FED-X

The FED-X XSS7C13S2V-4D is a four-drawer commercial sandwich and salad prep counter refrigerator designed for high-volume prep kitchens. With a 259 L net capacity, raised GN pan rail holding 7×1/3 GN pans, and four heavy-duty pull-out drawers, it keeps ingredients cold and within arm's reach throughout a busy service. Why operators choose the XSS7C13S2V-4D Four heavy-duty drawers — smooth-action pull-out drawers replace hinged doors for faster access during service, reducing cold-air loss and improving workflow speed. 7×1/3 GN pan capacity — raised rear rail holds GN pans up to 150mm deep at countertop level, ready for immediate plating without transfer. Fan-forced Cubigel compressor system — Cubigel compressor with Dixell digital controller maintains +2 to +8°C in ambient conditions up to 43°C — tropicalised for Australian kitchens. R290 natural refrigerant — environmentally responsible hydrocarbon refrigerant with zero ODP and very low GWP; HFC- and CFC-free 60mm foam insulation throughout. Display top holds temp up to 4 hours — pre-chilled GN pan zone retains temperature for up to 4 hours, supporting menu prep shifts without power dependency. Specifications Brand FED-X Model / MPN XSS7C13S2V-4D Type Salad/Sandwich Prep Bar Fridge Drawers 4 Capacity (Net) 259 L Capacity (Gross) 282 L GN Pan Compatibility 7×1/3 GN Pan up to 150mm deep Temperature Range +2 to +8°C Ambient Temperature (Max) 43°C, 60% RH Cooling System Fan forced Compressor Cubigel Controller Dixell digital Refrigerant R290 Insulation 60mm HFC- and CFC-free foam Fans Ebm-papst evaporator & condenser Construction Stainless steel interior & exterior, rounded corners Power 240V; 50Hz; 10A; 320W Product Dimensions (W×D×H) 1360 × 700 × 1406mm Packed Dimensions (W×D×H) 1390 × 730 × 1160mm Net Weight 104 kg Mobility Heavy-duty castors with front wheel brakes Weight Loading Per Shelf 40 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: Ideal for pizza and sandwich restaurants, cafes, delis, hotel kitchens, and any operation where speed of ingredient access during service is critical. The four-drawer configuration suits prep lines where staff work along the counter without breaking stride to open full-height doors. Browse the full Salad Bar Fridges collection or explore all FED-X commercial refrigeration for companion equipment. Installation & delivery: Arrive fully assembled on castors — roll into position, level, and connect to a standard 10A GPO. No specialist installation required. Dispatched Australia-wide. Frequently asked questions Q: What GN pan sizes fit the display rail?A: The XSS7C13S2V-4D accommodates 7×1/3 GN pans up to 150mm deep in the raised countertop rail, making it compatible with standard salad, topping, and ingredient pans used across most commercial kitchens. Q: Can this unit operate in hot Australian kitchens?A: Yes. The unit is tropicalised for Australian conditions and rated for ambient temperatures up to 43°C at 60% relative humidity, covering the vast majority of Australian commercial kitchen environments. Q: What refrigerant does the XSS7C13S2V-4D use?A: It uses R290, a natural hydrocarbon refrigerant with zero ozone depletion potential and very low global warming potential — an environmentally responsible choice that also delivers efficient cooling performance. Q: How long does the display top maintain temperature if power is interrupted?A: When pre-chilled, the display top section can hold its temperature for up to 4 hours, giving operators a buffer during brief power interruptions or at the end of a service shift. Q: What electrical supply does this unit need?A: The XSS7C13S2V-4D requires a standard 240V/50Hz supply drawing 10A at 320W — a standard 10-amp GPO with no additional electrical work required in most commercial premises.

Read more less

The FED-X XUB6F18S3V is a three-door underbench freezer designed for high-volume commercial kitchens that need reliable below-zero storage at bench height. With 254L of net capacity across three independently sealed compartments, it maintains a consistent -18 to -22°C and is tropicalised for Australian ambient conditions up to 38°C. Why operators choose the XUB6F18S3V True underbench design — 850mm height fits under standard bench heights, freeing up floor space while keeping frozen product within arm's reach of the prep area. Fan-forced cooling with Dixell controller — digital temperature management and rapid recovery after door openings, reducing temperature fluctuation during service. Three independent solid doors — each with heavy-duty magnetic seals and self-closing hinges; one shelf per door included, additional sets available. R290 refrigerant — low global-warming-potential refrigerant in a 60mm HFC/CFC-free foam-insulated body; meets AU environmental standards. Stainless steel interior and exterior — rounded corners throughout for fast, compliant cleaning; Cubigel compressor with auto-defrost and heavy-duty evaporator and condenser fans. Specifications Brand FED-X Model / MPN XUB6F18S3V Type Underbench Freezer Net Capacity 254 L Gross Capacity 339 L Doors 3 × solid hinged Temperature Range -18 to -22°C Ambient Temperature 38°C (60% RH) Refrigerant R290 Cooling System Fan-forced Compressor Cubigel Controller Dixell (digital) Power 240V / 50Hz / 10A / 520W Energy Consumption 8.515 kWh/24h External Dimensions 1795(W) × 600(D) × 850(H)mm Internal Dimensions 1234 × 480 × 564mm Packed Dimensions 1825(W) × 630(D) × 910(H)mm Net Weight 107 kg Material Stainless Steel Included Accessories 1 shelf per door (additional shelf sets available) Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Country of Manufacture China Venue suitability: Suited to commercial kitchens, hotel back-of-house, catering operations, restaurant prep lines, and food service businesses that need reliable underbench frozen storage. Browse our full range of Under Bench Freezers or explore the complete FED-X collection. Installation & delivery: This unit ships on castors and can be positioned against a wall (rear-ventilated). Ensure 240V/10A single-phase supply is available. Dispatched Australia-wide. Frequently asked questions What is the difference between the 254L net capacity and 339L gross capacity?Gross capacity is the total interior volume before accounting for insulation, shelving rails, and compartment dividers. Net capacity (254L) is the usable storage space available for food product — always compare net figures when sizing against your storage needs. Can this unit be installed flush against a wall?Yes. The XUB6F18S3V is designed to be placed against a wall — the condenser is front-vented via the grille on the right-hand side, not rear-vented, so no rear clearance gap is required. How many shelves does it include and can I add more?One shelf per door comes included (three shelves total). Additional shelf sets are available from FED-X; each shelf is rated to 40 kg. Contact our team for compatible part numbers. What refrigerant does the XUB6F18S3V use, and is it AU-compliant?It uses R290 (propane-based), a natural refrigerant with a very low global-warming potential. R290 is fully compliant with Australian environmental regulations and the unit is fitted with 60mm HFC/CFC-free foam insulation. What does the warranty cover and how do I register?The XUB6F18S3V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of invoice. Registration is required to activate the full term.

Read more less

The FED-X XUB6C18S3V is a three-door underbench storage fridge designed for high-volume commercial kitchens that need reliable cold storage at bench height. Built on a fan-forced R290 refrigeration system with Cubigel compressor and Dixell digital controller, it maintains -2 to +8°C across all three sections and is tropicalised for Australian ambient conditions up to 43°C. Why operators choose the XUB6C18S3V Three independent sections — keep proteins, dairy, and prep items organised and accessible from a single bench-height unit without bending. Fan-forced cooling with rapid recovery — heavy-duty evaporator and condenser fans restore temperature quickly after each door opening during busy service. R290 refrigerant — HFC/CFC-free — 60 mm foam-insulated body with no harmful refrigerants, meeting modern environmental and certification standards. Self-closing magnetic doors with heavy-duty seals — reduces accidental temperature loss; doors can be placed against a wall for back-of-house flexibility. 304-grade stainless steel interior and exterior with rounded corners — fast wipe-down between service periods; no exposed edges to harbour bacteria. Specifications Brand FED-X Model / MPN XUB6C18S3V Type Undercounter Storage Fridge Net Capacity 254 L Gross Volume 339 L Doors 3 (solid, hinged, self-closing) Temperature Range -2 to +8°C Refrigerant R290 (HFC/CFC-free) Cooling System Fan-forced cooling Compressor Cubigel Controller Dixell digital Ambient Temperature Rating 43°C Power Supply 240V; 50Hz; 10A; 230W Energy Consumption 3.327 kWh/24h External Dimensions (W × D × H) 1795 × 600 × 850mm Internal Dimensions (W × D × H) 1234 × 480 × 564mm Packed Dimensions (W × D × H) 1825 × 630 × 910mm Net Weight 105 kg Shelf Load Capacity 40 kg per shelf Construction Stainless Steel (interior & exterior, rounded corners) Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: Suited to busy commercial kitchens in restaurants, cafes, hotels, aged care facilities, and institutional catering operations. The bench-height worktop doubles as usable prep surface, making this unit ideal for tight galley kitchens where every square metre counts. Browse the full range in Under Bench Fridges or explore all FED-X refrigeration. Installation & delivery: Single-phase 240V/10A connection — standard Australian GPO. Heavy-duty castors with front-wheel brakes for easy positioning. Unit can be placed directly against a wall. Dispatched Australia-wide. Frequently asked questions What is the net capacity of the XUB6C18S3V?The usable (net) capacity is 254 L across three sections. The gross volume is 339 L; the difference accounts for shelving, insulation, and airflow space. What refrigerant does the XUB6C18S3V use?It uses R290 (propane) — a natural refrigerant that is HFC/CFC-free. The 60 mm foam body insulation is also free from hydrofluorocarbons and chlorofluorocarbons. Is the unit suitable for hot Australian summers?Yes. The XUB6C18S3V is tropicalised and rated for ambient temperatures up to 43°C, making it reliable in non-air-conditioned kitchens and outdoor-servery environments across Australia. Does each door section have its own shelf?Each section comes with 1 shelf. Additional shelf sets are available — contact us for part numbers and pricing. What power connection does the fridge require?A standard 240V / 50Hz / 10A single-phase Australian outlet (GPO). Running power draw is 230W.

