Commercial refrigeration for Australian hospitality venues — every cold-side category in one department, spanning storage fridges, freezers, display and drinks cabinets, underbench and prep units, ice machines and blast chillers. If general-purpose cold storage is what you're after, go straight to our commercial fridges range — it's the largest category in the department. Otherwise, this page maps the whole range so you land on the right cabinet first time.
Who this refrigeration range is for
Almost every venue we supply buys from this department more than once. Cafés and restaurants run solid-door uprights in the back of house and glass-door merchandisers out front; pubs, clubs and bottle shops stack beverage cabinets behind the bar; bakeries and patisseries pair cake displays with underbench prep cabinets; caterers and ghost kitchens lean on freezers and rapid chilling to stretch prep across the week. Convenience stores and canteens are increasingly going self-service, with open-deck and glass-door grab-and-go cabinets doing the selling. Whatever the venue, the gear here is built for commercial duty cycles — heavy door traffic, hot kitchens, long trading hours — which is exactly where domestic units fall over.
What's in scope
Storage fridges
The back-of-house workhorses: solid-door upright cabinets in one-, two- and three-door formats, plus chef bases and drawer units that slot under cooking lines. Stainless construction and digital temperature controllers are standard across the serious end of the range.
Display and merchandising fridges
Cabinets that sell while they chill — glass-door upright drink and display fridges, cake and deli showcases, countertop displays and open-deck units for self-service aisles. Lighting, glass area and shelf merchandising matter as much as capacity here.
Underbench and prep refrigeration
Counter-height cold storage that doubles as bench space — under bench fridges in solid- and glass-door formats, plus pizza, salad and sandwich prep cabinets with refrigerated ingredient wells built into the worktop.
Freezers
Upright storage freezers, chest freezers, glass-door display freezers and ice cream cabinets all live in our commercial freezers range — from compact underbench units to multi-door uprights sized for high-volume frozen lines.
Bar, beverage and specialty
Behind-the-counter gear and the harder-to-find categories: bar fridges and backbar cabinets, wine fridges, ice makers from benchtop through modular, and blast chillers for venues cooling cooked food to HACCP timeframes.
How to choose commercial refrigeration in three steps
With this many categories, the fastest route to the right unit is to answer three questions in order.
Step 1 — Chiller, freezer or display?
Decide the job first. Holding stock cold out of sight is a storage chiller. Holding it frozen is a freezer. Selling chilled product to customers who choose by eye is a display unit — and that choice changes everything downstream, because display cabinets trade storage efficiency for glass and lighting.
Step 2 — Size to your peak stock
Capacity is quoted in litres. Work out how much product you need to hold between deliveries at your busiest week — not your average — and add headroom for airflow, since a cabinet packed solid can't circulate cold air. Two mid-size cabinets often beat one giant unit, splitting raw and ready-to-eat stock for food-safety separation.
Step 3 — Pick the format for the position
Match the cabinet to where it lives: upright for floor space, underbench where the unit doubles as a workbench, countertop where there's no floor left. Then check the practical fit — door swing and aisle clearance, ventilation gaps, the climate rating for hot kitchens, and whether the compressor runs off a standard 10-amp outlet (most cabinets in this range do).
The category covers all the powered cold-storage and cold-display equipment a food business runs: storage fridges and freezers, glass-door display and drinks cabinets, underbench and prep units, bar and backbar cabinets, ice machines and blast chillers. It's distinct from domestic refrigeration in build quality, compressor duty cycle and compliance with commercial food-safety requirements.
What's the difference between a storage fridge and a display fridge?
A storage fridge is built to hold stock efficiently — solid doors, deep shelves, better insulation and lower running costs. A display fridge is built to sell — glass doors or open decks, internal lighting and merchandising shelves, at the cost of higher energy use. Venues usually need both: storage cabinets in the kitchen, display cabinets where customers choose.
What temperature should commercial fridges and freezers hold?
Under Australian food-safety standards, potentially hazardous chilled food must be kept at 5°C or below, so chillers are typically set around 1–4°C to keep all zones of the cabinet compliant. Freezers should keep food hard frozen, with -18°C the common operating point. Commercial cabinets use digital controllers so you can verify and log temperatures for your food-safety program.
Can I use a domestic fridge in a commercial kitchen?
It's a false economy. Domestic units aren't designed for constant door openings, 24/7 operation or hot commercial kitchens, so they struggle to hold safe temperatures under load — a problem when your food-safety program depends on staying at 5°C or below. Commercial cabinets carry heavier compressors, faster temperature recovery and warranties that actually apply to business use.
What is a self-service fridge?
A self-service fridge is a display cabinet customers serve themselves from — either an open-deck unit with no doors, or a glass-door merchandiser. They're the standard fit for grab-and-go drinks, sandwiches and salads in convenience stores, canteens and café front counters. Open decks maximise impulse sales; glass-door units hold temperature more efficiently and cost less to run.
Do you deliver refrigeration equipment Australia-wide?
Yes. Commercial Kitchen Store delivers nationwide, including Melbourne, Sydney, Brisbane, Adelaide and Perth metro plus regional freight routes. Larger cabinets ship on a pallet to a ground-floor point, so check door and corridor clearances before ordering — or call our Australian-based team on 1300 111 901 and we'll help you size and spec the right unit.
The FED-X XSS7C18S3V is a three-door sandwich and salad prep counter designed for busy commercial kitchens that need refrigerated ingredient access and GN pan compatibility at the prep line. With 400L of net capacity and a top rail accommodating 8 x 1/3 GN pans up to 150mm deep, it keeps ingredients chilled and within reach during high-volume service.
Why operators choose the XSS7C18S3V
Integrated GN pan rail — holds 8 x 1/3 GN pans up to 150mm deep across the top, keeping sandwich and salad ingredients chilled and at eye level; 1 shelf per door below, GN 1/1 compatible.
Consistent +2 to +8°C across three compartments — Dixell digital controller with fan-forced Cubigel compressor maintains food-safe temperatures even in ambient conditions up to 43°C.
Tropicalised for Australian kitchens — rated to 43°C ambient at 60% RH, self-closing doors with heavy-duty magnetic seals, and R290 refrigerant in 60mm HFC/CFC-free foam insulation.
Stainless steel interior and exterior — rounded corners throughout for fast cleaning compliance; Ebm-papst evaporator and condenser fans, heavy-duty castors with front wheel brakes.
Display top holds temperature for up to 4 hours — pre-chilled environment keeps the top rail cold without power for short periods; useful during transport or power interruptions.
Specifications
Brand
FED-X
Model / MPN
XSS7C18S3V
Type
Sandwich / Salad Prep Bar Fridge
Net Capacity
400 L
Gross Capacity
417 L
Doors
3 × solid hinged, self-closing
GN Pan Rail (Top)
8 × 1/3 GN pans up to 150mm deep
Shelf per Door
1 × GN 1/1 compatible shelf per door
Temperature Range
+2 to +8°C
Ambient Temperature
43°C (60% RH)
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Cubigel
Controller
Dixell (digital)
Power
240V / 50Hz / 10A / 320W
External Dimensions
1795(W) × 700(D) × 1406(H)mm
Internal Dimensions
1234 × 580 × 564mm
Packed Dimensions
1830(W) × 730(D) × 1160(H)mm
Net Weight
130 kg
Weight Loading per Shelf
40 kg
Body Insulation
60mm HFC/CFC-free foam
Material
Stainless Steel
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Suited to cafes, sandwich shops, delis, hotel kitchens, catering operations, and any commercial venue where rapid sandwich or salad assembly demands chilled ingredient access at the prep line. Browse our full range of Salad Bar Fridges or explore the complete FED-X collection.
Installation & delivery: This unit ships on heavy-duty castors with front wheel brakes and can be positioned at any prep station. Ensure a 240V / 10A single-phase supply is available. Dispatched Australia-wide.
Frequently asked questions
What is the difference between the 400L net and 417L gross capacity?Gross capacity is the total interior volume before accounting for insulation thickness, shelving rails, and the GN pan top rail compartment. Net capacity (400L) is the usable refrigerated storage — always size on net figures for food storage planning.
How many GN pans does the top rail hold?The top rail holds 8 x 1/3 GN pans up to 150mm deep simultaneously. Each door section below includes one GN 1/1-compatible shelf for additional ingredient storage.
Can this unit handle a hot kitchen environment?Yes. The XSS7C18S3V is tropicalised and rated to operate in ambient temperatures up to 43°C at 60% relative humidity — suitable for Australian kitchen conditions year-round.
What refrigerant does the XSS7C18S3V use?It uses R290 (propane-based), a natural refrigerant with a very low global-warming potential. The unit body uses 60mm HFC/CFC-free foam insulation, making it compliant with Australian environmental standards.
What does the warranty cover and how do I register?The XSS7C18S3V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of invoice. Registration is required to activate the full term.
The FED-X XGNS1300B is a three-door undercounter workbench storage fridge that delivers consistent, reliable refrigeration at +2 to +8°C across 218 litres of net capacity. Built from stainless steel inside and out, it fits flush against any wall and serves as a worktop prep surface for busy commercial kitchens.Why operators choose the XGNS1300B
Generous net capacity — 218 L across three independent compartments keeps mise en place, dairy, and prep ingredients organised and accessible at the same time.
