Commercial drawer fridges for Australian cooklines — underbench refrigerated drawers that hold chilled ingredients at hand height, right where your chefs cook. Instead of crouching into a door cabinet mid-service, staff slide out a gastronorm pan, take what they need and push it shut — no door swing blocking the aisle, no bending between orders. The range runs from single-drawer units up to six-drawer banks, including chef bases built to carry cooking equipment on top. It sits within our wider commercial fridges range, alongside conventional under bench fridges with door access.
Who drawer fridges are for
Drawer refrigeration earns its keep wherever the line is tight and the pace is quick. Restaurants, pubs and burger bars load each drawer with a station's worth of portioned product, so the grill cook never leaves their spot; food trucks and small cafés use them because a drawer opens in a galley aisle where a door physically can't; and busy bars fit underbar drawer units for garnish and stock that needs to stay cold but close. If your team is opening the same underbench door forty times a service, drawers are usually the upgrade that pays for itself in saved seconds.
What's in scope
Underbench drawer fridges
Stainless steel underbench units in one- to six-drawer configurations, sized to slide beneath a standard bench or sit at the heart of the cookline. Digital temperature control, removable drawer inserts for cleaning, and front-breathing refrigeration designed for built-in positions.
Chef base refrigerators
Low-profile drawer units with a reinforced worktop that your cooking equipment sits on — griddle, fryer or benchtop oven above, chilled drawers below. The tightest possible loop between cold storage and the heat. Browse the dedicated chef base refrigerators range for the full line-up.
Drawer freezers
Freezer-temperature drawer variants that hold frozen portions — chips, patties, pastry — at the station instead of across the kitchen in a chest freezer. A common pick as the second unit in a fry-station pair.
Door-and-drawer combination benches
Counter fridges that mix hinged doors with drawer sections in one cabinet, so you get bulk storage and at-hand portions from a single footprint. Popular in kitchens that want one underbench unit to do both jobs.
How to choose a drawer fridge in three steps
Three decisions sort out the right unit, in order.
Step 1 — Match the unit to the station
Decide what sits above the refrigeration. If cooking equipment goes on top, you need a chef base with a load-rated worktop; if it slips under an existing bench, a standard underbench drawer unit is the fit; and if you're prepping rather than cooking above it, look at countertop prep fridges with pan wells up top instead.
Step 2 — Count drawers and pan capacity
Work out how many stations the unit feeds and how much each holds per drawer — most commercial units are built around gastronorm pans, so check the GN capacity and pan depth on the spec sheet. Configurations run from one to six drawers; more drawers means more separation between products, which keeps allergen and raw-protein handling cleaner.
Step 3 — Confirm temperature, footprint and power
Choose fridge, freezer or a combination cabinet based on what the station actually uses. Then measure the gap — width, depth and height including castors — check the climate rating suits a hot Australian kitchen, and confirm the unit runs from a standard 10-amp outlet, which most underbench drawer units do.
Quick-service and burger kitchens run a chef base under the griddle; restaurants put a multi-drawer bank at the sauté and grill stations; bars choose underbar drawer cabinets to keep the back bar clear — see our commercial bar fridges if drinks storage is the bigger job. Smaller venues often start with a two-drawer unit at the busiest station and add from there.
Frequently asked questions
What is a commercial drawer fridge?
A commercial drawer fridge is an underbench refrigeration unit that uses pull-out drawers instead of hinged doors, holding chilled ingredients — usually in gastronorm pans — at hand height on the cookline. Units range from single-drawer cabinets to six-drawer banks, built in stainless steel for professional kitchen use.
Are drawer fridges better than door fridges?
On a busy cookline, usually yes: a drawer opens without a door swinging into the aisle, staff see the contents from above without bending, and only one pan's worth of cold air is exposed at a time. Door-style underbench cabinets still win for bulk storage, since they cost less per litre. Many kitchens run both — doors for backup stock, drawers at the stations.
What is a chef base refrigerator?
A chef base is a low, reinforced drawer fridge designed to carry cooking equipment on its worktop — a griddle, fryer or benchtop oven sits on top while refrigerated drawers below hold the ingredients for that station. It compresses cold storage and the cooking surface into a single footprint, which is why fast-paced grill lines rely on them.
Can I get drawer freezers in Australia?
Yes — drawer freezer variants are sold alongside drawer fridges and hold frozen product at the station, so fry cooks aren't walking to a chest freezer mid-service. Some combination cabinets pair fridge and freezer drawers in one unit; check the temperature range on each product page to confirm which you're buying.
Do drawer fridges take gastronorm pans?
Most commercial drawer fridges are sized around standard gastronorm pans, with each drawer typically taking GN 1/1 pans or fractional combinations. Pan depth matters as much as footprint — a shallow 150mm-deep drawer suits garnish and portions, while deeper drawers take bulkier product — so confirm the GN capacity on the spec sheet before you order.
Do you deliver drawer fridges across Australia?
Yes. Commercial Kitchen Store ships nationwide, and Australian-based phone support is available on 1300 111 901 if you need help matching a drawer unit to your cookline. Every product page carries verified customer reviews, so you can see how each unit has performed in other Australian kitchens.
The FED-X XUB7C18S3D is a six-drawer underbench refrigerator designed for high-volume commercial kitchens that need fast, ergonomic access to cold ingredients at the workstation. The stainless steel worktop doubles as a preparation surface, making it a compact, multi-purpose addition to any cookline or prep area.
Why operators choose the XUB7C18S3D
Six GN1/2 drawer pairs — two heavy-duty drawers per section let staff grab ingredients without opening a full door, reducing cold-air loss during service.
Fan-forced Embraco/Secop compressor — maintains a consistent -2 to +8°C operating range even in ambient temperatures up to 43°C, tropicalised for Australian conditions.
R290 natural refrigerant — low global warming potential compliant with current AU environmental standards; HFC- and CFC-free 60 mm foam body insulation.
Dixell digital controller — user-friendly display with rapid recovery rate and Ebm-papst evaporator and condenser fans for reliable temperature control.
Full stainless interior & exterior with rounded corners — simplifies cleaning and meets commercial kitchen hygiene requirements; heavy-duty castors with front-wheel brakes allow repositioning and wall-flush placement.
Specifications
Brand
FED-X
Model / MPN
XUB7C18S3D
Type
Drawer Fridge
Capacity
311 L
Drawer Count
6 (two GN1/2 drawers per section)
Temperature Range
-2 to +8°C
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Embraco/Secop
Controller
Dixell
Ambient Temperature
43°C
Power
240V; 230W / 1.3A
Power Type
Electric
Material
Stainless Steel
Product Dimensions
1795(W) x 700(D) x 850(H) mm
Internal Dimensions
1234 x 580 x 564mm
Package Dimensions
1825(W) x 730(D) x 910(H) mm
Net Weight
121 kg
Body Insulation
60 mm HFC- and CFC-free foam
Country of Manufacture
China
Warranty
24 months parts & labour + 24 months parts only (with product registration within 14 days of invoice)
Venue suitability: Ideal for commercial kitchens in restaurants, hotels, cafes, catering operations, and food-service venues where underbench refrigerated storage at the cookline or prep bench is needed. The wall-flush design and locking castors suit tight kitchen layouts.
Explore the full Drawer Fridge range or browse all FED-X refrigeration equipment.
Installation & delivery: The XUB7C18S3D ships on its own heavy-duty castors and requires a standard 240V / 10A power outlet. Allow adequate rear ventilation clearance per the manufacturer specification sheet. Dispatched Australia-wide.
Frequently asked questions
What is the operating temperature range of the XUB7C18S3D?The unit maintains a temperature range of -2 to +8°C, making it suitable for chilled ingredient storage in busy service environments.