Read more less

The FED-X XGNS900E is a two-door refrigerated sandwich and salad prep fridge designed for small to medium commercial kitchens that need reliable cold storage with an integrated ingredient trough. The granite worktop holds 5 x 1/6th GN pans in an open refrigerated rail, keeping garnishes, toppings, and condiments within arm's reach of the prep line.Why operators choose the XGNS900E Integrated GN pan trough — 5 x 1/6th GN pan positions in the refrigerated top keep ingredients cold and accessible during service Fan-assisted cooling — consistent +2 to +8°C temperature throughout the 180L net chamber, driven by an Embraco/Secop compressor and Dixell digital controller Full stainless steel construction — interior and exterior in stainless steel with rounded internal corners for fast, thorough cleaning between services Granite worktop — hygienic, easy-to-clean granite prep surface alongside the pan trough; can be placed against the wall Heavy-duty magnetic door seals — replaceable seals maintain an airtight closure on both hinged doors; heavy-duty castors for repositioning Specifications Brand FED-X Model / MPN XGNS900E Type Salad / Sandwich Prep Fridge Doors 2 Door Type Hinged Gross Capacity 240 L Net Capacity 180 L GN Pan Capacity (top) 5 x 1/6th GN pans GN Compatibility (lower) 1 x GN 1/1 shelf per door Temperature Range +2 to +8°C Max Ambient Temperature 38°C, 60% RH Cooling System Fan-assisted Refrigerant R600A Compressor Embraco/Secop Controller Dixell digital Power 240V / 170W / 1.2A Construction Stainless Steel (interior & exterior) Weight Loading per Shelf 40 kg Net Weight 106 kg Product Dimensions (W x D x H) 903 x 700 x 1107 mm Internal Dimensions (W x D x H) 830 x 595 x 455 mm Packed Dimensions (W x D x H) 930 x 730 x 1260 mm Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: The XGNS900E suits restaurants, cafes, pizza shops, sandwich bars, clubs, and pubs where cold ingredient access during service is essential. Its compact 903 mm width fits tight prep lines. Browse all Salad Bar Fridges or explore the full range of FED-X commercial refrigeration.Installation & delivery: No plumbing required — plug-in 240V single phase. Unit can be placed against the wall. Pans and lids are not included; pan and pan cover must be used to ensure correct operating temperature. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XGNS900E?The lower cabinet has a net volume of 180L, with a gross volume of 240L. Each door section holds 1 x GN 1/1 compatible shelf.How many GN pans fit in the refrigerated top?The open-top refrigerated rail holds 5 x 1/6th GN pans. Pans and lids are not included with the unit and must be purchased separately.What refrigerant does the XGNS900E use?It uses R600A refrigerant, with an Embraco/Secop compressor and Dixell digital temperature controller.What is the operating temperature range?The unit operates at +2 to +8°C and is rated for a maximum ambient temperature of 38°C at 60% relative humidity.What warranty is included?The XGNS900E comes with 2 Years Parts & Labour plus 2 Years Parts Only, provided you register the product within 14 days of invoice date.

Read more less

The FED-X XGNS900D is a two-door refrigerated sandwich and salad prep fridge designed for commercial kitchens that need reliable cold ingredient storage and a ready-access GN pan rail on the prep line. The stainless steel cabinet holds 240L gross, with 5 x GN 1/6 pan positions in the refrigerated top trough keeping toppings and condiments cool during service.Why operators choose the XGNS900D Integrated GN pan trough — 5 x GN 1/6 pan slots in the refrigerated top keep ingredients within arm's reach during peak service periods Fan-assisted cooling — consistent +2 to +8°C temperature across the 240L cabinet, driven by an Embraco/Secop compressor with Dixell digital controller Full stainless steel construction — interior and exterior in stainless steel with rounded internal corners for fast, hygienic cleaning after each service Replaceable magnetic door seals — both hinged doors seal tightly; seals can be replaced on-site without specialist tools Mobile and wall-friendly — heavy-duty castors allow repositioning; unit can be placed against the wall for efficient kitchen layouts Specifications Brand FED-X Model / MPN XGNS900D Type Salad / Sandwich Prep Fridge Doors 2 Door Type Hinged Gross Capacity 240 L GN Pan Capacity (top rail) 5 x GN 1/6 slots (pans & lids not included) Temperature Range +2 to +8°C Max Ambient Temperature 38°C, 60% RH Cooling System Fan-assisted Refrigerant R600A Compressor Embraco/Secop Controller Dixell digital Power 240V / 50Hz / 10A / 170W Construction Stainless Steel (interior & exterior) Weight Loading per Shelf 40 kg Net Weight 81 kg Product Dimensions (W x D x H) 903 x 700 x 1020 mm Internal Dimensions (W x D x H) 830 x 595 x 455 mm Packed Dimensions (W x D x H) 930 x 730 x 1160 mm Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: The XGNS900D suits restaurants, cafes, pizza shops, sandwich bars, and food service operations where cold ingredient access at the prep station is essential. Its 903 mm width fits standard commercial prep-line configurations. Browse all Salad Bar Fridges or explore the full FED-X commercial refrigeration range.Installation & delivery: No plumbing required — plug-in 240V single phase. Unit can be placed against the wall. Pan and pan cover must be used to maintain correct operating temperature; pans and lids are not included. Dispatched Australia-wide.Frequently asked questionsWhat is the storage capacity of the XGNS900D?The XGNS900D has a gross capacity of 240L. The refrigerated top trough accommodates 5 x GN 1/6 pans for ingredient storage during service.How many GN pans fit in the refrigerated top rail?The open-top refrigerated rail holds 5 x GN 1/6 pan positions. Pans and lids are not included with the unit and must be purchased separately; pan and cover must be fitted to ensure correct operating temperature.What refrigerant does the XGNS900D use?It uses R600A refrigerant, with an Embraco/Secop compressor and Dixell digital temperature controller for precise, reliable performance.What is the operating temperature range?The unit maintains +2 to +8°C and is rated for use in ambient conditions up to 38°C at 60% relative humidity.What warranty is included?The XGNS900D comes with 2 Years Parts & Labour plus 2 Years Parts Only, provided the product is registered within 14 days of the invoice date.

Read more less

The FED-X XGNS900S is a refrigerated two-door salad and sandwich prep fridge designed to keep ingredients chilled and ready for service in high-throughput commercial kitchens. With a 240 L gross capacity, static cooling, and a multi-configuration GN pan layout, it handles busy prep stations in cafés, delis, restaurants, and catering operations. Why operators choose the XGNS900S 240 L capacity with flexible GN layout — accommodates 1x GN1/1 + 3x GN1/3 + 3x GN1/6 pans (pans and lids not included), giving prep cooks maximum ingredient variety at the line. Consistent +2°C to +8°C temperature — Dixell digital controller and Cubigel compressor maintain precise chilling even in 32°C ambient environments. Full stainless steel interior and exterior — rounded corners eliminate hidden grime pockets and make end-of-service wipe-down fast and thorough. Integrated cutting boards and digital controls — keeps the prep surface self-contained; replaceable magnetic door seals maintain cold integrity over time. Can be placed against the wall — ideal for tight galley-style kitchen layouts where space efficiency matters. Specifications Brand FED-X Model / MPN XGNS900S Type Salad/Noodle/Sandwich Prep Bar Fridge Capacity (Gross) 240 L Capacity (Net) 180 L Temperature Range +2°C to +8°C Ambient Temperature 32°C / 60% RH max Cooling System Static Compressor Cubigel Controller Dixell digital Doors 2 hinged doors GN Pan Configuration 1x GN1/1 + 3x GN1/3 + 3x GN1/6 (pans not included) Power Supply 240V / 10A / 240W Power Type Electric Construction Stainless Steel interior & exterior, rounded corners Product Dimensions 903W x 700D x 898H mm Packed Dimensions 1100W x 730D x 1050H mm Net Weight 100 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: The XGNS900S suits cafés, sandwich bars, sushi trains, delis, hotel kitchens, and catering prep areas that need reliable refrigerated ingredient access at the pass. It performs well in warm kitchens thanks to its 32°C ambient rating. Browse the full Salad Bar Fridges range or explore all FED-X refrigeration equipment available at Commercial Kitchen Store. Installation & delivery: The XGNS900S arrives fully assembled and is ready to plug in to a standard 10A GPO. Position on the heavy-duty castors and connect to power. Dispatched Australia-wide. Frequently asked questions What temperature does the XGNS900S operate at?The unit maintains a temperature range of +2°C to +8°C and is rated for ambient environments up to 32°C at 60% relative humidity. What GN pans fit in the XGNS900S?The XGNS900S accepts 1x GN1/1 + 3x GN1/3 + 3x GN1/6 pans. Pans and lids are not included and must be purchased separately. What is the capacity of this salad prep fridge?The gross capacity is 240 L, with a net (usable) capacity of 180 L. This provides ample room for a full ingredient selection across a busy service. What power supply does the XGNS900S require?It requires a standard 240V / 10A single-phase supply and draws 240W. A standard 10A GPO is sufficient — no dedicated circuit or hardwiring required. What warranty does the XGNS900S carry?FED-X covers the XGNS900S with 2 Years Parts & Labour plus an additional 2 Years Parts Only, provided the product is registered within 14 days of invoice.

