Federal Hospitality Equipment

DS1000 - 10x10x10mm DicingPower:

Read more less

SOFR-90TS Stand for Fast Line Oven Range 15 × 2/3 GN or 440×350 trays* 620mmWx580Dx900H *Pans, trays not includedPower:

Read more less

The Modular Systems 1200-6-WB-S is a set of stainless steel legs with a double centre brace designed for 600mm-deep modular commercial kitchen bench systems. Engineered to provide a stable, hygienic underframe for modular workbench configurations, these legs deliver the structural foundation for a range of bench-top and sink units across the Modular Systems range.Why operators choose the 1200-6-WB-S Double centre brace — adds rigidity across the 1200mm span, reducing flex under load in busy kitchen environments. 600mm depth — matches standard 600-series Modular Systems bench and sink tops for seamless integration. Stainless steel construction — hygienic, corrosion-resistant, and easy to clean in commercial wash-down environments. 900mm working height — standard commercial kitchen bench height for ergonomic food preparation. Modular system compatibility — designed to pair with Modular Systems bench tops, sink units, and accessories for a configured run. Specifications Brand Modular Systems Model / MPN 1200-6-WB-S Type Stainless Steel Legs with Double Centre Brace Width 1200 mm Depth 600 mm Height 900 mm Product Dimensions 1200(W) x 600(D) x 900(H)mm Packed Dimensions 670(W) x 1270(D) x 200(H)mm Material Stainless Steel Warranty 1 Year Parts Only Venue suitability: Suited to commercial kitchens, cafe fit-outs, food production facilities, and hospitality venues requiring a modular bench configuration. Ideal for operators building a custom workbench or sink run using the Modular Systems range. Browse our full range of Commercial Stainless Steel Sinks and Modular Systems to complete your bench configuration.Installation & delivery: These legs arrive flat-packed and are assembled on-site using standard tools. No electrical or gas connection required. Dispatched Australia-wide.Frequently asked questionsWhat bench tops are compatible with the 1200-6-WB-S?These legs are designed for the Modular Systems 600mm-deep range. Pair them with a matching 1200mm-wide bench top or sink unit from the Modular Systems catalogue.What is the working height?The legs set a working height of 900mm, which is the standard commercial kitchen bench height.What warranty applies?The 1200-6-WB-S carries a 1 Year Parts Only warranty from Modular Systems.Can these legs support an undershelf?The double centre brace design provides the structural support needed for additional shelving components. Refer to the Modular Systems range for compatible undershelf accessories.Are these legs suitable for a wet area?Yes — stainless steel construction makes these legs suitable for wet prep and wash-down areas typical of commercial kitchens.

Read more less

SOFF-90TS Stand for Fast Line Oven Range 15 × 1/1 GN or 600×400 trays* 750mmWx580Dx900H *Pans, trays not includedPower:

