glance monitoring and precise set-point adjustment down to -22°C Dual 304 stainless steel solid hinged lids — robust, hygienic, and lockable for secure frozen storage Energy-saving fan & efficient compressor — keeps running costs down during continuous operation Manual defrost with LED interior light — full visibility into the chest and straightforward maintenance Castor wheels for easy repositioning — move the unit between service areas without tools or lifting 4-year warranty when registered within 14 days — 2 years parts & labour + 2 years parts only Specifications Brand Thermaster Model / MPN BD600F Type Commercial Chest Freezer Lid Type Solid — Dual 304 Stainless Steel Hinged Lids Capacity 600 L Temperature Range -18 to -22°C Refrigerant R290 Natural Refrigerant Baskets 6 × 570×225×170 mm (removable) Power 240 V / 270 W / 10 A Ambient Temperature 32°C / 55% RH Defrost Type Manual Mobility Castor wheels Product Dimensions (W×D×H) 1800 × 792 × 873 mm Packed Dimensions (W×D×H) 1850 × 775 × 1032 mm Net Weight 64.5 kg Colour White body, stainless steel lid Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: Ideal for commercial kitchens, catering companies, butchers, fishmongers, convenience stores, supermarkets, and food-production facilities requiring large-volume bulk-frozen stock storage. Browse our full range of Commercial Chest Freezers or explore more products from Thermaster. Installation & delivery: The BD600F arrives fully assembled. Allow adequate clearance on all sides for ventilation. Castor wheels allow on-site repositioning once delivered. Dispatched Australia-wide. Frequently asked questions What is the lid type on the BD600F — solid or glass?The BD600F has dual solid 304 stainless steel hinged lids. It is not a glass-lid model. The solid lids provide better insulation and a more hygienic, lockable closure for bulk frozen storage. What refrigerant does the BD600F use?The BD600F uses R290, a natural hydrocarbon refrigerant with a very low global-warming potential. R290 is widely used in modern commercial refrigeration for its energy efficiency and environmental credentials. How many baskets are included?Six removable wire baskets (570×225×170 mm each) are supplied. They can be repositioned or removed entirely to accommodate bulk or oversized items. What temperature range does the BD600F achieve?The BD600F operates between -18 and -22°C, making it suitable for storing frozen meat, seafood, ice cream, and other frozen foodservice products in high-volume commercial settings. What warranty is included?Thermaster provides 2 years parts & labour plus an additional 2 years parts-only cover — 4 years total — when the product is registered within 14 days of invoice. Contact your supplier for registration details.

Read more less

The Thermaster LG-208HC is an under-bench two-door bar cooler that keeps bottled and canned drinks at serving temperature within easy reach of the bar, in a compact black colourbond cabinet sized to slide beneath a counter. Why operators choose the LG-208HC Twin hinged glass doors — double-glazed, self-closing and lockable, so cold air stays in and stock stays secure during service. Compact under-bench footprint — 900mm wide and 835mm high to fit beneath most back-bar counters while still holding 150 litres of drinks. Digital temperature control — front-mounted readout holds a steady +2 to +8°C across two adjustable shelf levels plus the floor. Built for a busy venue — rated to a 38°C / 65% RH ambient with auto defrost and interior lighting, suited to a fast-paced bar environment. Specifications Brand Thermaster Model / MPN LG-208HC Type Bar Fridge Net Volume 150 L Gross Volume 188 L Doors 2 (hinged glass, double-glazed) Temperature Range +2 to +8°C Max Ambient 38°C / 65% RH Power 240V; 280W Total Energy Consumption 1.759 kWh/24h External Dimensions 900(W) x 530(D) x 835(H)mm Packed Dimensions 950(W) x 570(D) x 920(H)mm Net Weight 75 kg Body Colourbond Steel Colour Black Defrost Automatic Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: The compact under-bench format suits clubs, pubs, bars and restaurants that need fast-access drink storage right at the point of service without taking up upright fridge space. Pair it with the rest of the Commercial Bar Fridges range or browse the full Thermaster refrigeration line-up to match capacity to your venue. Installation & delivery: Allow 100mm wall clearance for ventilation and a standard 240V GPO. Dispatched Australia-wide. Frequently asked questions What is the capacity of the LG-208HC? It has a 150 litre net (188 litre gross) capacity across two adjustable shelf levels plus the floor. What temperature does it hold? The digital controller maintains a +2 to +8°C drink-serving range, rated to a 38°C / 65% RH ambient. How many doors does it have? Two hinged, double-glazed glass doors that are self-closing and lockable. What are the external dimensions? 900(W) x 530(D) x 835(H)mm, designed to fit under a standard back-bar counter. What warranty does it come with? 2 years parts and labour, plus an extra 2 years parts only when the unit is registered.

