Commercial fridges for cafés, restaurants, bars, supermarkets and takeaway venues across Australia — more than 900 upright storage chillers, glass-door display and drink fridges, underbench and bar units, prep fridges and cake displays that hold stock at a safe, steady temperature through every service. This is the master fridge category within our commercial refrigeration department, and it pairs with our commercial freezers range when you need frozen storage alongside chilled.
Who commercial fridges are for
If your venue stores, preps or sells anything chilled, a commercial-grade fridge is the unit doing the heavy lifting. Restaurant kitchens run solid-door storage fridges that recover quickly after constant door traffic during prep and service; convenience stores and bottle shops front the floor with multi-door drink fridges that sell by eye; pubs and clubs slot bar fridges under the counter within arm's reach of the tap; bakeries and patisseries merchandise through refrigerated cake displays. A domestic fridge can't do any of these jobs — it isn't rated for hundreds of door openings a day, it struggles to hold below 5°C in a 35-degree summer kitchen, and most don't show the precise temperature readout your food-safety program needs.
What's in scope
Upright storage fridges
The back-of-house workhorse: single, two and three solid-door cabinets in stainless or colourbond that hold bulk ingredients at temperature between deliveries. Start with our solid door upright fridges if storage capacity — not display — is the job.
Display and drink fridges
Glass-door uprights and open-deck merchandisers that turn chilled stock into impulse sales — the format convenience stores, cafés and bottle shops rely on. Browse upright display and beverage fridges in one-, two- and three-door configurations from 218 to 1,500 litres.
Underbench and bar fridges
Counter-height units that keep chilled storage inside the workflow — under the espresso machine, beneath the pass, or behind the bar. See the full range of under bench storage fridges, plus dedicated glass-door bar and backbar formats for drinks service.
Prep, cake and specialty fridges
Refrigerated prep tables for pizza, salad and sandwich stations; curved and square-glass cake displays for front of counter; plus wine cabinets, drawer fridges and dry-age cabinets for venues with a specialty program. Each lives in its own sub-collection if you want to drill down.
How to choose a commercial fridge in three steps
With 900-plus units in the range, three questions narrow it down fast.
Step 1 — Storage or display?
Decide what the fridge is for before looking at sizes. Solid-door storage fridges hold temperature better, run cheaper and suit the kitchen side; glass-door display units trade a little efficiency for visibility, which is exactly what you want where customers choose for themselves. Plenty of venues need one of each — buying a display unit for bulk storage is the most common mis-spec in this category.
Step 2 — Size the capacity, then check the path in
Work from your delivery cycle: the cabinet needs to swallow your biggest order with headroom for air circulation, so think in litres and door count rather than external size alone. Then measure the doorways, corridors and the final position — a two-door upright that won't fit through the back entry is an expensive lesson, and every unit needs ventilation clearance per its spec sheet.
Step 3 — Match the climate rating and power
Australian kitchens get hot, so check the unit's climate class covers the ambient temperature where it will actually sit — especially for tropical-zone venues. Most single-door fridges plug into a standard 10-amp outlet, while some larger multi-door cabinets need a 15-amp circuit, so confirm before delivery day. A digital controller with an external readout also makes your daily HACCP temperature checks a 10-second job.
Want the long-form version with capacity tables and brand comparisons? Our commercial fridge buying guide walks the whole decision through step by step.
A commercial fridge is a refrigeration cabinet rated for business use — it holds food and drink at or below 5°C through long trading hours, frequent door openings and warm kitchen conditions that would defeat a domestic unit. The category spans upright storage and display fridges, underbench and bar units, refrigerated prep tables and chilled food displays.
Is an industrial fridge different from a commercial fridge?
In Australian retail the terms are used interchangeably — an industrial fridge, a commercial refrigerator and a commercial fridge all describe the same business-rated cabinets sold here. True industrial refrigeration (cool rooms, process chillers) is a separate, installed category; for a restaurant, café or store, a commercial upright or underbench unit is what you're after.
What temperature should a commercial fridge be set to?
Keep chilled food at 5°C or below — most operators set the cabinet between 1°C and 4°C so the load stays in the safe zone even during busy periods. Australian food-safety standards expect potentially hazardous food held under temperature control, and a fridge with a digital external display makes the required checks much easier to log.
Can I get a commercial fridge and freezer in one unit?
Yes — dual-temp cabinets put a fridge and freezer compartment in a single footprint, which suits smaller kitchens that can't fit two uprights. If your frozen volume is significant, though, a separate unit from a dedicated freezer range usually gives more usable space per dollar than a combined cabinet.
Which fridges suit a convenience store?
Convenience stores typically run two- or three-glass-door upright drink fridges as the main wall display, with open-deck or countertop display units near the register for grab-and-go lines. Colourbond exteriors keep the cost down, and LED-lit glass doors do the actual selling.
How much does a commercial fridge cost in Australia?
Entry-level bar and underbench units start under $1,000, single glass-door uprights typically run $1,000–$2,000, and large multi-door storage or display cabinets range from roughly $2,000 to $6,000-plus. Energy efficiency is worth weighing alongside the sticker price — a cheaper cabinet that draws more power can cost more over its life.
How long does a commercial fridge last?
A well-maintained unit commonly gives 10 or more years of service. The habits that get you there are simple: keep the condenser coil clean, wipe door seals and check them for splits, leave the ventilation clearance the manual specifies, and give the cabinet a thorough clean-out at least monthly to keep it hygienic and running efficiently.
Can I get a commercial fridge delivered in Melbourne, Sydney or Adelaide?