GN1/1 compatible — shelves and optional drawer runners accept standard gastronorm pans, so stock rotates straight from cool storage to service without re-plating.
Stainless steel throughout — interior and exterior in stainless steel with rounded internal corners simplify end-of-service cleaning and resist corrosion in humid kitchen environments.
Replaceable magnetic door seals — heavy-duty seals maintain optimal cooling efficiency and can be swapped in the field without specialist tools, reducing downtime.
Wall-huggable footprint — rear-venting design allows placement directly against a wall, maximising usable kitchen floor space without sacrificing access.
Specifications
Brand
FED-X
Model / MPN
XGNS1300B
Type
Undercounter Storage Fridge
Net Capacity
218 L
Gross Volume
368 L
Doors
3 × Hinged Solid Stainless Steel
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C at 60% RH
Cooling System
Static cooling
Refrigerant
R290
Compressor
Embraco/Secop
Controller
Dixell digital
GN Compatibility
GN 1/1
Weight Loading Per Shelf
40 kg
Electrical
240V / 240W / 1.6W standby
Energy Consumption
5 kWh/24h
Construction
Stainless Steel (interior & exterior), rounded internal corners
Product Dimensions
1368(W) × 700(D) × 897(H)mm
Internal Dimensions
1295 × 595 × 455mm
Packed Dimensions
1390(W) × 730(D) × 1050(H)mm
Net Weight
104 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Country of Manufacture
China
Venue suitability: The XGNS1300B suits restaurants, cafes, clubs, pubs, bars, and food-service operations that need accessible cold storage at counter height. Its compact footprint and worktop surface make it equally at home as a prep station in tight galley kitchens or behind a busy bar. Browse our full range of Under Bench Storage Fridges or explore more from FED-X.Installation & delivery: The XGNS1300B ships on castors and can be positioned against a wall immediately on delivery. No plumbing is required — plug into a standard 240V single-phase outlet. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XGNS1300B?The net usable capacity is 218 litres, distributed across three compartments. The gross volume is 368 litres; the difference accounts for insulation and structural material.What refrigerant does the XGNS1300B use?The unit uses R290 (propane), a natural hydrocarbon refrigerant with a very low global warming potential (GWP of 3), compliant with current Australian environmental standards.Can the unit be placed directly against a wall?Yes. The XGNS1300B is designed to be placed against the wall without any clearance gap at the rear, which is noted on the supplier's specification sheet.Is the XGNS1300B compatible with gastronorm pans?Yes. The interior accepts GN 1/1 shelves and optional GN 1/1 drawer runners, so standard gastronorm containers drop straight in without adaptors.What warranty does the XGNS1300B carry?FED-X provides 2 Years Parts & Labour plus a further 2 Years Parts Only, for a total of 4 years of warranty coverage, provided the unit is registered within 14 days of invoice.
The FED-X XGNS900B is a two-door undercounter storage fridge that delivers professional-grade commercial refrigeration in a compact 900mm-wide footprint. Engineered for restaurants, cafes, clubs, pubs, bars and commercial kitchens that need a reliable cold-storage worktop without sacrificing bench space.
Why operators choose the XGNS900B
Compact 900mm width — fits under standard bench heights and against the wall, maximising usable floor space in tight kitchens
180L net capacity with GN1/1 compatibility — stores full-size gastronorm pans on the shelf or via optional drawer slides for fast service-line access
Static cooling system — no fan noise or fan-driven moisture loss, keeping ingredients fresher for longer
Fulterer heavy-duty drawer runners & replaceable magnetic door seals — built for high-frequency opening in busy commercial environments
Stainless steel interior and exterior with rounded corners — meets commercial food safety standards and cleans quickly between service periods
Specifications
Brand
FED-X
Model / MPN
XGNS900B
Type
Undercounter Storage Fridge
Net Capacity
180 L
Gross Capacity
240 L
Number of Doors
2 (solid stainless steel)
GN Compatibility
GN 1/1 shelf or GN 1/1 drawer
Temperature Range
-2 to +8°C
Max Ambient Temperature
38°C, 60% RH
Cooling System
Static cooling
Refrigerant
R600A
Compressor
Embraco / Secop
Controller
Dixell digital
Max Shelf Load
40 kg per shelf
Internal Dimensions
830 x 595 x 455mm (W x D x H)
External Dimensions
903 x 700 x 897mm (W x D x H)
Packed Dimensions
930 x 730 x 1050mm (W x D x H)
Net Weight
85 kg
Construction
Stainless steel interior and exterior
Power
240V / 50Hz / 170W / 1.2A
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with registration within 14 days of invoice)
Venue suitability: The XGNS900B is suited to high-turnover venues requiring accessible cold storage directly at the work surface — ideal for restaurant prep lines, cafe service counters, club bars, pub under-bar setups, bakeries and commercial catering operations. Its wall-flush design makes it a practical choice where floor footprint is at a premium.
Explore our full range of Under Bench Storage Fridges or browse all FED-X commercial refrigeration to find the right configuration for your kitchen.
Installation & delivery: The XGNS900B arrives fully assembled on heavy-duty castors. Position on a level surface with adequate ventilation clearance. Unit can be placed flush against the wall. Dispatched Australia-wide.
Frequently asked questions
What is the net capacity of the XGNS900B?The XGNS900B has a net usable capacity of 180 litres. The gross volume (total internal volume) is 240 litres.
Is the XGNS900B GN pan compatible?Yes. The storage compartment accepts GN 1/1 pans on the standard shelf. Optional additional slides allow GN 1/1 drawers to slide in and out for faster service access.
What refrigerant does the XGNS900B use?The XGNS900B uses R600A (isobutane), a low-GWP refrigerant that offers high energy efficiency and is compatible with current Australian regulations.
Can the unit be placed against a wall?Yes. The XGNS900B is designed so that it can be placed flush against the wall without requiring rear clearance for the condenser.
What is the warranty on the XGNS900B?The XGNS900B carries 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty — a total of up to 4 years coverage — when the product is registered within 14 days of invoice.
The FED-X XGNS900-4D is a four-drawer compact workbench fridge that keeps ingredients at safe temperatures and within arm's reach of your prep team — without sacrificing worktop space above.
Why operators choose the XGNS900-4D
Full front-to-back access — Fulterer heavy-duty drawer runners let you grab items from the back without crouching or moving other stock.
Ergonomic drawer design — no kneeling required; drawers pull smoothly to working height every time.
Stainless steel inside and out — rounded internal corners make cleaning fast, even at the end of a long service.
Wall placement ready — rear-venting compressor means the unit can sit flush against the wall, maximising your kitchen footprint.
Precision Dixell controller — digital temperature management keeps the cabinet steady across its -2 to +8°C operating range.
Specifications
Brand
FED-X
Model / MPN
XGNS900-4D
Type
Drawer Fridge
Net Capacity
220 L
Number of Drawers
4
Temperature Range
-2 to +8°C
Ambient Temperature
32°C / RH 60%
Refrigerant
R600A
Compressor
Embraco/Secop
Controller
Dixell
External Dimensions
903(W) x 700(D) x 897(H)mm
Internal Dimensions
830(W) x 595(D) x 455(H)mm
Power Supply
240V / 170W / 1.2A
Power Type
Electric
Construction
Stainless Steel (interior & exterior)
Country of Manufacture
China
Packed Dimensions
930(W) x 730(D) x 1050(H)mm
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days)
Venue suitability: The XGNS900-4D suits busy commercial kitchens where rapid ingredient access matters — cafes, restaurants, bakeries, pizza operations, and sandwich bars. The four-drawer layout is especially effective where multiple chefs work the same section simultaneously. Browse our full range of Drawer Fridges or explore more FED-X refrigeration.
Installation & delivery: Standard 10A single-phase outlet required. The unit rolls on heavy-duty castors and can be positioned against the wall. Dispatched Australia-wide.
Frequently asked questions
What is the net capacity of the XGNS900-4D?The net usable capacity is 220 litres across the four drawers.
What refrigerant does this unit use?The XGNS900-4D uses R600A refrigerant.
Can the drawers hold GN 1/1 containers?Yes — each drawer is sized for GN 1/1 pans, making it compatible with standard gastronorm prep systems.
What power supply is needed?The unit requires a standard 240V / 10A single-phase outlet and draws 170W.
What does the warranty cover?The XGNS900-4D comes with 2 years parts and labour, plus an additional 2 years parts-only coverage when you register the product within 14 days of invoice.
The FED-X XGNS1300-6D is a six-drawer compact workbench fridge that keeps fresh ingredients within arm's reach on the prep line. The worktop doubles as a clean preparation surface, making it ideal for kitchens where bench space and cold storage need to share a single footprint.
Why operators choose the XGNS1300-6D
Six full-depth drawers — access product front-to-back without crouching, speeding up high-volume service.
Fulterer heavy-duty drawer runners — rated for commercial use; drawers glide smoothly even fully loaded with GN pans.