What refrigerant does the XUB7C18S3D use?It uses R290, a natural refrigerant with a low global warming potential. The unit contains no HFCs or CFCs and uses 60 mm foam body insulation.
How many drawers does the XUB7C18S3D have and what GN size do they accept?The unit has six GN1/2 drawers (two per section across three sections), allowing organised storage of standard gastronorm pans directly at the workstation.
Can the unit be placed flush against a wall?Yes — the XUB7C18S3D is designed so the condenser is positioned to allow wall-flush placement. Heavy-duty front-wheel-brake castors also allow it to be locked in position.
What is the warranty on the XUB7C18S3D?FED-X provides 2 years parts and labour plus a further 2 years parts only, provided the unit is registered within 14 days of the invoice date.
The FED-X XUB7C13S2D is a four-drawer underbench refrigerator designed to maximise cold storage in tight prep-line footprints. Housing four heavy-duty GN1/2 drawer compartments across two columns, it keeps ingredients chilled between -2°C and +8°C with a fan-force evaporator system and Dixell digital controller — all within a 1360mm-wide stainless steel worktop chassis.
Why operators choose the XUB7C13S2D
Four GN1/2 drawers — two columns of two drawers provide fast-access ingredient storage without opening a full-size door, reducing cold-air loss during busy service.
Worktop-height chassis — 850mm height with a flat stainless top doubles as a prep surface and integrates flush with standard bench runs.
Embraco/Secop compressor with Dixell control — proven commercial refrigeration drive train with digital temperature management and rapid recovery after frequent drawer access.
R290 natural refrigerant — low global-warming-potential refrigerant suitable for Australian regulatory requirements; CFC & HFC free.
Heavy-duty castors with front-wheel brakes — mobile for cleaning; locks in place during service; rear can be positioned flush to the wall.
60mm high-density foam insulation — CFC-free body insulation supports consistent -2 to +8°C operation in ambient temperatures up to 43°C.
Specifications
Brand
FED-X
Model / MPN
XUB7C13S2D
Type
Underbench Drawer Fridge
Capacity (Net)
186 L
Drawer Count
4 (2 columns × 2 rows, GN1/2)
Temperature Range
-2 to +8°C
Refrigerant
R290
Cooling System
Fan-force evaporator cooling
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V; 215W / 1.3A
Power Type
Electric
External Dimensions (W × D × H)
1360 × 700 × 850mm
Internal Dimensions (W × D × H)
799 × 580 × 564mm
Net Weight
102 kg
Insulation
60mm CFC & HFC-free foam body
Max Ambient Temperature
43°C / 60% RH
Construction
Stainless Steel interior & exterior, rounded corners
Castors
Heavy-duty with front-wheel brakes
Country of Manufacture
China
Warranty
24 months parts & labour + 24 months parts only (register within 14 days)
Venue suitability: The XUB7C13S2D suits commercial prep kitchens, sandwich bars, pizza stations, hotel kitchens, and any operation needing under-counter refrigeration with rapid-access drawer storage. The 1360mm-wide worktop integrates into standard bench-height cook lines and prep runs.
Explore the full Drawer Fridge range or browse all FED-X commercial refrigeration to find the configuration that suits your kitchen layout.
Installation & delivery: The XUB7C13S2D ships on heavy-duty castors and requires a standard 240V / 10A outlet — no hard-wiring needed. Allow 100mm clearance at the rear and sides for ventilation. Dispatched Australia-wide.
Frequently asked questions
What is the capacity of the XUB7C13S2D?The net usable capacity is 186 litres across four GN1/2 drawers. The gross volume (including insulation void) is 282 litres.
What refrigerant does the XUB7C13S2D use?It uses R290 (propane), a natural refrigerant with a very low global-warming potential. R290 is CFC and HFC free and compliant with current Australian refrigeration regulations.
What drawer size do the drawers accept?Each drawer accepts GN1/2 gastronorm pans. There are two drawer compartments per column, giving four drawers in total across the two-column chassis.
What is the maximum ambient temperature the XUB7C13S2D can operate in?The unit is rated to operate in ambient conditions up to 43°C at 60% relative humidity, making it suitable for hot commercial kitchen environments.
What warranty does the FED-X XUB7C13S2D carry?It includes 2 years parts & labour plus an additional 2 years parts-only coverage when you register the product within 14 days of invoice. See our warranty information page for full details.
Looking for a fridge that maximises kitchen space? Then the Polar U-series 2 door and 2 drawer counter fridge will be the product for you. The insulation keeps the cold in so your food can be kept at the optimum temperature.Also, the adjustable shelves help to store chilled foods of all shapes and sizes, so large food quantities can be stored within easy reach.With self-closing doors, this fridge can remain energy efficient while helping chefs when they have their hands full.And the gastronorm compatibility allows most-used ingredients to be placed for easy reach so chefs can prep prior to cooking.The user-friendly temperature controls and display make it easily to change the temperature dependant on what's being stored, so food can remain fresher for longer.With an automatic defrost option this fridge has maximum efficiency and performance to help food remain at the optimum temperature, and the fan-assisted cooling system ensure rapid temperature recovery further helping to keep the ingredients at the optimum temperature. No technician is required to set up this machine, allowing you to use it almost instantly from delivery. This item should not be used for medical storage. Please refer to our catalogue for medical fridge/freezers. Product features Capacity 417Ltr Dimensions 860(H) x 1795(W) x 700(D)mm Dimensions - internal 560(H) x 1234(W) x 580(D)mm Dimensions - insulation 50mm Material Stainless Steel Output 350W. 1.95A Refrigerant R600a Temperature Range -2°C to 5°C Voltage 230V Warranty 2 Years Weight 144kg Depth of shelf/drawer (GN sizing): 530 / 540 Total Usable Capacity (Litres) of unit: 242 Gems Rating: 6 Noise Level (Decibles): 46.5 Solid self-closing doors ensures they aren't left open by mistake Auto defrost function to help with maintenance and long-lasting reliability Sturdy lockable castor wheels for easy positioning wherever you need it User-friendly digital temperature controls and display for easy operation Plug Type: 1x 10amp Plug Weight Capacity of Shelf/Drawer: 13/69 Not suitable for use in outdoor & mobile environments including catering vehicles.
WORRY-FREE FRESH KEEPING Providing more options for customer, Hoshizaki’s refrigerator and freezers configured as drawers enable quicker access to regularly used items with each dedicated drawer. Suitable for kitchens that replenishes its produce often, its low height also maximizes space and each item come in either 4 or 6 drawers.
Stainless steel interior and exterior. Programmable Digital controller and display. 6 x Auto closing drawers. Fits GN pans 150mm Deep. Compact slide out refrigeration unit for quick maintenance. 2 years parts and labour warranty. Comes standard with 115mm lockable castors (not legs). Optional Adjustable legs 150 – 180mm (Sold separately). Exterior Stainless Steel, Galvanized Steel (Rear /Bottom) Interior Stainless Steel, ABS Plastic Max Storage Capacity 404L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Drain Evaporator Pan Fin & Tube type Outside Dimensions 1670mm (W) x 700mm (D) x 815mm (H) Inside Dimensions 1300mm (W) x 533mm (D) x 588mm (H) Refrigeration System Forced Air Circulation Weight (kg) 135 AC Supply Voltage 1 PHASE 220-240V 50Hz/10Amp Plug Amperage Rated: 2.2A Refrigerant R134a / 150g Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Product Dimensions: 1670(W) x 700(D) x 815(H)mm
Specifications
Capacity: 404L
Width: 1670mm
Finish: Stainless Steel
Depth: 700mm
The Skipio SUR18-3D-9 Nine Drawer Underbench Fridge offers a reliable and space-saving solution for commercial kitchen refrigeration needs. With a generous capacity of 505 liters spread across three spacious drawers, this freezer provides ample storage space for a wide range of perishable items, ingredients, and pre-prepared dishes. Its innovative drawer design allows for efficient organization and easy access to stored items, facilitating smooth kitchen operations and workflow.