Read more less

The Thermaster SC248SG is a two-door stainless steel bar fridge built to chill and merchandise bottled and canned drinks within easy reach of the service line. Double-glazed hinged glass doors hold +2 to +8°C while putting stock on show. Why operators choose the SC248SG 202 L gross capacity — two shelf levels plus the floor for a full bar's worth of cans and bottles. Fan-forced evaporator cooling — even temperatures from front to back, even when doors open often. Double-glazed self-closing doors with locks — hold the cold and secure stock after service. Digital temperature control and read-out — set and check the running temperature at a glance. Stainless steel exterior with auto defrost — wipe-clean and low-maintenance behind the bar. Specifications Brand Thermaster Model / MPN SC248SG Type Bar Fridge Doors 2 (hinged glass) Gross capacity 202 L Net capacity 133 L Temperature range +2 to +8°C Max ambient 32°C Cooling Fan-forced evaporator Defrost Automatic Power 240V; 112W / 10A Energy consumption 1.931 kWh / 24h Exterior Stainless steel Product dimensions 900(W) x 535(D) x 900(H)mm Packed dimensions 950(W) x 580(D) x 1050(H)mm Net weight 75 kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: A natural fit for the back bar in pubs, hotels, sports clubs and restaurants where chilled drinks need to be visible and within arm's reach during service. It sits well alongside the rest of our Commercial Bar Fridges range and the wider Thermaster refrigeration line-up. Installation & delivery: Plugs into a standard 240V GPO; allow 100mm wall clearance for ventilation. Dispatched Australia-wide. Frequently asked questions What temperature does the SC248SG hold? It runs from +2 to +8°C, suited to chilling bottled and canned drinks. How many doors does it have? Two hinged, double-glazed glass doors, both self-closing and lockable. What is the capacity? 202 litres gross (133 litres net usable), across two shelf levels plus the floor. What power supply does it need? A standard 240V single-phase outlet; it draws 112W / 10A. What warranty is included? 2 years parts and labour, plus an extra 2 years parts only when the product is registered within 14 days of invoice.

Read more less

The FryMAX RC500ELPG is a single-tank LPG gas tube fryer built for high-volume frying in commercial kitchens, pairing a 37 litre oil capacity with a 137.5 MJ/h multi-jet tube burner.Why operators choose the RC500ELPG 137.5 MJ/h multi-jet tube burner — fast heat recovery for back-to-back frying through peak service. 37L oil capacity in a 44L tank — fries large batches with headroom, rated to a 43kg/hr production rate. Tube-over-cold-zone design — food particles fall below the burner tubes into a cold zone, extending oil life. Full stainless steel construction — front, door, tank and trim wipe down fast and stand up to daily service. Flame failure protection & standby pilot — safe, reliable Millivolt mechanical controls with easy start-up. 32mm full-port drain valve — clog-resistant draining and front-accessible, replaceable components for quick servicing. Specifications Brand FryMAX Model / MPN RC500ELPG Type LPG Gas Tube Fryer Gas Output 137.5 MJ/h Power Type LPG Oil Capacity 37 L Tank Capacity 44 L Production Rate 43 kg/hr Temperature Range 120°C to 200°C Baskets 3 Controls Millivolt mechanical External Dimensions 534(W) x 759(D) x 1195(H)mm Packed Dimensions 800(W) x 600(D) x 1200(H)mm Net Weight 78 kg Gas Inlet 1/2 inch Certification IAPMO approved #GMK10174 Material Stainless Steel Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (registered within 14 days) Venue suitability: The RC500ELPG suits restaurants, takeaways, fish & chip shops, clubs and pubs that fry in volume and run on LPG. Browse the full range of Deep Fryers, or see more from FryMAX for matching cookline equipment.Installation & delivery: This fryer connects to an LPG gas supply and must be installed by a licensed gas fitter. Dispatched Australia-wide.Frequently asked questionsWhat is the oil capacity of the FryMAX RC500ELPG? The RC500ELPG holds 37 litres of oil in a 44 litre tank, making it suited to high-volume frying.What gas does the RC500ELPG run on? It runs on LPG and has a gas output of 137.5 MJ/h via a multi-jet tube burner.How many baskets does it come with? The RC500ELPG is supplied with 3 baskets and a stainless steel lid as standard.What temperature range does it cover? The fryer operates from 120°C to 200°C using Millivolt mechanical controls.Does the RC500ELPG include a warranty? Yes — 2 years parts and labour, plus an additional 2 years parts only when the product is registered within 14 days of invoice.