R290 refrigerant — low global-warming-potential refrigerant with Embraco/Secop compressor and Dixell digital controller for precise temperature management.
Stainless steel inside and out — rounded interior corners for fast, compliant cleaning between service periods.
Wall-flush design — rear ventilation allows the unit to sit flush against the wall, preserving valuable kitchen floor space.
Specifications
Brand
FED-X
Model / MPN
XGNS1300-6D
Type
Six-Drawer Compact Workbench Fridge
Capacity
368 L (gross) / 218 L (net)
Drawer Count
6
Temperature Range
+2 to +8°C
Ambient Temperature
38°C, 60% RH
Cooling System
Static cooling
Refrigerant
R290
Compressor
Embraco / Secop
Controller
Dixell (digital)
Power
240V / 240W / 1.6A
Energy Consumption
5 kWh / 24h
Construction
Stainless Steel interior & exterior, rounded corners
Internal Dimensions
1295 x 595 x 455mm (W x D x H)
Product Dimensions
1368(W) x 700(D) x 897(H)mm
Packed Dimensions
1390(W) x 730(D) x 1050(H)mm
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Suited to cafes, restaurants, pubs, bakeries, pizza kitchens, and any commercial kitchen requiring rapid access to chilled ingredients at the prep station. Explore our full range of Drawer Fridges or shop all FED-X refrigeration equipment.
Installation & delivery: Requires a 240V/10A single-phase outlet. Unit can be positioned flush against the wall. Heavy-duty castors allow repositioning. Dispatched Australia-wide.
Frequently asked questions
What is the capacity of the XGNS1300-6D?The XGNS1300-6D has a gross volume of 368 L and a net (usable) volume of 218 L, split across six full-depth drawers.
What refrigerant does this unit use?The XGNS1300-6D uses R290 refrigerant, a natural hydrocarbon with very low global warming potential, paired with an Embraco or Secop compressor.
Can the unit be placed against the wall?Yes. The rear ventilation design allows the XGNS1300-6D to sit flush against a wall without impeding airflow.
What GN pans fit in each drawer?Each drawer accommodates GN 1/1 pans, making it compatible with standard commercial kitchen gastronorm equipment.
What warranty does the XGNS1300-6D carry?The unit comes with 2 Years Parts & Labour plus an additional 2 Years Parts Only coverage, provided the product is registered within 14 days of invoice — 4 years total warranty when registered.
The FED-X XGNS1300D is a three-door commercial salad prep fridge designed for high-volume food preparation in professional kitchens. With a 218 L net capacity and a stainless steel hinged lid opening to 8 × GN1/6 pan slots, it keeps ingredients chilled and accessible at the pass.Why operators choose the XGNS1300D
GN-compatible top rail — 8 × GN1/6 pan slots under a hinged stainless steel lid for instant access to garnishes, sauces, and toppings.
Fan-assisted cooling — Dixell digital controller with Embraco/Secop compressor holds a stable +2 to +8°C operating range.
R290 natural refrigerant — low global-warming-potential gas, meeting current environmental standards.
Rounded stainless steel interior — coved corners on all edges make cleaning fast between services; one GN1/1 shelf per door.
Heavy-duty castors — fully mobile; unit can be placed against the wall with rear clearance.
Specifications
Brand
FED-X
Model / MPN
XGNS1300D
Type
Salad/Noodle/Sandwich Prep Bar Fridge
Net Capacity
218 L
Gross Volume
368 L
GN Pan Slots (top)
8 × GN1/6
Shelves
1 × GN1/1 per door
Doors
3 × Hinged Doors
Temperature Range
+2 to +8°C
Max Ambient Temperature
32°C, 60% RH
Refrigerant
R290
Cooling System
Fan-assisted
Compressor
Embraco/Secop
Controller
Dixell (digital)
Power
240V, 240W / 1.6A
Construction
Stainless Steel interior & exterior
Internal Dimensions
1295 × 595 × 455mm
Product Dimensions (W × D × H)
1368 × 700 × 1020mm
Packed Dimensions (W × D × H)
1390 × 730 × 1160mm
Net Weight
104 kg (supplier) / 130 kg (store — verify)
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for restaurants, cafes, pubs, clubs, bars, and pizza shops that need fast topping access at the prep or service line. Browse our full range of Salad Bar Fridges or explore all FED-X refrigeration for complementary units.Installation & delivery: Requires a single-phase 240V/10A GPO. Unit can be positioned against the wall. Allow rear and side airflow clearance as directed in the installation guide. Dispatched Australia-wide.Frequently asked questionsWhat is the net capacity of the XGNS1300D?The XGNS1300D has a net capacity of 218 L across its three compartments. The gross volume is 368 L.Does the XGNS1300D use natural refrigerant?Yes — it uses R290, a natural hydrocarbon refrigerant with a low global warming potential (GWP of 3), compliant with current Australian standards.How many GN pans does the top rail hold?The hinged stainless steel lid opens to eight GN1/6 pan slots. Pans and pan covers are not included and must be sourced separately. Pan covers must be in place during operation to maintain the correct temperature.Can the XGNS1300D be placed against a wall?Yes — the unit is designed to sit flush against the wall. The compressor exhausts appropriately for this configuration; refer to the installation guide for exact clearance requirements.What warranty does the FED-X XGNS1300D carry?The XGNS1300D is covered by 2 years parts and labour plus a further 2 years parts-only coverage — 4 years total — when registered within 14 days of invoice.
The FED-X XGNS900E is a two-door refrigerated sandwich and salad prep fridge designed for small to medium commercial kitchens that need reliable cold storage with an integrated ingredient trough. The granite worktop holds 5 x 1/6th GN pans in an open refrigerated rail, keeping garnishes, toppings, and condiments within arm's reach of the prep line.Why operators choose the XGNS900E
Integrated GN pan trough — 5 x 1/6th GN pan positions in the refrigerated top keep ingredients cold and accessible during service
Fan-assisted cooling — consistent +2 to +8°C temperature throughout the 180L net chamber, driven by an Embraco/Secop compressor and Dixell digital controller
Full stainless steel construction — interior and exterior in stainless steel with rounded internal corners for fast, thorough cleaning between services
Granite worktop — hygienic, easy-to-clean granite prep surface alongside the pan trough; can be placed against the wall
Heavy-duty magnetic door seals — replaceable seals maintain an airtight closure on both hinged doors; heavy-duty castors for repositioning
Specifications
Brand
FED-X
Model / MPN
XGNS900E
Type
Salad / Sandwich Prep Fridge
Doors
2
Door Type
Hinged
Gross Capacity
240 L
Net Capacity
180 L
GN Pan Capacity (top)
5 x 1/6th GN pans
GN Compatibility (lower)
1 x GN 1/1 shelf per door
Temperature Range
+2 to +8°C
Max Ambient Temperature
38°C, 60% RH
Cooling System
Fan-assisted
Refrigerant
R600A
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V / 170W / 1.2A
Construction
Stainless Steel (interior & exterior)
Weight Loading per Shelf
40 kg
Net Weight
106 kg
Product Dimensions (W x D x H)
903 x 700 x 1107 mm
Internal Dimensions (W x D x H)
830 x 595 x 455 mm
Packed Dimensions (W x D x H)
930 x 730 x 1260 mm
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: The XGNS900E suits restaurants, cafes, pizza shops, sandwich bars, clubs, and pubs where cold ingredient access during service is essential. Its compact 903 mm width fits tight prep lines. Browse all Salad Bar Fridges or explore the full range of FED-X commercial refrigeration.Installation & delivery: No plumbing required — plug-in 240V single phase. Unit can be placed against the wall. Pans and lids are not included; pan and pan cover must be used to ensure correct operating temperature. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XGNS900E?The lower cabinet has a net volume of 180L, with a gross volume of 240L. Each door section holds 1 x GN 1/1 compatible shelf.How many GN pans fit in the refrigerated top?The open-top refrigerated rail holds 5 x 1/6th GN pans. Pans and lids are not included with the unit and must be purchased separately.What refrigerant does the XGNS900E use?It uses R600A refrigerant, with an Embraco/Secop compressor and Dixell digital temperature controller.What is the operating temperature range?The unit operates at +2 to +8°C and is rated for a maximum ambient temperature of 38°C at 60% relative humidity.What warranty is included?The XGNS900E comes with 2 Years Parts & Labour plus 2 Years Parts Only, provided you register the product within 14 days of invoice date.