Engineered with durability and performance in mind, the Skipio SUR18-3D-9 is constructed using high-quality materials and components to withstand the demands of busy commercial kitchens. The unit features polyurethane and cyclopentane insulation, coupled with CFC-free refrigerant R-134a, ensuring optimal cooling performance while promoting energy efficiency and environmental sustainability. With its wide cabinet dimensions of 1800mm width, 700mm depth, and 855mm height, this underbench fridge maximizes storage capacity without compromising on space, making it an ideal choice for restaurants, cafes, and other foodservice establishments seeking dependable refrigeration solutions.
Specifications:
Classification
Refrigerator
Cabinet dimension
W1800 * D700 * H855 (mm)
Capacity
505ℓ
Inner Temperature
0~8℃
Refrigerant
R-134a
Insulation Type
Polyurethane / Cyclopentane + CFC Free
Power
366W
Voltage
240V / 50Hz / 1Ph
Weight
144Kg
332L Capacity
Embedded controller
Heavy duty stainless steel interior and exterior 304
Designed with height suitable for placing cooking equipment on
Anticorrosive protection on the evaporators
Automatic defrost
Supplied with telescopic guides on all drawers
0°C to +10°C
Ambient 43°C
Suitable for 100mm deep 1/1 GN pans
571L Capacity
European design and manufacture
On castors (Note: Supplied on castors, image shown on legs)
Digital controller
Ambient temperature of 43˚C
Stainless steel interior/exterior
Internal corners rounded for ease of cleaning
Fits gastronorm trays in drawers and door up to 150mm deep
421L Capacity
European design and manufacture
On castors (Note: Supplied on castors, image shown on legs)
Digital controller
Ambient temperature of 43˚C
Stainless steel interior/exterior
Internal corners rounded for ease of cleaning
Fits gastronorm trays in drawers and door up to 150mm deep
With three doors and a large 1.8 metre stainless steel worktop, the Polar U-Series heavy duty counter fridge offers all the capacity and capability you need in your professional kitchen. Digital controls make operation simple, whilst the full size (1/1) gastronorm compatible interior allows rapid access to pans.Lockable castors ensure stability and allow easy positioning for cleaning when required. The fridge is also both effective and efficient, keeping running costs down even when kitchen temperatures reach up to 43°C. Great for when a service heats up.Polar U-Series is the pinnacle of the Polar kitchen refrigeration range, designed to reliably store your most valuable produce. Built to the highest commercial specifications, these units feature powerful forced air cooling - perfect for reducing food waste whilst conserving food taste. If you expect to access the unit very frequently, Polar U-Series refrigeration reliably keeps a consistently cool temperature, even in conditions up to 43°C. Suitable for perishable & non-perishable food items.
Product features
Dimensions860(H) x 1795(W)mm
MaterialStainless Steel
Weight134kg
Sturdy lockable castors allow easy positioning
Easy manual defrost
Fan assisted cooling ensures rapid temperature recovery
1/1 GN compatible interior for rapid filling and access
3 sturdy adjustable shelves to maximise capacity
Net Usable Capacity: 358 Ltr
Ambient temperature range: 5°C to 43°C
Time-saving easy-clean construction
Accurate, user-friendly digital temperature controls and display
Solid self-closing doors reduce temperature loss
Specifications
Capacity: 417L
Width: 1795mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XUB7C22S4D is an underbench drawer refrigerator that delivers 553L of gross refrigerated storage across eight GN1/2 drawers, built for high-throughput commercial kitchens where bench space doubles as prep surface and front-access refrigeration keeps mise-en-place within arm's reach.
Why operators choose the XUB7C22S4D
8 GN1/2 drawers in 4 columns — two heavy-duty drawers per section organise ingredients by station without opening a full door
Fan-forced cooling with Embraco/Secop compressor — rapid temperature recovery after heavy use; holds -2 to +8°C even at 43°C ambient
Dixell digital controller — precise temperature management and at-a-glance status on the display panel
R290 natural refrigerant — low-GWP, HFC/CFC-free; 60mm foam-insulated body minimises energy draw
Stainless steel interior & exterior with rounded corners — easy cleaning, no crevices for food debris
Tropicalised for Australian conditions — rated to 43°C ambient with Ebm-papst evaporator and condenser fans for sustained performance in hot kitchens
Stainless worktop with heavy-duty castors — prep surface ready to use; front-wheel brake castors can be pushed flush against the wall
Specifications
Brand
FED-X
Model / MPN
XUB7C22S4D
Type
Drawer Fridge
Gross Volume
553 L
Drawers
8 (2 per column, 4 columns)
Drawer Size
GN 1/2
Temperature Range
-2 to +8°C
Max Ambient Temperature
43°C, 60% RH
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Embraco / Secop
Controller
Dixell
Power
240V; 345W / 2.0A
Construction
Stainless steel interior & exterior, rounded corners; 60mm HFC/CFC-free foam insulation
Dimensions (W x D x H)
2230 x 700 x 850mm
Internal Dimensions (W x D x H)
1669 x 580 x 564mm
Packing Dimensions (W x D x H)
2260 x 730 x 910mm
Net Weight
150 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Designed for commercial kitchens requiring high-volume front-access refrigeration under the prep line. Ideal for busy restaurants, hotels, catering operations, and production kitchens where GN1/2 drawer organisation by station speeds service. The 2230mm wide unit suits long cook lines or garde manger sections. Browse the full range of Drawer Fridges or explore all FED-X commercial refrigeration.
Installation & delivery: Unit arrives on heavy-duty castors ready for positioning — no fixed installation required. Allow clearance for the right-side condenser air flow. Connect to a standard 240V / 10A power outlet. Dispatched Australia-wide.
Frequently asked questions
What is the internal capacity of the XUB7C22S4D?The supplier-stated gross volume is 553L across all eight drawers. The drawers are sized to GN 1/2 gastronorm, suitable for standard prep containers and ingredient pans.
What temperature range does this drawer fridge operate at?The XUB7C22S4D maintains -2 to +8°C, making it suitable for refrigerating proteins, dairy, and fresh produce under the prep line.
Is this unit suitable for hot kitchen environments?Yes — it is tropicalised for Australian conditions and rated to operate at up to 43°C ambient temperature with 60% relative humidity, well within a typical commercial kitchen environment.
What refrigerant does the XUB7C22S4D use?It uses R290 (propane), a natural refrigerant with very low global warming potential (GWP). The foam insulation is also HFC and CFC free.
What warranty is included?FED-X provides 2 Years Parts & Labour plus a further 2 Years Parts Only, subject to product registration within 14 days of invoice via the FED product registration portal.
The FED-X XCB-36 is a refrigerated chef base drawer bench that positions cold ingredient storage directly beneath your Gaxmax or compatible cooking equipment, keeping mise en place within arm's reach at pass temperature while freeing up conventional fridge space. With a 184-litre gross capacity across two full-width drawers, it is designed to sit beneath a countertop cooking suite and double as a heavy-duty worktable surface.