Read more less

The FED-X XUB6C13G2V is a two-section underbench glass door refrigerator designed for continuous commercial service — keeping ingredients at safe temperature while maximising bench-top workspace above. Why operators choose the XUB6C13G2V 228L gross capacity across two glass doors — generous under-bench storage with full product visibility so staff can identify contents instantly without opening doors. Fan-forced cooling with Embraco/Secop compressor — delivers consistent -1 to +5°C throughout the cabinet, with a rapid recovery rate after frequent door openings. Stainless steel interior & exterior with rounded corners — durable, food-safe construction that cleans down fast between service periods. Self-closing doors with heavy-duty magnetic seals and LED interior lighting — reduces energy loss and aids stock visibility in low-light prep environments. Heavy-duty castors with front-wheel brakes — relocate easily for cleaning and lock securely in place during service; unit can be placed flush against the wall. Specifications Brand FED-X Model / MPN XUB6C13G2V Type Underbench Glass Door Refrigerator Gross Capacity 228 L Doors 2 Glass (Hinged, Self-Closing) Shelves 1 shelf per door Temperature Range -1 to +5°C Max Ambient Temperature 43°C at 60% RH Cooling System Fan-Forced Compressor Embraco / Secop Controller Dixell Digital Fans Ebm-papst evaporator & condenser Insulation 60mm HFC & CFC-free foam body Power 240V; 50Hz; 10A; 215W Energy Consumption 2.41 kWh/24h Construction Stainless Steel Interior & Exterior Mobility Heavy-duty castors with front-wheel brakes Product Dimensions 1360(W) x 600(D) x 850(H)mm Packed Dimensions 1390(W) x 630(D) x 910(H)mm Net Weight 83 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice) Country of Manufacture China Venue suitability: Suited to commercial kitchens, cafes, restaurants, catering operations, and food prep facilities requiring under-bench cold storage with immediate visual access to contents. Works well in high-ambient-temperature environments up to 43°C, making it practical for hot kitchen prep areas. Browse our full range of Under Bench Fridges or explore more FED-X refrigeration. Installation & delivery: Plug-in electric unit (240V single phase, 10A). Requires adequate ventilation clearance on sides. Unit can be positioned flush against the wall. Dispatched Australia-wide. Frequently asked questions What is the temperature range of the XUB6C13G2V?The XUB6C13G2V operates at -1 to +5°C, suitable for storing refrigerated food ingredients in commercial kitchen environments. What capacity is the XUB6C13G2V?The gross capacity is 228 litres split across two glass door sections, each with one adjustable shelf. What is the warranty on the XUB6C13G2V?FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only — 4 years total — when the unit is registered with FED within 14 days of invoice. Can the fridge be placed against a wall?Yes — the XUB6C13G2V is specifically designed to be positioned flush against the wall, allowing it to fit neatly into under-bench configurations without ventilation concerns at the rear. What electrical connection does it require?The unit runs on standard 240V single-phase power (10A, 215W) — no special electrical installation is required beyond a standard 10A outlet.

Read more less

The FED-X XGNS900-4D is a four-drawer compact workbench fridge that keeps ingredients at safe temperatures and within arm's reach of your prep team — without sacrificing worktop space above. Why operators choose the XGNS900-4D Full front-to-back access — Fulterer heavy-duty drawer runners let you grab items from the back without crouching or moving other stock. Ergonomic drawer design — no kneeling required; drawers pull smoothly to working height every time. Stainless steel inside and out — rounded internal corners make cleaning fast, even at the end of a long service. Wall placement ready — rear-venting compressor means the unit can sit flush against the wall, maximising your kitchen footprint. Precision Dixell controller — digital temperature management keeps the cabinet steady across its -2 to +8°C operating range. Specifications Brand FED-X Model / MPN XGNS900-4D Type Drawer Fridge Net Capacity 220 L Number of Drawers 4 Temperature Range -2 to +8°C Ambient Temperature 32°C / RH 60% Refrigerant R600A Compressor Embraco/Secop Controller Dixell External Dimensions 903(W) x 700(D) x 897(H)mm Internal Dimensions 830(W) x 595(D) x 455(H)mm Power Supply 240V / 170W / 1.2A Power Type Electric Construction Stainless Steel (interior & exterior) Country of Manufacture China Packed Dimensions 930(W) x 730(D) x 1050(H)mm Warranty 2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days) Venue suitability: The XGNS900-4D suits busy commercial kitchens where rapid ingredient access matters — cafes, restaurants, bakeries, pizza operations, and sandwich bars. The four-drawer layout is especially effective where multiple chefs work the same section simultaneously. Browse our full range of Drawer Fridges or explore more FED-X refrigeration. Installation & delivery: Standard 10A single-phase outlet required. The unit rolls on heavy-duty castors and can be positioned against the wall. Dispatched Australia-wide. Frequently asked questions What is the net capacity of the XGNS900-4D?The net usable capacity is 220 litres across the four drawers. What refrigerant does this unit use?The XGNS900-4D uses R600A refrigerant. Can the drawers hold GN 1/1 containers?Yes — each drawer is sized for GN 1/1 pans, making it compatible with standard gastronorm prep systems. What power supply is needed?The unit requires a standard 240V / 10A single-phase outlet and draws 170W. What does the warranty cover?The XGNS900-4D comes with 2 years parts and labour, plus an additional 2 years parts-only coverage when you register the product within 14 days of invoice.

Read more less

The FED-X XGNS1300B is a three-door undercounter workbench storage fridge that delivers consistent, reliable refrigeration at +2 to +8°C across 218 litres of net capacity. Built from stainless steel inside and out, it fits flush against any wall and serves as a worktop prep surface for busy commercial kitchens.Why operators choose the XGNS1300B Generous net capacity — 218 L across three independent compartments keeps mise en place, dairy, and prep ingredients organised and accessible at the same time. GN1/1 compatible — shelves and optional drawer runners accept standard gastronorm pans, so stock rotates straight from cool storage to service without re-plating. Stainless steel throughout — interior and exterior in stainless steel with rounded internal corners simplify end-of-service cleaning and resist corrosion in humid kitchen environments. Replaceable magnetic door seals — heavy-duty seals maintain optimal cooling efficiency and can be swapped in the field without specialist tools, reducing downtime. Wall-huggable footprint — rear-venting design allows placement directly against a wall, maximising usable kitchen floor space without sacrificing access. Specifications Brand FED-X Model / MPN XGNS1300B Type Undercounter Storage Fridge Net Capacity 218 L Gross Volume 368 L Doors 3 × Hinged Solid Stainless Steel Temperature Range +2 to +8°C Max Ambient Temperature 38°C at 60% RH Cooling System Static cooling Refrigerant R290 Compressor Embraco/Secop Controller Dixell digital GN Compatibility GN 1/1 Weight Loading Per Shelf 40 kg Electrical 240V / 240W / 1.6W standby Energy Consumption 5 kWh/24h Construction Stainless Steel (interior & exterior), rounded internal corners Product Dimensions 1368(W) × 700(D) × 897(H)mm Internal Dimensions 1295 × 595 × 455mm Packed Dimensions 1390(W) × 730(D) × 1050(H)mm Net Weight 104 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Country of Manufacture China Venue suitability: The XGNS1300B suits restaurants, cafes, clubs, pubs, bars, and food-service operations that need accessible cold storage at counter height. Its compact footprint and worktop surface make it equally at home as a prep station in tight galley kitchens or behind a busy bar. Browse our full range of Under Bench Storage Fridges or explore more from FED-X.Installation & delivery: The XGNS1300B ships on castors and can be positioned against a wall immediately on delivery. No plumbing is required — plug into a standard 240V single-phase outlet. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XGNS1300B?The net usable capacity is 218 litres, distributed across three compartments. The gross volume is 368 litres; the difference accounts for insulation and structural material.What refrigerant does the XGNS1300B use?The unit uses R290 (propane), a natural hydrocarbon refrigerant with a very low global warming potential (GWP of 3), compliant with current Australian environmental standards.Can the unit be placed directly against a wall?Yes. The XGNS1300B is designed to be placed against the wall without any clearance gap at the rear, which is noted on the supplier's specification sheet.Is the XGNS1300B compatible with gastronorm pans?Yes. The interior accepts GN 1/1 shelves and optional GN 1/1 drawer runners, so standard gastronorm containers drop straight in without adaptors.What warranty does the XGNS1300B carry?FED-X provides 2 Years Parts & Labour plus a further 2 Years Parts Only, for a total of 4 years of warranty coverage, provided the unit is registered within 14 days of invoice.