Yes — Commercial Kitchen Store ships Australia-wide, including Melbourne, Sydney, Adelaide, Brisbane and Perth metro, from our NSW base. Our 5-star-rated Australian team is on 1300 111 901 if you want help matching a unit to your venue before you order.
Helpful Resources
Planning your commercial fridge purchase? These free guides from our team cover the options, costs and Australian compliance requirements before you buy:
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•2 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 1800mm wide•585lt•Manufacturer Code: NR760V
Product Dimensions: 1800(W) x 1200(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•2 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 1500mm wide•485lt•Manufacturer Code: NR750V
Product Dimensions: 1500(W) x 1200(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•2 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 900mm wide•285lt•Manufacturer Code: NR730V
Product Dimensions: 900(W) x 1200(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•3 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 1500mm wide•605lt•Manufacturer Code: NSR750V
Product Dimensions: 1500(W) x 1350(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•3 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 900mm wide•355lt•Manufacturer Code: NSR730V
Product Dimensions: 900(W) x 1350(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•3 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 1200mm wide•480lt•Manufacturer Code: NSR740V
Product Dimensions: 1200(W) x 1350(H) x 680(D)mm
•Cool white LED strip lighting•Black brushed #304 stainless steel body•Easily removable front and side stainless panels•Easily accessible cooling system and controller for simple cleaning and maintenance•Removable condenser filter for easy cleaning•3 levels frosted glass shelves with stainless steel base shelf•ITO Heated tempered glass front, top and sides•Ambient 32°C at 82% RH•Unit can be run as ambient display by turning on lights only•Ventilated cooling system•Auto defrost•Operating temperature 2°C ~ 8°C •Cold 1800mm wide•735lt•Manufacturer Code: NSR760V
Product Dimensions: 1800(W) x 1350(H) x 680(D)mm
Display your refrigerated products without sacrificing limited floor space, with the Airex Countertop Refrigerated Food Display.
Airex Countertop Refrigerated Displays feature double-glazed heated glass to minimise condensation, whilst maintaining consistent temperature and keeping products looking fresher for longer.
Specifically designed to display ready-to-serve cold foods
Adjustable digital temperature control (from 2°C - 8°C)
Efficient LED lighting for increased product visibility
Frameless glass construction (fully double glazed heated) for exceptional display
Sliding glass doors to rear
Protective coating on refrigeration coil to help prevent corrosion
High quality components including highly efficient compressors
3 tier (adjustable shelvesManufacturer's Warranty: 24 Months Parts & Labour Width: 905 Millimetres or 1224 Millimetres Depth: 575 Millimetres Height: 676 Millimetres Energy Load: 0.23kW or 0.4kW Amp Plug: 10A Tiers: 2 Tier Cabinet Type: Refrigerated
Cake and Food Display case.
Adjustable electronic controller with two digital displays
Heated glass panels front and sides (H model)
Adjustable shelving (height and angle) plus base
Rear double glazed argon doors with a magnetic door catch
On/off switches for lights and heated glass
Two piece white frosted polycarbonate shelves
Each shelf holds up to 40kg’s
Designed for 38°C ambient operation
On castors for mobility, packed in crate for shipment.
Product Dimensions: 1200(W) x 680(D) x 1200(H)mm
Bonvue Chilled Angled Counter-Top Food Display - CTA-196 Key Features: This counter top display unit stands out in the market with its significantly larger display area and an extra shelf, allowing businesses to showcase a greater variety of products prominently. Eco-Friendly Efficiency: Utilizes natural R290 refrigerant, with an exceptional 9 or 10-star GEMS energy rating Enhanced Product Showcase: Offers a larger display area than competitors, featuring an additional shelf for more display space Bright LED Lighting: Dual-sided LED lights create an attractive presentation of contents Precision Temperature Control: Digital temperature controller for accurate adjustments Extra Shelving Advantage: Comes with three adjustable chrome-plated shelves, maximizing display variety Robust Glass Insulation: All sides encased in double tempered glass for safety and thermal efficiency Reliable Cooling System: Ventilating cooling ensures a consistently chilled environment Automatic Defrost Function: Streamlines upkeep by preventing ice build-up Effective Condensation Removal: Three-side airducts adeptly manage moisture, keeping the view unobstructed Convenient Access: Rear sliding doors provide smooth restocking and service Temperature Range: 2 to + 12 Ambient/RH%: 30/50 Warranty: One Year Parts and Labour WarrantyPower: 240V; 200W/10A
The Thermaster MA400 is a commercial dry age fridge that holds beef and other cuts at controlled temperature and humidity to develop tenderness and flavour over a 4-6 week maturing period.Why operators choose the MA400
400 L capacity & adjustable stainless-steel shelving (20 kg per shelf) — ages multiple primals at once.
Humidity control 60-90% via thermostat — dial in the right environment for consistent, repeatable dry ageing.
UVC sterilisation and UV-proof tempered glass door — keeps meat hygienic while staying on display.
Active carbon air filtration and LED lighting — clean air inside and a clear front-of-house showcase.
Auto defrost, auto evaporating and door-open fan stop — low-fuss running and energy saving.