Read more less

The Modular Systems YC-3 is a refrigerated cold bain marie food service cart designed to hold pre-chilled food at a safe 2–5°C during service. It accommodates 4 × 1/2 GN and 1 × 1/1 GN pans (max. pan height 150 mm) and moves easily on four castors (two with brake), making it ideal for buffet lines, cafeteria counters, and mobile service stations.Why operators choose the Modular Systems YC-3 Safe cold holding at 2–5°C — keeps pre-chilled food within the safe serving zone throughout service. Versatile GN pan configuration — accepts 4 × 1/2 GN and 1 × 1/1 GN pans (max. 150 mm deep) to suit a variety of menu items. Mobile and manoeuvrable — four castors including two braked wheels for safe positioning on the floor. All stainless steel construction — robust, hygienic, and easy to clean for commercial kitchen demands. Low power draw — 240 V / 500 W (0.5 kW) single phase; plugs into a standard GPO. Specifications Brand Modular Systems Model / MPN YC-3 Type Cold Bain Marie / Refrigerated Food Service Cart Pan Configuration 4 × 1/2 GN + 1 × 1/1 GN (max. pan height 150 mm) Temperature Range 2–5°C (cold food holding only — not designed to cool product) Power 240 V; 500 W (0.5 kW) — Single Phase Power Type Electric Construction Stainless Steel Width 1060 mm Depth 668 mm Height 900 mm Product Dimensions 1060(W) × 668(D) × 900(H) mm Packed Dimensions 1330(W) × 770(D) × 980(H) mm Net Weight 83 kg (per FED; store lists 106 kg — verify) Mobility 4 castors (2 with brake) Warranty 1 Year Parts and Labour Country of Manufacture China Venue suitability: The YC-3 suits cafeterias, hospitals, aged-care facilities, school canteens, hotels, and event catering operations where cold food must be held ready for service and repositioned between service areas. Explore our full range of Cold Bain Maries or browse all Modular Systems catering equipment.Installation & delivery: Plug-in 240 V single-phase connection — no dedicated circuit required. Arrives fully assembled on castors. Dispatched Australia-wide.Frequently asked questionsIs the YC-3 designed to cool food down?No — the YC-3 is a cold food holding unit only. Food must be pre-chilled before loading. It maintains a temperature of 2–5°C to keep food safe during service, but it is not a blast chiller or refrigerator designed to reduce food temperature.What GN pans does the YC-3 accept?The unit ships with 4 × 1/2 GN and 1 × 1/1 GN pans included. Maximum pan depth is 150 mm. Standard-depth GN pans fit the top opening.What power supply does the YC-3 require?The YC-3 runs on 240 V single-phase and draws 500 W (0.5 kW). It can be plugged into a standard 10 A GPO — no dedicated electrical circuit is required.Can the YC-3 be moved during service?Yes — it is mounted on four castors, two of which have brakes to hold the unit in position. It is designed to be repositioned between service areas as needed.What warranty does the YC-3 carry?The Modular Systems YC-3 is covered by a 1-year parts and labour warranty.

Read more less

The Modular Systems 1800-5-WB-S is a set of stainless steel legs with a double centre brace, engineered for commercial kitchen workbench frames in the Modular Systems range. The double brace configuration delivers enhanced lateral rigidity across the full 1800mm span, making this a reliable structural component for busy food preparation environments. Why operators choose the 1800-5-WB-S Double centre brace — dual reinforcement across the 1800mm span for superior stability compared to single-brace alternatives 1800mm width coverage — sized for full-length commercial bench runs without mid-span flex 500mm depth profile — compact footprint suits standard and wall-mounted bench configurations Stainless steel construction — corrosion-resistant and easy to clean, meeting commercial kitchen hygiene standards 900mm working height — standard ergonomic bench height for standing food prep Specifications Brand Modular Systems Model / MPN 1800-5-WB-S Type Stainless Steel Bench Leg Frame with Double Centre Brace Width 1800mm Depth 500mm Height 900mm Product Dimensions 1800(W) x 500(D) x 900(H)mm Packed Dimensions 570(W) x 1870(D) x 200(H)mm Material Stainless Steel Barcode 9354525006599 Warranty 1 Year Parts Only Venue suitability: Suited to commercial kitchens, catering operations, food manufacturing facilities, and hospitality venues building or replacing stainless steel workbench frames. Particularly well-suited to high-traffic prep areas where bench rigidity is critical. Browse the full Modular Systems range for compatible benchtops, sinks, and accessories, or explore our Commercial Stainless Steel Sinks to pair with your workbench build. Installation & delivery: Designed to integrate with Modular Systems bench components. No welding required — bolt-together assembly. Dispatched Australia-wide. Frequently asked questions Q: What does the double centre brace do?A: The double centre brace spans the width of the leg frame, adding lateral rigidity and preventing racking or flex under load across the 1800mm span. Q: What are the overall dimensions of the 1800-5-WB-S?A: The leg frame measures 1800(W) x 500(D) x 900(H)mm, with packed dimensions of 570(W) x 1870(D) x 200(H)mm. Q: What material is the 1800-5-WB-S made from?A: The frame is constructed from stainless steel, suitable for commercial kitchen environments. Q: What warranty applies to the 1800-5-WB-S?A: Modular Systems provides a 1 Year Parts Only warranty on this product. Q: Is this compatible with Modular Systems benchtops and sinks?A: Yes — the 1800-5-WB-S is part of the Modular Systems range and is designed to pair with compatible Modular Systems benchtops and accessories. Confirm exact compatibility with your benchtop model before ordering.