Why operators choose the XCB-36
Two full-width refrigerated drawers — keep prepped ingredients cold at the cookline without breaking stride; each drawer runs on Austrian Fulterer runners for smooth, reliable operation
Raised-edge stainless worktop — the flat top doubles as a prep and plating surface directly above the cooking suite, maximising tight kitchen footprints
HFC/CFC-free R290 refrigerant — environmentally compliant refrigerant with fan-forced evaporator cooling for rapid temperature recovery after each drawer open
Tropicalised for Australian conditions — rated to 32°C ambient / 65% RH, purpose-built for hot commercial kitchen environments
Heavy-duty mobility — four castors with front-wheel brakes allow repositioning for cleaning and maintenance without disconnecting the unit
Specifications
Brand
FED-X
Model / MPN
XCB-36
Type
Refrigerated Chef Base / Drawer Fridge
Capacity (Gross)
184 L
Capacity (Net)
162 L
Drawers
2
Temperature Range
-1 to +5°C
Ambient Temperature Rating
32°C / 65% RH
Refrigerant
R290
Power
240V, 396W, 10A
Energy Consumption
3.241 kWh/24h
Construction
Stainless steel interior & exterior, rounded corners
Insulation
60mm HFC/CFC-free foam body insulation
Cooling
Fan-forced evaporator
Controls
User-friendly digital controls
Door Runners
Austrian Fulterer runners
Gaskets
Removable magnetic drawer gaskets
Pan Compatibility
GN pan, 100mm height (sold separately)
Product Dimensions (W x D x H)
924 x 816 x 658mm
Internal Depth
530mm
Packed Dimensions (W x D x H)
886 x 990 x 724mm
Net Weight
85 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XCB-36 suits high-volume kitchens where cookline efficiency is paramount — hotel restaurants, high-turnover cafes, contract catering operations, and food manufacturing with a hot-side cooking suite. Its compact 658mm height places the worktop at a practical pass height beneath countertop cooking equipment. It is tropicalised for the demands of Australian commercial kitchen environments, including high-ambient temperature and humidity conditions.
Explore our full range of Drawer Fridges and the complete FED-X commercial refrigeration lineup.
Installation & delivery: The XCB-36 arrives fully assembled on heavy-duty castors — connect to a standard 240V/10A GPO and it is ready to operate. Ensure a minimum 100mm rear clearance for compressor ventilation. Dispatched Australia-wide.
Frequently asked questions
What GN pan size fits the XCB-36 drawers?Each drawer is compatible with gastronomy pans (GN pans) up to 100mm in height. GN pans are sold separately. The unit requires a GN pan to use the storage function effectively.
Can the XCB-36 support countertop cooking equipment on top?Yes — the raised-edge stainless steel worktop is designed to support compatible countertop cooking equipment, and the unit is purpose-built to serve as a refrigerated base beneath Gaxmax and similar cooking suites. Check the weight rating of your specific cooking equipment against the worktop load specification.
What is the warranty on the XCB-36?The XCB-36 carries a 2-Year Parts & Labour warranty plus an additional 2-Year Parts-Only warranty — 4 years total — when the product is registered within 14 days of invoice date.
Is the XCB-36 suited to hot or humid kitchen environments?Yes — the unit is tropicalised for Australian commercial kitchen conditions and is rated to operate at up to 32°C ambient temperature and 65% relative humidity.
What refrigerant does the XCB-36 use?The XCB-36 uses R290 (propane), an HFC/CFC-free natural hydrocarbon refrigerant. R290 has a very low global warming potential (GWP) and is fully compliant with current Australian environmental standards.
The FED-X XCB-48 is a refrigerated chef base drawer fridge designed to sit beneath commercial cooking equipment and keep cold ingredients at the cook's fingertips. With 263 litres of refrigerated capacity across two full-width drawers, it maintains a consistent -1 to +5°C working temperature and is tropicalised for Australian kitchen conditions.Why operators choose the XCB-48
2-drawer cold storage below the cookline — each drawer holds GN pans (sold separately), keeping prep ingredients within arm's reach of the chef without leaving the station.
Tropicalised for AU conditions — rated to 32°C ambient at 65% RH, so it performs in hot, high-humidity commercial kitchens without hunting or cycling off.
Fan-forced evaporator cooling — rapid recovery rate after door openings keeps product temperature stable during service.
Austrian Fulterer drawer runners — heavy-duty, smooth-glide runners built for repeated daily use; removable drawer gaskets simplify cleaning and maintenance.
Stainless steel interior & exterior with rounded corners — hygienic, wipe-clean surfaces throughout; 60mm HFC/CFC-free foam insulation in the body.
Specifications
Brand
FED-X
Model / MPN
XCB-48
Type
Refrigerated Chef Base / Drawer Fridge
Capacity
263 L
Drawers
2
Door Type
Hinged Doors
Temperature Range
-1 to +5°C
Max Ambient Temperature
32°C / 65% RH
Refrigerant
R290
Power
240V / 396W / 10A
Energy Consumption
3.679 kWh/24h
Body Material
Stainless Steel
Insulation
60mm HFC/CFC-free foam
Width
1228mm
Depth
816mm
Height
655mm
Package Dimensions
1294(W) x 886(D) x 725(H)mm
Net Weight
92 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (48 months total — register within 14 days of invoice)
Venue suitability: Ideal for high-volume commercial kitchens, hotel cooklines, catering operations, and food service venues where maximising worktop space while keeping cold ingredients immediately accessible is a priority. The low-profile design supports standard and heavy-duty cooking equipment placed on top (worktop-load rating per equipment spec). Browse our full range of Drawer Fridges or explore the complete FED-X range.Installation & delivery: Fitted with heavy-duty castors (front-wheel brakes) for easy repositioning. Requires a standard 240V / 10A single-phase power outlet. No gas or plumbing connections required. Dispatched Australia-wide.Frequently asked questionsWhat is the capacity of the XCB-48?The XCB-48 has a gross volume of 263 litres across its two drawers.What refrigerant does the XCB-48 use?The XCB-48 uses R290 (propane), a natural refrigerant with low global warming potential, compliant with Australian commercial kitchen requirements.What temperature range does the XCB-48 maintain?The unit operates between -1°C and +5°C, suitable for storing perishable ingredients at safe food-service temperatures.Are GN pans included with the XCB-48?No — gastronomy pans (GN pans) are sold separately. The drawers are compatible with various GN pan configurations.What is the warranty on the XCB-48?The XCB-48 carries a 2-year parts and labour warranty plus an additional 2 years parts-only warranty (48 months total) when the product is registered within 14 days of the invoice date.
The FED-X XCB-60 is a refrigerated chef base drawer fridge designed to slide under cooking equipment and deliver cold ingredient storage exactly where it is needed at the pass. With a 360L gross capacity and two full-width drawers, it keeps prep within arm's reach of the cook without sacrificing worktop or floor space.
Why operators choose the XCB-60
360L gross capacity across 2 drawers — holds full GN pans at operating height, keeping cold mise en place at the line
-1 to +5°C temperature range — maintains safe chill throughout a busy service without manual adjustment
Fan-forced evaporator cooling with rapid recovery — temperature rebounds quickly after each drawer open
Austrian Fulterer drawer runners — heavy-duty smooth glide rated for continuous commercial use
Stainless steel interior and exterior with rounded corners — fast clean-down between services, no rust risk
Tropicalised for Australian conditions — performs at up to 32°C ambient/65%RH without performance loss
Raised edge top & removable magnetic drawer gaskets — gaskets pull off for deep cleaning; raised edge catches spills from equipment above
Specifications
Brand
FED-X
Model / MPN
XCB-60
Type
Refrigerated Chef Base / Drawer Fridge
Capacity (Gross)
360 L
Capacity (Net)
310 L
Drawers
2
Door Type
Hinged Drawers
Temperature Range
-1 to +5°C
Ambient Temperature (Max)
32°C, 65% RH
Refrigerant
R290-A
Power
240V, 500W, 10A
Total Energy Consumption
4.596 kWh/24h
Construction
Stainless Steel interior & exterior
Insulation
60mm HFC & CFC-free foam
Cooling
Fan-forced evaporator
Mobility
Heavy-duty castors with front-wheel brakes
Pan Height (Drawer)
100mm
Product Dimensions (W x D x H)
1524 x 816 x 658mm
Packed Dimensions (W x D x H)
1590 x 886 x 725mm
Net Weight
105 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Designed for professional kitchen lines where cooking equipment needs refrigerated ingredient storage underneath — suits restaurants, hotels, catering operations, and any high-volume kitchen running a dedicated pass or cook station. Compatible with gastronomy pans (GN pans sold separately). Explore the full range of Drawer Fridges or shop all FED-X refrigeration.