Specifications
Brand
Thermaster
Model / MPN
MA400
Type
Dry Age Fridge
Capacity
400 L
Humidity range
60-90%
Door
1 x UV-proof tempered glass
Shelving
Adjustable stainless-steel, 20 kg per shelf
Lighting
LED
Air treatment
UVC sterilisation + active carbon filtration
Power
240V; 160W; 10A
Material
Stainless Steel
Internal dimensions
585 x 550 x 1380mm
External dimensions
700(W) x 800(D) x 1650(H)mm
Packed dimensions
840(W) x 770(D) x 1860(H)mm
Net weight
102 kg
Warranty
2 years parts & labour + 2 years parts only (registered within 14 days)
Venue suitability: Suited to steakhouses, butchers, restaurants and providores wanting an in-house dry-ageing program with a visible, hygienic display.Browse the full range of Dry Age Fridges or see more refrigeration from Thermaster.Installation & delivery: Plug-in 240V electric — no special installation required. Dispatched Australia-wide.Frequently asked questionsWhat is the dry ageing capacity of the MA400? It has a 400 L internal volume with adjustable stainless-steel shelves rated to 20 kg each, so you can age several primals at once.How is humidity controlled? A built-in thermostat lets you set humidity anywhere between 60% and 90% to suit your ageing program.How long does dry ageing take in this cabinet? The supplier nominates an ideal maturing period of 4-6 weeks, depending on the cut and the result you want.Does it keep the meat hygienic on display? Yes — it combines UVC sterilisation, active carbon air filtration and a UV-proof tempered glass door with LED lighting.What power supply does it need? It runs on a standard 240V supply (160W, 10A), so it plugs into a normal power point with no special installation.
The FED-X XCB-36 is a refrigerated chef base drawer bench that positions cold ingredient storage directly beneath your Gaxmax or compatible cooking equipment, keeping mise en place within arm's reach at pass temperature while freeing up conventional fridge space. With a 184-litre gross capacity across two full-width drawers, it is designed to sit beneath a countertop cooking suite and double as a heavy-duty worktable surface.
Why operators choose the XCB-36
Two full-width refrigerated drawers — keep prepped ingredients cold at the cookline without breaking stride; each drawer runs on Austrian Fulterer runners for smooth, reliable operation
Raised-edge stainless worktop — the flat top doubles as a prep and plating surface directly above the cooking suite, maximising tight kitchen footprints
HFC/CFC-free R290 refrigerant — environmentally compliant refrigerant with fan-forced evaporator cooling for rapid temperature recovery after each drawer open
Tropicalised for Australian conditions — rated to 32°C ambient / 65% RH, purpose-built for hot commercial kitchen environments
Heavy-duty mobility — four castors with front-wheel brakes allow repositioning for cleaning and maintenance without disconnecting the unit
Specifications
Brand
FED-X
Model / MPN
XCB-36
Type
Refrigerated Chef Base / Drawer Fridge
Capacity (Gross)
184 L
Capacity (Net)
162 L
Drawers
2
Temperature Range
-1 to +5°C
Ambient Temperature Rating
32°C / 65% RH
Refrigerant
R290
Power
240V, 396W, 10A
Energy Consumption
3.241 kWh/24h
Construction
Stainless steel interior & exterior, rounded corners
Insulation
60mm HFC/CFC-free foam body insulation
Cooling
Fan-forced evaporator
Controls
User-friendly digital controls
Door Runners
Austrian Fulterer runners
Gaskets
Removable magnetic drawer gaskets
Pan Compatibility
GN pan, 100mm height (sold separately)
Product Dimensions (W x D x H)
924 x 816 x 658mm
Internal Depth
530mm
Packed Dimensions (W x D x H)
886 x 990 x 724mm
Net Weight
85 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XCB-36 suits high-volume kitchens where cookline efficiency is paramount — hotel restaurants, high-turnover cafes, contract catering operations, and food manufacturing with a hot-side cooking suite. Its compact 658mm height places the worktop at a practical pass height beneath countertop cooking equipment. It is tropicalised for the demands of Australian commercial kitchen environments, including high-ambient temperature and humidity conditions.
Explore our full range of Drawer Fridges and the complete FED-X commercial refrigeration lineup.
Installation & delivery: The XCB-36 arrives fully assembled on heavy-duty castors — connect to a standard 240V/10A GPO and it is ready to operate. Ensure a minimum 100mm rear clearance for compressor ventilation. Dispatched Australia-wide.
Frequently asked questions
What GN pan size fits the XCB-36 drawers?Each drawer is compatible with gastronomy pans (GN pans) up to 100mm in height. GN pans are sold separately. The unit requires a GN pan to use the storage function effectively.
Can the XCB-36 support countertop cooking equipment on top?Yes — the raised-edge stainless steel worktop is designed to support compatible countertop cooking equipment, and the unit is purpose-built to serve as a refrigerated base beneath Gaxmax and similar cooking suites. Check the weight rating of your specific cooking equipment against the worktop load specification.
What is the warranty on the XCB-36?The XCB-36 carries a 2-Year Parts & Labour warranty plus an additional 2-Year Parts-Only warranty — 4 years total — when the product is registered within 14 days of invoice date.
Is the XCB-36 suited to hot or humid kitchen environments?Yes — the unit is tropicalised for Australian commercial kitchen conditions and is rated to operate at up to 32°C ambient temperature and 65% relative humidity.
What refrigerant does the XCB-36 use?The XCB-36 uses R290 (propane), an HFC/CFC-free natural hydrocarbon refrigerant. R290 has a very low global warming potential (GWP) and is fully compliant with current Australian environmental standards.
The FED-X XCB-48 is a refrigerated chef base drawer fridge designed to sit beneath commercial cooking equipment and keep cold ingredients at the cook's fingertips. With 263 litres of refrigerated capacity across two full-width drawers, it maintains a consistent -1 to +5°C working temperature and is tropicalised for Australian kitchen conditions.Why operators choose the XCB-48
2-drawer cold storage below the cookline — each drawer holds GN pans (sold separately), keeping prep ingredients within arm's reach of the chef without leaving the station.
Tropicalised for AU conditions — rated to 32°C ambient at 65% RH, so it performs in hot, high-humidity commercial kitchens without hunting or cycling off.