Read more less

The FED-X XF400SS is a 340-litre single solid-door upright storage freezer built for demanding commercial kitchens. It runs on natural R290 refrigerant, maintains a -22 to -18°C temperature range, and combines a stainless steel exterior with rounded internal corners for easy cleaning and long-term hygiene compliance.Why operators choose the XF400SS True commercial capacity — 340 L gross volume handles high-volume frozen storage for restaurants, caterers, and food service operations. Eco-friendly R290 refrigerant — CFC & HCFC free, 60 mm high-density insulation keeps running costs low and temperatures stable. Digital temperature control & readout — precise monitoring at a glance; locking door protects stock integrity. Durable stainless steel exterior — corrosion-resistant, easy to wipe down, suited to busy back-of-house environments. Mobility & installation flexibility — rear castors for repositioning, front adjustable legs for levelling on uneven floors. Specifications Brand FED-X Model / MPN XF400SS Type Upright Storage Freezer Capacity 340 L Doors 1 Door Type Solid, hinged Temperature Range -22 to -18°C Ambient Temperature 30°C, 55% RH Refrigerant R290 Power 240V, 384W / 10A Power Type Electric Insulation 60 mm high-density foam, CFC & HCFC free Construction Stainless Steel exterior; rounded internal corners Defrost Manual Cooling System Static cooling Product Dimensions (W x D x H) 600 x 585 x 1850 mm Packed Dimensions (W x D x H) 646 x 642 x 1990 mm Net Weight 69 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration) Venue suitability: Ideal for restaurants, cafes, catering operations, hotel kitchens, and food prep facilities requiring a reliable single-door upright freezer for bulk frozen storage. The compact 600 mm footprint suits tight back-of-house layouts. Browse the full range in our Commercial Upright Freezers collection, or explore other FED-X refrigeration equipment.Installation & delivery: This unit ships fully assembled and requires only a standard 240V / 10A power outlet. Allow clearance at the rear for ventilation. Regular manual defrosting is required to maintain optimal performance. Dispatched Australia-wide.Frequently asked questionsWhat temperature does the XF400SS operate at?The XF400SS maintains a temperature range of -22 to -18°C, suitable for standard commercial frozen food storage.What refrigerant does the XF400SS use?It uses R290 (propane), a natural and eco-friendly refrigerant that is CFC and HCFC free, compliant with current environmental standards.Does the XF400SS require manual defrosting?Yes, regular manual defrosting is necessary to maintain performance and energy efficiency.What are the electrical requirements?The XF400SS requires a standard 240V / 10A power outlet and draws 384W.What warranty comes with the XF400SS?It includes 2 Years Parts & Labour plus 2 Years Parts Only warranty, subject to product registration with FED-X.