Installation & delivery: Requires a standard 240V/10A power outlet. Allow adequate clearance at the rear for ventilation. Heavy-duty castors allow repositioning on site. Dispatched Australia-wide.
Frequently asked questions
What is a chef base refrigerator?A chef base (also called a refrigerated equipment stand) is a low-profile refrigerated unit designed to sit on the kitchen floor and support cooking equipment on its worktop while storing cold ingredients in drawers at the operator's side — eliminating the need for a separate undercounter fridge at the line.
What pan size fits in the XCB-60 drawers?Each drawer is designed for gastronomy (GN) pans at 100mm pan height. GN pans are sold separately. The raised-edge top also catches spillage from equipment above.
What is the temperature range of the XCB-60?The XCB-60 operates between -1°C and +5°C, keeping chilled ingredients well within the safe food-storage zone during full service.
Is the XCB-60 suitable for hot Australian kitchens?Yes — the unit is tropicalised for Australian conditions and rated for ambient temperatures up to 32°C at 65% relative humidity without performance loss.
What warranty does the XCB-60 come with?The XCB-60 carries a 2-year parts & labour warranty plus an additional 2-year parts-only warranty (4 years total) when the product is registered with FED-X within 14 days of the invoice date.
The FED-X XCB-72 is a refrigerated chef base drawer bench that sits beneath cooking equipment to keep cold ingredients within arm's reach of the cook line. The 1838 mm wide, 450 L unit holds four pull-out drawers cooled to -1–+5°C, eliminating walk-in trips during service.
Why operators choose the XCB-72
4-drawer access — four full-width pull-out drawers put pans of prepped ingredients directly under cooktop equipment, cutting service steps.
Tropicalised for AU conditions — rated to 32°C ambient / 65% RH, engineered for commercial kitchen heat loads common in Australian venues.
Fan-forced R290 refrigerant — HFC & CFC-free R290 refrigerant with fan-forced evaporator delivers rapid temperature recovery after drawer opening.
Heavy-gauge stainless construction — stainless steel interior and exterior with rounded corners; removable drawer gaskets for easy cleaning.
Integrated worktop support — raised-edge stainless top with sufficient load rating to mount Gasmax or equivalent cooking equipment directly above.
Specifications
Brand
FED-X
Model / MPN
XCB-72
Type
Drawer Fridge / Refrigerated Chef Base
Capacity (Gross)
450 L
Capacity (Net)
385 L
Drawers
4
Temperature Range
-1 to +5°C
Refrigerant
R290
Max Ambient Temperature
32°C / 65% RH
Power
240V, 660W, 10A
Energy Consumption
5.132 kWh/24h
Construction
Stainless Steel (interior & exterior)
Product Dimensions (W×D×H)
1838 × 816 × 658 mm
Packed Dimensions (W×D×H)
1908 × 886 × 725 mm
Net Weight
125 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for high-volume restaurants, hotels, catering operations, and any cook line where drawer-access refrigeration below cooking equipment reduces service steps. The 1838 mm width suits full commercial cook suites.
Browse the full range of Drawer Fridges or explore all FED-X refrigeration products on Commercial Kitchen Store.
Installation & delivery: The XCB-72 arrives on heavy-duty lockable castors — no fixed installation required. Ensure a standard 10A/240V single-phase outlet is within reach. Dispatched Australia-wide.
Frequently asked questions
What is the usable (net) capacity of the XCB-72?The net internal capacity is 385 L across four drawers. The gross volume is 450 L.
What refrigerant does the XCB-72 use?The XCB-72 uses R290 (propane), an HFC- and CFC-free natural refrigerant with a low global-warming potential, compliant with Australian environmental standards.
How many drawers does the XCB-72 have?The XCB-72 has four pull-out drawers, each with removable gaskets for easy cleaning. Gastronomy pans (GN-compatible) are sold separately.
What cooking equipment can sit on top of the XCB-72?The unit is specifically designed to support Gasmax cooking equipment on its raised-edge stainless top. Always verify equipment weight against the worktop load rating before mounting.
What power supply does the XCB-72 require?The XCB-72 requires a standard Australian 240V single-phase supply, drawing 660W at 10A. No three-phase supply is needed.
Create an organised and robust work station with the Atosa 2 Drawer Chef Base. Combining refrigerated storage and a sturdy work surface for countertop equipment, this unit is a heavy duty addition to any commercial kitchen. The interior and exterior is built from hard-wearing, corrosion-resistant stainless steel, and well as its 2 drawer, slides, and rollers. The drawers are gravity-fed and self-closing, and feature recessed handles. The magnetic door gasket is removable for easy cleaning and maintenance.
Product Features:
Capacity: 260L
Low base chef's table
Constructed in Stainless steel
43°C ambient working temp
2°C - 8°C working temp
Italian digital control
Embracco compressor
Automatic defrost
Self-evaporating drainage
Heavy duty stainless steel drawer slides and rollers
Drawers come off easily for cleaning
Magnetic drawer gasket is removable for easy cleaning and maintenance
Recessed door handle
Pre-installed heavy-duty castors with brakes.
Designed with corrosion-resistant stainless steel of the highest quality
Cabinet top is one-piece, heavy duty reinforced stainless steel to support countertop equipment
Gravity fed self-closing drawers
Net Weight 95Kg
Dimensions: 1230mmW x 815D x 520H
Power Requirements: 240V 50Hz; 260W
Dimensions: 1230(W) x 815(D) x 676(H)mmWarranty: 48 Months Parts & 24 Labour
Create an organised and robust work station with the Atosa 4 Drawer Chef Base. Combining refrigerated storage and a sturdy work surface for countertop equipment, this unit is a heavy duty addition to any commercial kitchen. The interior and exterior is built from hard-wearing, corrosion-resistant stainless steel, and well as its 4 drawer, slides, and rollers. The drawers are gravity-fed and self-closing, and feature recessed handles. The magnetic door gasket is removable for easy cleaning and maintenance.
Product Features:
Capacity: 420L
Low base chef's table
Constructed in Stainless steel
43°C ambient working temp
2°C - 8°C working temp
Italian digital control
Embracco compressor
Automatic defrost
Self-evaporating drainage
Heavy duty stainless steel drawer slides and rollers
Drawers come off easily for cleaning
Magnetic drawer gasket is removable for easy cleaning and maintenance
Recessed door handle
Pre-installed heavy-duty castors with brakes.
Designed with corrosion-resistant stainless steel of the highest quality
Cabinet top is one-piece, heavy duty reinforced stainless steel to support countertop equipment
Gravity fed self-closing drawers
Net Weight 120Kg
Dimensions: 1840mmW x 815D x 520H
Power Requirements: 240V 50Hz; 390W
Dimensions: 1840(W) x 815(D) x 676(H)mmWarranty: 48 Months Parts & 24 Labour
The Thermaster CBR1-3 is a 1-drawer FlexDrawer counter refrigerator and freezer that sits beneath a cooking line or prep bench, delivering refrigerated ingredient access at worktop level without the footprint of a full-size fridge.