Fan-forced evaporator cooling — rapid recovery rate after door openings keeps product temperature stable during service.
Austrian Fulterer drawer runners — heavy-duty, smooth-glide runners built for repeated daily use; removable drawer gaskets simplify cleaning and maintenance.
Stainless steel interior & exterior with rounded corners — hygienic, wipe-clean surfaces throughout; 60mm HFC/CFC-free foam insulation in the body.
Specifications
Brand
FED-X
Model / MPN
XCB-48
Type
Refrigerated Chef Base / Drawer Fridge
Capacity
263 L
Drawers
2
Door Type
Hinged Doors
Temperature Range
-1 to +5°C
Max Ambient Temperature
32°C / 65% RH
Refrigerant
R290
Power
240V / 396W / 10A
Energy Consumption
3.679 kWh/24h
Body Material
Stainless Steel
Insulation
60mm HFC/CFC-free foam
Width
1228mm
Depth
816mm
Height
655mm
Package Dimensions
1294(W) x 886(D) x 725(H)mm
Net Weight
92 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (48 months total — register within 14 days of invoice)
Venue suitability: Ideal for high-volume commercial kitchens, hotel cooklines, catering operations, and food service venues where maximising worktop space while keeping cold ingredients immediately accessible is a priority. The low-profile design supports standard and heavy-duty cooking equipment placed on top (worktop-load rating per equipment spec). Browse our full range of Drawer Fridges or explore the complete FED-X range.Installation & delivery: Fitted with heavy-duty castors (front-wheel brakes) for easy repositioning. Requires a standard 240V / 10A single-phase power outlet. No gas or plumbing connections required. Dispatched Australia-wide.Frequently asked questionsWhat is the capacity of the XCB-48?The XCB-48 has a gross volume of 263 litres across its two drawers.What refrigerant does the XCB-48 use?The XCB-48 uses R290 (propane), a natural refrigerant with low global warming potential, compliant with Australian commercial kitchen requirements.What temperature range does the XCB-48 maintain?The unit operates between -1°C and +5°C, suitable for storing perishable ingredients at safe food-service temperatures.Are GN pans included with the XCB-48?No — gastronomy pans (GN pans) are sold separately. The drawers are compatible with various GN pan configurations.What is the warranty on the XCB-48?The XCB-48 carries a 2-year parts and labour warranty plus an additional 2 years parts-only warranty (48 months total) when the product is registered within 14 days of the invoice date.
The FED-X XCB-60 is a refrigerated chef base drawer fridge designed to slide under cooking equipment and deliver cold ingredient storage exactly where it is needed at the pass. With a 360L gross capacity and two full-width drawers, it keeps prep within arm's reach of the cook without sacrificing worktop or floor space.
Why operators choose the XCB-60
360L gross capacity across 2 drawers — holds full GN pans at operating height, keeping cold mise en place at the line
-1 to +5°C temperature range — maintains safe chill throughout a busy service without manual adjustment
Fan-forced evaporator cooling with rapid recovery — temperature rebounds quickly after each drawer open
Austrian Fulterer drawer runners — heavy-duty smooth glide rated for continuous commercial use
Stainless steel interior and exterior with rounded corners — fast clean-down between services, no rust risk
Tropicalised for Australian conditions — performs at up to 32°C ambient/65%RH without performance loss
Raised edge top & removable magnetic drawer gaskets — gaskets pull off for deep cleaning; raised edge catches spills from equipment above
Specifications
Brand
FED-X
Model / MPN
XCB-60
Type
Refrigerated Chef Base / Drawer Fridge
Capacity (Gross)
360 L
Capacity (Net)
310 L
Drawers
2
Door Type
Hinged Drawers
Temperature Range
-1 to +5°C
Ambient Temperature (Max)
32°C, 65% RH
Refrigerant
R290-A
Power
240V, 500W, 10A
Total Energy Consumption
4.596 kWh/24h
Construction
Stainless Steel interior & exterior
Insulation
60mm HFC & CFC-free foam
Cooling
Fan-forced evaporator
Mobility
Heavy-duty castors with front-wheel brakes
Pan Height (Drawer)
100mm
Product Dimensions (W x D x H)
1524 x 816 x 658mm
Packed Dimensions (W x D x H)
1590 x 886 x 725mm
Net Weight
105 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Designed for professional kitchen lines where cooking equipment needs refrigerated ingredient storage underneath — suits restaurants, hotels, catering operations, and any high-volume kitchen running a dedicated pass or cook station. Compatible with gastronomy pans (GN pans sold separately). Explore the full range of Drawer Fridges or shop all FED-X refrigeration.
Installation & delivery: Requires a standard 240V/10A power outlet. Allow adequate clearance at the rear for ventilation. Heavy-duty castors allow repositioning on site. Dispatched Australia-wide.
Frequently asked questions
What is a chef base refrigerator?A chef base (also called a refrigerated equipment stand) is a low-profile refrigerated unit designed to sit on the kitchen floor and support cooking equipment on its worktop while storing cold ingredients in drawers at the operator's side — eliminating the need for a separate undercounter fridge at the line.
What pan size fits in the XCB-60 drawers?Each drawer is designed for gastronomy (GN) pans at 100mm pan height. GN pans are sold separately. The raised-edge top also catches spillage from equipment above.
What is the temperature range of the XCB-60?The XCB-60 operates between -1°C and +5°C, keeping chilled ingredients well within the safe food-storage zone during full service.
Is the XCB-60 suitable for hot Australian kitchens?Yes — the unit is tropicalised for Australian conditions and rated for ambient temperatures up to 32°C at 65% relative humidity without performance loss.