Read more less

The FED-X XR600SG is a single glass-door upright display fridge that keeps drinks and chilled product visible, organised and at safe serving temperature in front-of-house refrigeration. Why operators choose the XR600SG 570 L gross capacity — generous merchandising volume in a single upright footprint. Single glass door, lockable — full product visibility with secure overnight storage. Digital temperature control & read-out — holds a steady -1 to +5°C for reliable chilled display. Static cooling with fan — even cooling across the fixed shelves. Natural R600a refrigerant & 50mm insulation — eco-friendly, energy-conscious operation. Specifications Brand FED-X Model / MPN XR600SG Type Upright Display Fridge Capacity (gross) 570 L Door Single glass, lockable Temperature range -1 to +5°C Max ambient 25°C, 60% RH Refrigerant R600a (natural) Cooling Static cooling with fan Insulation 50mm high-density (CFC & HCFC free) Construction Stainless steel exterior Temperature control Digital, with read-out Power 240V; 462W; 10A Product dimensions 777(W) x 695(D) x 1890(H)mm Packed dimensions 752(W) x 823(D) x 1890(H)mm Net weight 100 kg Packed weight 116 kg Warranty 2 years parts & labour + 2 years parts only (with product registration) Venue suitability: Ideal for cafes, takeaways, convenience stores, delis and bottle shops needing front-of-house chilled display of drinks and packaged product in a compact upright footprint. It sits naturally alongside our range of upright display fridges and the wider FED-X refrigeration line-up. Installation & delivery: Plugs into a standard 240V 10A outlet — no special installation required. Position on its adjustable front legs and rear castors, leave clearance for the bottom-mounted condenser, and allow it to settle before loading. Dispatched Australia-wide. Frequently asked questions What is the capacity of the XR600SG? It has a 570 L gross volume in a single upright cabinet. What temperature range does it hold? It maintains -1 to +5°C, suitable for chilled drinks and packaged product, in ambient conditions up to 25°C / 60% RH. What refrigerant does it use? It runs on natural R600a refrigerant, which is CFC and HCFC free. Does the door lock? Yes — the single glass door is lockable for secure overnight storage while keeping product on display during trade. What power supply does it need? A standard 240V supply, drawing 462W on a 10A circuit.

Read more less

The FED-X XUB7C18S3V is a 3-door solid-door underbench storage fridge built for high-volume commercial kitchens that need reliable low-profile refrigeration with a full 1795mm worktop footprint. Fan-forced cooling, a Dixell digital controller, and tropicalisation for Australian ambient conditions up to 43°C make it a workhorse for prep stations, pass-throughs, and production lines. Why operators choose the XUB7C18S3V 417 L gross capacity across three doors — each section independently accessible, minimising temperature loss during service Fan-forced cooling with Embraco/Secop compressor — rapid recovery rate maintains consistent -2 to +8°C even under heavy door-opening cycles GN1/1 pan-compatible shelves — 1 shelf per section (40 kg capacity each), fits standard gastronorm pans without adapters Self-closing doors with heavy-duty magnetic seals — prevents accidental temperature drift; stainless interior and exterior with rounded corners for easy cleaning Tropicalised for Australian conditions — rated to 43°C ambient; 60mm HFC/CFC-free foam insulation and R290 natural refrigerant Specifications Brand FED-X Model / MPN XUB7C18S3V Type Undercounter Storage Fridge Capacity 417 L (gross) Temperature Range -2 to +8°C Refrigerant R290 Cooling System Fan forced Compressor Embraco/Secop Controller Dixell digital Ambient Temperature Rating 43°C Doors 3 solid hinged, self-closing Shelves 1 per door (GN1/1 compatible, 40 kg capacity each) Internal Dimensions 1234 x 580 x 564mm External Dimensions 1795(W) x 700(D) x 850(H)mm Packed Dimensions 1825(W) x 730(D) x 910(H)mm Net Weight 121 kg Insulation 60mm HFC/CFC-free foam Power 240V; 50Hz; 10A; 235W Construction Stainless steel interior & exterior Mobility Heavy-duty castors with front wheel brakes Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: Ideal for restaurants, cafes, hotel kitchens, catering operations, and food-production facilities that need high-capacity underbench refrigeration at a prep or pass-through station. The 1795mm worktop doubles as prep surface. Suitable for tropical and high-ambient environments. Browse our full range of Under Bench Fridges or explore more FED-X refrigeration equipment. Installation & delivery: The XUB7C18S3V ships pre-assembled on castors — position, plug into a standard 10A GPO, and it is operational. Unit can be placed directly against a wall (rear condenser clearance not required). Dispatched Australia-wide. Frequently asked questions What is the net usable capacity of the XUB7C18S3V?The gross volume is 417 L across three sections. The usable (net) capacity is 311 L as measured per Australian convention. What refrigerant does the XUB7C18S3V use?It uses R290 (propane), a natural refrigerant with very low global-warming potential and zero ozone-depletion potential — compliant with current and anticipated Australian regulations. Can I store GN1/1 pans directly on the shelves?Yes. Each of the three sections includes one GN1/1-compatible shelf rated to 40 kg. Full-size gastronorm pans slide straight in without adapters or additional rack conversions. Is the unit suitable for a Queensland or Northern Territory kitchen?Yes. The XUB7C18S3V is tropicalised for Australian conditions with an ambient temperature rating of 43°C, making it suitable for hot and humid kitchens found in tropical climates. What is the warranty on the XUB7C18S3V?FED-X provides 2 Years Parts & Labour plus a further 2 Years Parts Only, giving 4 years total coverage — provided the unit is registered within 14 days of invoice date.