Read more less

The Modular Systems MDS-6-700 is a mobile stainless steel work stand that provides kitchen teams with flexible, lockable storage on the move — 3 deep drawers on heavy-duty swivel castors keep tools and mise-en-place exactly where they are needed without cluttering a fixed bench run.Why operators choose the MDS-6-700 Three full-depth drawers — keep utensils, smallwares, and prep materials organised and immediately to hand. All-stainless construction — hygienic, wipe-clean surfaces meet commercial kitchen standards. Mobile on castors — reposition the unit between service areas or clean underneath without lifting. Compact footprint — 700 mm wide fits standard bench-run gaps and passes through most kitchen doorways. 2-Year Parts Warranty — backed by Modular Systems for commercial environments. Specifications Brand Modular Systems Model / MPN MDS-6-700 Type Mobile Work Stand Width 700 mm Depth 600 mm Height 900 mm Product Dimensions 700(W) x 600(D) x 900(H) mm Packed Dimensions 770(W) x 670(D) x 870(H) mm Net Weight 38 kg (supplier) / 42 kg (store — minor discrepancy, verify) Drawer Count 3 Mobility Castors Material Stainless Steel Country of Manufacture China Warranty 2 Years Parts Only Venue suitability: Suited to commercial kitchens, catering operations, institutional food service, and hospitality prep areas requiring mobile storage. Explore our full range of Commercial Kitchen Cabinets and the complete Modular Systems range for benches, sinks, and storage solutions.Installation & delivery: No installation required — arrives ready to use. Castors allow immediate positioning on-site. Dispatched Australia-wide.Frequently asked questionsWhat is the drawer configuration on the MDS-6-700?The unit has 3 drawers stacked vertically within the 700 x 600 x 900 mm cabinet body. All drawers are stainless steel construction.Are the castors lockable?The unit is described as having castors for mobility. Confirm with the supplier whether locking brakes are included, as this is not specified in the published data.What is the material grade?The MDS-6-700 is described as all stainless steel by Modular Systems and F.E.D. A specific 304 grade is not stated in the published specification — contact us to confirm if grade certification is required.What warranty is provided?The MDS-6-700 carries a 2-year parts-only warranty from Modular Systems.Does the MDS-6-700 require any electrical connection?No. This is a fully passive storage unit with no power requirement.

Read more less

The Modular Systems 1200-5-WB-S is a stainless steel workbench leg frame with a double centre brace, designed as the 500mm-deep base for a Modular Systems Mix & Match benchtop or stone counter in a commercial kitchen.Why operators choose the 1200-5-WB-S Double centre brace — twin cross members add rigidity so the frame carries a heavy stone or stainless top without flexing. Stainless steel construction — corrosion-resistant and easy to wipe down in a wet commercial environment. Lower support rail — the undershelf-support brace lets you add a shelf and stiffens the leg assembly. Adjustable feet — level the frame on uneven kitchen floors. 500mm depth — a compact footprint for prep runs and wall-side benches. Specifications Brand Modular Systems Model / MPN 1200-5-WB-S Type Stainless Steel Workbench Leg Frame Material Stainless Steel Bracing Double centre brace with lower support rail Feet Adjustable Width 1200 mm Depth 500 mm Height 900 mm Product Dimensions 1200(W) x 500(D) x 900(H)mm Packed Dimensions 1270(W) x 570(D) x 200(H)mm Warranty 1 Year Parts Only Venue suitability: Suited to restaurants, cafes, commercial and institutional kitchens that need a sturdy base frame for a fabricated bench or stone counter. Browse the full range in Stainless Steel Benches or see the matching range from Modular Systems.Installation & delivery: Ships flat-packed for on-site assembly; level the adjustable feet once positioned. Dispatched Australia-wide.Frequently asked questionsWhat is the 1200-5-WB-S? It is a stainless steel leg frame with a double centre brace that forms the 500mm-deep base for a Modular Systems workbench or stone-counter top.What are the dimensions? The frame measures 1200mm wide, 500mm deep and 900mm high.Does it include a benchtop? No. This item is the leg frame only; the benchtop or stone counter is selected separately from the Mix & Match range.Is the frame height adjustable? The feet are adjustable for levelling on uneven floors; the nominal frame height is 900mm.What warranty applies? The 1200-5-WB-S carries a 1 year parts-only warranty.