What warranty does the XCB-60 come with?The XCB-60 carries a 2-year parts & labour warranty plus an additional 2-year parts-only warranty (4 years total) when the product is registered with FED-X within 14 days of the invoice date.
The FED-X XCB-72 is a refrigerated chef base drawer bench that sits beneath cooking equipment to keep cold ingredients within arm's reach of the cook line. The 1838 mm wide, 450 L unit holds four pull-out drawers cooled to -1–+5°C, eliminating walk-in trips during service.
Why operators choose the XCB-72
4-drawer access — four full-width pull-out drawers put pans of prepped ingredients directly under cooktop equipment, cutting service steps.
Tropicalised for AU conditions — rated to 32°C ambient / 65% RH, engineered for commercial kitchen heat loads common in Australian venues.
Fan-forced R290 refrigerant — HFC & CFC-free R290 refrigerant with fan-forced evaporator delivers rapid temperature recovery after drawer opening.
Heavy-gauge stainless construction — stainless steel interior and exterior with rounded corners; removable drawer gaskets for easy cleaning.
Integrated worktop support — raised-edge stainless top with sufficient load rating to mount Gasmax or equivalent cooking equipment directly above.
Specifications
Brand
FED-X
Model / MPN
XCB-72
Type
Drawer Fridge / Refrigerated Chef Base
Capacity (Gross)
450 L
Capacity (Net)
385 L
Drawers
4
Temperature Range
-1 to +5°C
Refrigerant
R290
Max Ambient Temperature
32°C / 65% RH
Power
240V, 660W, 10A
Energy Consumption
5.132 kWh/24h
Construction
Stainless Steel (interior & exterior)
Product Dimensions (W×D×H)
1838 × 816 × 658 mm
Packed Dimensions (W×D×H)
1908 × 886 × 725 mm
Net Weight
125 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for high-volume restaurants, hotels, catering operations, and any cook line where drawer-access refrigeration below cooking equipment reduces service steps. The 1838 mm width suits full commercial cook suites.
Browse the full range of Drawer Fridges or explore all FED-X refrigeration products on Commercial Kitchen Store.
Installation & delivery: The XCB-72 arrives on heavy-duty lockable castors — no fixed installation required. Ensure a standard 10A/240V single-phase outlet is within reach. Dispatched Australia-wide.
Frequently asked questions
What is the usable (net) capacity of the XCB-72?The net internal capacity is 385 L across four drawers. The gross volume is 450 L.
What refrigerant does the XCB-72 use?The XCB-72 uses R290 (propane), an HFC- and CFC-free natural refrigerant with a low global-warming potential, compliant with Australian environmental standards.
How many drawers does the XCB-72 have?The XCB-72 has four pull-out drawers, each with removable gaskets for easy cleaning. Gastronomy pans (GN-compatible) are sold separately.
What cooking equipment can sit on top of the XCB-72?The unit is specifically designed to support Gasmax cooking equipment on its raised-edge stainless top. Always verify equipment weight against the worktop load rating before mounting.
What power supply does the XCB-72 require?The XCB-72 requires a standard Australian 240V single-phase supply, drawing 660W at 10A. No three-phase supply is needed.
The FED-X XGNS450B is a compact single-door workbench storage fridge designed for under-bench installation in commercial kitchens. Its fan-assisted static cooling system combines even air circulation with the humidity benefits of static cooling, delivering uniform temperature throughout the 90 L net-volume cabinet and fast recovery after door-opening events.
Why operators choose the XGNS450B
Fan-assisted static cooling — uniform temperature, faster recovery after opening, lower frost build-up than fully static units
Stainless steel interior & exterior with rounded corners — durable, hygienic, easy to wipe down at end of service
Digital controls with heavy-duty castors — front-mounted digital thermostat and lockable front-wheel brakes for safe repositioning
Replaceable magnetic door seals — maintain cold-chain integrity; field-replaceable without specialist tools
GN 1/1 compatible shelving — each shelf accepts GN 1/1, 2 x GN 1/2, or 3 x GN 1/3 pans up to 100 mm deep
Specifications
Brand
FED-X
Model / MPN
XGNS450B
Type
Undercounter Storage Fridge
Capacity (Net)
90 L
Capacity (Gross)
109 L
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C, 60% RH
Cooling System
Fan-assisted static
Refrigerant
R600a
Door Count
1
GN Compatibility
GN 1/1 shelf or GN 1/1 drawer (1 x GN 1/1, 2 x GN 1/2, or 3 x GN 1/3, up to 100 mm deep)
Power
240V; 120W/10A
Energy Consumption
1.733 kWh/24h
Construction
Stainless steel interior & exterior, rounded corners, replaceable magnetic door seals
Controls
Digital
Mobility
Heavy-duty castors with front-wheel brakes
Product Dimensions
435(W) x 700(D) x 897(H)mm
Packed Dimensions
730(W) x 465(D) x 1050(H)mm
Net Weight
43 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for cafes, restaurants, pizza bars, sandwich shops, and hospitality venues requiring compact refrigerated storage under a prep bench. The 435 mm width fits into tight underbench runs without sacrificing usable volume. Browse our full range of Under Bench Storage Fridges or explore the complete FED-X catalogue for matching refrigeration and food-prep equipment.
Installation & delivery: No plumbing required — plug into a standard 240V/10A GPO. Position on a level surface and allow adequate rear clearance for condenser airflow. Dispatched Australia-wide.
Frequently asked questions
What is the net storage capacity of the XGNS450B?The XGNS450B has a net volume of 90 L (gross 109 L), sized for compact underbench installation in commercial kitchens.
What temperature range does this fridge maintain?The unit operates between +2°C and +8°C and is rated for ambient environments up to 38°C at 60% relative humidity.