Read more less

The FED-X XVRX1800/380S is a 1800mm countertop prep fridge (salad bench) designed for high-volume food preparation in commercial kitchens. It features two hinged stainless steel lids, static cooling with a Donper compressor, and Dixell digital temperature control, holding product at +2 to +8°C for safe holding of prepped ingredients through service. Why operators choose the XVRX1800/380S Eight GN 1/3 pan positions — maximise mise en place coverage during peak service with angled pan positions and 150mm max pan depth across the full 1800mm bench width. Two-door access — split access along the bench means multiple cooks can work the station simultaneously without disrupting adjacent prep areas. Stainless steel throughout — interior and exterior construction for hygiene, durability, and compliance with commercial kitchen standards. Reliable static cooling — Donper compressor with Dixell digital controller ensures consistent +2 to +8°C holding without air blast drying out produce. Heavy-duty condenser fans — maintain performance in demanding ambient environments up to 38°C. Pan divider included — quick organisation of prepped ingredients; pans are sold separately, giving you flexibility on GN sizing. Specifications Brand FED-X Model / MPN XVRX1800/380S Type Countertop Prep Fridge (Salad Bench) Capacity 8 x GN 1/3 Doors 2 Door Type Hinged Temperature Range +2 to +8°C Max Ambient Temperature 38°C at 60% RH Cooling System Static cooling Compressor Donper Controller Dixell digital Max Pan Depth 150 mm Pan Divider Included (pans not included) External Material Stainless Steel (interior & exterior) Power 240V; 50Hz; 10A; 110W Power Type Electric (Single Phase) Width 1800 mm Depth 395 mm Height 281 mm Product Dimensions 1800(W) x 395(D) x 281(H) mm Packed Dimensions 1890(W) x 460(D) x 460(H) mm Net Weight 32 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: Ideal for high-volume cafes, restaurants, delis, sandwich bars, pizza stations, and catering operations requiring fast access to prepped ingredients across a wide service run. The 1800mm width suits double-staffed prep stations and high-output service lines, while the 281mm body height fits under most standard bench heights. Browse our full range of Countertop Prep Fridges or explore all FED-X refrigeration equipment. Installation & delivery: Single-phase 240V — plugs into a standard 10A outlet with no special installation required. Ensure adequate airflow clearance around the condenser. Dispatched Australia-wide with stock held in Sydney, Brisbane, Melbourne, and Perth for faster regional delivery. Frequently asked questions Do pans come included with the XVRX1800/380S?No. The unit includes a pan divider but pans are sold separately. It accommodates GN 1/3 pans up to 150mm deep across 8 positions. What is the power requirement?The XVRX1800/380S runs on single-phase 240V / 50Hz and draws 10A at 110W — compatible with a standard 10A GPO. What warranty is included?FED-X provides 2 years parts and labour plus an additional 2 years parts only, provided the unit is registered within 14 days of invoice date. What is the maximum ambient temperature the unit can operate in?The XVRX1800/380S is rated for ambient temperatures up to 38°C at 60% relative humidity — suitable for most commercial kitchen environments. What is the capacity and how many GN pans does it hold?The bench holds 8 x GN 1/3 pans (up to 150mm deep) in angled positions across the 1800mm width, with a pan divider included for quick organisation of prepped ingredients.

Read more less