FED-X Four Glass Door Bench Fridge - XUB7C22G4V This commercial freezer is perfect if you’re running a busy business and looking for reliability and performance. Ideal choice for restaurants, cafe’s, fast food operations, butcheries and convenience stores. With fan-forced cooling that ensures even distribution of the cool air there will be no warm spots and your food will be safe. This unit is designed for you to be able to maximize the internal space. You can place it under an existing counter or place it against the wall. Equipped with heavy-duty castors, ( brake type at the front) you can easily move the unit out for cleaning or maintenance. Constructed with stainless steel interior and exterior, your unit is easy-to-clean and is made strong to withstand the rigors of a busy operation. This unit has 4 see through self closing glass doors allowing you to find, choose and pick what you need as well as do inventory with much ease. All doors are self-closing and fitted with heavy-duty magnetic seals to retain foods' optimal quality. You can set your ideal temperature with its user-friendly digital control. This unit is GN compatible, comes with a single shelf We can provide Splashback tops as well as a 2 and 3 solid drawer option in lieu of a door which is available upon request. This underbench fridge’s build quality, specifications and functionality meet food, health, and safety standards. *Due to it’s design, this unit can be placed against the wall. *Tropicalised for Australian conditions. Net Capacity: 553L
Temperature range: -2 ~ +8°C & Ambient Temperature: 35°C & RH: 60%
Cooling System: Fan forced cooling Compressor: Embraco/Secop Controller: Dixell Weight loading per shelf: 40kg Refrigerant: R290 Dimensions (Internal): 1669mm W x 580mm D x 564mm H MAIN FEATURES Stainless steel interior and exterior with rounded corners for easy cleaning 1 shelf per door, GN1/1 pan compatible Self-closing doors with heavy duty magnetic door seals 60mm HFCs and CFCs free foam body insulation Tropicalised for Australian conditions User friendly Digital controls Rapid recovery rate Ebm-papst evaporator and condenser fans Heavy duty castors with front wheel brakes Unit can be placed against the wall LED Lighting Inside 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 335W
Specifications
Capacity: 553L
Width: 2230mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XUB7F18S3V is a three-door underbench storage freezer designed for commercial kitchens that need reliable below-zero storage at bench height. With 311 L of net capacity across three independently sealed compartments, it maintains a consistent -18 to -22°C and is tropicalised for Australian ambient conditions up to 43°C.
Why operators choose the XUB7F18S3V
True underbench design with integrated worktop — 850mm height fits beneath standard bench counters, adding frozen storage exactly where it is needed on the cookline or prep area without consuming additional floor space.
Fan-forced cooling with Dixell digital controller — Embraco/Secop compressor maintains temperature across all three compartments, with rapid recovery after door openings and a user-friendly single-degree adjustment.
Three independent solid hinged doors — each fitted with heavy-duty magnetic seals and self-closing hinges; one GN1/1-compatible shelf per door included, with additional shelf sets available.
R290 refrigerant in 60mm foam-insulated body — low global-warming-potential refrigerant in a HFC- and CFC-free insulated cabinet; meets current AU environmental requirements.
Stainless steel interior and exterior with rounded corners — Ebm-papst evaporator and condenser fans; heavy-duty castors with front-wheel brakes; unit can be placed flush against a wall.
Specifications
Brand
FED-X
Model / MPN
XUB7F18S3V
Type
Underbench Freezer
Net Capacity
311 L
Gross Capacity
417 L
Doors
3 × solid hinged
Temperature Range
-18 to -22°C
Ambient Temperature
43°C (60% RH)
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Embraco/Secop
Controller
Dixell (digital)
Power
240V / 560W / 3.4A
Energy Consumption
9.072 kWh/24h
External Dimensions
1795(W) × 700(D) × 850(H)mm
Internal Dimensions
1234 × 580 × 564mm
Packed Dimensions
1825(W) × 730(D) × 910(H)mm
Net Weight
146 kg
Weight Loading per Shelf
40 kg
Material
Stainless Steel
Included Accessories
1 shelf per door (GN1/1 compatible; additional shelf sets available)
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Suited to commercial kitchens, restaurant prep lines, hotel back-of-house, catering operations, butcheries, fast-food businesses, and convenience stores that need reliable underbench frozen storage. Browse our full range of Under Bench Freezers or explore the complete FED-X collection.
Installation & delivery: Ships on its own heavy-duty castors with front-wheel brakes. Ensure a 240V / 10A single-phase supply is available. The unit can be placed flush against a wall. Dispatched Australia-wide.
Frequently asked questions
What is the difference between 311 L net and 417 L gross capacity?Gross capacity is the total interior volume before accounting for insulation, shelving rails, and compartment structure. Net capacity (311 L) is the usable storage space available for food product — always compare net figures when sizing against your storage needs.
Can this unit be placed flush against a wall?Yes. The XUB7F18S3V is designed for wall-flush placement — the condenser is positioned at the front, so no rear clearance gap is required. Heavy-duty front-wheel-brake castors also allow you to lock it in position.
How many shelves are included and can I add more?One GN1/1-compatible shelf per door is included (three shelves total), each rated to 40 kg. Additional shelf sets are available; optional 2- and 3-drawer configurations are also available in lieu of solid doors — contact our team for details.
What refrigerant does the XUB7F18S3V use?It uses R290, a natural refrigerant with a very low global-warming potential. The unit contains no HFCs or CFCs and uses 60mm foam body insulation compliant with current Australian environmental standards.
What does the warranty cover and how do I register?The XUB7F18S3V carries 2 Years Parts & Labour plus an additional 2 Years Parts Only — 48 months total — when the unit is registered within 14 days of the invoice date.
The FED-X XUB7F13S2V is a 2-door solid-door underbench freezer designed for high-output commercial kitchens that need reliable sub-zero storage directly at the prep line. Running on the eco-friendly R290 refrigerant and fan-forced cooling, it holds a net 186 L across two independent compartments and maintains temperatures between -18°C and -22°C even in ambient kitchen conditions up to 38°C.Why operators choose the XUB7F13S2V
Prep-line convenience — underbench form factor positions frozen stock exactly where it is needed, cutting transit time and reducing service disruption.
Stable temperature in hot kitchens — tropicalised design rated to 38°C ambient with Dixell digital controller for precise set-and-forget temperature management.
GN1/1 pan compatibility — one shelf per door accommodates full-size gastronorm pans with 40 kg load rating per shelf, so no pan adapters or rearranging.
Low-maintenance construction — stainless steel interior and exterior with rounded corners, self-closing doors with heavy-duty magnetic seals, and HFC/CFC-free foam insulation throughout.
4-year warranty coverage — 2 years parts and labour plus 2 years parts only when registered within 14 days of invoice, backed by FED nationwide stock in four states.
Specifications
Brand
FED-X
Model / MPN
XUB7F13S2V
Type
Underbench Freezer
Net Capacity
186 L
Gross Capacity
282 L
Doors
2 solid hinged
Shelves
1 per door (GN1/1 compatible, 40 kg load per shelf)
Temperature Range
-18°C to -22°C
Ambient Temperature Rating
38°C, 60% RH
Refrigerant
R290
Cooling System
Fan-forced (EBM-PAPST evaporator and condenser fans)
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V; 520W / 3.2A
Energy Consumption
7.81 kWh/24h
Construction
Stainless steel interior and exterior, rounded corners
Insulation
60mm HFC/CFC-free foam
Door Seals
Self-closing with heavy-duty magnetic seals
Mobility
Heavy-duty castors with front wheel brakes
Internal Dimensions
799 x 580 x 564mm
External Dimensions (W x D x H)
1360 x 700 x 850mm
Packing Dimensions (W x D x H)
1390 x 730 x 910mm
Net Weight
107 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: The XUB7F13S2V suits commercial kitchens where frozen ingredient storage needs to sit directly within the prep zone — ideal for restaurants, cafes, hotels, catering operations, and institutional kitchens running continuous service. The underbench height integrates cleanly under standard work surfaces without interrupting bench space.Browse the full range of Under Bench Freezers or explore more products from FED-X available at Commercial Kitchen Store.Installation & delivery: This unit arrives fully assembled on castors and requires only a standard 10A 240V power point. Allow adequate clearance at the rear and sides for ventilation. Dispatched Australia-wide.Frequently asked questionsWhat is the difference between net capacity (186 L) and gross capacity (282 L)?Gross capacity is the total interior volume before insulation walls and shelving. Net (usable) capacity — 186 L — is the space actually available to store product. Always compare net figures across units.Is the XUB7F13S2V suitable for a kitchen that gets hot in summer?Yes. The unit is tropicalised and rated to operate in ambient temperatures up to 38°C at 60% relative humidity, which covers most Australian commercial kitchen environments.What refrigerant does this freezer use?R290 (propane) — a natural, low-GWP refrigerant with no ozone depletion potential and lower environmental impact than synthetic HFC refrigerants.Can I use full-size GN1/1 pans directly in this unit?Yes. Each door includes one shelf rated to 40 kg and dimensioned for GN1/1 pans without adapters.What does the warranty cover and how do I activate it?The warranty provides 2 years parts and labour plus a further 2 years parts only, totalling 4 years coverage. To activate the full 4-year term, the unit must be registered within 14 days of the invoice date.
The FED-X XUB7C18G3V is a 311L three-glass-door underbench refrigerator designed for high-throughput commercial kitchens where stock visibility and rapid access are essential. Running on eco-friendly R290 refrigerant with a Dixell digital controller and Ebm-papst fan-forced cooling, this 700-series unit keeps contents at a stable -2 to +8°C across all three chambers, making it equally at home under a prep counter or bar top.