Read more less

The FED-X XGNS1300S is a three-door salad and sandwich prep fridge designed for high-volume commercial kitchens. It holds four full-size GN pans in the open top well and provides a chilled working surface at +2 to +8°C, making it ideal for pizza, salad bar, and deli-prep stations.Why operators choose the XGNS1300S 218L net capacity — a practical, accessible refrigerated storage volume beneath the prep surface. 4 x 1/1 GN pan capacity — works with your existing GN pan inventory for fast ingredient changes (pans and lids sold separately). +2 to +8°C static cooling — consistent temperature across the cabinet without fan-forced airflow drying ingredients. R290 natural refrigerant — low global-warming potential, compliant with current AU/NZ refrigerant direction. Stainless steel interior and exterior — rounded internal corners for fast, thorough cleaning; integrated stainless lid and cutting board included. Specifications Brand FED-X Model / MPN XGNS1300S Type Salad / Sandwich Prep Bar Fridge Net Capacity 218 L Gross Capacity 368 L Doors 3 Door Type Hinged GN Pan Capacity 4 x 1/1 GN (pans & lids not included) Cooling System Static cooling Temperature Range +2 to +8°C Refrigerant R290 Compressor Cubigel Controller Dixell digital Ambient Temperature 38°C, 60% RH (max) Power 240V; 50Hz; 10A; 240W External Material Stainless Steel Internal Dimensions 1295 x 595 x 455mm Product Dimensions (W x D x H) 1368 x 700 x 898mm Packed Dimensions (W x D x H) 1390 x 730 x 1050mm Net Weight 115 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: Suited to pizza restaurants, sushi bars, sandwich shops, cafes, delis, and catering operations requiring a high-volume, always-accessible prep refrigeration station. The three-door configuration gives multiple staff members simultaneous access without compromising cold-chain. Explore the full range in our Salad Bar Fridges collection, or browse all FED-X refrigeration for compatible accessories.Installation & delivery: Single-phase 240V connection (10A standard GPO). Unit can be placed against the wall — rear ventilation not required. Castors included for repositioning. Dispatched Australia-wide.Frequently asked questionsWhat is the difference between the 218L and 368L capacity figures?218L is the net usable refrigerated storage volume inside the base cabinet. 368L is the gross (total) volume including all internal structures. The 218L figure is what matters for practical ingredient storage.Are the GN pans and lids included?No — the XGNS1300S accommodates 4 x full-size (1/1) GN pans, but pans and lids are sold separately. The stainless steel integrated lid that covers the top prep rail is included.What refrigerant does this unit use?R290 (propane), a natural refrigerant with a very low global-warming potential. It is fully compliant with current Australian refrigerant regulations.Can this unit be positioned against a wall?Yes — the XGNS1300S is designed to be placed against a wall. Condensing unit ventilation is front-mounted, so no rear clearance is required.What warranty is provided?The XGNS1300S carries a 2-year Parts & Labour warranty plus a further 2-year Parts-Only warranty, provided the product is registered within 14 days of invoice. Total cover: 4 years with registration.

Read more less

The FED-X XGNS1300D is a three-door commercial salad prep fridge designed for high-volume food preparation in professional kitchens. With a 218 L net capacity and a stainless steel hinged lid opening to 8 × GN1/6 pan slots, it keeps ingredients chilled and accessible at the pass.Why operators choose the XGNS1300D GN-compatible top rail — 8 × GN1/6 pan slots under a hinged stainless steel lid for instant access to garnishes, sauces, and toppings. Fan-assisted cooling — Dixell digital controller with Embraco/Secop compressor holds a stable +2 to +8°C operating range. R290 natural refrigerant — low global-warming-potential gas, meeting current environmental standards. Rounded stainless steel interior — coved corners on all edges make cleaning fast between services; one GN1/1 shelf per door. Heavy-duty castors — fully mobile; unit can be placed against the wall with rear clearance. Specifications Brand FED-X Model / MPN XGNS1300D Type Salad/Noodle/Sandwich Prep Bar Fridge Net Capacity 218 L Gross Volume 368 L GN Pan Slots (top) 8 × GN1/6 Shelves 1 × GN1/1 per door Doors 3 × Hinged Doors Temperature Range +2 to +8°C Max Ambient Temperature 32°C, 60% RH Refrigerant R290 Cooling System Fan-assisted Compressor Embraco/Secop Controller Dixell (digital) Power 240V, 240W / 1.6A Construction Stainless Steel interior & exterior Internal Dimensions 1295 × 595 × 455mm Product Dimensions (W × D × H) 1368 × 700 × 1020mm Packed Dimensions (W × D × H) 1390 × 730 × 1160mm Net Weight 104 kg (supplier) / 130 kg (store — verify) Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: Ideal for restaurants, cafes, pubs, clubs, bars, and pizza shops that need fast topping access at the prep or service line. Browse our full range of Salad Bar Fridges or explore all FED-X refrigeration for complementary units.Installation & delivery: Requires a single-phase 240V/10A GPO. Unit can be positioned against the wall. Allow rear and side airflow clearance as directed in the installation guide. Dispatched Australia-wide.Frequently asked questionsWhat is the net capacity of the XGNS1300D?The XGNS1300D has a net capacity of 218 L across its three compartments. The gross volume is 368 L.Does the XGNS1300D use natural refrigerant?Yes — it uses R290, a natural hydrocarbon refrigerant with a low global warming potential (GWP of 3), compliant with current Australian standards.How many GN pans does the top rail hold?The hinged stainless steel lid opens to eight GN1/6 pan slots. Pans and pan covers are not included and must be sourced separately. Pan covers must be in place during operation to maintain the correct temperature.Can the XGNS1300D be placed against a wall?Yes — the unit is designed to sit flush against the wall. The compressor exhausts appropriately for this configuration; refer to the installation guide for exact clearance requirements.What warranty does the FED-X XGNS1300D carry?The XGNS1300D is covered by 2 years parts and labour plus a further 2 years parts-only coverage — 4 years total — when registered within 14 days of invoice.

Read more less

The FED-X XVRX2000/380 is a 2000mm flat-glass countertop prep fridge (saladette) designed to keep pre-portioned ingredients chilled and accessible across a full-length prep line. Its raised toughened-glass canopy provides full visibility of all nine GN 1/3 pans while maintaining a working temperature of +2 to +8°C in ambient environments up to 38°C. Why operators choose the XVRX2000/380 9 × GN 1/3 pan capacity — the widest bench configuration in the VRX range, ideal for high-volume pizza, sushi, salad, and deli prep stations that need a full ingredient spread in one unit. Static cooling system — gentle, fan-free refrigeration avoids drying out exposed ingredients between covers, keeping produce fresher for longer during service. Dixell digital temperature controller — precise +2 to +8°C setpoint with clear digital readout for straightforward HACCP compliance. Toughened-glass canopy — raised rail sneeze guard keeps product visible and hygienic for front-of-house or open-kitchen prep stations. Stainless steel interior and exterior — easy-clean surfaces built for high-use commercial environments with minimal maintenance. Angled pan positions — maximum pan depth 150mm; accommodates standard GN 1/3 pans at the correct working angle for quick scooping. Specifications Brand FED-X Model / MPN XVRX2000/380 Type Countertop Prep Fridge (Saladette) GN Pan Capacity 9 × GN 1/3 Temperature Range +2 to +8°C Cooling System Static cooling Refrigerant R600A Compressor Donper Controller Dixell digital Max Ambient Temperature 38°C (60% RH) Power 240V; 50Hz; 10A; 110W Power Type Electric Construction Stainless Steel (interior & exterior) Sneeze Guard Toughened glass canopy Max Pan Depth 150mm Internal Dimensions 1650 x 311 x 165mm Product Dimensions (W × D × H) 2000 × 395 × 439mm Packed Dimensions (W × D × H) 2090 × 460 × 460mm Net Weight 92 kg (team to confirm — see validation notes) Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (product registration within 14 days of invoice) Pans Included No — pans and pan covers must be sourced separately Venue suitability: The XVRX2000/380 suits high-volume pizza restaurants, sushi bars, delis, sandwich bars, and catering operations where a full 2000mm span of pre-portioned cold ingredients needs to be accessible without restocking mid-service. Browse our full range of Countertop Prep Fridges or explore all FED-X commercial refrigeration for the complete lineup. Installation & delivery: Plug-in 240V single-phase unit; no trade installation required. Position on a stable bench surface with adequate rear and side clearance for the condenser. Dispatched Australia-wide. Frequently asked questions What size GN pans fit the XVRX2000/380?The unit holds 9 × GN 1/3 pans with a maximum pan depth of 150mm. Pans are not included — they must be purchased separately. Do pans and pan covers need to be used?Yes — FED-X specifies that pans and pan covers must be used to ensure the unit maintains the correct operating temperature of +2 to +8°C. Operating without covers will affect temperature performance. What is the warranty on the XVRX2000/380?The unit comes with 2 Years Parts & Labour plus 2 Years Parts Only — 4 years total — provided you register the product within 14 days of your invoice date. What refrigerant does this unit use?The XVRX2000/380 uses R600A (isobutane), a low-GWP hydrocarbon refrigerant that is widely serviced across Australia. Can this unit operate in a hot kitchen environment?Yes — the XVRX2000/380 is rated to operate in ambient temperatures up to 38°C (60% relative humidity), making it suitable for standard commercial kitchen conditions.