Why operators choose the CBR1-3
Dual temperature mode — switch the drawer between fridge (+2 to +8°C) and freezer (-22 to -18°C) at the touch of a button, adapting to your service needs without a second unit.
116L gross capacity with 3 x GN 1/1 pan slots — full GN 1/1 150mm deep pan compatibility keeps prep ingredients organised and ready at the pass.
R290 natural refrigerant — low global warming potential, energy-efficient, and CFC-free for compliance-forward kitchens.
Automatic hot gas defrost — energy-saving defrost cycle with no manual intervention required during service.
Tool-free magnetic gaskets — swap gaskets without tools, cutting maintenance downtime on a busy service day.
Specifications
Brand
Thermaster
Model / MPN
CBR1-3
Type
FlexDrawer Counter Refrigerator / Freezer
Gross Capacity
116 L
Net Capacity
77 L
Drawer Configuration
1 drawer with 3 x GN 1/1 150mm deep pan slots
Temperature Range
-22 to -18°C (freezer) & +2 to +8°C (fridge)
Refrigerant
R290 Natural Refrigerant
Max Ambient Temperature
40°C, 40% RH
Power
230V; 270W
Power Type
Electric
Construction
Stainless Steel
Defrost System
Automatic hot gas defrost
Controls
LED temperature display; one-touch fridge/freezer mode switch
Castors
90mm heavy-duty with front wheel lock
Product Dimensions
1230(W) x 700(D) x 605(H)mm
Packing Dimensions
1300(W) x 760(D) x 700(H)mm
Net Weight
90 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (product registration within 14 days of invoice required)
Venue suitability: Suited to commercial kitchens where under-counter ingredient access is critical — restaurants, cafes, hotels, catering operations, and food production sites running both fridge and freezer requirements. The FlexDrawer's low profile means it can sit under a range, fryer stand, or prep bench without raising the working surface height.
Explore our full range of Drawer Fridges or shop by brand at the Thermaster collection.
Installation & delivery: The CBR1-3 ships on heavy-duty 90mm castors for easy repositioning on site. Ensure a 230V single-phase power supply is available at the installation point. Dispatched Australia-wide.
Frequently asked questions
Can this unit run as both a fridge and a freezer?Yes — the CBR1-3 can switch between fridge mode (+2 to +8°C) and freezer mode (-22 to -18°C) at the touch of a button. Only one mode is active at a time per drawer.
How many GN pans does the drawer hold?The single drawer accepts 3 x GN 1/1 pans at 150mm depth, maximising accessible ingredient storage at worktop level.
What refrigerant does the CBR1-3 use?It uses R290, a natural hydrocarbon refrigerant with very low global warming potential and zero ozone depletion. R290 is CFC-free and compliant with current AU environmental standards.
What power supply is required?The CBR1-3 requires a standard 230V single-phase supply and draws 270W in operation — compatible with a standard commercial kitchen GPO.
What is the warranty on the CBR1-3?Thermaster provides 2 Years Parts & Labour plus an additional 2 Years Parts Only, provided the product is registered within 14 days of invoice. See full terms at our warranty page.
The Thermaster CBR1-2 is a single-drawer convertible chef base refrigerator/freezer that sits directly beneath cooking equipment, providing under-bench refrigerated storage with a flat stainless worktop. Operators can switch each drawer between fridge (+2 to +8°C) and freezer (-22 to -18°C) mode at the touch of a button, eliminating the need for a separate undercounter fridge and freezer unit.
Why operators choose the CBR1-2
Dual-mode drawer — switch between fridge and freezer without tools, maximising flexibility in tight kitchens
Convertible 51L net capacity — accepts GN1/1 150mm deep pans for direct prep-to-service workflow
R290 natural refrigerant — eco-friendly and Climate Class 4 rated for ambient temperatures up to 40°C
Automatic hot gas defrost — energy-saving cycle maintains temperature without manual intervention
Tool-free magnetic gaskets — field replacement without downtime; 90mm locking castors for easy repositioning
Specifications
Brand
Thermaster
Model / MPN
CBR1-2
Type
Drawer Fridge / Convertible Chef Base
Drawers
1
Net Capacity
51 L
Gross Volume
78 L
Pan Capacity
GN1/1 150mm deep
Temperature Range
-22 to -18°C (freezer) & +2 to +8°C (fridge)
Refrigerant
R290 Natural Refrigerant
Climate Class
4
Max Ambient Temperature
40°C, 40% RH
Power
230V; 240W (0.24 kW)
Power Type
Electric
Defrost
Automatic hot gas defrost
Castors
90mm heavy-duty with front wheel lock
Construction
Stainless Steel
Width
905mm
Depth
700mm
Height
605mm
Product Dimensions
905(W) x 700(D) x 605(H)mm
Packed Dimensions
975(W) x 760(D) x 700(H)mm
Net Weight
70 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration required within 14 days)
Venue suitability: Designed for high-throughput commercial kitchens, restaurants, hotels, and catering operations where space beneath cooking equipment is used for cold storage. The flat stainless worktop supports equipment placement directly on top of the unit. Suitable for any venue requiring flexible fridge/freezer capacity in a compact chef-base footprint.
Browse our full range of Drawer Fridges or explore the complete Thermaster refrigeration range.
Installation & delivery: The CBR1-2 arrives on 90mm lockable castors, ready for immediate positioning beneath existing equipment. No fixed installation required. Dispatched Australia-wide.
Frequently asked questions
Can I switch between fridge and freezer mode?Yes — the CBR1-2 is a convertible FlexDrawer unit. Each drawer's temperature mode is selectable via the LED control panel. Switch between fridge (+2 to +8°C) and freezer (-22 to -18°C) at any time without tools.
What refrigerant does the CBR1-2 use?R290 — a natural, low-GWP refrigerant that complies with modern environmental standards and is safe for use in commercial kitchen environments.
What size pans does the drawer hold?The CBR1-2 accepts GN1/1 pans up to 150mm deep, allowing direct transfer from prep table to cold storage without decanting.
What warranty is included?2 Years Parts & Labour plus 2 Years Parts Only — a total of up to 4 years coverage — provided the unit is registered with Thermaster within 14 days of invoice.
Can the unit be used in a hot kitchen environment?Yes — the CBR1-2 is Climate Class 4 rated, designed for ambient temperatures up to 40°C and 40% relative humidity, making it suitable for standard commercial kitchen conditions.
The Thermaster CBR2-3 is a 265-litre Flexdrawer counter refrigerator that gives commercial kitchens a space-saving under-bench storage solution with switchable fridge-to-freezer drawers — all in a single stainless steel unit on heavy-duty castors.
Why operators choose the CBR2-3
Dual temperature zones — each drawer switches independently between fridge (+2 to +8 °C) and freezer (−22 to −18 °C) at the touch of a button, eliminating the need for two separate units.
GN1/1 pan compatibility — 150 mm deep GN1/1 pans sit flat in each drawer, maximising usable storage for prep containers and raw ingredients.
Natural R290 refrigerant — low global-warming-potential refrigerant with automatic hot-gas defrost keeps running costs down and supports green kitchen credentials.
Worktop surface ready — flat stainless steel top provides an additional work surface above the unit, making full use of every square centimetre of kitchen real estate.
Low-maintenance design — magnetic gaskets replace tool-free, LED temperature display, and 90 mm heavy-duty front-locking castors allow easy repositioning during cleaning.