Why operators choose the XUB7C18G3V
Full-view glass doors — see and select stock without opening, reducing cold-air loss during peak service
GN1/1 pan compatibility — one shelf per door slides in standard gastronorm pans for seamless prep integration
Fan-forced even cooling — Ebm-papst evaporator and condenser fans eliminate warm spots; rapid temperature recovery after door openings
Self-closing doors with heavy-duty magnetic seals — maintains food safety without staff intervention
Heavy-duty castors with front brakes — rolls out for cleaning or repositioning; can be placed flush against the wall
Specifications
Brand
FED-X
Model / MPN
XUB7C18G3V
Type
Undercounter Glass Door Fridge
Net Capacity
311 L
Gross Capacity
417 L
Doors
3 × Hinged Glass Doors
Temperature Range
-2 to +8°C
Max Ambient Temperature
35°C / 60% RH (tropicalised for AU conditions)
Refrigerant
R290
Cooling System
Fan-forced cooling
Compressor
Embraco/Secop
Controller
Dixell digital
Fans
Ebm-papst evaporator & condenser
Insulation
60mm HFC/CFC-free foam body
Shelves
1 per door, GN1/1 compatible, 40 kg load each
Internal Dimensions
1234 x 580 x 564mm
Product Dimensions (W × D × H)
1795 × 700 × 850mm
Packed Dimensions (W × D × H)
1825 × 730 × 910mm
Net Weight
134 kg
Power Supply
240V; 50Hz; 1.3A; 230W
Energy Consumption
3.577 kWh/24h
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Venue suitability: Ideal for restaurants, cafes, fast-food operations, butcheries, and convenience stores that need quick visual stock access and reliable temperature holding under a prep counter or bar. Browse our full range of Under Bench Fridges or explore more from FED-X commercial refrigeration.
Installation & delivery: No gas connection required — plugs into a standard 10A GPO. Can be positioned against the wall (rear-exhaust design). Dispatched Australia-wide.
Frequently asked questions
What is the net capacity of the XUB7C18G3V?The net usable capacity is 311 litres (gross volume is 417L). Each of the three sections holds one GN1/1-compatible shelf rated to 40 kg.
What refrigerant does this unit use?The XUB7C18G3V uses R290 (propane), a low-GWP natural refrigerant that meets current Australian environmental standards.
What temperature range does it operate at?The unit is designed to hold -2 to +8°C, suitable for chilled food storage, and is tropicalised for Australian ambient conditions up to 35°C / 60% RH.
What warranty is included?The XUB7C18G3V comes with 2 Years Parts & Labour plus a further 2 Years Parts Only — 4 years total — when registered within 14 days of invoice.
Can the unit be placed against a wall?Yes — the FED-X 700-series is designed for wall placement. The condenser/fan system does not require rear clearance, and the heavy-duty castors allow it to be rolled out for maintenance when needed.
The FED-X XUB7C13G2V is a two-section underbench glass door refrigerator designed for high-throughput commercial kitchens that need easy ingredient access and consistent cold-chain performance without sacrificing bench space.Why operators choose the XUB7C13G2V
Fan-forced cooling — Ebm-papst evaporator and condenser fans circulate cold air evenly, eliminating warm spots and keeping food safe at every shelf level.
See-through glass doors — Staff can identify and retrieve ingredients without breaking the cold chain, reducing door-open time during service.
R290 refrigerant — Low global-warming-potential refrigerant tropicalised for Australian conditions, rated to a 43°C ambient environment.
Full stainless steel construction — Interior and exterior stainless with rounded corners for fast, compliant cleaning between service periods.
Heavy-duty castors with front-wheel brakes — Unit can be positioned against the wall or rolled out for maintenance; suits any kitchen layout.
Specifications
Brand
FED-X
Model / MPN
XUB7C13G2V
Type
Underbench Glass Door Refrigerator
Capacity (Gross)
282 L
Capacity (Net)
207.5 L
Doors
2
Door Type
Hinged Glass
Refrigerant
R290
Temperature Range
-2 to +8°C
Ambient Temperature Rating
43°C, 60% RH
Cooling System
Fan-forced
Compressor
Embraco/Secop
Controller
Dixell digital
Power
240V; 215W / 1.3A
Lighting
LED
Shelf Load Capacity
40 kg per shelf
Shelves Included
1 shelf per door (GN 1/1 compatible)
External Dimensions (W × D × H)
1360 × 700 × 850 mm
Internal Dimensions (W × D × H)
799 × 580 × 564 mm
Packed Dimensions (W × D × H)
1390 × 730 × 910 mm
Net Weight
108 kg
Packed Weight
144 kg
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Suited to cafes, restaurants, fast-food operations, butcheries, and convenience stores where bench space is premium and quick visual stock-checking is essential during service. The 700-series depth (700 mm) fits under most standard bench heights.Pair this unit with our full range of Under Bench Fridges or explore the complete FED-X commercial refrigeration range for matching equipment.Installation & delivery: No gas connection required — single-phase 240V plug-in. Heavy-duty front-wheel brakes allow safe repositioning once placed. Dispatched Australia-wide.Frequently asked questionsWhat refrigerant does the XUB7C13G2V use?The XUB7C13G2V uses R290 (propane), a natural refrigerant with a low global-warming potential that is fully compliant with Australian environmental standards.What is the internal temperature range?The unit operates between -2°C and +8°C, making it suitable for dairy, fresh produce, beverages, and prepared foods.Is the unit GN-compatible?Yes — each door section includes one GN 1/1 compatible shelf, and the interior is sized to accept standard gastronorm pans.Can the fridge be placed against a wall?Yes. The compressor and condenser are positioned on the right side of the unit, so the rear can sit flush against a wall without restricting airflow.What warranty applies?The XUB7C13G2V carries a 2-year parts-and-labour warranty plus a further 2 years parts-only warranty when the product is registered within 14 days of invoice — 4 years total protection.
FED-X Stainless Steel Four Door Bench Fridge - XUB7C22S4V Net Capacity: 553L Cooling System: Fan forced cooling Temperature range: -2~+8°C Compressor: Embraco/Secop Controller: Dixell Ambrient Temperature: 43°C RH: 40% Stainless steel interior and exterior with rounded corners for easy cleaning 1 shelf per door, GN1/1 pan compatible Self-closing doors with heavy duty magnetic door seals 60mm HFCs and CFCs free foam body insulation Tropicalised for Australian conditions User friendly Digital controls Rapid recovery rate Optional 2 and 3 drawer units available in lieu of doors Ebm-papst evaporator and condenser fans Heavy duty castors with front wheel brakes Unit can be placed against the wall Weight loading per shelf: 40kg Refrigerant: R290 Dimensions (Internal): 1669mm W x 580mm D x 564mm H 2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of InvoicePower: 240V; 50V; 10A; 335W
Specifications
Capacity: 553L
Width: 2230mm
Finish: Stainless Steel
Depth: 700mm
The FED-X XUB7C18S3V is a 3-door solid-door underbench storage fridge built for high-volume commercial kitchens that need reliable low-profile refrigeration with a full 1795mm worktop footprint. Fan-forced cooling, a Dixell digital controller, and tropicalisation for Australian ambient conditions up to 43°C make it a workhorse for prep stations, pass-throughs, and production lines.
Why operators choose the XUB7C18S3V
417 L gross capacity across three doors — each section independently accessible, minimising temperature loss during service
Fan-forced cooling with Embraco/Secop compressor — rapid recovery rate maintains consistent -2 to +8°C even under heavy door-opening cycles
GN1/1 pan-compatible shelves — 1 shelf per section (40 kg capacity each), fits standard gastronorm pans without adapters
Self-closing doors with heavy-duty magnetic seals — prevents accidental temperature drift; stainless interior and exterior with rounded corners for easy cleaning
Tropicalised for Australian conditions — rated to 43°C ambient; 60mm HFC/CFC-free foam insulation and R290 natural refrigerant
Specifications
Brand
FED-X
Model / MPN
XUB7C18S3V
Type
Undercounter Storage Fridge
Capacity
417 L (gross)
Temperature Range
-2 to +8°C
Refrigerant
R290
Cooling System
Fan forced
Compressor
Embraco/Secop
Controller
Dixell digital
Ambient Temperature Rating
43°C
Doors
3 solid hinged, self-closing
Shelves
1 per door (GN1/1 compatible, 40 kg capacity each)
Internal Dimensions
1234 x 580 x 564mm
External Dimensions
1795(W) x 700(D) x 850(H)mm
Packed Dimensions
1825(W) x 730(D) x 910(H)mm
Net Weight
121 kg
Insulation
60mm HFC/CFC-free foam
Power
240V; 50Hz; 10A; 235W
Construction
Stainless steel interior & exterior
Mobility
Heavy-duty castors with front wheel brakes
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: Ideal for restaurants, cafes, hotel kitchens, catering operations, and food-production facilities that need high-capacity underbench refrigeration at a prep or pass-through station. The 1795mm worktop doubles as prep surface. Suitable for tropical and high-ambient environments. Browse our full range of Under Bench Fridges or explore more FED-X refrigeration equipment.
Installation & delivery: The XUB7C18S3V ships pre-assembled on castors — position, plug into a standard 10A GPO, and it is operational. Unit can be placed directly against a wall (rear condenser clearance not required). Dispatched Australia-wide.
Frequently asked questions
What is the net usable capacity of the XUB7C18S3V?The gross volume is 417 L across three sections. The usable (net) capacity is 311 L as measured per Australian convention.