Read more less

The Modular Systems MBS118 is a double-bin mobile station built for front-of-house and back-of-house waste and utility management in commercial kitchens, cafes, and food-service venues. Constructed entirely in stainless steel with lockable castors, it provides a hygienic and mobile solution for waste segregation and storage.Why operators choose the MBS118 Mobile design — lockable castors allow repositioning across prep, service, and dishwashing zones. Dual-bin storage — two lower storage compartments accommodate waste bins for efficient separation. Open top shelf — flat stainless steel work shelf for plates, bus tubs, or supplies. All-stainless construction — easy to clean, corrosion-resistant, and suited to high-humidity kitchen environments. 2-year parts warranty — backed by Modular Systems' standard commercial warranty. Specifications Brand Modular Systems Model / MPN MBS118 Type Stainless Steel Cabinet Width 1180 mm Depth 550 mm Height 1260 mm Product Dimensions 1180(W) x 550(D) x 1260(H) mm Package Dimensions 1230(W) x 600(D) x 1350(H) mm Net Weight 68 kg Door Count 2 Material Stainless Steel Mobility Castors (lockable) Country of Manufacture China Warranty 2 Years Parts Only Venue suitability: The MBS118 is suitable for restaurants, cafes, catering operations, hotel kitchens, aged care facilities, and any food-service environment requiring a mobile, hygienic waste or utility station. Explore our full range of Commercial Kitchen Cabinets or browse complementary Commercial Stainless Steel Sinks.Installation & delivery: No installation required — unit arrives assembled on castors. Dispatched Australia-wide.Frequently asked questionsWhat is the MBS118 used for?The MBS118 is a mobile bin station designed to hold two waste bins in a lower cabinet section, with an open stainless steel shelf on top for utility storage in commercial kitchens.Does the MBS118 come with bins?The product is supplied as a mobile cabinet station. Bins are not confirmed as included — check with your supplier for inclusion details.What are the dimensions of the MBS118?The unit is 1180 mm wide x 550 mm deep x 1260 mm high. Packed dimensions are 1230(W) x 600(D) x 1350(H) mm.Is the MBS118 suitable for outdoor use?The MBS118 is designed for indoor commercial kitchen environments. While stainless steel is corrosion-resistant, it is not rated for outdoor or exposed-weather installations.What warranty does the MBS118 carry?The MBS118 is covered by a 2-year parts-only warranty from Modular Systems.

Read more less

The VC VC55MF is a multi-function commercial vegetable cutter that slices, grates, chips, dices and juliennes a continuous feed of vegetables and fruit at up to 300 kg/h — built for high-throughput prep in busy commercial kitchens. Why operators choose the VC55MF Continuous-feed throughput — processes up to 300 kg/h so prep keeps pace with service. One machine, many cuts — precision slicing, grating, chipping, dicing and julienne from a single unit. Half-moon feed hopper — wide opening and feed tube handle both bulk and long produce. Interlocked safety cut-off switch — motor stops when the hopper is opened for safe operation. Easy to clean — round-cornered polished magnalium housing; food-contact parts are dishwasher safe. Specifications Brand VC Model / MPN VC55MF Type Vegetable cutter (multi-function) Output 300 kg/h Functions Slice, grate, chip, dice, julienne Motor 350 rpm Cutting disc 205 mm Discs Sold separately Feed Half-moon hopper + feed tube Safety Interlocked cut-off switch Housing Polished magnalium Power 240V; 550W; 10A single phase Product dimensions 585(W) x 305(D) x 555(H)mm Packed dimensions 580(W) x 300(D) x 540(H)mm Net weight 26 kg Country of manufacture China Warranty 2 years return to base Venue suitability: Ideal for cafes, restaurants, caterers, salad bars, aged-care and institutional kitchens that prep large volumes of vegetables daily and need consistent, repeatable cuts. Browse the full range of veg prep machines, or see more from VC for matching prep equipment. Installation & delivery: Plugs into a standard 240V 10A outlet — no special wiring required. Dispatched Australia-wide. Frequently asked questions What is the output of the VC55MF? The VC55MF processes up to 300 kg/h on continuous feed, making it suited to high-volume prep. What cuts can it produce? It slices, grates, chips, dices and juliennes, depending on the disc fitted. Are cutting discs included? No — discs are sold separately so you can match them to the cuts you need. What power supply does it need? A standard 240V 10A single-phase outlet; the motor draws 550W. Is it easy to clean? Yes — the polished magnalium housing has round corners and the food-contact parts are dishwasher safe.