Specifications
Brand
Thermaster
Model / MPN
CBR2-3
Type
Flexdrawer Counter Refrigerator / Drawer Fridge
Gross Capacity
265 L
Net Capacity
154 L
Temperature Range
−22 to −18 °C (freezer) & +2 to +8 °C (fridge)
Refrigerant
R290 (natural)
Doors / Drawers
2
Door Type
Hinged Drawers
Pan Compatibility
GN1/1 150 mm deep
Power
230V; 500W; Single Phase
Max Ambient Temperature
40 °C, 40% RH
Climate Class
4
External Construction
Stainless Steel
Product Dimensions
1230(W) x 700(D) x 870(H) mm
Packed Dimensions
1300(W) x 760(D) x 965(H) mm
Net Weight
140 kg (store tag; supplier figure not confirmed)
Castors
90 mm heavy-duty with front wheel lock
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice)
Venue suitability: Ideal for commercial kitchens, café prep counters, hotel F&B operations, and butcher prep areas where bench space is limited and flexible cold storage is required. The switchable fridge/freezer capability makes it especially valuable in high-turnover prep environments. Browse our full range of Drawer Fridges or explore more Thermaster refrigeration equipment.
Installation & delivery: Single-phase 230V connection — no special electrical works required. Unit ships on 90 mm locking castors for easy final positioning. Dispatched Australia-wide.
Frequently asked questions
Can each drawer be set to a different temperature?Yes. Each drawer on the CBR2-3 can be independently switched between fridge (+2 to +8 °C) and freezer (−22 to −18 °C) mode, giving you dual temperature zones in one under-bench unit.
What pan size fits in the CBR2-3 drawers?The CBR2-3 is designed for GN1/1 pans up to 150 mm deep, allowing standard gastronorm containers to slide in and out without adapters.
What refrigerant does the CBR2-3 use?It uses R290, a natural hydrocarbon refrigerant with a very low global-warming potential. Defrost is handled automatically via a hot-gas defrost cycle.
Does the unit need a dedicated power circuit?No. The CBR2-3 runs on a standard single-phase 230V/500W supply, the same as most household and light-commercial outlets in Australia.
What warranty does the Thermaster CBR2-3 carry?The unit carries a 2-year Parts & Labour warranty plus an additional 2 years of Parts Only coverage — but product registration within 14 days of the invoice date is required to activate the full warranty.
The Thermaster CBR2-2 is a 179-litre Flexdrawer counter refrigerator designed for under-bench chef-base operation, offering independently switchable fridge or freezer mode on each drawer — making it one of the most versatile refrigerated bases available for commercial kitchen fit-outs.
Why operators choose the CBR2-2
Dual-zone flexibility — each drawer switches independently between fridge (+2 to +8°C) and freezer (-22 to -18°C) at the touch of a button, no additional plumbing required
R290 natural refrigerant — environmentally responsible, high-efficiency refrigerant with low global warming potential
GN1/1 pan compatibility — 150mm deep GN1/1 pans fit directly, maximising usable storage space under the pass
Tropical-rated performance — operates reliably up to 40°C ambient (40%RH), built for Australia's harshest kitchen environments
Hot-gas automatic defrost — energy-saving defrost cycle with no manual intervention required
Mobile and lockable — 90mm heavy-duty castors with front wheel lock for easy repositioning and secure station placement
Specifications
Brand
Thermaster
Model / MPN
CBR2-2
Type
Drawer Fridge (Flexdrawer Counter)
Gross Volume
179 L
Net Volume
102 L
Drawers
2
GN Pan Capacity
GN1/1 150mm deep
Temperature Range
-22 to -18°C (freezer) & +2 to +8°C (fridge)
Refrigerant
R290 (natural)
Max Ambient Temperature
40°C, 40%RH
Power
460W
Energy Consumption
9.07 kWh/24h
Construction
Stainless Steel
Castors
90mm heavy-duty with front wheel lock
Width
905mm
Depth
700mm
Height
870mm
Packed Dimensions
975(W) x 760(D) x 965(H)mm
Packed Weight
127kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Ideal for high-volume restaurants, hotel kitchens, catering operations, and QSR fit-outs where flexible cold storage under the cooking line is essential. The drawer format fits flush beneath commercial ranges and pass-through benches, and the dual-zone capability suits kitchens storing both proteins and dairy at different temperatures in a single footprint.
Explore the full range of Drawer Fridges available at Commercial Kitchen Store, or browse all Thermaster refrigeration equipment.
Installation & delivery: The CBR2-2 ships fully assembled on 90mm castors. Ensure adequate clearance at the front for drawer opening (approximately equal to the unit depth, 700mm). No hard plumbing is required. Dispatched Australia-wide.
Frequently asked questions
Can each drawer be set to a different temperature? Yes — each drawer operates independently and can be switched between fridge (+2 to +8°C) and freezer (-22 to -18°C) mode at the touch of a button on the LED control panel.
What refrigerant does the CBR2-2 use? The CBR2-2 uses R290, a natural hydrocarbon refrigerant with a very low global warming potential (GWP of 3) and no ozone depletion — compliant with current AU environmental requirements.
Will GN1/1 pans fit in the drawers? Yes — the drawers accept GN1/1 pans up to 150mm deep, maximising your cold storage capacity under the line.
Is the CBR2-2 suitable for Australian summer conditions? Yes — it is tropical-rated to operate in ambient temperatures up to 40°C at 40% relative humidity, which covers the vast majority of Australian commercial kitchen environments.
What does the warranty cover? The CBR2-2 carries a 2-year parts and labour warranty plus a further 2-year parts-only warranty (4 years total), provided the unit is registered with Thermaster within 14 days of invoice.
The Thermaster GNS1300-6D is a 6-drawer 304 stainless steel compact workbench fridge purpose-built for high-volume commercial kitchens where fast access to chilled prep ingredients is critical. Sitting at bench height, the 1368mm-wide unit fits under standard work surfaces and delivers 251L of net refrigerated storage across six GN1/2 drawers, keeping portioned proteins, dairy, and prep ingredients at a consistent 0–10°C.
Why operators choose the GNS1300-6D
Six GN1/2 drawers — full ergonomic access to chilled ingredients at waist height, eliminating the need to bend into a standard door fridge during service
304 AISI stainless steel interior and exterior — curved inner edges for easy cleaning; food-safe and corrosion-resistant in humid kitchen environments
Fan-assisted cooling with premium Embraco/Zanussi compressor and Dixell digital thermostat — precise temperature control from 0–10°C across the full cavity
Magnetic sealing strips on each drawer — removable without tools for cleaning, maintaining cold-air retention during busy service periods
On castors (40mm wheel height) — full mobility for cleaning underneath or repositioning without disconnecting
Specifications
Brand
Thermaster
Model / MPN
GNS1300-6D
Type
Drawer Fridge
Drawer Count
6
GN Pan Configuration
GN 1/2 drawers
Capacity (Net)
251 L
Temperature Range
0–10°C
Max Ambient Temperature
30°C at 55% RH
Cooling System
Fan-assisted
Compressor
Embraco / Zanussi
Thermostat
Digital — Dixell / Carel / Eliwell
Construction
304 AISI Stainless Steel (interior & exterior), curved inner edges
Power
240V; 235W / 10A
Product Dimensions (W × D × H)
1368 × 700 × 892mm
Packed Dimensions (W × D × H)
1450 × 800 × 920mm
Net Weight
120kg
Mobility
On wheels (40mm)
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The GNS1300-6D suits any commercial kitchen where prep speed and ingredient accessibility drive service — restaurants, hotels, catering operations, pub kitchens, and food-production facilities. The drawer format is especially valuable in high-turnover kitchens where chefs need to pull and replace chilled ingredients without breaking workflow. Explore the full range of Drawer Fridges or browse all Thermaster refrigeration for the complete line-up.