What GN pans does the XGNS450B accept?Each shelf position accepts GN 1/1 (full size), 2 x GN 1/2 (half size), or 3 x GN 1/3 (third size) pans up to 100 mm deep.
What power supply does the XGNS450B require?It runs on a standard 240V/10A single-phase supply (120W draw) — no special wiring required beyond a standard GPO.
What warranty does the XGNS450B carry?The XGNS450B is covered by 2 Years Parts & Labour plus a further 2 Years Parts Only warranty, provided the unit is registered within 14 days of invoice date.
The FED-X XGNS450S is a one-door salad and sandwich prep bar fridge designed for high-volume commercial kitchens that demand consistent cold-chain performance under constant access. Built around a fan-assisted static cooling system, it delivers even temperature distribution with the humidity benefits of static airflow — protecting fresh produce quality and reducing energy waste compared to full frost-free units.
Why operators choose the XGNS450S
Fan-assisted static cooling — uniform temperature recovery after every door open, reduced frost build-up, optimal humidity for fresh produce
109L gross capacity with GN1/1 shelving — accommodates full GN inserts for mise en place and service-line efficiency
Integrated stainless steel cutting board — saves bench space; purpose-built for salad prep workflow (S Series)
Replaceable magnetic door seals — easy field replacement, reduces maintenance downtime
Digital controls & heavy-duty castors — intuitive temperature management with full bench mobility for cleaning and reconfiguration
Specifications
Brand
FED-X
Model / MPN
XGNS450S
Type
Salad / Sandwich Prep Bar Fridge
Gross Capacity
109 L
Net Capacity
90 L
Doors
1 (Hinged)
Shelving
1 x GN1/1 shelf per door
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C at 60% RH
Refrigerant
R600A
Cooling System
Fan-assisted static
Construction
Stainless steel interior & exterior with rounded corners
Cutting Board
Integrated (S Series)
Power
240V, 120W / 10A
Product Dimensions (W x D x H)
435 x 700 x 898mm
Packed Dimensions (W x D x H)
730 x 465 x 1050mm
Net Weight
37 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XGNS450S suits cafes, sandwich bars, salad restaurants, hotel kitchens, and catered venues where fresh ingredients need fast-access refrigeration at the point of preparation. Its compact 435mm footprint makes it ideal for tight prep lines without sacrificing GN-standard storage. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection for complementary refrigeration solutions.
Installation & delivery: The XGNS450S is a plug-in electric unit (240V / 10A) requiring no special installation. Note: GN pans and pan covers must be used to ensure correct operating temperature — pans are not included. Dispatched Australia-wide.
Frequently asked questions
What is the capacity of the XGNS450S?The XGNS450S has a gross volume of 109L and a net volume of 90L, with 1 x GN1/1 shelf per door for organised mise en place storage.
What temperature range does the XGNS450S maintain?It operates between +2 and +8°C, suitable for fresh produce, prepped salads, and sandwich fillings requiring constant cold-chain conditions.
Does the XGNS450S require special installation?No — it is a standard 240V / 10A plug-in unit. Heavy-duty castors allow repositioning without tools. Ensure adequate ventilation clearance around the condenser.
Are GN pans included with the XGNS450S?No. GN pans and pan covers must be sourced separately. Using pans and covers is required to maintain the correct operating temperature inside the unit.
What warranty does the XGNS450S carry?FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only coverage, provided the unit is registered within 14 days of invoice date.
The FED-X XSS7C13S2V-4D is a four-drawer commercial sandwich and salad prep counter refrigerator designed for high-volume prep kitchens. With a 259 L net capacity, raised GN pan rail holding 7×1/3 GN pans, and four heavy-duty pull-out drawers, it keeps ingredients cold and within arm's reach throughout a busy service.
Why operators choose the XSS7C13S2V-4D
Four heavy-duty drawers — smooth-action pull-out drawers replace hinged doors for faster access during service, reducing cold-air loss and improving workflow speed.
7×1/3 GN pan capacity — raised rear rail holds GN pans up to 150mm deep at countertop level, ready for immediate plating without transfer.
Fan-forced Cubigel compressor system — Cubigel compressor with Dixell digital controller maintains +2 to +8°C in ambient conditions up to 43°C — tropicalised for Australian kitchens.
R290 natural refrigerant — environmentally responsible hydrocarbon refrigerant with zero ODP and very low GWP; HFC- and CFC-free 60mm foam insulation throughout.
Display top holds temp up to 4 hours — pre-chilled GN pan zone retains temperature for up to 4 hours, supporting menu prep shifts without power dependency.
Specifications
Brand
FED-X
Model / MPN
XSS7C13S2V-4D
Type
Salad/Sandwich Prep Bar Fridge
Drawers
4
Capacity (Net)
259 L
Capacity (Gross)
282 L
GN Pan Compatibility
7×1/3 GN Pan up to 150mm deep
Temperature Range
+2 to +8°C
Ambient Temperature (Max)
43°C, 60% RH
Cooling System
Fan forced
Compressor
Cubigel
Controller
Dixell digital
Refrigerant
R290
Insulation
60mm HFC- and CFC-free foam
Fans
Ebm-papst evaporator & condenser
Construction
Stainless steel interior & exterior, rounded corners
Power
240V; 50Hz; 10A; 320W
Product Dimensions (W×D×H)
1360 × 700 × 1406mm
Packed Dimensions (W×D×H)
1390 × 730 × 1160mm
Net Weight
104 kg
Mobility
Heavy-duty castors with front wheel brakes
Weight Loading Per Shelf
40 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for pizza and sandwich restaurants, cafes, delis, hotel kitchens, and any operation where speed of ingredient access during service is critical. The four-drawer configuration suits prep lines where staff work along the counter without breaking stride to open full-height doors.