Read more less

The FED-X XVRX2000/380S is a 2000mm refrigerated countertop salad bench (saladette) that holds 9 × 1/3 GN pans at prep temperature, built for high-output pizza, sandwich and salad stations that need constant ingredient access without opening a full fridge door.Why operators choose the XVRX2000/380S 9 × 1/3 GN pan capacity — full prep line of ingredients within arm's reach, no pan shuffle mid-service. Stainless steel lids — close the bench between rushes to maintain cold chain without wrapping every pan. +2 to +8°C holding range — keeps ingredients food-safe through an entire service; static cooling avoids product dehydration. Donper compressor + Dixell controller — reliable refrigeration core with precise digital temperature management. Stainless steel interior and exterior — hygienic, wipe-clean surfaces that hold up to a commercial kitchen environment. Angled pan positions and 150mm max pan depth — ergonomic access angle; pan divider included to subdivide sections. Heavy-duty condenser fans — maintain consistent cooling at up to 38°C ambient, suitable for hot kitchen environments. Specifications Brand FED-X Model / MPN XVRX2000/380S Type Refrigerated Countertop Salad Bench (Saladette) Capacity 9 × 1/3 GN Gross Volume 85 L Doors 2 (hinged stainless steel lids) Cooling System Static cooling Temperature Range +2 to +8°C Max Ambient Temperature 38°C, 60% RH Compressor Donper Controller Dixell Max Pan Depth 150mm Pan Divider Included (GN pans not included) Construction Stainless steel interior and exterior Power 240V / 50Hz / 10A / 110W Power Type Electric Product Dimensions 2000(W) × 395(D) × 281(H)mm Packed Dimensions 2090(W) × 460(D) × 460(H)mm Net Weight 35 kg Country of Manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration within 14 days of invoice Venue suitability: The XVRX2000/380S suits busy pizza restaurants, sandwich bars, burger venues and catering kitchens that need a full 2-metre wide ingredient station on the countertop. It pairs naturally with a pizza prep area or sandwich assembly line where speed and ingredient access define throughput.Browse the full range of Countertop Prep Fridges or explore the complete FED-X refrigeration range for matching units.Installation & delivery: Plug-in electric unit (240V, 10A standard single-phase outlet). No specialist installation required beyond positioning and plugging in. Dispatched Australia-wide.Frequently asked questionsDoes this unit come with GN pans? No — GN pans are not included. The unit holds up to 9 × 1/3 GN pans (max 150mm deep) and includes a pan divider. Source GN pans separately to suit your menu requirements.What is the maximum ambient temperature for this unit? The XVRX2000/380S is rated to operate in ambient conditions up to 38°C at 60% relative humidity — suitable for warm commercial kitchen environments.Can I close the unit between services? Yes — the stainless steel hinged lids allow you to close the bench to maintain the cold chain when the station is not in active use.What temperature range does it hold? The unit maintains +2 to +8°C using static cooling, which also avoids the product dehydration that fan-forced systems can cause with uncovered ingredients.What is the warranty on the XVRX2000/380S? It carries 2 years parts and labour, plus an additional 2 years parts only when the product is registered within 14 days of invoice — 4 years total coverage with registration.

Read more less

The FED-X XUB7F13S2V is a 2-door solid-door underbench freezer designed for high-output commercial kitchens that need reliable sub-zero storage directly at the prep line. Running on the eco-friendly R290 refrigerant and fan-forced cooling, it holds a net 186 L across two independent compartments and maintains temperatures between -18°C and -22°C even in ambient kitchen conditions up to 38°C.Why operators choose the XUB7F13S2V Prep-line convenience — underbench form factor positions frozen stock exactly where it is needed, cutting transit time and reducing service disruption. Stable temperature in hot kitchens — tropicalised design rated to 38°C ambient with Dixell digital controller for precise set-and-forget temperature management. GN1/1 pan compatibility — one shelf per door accommodates full-size gastronorm pans with 40 kg load rating per shelf, so no pan adapters or rearranging. Low-maintenance construction — stainless steel interior and exterior with rounded corners, self-closing doors with heavy-duty magnetic seals, and HFC/CFC-free foam insulation throughout. 4-year warranty coverage — 2 years parts and labour plus 2 years parts only when registered within 14 days of invoice, backed by FED nationwide stock in four states. Specifications Brand FED-X Model / MPN XUB7F13S2V Type Underbench Freezer Net Capacity 186 L Gross Capacity 282 L Doors 2 solid hinged Shelves 1 per door (GN1/1 compatible, 40 kg load per shelf) Temperature Range -18°C to -22°C Ambient Temperature Rating 38°C, 60% RH Refrigerant R290 Cooling System Fan-forced (EBM-PAPST evaporator and condenser fans) Compressor Embraco/Secop Controller Dixell digital Power 240V; 520W / 3.2A Energy Consumption 7.81 kWh/24h Construction Stainless steel interior and exterior, rounded corners Insulation 60mm HFC/CFC-free foam Door Seals Self-closing with heavy-duty magnetic seals Mobility Heavy-duty castors with front wheel brakes Internal Dimensions 799 x 580 x 564mm External Dimensions (W x D x H) 1360 x 700 x 850mm Packing Dimensions (W x D x H) 1390 x 730 x 910mm Net Weight 107 kg Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: The XUB7F13S2V suits commercial kitchens where frozen ingredient storage needs to sit directly within the prep zone — ideal for restaurants, cafes, hotels, catering operations, and institutional kitchens running continuous service. The underbench height integrates cleanly under standard work surfaces without interrupting bench space.Browse the full range of Under Bench Freezers or explore more products from FED-X available at Commercial Kitchen Store.Installation & delivery: This unit arrives fully assembled on castors and requires only a standard 10A 240V power point. Allow adequate clearance at the rear and sides for ventilation. Dispatched Australia-wide.Frequently asked questionsWhat is the difference between net capacity (186 L) and gross capacity (282 L)?Gross capacity is the total interior volume before insulation walls and shelving. Net (usable) capacity — 186 L — is the space actually available to store product. Always compare net figures across units.Is the XUB7F13S2V suitable for a kitchen that gets hot in summer?Yes. The unit is tropicalised and rated to operate in ambient temperatures up to 38°C at 60% relative humidity, which covers most Australian commercial kitchen environments.What refrigerant does this freezer use?R290 (propane) — a natural, low-GWP refrigerant with no ozone depletion potential and lower environmental impact than synthetic HFC refrigerants.Can I use full-size GN1/1 pans directly in this unit?Yes. Each door includes one shelf rated to 40 kg and dimensioned for GN1/1 pans without adapters.What does the warranty cover and how do I activate it?The warranty provides 2 years parts and labour plus a further 2 years parts only, totalling 4 years coverage. To activate the full 4-year term, the unit must be registered within 14 days of the invoice date.

Read more less

The FED-X XUB7C13S2D is a four-drawer underbench refrigerator designed to maximise cold storage in tight prep-line footprints. Housing four heavy-duty GN1/2 drawer compartments across two columns, it keeps ingredients chilled between -2°C and +8°C with a fan-force evaporator system and Dixell digital controller — all within a 1360mm-wide stainless steel worktop chassis. Why operators choose the XUB7C13S2D Four GN1/2 drawers — two columns of two drawers provide fast-access ingredient storage without opening a full-size door, reducing cold-air loss during busy service. Worktop-height chassis — 850mm height with a flat stainless top doubles as a prep surface and integrates flush with standard bench runs. Embraco/Secop compressor with Dixell control — proven commercial refrigeration drive train with digital temperature management and rapid recovery after frequent drawer access. R290 natural refrigerant — low global-warming-potential refrigerant suitable for Australian regulatory requirements; CFC & HFC free. Heavy-duty castors with front-wheel brakes — mobile for cleaning; locks in place during service; rear can be positioned flush to the wall. 60mm high-density foam insulation — CFC-free body insulation supports consistent -2 to +8°C operation in ambient temperatures up to 43°C. Specifications Brand FED-X Model / MPN XUB7C13S2D Type Underbench Drawer Fridge Capacity (Net) 186 L Drawer Count 4 (2 columns × 2 rows, GN1/2) Temperature Range -2 to +8°C Refrigerant R290 Cooling System Fan-force evaporator cooling Compressor Embraco/Secop Controller Dixell digital Power 240V; 215W / 1.3A Power Type Electric External Dimensions (W × D × H) 1360 × 700 × 850mm Internal Dimensions (W × D × H) 799 × 580 × 564mm Net Weight 102 kg Insulation 60mm CFC & HFC-free foam body Max Ambient Temperature 43°C / 60% RH Construction Stainless Steel interior & exterior, rounded corners Castors Heavy-duty with front-wheel brakes Country of Manufacture China Warranty 24 months parts & labour + 24 months parts only (register within 14 days) Venue suitability: The XUB7C13S2D suits commercial prep kitchens, sandwich bars, pizza stations, hotel kitchens, and any operation needing under-counter refrigeration with rapid-access drawer storage. The 1360mm-wide worktop integrates into standard bench-height cook lines and prep runs. Explore the full Drawer Fridge range or browse all FED-X commercial refrigeration to find the configuration that suits your kitchen layout. Installation & delivery: The XUB7C13S2D ships on heavy-duty castors and requires a standard 240V / 10A outlet — no hard-wiring needed. Allow 100mm clearance at the rear and sides for ventilation. Dispatched Australia-wide. Frequently asked questions What is the capacity of the XUB7C13S2D?The net usable capacity is 186 litres across four GN1/2 drawers. The gross volume (including insulation void) is 282 litres. What refrigerant does the XUB7C13S2D use?It uses R290 (propane), a natural refrigerant with a very low global-warming potential. R290 is CFC and HFC free and compliant with current Australian refrigeration regulations. What drawer size do the drawers accept?Each drawer accepts GN1/2 gastronorm pans. There are two drawer compartments per column, giving four drawers in total across the two-column chassis. What is the maximum ambient temperature the XUB7C13S2D can operate in?The unit is rated to operate in ambient conditions up to 43°C at 60% relative humidity, making it suitable for hot commercial kitchen environments. What warranty does the FED-X XUB7C13S2D carry?It includes 2 years parts & labour plus an additional 2 years parts-only coverage when you register the product within 14 days of invoice. See our warranty information page for full details.