What refrigerant does the XUB7C18S3V use?It uses R290 (propane), a natural refrigerant with very low global-warming potential and zero ozone-depletion potential — compliant with current and anticipated Australian regulations.
Can I store GN1/1 pans directly on the shelves?Yes. Each of the three sections includes one GN1/1-compatible shelf rated to 40 kg. Full-size gastronorm pans slide straight in without adapters or additional rack conversions.
Is the unit suitable for a Queensland or Northern Territory kitchen?Yes. The XUB7C18S3V is tropicalised for Australian conditions with an ambient temperature rating of 43°C, making it suitable for hot and humid kitchens found in tropical climates.
What is the warranty on the XUB7C18S3V?FED-X provides 2 Years Parts & Labour plus a further 2 Years Parts Only, giving 4 years total coverage — provided the unit is registered within 14 days of invoice date.
The FED-X XUB7C13S2V is a two-door underbench storage fridge designed for high-output commercial kitchens that need reliable cold storage beneath the prep bench. Built to the 700-series specification, it delivers consistent -2 to +8°C performance with fan-forced dry cooling, a Dixell digital controller, and an Embraco/Secop compressor — all in a full stainless steel cabinet that handles the heat of a tropicalised Australian kitchen environment.
Why operators choose the XUB7C13S2V
Tropicalised for AU conditions — rated to 43°C ambient temperature with 60% RH, engineered for the heat of an Australian commercial kitchen without performance drop.
GN1/1 pan compatible shelving — one removable shelf per section supports up to 40 kg and lines up directly with standard prep pans, cutting transfer time during service.
Self-closing doors with heavy-duty magnetic seals — minimises temperature fluctuation in busy service environments where doors are opened frequently.
R290 natural refrigerant — low global-warming-potential refrigerant, HFC and CFC free, with 60mm foam body insulation for efficient energy use (2.623 kWh/24h).
Heavy-duty castors with front-wheel brakes — unit can be positioned flush against the wall, with rear ventilation clearance built in for flexible kitchen layout.
Specifications
Brand
FED-X
Model / MPN
XUB7C13S2V
Type
Undercounter Storage Fridge
Gross Volume
282 L
Net Volume
186 L
Temperature Range
-2 to +8°C
Refrigerant
R290
Cooling System
Fan-forced dry cooling
Compressor
Embraco/Secop
Controller
Dixell digital
Doors
2 solid hinged doors
Shelving
1 shelf per door, GN1/1 compatible, 40 kg load capacity
Ambient Temperature Rating
43°C, 60% RH
Power
240V; 215W / 1.3A
Energy Consumption
2.623 kWh/24h
External Dimensions
1360(W) x 700(D) x 850(H)mm
Internal Dimensions
799(W) x 580(D) x 564(H)mm
Packed Dimensions
1390(W) x 730(D) x 910(H)mm
Net Weight
102 kg (supplier confirmed; store lists 119 kg — verify)
Construction
Stainless steel interior and exterior, rounded corners
Insulation
60mm HFC/CFC-free foam body insulation
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (registration within 14 days of invoice required)
Venue suitability: Suited to cafes, restaurants, hotel kitchens, club canteens, and any venue requiring underbench refrigeration in a high-ambient-temperature environment. The 1360mm width accommodates two standard prep sections side by side. Explore the full Under Bench Fridges range for companion models, or browse all FED-X refrigeration to match across your cold-chain.
Installation & delivery: This unit ships on castors and can be placed against the wall. Allow standard electrical clearance (240V/10A single phase). Dispatched Australia-wide from FED warehouses in Sydney, Melbourne, Brisbane, Adelaide, and Perth.
Frequently asked questions
What is the difference between gross and net volume on this fridge?The gross volume of 282 L is the total cabinet space. The net usable volume — the space available for food storage accounting for the cooling system components — is 186 L. Plan your storage around the 186 L net figure.
Is the XUB7C13S2V suitable for a hot kitchen environment?Yes. The unit is tropicalised and rated to a maximum ambient temperature of 43°C at 60% relative humidity, making it appropriate for Australian commercial kitchens without performance degradation.
What size gastronorm pans fit in this unit?Each section includes one shelf that is GN1/1 pan compatible. The shelf supports up to 40 kg, accommodating full-size hotel pans for ingredient or prep storage.
What refrigerant does the XUB7C13S2V use?It uses R290 (propane), a natural refrigerant with a low global-warming potential. The cabinet insulation is 60mm HFC and CFC-free foam, contributing to efficient operation at 2.623 kWh per 24 hours.
What warranty does the XUB7C13S2V carry?FED-X provides 2 Years Parts and Labour plus an additional 2 Years Parts Only, provided the unit is registered within 14 days of the invoice date. Total coverage is up to 4 years with registration.
The FED-X XURF1410S2V is a four-door split upright storage freezer designed for high-volume commercial kitchen environments requiring large-capacity, reliable low-temperature storage. The 1/2 split door system divides each column into two independently operating doors, enabling rapid access while minimising temperature recovery time and reducing annual running costs by up to 30%.Why operators choose the XURF1410S2V
945 L net capacity — stores large volumes of frozen product across three 2/1 GN-compatible shelf levels per section, each rated to 40 kg.
Split door energy saving — four independent hinged doors limit cold-air loss to the opened section only; ideal for high-traffic kitchens.
Tropicalised for Australian conditions — rated to 43°C ambient, 60% RH, handling the heat and humidity of AU commercial environments without performance drop.
R290 natural refrigerant — low global-warming-potential refrigerant with HFC/CFC-free 60mm foam insulation throughout the body.
EBM-PAPST fans & Dixell controls — premium evaporator and condenser fans with user-friendly digital temperature controls; Embraco/Secop compressor.
Specifications
Brand
FED-X
Model / MPN
XURF1410S2V
Type
Upright Storage Freezer
Gross Volume
1410 L
Net Volume
945 L
Doors
4 (split 1/2 — 2 upper + 2 lower)
Door Type
Hinged, solid stainless steel
Temperature Range
-18 to -22°C
Refrigerant
R290
Cooling System
Fan-forced
Compressor
Embraco / Secop
Controller
Dixell
Ambient Temperature
43°C, 60% RH
Total Energy Consumption
10.33 kWh/24h
Construction
Stainless steel interior & exterior, rounded corners, 60mm HFC/CFC-free foam insulation
Shelves
3 levels of 2/1 GN compatible shelves; each shelf rated 40 kg; accommodates 2 x 1/1 GN pans
Internal Dimensions
1364 x 702 x 1401mm (W x D x H)
Product Dimensions
1480(W) x 830(D) x 2000(H)mm
Packed Dimensions
1505(W) x 1480(D) x 2070(H)mm
Net Weight
201 kg
Packed Weight
260 kg
Power
240V; 795W / 4.8A
Mobility
Heavy-duty castors with front-wheel brakes
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Venue suitability: The XURF1410S2V suits large commercial kitchens, central production facilities, hotel banquet operations, aged-care facilities, and high-volume catering businesses that require continuous-access frozen storage for bulk product. Explore the full range of Commercial Upright Freezers or shop by brand in the FED-X collection.Installation & delivery: Requires a 240V / 10A single-phase power outlet. Allow adequate clearance around condenser vents (top-mounted). Unit arrives on heavy-duty castors for easy positioning; front-wheel brakes lock it in place. Dispatched Australia-wide.Frequently asked questionsWhat is the net storage capacity of the XURF1410S2V?The net usable storage volume is 945 L across three 2/1 GN-compatible shelf levels per section. The gross cabinet volume is 1410 L.What refrigerant does the XURF1410S2V use?It uses R290, a natural hydrocarbon refrigerant with a very low global-warming potential. The 60mm body insulation is HFC- and CFC-free.Is this freezer suitable for hot Australian kitchens?Yes. The unit is tropicalised and rated to operate in ambient temperatures up to 43°C at 60% RH, making it suitable for Australian commercial kitchen conditions year-round.How does the split door system save energy?Each of the four doors opens independently so only the accessed section loses cold air. FED-X states this design can reduce yearly running costs by up to 30% compared to a full-width door.What shelf configuration does this freezer use?Each side of the cabinet has three shelf levels, each designed to hold 2 x 1/1 GN pans. Individual shelf weight rating is 40 kg.
The FED-X XURF650S1V is a commercial upright storage freezer with a split two-door design that lets operators access upper and lower zones independently, minimising cold-air loss and cutting running costs by up to 30% annually.