Browse the full Salad Bar Fridges collection or explore all FED-X commercial refrigeration for companion equipment.
Installation & delivery: Arrive fully assembled on castors — roll into position, level, and connect to a standard 10A GPO. No specialist installation required. Dispatched Australia-wide.
Frequently asked questions
Q: What GN pan sizes fit the display rail?A: The XSS7C13S2V-4D accommodates 7×1/3 GN pans up to 150mm deep in the raised countertop rail, making it compatible with standard salad, topping, and ingredient pans used across most commercial kitchens.
Q: Can this unit operate in hot Australian kitchens?A: Yes. The unit is tropicalised for Australian conditions and rated for ambient temperatures up to 43°C at 60% relative humidity, covering the vast majority of Australian commercial kitchen environments.
Q: What refrigerant does the XSS7C13S2V-4D use?A: It uses R290, a natural hydrocarbon refrigerant with zero ozone depletion potential and very low global warming potential — an environmentally responsible choice that also delivers efficient cooling performance.
Q: How long does the display top maintain temperature if power is interrupted?A: When pre-chilled, the display top section can hold its temperature for up to 4 hours, giving operators a buffer during brief power interruptions or at the end of a service shift.
Q: What electrical supply does this unit need?A: The XSS7C13S2V-4D requires a standard 240V/50Hz supply drawing 10A at 320W — a standard 10-amp GPO with no additional electrical work required in most commercial premises.
FED-X Six Drawer Salad Prep Fridge - XGNS1300D-6D This Salad bar fridge prep is the ideal choice for small and medium businesses that need performance, professional-grade commercial refrigeration. With 3 solid Stainless steel doors, it's compact in size so you can make the most of your workspace and kitchen. In addition this unit features a Stainless steel hinged lid on top which opens up to a storage area that holds 8 x 1/6th Gn pans so you have easy access to your ingredients, garnishes, toppings, sauces, and condiments to streamline your food preparation. With its compact size and generous compartments, it is ideal for restaurants, cafes, clubs, pubs, bars, and offices. The heavy duty magnetic door seals are designed to ensure optimal cooling. Constructed using durable and easy-to-clean stainless steel inside and out. The internal area features rounded corners, making it super easy to clean this compact unit. This unit is GN pan compatible, comes with a single shelf but you can opt for additional slides so you Gn pans just slide in and out. This worktop bench fridges’ build quality, specifications and functionality meet food, health, and safety standards. *Unit can be placed against the wall. *Pans are not included. *Pan and pan cover must be used to ensure the correct operating temperature. Net Capacity: 392L
Temperature range: -2 ~ +8°C & Ambient Temperature: 32°C & RH: 60%
Cooling System: Static cooling Compressor: Embraco/Secop Controller: Dixell Weight loading per shelf: 40kg Refrigerant: R290 Dimensions (Internal): 1295mm W x 595mm D x 455mm H MAIN FEATURES Stainless steel interior and exterior with rounded corners for easy cleaning Stainless steel integrated lid Pan and pan cover must be used to ensure correct operating temperature 8 x GN1/6 Pan slots (Pans and lids are not included) GN1/1 shelf per door Replaceable magnetic door seals User friendly Digital controls Heavy duty castors Unit can be placed against the wall 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoiceProduct Dimensions: 1368(W) x 700(D) x 1020(H)mmPower: 240V; 240W/1.6A
Specifications
Capacity: 392L
Width: 1368mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XSS7C18S3V-6D is a 400-litre six-drawer refrigerated sandwich and salad prep fridge designed for high-volume commercial kitchens that need fast, organised cold ingredient access at the point of preparation. Six full-depth drawers replace traditional doors, keeping the prep surface clear while allowing rapid retrieval without a wide door swing in tight kitchen layouts.Why operators choose the XSS7C18S3V-6D
Six heavy-duty drawers — organise ingredients by station; no door swing needed in tight kitchen runs.
8 × 1/3 GN pan capacity up to 150mm deep — accommodates a full sandwich or salad mise-en-place in the raised display top.
+2 to +8°C operating range — holds safe service temperatures in kitchens up to 43°C ambient with 60% RH.
R290 natural refrigerant — low GWP refrigerant, HFC and CFC free 60mm foam insulation throughout the body.
Fan-forced cooling with Cubigel compressor & Dixell digital controller — consistent cabinet temperature with user-friendly digital display and rapid recovery rate.
Stainless steel interior & exterior with rounded corners — easy cleaning, durable finish rated for commercial use.
Heavy-duty castors with front wheel brakes — safe repositioning on the floor, locks securely in service position.