Read more less

The FED-X XCB-36 is a refrigerated chef base drawer bench that positions cold ingredient storage directly beneath your Gaxmax or compatible cooking equipment, keeping mise en place within arm's reach at pass temperature while freeing up conventional fridge space. With a 184-litre gross capacity across two full-width drawers, it is designed to sit beneath a countertop cooking suite and double as a heavy-duty worktable surface. Why operators choose the XCB-36 Two full-width refrigerated drawers — keep prepped ingredients cold at the cookline without breaking stride; each drawer runs on Austrian Fulterer runners for smooth, reliable operation Raised-edge stainless worktop — the flat top doubles as a prep and plating surface directly above the cooking suite, maximising tight kitchen footprints HFC/CFC-free R290 refrigerant — environmentally compliant refrigerant with fan-forced evaporator cooling for rapid temperature recovery after each drawer open Tropicalised for Australian conditions — rated to 32°C ambient / 65% RH, purpose-built for hot commercial kitchen environments Heavy-duty mobility — four castors with front-wheel brakes allow repositioning for cleaning and maintenance without disconnecting the unit Specifications Brand FED-X Model / MPN XCB-36 Type Refrigerated Chef Base / Drawer Fridge Capacity (Gross) 184 L Capacity (Net) 162 L Drawers 2 Temperature Range -1 to +5°C Ambient Temperature Rating 32°C / 65% RH Refrigerant R290 Power 240V, 396W, 10A Energy Consumption 3.241 kWh/24h Construction Stainless steel interior & exterior, rounded corners Insulation 60mm HFC/CFC-free foam body insulation Cooling Fan-forced evaporator Controls User-friendly digital controls Door Runners Austrian Fulterer runners Gaskets Removable magnetic drawer gaskets Pan Compatibility GN pan, 100mm height (sold separately) Product Dimensions (W x D x H) 924 x 816 x 658mm Internal Depth 530mm Packed Dimensions (W x D x H) 886 x 990 x 724mm Net Weight 85 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice) Venue suitability: The XCB-36 suits high-volume kitchens where cookline efficiency is paramount — hotel restaurants, high-turnover cafes, contract catering operations, and food manufacturing with a hot-side cooking suite. Its compact 658mm height places the worktop at a practical pass height beneath countertop cooking equipment. It is tropicalised for the demands of Australian commercial kitchen environments, including high-ambient temperature and humidity conditions. Explore our full range of Drawer Fridges and the complete FED-X commercial refrigeration lineup. Installation & delivery: The XCB-36 arrives fully assembled on heavy-duty castors — connect to a standard 240V/10A GPO and it is ready to operate. Ensure a minimum 100mm rear clearance for compressor ventilation. Dispatched Australia-wide. Frequently asked questions What GN pan size fits the XCB-36 drawers?Each drawer is compatible with gastronomy pans (GN pans) up to 100mm in height. GN pans are sold separately. The unit requires a GN pan to use the storage function effectively. Can the XCB-36 support countertop cooking equipment on top?Yes — the raised-edge stainless steel worktop is designed to support compatible countertop cooking equipment, and the unit is purpose-built to serve as a refrigerated base beneath Gaxmax and similar cooking suites. Check the weight rating of your specific cooking equipment against the worktop load specification. What is the warranty on the XCB-36?The XCB-36 carries a 2-Year Parts & Labour warranty plus an additional 2-Year Parts-Only warranty — 4 years total — when the product is registered within 14 days of invoice date. Is the XCB-36 suited to hot or humid kitchen environments?Yes — the unit is tropicalised for Australian commercial kitchen conditions and is rated to operate at up to 32°C ambient temperature and 65% relative humidity. What refrigerant does the XCB-36 use?The XCB-36 uses R290 (propane), an HFC/CFC-free natural hydrocarbon refrigerant. R290 has a very low global warming potential (GWP) and is fully compliant with current Australian environmental standards.

Read more less

The FED-X XGNS900B is a two-door undercounter storage fridge that delivers professional-grade commercial refrigeration in a compact 900mm-wide footprint. Engineered for restaurants, cafes, clubs, pubs, bars and commercial kitchens that need a reliable cold-storage worktop without sacrificing bench space. Why operators choose the XGNS900B Compact 900mm width — fits under standard bench heights and against the wall, maximising usable floor space in tight kitchens 180L net capacity with GN1/1 compatibility — stores full-size gastronorm pans on the shelf or via optional drawer slides for fast service-line access Static cooling system — no fan noise or fan-driven moisture loss, keeping ingredients fresher for longer Fulterer heavy-duty drawer runners & replaceable magnetic door seals — built for high-frequency opening in busy commercial environments Stainless steel interior and exterior with rounded corners — meets commercial food safety standards and cleans quickly between service periods Specifications Brand FED-X Model / MPN XGNS900B Type Undercounter Storage Fridge Net Capacity 180 L Gross Capacity 240 L Number of Doors 2 (solid stainless steel) GN Compatibility GN 1/1 shelf or GN 1/1 drawer Temperature Range -2 to +8°C Max Ambient Temperature 38°C, 60% RH Cooling System Static cooling Refrigerant R600A Compressor Embraco / Secop Controller Dixell digital Max Shelf Load 40 kg per shelf Internal Dimensions 830 x 595 x 455mm (W x D x H) External Dimensions 903 x 700 x 897mm (W x D x H) Packed Dimensions 930 x 730 x 1050mm (W x D x H) Net Weight 85 kg Construction Stainless steel interior and exterior Power 240V / 50Hz / 170W / 1.2A Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: The XGNS900B is suited to high-turnover venues requiring accessible cold storage directly at the work surface — ideal for restaurant prep lines, cafe service counters, club bars, pub under-bar setups, bakeries and commercial catering operations. Its wall-flush design makes it a practical choice where floor footprint is at a premium. Explore our full range of Under Bench Storage Fridges or browse all FED-X commercial refrigeration to find the right configuration for your kitchen. Installation & delivery: The XGNS900B arrives fully assembled on heavy-duty castors. Position on a level surface with adequate ventilation clearance. Unit can be placed flush against the wall. Dispatched Australia-wide. Frequently asked questions What is the net capacity of the XGNS900B?The XGNS900B has a net usable capacity of 180 litres. The gross volume (total internal volume) is 240 litres. Is the XGNS900B GN pan compatible?Yes. The storage compartment accepts GN 1/1 pans on the standard shelf. Optional additional slides allow GN 1/1 drawers to slide in and out for faster service access. What refrigerant does the XGNS900B use?The XGNS900B uses R600A (isobutane), a low-GWP refrigerant that offers high energy efficiency and is compatible with current Australian regulations. Can the unit be placed against a wall?Yes. The XGNS900B is designed so that it can be placed flush against the wall without requiring rear clearance for the condenser. What is the warranty on the XGNS900B?The XGNS900B carries 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty — a total of up to 4 years coverage — when the product is registered within 14 days of invoice.

Read more less

The FED-X XVRX1800/380 is a refrigerated countertop prep fridge that chills 8 x 1/3 GN pans of toppings and garnishes behind a toughened glass canopy, keeping ingredients at safe service temperature on the line. Why operators choose the XVRX1800/380 8 x 1/3 GN pan rail — holds a full spread of toppings within easy reach for pizza, salad and sandwich assembly. +2 to +8°C static cooling — holds prepped ingredients in the safe food zone through service. Toughened glass canopy — guards pans and keeps cold air in while showcasing the spread. Stainless steel interior and exterior — wipes down fast and stands up to a busy commercial kitchen. Dixell digital controller & Donper compressor — precise, reliable temperature management. Specifications Brand FED-X Model / MPN XVRX1800/380 Type Countertop Prep Fridge Capacity 8 x 1/3 GN Temperature range +2 to +8°C Cooling system Static cooling Refrigerant R600A Compressor Donper Controller Dixell digital Max pan depth 150mm Max ambient 38°C / 60% RH Construction Stainless steel interior and exterior Canopy Toughened glass Internal dimensions 1450 x 311 x 165mm External dimensions 1800(W) x 395(D) x 439(H)mm Packed dimensions 1890(W) x 1800(D) x 460(H)mm Net weight 76 kg Power 240V; 50Hz; 10A; 110W Country of manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: Built for pizzerias, sandwich and salad bars, cafes and takeaways that assemble made-to-order plates and need chilled toppings within arm's reach on the bench. It sits naturally alongside our other Countertop Prep Fridges and the wider FED-X refrigeration range when you are matching the rail to an existing prep setup. Installation & delivery: Plugs into a standard 240V outlet — place on a sound bench, allow clearance around the compressor and let it stand before loading. Dispatched Australia-wide. Frequently asked questions How many pans does the XVRX1800/380 hold? It takes 8 x 1/3 GN pans across the rail. Pans are not included. What temperature does it run at? It holds +2 to +8°C using static cooling, suited to chilled toppings and garnishes. What refrigerant does it use? R600A. Do I need to use pan covers? Yes — pans and pan covers must be used to maintain the correct operating temperature. What are the internal dimensions? The chilled well measures 1450 x 311 x 165mm, with a maximum pan depth of 150mm.