Why operators choose the XURF650S1V
Split half-door design — upper and lower zones open independently for rapid recovery and energy saving
465 L net capacity — three levels of 2/1 GN-compatible shelving supporting 40 kg per shelf
R290 natural refrigerant — eco-friendly with 60 mm HFC/CFC-free foam insulation for low running costs
Tropicalised to 43°C ambient — Dixell digital controller and EBM-PAPST fans maintain -18 to -22°C even in hot Australian kitchens
Stainless steel interior & exterior with rounded corners — self-closing lockable doors with heavy-duty magnetic seals and integrated handles for easy cleaning
Specifications
Brand
FED-X
Model / MPN
XURF650S1V
Type
Upright Storage Freezer
Net Capacity
465 L
Gross Volume
650 L
Doors
2 (split half-door, hinged, solid, self-closing, lockable)
Shelves
3 levels × 2/1 GN compatible (40 kg per shelf)
Temperature Range
-18 to -22°C
Ambient Temperature Rating
43°C
Cooling System
Fan forced
Refrigerant
R290
Controller
Dixell digital
Fans
EBM-PAPST evaporator & condenser
Power
240V / 495W / 10A
Energy Consumption
6.81 kWh/24h
Insulation
60mm HFC/CFC-free foam
Defrost
Auto
External Dimensions
740(W) x 830(D) x 2000(H)mm
Internal Dimensions
624(W) x 702(D) x 1401(H)mm
Packing Dimensions
765(W) x 855(D) x 2070(H)mm
Net Weight
126 kg
Material
Stainless Steel (interior & exterior)
Country of Manufacture
China
Warranty
2 Years Parts & Labour + 2 Years Parts Only with Product Registration within 14 Days of Invoice
Venue suitability: The XURF650S1V suits high-volume commercial kitchens including restaurants, hotels, catering operations, and institutional food service. Its tropical rating and split-door energy saving make it especially well suited to Australian conditions and busy prep environments. Browse the full range in Commercial Upright Freezers or explore more from the FED-X collection.
Installation & delivery: Standard single-phase 240V connection required. Unit ships on heavy-duty castors with front wheel brakes — no special installation tools needed. Dispatched Australia-wide.
Frequently asked questions
Q: What is the net storage capacity of the XURF650S1V?A: The net capacity is 465 L across three shelf levels per section, each shelf rated to 40 kg and compatible with 2/1 GN pans.
Q: What refrigerant does this unit use?A: The XURF650S1V uses R290, a natural hydrocarbon refrigerant with very low global warming potential, contained within 60 mm HFC/CFC-free foam insulation.
Q: Is this freezer suitable for Australian tropical climates?A: Yes — it is tropicalised and rated for ambient temperatures up to 43°C at 60% relative humidity, making it ideal for Australian commercial kitchens including those in Queensland and the Northern Territory.
Q: What warranty does the XURF650S1V come with?A: FED-X provides 2 Years Parts & Labour plus an additional 2 Years Parts Only warranty when you register the product within 14 days of invoice — 48 months total parts coverage.
Q: What does the split door design mean in practice?A: The unit features two independent half-doors stacked vertically. Opening only the top or bottom section retains cold air in the other zone, reducing temperature recovery time and lowering energy consumption by up to 30% compared with a single full-height door.
The Thermaster LG-1563DF is a 1090-litre black upright three-glass-door display freezer engineered for high-throughput commercial environments. With a wide 1880 mm footprint, fan-forced cooling, and auto-defrost, it keeps frozen product at a consistent -18 to -22°C while keeping merchandise fully visible through its three-layer heated glass doors.
Why operators choose the LG-1563DF
Three self-closing hinged glass doors — slimline aluminium frames maximise product visibility while minimising cold-air loss on every open.
Three-layer Low-E heated glass — inner tempered, middle Low-E, outer heated layer eliminates condensation and keeps the display clear at all times.
Illuminated 343 mm LED light box — top-mounted branding panel plus LED canopy and internal cabinet lighting draw customer attention and support promotional signage.
Fan-forced cooling with auto-defrost — Secop compressor and top-mount fan system maintains uniform temperature across all three bays without manual intervention.
Stainless steel inner base — hygienic, easy to clean, and built to withstand the demands of daily commercial use.
Specifications
Brand
Thermaster
Model / MPN
LG-1563DF
Type
Display Freezer
Capacity
1090 L
Number of Doors
3
Door Type
Hinged, self-closing glass
Glass
3-layer: tempered inner, Low-E middle, heated outer
Temperature Range
-22°C to -18°C
Max Ambient Temperature
25°C / 60% RH
Cooling System
Fan force
Defrost
Auto-defrost
Compressor
Secop
Power
240V / 1.85 kW / 15A
Power Type
Electric
Lighting
LED light box (343 mm) + LED canopy + LED internal
External Colour
Black
Internal Colour
White
Mobility
Castors
Product Dimensions
1880(W) x 750(D) x 2092(H) mm
Internal Dimensions
1760 x 580 x 1538 mm
Package Dimension
770(W) x 1905(D) x 2220(H) mm
Net Weight
323 kg
Warranty
2 Years Parts & Labour + 2 Years Parts Only (register within 14 days of invoice)
Country of Manufacture
China
Venue suitability: Ideal for supermarkets, convenience stores, bottle shops, service stations, cafeterias, and any high-volume retail environment requiring a large-capacity, highly visible frozen-product display. The 1880 mm width fits standard gondola bays while the three-bay door layout allows simultaneous customer access. Explore the full commercial display freezer range or browse all Thermaster refrigeration equipment.
Installation & delivery: The LG-1563DF ships flat-packed on a pallet (770 x 1905 x 2220 mm packed) and arrives ready to install — castors included for easy positioning. Standard electrical connection 240V/15A. Review our warranty information and ensure the unit is registered within 14 days of invoice to activate the full 4-year cover. Dispatched Australia-wide.
Frequently asked questions
What temperature does the LG-1563DF operate at?The LG-1563DF maintains a temperature range of -22°C to -18°C, making it suitable for storing all standard frozen foods, ice cream, and frozen beverages.
Does the glass door fog up in a warm shop environment?No. The outer pane of the three-layer glass is heated, which prevents condensation and keeps the display clear even in warm or humid ambient conditions up to 25°C / 60% RH.
What is included with the unit?The freezer ships with castors pre-fitted. Shelving is included inside the cabinet. Confirm exact shelf count and any accessories with our sales team at the time of order.
What power connection does this freezer require?The LG-1563DF requires a standard 240V single-phase connection rated at 15A. Ensure your site has a dedicated 15A outlet before installation.
What warranty does the LG-1563DF carry?Thermaster provides 2 years parts & labour plus a further 2 years parts-only cover — 4 years total — when the unit is registered with Thermaster within 14 days of invoice date.
The Thermaster HF200G S/S is a commercial glass-door display freezer that keeps frozen goods at -25 to -10°C while maintaining full product visibility through its triple-glazed heated-filament glass door — ideal for cafes, delis, and convenience stores that need accessible frozen storage with front-facing display.
Why operators choose the HF200G S/S
Triple-glazed heated glass door — prevents condensation for a clear view of frozen stock at all times
78L net capacity — compact underbench footprint (600 x 600 x 850mm) with 2 adjustable shelves plus floor
LED internal lighting — energy-efficient illumination that enhances product presentation without excess heat
60mm high-density CFC & HCFC-free insulation — maximises thermal efficiency and meets modern environmental standards
Locking door with rounded internal corners — secure storage with hygiene-friendly design that simplifies cleaning
Specifications
Brand
Thermaster
Model / MPN
HF200G S/S
Type
Glass Door Display Freezer
Capacity (Net)
78 L
Capacity (Gross)
129 L
Temperature Range
-25 to -10°C
Max Ambient Temperature
30°C, 55% RH
Doors
1 (Hinged, Triple-Glazed Glass)
Shelves
2 shelves plus floor
Shelf Dimensions
400 x 415mm
Defrost Type
Manual
Power
240V; 270W; 10A
Power Type
Electric
Energy Consumption
5.483 kWh/24h
External Material
Stainless Steel
Product Dimensions (W x D x H)
600 x 600 x 850mm
Packed Dimensions (W x D x H)
680 x 670 x 1050mm
Net Weight
44.5 kg
Castors
Yes
LED Lighting
Yes
Locking Door
Yes
Warranty
2 Years Parts & Labour + 2 Years Parts Only (with product registration within 14 days of invoice)
Country of Manufacture
China
Venue suitability: The HF200G S/S suits cafes, convenience stores, delis, service stations, and small commercial kitchens where underbench space is limited and frozen product needs to remain visible to staff or customers. Browse our full range of Display Freezers or explore the complete Thermaster refrigeration collection.
Installation & delivery: Plug-and-play 240V single-phase connection; no installation required beyond levelling and allowing 24h pre-chill before loading. Dispatched Australia-wide.
Frequently asked questions
What is the net storage capacity of the HF200G S/S?The net storage capacity is 78 litres, across 2 shelves plus the floor. The gross (internal) volume is 129 litres.
What temperature range does the HF200G S/S operate at?The unit operates between -25°C and -10°C, making it suitable for storing ice cream, frozen meals, and other commercial frozen goods.
Does the glass door get foggy?No. The door features triple-glazing with a heated filament that prevents condensation, maintaining clear visibility of stock at all times.
What power supply does the HF200G S/S require?It runs on standard 240V single-phase Australian power at 270W / 10A. No special wiring or three-phase supply is needed.
Does the unit come with castors?Yes, castors are included, making it easy to reposition for cleaning or layout changes.