Specifications
Brand
FED-X
Model / MPN
XSS7C18S3V-6D
Type
Refrigerated Sandwich & Salad Prep Fridge
Configuration
6-Drawer
Capacity (Net)
400 L
GN Pan Capacity
8 × 1/3 GN pans up to 150mm deep
Temperature Range
+2 to +8°C
Refrigerant
R290
Compressor
Cubigel
Controller
Dixell digital
Max Ambient Temperature
43°C, 60% RH
Cooling System
Fan forced
Power
240V / 50Hz / 10A / 320W
Power Type
Electric
Construction
Stainless Steel interior & exterior
Insulation
60mm HFC/CFC-free foam body
Product Dimensions (W × D × H)
1795 × 700 × 1406mm
Packed Dimensions (W × D × H)
1830 × 730 × 1160mm
Net Weight
130 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice)
Venue suitability: Suited to sandwich bars, cafés, pizza restaurants, burger kitchens, sushi bars, and fast-food prep lines that require high-volume cold ingredient access at the bench. The drawer configuration is ideal for busy stations where the chef needs rapid access to multiple ingredient sections without a full door open. The 1795mm width accommodates a standard commercial prep bench footprint. Browse the full range in our Salad Bar Fridges collection, or see all equipment from FED-X.Installation & delivery: Plug-in electric connection (240V / 10A standard outlet). Position away from direct heat sources and allow adequate airflow to the condenser. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XSS7C18S3V-6D?The net volume is 400 litres, distributed across six drawers, with the refrigerated display top holding up to 8 × 1/3 GN pans up to 150mm deep.What refrigerant does this unit use?It uses R290, a natural hydrocarbon refrigerant with a very low global warming potential. The body uses 60mm HFC and CFC-free foam insulation.What is the temperature range?The unit operates at +2 to +8°C and is designed for ambient environments up to 43°C at 60% relative humidity — tropicalised for Australian commercial kitchen conditions.What electrical connection is required?The XSS7C18S3V-6D requires a standard 240V / 50Hz / 10A single-phase connection, drawing 320W at full load. No special electrical work is needed for most commercial premises.What is the warranty on this unit?FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only coverage when the product is registered within 14 days of invoice date.
The FED-X XR400SG is a 350L single glass-door upright display fridge designed for commercial operations that need highly visible beverage and chilled product presentation without sacrificing kitchen-grade durability.
Why operators choose the XR400SG
Full-height glass door — maximises product visibility for self-serve beverages, grab-and-go displays, and back-of-house reach-ins.
Static cooling with fan circulation — maintains an even -2 to 8°C across all shelves for consistent chilled product temperatures.
50mm high-density CFC & HCFC-free insulation — energy-efficient construction meets modern refrigerant standards with R600a natural refrigerant.
Commercial-grade stainless steel exterior — rounded internal corners speed up cleaning and meet commercial hygiene requirements.
Digital temperature control & read-out — at-a-glance monitoring with locking door for loss prevention.
Specifications
Brand
FED-X
Model / MPN
XR400SG
Type
Upright Display Fridge
Capacity (Gross)
350 L
Temperature Range
-2 to 8°C
Ambient Temperature (Max)
25°C, 60% RH
Refrigerant
R600a
Doors
1
Door Type
Hinged Glass Door
Cooling System
Static cooling with fan
Insulation
50mm high-density, CFC & HCFC free
Construction
Stainless Steel exterior, rounded internal corners
Controls
Digital temperature control & read-out, locking door
Mobility
Castors on rear, adjustable legs in front
Power
240V, 372W / 10A
Energy Consumption
3.35 kWh/24h
Product Dimensions (W x D x H)
600 x 585 x 1850mm
Packed Dimensions (W x D x H)
646 x 642 x 1990mm
Net Weight
74 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with Product Registration)
Venue suitability: Ideal for cafés, restaurants, convenience stores, hotels, and any commercial venue requiring prominent chilled beverage or food display. The glass-door format suits front-of-house self-serve and back-of-house reach-in applications alike. Browse our full range of Upright Display Fridges or explore more FED-X refrigeration for your commercial kitchen.
Installation & delivery: This freestanding unit requires no fixed plumbing — position on a level surface with rear clearance for ventilation. Plugs into a standard 10A GPO. Dispatched Australia-wide.
Frequently asked questions
What is the operating temperature range of the XR400SG?The FED-X XR400SG operates between -2°C and 8°C, suitable for beverages, dairy, and chilled food display.
What refrigerant does the XR400SG use?It uses R600a (isobutane), a natural, eco-friendly refrigerant with low global warming potential.
Does the XR400SG have a lock on the glass door?Yes — the XR400SG features a locking door for loss prevention and after-hours security.
What power supply does the XR400SG require?The unit runs on a standard 240V / 10A supply (372W). No special electrical work is required — it plugs into a standard GPO.
What warranty does the XR400SG come with?The XR400SG is covered by 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty, provided the unit is registered after purchase — 4 years of total warranty cover.
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Two Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 280L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 119Kg
Dimensions: 1360mmW x 700D x 838H
Power Requirements: 220V 50Hz; 300W; 2.5A
Dimensions: 1360(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Three Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 450L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 120Kg
Dimensions: 1795mmW x 700D x 838H
Power Requirements: 220V 50Hz; 350W; 2.8A
Dimensions: 1795(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 450L
Width: 1795mm
Finish: Stainless Steel
Depth: 700mm
Engineered for optimal refrigeration in even the hottest kitchens, the Atosa Four Door Cooling Table is an ideal solution combining a spacious work surface with refrigerated storage. Built with a stainless steel interior and exterior, this unit is fitted with insulation foam and ensures zero emissions. It is fitted with European-made parts including an Aspera compressor and an EDM fan motor, as well as a Carel or Dixell digital controller. Arrives complete on castor wheels for easy mobility.
Product Features:
Capacity: 560L
Stainless steel interior and exterior
Gas: R134A for Fridges, R404A for Freezers
Insulation Foam: C5H10,ODP, Zero emissions
Working Temp: -2°C to +8°C
43°C ambient working temperature
Good for the hottest kitchen environments
Castors installed as standard
All European parts, Aspera compressor, EBM fan motor
Carel or Dixe/1 digital controller
Net Weight 145Kg
Dimensions: 2230mmW x 700D x 838H
Power Requirements: 220V 50Hz; 350W; 2.8A
Dimensions: 2230(W) x 700(D) x 838(H)mmWarranty: 48 Months Parts & 24 Labour
Specifications
Capacity: 560L
Width: 2230mm
Finish: Stainless Steel
Depth: 700mm