Read more less

The FED-X XVRX1800/380S is a 1800mm countertop prep fridge (salad bench) designed for high-volume food preparation in commercial kitchens. It features two hinged stainless steel lids, static cooling with a Donper compressor, and Dixell digital temperature control, holding product at +2 to +8°C for safe holding of prepped ingredients through service. Why operators choose the XVRX1800/380S Eight GN 1/3 pan positions — maximise mise en place coverage during peak service with angled pan positions and 150mm max pan depth across the full 1800mm bench width. Two-door access — split access along the bench means multiple cooks can work the station simultaneously without disrupting adjacent prep areas. Stainless steel throughout — interior and exterior construction for hygiene, durability, and compliance with commercial kitchen standards. Reliable static cooling — Donper compressor with Dixell digital controller ensures consistent +2 to +8°C holding without air blast drying out produce. Heavy-duty condenser fans — maintain performance in demanding ambient environments up to 38°C. Pan divider included — quick organisation of prepped ingredients; pans are sold separately, giving you flexibility on GN sizing. Specifications Brand FED-X Model / MPN XVRX1800/380S Type Countertop Prep Fridge (Salad Bench) Capacity 8 x GN 1/3 Doors 2 Door Type Hinged Temperature Range +2 to +8°C Max Ambient Temperature 38°C at 60% RH Cooling System Static cooling Compressor Donper Controller Dixell digital Max Pan Depth 150 mm Pan Divider Included (pans not included) External Material Stainless Steel (interior & exterior) Power 240V; 50Hz; 10A; 110W Power Type Electric (Single Phase) Width 1800 mm Depth 395 mm Height 281 mm Product Dimensions 1800(W) x 395(D) x 281(H) mm Packed Dimensions 1890(W) x 460(D) x 460(H) mm Net Weight 32 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice) Venue suitability: Ideal for high-volume cafes, restaurants, delis, sandwich bars, pizza stations, and catering operations requiring fast access to prepped ingredients across a wide service run. The 1800mm width suits double-staffed prep stations and high-output service lines, while the 281mm body height fits under most standard bench heights. Browse our full range of Countertop Prep Fridges or explore all FED-X refrigeration equipment. Installation & delivery: Single-phase 240V — plugs into a standard 10A outlet with no special installation required. Ensure adequate airflow clearance around the condenser. Dispatched Australia-wide with stock held in Sydney, Brisbane, Melbourne, and Perth for faster regional delivery. Frequently asked questions Do pans come included with the XVRX1800/380S?No. The unit includes a pan divider but pans are sold separately. It accommodates GN 1/3 pans up to 150mm deep across 8 positions. What is the power requirement?The XVRX1800/380S runs on single-phase 240V / 50Hz and draws 10A at 110W — compatible with a standard 10A GPO. What warranty is included?FED-X provides 2 years parts and labour plus an additional 2 years parts only, provided the unit is registered within 14 days of invoice date. What is the maximum ambient temperature the unit can operate in?The XVRX1800/380S is rated for ambient temperatures up to 38°C at 60% relative humidity — suitable for most commercial kitchen environments. What is the capacity and how many GN pans does it hold?The bench holds 8 x GN 1/3 pans (up to 150mm deep) in angled positions across the 1800mm width, with a pan divider included for quick organisation of prepped ingredients.

Read more less

The FED-X XUB6C13S2V is a two-door underbench storage fridge designed for high-demand commercial kitchens. With a 170L net capacity across two solid hinged-door sections, tropical-rated construction, and a stainless steel worktop surface, it fits under standard commercial bench height while delivering reliable temperature control from -2°C to +8°C. Why operators choose the XUB6C13S2V Proven tropical rating — operates in ambient temperatures up to 43°C (60% RH), purpose-built for Australian commercial conditions. Fan-forced cooling with Cubigel compressor — rapid recovery rate after door openings; heavy-duty evaporator and condenser fans maintain consistent temperatures throughout service. R290 natural refrigerant — HFC- and CFC-free hydrocarbon refrigerant with 60mm foam body insulation for energy-efficient, environmentally responsible operation. Self-closing doors with magnetic seals — heavy-duty magnetic door seals and self-closing hinges reduce temperature fluctuation and energy waste in busy kitchen environments. Easy-clean stainless interior and exterior — rounded corners throughout; Dixell digital controller for precise, user-friendly temperature management. Specifications Brand FED-X Model / MPN XUB6C13S2V Type Underbench Storage Fridge Doors 2 Door Type Hinged Solid Doors Capacity (Net) 170 L Gross Volume 228 L Temperature Range -2 to +8°C Refrigerant R290 (natural hydrocarbon, HFC/CFC-free) Cooling System Fan-forced cooling Compressor Cubigel Controller Dixell digital Ambient Temperature Rating 43°C, 60% RH (tropical-rated) Power 240V; 50Hz; 10A; 215W Total Energy Consumption 2.196 kWh/24h Material Stainless Steel (interior and exterior) Insulation 60mm HFC/CFC-free foam body Weight Loading Per Shelf 40 kg Internal Dimensions 799 x 480 x 564mm Product Dimensions (W x D x H) 1360 x 600 x 850mm Package Dimensions (W x D x H) 1390 x 630 x 910mm Net Weight 83 kg (supplier spec; store lists 92 kg — verify) Country of Manufacture China Warranty 2 Years Parts and Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: Suited to cafes, restaurants, food courts, catering operations, and hotel kitchens requiring compact underbench refrigeration. Fits under standard 900mm bench height; can be placed directly against a wall. Ideal as a mise en place fridge or ingredient prep station. Browse our full range of Under Bench Fridges or explore other products from FED-X. Installation & delivery: The XUB6C13S2V ships with heavy-duty castors (front wheel brakes included) for easy positioning. Allow adequate clearance for ventilation. Dispatched Australia-wide. Frequently asked questions What is the net capacity of the XUB6C13S2V?The net usable capacity is 170L (across two compartments). The gross volume is 228L. Is the XUB6C13S2V suitable for Australian summer conditions?Yes — it is tropical-rated to operate in ambient temperatures up to 43°C at 60% relative humidity, making it suitable for Australian commercial kitchens year-round. What refrigerant does this unit use?It uses R290, a natural hydrocarbon refrigerant that is HFC- and CFC-free, with a low global warming potential compared to conventional commercial refrigerants. How many shelves does each door section include?Each door section includes one shelf as standard, with additional shelf sets available separately. What warranty applies?The XUB6C13S2V carries a 2 Years Parts and Labour warranty plus a further 2 Years Parts Only warranty, provided the unit is registered within 14 days of invoice.

Read more less

The FED-X XUB6F13S2V is a two-door stainless steel underbench storage freezer built to hold 170 litres of frozen product at a steady -18°C to -22°C beneath a stainless worktop, keeping freezer stock within arm's reach on a busy line.Why operators choose this freezer Fan-forced cooling with R290 refrigerant — even temperatures and a rapid recovery rate that hold -18°C to -22°C through service. Tropicalised for Australian conditions — rated to run in ambients up to 38°C at 60% RH, so it copes with hot kitchens. Stainless steel inside and out — rounded internal corners and 60mm CFC/HFC-free foam insulation for easy cleaning and low running cost. Self-closing solid doors — heavy-duty magnetic seals and a shelf per door keep cold in and stock organised. Mobile and wall-friendly — heavy-duty castors with front-wheel brakes and a design that sits flush against a wall. Specifications Brand FED-X Model / MPN XUB6F13S2V Type Underbench Storage Freezer (2 solid doors) Net Capacity 170 L Gross Volume 228 L Temperature Range -18°C to -22°C Cooling System Fan-forced cooling Refrigerant R290 Compressor Cubigel Controller Dixell Max Ambient 38°C at 60% RH Doors 2 (self-closing, magnetic seals) Shelves 1 per door (40kg load per shelf) Insulation 60mm CFC/HFC-free foam External Dimensions 1360mm W x 600mm D x 850mm H Internal Dimensions 799mm W x 480mm D x 564mm H Net Weight 107 kg Power 240V / 50Hz / 10A / 520W Material Stainless Steel Country of Manufacture China Venue suitability: The compact 1360mm underbench footprint suits cafes, bars, takeaway shops and restaurant cooklines that need frozen storage at bench height without a dedicated cold room. It slots neatly into a run of Under Bench Freezers, and sits alongside the rest of the FED-X refrigeration range for a matched stainless fit-out.Installation & delivery: Runs on a standard 240V 10A power point — plug in, allow to reach temperature and load. Heavy-duty braked castors make positioning easy, and the cabinet can sit flush against a wall. Dispatched Australia-wide.Frequently asked questionsWhat temperature does the FED-X XUB6F13S2V hold? It operates as a freezer across a -18°C to -22°C range, using fan-forced cooling and R290 refrigerant for even temperatures and fast recovery.How much can this underbench freezer store? It has a 170-litre net capacity (228-litre gross), with one shelf per door rated to 40kg and additional shelf sets available.What are the external dimensions? The cabinet measures 1360mm wide x 600mm deep x 850mm high, designed to fit under a standard bench, with an internal storage space of 799mm W x 480mm D x 564mm H.Is it suitable for hot Australian kitchens? Yes — it is tropicalised and rated to run in ambient temperatures up to 38°C at 60% relative humidity.What warranty is included? It carries 2 years parts and labour, plus a further 2 years parts only for units registered within 14 days of invoice.