Read more less

FS100 - 10x10mm French FryPower:

Read more less

The Modular Systems SSB6-1400R is a 1400mm single sink bench with splashback engineered for professional kitchen and food-service environments that demand reliable hygiene and long-term structural integrity. Why operators choose the SSB6-1400R 304-grade stainless steel benchtop, 1.2mm thick — SUS304 (18/8) construction with ripple surface finish resists corrosion and heavy daily use. 150mm splashback with bevelled edges — protects walls and wet areas; fully enclosed 40mm-thick profile. Right-hand drainer configuration — positions the prep zone to the left of the bowl for efficient flow in AU commercial kitchens. Adjustable stainless steel disc feet — 42mm Ø legs with polished disc feet level the bench on uneven floors. Flat-packed with tools and manual — quick on-site assembly; lockable castor kits available separately. Specifications Brand Modular Systems Model / MPN SSB6-1400R Type Single Sink Bench Overall Width 1400 mm Overall Depth 600 mm Overall Height 850 mm (working height 900 mm) Bowl Size 410 W × 310 D × 200 H mm Drain Hole 90 mm Ø Drainer Side Right Splashback Height 150 mm Splashback Thickness 40 mm (bevelled, fully enclosed) Benchtop Material 1.2 mm SUS304 (18/8) stainless steel, ripple finish Wet Edge 15 mm Legs 42 mm Ø, 1.2 mm stainless steel with adjustable polished disc feet Reinforcement Stainless steel U-channel supports + 15 mm XPS board lining Product Dimensions 1400 W × 600 D × 850 H mm Packed Dimensions 1470 W × 670 D × 530 H mm Net Weight 27 kg Country of Manufacture China Warranty 24 months — 2 years parts only Assembly Flat-packed; tools and manual included Venue suitability: Suited to commercial restaurant kitchens, catering facilities, café prep areas, school canteens, aged-care kitchens, and food-manufacturing wash stations requiring an NSF-style stainless prep surface with integrated sink and splashback. This bench fits neatly into a commercial stainless steel sinks fitout, and pairs naturally with other Modular Systems stainless equipment for a cohesive kitchen build. Installation & delivery: Arrives flat-packed for fast on-site assembly using the included tools and manual. Lockable castor kits are available as an optional add-on. Dispatched Australia-wide. Frequently asked questions What does the 'R' suffix mean on SSB6-1400R?The R indicates the drainer is positioned on the right-hand side of the bowl, making the prep zone run left-to-right — the most common layout for AU commercial kitchens. What grade and thickness is the stainless steel?The benchtop is 1.2 mm SUS304 (18/8 grade) stainless steel with a ripple surface finish and 15 mm XPS board lining beneath for rigidity. What are the bowl dimensions?The welded bowl measures 410 mm wide × 310 mm deep × 200 mm high with a 90 mm diameter drain hole, polished inside and out. Can I add wheels to move the bench?Yes — lockable castor kits are available as an optional accessory. The standard configuration ships with adjustable stainless steel disc feet. How does the bench arrive and how long does assembly take?The SSB6-1400R ships flat-packed with all required tools and an instruction manual. Most operators complete assembly in under 30 minutes without specialist trades.