Installation & delivery: The GNS1300-6D arrives fully assembled and ready to connect to a standard 240V single-phase outlet. Position on a level floor with adequate ventilation clearance. On-wheel mobility simplifies placement. Dispatched Australia-wide.
Frequently asked questions
What GN pan size fits in each drawer?Each drawer is designed for GN 1/2 pans, giving you six individual GN 1/2 slots across the unit for organised ingredient separation.
What is the operating temperature range?The GNS1300-6D operates from 0°C to 10°C, suitable for standard refrigeration of proteins, dairy, and prepped ingredients.
What is the maximum ambient temperature for this unit?The unit is rated for operation up to 30°C ambient at 55% relative humidity — suitable for most commercial kitchen environments.
What warranty is included?The GNS1300-6D includes 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty when the product is registered within 14 days of invoice — 4 years total coverage.
Does the unit come with wheels?Yes — the GNS1300-6D ships on 40mm-height castors for easy repositioning and cleaning access beneath the unit.
The Thermaster GNS900-4D is a 4-drawer compact gastronorm workbench fridge built for high-volume commercial kitchens that need fast, low-disruption access to chilled ingredients directly at the prep surface.
Why operators choose the GNS900-4D
4 x GN 1/1 drawer configuration — keeps mise en place organised and close at hand without opening a full door
Fan-assisted cooling — consistent temperature distribution throughout the 88L net cabinet
Italian-made digital thermostat — precise temperature control via Dixell, Carel or Eliwell controller
Full stainless steel construction (AISI 304) — interior and exterior; curved inner corners for easy cleaning
Magnetic door seals — tool-free removal for cleaning; retains cold air efficiently
Specifications
Brand
Thermaster
Model / MPN
GNS900-4D
Type
Drawer Fridge
Drawers
4
GN Compatibility
4 x GN 1/1
Net Volume
88 L
Gross Volume
257 L
Temperature Range
0 to +10°C
Max Ambient Temperature
30°C, 55% RH
Power
240V; 155W; 10A
Total Energy Consumption
2.42 kWh/24h
Body / Material
Stainless Steel (AISI 304)
Product Dimensions (W x D x H)
903 x 700 x 892mm
Packed Dimensions (W x D x H)
750 x 940 x 1040mm
Net Weight
78 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Ideal for high-throughput kitchens in restaurants, pizzerias, cafes, and hotel kitchens where bench space serves double duty as cold storage and prep surface. The GNS900-4D fits neatly under a standard 900mm bench run. Browse our full range of Drawer Fridges and the complete Thermaster refrigeration range.
Installation & delivery: Plug-in electric unit (240V single phase); no specialist installation required beyond levelling on castors. Delivered on pallet via freight. Dispatched Australia-wide.
Frequently asked questions
How many GN pans does the GNS900-4D hold?The GNS900-4D accepts 4 x GN 1/1 pans — one per drawer — making it ideal for organised mise en place in busy prep kitchens.
What is the net storage capacity?The net usable volume is 88 litres. The gross cabinet volume is 257 litres.
What temperature range does this fridge maintain?The GNS900-4D operates between 0°C and +10°C, suitable for chilled food storage under Australian food safety requirements.
Is the unit fan-assisted or static cooling?It uses a fan-assisted cooling system, which ensures even temperature distribution across all four drawer compartments.
What is the warranty on the GNS900-4D?Thermaster provides 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty for units registered within 14 days of invoice date.
Looking for a fridge and freezer combo that has enough storage space for even the smallest of kitchens? Then the Polar U-Series Single Drawer Counter Fridge Freezer 3xGN will be perfect for you. The single drawer has enough room to fit 3 1/1 gastronorm pans creating enough storage to fit a large quantity of food.Boasting the compact design allows the fridge freezer to fit into small spaces including below worktops making it perfect for quick storage and easy access.And the temperature range of -20°C to 17°C means that it can be used as a fridge and freezer giving it multiple uses dependant on over-flow.The fan-assisted cooling feature ensures rapid temperature recovery after the drawer is opened keeping the food cooler for longer.And the auto defrost function helps make maintenance easy giving this fridge freezer long-lasting reliability.Including the sturdy lockable castor wheels allows for easy positioning wherever you need it so it can be kept steady once positioned without the risk of it moving or falling.The user-friendly digital temperature controls and display allows for easy operation for staff so they can easily change temperature depending on what's being stored.No technician is required to set up this machine, allowing you to use it almost instantly from delivery. This item should not be used for medical storage. Please refer to our catalogue for medical fridge/freezers. Product features Capacity 3 x 1/1GN Dimensions 605(H) x 1230(W) x 700(D)mm Dimensions - internal 205(H) x 1000(W) x 555(D)mm Material Stainless Steel Power Type 270W Refrigerant R290 / 70g Temperature Range -20°C to 17°C Voltage 230V Warranty 2 Years Weight 90kg Depth of shelf/drawer (GN sizing): 545 Total Usable Capacity (Litres) of unit: 77 Gems Rating: 2 Noise Level (Decibles): 42 Fan-assisted cooling ensures rapid temperature recovery after drawer is opened Auto defrost function to help with maintenance and long-lasting reliability Sturdy lockable castor wheels allow for easy positioning wherever you need it User-friendly digital temperature controls and display for easy operation Suitable for use in ambient temperatures up to 32°C 60KG drawer max weight capacity Not suitable for use in outdoor & mobile environments including catering vehicles.
Looking for a fridge and freezer combo that has enough storage space for even the smallest of kitchens? Then the Polar U-series single drawer counter fridge freezer will be perfect for you. Thanks to the stainless-steel material the fridge freezer is both strong and sturdy creating a long-lasting product within the busy kitchen environment.Also, the single drawer has enough room to fit 2 1/1 gastronorm pans creating enough storage to fit a large quantity of food.Boasting the compact design allows the fridge freezer to fit into small spaces including below worktops making it perfect for quick storage and easy access. And the temperature range of -20°C to 17°C means that it can be used as a fridge and freezer giving it multiple uses dependant on over-flow.Featuring the fan-assisted cooling ensure rapid temperature recovery after the drawer is opened keeping the food cooler for longer. And the auto defrost function helps make maintenance easy giving this fridge freezer long-lasting reliability.Including the sturdy lockable castor wheels allows for easy positioning wherever you need it so it can be kept steady once positioned without the risk of it moving or falling. The user-friendly digital temperature controls and display create an easy operation for staff so they can easily change temperature depending on what's being stored.No technician is required to set up this machine, allowing you to use it almost instantly from delivery. This item should not be used for medical storage. Please refer to our catalogue for medical fridge/freezers. Product features Capacity 2 x 1/1GN Dimensions 605(H) x 905(W) x 700(D)mm Dimensions - internal 205(H) x 675(W) x 555(D)mm Material Stainless Steel Power Type 240W Refrigerant R290 / 70g Temperature Range -20°C to 17°C Voltage 230V Warranty 2 Years Weight 72kg Depth of shelf/drawer (GN sizing): 545 Total Usable Capacity (Litres) of unit: 51 Gems Rating: 3 Noise Level (Decibles): 42 Fan-assisted cooling ensures rapid temperature recovery after drawer is opened Auto defrost function to help with maintenance and long-lasting reliability Sturdy lockable castor wheels allow for easy positioning wherever you need it User-friendly digital temperature controls and display for easy operation Suitable for use in ambient temperatures up to 32°C 60KG drawer max weight capacity Not suitable for use in outdoor & mobile environments including catering vehicles.
Specifications
Width: 905mm
Finish: Stainless Steel
Depth: 700mm