Read more less

The FED-X XVRX1500/380S is a 1500mm refrigerated countertop prep fridge (raised-rail saladette) that keeps gastronorm pans of garnishes, toppings and proteins chilled and within reach at the make line.Why operators choose the XVRX1500/380S 6 x 1/3 GN pan capacity — holds a full topping range across the 1500mm rail with a pan divider included. +2 to +8°C static cooling — food-safe holding for prepped ingredients through service. Stainless steel lid — covers the wells to protect product and hold temperature when the line is idle. Donper compressor & Dixell controller — proven refrigeration components with accurate temperature control. Stainless steel interior and exterior — durable, wipe-clean and corrosion-resistant for a busy kitchen. Specifications Brand FED-X Model / MPN XVRX1500/380S Type Countertop Prep Fridge Pan capacity 6 x 1/3 GN Cooling system Static cooling Temperature range +2 to +8°C Max ambient 38°C, 60% RH Compressor Donper Controller Dixell Doors 1 (hinged) Maximum pan depth 150mm Construction Stainless steel interior and exterior Lid Stainless steel Power 240V; 50Hz; 10A; 110W Product dimensions 1500(W) x 395(D) x 281(H)mm Packed dimensions 1590(W) x 460(D) x 460(H)mm Net weight 28kg Country of manufacture China Warranty 2 years parts & labour + 2 years parts only with product registration Venue suitability: Suited to sandwich bars, salad bars, pizzerias and cafe make-lines where toppings need to stay chilled and accessible at the counter. It sits within our Countertop Prep Fridges range and the wider FED-X refrigeration line-up.Installation & delivery: Plug-in 240V operation — no special installation required. Dispatched Australia-wide.Frequently asked questionsHow many pans does the XVRX1500/380S hold? It holds 6 x 1/3 GN pans along the 1500mm rail, with a pan divider included. Pans are not supplied.What temperature does it operate at? It runs at +2 to +8°C using a static cooling system, rated for ambient conditions up to 38°C and 60% relative humidity.What is the maximum pan depth? The wells accept gastronorm pans up to 150mm deep.Does it have a lid? Yes — this model is fitted with a stainless steel lid to cover the wells and help hold temperature.What warranty does it come with? 2 years parts and labour, plus a further 2 years parts only when the product is registered within 14 days of invoice.

Read more less

The FED-X XVRX1500/380 is a 1500mm flat-glass countertop prep fridge (saladette) designed to keep pre-portioned ingredients chilled and accessible on the prep line. Its raised toughened-glass canopy provides full visibility of pans while maintaining a working temperature of +2 to +8°C in ambient environments up to 38°C. Why operators choose the XVRX1500/380 6 × GN 1/3 pan capacity — holds a full ingredient set for salads, sushi, pizza, or sandwich prep without restocking mid-service. Static cooling system — gentle, fan-free refrigeration avoids drying out exposed ingredients between covers. Dixell digital temperature controller — precise +2 to +8°C setpoint with clear digital readout for HACCP compliance. Toughened-glass canopy — raised rail sneeze guard keeps product visible and hygienic for front-of-house or open-kitchen prep stations. Stainless steel interior and exterior — easy-clean surfaces built for high-use commercial environments. Angled pan positions — maximum pan depth 150mm; accommodates standard GN 1/3 pans at the correct working angle. Specifications Brand FED-X Model / MPN XVRX1500/380 Type Countertop Prep Fridge (Saladette) GN Pan Capacity 6 × GN 1/3 Temperature Range +2 to +8°C Cooling System Static cooling Refrigerant R600A Compressor Donper Controller Dixell digital Max Ambient Temperature 38°C (60% RH) Power 240V; 50Hz; 10A; 110W Power Type Electric Construction Stainless Steel (interior & exterior) Sneeze Guard Toughened glass canopy Max Pan Depth 150mm Internal Dimensions 1150 x 311 x 165mm Product Dimensions (W × D × H) 1500 × 395 × 439mm Packed Dimensions (W × D × H) 1590 × 460 × 460mm Net Weight 72 kg Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (product registration within 14 days of invoice) Pans Included No — pans and pan covers must be sourced separately Venue suitability: The XVRX1500/380 suits pizza restaurants, sushi bars, cafes, delis, and sandwich bars where pre-portioned cold ingredients need constant access across a 1500mm prep span. It sits directly on a bench or counter and requires no under-bench installation. Browse our full range of Countertop Prep Fridges or explore all FED-X commercial refrigeration for the complete lineup. Installation & delivery: Plug-in 240V single-phase unit; no trade installation required. Position on a stable bench surface with adequate rear and side clearance for the condenser. Dispatched Australia-wide. Frequently asked questions What size GN pans fit the XVRX1500/380?The unit holds 6 × GN 1/3 pans with a maximum pan depth of 150mm. Pans are not included — they must be purchased separately. Do pans and pan covers need to be used?Yes — FED-X specifies that pans and pan covers must be used to ensure the unit maintains the correct operating temperature of +2 to +8°C. Operating without covers will affect temperature performance. What is the warranty on the XVRX1500/380?The unit comes with 2 Years Parts & Labour plus 2 Years Parts Only — 4 years total — provided you register the product within 14 days of your invoice date. What refrigerant does this unit use?The XVRX1500/380 uses R600A (isobutane), a low-GWP hydrocarbon refrigerant that is widely serviced across Australia. Can this unit operate in a hot kitchen environment?Yes — the XVRX1500/380 is rated to operate in ambient temperatures up to 38°C (60% relative humidity), making it suitable for typical commercial kitchen conditions.

Read more less

The FED-X XURF1410G2V is a two full glass door upright display freezer that keeps commercial inventory visible and accessible while maintaining consistent blast-freeze temperatures down to -18°C. With 945L net capacity across two independently sealed compartments, it is designed for supermarkets, food service operators, convenience stores, and hospitality venues that need high-volume frozen display at ambient temperatures up to 38°C. Why operators choose the XURF1410G2V 945L net capacity — 1480mm-wide double bay holds full product range without overcrowding or temperature recovery lag. Full glass doors with heated frames — maximises product visibility and prevents condensation on the door seals, reducing energy waste from warm air ingress. R290 natural refrigerant — ultra-low GWP (GWP=3), HFC- and CFC-free foam insulation, fully compliant with AU environmental requirements. Fan-forced Dixell-controlled cooling — uniform temperature distribution across all shelf levels; auto defrost cycle prevents ice build-up without operator intervention. Self-closing, lockable doors with heavy-duty magnetic seals — security-ready and energy-efficient; castors with front wheel brakes for safe repositioning on the floor. Specifications Brand FED-X Model / MPN XURF1410G2V Type Upright Display Freezer Capacity (Net) 945 L Capacity (Gross) 1410 L Doors 2 × full glass, hinged, self-closing, lockable Shelves 3 levels + base (accommodates 2 × GN 1/1 per shelf); max 40kg per shelf Temperature Range -15 to -18°C Ambient Temperature 38°C, 60% RH Cooling System Fan-forced Refrigerant R290 Controller Dixell Compressor Cubigel Power 240V; 50Hz; 10A; 865W Energy Consumption 10.33 kWh/24h Lighting Internal LED Construction Stainless steel interior and exterior with rounded corners External Dimensions 1480(W) x 860(D) x 2000(H)mm Internal Dimensions 1364(W) x 702(D) x 1401(H)mm Net Weight 232 kg Package Dimensions 1505(W) x 1480(D) x 2070(H)mm Country of Manufacture China Warranty 2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice) Venue suitability: The XURF1410G2V is ideal for supermarkets, convenience stores, service stations, food halls, cafes, and catering venues that need a visible frozen inventory display. The full glass doors make it suitable for high-traffic retail floors where impulse purchase and product clarity matter. Its 38°C ambient rating makes it suited to warm Australian kitchen and service environments. Explore the full range of Display Freezers or browse all FED-X refrigeration equipment available at Commercial Kitchen Store. Installation & delivery: The XURF1410G2V arrives on castors and requires a standard 10A single-phase 240V outlet. Ensure at least 100mm clearance at the rear and sides for condenser airflow. Dispatched Australia-wide. Frequently asked questions What is the difference between the gross and net capacity?The gross capacity (1410L) is the total internal volume; the net capacity (945L) is the usable storage volume after accounting for the evaporator, fans, and internal components. Plan stock levels around the 945L net figure. Is R290 refrigerant safe for commercial kitchens?Yes. R290 (propane) is a natural refrigerant with a global warming potential (GWP) of 3 — far lower than HFCs — and is widely used in commercial display equipment. Units are leak-tested and factory-charged; no special site permits are required for standard commercial installation. Can the shelves accommodate GN pans?Yes. Each shelf level is designed to hold two GN 1/1 pans side by side, with a maximum load of 40kg per shelf. The base also provides additional storage capacity. Does the unit require a dedicated circuit?The XURF1410G2V draws 10A at 240V (865W). A standard 10A single-phase outlet is sufficient; however, if the unit is part of a bank of refrigeration equipment, consult an electrician to ensure the circuit is not overloaded. What does the 4-year warranty cover?The warranty is 2 years parts and labour plus 2 years parts only, provided the product is registered within 14 days of invoice. Registration extends the standard 2-year cover to the full 4-year term. Contact the FED-X support team for warranty claims.

Read more less