Read more less

Milk Jug Rinsers Counte Top Model SP-MJR1 Rinsing milk jugs between each use is both sanitary and beneficial in produces quality textured milk. It is both easy to use and maintain, the unit is ready to connect, includes water inlet and drainage connections and it can easily be adapted to fit any espresso bar. 160mmW×180D×120H 1.25kG 12 Months Parts only WarrantyPower:

Read more less

MS116 Mobile cabinet with 4 Drawers and 3 ShelvesALL STAINLESS STEEL• 540 mm deep × 1400 mm high• 4 x drawers• Three levels of solid shelving 2 Years Parts only WarrantyPower:

Read more less

The Modular Systems 1500-5-WB-S is a stainless steel leg frame assembly with a double centre brace, designed to form the structural base of a 1500mm wide, 500mm deep commercial kitchen workbench. Supplied as a complete leg-and-brace unit with an undershelf rail, it accepts a bench top and undershelf panel from the Modular Systems range to build a finished workstation. Why operators choose the 1500-5-WB-S 1500mm working width — spans a full-length prep or pass station 500mm depth — compact footprint that suits wall-run bench layouts Double centre brace — cross-bracing along the length adds rigidity under load Undershelf rail included — bottom rail ready to accept a lower shelf panel Modular Systems compatibility — pairs with the full F.E.D. bench-top and undershelf range Specifications Brand Modular Systems Model / MPN 1500-5-WB-S Type Stainless Steel Bench Leg Frame (Accessory) Material Stainless Steel Width 1500mm Depth 500mm Height 900mm Packed Dimensions 570(W) x 1570(D) x 200(H)mm Warranty 1 Year Parts Only Venue suitability: Suitable for commercial kitchens, catering facilities, food prep areas, and hospitality venues building or replacing benches from the Modular Systems range. Browse the full range of Stainless Steel Benches or explore the complete Modular Systems collection for compatible bench tops, undershelves, and accessories. Installation & delivery: Direct-fit component — pairs with Modular Systems bench tops and undershelf panels. No cutting or modification required. Dispatched Australia-wide. Frequently asked questions Q: What does the 1500-5-WB-S include?A: The 1500-5-WB-S is a leg frame assembly with two end frames, a double centre brace rail, and an undershelf bottom rail — ready to receive a bench top and lower shelf panel. Q: What bench top fits the 1500-5-WB-S?A: This frame suits Modular Systems bench tops in the 1500mm wide, 500mm deep configuration. Confirm the bench-top model number with your supplier before ordering. Q: What is the working height?A: The frame height is 900mm — standard commercial kitchen bench height. Q: Can I add an undershelf?A: Yes — the bottom rail is designed to accept a matching Modular Systems undershelf panel (sold separately). Q: What warranty does the 1500-5-WB-S carry?A: 1 Year Parts Only warranty, backed by Modular Systems / F.E.D.

Read more less

Stainless Steel Grating Disc 4mm (dia 175mm) Compatible with MULTIGREEN / MINIGREENPower:

Read more less

Dicing (Semicircular) 14x14x14 work with SA014Power:

Read more less

Cheese Grater/Chopper Feeder handle interlock - Prevents grater from operating unless the handle is down Hopper hand guard grid - For operator safety and injury prevention Direct gear driven motor - Longer wear with no belts or chains to replace Stainless Steel pan and grater drum - For sanitary operation and easy cleaning FOR GRATING HARD CHEESE ONLY680mmW x 335D x 580H 1 Year Return to Base WarrantyPower: 240V; 550W; 10A Outlet Required

Read more less

Deli Displays90° corner external glassREFRIGERATED • 0 to 2°C Foamed, thermoplastic (50mm thick each) side walls, with impressive appearance Stainless steel display Upper structure with panorama liftable curved tempered glass and rear chrome-plated posts Neon lighting Anti-water condensation glass and frontal side gasker with anti-fog heater Large stainless steel working shelf Wide display surface for optimal visibility Internal depth 958mm 1440mmW × 1440D × 1260H 240V; 492W; 10A outlet required 1 Year Parts and Labour WarrantyPower: 240V; 492w; 10A Outlet Required

Read more less

Stainless Steel Slicing Disc 2mm (dia 175mm) Compatible with MULTIGREEN / MINIGREENPower:

Read more less