The Skipio SUR9-3D-3 Two Drawer Underbench Fridge is a compact yet efficient refrigeration solution designed for small to medium-sized kitchens and foodservice establishments. With a width of 900mm, this underbench fridge is space-saving while offering ample storage capacity for perishable items. Its two spacious drawers provide convenient access to stored goods, allowing for easy organization and retrieval of ingredients during busy kitchen operations.
Equipped with advanced refrigeration technology, the Skipio SUR9-3D-3 ensures reliable performance and consistent temperature control to keep food items fresh and preserved. Its inner temperature range of -2~8°C is ideal for storing a variety of perishable goods, including fruits, vegetables, dairy products, and condiments. With a sleek design and user-friendly interface, this underbench fridge is a versatile solution for commercial kitchens, cafes, restaurants, and other foodservice establishments seeking to optimize their storage space and maintain food quality.Specifications:Cabinet dimension: W900 * D700 * H855 (mm)Capacity:179ℓInner Temperature: -2~8℃Refrigerant: R-134aInsulation Type: Polyurethane / Cyclopentane + CFC FreePower: 314WVoltage: 240V / 50Hz / 1PhWeight: 84Kg
Cake and Food Display case.
Adjustable electronic controller with two digital displays
Heated glass panels front and sides (H model)
Adjustable shelving (height and angle) plus base
Rear double glazed argon doors with a magnetic door catch
On/off switches for lights and heated glass
Two piece white frosted polycarbonate shelves
Each shelf holds up to 40kg’s
Designed for 38°C ambient operation
On castors for mobility, packed in crate for shipment.
Product Dimensions: 1200(W) x 680(D) x 1200(H)mm
The AG Equipment FSB1500 is a three glass door upright display freezer that holds 1539 litres of frozen stock at retail-ready temperatures of -18°C to -22°C, built for high-traffic convenience stores, supermarkets and takeaways.
Why operators choose the FSB1500
1539 L across three glass doors — merchandises a large frozen range while keeping every product visible and selling.
R290 natural refrigerant — climate-friendly hydrocarbon refrigerant that runs efficiently and helps cut running costs.
Fan-forced ventilated cooling — even temperature distribution across all five shelf levels per door.
CAREL iJF electronic controller — precise temperature control with logging, fault alarms and Bluetooth app connectivity.
Castor wheels and internal LED lighting — easy to reposition and bright product presentation out of the box.
Specifications
Brand
AG Equipment
Model / MPN
FSB1500
Type
Display Freezer
Capacity
1539 L
Doors
3 glass doors
Shelves
5 adjustable wire shelves per door
Temperature Range
-18°C to -22°C
Ambient Temperature
32°C / 70% humidity
Refrigerant
R290 (150g x2)
Cooling
Fan-forced ventilated
Controller
CAREL iJF electronic
Compressors
2 x Embraco NEX2180UB
Input Power
1600 W
Voltage
220–240V, 50Hz
Current
8 A (15 Amp plug)
Energy Consumption
32 kWh / 24hr
Product Dimensions
1890(W) x 730(D) x 2010(H)mm
Internal Dimensions
1770 x 530 x 1555mm
Package Dimensions
1940(W) x 780(D) x 2160(H)mm
Net Weight
380 kg
Colour
Black
Material
Powder-Coated Steel
Warranty
24 months parts & labour
Venue suitability: Suited to convenience stores, supermarkets, local marts, bars and takeaways that need to merchandise a large frozen range in a high-visibility, customer-facing freezer.
Browse the full range of Display Freezers or see more refrigeration from AG Equipment to compare door configurations and capacities.
Installation & delivery: Requires a 15 Amp plug, a level surface, 20cm wall clearance and no direct or radiated heat; clean the condenser monthly for best performance. Dispatched Australia-wide.
Frequently asked questions
How much can the FSB1500 hold? It offers 1539 litres of frozen storage across three glass doors with five adjustable wire shelves per door.
What temperature does it run at? The freezer operates between -18°C and -22°C with fan-forced ventilated cooling for even distribution.
What refrigerant does it use? It uses R290, a natural hydrocarbon refrigerant (150g x2 charge) that is energy-efficient and free of ozone-depleting properties.
What power supply does it need? It runs on a 220–240V 50Hz supply drawing around 8 amps and is installed with a 15 Amp plug.
What warranty is included? The FSB1500 comes with a 24-month parts and labour warranty from AG Equipment.
The AG Equipment FSB1000 is a two-glass-door upright display freezer that holds frozen stock at -18°C to -22°C while keeping every product on clear, lit display for self-serve retail.Why operators choose the FSB1000
1000-litre dual-door capacity — five adjustable wire shelves per door merchandise high volumes of frozen lines in one footprint.
R290 natural refrigerant — non-toxic, ozone-friendly and energy-efficient, run by twin compressors for fast pull-down.
Carel iJF electronic controller — precise temperature control with fault alarms and Bluetooth app connectivity.
Glass doors with internal LED lighting — bright, full-height product visibility that drives impulse purchases.
Mobile on castors — pre-fitted castor wheels let staff reposition the cabinet for cleaning and floor changes.
Specifications
Brand
AG Equipment
Model / MPN
FSB1000
Type
Upright Glass-Door Display Freezer
Capacity
1000 Litres
Doors
2 glass doors
Shelves
5 adjustable per door
Temperature range
-18°C to -22°C
Ambient temperature
32°C / 70% humidity
Refrigerant
R290 (150g x2)
Cooling
Fan-forced ventilated
Input power
1400 W
Voltage
220-240 V
Current
6 A (15 A plug)
Frequency
50 Hz
Energy consumption
23 kWh/24hr
Controller
Carel iJF electronic
External dimensions
1260(W) x 730(D) x 2010(H)mm
Internal dimensions
1140 x 530 x 1555mm
Package dimensions
1310 x 780 x 2160mm
Net weight
300 kg
Shipping weight
320 kg
Body
Powder-coated steel, black
Warranty
24 months parts & labour
Venue suitability: Built for convenience stores, supermarkets, local marts, bars and takeaways that move high volumes of frozen and chilled lines and need full-height self-serve display. Browse more Display Freezers or see the full range from AG Equipment.Installation & delivery: Plugs into a standard 15 A outlet; site on a level surface with ventilation clearance and clean the condenser monthly for best performance. Dispatched Australia-wide.Frequently asked questionsWhat temperature does the FSB1000 hold? The freezer is set between -18°C and -22°C using its Carel iJF electronic controller.How much can it store? It offers 1000 litres of capacity across two glass doors with five adjustable wire shelves per door.What refrigerant does it use? It runs on R290, a natural, non-toxic and energy-efficient refrigerant, charged at 150g per compressor across two compressors.What power supply does it need? It connects to a 220-240 V, 50 Hz supply via a 15 A plug and draws around 6 A, with input power of 1400 W.What warranty is included? The FSB1000 is covered by a 24-month parts and labour warranty from AG Equipment.
The AG Equipment FSB450 is a single glass-door upright display freezer that keeps frozen stock visible, organised and merchandised at -18°C to -22°C for convenience stores, supermarkets, bars and takeaways.Why operators choose the FSB450
450 L glass-door display — frozen product stays visible and self-selling behind a double-glazed door.
5 adjustable wire shelves — reconfigure the layout to suit pack sizes and rotate stock easily.
R290 natural refrigerant — efficient, low-GWP cooling with a Carel iJF electronic controller.
Fan-forced cooling — even temperature distribution across all shelves down to -22°C.
Powder-coated body on castors — durable black finish that rolls into position and locks the working layout.
Specifications
Brand
AG Equipment
Model / MPN
FSB450
Type
Single Glass Door Upright Display Freezer
Capacity
450 L
Doors
1 (double-glazed glass)
Shelves
5 adjustable wire shelves
Temperature range
-18°C to -22°C
Ambient temperature
32°C / 70% humidity
Refrigerant
R290 / 150g
Cooling
Fan-forced
Controller
Carel iJF electronic
Power
220–240V / 50Hz / 3A / 700W
Energy consumption
12 kWh/24hr
Internal dimensions
510 x 530 x 1555mm
Product dimensions
630(W) x 730(D) x 2010(H)mm
Package dimensions
680(W) x 780(D) x 2160(H)mm
Net weight
200 kg
Shipping weight
215 kg
Colour
Black
Warranty
24 months parts & labour
Venue suitability: Built for high-traffic retail and hospitality — convenience stores, supermarkets, local marts, bars and takeaways that need to merchandise frozen stock at the point of sale.For more frozen-merchandising options browse our Display Freezers range, or see the full AG Equipment line-up for matching refrigeration.Installation & delivery: Place on a level surface, clear of direct sunlight and heat sources, with at least 20cm rear clearance for ventilation. Dispatched Australia-wide.Frequently asked questionsWhat temperature does the FSB450 hold? It operates between -18°C and -22°C, suitable for displaying and storing frozen goods.How many shelves does it have? Five adjustable wire shelves that can be repositioned to suit your product sizes.What refrigerant does it use? R290 (150g), a natural, low-GWP refrigerant paired with a Carel iJF electronic controller.What warranty is included? A 24-month parts and labour warranty backed by AG Equipment.What power supply does it need? A standard 220–240V / 50Hz single-phase outlet; it draws around 3A at 700W.